DESIGN ® Phone: 800-243-6125 ■ FAX: 203-758-8271 E-Mail: [email protected]12-52 Pin Hub — 3mm Bore ■ Split Hub — 3mm Bore ■ Hubless — 9.525mm Bore SPUR GEARS — 0.25 Module ■ 1.58, 2.38 and 3.18mm Face Width ■ 20 o Pressure Angle Lightening Holes Optional Consult Factory ▼ For Gear Hubs See Pages 12-65 & 12-66 * Standard Quality Level — No suffix on part number when ordering standard quality level. i.e. MSG3-24 Specify quality level for T6 / T5 orders. i.e. MSG3-24-T5 *
13
Embed
SPUR GEARS — 0.25 Module - Servo Vision · For Gear Hubs See Pages 12-65 & 12-66 * Standard Quality Level — No suffix on part number when ordering ... SPUR GEARS — 0.7 Module
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
SPUR GEARS — 0.25 Module ■■■■■ 1.58, 2.38 and 3.18mm Face Width ■■■■■ 20o Pressure Angle
Lightening Holes OptionalConsult Factory
▼
For Gear Hubs See Pages 12-65 & 12-66
* Standard Quality Level —No suffix on part number when orderingstandard quality level. i.e. MSG3-24Specify quality level for T6 / T5 orders.i.e. MSG3-24-T5
* Standard Quality Level —No suffix on part number when orderingstandard quality level. i.e. MHS3-60Specify quality level for T6 / T5 orders.i.e. MHS3-60-T5
* Standard Quality Level —No suffix on part number when orderingstandard quality level. i.e. MSG7-25Specify quality level for T6 / T5 orders.i.e. MSG7-25-T5
*
FOR SPECIAL SPUR GEARS, ORDER AS FOLLOWS:For Unlisted Number of Teeth, Specify the Number of Teeth Desired.EXAMPLE: MSG7-24 and MSG7-25 are in the above table, for a 27 tooth gearspecify Part Number MSG7-27.
SPUR GEARS — 0.4 Module ■■■■■ 3.18 and 4.76mm Face Width ■■■■■ 20o Pressure Angle
Pin Hub — 6mm Bore
* Standard Quality Level —No suffix on part number when orderingstandard quality level. i.e. MSG11-26Specify quality level for T6 / T5 orders.i.e. MSG11-26-T5
* Standard Quality Level —No suffix on part number when orderingstandard quality level. i.e. MHS6-48Specify quality level for T6 / T5 orders.i.e. MHS6-48-T5
* Standard Quality Level —No suffix on part number when orderingstandard quality level. i.e. MSG15-60Specify quality level for T6 / T5 orders.i.e. MSG15-60-T5
SPUR GEARS — 0.5 Module ■■■■■ 3.18 and 4.76mm Face Width ■■■■■ 20o Pressure Angle
*
* Standard Quality Level —No suffix on part number when orderingstandard quality level. i.e. MSG19-20Specify quality level for T6 / T5 orders.i.e. MSG19-20-T5
* Standard Quality Level —No suffix on part number when orderingstandard quality level. i.e. MSG43-20Specify quality level for T6 / T5 orders.i.e. MSG43-20-T5
* Standard Quality Level —No suffix on part number when orderingstandard quality level. i.e. MSG23-16Specify quality level for T6 / T5 orders.i.e. MSG23-16-T5
FOR SPECIAL SPUR GEARS, ORDER AS FOLLOWS:For Unlisted Number of Teeth, Specify the Number of Teeth Desired.EXAMPLE: MSG23-28 and MSG23-30 are in the above table,for a 27 tooth gear specify Part Number MSG23-31.
* Standard Quality Level —No suffix on part number when orderingstandard quality level. i.e. MSG25-16Specify quality level for T6 / T5 orders.i.e. MSG25-16-T5
SPUR GEARS — 0.8 Module ■■■■■ 3.18 and 4.76mm Face Width ■■■■■ 20o Pressure Angle
For Gear Hubs See Pages 12-65 & 12-66
▼
Lightening Holes OptionalConsult Factory
*
* Standard Quality Level —No suffix on part number when orderingstandard quality level. i.e. MSG27-22Specify quality level for T6 / T5 orders.i.e. MSG27-22-T5