This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
S P R I N G S
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
MaterialStainless Steel wire to DIN 17224 with plain surface finish.Music wire to DIN 17223 Class C with oiled finish.
If the dimensions you require are not listed, please contact us for a quote as we are able to supply many more sizes on request.
Note: Extension springs have a uniform body diameter and are produced with full twist loops the same diameter as the body. They are wound with initial tension, therefore some force is required before the coils are initially separated.
https://amironic.co.il/
https://amironic.co.il/
S P R I N G S
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
If the dimensions you require are not listed, please contact us for a quote as we are able to supply many more sizes on request.
Note: Extension springs have a uniform body diameter and are produced with full twist loops the same diameter as the body. They are wound with initial tension, therefore some force is required before the coils are initially separated.
https://amironic.co.il/
https://amironic.co.il/
S P R I N G S
Product information updated April 2016 and subject to change. Please contact Sales for the latest prices and availability.
MaterialStainless Steel wire to DIN 17224 with plain surface finish.
Other Info.Ends: German loops closed. End position will vary. Tolerances: All dimensions and forces to DIN2097 (Grade 2).
To determine the load at any working length use:- (Rate x deflection) + initial tension.Initial tension is for reference only and may vary.
D0
L
IT
L1
dP1
If the dimensions you require are not listed, please contact us for a quote as we are able to supply many more sizes on request.
Note: Extension springs have a uniform body diameter and are produced with full twist loops the same diameter as the body. They are wound with initial tension, therefore some force is required before the coils are initially separated.