This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Spring PlungersPressure Pins : 0.5 - 130N, M3 - M24
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
N
Threaded pin glued in
D
T
F1
F2T1
D1
HL S
BSM3BSM4BSM5BSM6BSM8BSM10BSM12BSM16BSM20BSM24
BSM4PBSM5PBSM6PBSM8PBSM10PBSM12PBSM16P
BSM5SSBSM6SSBSM8SSBSM10SSBSM12SS
£4.54£3.48£3.39£3.53£4.16£4.66£6.05£6.70£7.91
£12.74
£4.05£3.95£4.05£4.73£5.64£7.15£8.73
£9.98£9.95
£11.08£15.12£20.48
PartNumber D D1 L H T T1 N S
Approx.weight
g
Spring forceInitial
PressureF1 ca. N
FinalPressureF2 ca. N
PriceEach1 - 19
M3M4M5M6M8M10M12M16M20M24
M4M5M6M8M10M12M16
M5M6M8M10M12
1.01.52.42.73.54.06.07.5
10.012.0
1.52.42.73.54.06.07.5
2.42.73.54.06.0
10151820222228324052
15182022222832
1820222228
1.51.52.32.53.03.04.05.07.0
10.0
1.52.32.53.03.04.05.0
2.32.53.03.04.0
1.52.02.02.53.03.55.06.08.0
10.0
2.02.02.53.03.55.06.0
2.02.53.03.55.0
1.00.60.81.01.41.42.02.53.03.0
1.00.60.81.01.41.42.0
0.81.01.41.42.0
0.40.60.81.01.21.62.02.52.52.5
0.60.81.01.21.62.02.5
0.81.01.21.62.0
0.71.31.52.02.53.04.05.06.08.0
1.31.52.02.53.04.05.0
1.52.02.53.04.0
0.556799
10456080
56799
1045
5678
10
3162020353555
100120130
162020353555
100
1717293147
0.40.81.32.56.09.0
16.035.066.3
122.2
0.81.32.56.09.0
16.035.0
1.32.56.09.0
16.0
MaterialSteel, quality class 5.8.Pressure Pin: Steel or Plastic.Stainless Steel version in 1.4305.Surface Finish: Black oxide finish. Pressure pin in steel or stainless steel, both hardened.
Other Info.Spring plungers serve for positioning and indexing, and also as hold-down and knock-out pins. They are used, for example, in fixture and tool shops.Fitting key available. Please ask for a quote.
MaterialSteel, quality class 5.8. Pressure Pin: Steel, plastic or Stainless Steel 1.4305. Long-Lok Thread: NylonSurface Finish: Black oxide finish. Stainless steel bright finish. Pressure pin in steel or stainless steel, both hardenedOther Info.Advantages: Secure in the case of vibrations; Extremely high unscrewing movement; Secure in every position; Saves assembly and stock keeping; For repeateduse; Problem solver from M3 to M16. Spring plungers serve for positioning and indexing, and also as hold-down and knock-out pins. They are used, for example,in fixture and tool shops. Fitting key available. Please ask for a quote.
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
D N
F1
F2
D1
H
BPM3 - BPM6
BPM8 - BPM16
L
L1 L2
L2 L1
Slide arresting feature
MaterialSteel, quality class 5.8, or Stainless Steel.Long-Lok thread in nylonSurface Finish: Black oxide finish. Ball hardened, bright. Stainless steel, bright.
Other Info.Advantages:• Secure in the case of vibrations.• Extremely high unscrewing movement• Secure in every position• Saves assembly and stock keeping• For repeated use• Problem solver from M3 to M16
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialBody: Threaded zinc-plated, black oxide and hardened Steel Ends: With female thread (type I), pointed nose (type K), semi-spherical (type H) & prism (type P)Steel Spring: Normal end-force (bright zinc-plated) or heavy end-force (tropical yellow zinc-plated).
Other Info.These spring elements are universal pressure elements used for detenting, positioning or for clamping pieces by means of the pressure of a loaded spring.
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialBody: Hardened nickel-plated steel partially coated with MVK and locking patch for threads.Ball: Hardened steelSpring: Stainless steelSupply Cable: Grey two-phase for normally open contacts or black cable for normally closed contacts. Maximum Tensile Load: 20N.
Other Info.Working Temperature: -40°C to +170°C.Electrical characteristic of the switch:Electrical Supply: 20 mA DC / 50 mA DCVoltage: 24VSafety Standard: IP40Supply Cable: diameter 2.8mm, 2 phasesWorking Temperature: -10°C to +50°CAverage Switch Life-span: 5,000,000 switching.
On request and for sufficient quantities PFB blue instant locking patch for threads are available; working temperature from -50°C to +90°C.
Warning: if the screw-in thread is earthed the blue cable has to be connected to the mass.
Threaded bolt spring plungers are used for locking or releasing piece by using a built-in electrical switch.
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialThreaded:Body: Acetal resin with screwdriver slotted head.Spring: Stainless steelBall: Hardened stainless steel or acetal resin ballWorking Temperature (Acetal ball): -30°C to +50°C
Double Ended:Body: Brass.Spring: Stainless steelBall: Hardened stainless steel.Double ended spring plungers are the result of a furtherdevelopment of threaded spring plungers for special applications.
Other Info.The screwdriver slot on the head of the plunger is also useful to provide an indication ofthe position of the blocked element.AISI 304 Stainless Steel offers high corrosion resistance and allows use on machines andequipment in those sectors where laws or particular hygienic, climatic and environmentalfactors make it mandatory to use corrosion resistant materials.
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialBody: Black oxide steel partially coated with PFB blue instant locking patch for threads.Plunger: Black oxide ground hardenedSpring: Steel with normal end-force or with heavy end-force (non-burnished hexagon socket)
Other Info.Working Temperature: -50°C to +90°C.
On request and for sufficient quantities, MVK red locking patch for threads are available; Working temperature from -40°C to +170°C.
Long stroke threaded spring plungers are normally used for machining metal sheet as ejectors,for push-on or push-off operations or as cushioners.
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialBurnished ground hardened steel.
Other Info.Striker bushings are used together with ball or bolt spring plungers when a contact surface is requiredwith high wear resistance. In particular they are recommended for use with plungers with high-loadedsprings and plungers with reinforced springs.
Product information updated 1st April 2011 and subject to change. Please contact Sales for the latest prices and availibility.
ondrives
MaterialEccentric Bushings: Burnished steel.Indent Blocks: Hardened black oxide sintered steel.
Other Info.Eccentric Bushings: eccentric bushings are used to correctly position side thrust pins. Using the eccentric bushings, the thrust pin can be positioned veryprecisely to adopt to the tolerance of the piece to be mounted.Indent Blocks: indent blocks are used together with spring plungers for detenting or positioning sliding parts, flaps or for similar applications.