ICNR and WeRob 2018 Sponsor and Exhibitor Program Guide Please contact [email protected]or [email protected]Sponsor and Exhibitor Program Guide International Conference on NeuroRehabilitation International Symposium on Wearable Robotics October 16-20, 2018 Pisa, Italy
9
Embed
Sponsor and Exhibitor Program Guide - ICNR 2018 · 2018-09-18 · ICNR and WeRob 2018 Sponsor and Exhibitor Program Guide Please contact [email protected] or [email protected] Dear
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
ICNR and WeRob 2018 Sponsor and Exhibitor Program Guide
We invite you to the 2018 International Conference on NeuroRehabilitation (ICNR2018) and to the 2018 International Symposium on Wearable Robotics (WeRob2018). Both events will be held in Italy for the first time.
Researchers and innovators from all around the world will discuss novel approaches, challenges and potential solutions in technologies for robots used in rehabilitation, as well as neural processes in neuromodulation and neuroplasticity and biomechanics. The conference and the symposium will encompass topics ranging from pediatric application of robots, recent innovations in wearable robotic technology, computational neurorehabilitation, physical human-robot interaction and interfaces, and solutions for the needs of persons with disabilities and the aging population.
The conference and symposium programs will include interactive workshops with engineers, clinicians, and end-users to promote collaboration among different disciplines, and an exhibition area for demonstrating the latest in wearable exoskeletons and rehabilitation robots.
We look forward to welcoming you to Pisa.
Sincerely,
ICNR and WeRob 2018 Co-Chairs,
Silvestro Micera, PhD
Professor, Scuola Superiore Sant'Anna
Professor, Ecole Polytechnique Federale de Lausanne
José Luis Pons Rovira, PhD
Director, Neural Rehabilitation Group
Cajal Institute
Professor, Spanish Council for Scientific Research (CSIC) Madrid, Spain
Prof. M. Chiara Carrozza, Scuola Superiore Sant’Anna
Prof. Maria Chiara Carrozza received the Laurea degree in physics from the University of Pisa, Italy, in 1990 and the
PhD in Engineering at Scuola Superiore Sant’Anna (SSSA), in 1994. Since November 2006, she is Full Professor of Biomedical Engineering and Robotics at Scuola Superiore Sant’Anna. Since Nov. 2004 to Oct. 2007, she was Director
of the Research Division and elected Member of the national Board of the Italian association of Biomedical
Engineering. Since Nov. 2007, she is Rector of Scuola Superiore Sant’Anna. She was visiting professor at the Technical University of Wien, Austria, with a graduate course entitled Biomechatronics, she is involved in the
scientific management of the Italy-Japan joint laboratory for Humanoid Robotics ROBOCASA, Waseda University,
Tokyo, and she is Guest Professor at the Zhejiang University, Hangzhou, China. She has scientific and coordination responsibilities within several research projects, funded under the Sixth and Seventh Framework Programme of the European Union (some recent projects are CYBERLEGs,
WAY, CogLaboration, Nanobiotouch, Evryon, SmartHand, Nanobiotact, Neurobotics, RobotCub, CyberHand) and under national and regional
programmes (some recent projects are OPERA, EARLYRehab, AMulos, OpenHand, Tectum, Rita, Safehand, Neuro-Bike). Since 2004 to 2007, she was the Coordinator of the ARTS Lab of SSSA. In the period 2006-2011 she supervised more than 45 PhD, Master and Bachelor theses and she
currently leads a group of about 35 researchers, PhD students and research assistants. She is author of several scientific papers (more than 85 ISI
papers and more than 150 papers in referred conference proceedings) and of 12 national and international patents. She served as Editor of at least 4 Special Issues of International Journals, as Member of Committees for at least 13 International Conference organizations, she gave more than 50
invited lectures and plenary speeches to national and international conferences, and she is a recipient of at least 11 awards. She is member and of the
IEEE Robotics and Automation Society (RAS) and of the IEEE Engineering in Medicine and Biology. She is member of the RAS Technical Committee “Micro/Nano Robotics and Automation”. Her research interests are in ambient assisted living, technical aids, biorobotics, rehabilitation
engineering, bionics, cybernetic hands, humanoid robotics, systems for functional replacements and augmentation, biomechatronic interfaces, tactile
sensors, artificial skin, harvesting microtechnologies, human touch.
Prof. Katja Mombaur, Heidelberg University
Katja Mombaur is a full professor at the Institute of Computer Engineering (ZITI) of Heidelberg University and head
of the Optimization in Robotics & Biomechanics (ORB) group as well as the Robotics Lab. She holds a diploma degree
in Aerospace Engineering from the University of Stuttgart and a Ph.D. degree in Mathematics from Heidelberg
University. She was a postdoctoral researcher in the Robotics Lab at Seoul National University, South Korea. She also
spent two years as a visiting researcher in the Robotics department of LAAS-CNRS in Toulouse. Katja Mombaur is
coordinator of the newly founded Heidelberg Center for Motion Research. She also is PI in the European H2020
project SPEXOR and the Graduate School HGS MathComp as well as in several national projects. Until recently, she
has coordinated the EU FP7 project KoroiBot and was PI in the EU projects MOBOT and ECHORD–GOP. She is
founding chair of the IEEE RAS technical committee Model-based optimization for robotics. Her research focuses on
understanding human movement and using this knowledge to improve motions of humanoid robots and in the interactions of humans with
exoskeletons, prostheses and external physical devices. Her particular interest is on dynamic motions such as walking, running, and other kinds of
motions in sports, as well as motions of daily life. She and her team use and develop dynamic models and optimization methods for motion studies,
based on the assumption that human movement is optimal. In this context they are also interested in inverse optimal control which can determine
what a human is optimizing in a given situation.
Prof. Herman van der Kooij, University of Twente
Prof. Dr. ir. Herman van der Kooij, (1970) received his Phd with honours (cum laude) in 2000 and is professor in
Biomechatronics and Rehabilitation Technology at the Department of Biomechanical Engineering at the University of
Twente, and Delft University of Technology, the Netherlands. His expertise and interests are in the field of human
motor control, adaptation, and learning, rehabilitation robots, diagnostic, and assistive robotics, virtual reality,
rehabilitation medicine, and neuro-computational modelling. He has published over 100 publications in the area of
biomechatronics and human motor control. He has directed approximately € 8.5 million in research funding over the
past 10 years, from which he gained expertise in the management of (inter)national medium-scale projects. He is
associate editor of IEEE TBME, member of IEEE EMBS technical committee of Biorobots and was member of several scientific program
committees in the field of rehabilitation robotics, bio-robotics, and assistive devices. He is co-group leader of the technology development for new
rehabilitation robotics workgroup of the Cost Action European Network on Robotics for NeuroRehabilitation and coordinator of the FP7 program
Symbitron. He is member of the program committee of the Dutch IMDI core on Neurocontrol, and of the NeuroSipe programme. At the UT he is
founder and head of Rehabilitation robotics laboratory that therapeutic robots for the rehabilitation of upper and lower extremities. He is founder and
head of the Virtual Reality Human performance lab that combines robotic devices, motion capturing and virtual environments.
Complimentary registration to ICNR and WeRob for up to four (4) people. One 4x2 booth with one table for sponsor information and/or for equipment demonstration, with priority on location choice. Product Exhibition Spotlight demo (15 minute product demo in exhibit area to all attendees). Logo recognition on ICNR and WeRob 2018 websites. Logo recognition on marketing media Logo on lanyard Logo on the conference stages
Platinum sponsor €5,000
Complimentary registration to ICNR and WeRob for up to four (4) people. One 3x2 booth with one table for sponsor information and/or for equipment demonstration. Product Exhibition Spotlight demo (15 minute product demo in exhibit area to all attendees). Logo recognition on ICNR and WeRob 2018 websites. Logo recognition on marketing media
Gold €4,000
Complimentary registration to ICNR and WeRob for up to two (2) people. One 2x2 booth with one table for sponsor information and/or for equipment demonstration. Product Exhibition Spotlight demo (15 minute product demo in exhibit area to all attendees). Logo recognition on ICNR and WeRob 2018 websites. Logo recognition on marketing media.
Silver €3,000
Complimentary registration to ICNR and WeRob for up to one (1) person. One table of space for sponsor information and/or for equipment demonstration. Logo recognition on ICNR and WeRob 2018 websites. Logo recognition on marketing media.
Gala dinner €5,000
Food and service cost is additional and will depending on dinner location
Special session/Workshop Sponsorship €1,500
Logo recognition on Special Session/Workshop meeting room and on ICNR and WeRob 2018 websites.
Logo recognition on signage at lunch and on ICNR and WeRob 2018 websites
A poster session €2,000
Logo recognition on signage at event and on ICNR and WeRob 2018 websites
CUSTOM OPPORTUNITIES
We are committed to helping you reach your audience. If you do not see an opportunity that works for you, please talk to us. ICNR and WeRob 2018 would be pleased to explore other marketing and recognition opportunities. Reach out to [email protected] or [email protected] with questions or to discuss opportunities.
ICNR & WeRob 2018 Sponsor and Exhibitor Information
Registrants are encouraged to visit the exhibit area during each day. This includes all refreshment breaks, lunches, and receptions, which will be held in the exhibit areas.
Exhibit Booth Selection/Placement Process
Exhibit booth selection and placement are on a first-come, first-serve basis. The organizer reserves the right to designate booth locations.
Venue Floor Plan
Venue – Palazzo dei congressi
For any needs related to Palazzo dei Congressi for the Conference and Symposium, you can contact [email protected] or [email protected]. A member of the Organizing Committee will assist you with any needs related to shipping, storage, delivery of any items, displays, or other local support needs.
Regulations Governing Exhibits
1. While every effort will be made to ensure that exhibits are secured at the Palazzo dei Congressi, neither the Organizing Committee nor Palazzo dei Congressi will assume responsibility for loss or damage to exhibits or other exhibition property.
2. Each exhibit is responsible for complying with all laws, ordinances and regulations pertaining to health, fire prevention and public safety. If an inspection indicates that an exhibit is neglecting to
comply with these regulations, the Organizing Committee may cancel all or some parts of a display that may be irregular at the exhibitor’s expense.
3. Please note that no outside food or beverage may be served at the conference or exhibit area. All food and beverage must be purchased, prepared and served by the Palazzo dei Congressi in compliance with the Food Safe Handling Regulations. Please contact the conference organizers if you are planning to serve any food or beverage.
4. The Organizing Committee reserves the right to restrict displays which, because of noise, methods of operation, materials or any other reason, have become objectionable, and to prohibit or remove any displays which, in the opinion of the Organizing Committee, detract from the general character of the conference.
Deposit/Payment Information
Payment of 30% is required within one (1) month of confirmed reservation to guarantee your sponsorship and/or exhibit location. Final payment is due no later than September 16, 2018.
Cancellation Policy
The exhibitor may cancel this contract provided that written notice is received by the Organizing Committee on or before September 16, 2018. Please send notice to [email protected] or [email protected]. The deposit will be charged for cancellations.
Conditions and Regulations
The Organizing Committee reserve the right to designate a sponsorship opportunity different from the preferred option or reserve the right to deny sponsorship opportunities. All funds are submitted in the form of unrestricted educational grants or as tuition bursaries.
The conference program is set by planning committees and financial contributors have no influence on the content. Sponsorship will be recognized as a financial contribution at appropriate levels as outlined in the sponsorship prospectus.