SPIRIT - ESP DE-SANDER SPECIFICATION Prevent solids from reducing oil production, and damaging equipment. In all production, naturally occurring gases and formation sand, salt, scale, corrosion, asphaltenes, and other solid contaminants enter the wellbore and create pumping inefficiencies that severely diminish production and can contribute to increased maintenance costs and unnecessary failures. The patented SPIRIT De-sander Sands/Solids Separator is a simple, effective tool that uses cyclonic motion for effective downhole separation. Applications The De-sander is designed to increase production output and decrease maintenance costs from lower volume wells. • Production volumes up to 3000+ bbl/day • Production flows with sand/solids contamination Key Features • Reduces excessive pump wear, surface equipment wear or damage, pump fouling, and flow line fouling • Restores and optimizes pump efficiency and longer component life • Easy to transport, assemble and run Available Sizes • 2-7/8”, 3.5”, and 4.5” doverals.com/spirit Casing Spiral Slots Cup Packer Ported Sub with 8 Holes Sand/Solids being captured in the Mud Joint Bull Plug Mud Joint 5 Fluid exits the ported sub/ packer assembly then travelling on the outside of the ESP motors to pump intake 3 Fluid sand/ solids then are forced to centrifuge pushing sand/solids to the out side 1 Oil, Sand/Solid & Water enter tool 2 Fluid velocity increases down 4 Clean sand/ solids free fluids move upword to ported sub/ packer assembly SPIRIT ESP De-sander