CHR, Inc. 54 Elizabeth St. #10 Red Hook, NY 12571 Tel: (845) 758-0700 [email protected]ISO9001:2015 FM55895 www.customheatersandresearch.com SPIRAL HEATERS CHR manufactured preformed silicone heaters to suit pipework and tubular applications, however, manufacturing techniques for standard preformed heaters meant that for small diameter pipes the heater could only be manufactured in short lengths for rigid pipe work. Through continued product development, CHR can now offer the Spiral Wrap Heater range to suit flexible or rigid pipes Key features Suitable for straight or curved pipe secons Robust spiral heang element. Easy to install. Can be supplied with incorporated temperature sensor for accurate control with a suitable controller. Stand alone heaters or parallel opon to cater for longer pipe runs.
2
Embed
SPIRAL HEATERS...now offer the Spiral Wrap Heater range to suit flexible or rigid pipes Key features Suitable for straight or curved pipe sections Robust spiral heating element. Easy
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Can be supplied with incorporatedtemperature sensor for accuratecontrol with a suitable controller.
Stand alone heaters or parallel optionto cater for longer pipe runs.
Specification
Heater material is robust silicone rubber coated glass fiber fabric
Maximum operating temperature of 392°F/200°C
Standard range to suit 1/4” (6.35mm) outer diameter pipe in six different lengths
Custom designs available to suit customer specific pipe diameter, length and Voltage
Typical power density approximately 0.3W/cm2
Supplied with 0.5m PTFE supply leads as standard for single heater installation but can also bemanufactured with 2 pairs of supply leads for parallel connection in a multi heater installation.
Optional temperature sensors, typically surface mounted Thermocouple or RTD
Applications
Fluid or Gas delivery systems
Semi-conductor processes
Frost protection
Anti-condensation
Heat loss maintenance in preheated systems
Manufacturing standards
EN60335-1:2012, EN61000-6-3:2007, EN61000-6-1:2007, EN61010-1:2010, EN55022 Class A, EN61000-3-2,