This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
78 2014-15 Master Catalog U S Shop Tools Sales: 800-243-7701 Fax: 800-342-3311 www.usshoptools.com
3, 4 & 6 JAW SET-TRU SCROLL CHUCKSWith Fine Adjustment, 0.0004” T.I.R.Forged Steel Body, Two-Piece Top Reversible Jaws
SET-TRU Scroll Chucks can be used for all machining operations where universal chucks are used, along with applications where universal scroll chucks require tighter tolerances. Outstanding accuracy, versatility and long life makes Bison SET-TRU chucks invaluable in the workshop and indispensable in the toolroom.
SET-TRU Chuck Features and Benefits:• Fine adjustment, 3 pinion design• Forged steel body • 4 micro adjustment screws provide .0004" T.I.R. repeatability• Two piece top and master jaws are American Standard tongue and groove• Scrolls are forged and fully hardened, thread flanks ground on both sides, then precisely balanced for longer life and higher accuracy• Each scroll is precisely balanced• Jaw teeth and guides on both sides are fully hardened and ground.• Each chuck is balanced within fine limits
Fully Machined Type A Fully Machined Type D Fully Machined Type LChuck Size Spindle Part
FEATURES:• High precision- .0005” TIR repeatability on duplicated parts through 12” chucks.• Semi-steel body• 2-piece reversible jaws for OD and ID work• Scroll and jaws hardened and ground for increased life and gripping force• Must be used with “Zero-Set” backplates from BTC
Additional Replacement Parts Also Available. Please Call For More Information.
D
U S Shop Tools Sales: 800-243-7701 Fax: 800-342-3311 www.usshoptools.com 2014-15 Master Catalog 81
LATHE C
HU
CK
SLIVE C
ENTER
SVISE JAW
SVISE A
CC
ESSOR
IESSTR
AIG
HT SH
AN
KC
OLLET H
OLD
ERS
TAP H
OLD
ERS
DR
ILL CH
UC
KS
CA
RB
IDE IN
SERTS
THR
EAD
ING
/GR
OO
VING
CU
TTING
TOO
LSM
AC
HIN
ERYPR
ECISIO
N TO
OLS
DEB
UR
RIN
GC
OO
LAN
T/FLUID
STO
OL STO
RA
GE
ADJUST-TRU MANUAL SCROLL CHUCKS Forged Steel Body-Style MODEL ATSCBUCK CHUCK is continuously striving to make its products better so that your production can be more efficient! Buck has engineered and built some of the finest chucks in the world for over 75 years. Replacement parts and accessories also available.
FEATURES: • Ajust-Tru- the original, renowned adjustment mechanism • Forged Steel Body• Hardened and ground scroll and jaws• 3 Jaw Model Recommended for general O.D. or I.D. workholding. These chucks remain accurate throughout the life of the chuck using the Ajust-Tru feature.• 6 Jaw Model is Ideal for thin wall and second operation machining. Eliminates the need for collets as a 6” chuck can handle the work of more than 100 separate collets.• Chucks supplied with jaws, wrench and mounting screws
FEATURES: • Adjust Tru® Style with semi-steel body• Hardened and ground scroll and jaws• Chucks supplied with Top & Master Jaws, Wrench & Mounting Screws• Replacement parts also available
Full Line Available!Please call for more information.
3-JAW SET-TRU SCROLL CHUCKSWith 2-Piece Reversible JawsFine Adjustment, 0.0006” TIRTMX SET-TRU Scroll Chucks can be used for all machining operations where universal chucks are used, along with applications where universal scroll chucks require tighter tolerances.
SET-TRU Chuck Features and Benefits:• Fine adjustment, 0.0006” TIR• Semi-steel or forged steel body• 4 micro adjustment screws provide .0004" T.I.R. repeatability• Two piece top and master jaws are American Standard tongue and groove• Scrolls are forged and fully hardened with thread flanks ground on both sides, then precisely balanced for longer life and higher accuracy• Each scroll is precisely balanced• Jaw teeth and guides on both sides are fully hardened and ground.• Plain back chuck- mounting plates required. Steel mounting plates are interchangeable with BISON Set-Tru chucks of same size.
TMX Set-Tru Chucks are provided with:• 1 set of hard master jaws• 1 set of hard top reversible jaws• 1 self-ejecting chuck wrench• 1 set of mounting bolts• 1 set of fine adjustment screws• 2 hex keys
Fully Machined Type A Fully Machined Type DChuck Size Spindle Part
LATHE CHUCKSAFETY WRENCHES• Spring-load sleeve ejects the wrench from the chuck after each use • Chamfered end for easy entry • Designed to provide proper loads for self-removal of the wrench weight • High visibility yellow handle• Helps prevent accidents
CHUCK KEYS
• Crafted from high quality tool steel• Available in standard and self-ejecting models• Sizes available from 1/4” to 9/16” square head size
• 100% blue cotton denim• “E” version includes waist pocket• “PR” version includes chest pocket w/ pen holder• One size fits all• 35” length x 28” wide
DENIM SHOP APRONS
Description Part Number Price Denim Apron w/ Chest SHOP-APRON-PR $8.99Denim Apron w/ Waist SHOP-APRON-E $6.99
Extremely accurate and guaranteed to maintain exceptional accuracy for an extended period of time, these chucks have a modern and compact design. For use whenever high precision machining is needed
• Forged or semi-steel body • All bearing surfaces are carefully hardened and precisely machined• Scroll is made of fine quality alloy steel and carefully case hardened• Thread flanks are ground on both sides• Each scroll is balanced• Teeth and guides are hardened and fully ground on both sides• 3 pinion design• Hardened and ground pinions
Two-Piece Reversible Jaw Chucks are provided with:• 1 set of hard master jaws• 1 set of hard top reversible jaws• 1 chuck wrench• 1 set of mounting bolts• 2 hex keys• Eye bolts for chucks 15” & larger
Solid Jaw Style Chucks are provided with:• 1 set of hard solid ID jaws• 1 set of hard solid OD jaws• 1 chuck wrench• 1 set of mounting bolts• 1 hex key• Eye bolts for chucks 15” & larger
Back View
Two-Piece Jaw Style Solid Jaw Style
BACKPLATES FOR SELF-CENTERING SCROLL CHUCKS
Type A Type D Type L
• Fits 3 and 4 jaw self-centering scroll chucks• Machined backplates for plain back chucks• May require additional machining to fit• Threaded backplates also available
B
84 2014-15 Master Catalog U S Shop Tools Sales: 800-243-7701 Fax: 800-342-3311 www.usshoptools.com
CH
UC
K J
AWS
LATH
E W
OR
KH
OLD
ING
MA
CH
INE
VISE
SVI
SE J
AWS
RET
ENTI
ON
KN
OB
SER
, DA
, TG
CO
LLET
STO
OLH
OLD
ERS
TAP
HO
LDER
SIN
DEX
AB
LE D
RIL
LSTU
RN
ING
& B
OR
ING
END
MIL
LS, D
RIL
LSTA
PS &
REA
MER
SA
BR
ASI
VES
MEA
SUR
ING
TO
OLS
MR
O &
SA
FETY
FLAT
STO
CK
/DR
ILL
RO
D3 JAW SELF-CENTERING SCROLL CHUCKSType A1 And A2 Direct MountWith Two-Piece Hard Reversible Jaws
BISON™ DIRECT MOUNT CHUCKS
A1/A2 Direct Mount Chucks-Type 3215Chuck Size Spindle Thru
3 JAW SELF-CENTERING SCROLL CHUCKSType L Direct Mount, With Two-Piece Hard Reversible Jaws
3 JAW SELF-CENTERING SCROLL CHUCKSThreaded Direct Mount, With Two-Piece Hard Reversible Jaws
• Type 3215• Type A1 & A2 direct mount chucks• Two piece “master jaw” style jaws• Semi-steel body• Type A1 spindles have a 2 bolt hole patterns, inside and outside the taper. Either an A1 or A2 chuck will fit• Type A2 spindles have a 1 bolt pattern outside the taper-only an A2 chuck will fit• Hardened and ground pinions
Type A1 MountBolt Hole Pattern
Type A2 MountBolt Hole Pattern
• Type 3245• Camlock type D1 direct mount chuck• Two piece “master jaw” style jaws• Semi-steel body• Hardened and ground pinions• Scroll is drop forged of alloy steel and case hardened
Two-Piece Reversible Jaw Chucks are provided with:• 1 set of hard master jaws• 1 set of hard top reversible jaws (American Std Tongue & Groove)• 1 chuck wrench• 1 set of mounting bolts• 2 hex keys
B
We Are Your Source ForBison & TMX Chucks And
Replacement Parts!
U S Shop Tools Sales: 800-243-7701 Fax: 800-342-3311 www.usshoptools.com 2014-15 Master Catalog 85
FEATURES:• 2-piece master jaw style jaws with top reversible jaws for ID and OD workholding• 0.003” TIR repeatability• Meets ASA specifications on duplicate parts for chucks through 12” diameter• Semi-steel body• Scroll and jaws hardened and ground
2-Piece Jaw Chucks are provided with:• 1 set of hard master jaws• 1 set of hard top reversible jaws• 1 self-ejecting chuck wrench• 1 set of mounting bolts• 2 hex keys• Eye bolts with 12” & 15” chucks
• Semi-steel body• Self-centering• “A” type or D-1” type direct mount• Chuck body is made of high quality cast iron• Pinions, jaw’s teeth and guidways are hardened and ground
• Semi-steel body • Chuck body is made of high quality cast iron• Two piece top and master jaws are American Standard tongue and groove• Scrolls plate is drop forged of fine alloy steel and case hardened• Pinions are hardened and ground• Jaw teeth and guides on both sides are fully hardened and ground.• Plain back chuck- mounting plates required
3 JAW SCROLL CHUCKSD
C
D
C
86 2014-15 Master Catalog U S Shop Tools Sales: 800-243-7701 Fax: 800-342-3311 www.usshoptools.com
CH
UC
K J
AWS
LATH
E W
OR
KH
OLD
ING
MA
CH
INE
VISE
SVI
SE J
AWS
RET
ENTI
ON
KN
OB
SER
, DA
, TG
CO
LLET
STO
OLH
OLD
ERS
TAP
HO
LDER
SIN
DEX
AB
LE D
RIL
LSTU
RN
ING
& B
OR
ING
END
MIL
LS, D
RIL
LSTA
PS &
REA
MER
SA
BR
ASI
VES
MEA
SUR
ING
TO
OLS
MR
O &
SA
FETY
FLAT
STO
CK
/DR
ILL
RO
D3 & 4 JAW FRONT MOUNTING SELF-CENTERING SCROLL CHUCKS With Top Reversible Jaws
3 Jaw Chuck Mounting Bolts
ChuckSize
ThruHole
Weight(lbs)
Part Number Price Thread Number
of Bolts5” 1.260” 10 BI-7812-0500 $511.72 5/16-18 x 2-1/4 36” 1.654” 17 BI-7812-0600 $573.90 3/18-16 x 2-3/4 38” 2.165” 32 BI-7812-0800 $660.04 3/18-16 x 3-1/4 6
10” 2.992” 52 BI-7812-1000 $884.75 1/2-13 x 3-1/2 612” 4.055” 87 BI-7812-1200 $1,410.83 5/8-11 x 4 6
15-3/4” 5.354” 163 BI-7812-1600 $2,223.92 5/8-11 x 4-1/2 6
• For use with applications where back mounting chucks cannot be used• 2-piece master jaw style jaws with top reversible jaws for ID and OD workholding• Semi-steel body• Also available in forged steel body
4 Jaw Chuck Mounting Bolts
ChuckSize
ThruHole
Weight(lbs)
Part Number Price Thread Number
of Bolts5” 1.260” 10 BI-7814-0500 $643.43 5/16-18 x 2-1/4 36” 1.654” 17 BI-7814-0600 $693.50 3/18-16 x 2-3/4 38” 2.165” 32 BI-7814-0800 $813.09 3/18-16 x 3-1/4 6
10” 2.992” 52 BI-7814-1000 $1,052.17 1/2-13 x 3-1/2 612” 4.055” 87 BI-7814-1200 $1,635.67 5/8-11 x 4 6
15-3/4” 5.354” 163 BI-7814-1600 $2,780.64 5/8-11 x 4-1/2 6
• Designed for use with BISON 3 and 4 jaw front mounting self-centering lathe chucks• Ideal for use on milling and drilling machines as well as on rotary tables with 3/6 and 4/8 slots• Base plates are supplied with four mounting bolts with t-nuts and one MT pin
Chuck Size
BaseDimensions
Thru-hole
Weight(lbs)
PartNumber Price
6” 8.46” x 6.50” 1.57” 31 PBA-MCA6 $1,075.008” 9.84” x 7.87” 2.17” 46 PBA-MCA8 $1,375.0010” 12.20” x 9.84” 2.76” 70 PBA-MCA10 $1,795.0012” 14.96” x 12.20” 3.94” 124 PBA-MCA12 $2,350.00
4 JAW SQUARE CHUCKLow Profile, Super Thin• Universal scroll chuck design• Super thin design allows greater Z-axis machining• Designed for fast and easy positioning on worktable• Ideal for pallet applications, standard mills, vertical machining centers, angle plates and tombstones• Master jaw style chuck. Accepts American standard tongue and groove top jaws
3 JAW ROUND CHUCKLow Profile, Super Thin• Three operating pinions positioned at a 45° angle for easier operation• Easy installation with flange type mounting• Accuracy: .001” repeatability on duplicate parts using the nominated pinion• Ideal for pallet applications, standard mills, vertical machining centers, angle plates and tombstones• Master jaw style chuck. Accepts American standard tongue and groove top jaws
FRONT MOUNTING/LOW PROFILE CHUCKS
4 JAW MACHINE FIXTURELow Profile, Self-Centering Forged Steel Body
Clamping RangeDia A Q B K C D E E1 F G H M=P S T OD ID Part Number Price6” 8.46 6.50 2.48 1.69 .709 1.772 .551 .709 .980 .433 2.64 5.669 .55 1.65 .1181-6.30 1.65-5.75 BI-7640-006 $1,339.90 8” 9.84 7.87 2.84 1.77 .709 2.362 .551 .709 1.06 .551 3.15 6.850 .55 2.17 .1575-7.48 1.97-7.84 BI-7640-008 $1,694.20
• Forged steel body with rectangular base• Ideal for all types of milling, grinding, drilling and tapping operations on vertical and horizontal CNC machines as well as conventional milling and grinding machines• All surfaces are hardened and precision ground, square and parallel to an accuracy of 0.0008”• Repeatability within 0.0004” TIR• Ideal for pallet applications• Comes with 1 set of two-piece reversible jaws (hard top and hard master jaws), 1 ratchet wrench, 1 angled wrench and 1 set of 2 mounting bolts with T-nuts and two T-slot keys
B
We Are Your Source ForBison & TMX Chucks And
Replacement Parts!
U S Shop Tools Sales: 800-243-7701 Fax: 800-342-3311 www.usshoptools.com 2014-15 Master Catalog 87
LATHE C
HU
CK
SLIVE C
ENTER
SVISE JAW
SVISE A
CC
ESSOR
IESSTR
AIG
HT SH
AN
KC
OLLET H
OLD
ERS
TAP H
OLD
ERS
DR
ILL CH
UC
KS
CA
RB
IDE IN
SERTS
THR
EAD
ING
/GR
OO
VING
CU
TTING
TOO
LSM
AC
HIN
ERYPR
ECISIO
N TO
OLS
DEB
UR
RIN
GC
OO
LAN
T/FLUID
STO
OL STO
RA
GE
4 JAW SELF-CENTERING SCROLL CHUCKSSemi-Steel Body Plain Back Chuck-Backplates RequiredTwo-Piece or Solid Jaw Style
BISON™ 4 JAW MANUAL CHUCKS
Two-Piece Reversible Jaw Chucks are provided with:• 1 set of hard master jaws• 1 set of hard top reversible jaws• 1 chuck wrench• 1 set of mounting bolts• 2 hex keys• Eye bolts for chucks 15” & larger
Master Jaw Style Type 3605 Solid Jaw Style Type 3604Chuck Size
• Semi-steel body • All bearing surfaces are carefully hardened and precisely machined• Scroll is made of fine quality alloy steel and carefully case hardened• Thread flanks are ground on both sides• Teeth and guides are hardened and fully ground on both sides• 3 pinion design• See page 68 for backplates
Solid Jaw Style Chucks are provided with:• 1 set of hard solid ID jaws• 1 set of hard solid OD jaws• 1 chuck wrench• 1 set of mounting bolts• 1 hex key• Eye bolts for chucks 15” & larger
4 JAW INDEPENDENT CHUCKSSemi-Steel Body, Type A1/A2 Direct MountWith Hard Solid Jaws• Semi-steel body • Solid jaws are made of high quality carbon steel and hardened• Designed to grip round or odd shaped work• Type A1 spindle has a 2 bolt hole pattern, inside and outside the taper. Either an A1 or A2 chuck will fit• Type A2 spindles have 1 bolt pattern outside the taper-only an A2 chuck will fit
Solid Jaw Style Chucks are provided with:• 1 set of hard solid reversible jaws• 1 wrench• 1 set of clamping bolts
4 JAW INDEPENDENT CHUCKSSemi-Steel Body, Type D1 Direct MountWith Hard Solid Jaws• Semi-steel body • Type D1 direct mount• Solid jaws are made of high quality carbon steel and hardened• Designed to grip round or odd shaped work
4 JAW INDEPENDENT CHUCKSSemi-Steel Body With Solid Jaws
Solid Jaw Chucks are provided with:• 1 set of hard solid reversible jaws• 1 self-ejecting chuck wrench• 1 set of mounting bolts• 1 hex key• Eye bolts with 12” to 20” chucks
• Solid jaw style• Semi-steel body• Plain back• Chuck body is made of high quality cast iron
C
B
88 2014-15 Master Catalog U S Shop Tools Sales: 800-243-7701 Fax: 800-342-3311 www.usshoptools.com
These chucks have jaws that are operated individually to allow solid gripping of oddly shaped and square work pieces. Semi-steel body. Chucks above 16” have 1 piece solid reversible jaws.
2-JAW SCROLL CHUCKSWith Soft Top Reversible Jaws• Type 3105• Semi-steel body• Self-centering• Plain back chuck- backplates required• Includes 1 set of hard master jaws, 1 set of soft top jaws, chuck wrench, 1 set of mounting bolts, 2 hex keys
LATHEGUARDS
• Clear LEXAN, Semi-Circular wrap-a-round guards• Heavy Duty Chrome-plated extension tube and hardware• Ready to mount; simply affix mounting bracket with two screws.• Back of shield is reinforced with wire-form housing• Locks in swing away or functional positions• Accepts 3 or 4-Jaw Chucks• Included mounting bracket
Lathe Size
Cnt Ht. (Shield Height)
For Use W/ Chucks
Up To (A)
Shield Width
Shield Length
Tube Length
Part Number Price
Small 3.9” 6” Dia 6 ¼” 7.8” 10” FXB-12999 $143.686 to 12 6” 8” Dia 6 ¼” 11.8” 10” FXB-13060 $159.77
12 to 16 8” 12” Dia 8” 15.8” 11 ½” FXB-13061 $182.76 16 to 20 10” 16” Dia 8” 19.70” 13” FXB-13062 $198.85 20 to 24 13” 20” Dia 8” 23.6” 13” FXB-13064 $227.59
3 JAW SELF-CENTERING CHUCKSMedium Duty, Steel BodyFlatback, A & D Mountings
• Maximum .003” TIR using nominating pinion• .001” repeatability using nominating pinion• 2 piece master jaw style chuck. Accepts American standard tongue and groove top jaws• Nitride hardened and ground scroll and three hardened pinions
D
B
U S Shop Tools Sales: 800-243-7701 Fax: 800-342-3311 www.usshoptools.com 2014-15 Master Catalog 89
LATHE C
HU
CK
SLIVE C
ENTER
SVISE JAW
SVISE A
CC
ESSOR
IESSTR
AIG
HT SH
AN
KC
OLLET H
OLD
ERS
TAP H
OLD
ERS
DR
ILL CH
UC
KS
CA
RB
IDE IN
SERTS
THR
EAD
ING
/GR
OO
VING
CU
TTING
TOO
LSM
AC
HIN
ERYPR
ECISIO
N TO
OLS
DEB
UR
RIN
GC
OO
LAN
T/FLUID
STO
OL STO
RA
GE
HARD MASTER JAWS FOR 2, 3 & 4-JAW SELF-CENTERING SCROLL CHUCKSAmerican Standard Tongue & Groove Jaws
BISON™ REPLACEMENT PARTS
2-Jaw Chucks 3-Jaw Chucks 4-Jaw ChucksChuck Dia Part Number Price Part Number Price Part Number Price
*Indirect mount. All indirect mount chucks come with fully machined backplate.
3-JAW OIL COUNTRY CHUCKSSelf-Centering, Extra Heavy Duty
• Two-piece master jaw style chuck• Forged steel body• Large thru-hole• Direct and indirect mounting• Includes two-piece reversible hard jaws, wrench, mounting bolts and eye bolt
3 JAW OIL COUNTRY CHUCKSSelf-Centering Extra Heavy DutyDirect “A” Type Mount
• Forged Steel Body• Extra heavy duty American Standard Hard Top and Master Jaws• Gripping surfaces serrated for more holding power• Large Thru-hole• Direct “A” type Mount