[ 1/1,) :111' J I 240 and 250 Skid Steers SPECIFICATIONS 240 Engine: Make.. JohnDeere Model.. 3029D Type.. Diesel Cylinders. 3 Bore. 106mm(4.17-in.) Stroke. 110mm(4.33-in.) Displacement. 2.9L.(179cu-in.) Gross horsepower (SAE J1940). 39.5 kW (53 hp) @ 2400 rpm Net horsepower (SAE J1940). 38.0 kW (51 hp) @ 2400 rpm Torque rise. 19% RPM,rated 2400 RPM,slow(noload). 1175 RPM,fast(noload). 2575 Lubrication. Full pressure Crankcase capacity (with filter). 7.4 L (7.8 qt.) Cooling system. """"""""'" Liquid Coolant capacity radiator and block..... 10.6 L (2.8 gal.) Air filter type. """"""""""" Dry paper with primary & secondary elements Electrical: Type of starter. 2.5kWValeo Battery voltage. 12V Battery reserve capacity at 27°C (80° F). 180 minutes Battery cold cranking amps at -18°C (O°F). 750 Charging system. """"""""" 55 amp alternator Fuel System: Fuel. Diesel#2 Capacity. 57L(15gal.) Fueldelivery Rotary injection Fuel shut-off....................... Fuel shutoff solenoid in injection pump Powertrain: Type. Variable displacement Brakes. Wetdisksonhydrostaticmotor shaft-SAHR (spring-applied, hydraulic-release) Steering: Type. Hydrostatic Hydraulics: Main system relief pressure........... 21374 kPa (3100 psi) Hydraulic pump (standard flow)........ 55.3 Ipm (14.6 gpm) Hydraulic pump (high flow). """"" 96.1 Ipm (25.4 gpm) Hydraulic valve. """"""""'" 3 spool open center Hydraulic system capacity. 23 L (6 gal.) Built-inboomlocks Yes Self-leveling. Optional-hydraulic Performance: SAE rated operating capacity. 681 kg (1500 lb.) SAE rated operating capacity with optional counterweight kit. 907 kg (2000 lb.) SAE breakout force (bucket). """'" 2495 kg (5500 lb.) SAE breakout force (boom)........... 1406 kg (3100 lb.) Groundspeed. 10.8km/h(6.7mph) Axletorque 6031 N-m(4448Ib-ft) SAE operating weight. 2796 kg (6165 lb.) SAEtippingload. 1542kg(3400Ib.) Nov. 01 Litho in U.S.A. ] 240/250-29 250 John Deere 3029T Diesel 3 106 mm (4.17-in.) 110 mm (4.33-in.) 2.9 L (179 cu-in.) 48 kW (64.4 hp) @ 2400 rpm 45.5 kW (61 hp) @ 2400 rpm 30% 2400 1175 2525 Full pressure 7.4 L (7.8 qt.) Liquid 10.6 L (2.8 gal.) Dry paper with primary & secondary elements 2.5 kW Valeo 12 V 180 minutes 750 55 amp alternator Diesel #2 57 L (15 gal.) Rotary injection Fuel shutoff solenoid in injection pump Variable displacement Wet disks on hydrostatic motor shaft-SAHR (spring-applied, hydraulic-release) Hydrostatic 21374 kPa (3100 psi) 66.6 Ipm (17.6 gpm) 113.9 Ipm (30.1 gpm) 3 spool open center 23 L (6 gal.) Yes Optional - hydraulic 794 kg (1750 lb.) 953 kg (2100 lb. 2495 kg (5500 lb.) 1406 kg (3100 lb.) 10.9 km/h (6.8 mph) 6406 N-m (4725 Ib-ft) 2835 kg (6250 lb.) 1633 kg (3600 lb.) e e e t s d 4J e ;t e y e It \) e S e n 9