Insight Lighting www.insightlighting.com December 4, 2017 1 of 3 ILLUSIONS IL6LED LIGHT PIPE SYSTEM WET LOCATION - NATATORIUM APPLICATIONS INTEGRAL POWER SUPPLY 250W - WHITE LIGHT SHAPING THE EXPERIENCE OF LIGHT® SPECIFICATIONS LIGHT SOURCE 250W 27K, 30K, 35K, 40K OPTICS 90° 180° CRI 80 LUMEN MAINTENANCE 75,000 hrs L70 75,000 hrs L70 ELECTRICAL AC LINE VOLTAGE 120, 277, 347 VAC. POWER SUPPLY INTEGRAL TO THE LUMINAIRE CONTROL 0 - 10VDC, 10V PWM signal and resistance 0-10V Simple dimming is standard. Insight recommends that the dimming system (by others) and driver compatability be pre-qualified prior to specification and/or purchase. Insight cannot be held responsible for insuring dimming component. Please contact factory for the latest compatibility information. PHYSICAL Illuminator: The illuminator is constructed of aluminum with single piece aluminum end plates and stainless steel hardware. Standard painted finish is corrosion resistant. The painted finish is designed to withstand pool and natatorium environments. All painted surfaces are prepared with a multi-stage phosphate wash/prime and coated with a textured dry powder polyester finish to a 3 mil thickness. Standard finishes are textured. Light Pipe: The translucent liteguide modules are constructed of a durable polycarbonate and are lined with 3M TM Optical Lighting Film (OLF). Each liteguide module is available in 8’ sections. 3M TM Optical Lighting Film (OLF) Film: A patented film technology composed of microprisms designed to extract and propagate light, providing uniform illuminance along the entire length of the liteguide. Available in 90° and 180° Performance Film, 360° Radial Display Film. DIMENSIONS ILLUMINATOR: 11-1/2" Diameter, 13-1/8" Length LIGHT PIPE: 6" DIAMETER X 16' - 64' Length OPERATING TEMPERATURE 120-277V: -20° C to 50° C 347V: -20° C to 45° C CERTIFICATION ETL & cETL for wet locations. Designed for interiors natatorium applications. Not designed for use in exterior applications. WARRANTY 2 YEAR LIMITED
3
Embed
SPECIFICATIONS - Insight Lighting LED...painted surfaces are prepared with a multi-stage phosphate wash/prime and coated with a textured dry powder polyester ... ILLUSIONS IL6LED LIGHT
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Insight Lighting www.insightlighting.com
December 4, 2017 1 of 3
ILLUSIONS IL6LEDLIGHT PIPE SYSTEM
WET LOCATION - NATATORIUM APPLICATIONSINTEGRAL POWER SUPPLY
250W - WHITE LIGHT
SHAPING THE EXPERIENCE OF LIGHT®
SPECIF ICAT IONSLIGHT SOURCE 250W
27K, 30K, 35K, 40K
OPTICS
90° 180°
CRI 80
LUMEN MAINTENANCE 75,000 hrs L70 75,000 hrs L70
ELECTRICAL AC LINE VOLTAGE 120, 277, 347 VAC.
POWER SUPPLY INTEGRAL TO THE LUMINAIRE
CONTROL 0 - 10VDC, 10V PWM signal and resistance
0-10V Simple dimming is standard.Insight recommends that the dimming system (by others) and driver compatability be pre-qualified prior to specification and/or purchase.
Insight cannot be held responsible for insuring dimming component. Please contact factory for the latest compatibility information.
PHYSICAL Illuminator: The illuminator is constructed of aluminum with single piece aluminum end plates and stainless steel hardware.
Standard painted finish is corrosion resistant. The painted finish is designed to withstand pool and natatorium environments. All painted surfaces are prepared with a multi-stage phosphate wash/prime and coated with a textured dry powder polyester finish to a 3 mil thickness. Standard finishes are textured.
Light Pipe: The translucent liteguide modules are constructed of a durable polycarbonate and are lined with 3MTM
Optical Lighting Film (OLF). Each liteguide module is available in 8’ sections.
3MTM Optical Lighting Film (OLF) Film: A patented film technology composed of microprisms designed to extract and propagate light, providing uniform illuminance along the entire length of the liteguide. Available in 90° and 180° Performance Film, 360° Radial Display Film.