Mueller Co. International Division • 6125 Preservation Dr., Suite 200 • Chattanooga, TN 37416 USA p +1.423.490.9555 • f +1.423.531.0033 • [email protected] • mueller-international.com Reliable Connections TM Triton XR-70 ® Butterfly Valve PRODUCT FEATURES ACCESSORIES/OPTIONS Form 13030 – Rev 09/16 • Conforms to AWWA C504. • 24” – 144”/DN600 – DN3600. • Body Style: Standard Flange Ends. • Pressure Class: AWWA Class 75B (54” – 144”/DN1350 – DN3600) and 150B. • Replaceable rubber E-Lok seat-in design. • Optional external injection port. • Seat material also available in EPDM. • Flow-through disc on 30”/DN750 and larger. • Non-metallic bearings. • V-type Shaft packing. • Through disc pinning. • Anti-Cavitation Device option to draw in air to reduce cavitation effects. • Bonnets • Floorstands • Shaft Locking Devices • External Epoxy Injection Port • Expansion Joints • Rubber Lining Consult factory for accessory details and optional body styles. INTERNATIONAL DATA SHEET SPECIFICATIONS FOR MATERIAL OF CONSTRUCTION Part Name Material Body Cast Iron (24” – 48”/DN600 – DN1200) – ASTM A126, Class B; Ductile Iron (54”/DN1350 & Larger) – ASTM A536, Grade 65-45-12 Disc Ductile Iron – ASTM A536, Grade 65-45-12 Disc Edge Stainless Steel – ASTM A-240 Type 316 Shaft 304 Stainless Steel — ASTM A276 Type 304 Bearing TLFB — Teflon lined, Fiberglass backed Triton XR-70 Floorstand Assembly Triton XR-70 Floorstand with Extended Bon- net
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Mueller Co. International Division • 6125 Preservation Dr., Suite 200 • Chattanooga, TN 37416 USA p +1.423.490.9555 • f +1.423.531.0033 • [email protected] • mueller-international.com
Reliable ConnectionsTM
Triton XR-70® Butterfly Valve
PRODUCT FEATURES ACCESSORIES/OPTIONS
Form 13030 – Rev 09/16
• Conforms to AWWA C504.
• 24” – 144”/DN600 – DN3600.
• Body Style: Standard Flange Ends.
• Pressure Class: AWWA Class 75B (54” – 144”/DN1350 – DN3600) and 150B.
• Replaceable rubber E-Lok seat-in design.
• Optional external injection port.
• Seat material also available in EPDM.
• Flow-through disc on 30”/DN750 and larger.
• Non-metallic bearings.
• V-type Shaft packing.
• Through disc pinning.
• Anti-Cavitation Device option to draw in air to reduce cavitation effects.
• Bonnets
• Floorstands
• Shaft Locking Devices
• External Epoxy Injection Port
• Expansion Joints
• Rubber Lining
Consult factory for accessory details andoptional body styles.
I N T E R N AT I O N A L D ATA S H E E T
SPECIFICATIONS FOR MATERIAL OF CONSTRUCTION
Part Name Material
Body Cast Iron (24” – 48”/DN600 – DN1200) – ASTM A126, Class B;Ductile Iron (54”/DN1350 & Larger) – ASTM A536, Grade 65-45-12
Disc Ductile Iron – ASTM A536, Grade 65-45-12Disc Edge Stainless Steel – ASTM A-240 Type 316Shaft 304 Stainless Steel — ASTM A276 Type 304Bearing TLFB — Teflon lined, Fiberglass backed
Mueller Co. International Division • 6125 Preservation Dr., Suite 200 • Chattanooga, TN 37416 USA p +1.423.490.9555 • f +1.423.531.0033 • [email protected] • mueller-international.com
Reliable ConnectionsTM
Triton XR-70® Butterfly ValveNOTES
• Size = Nominal valve size.
• For bolts smaller than 1 3/4” (44mm) in diameter, bolt holes will
be 1/8” (3mm) larger than diameter of bolts. For bolts 1 3/4”
(44mm) in diameter and larger, bolt holes will be 1/4” (6mm)
larger than diameter of bolts. Dimensions and drilling of end
flanges conform to ANSI B16.1 Standard for cast iron flanges.
• Allow 31/2” (89mm) for thrust bearing removal.
• A, B = Apply to AWWA Classes 75A, 75B.
• AA, BB = Apply to AWWA Class 150B.
• F = Number and size of bolts. Class 125. Holes in trunnion
area are tapped (see Note: TAPPED HOLES).
• The Triton XR-70 butterfly valve can be equipped with a wide range of cylinder actuators and electric motor actuators to meet your special operating requirements. Please consult our factory for additional information.
E
D
A
B
G = BOLT CIRCLE
NOMINAL VALVE SIZE
C = FLANGE OD
Note: TAPPED HOLES: “F” SIZE UNC-2B X “E” DEEP24" VALVE 4 HOLES 2 TOP & 2 BOTTOM30" & UP 8 HOLES 4 TOP & 4 BOTTOM
EACH FLANGE
Note: TAPPED HOLES: “F” SIZE UNC-2B X “E” DEEP 24” (600mm) VALVE 4 HOLES – 2 TOP & 2 BOTTOM, 30” (750mm) & UP VALVE 8 HOLES – 4 TOP & 4 BOTTOM EACH FLANGE.