New Holland 3600-2 Type No. of Cylinder 3 Rated RPM 2500 MAX. Torque 1500 Air Cleaner TRANSMISSION Clutch (standard) Clutch (Optional) Transmission Standard Transmission Optional Forward Reverse Optional Drive BRAKES HYDRAULICS Standard Lift Capacity Optional Lift Capacity 3 point linkage Optional Hydraulic controls STEERING Standard Optional PTO Standard 540 RPM Optional TYRES Standard Front Rear Optional Front Rear FUEL TANK CAPACITY ELECTRICAL SYSTEM PLATFORM Optional Engine HP 50 Cat 8000 Series Wet type (Oil Bath) with Pre cleaner Double 8 Forward + 2 Reverse, constant mesh 12+3 Creeper; 12+3 UG 3.08-30.88 4.33-15.59 Oil immersed multi disc brakes 1500 kgf Category I & II, Automatic depth & draft control Remote valve Lift-O-Matic with height limiter, Sensitivity Control, Drop rate control Power GSPTO 6.0 x 16 14.9 x 28 7.5 x 16 16.9 x 28 60 litres 88 Ah, 12 Volt Battery; 23 Amp Splash Proof Alternator Total Weight 2055 Kg Wheel Base 2035 mm Ground Clearance 440 mm Turning Radius with Brakes 3190 mm Speed (KMPH) for standard DIMENSIONS AND WEIGHT Engine Specification Table: 3600-2TX