This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Engine MX-11, multi torque 6 cylinder diesel engine, 10.8 litres.Output 330 kW (449 hp) at 1600 rpm. Maximum torque 2300 Nm at900-1125 rpm for gearbox ratios up to and including 1.00; maximumtorque 2200 Nm at 900-1400 rpm for gearbox ratios over 1.00.;Exhaust emission Euro 6; Engine idle shutdown, 5 minutes; TraXongearbox, 12 speeds; Gearbox ratio 16.69-1.00; Rear axle ratio 2.38.
DRIVELINE
Spring brake cylinders onthe first front axle
04901
ZF Intarder02715
No MX Engine Brake09920
Optional
Brake Performance Monitoring; MX Engine Brake; Ventilated discbrakes front and rear. Dual circuit air system with electronic control(EBS). Twin cylinder air compressor with heated dryer and economymode..
BRAKE SYSTEM
Rear light unit with LEDs03323
Spare wheel carrier right-hand side
07071
Side member height 310mm
02601
Optional
Wheelbase 4.90 m / rear overhang 2.35 m; Side member height 260mm; Standard component location; exhaust pipe horizontal, low;Aluminium fuel tank 430 l, height 620 mm; Spray suppression; Frontunderrun protection (FUP); AdBlue tank 75 litres, left side chassis.
CHASSIS
016F0709A
AA
A -
201733p
- 1
7-0
5-2
017
2
Trailer cable EBS04659
Trailer coupling D=2007034
Trailer coupling D=13.707033
Optional
D-value cross member D=13.7; Pneumatic trailer connection C-type;Electric connection 24 V / 2x7 pins.
DRAWBAR AND TRAILER EQUIPMENT
Application connector fortail lift control
02597Application connector onthe chassis
06692
Optional
Application connector on the cab front.
BODIES AND PREPARATIONS FOR BODYING
Alternator 120 A06460
Optional
Alternator 80 A, batteries 2x 230 Ah..
ELECTRICAL POWER SUPPLY
Driveline related maxGCM 60000 kg class 3
00818
Driveline related maxGCM 56000 kg class 2
00939
Driveline related maxGCM 44000 kg class 2
03673
Optional
Chassis weight related technical GVM max 20500 kg; Drivelinerelated max GCM 50000 kg class 3.
GVM AND GCM
Cyclonic air intake high03648
Air intake high03647
Silent mode, noise level<72 dB(A)
08400
Optional
Air intake front.
APPLICATION CONDITIONS
Service interval extended08311
Optional
Standard Warranty takes care of 1 year complete vehicle, 2nd yeardriveline and 1st year breakdown.; ITS service.
Depending on the vehicle configuration a specific option may not be possible. The availability and specification of this vehicle may differ per country. For further information please contact the DAF organisation. Pictures and technical illustrations are notbinding in detail and can differ from the standard specification. Subject to modification without prior notice.
TB is overall width at rear. (At lower cab step 255).13)Laden height at centre of front axle(s).12)Unladen height at centre of front axle(s).11)Laden height at centre of driven axle(s).10)Unladen height at centre of driven axle(s).9)
Calculate customer specific body length with TOPEC. Body lengths shown based on evenly distributed load at max axle load.
8)Cab height is measured from frame member to closed cabin roof hatch.7)
CB is based on standard air intake and/or exhaust.6)
Other AE dimensions may be available for shown WB. Modify rear overhang to the calculated body length.
5)
Chassis and cab weight calculated with: Standard specification items only with 430 litres of fuel, 75 litres of AdBlue and driver of 90 kg, tolerance ± 3%. Changing of the specification can have major impact on vehicle weight, e.g. with MX-13 engine add 210 kg.
4)Axle load with standard tyre size.3)GCM in conformity with registration documents.2)GVM in conformity with registration documents.1)