www.colorbeamlighting.com Tél: 844-301-CBNA (2262) 450 Montée de Liesse Montréal, QC H4T 1N8 Email: [email protected]SPECIFICATION TAPE-60-RGB 4.32W/FT TAPE-60-RGB TAPE-60-RGB-IP68 LED Quantity: 60 LED/M Color /CCT: RGB Bin/Step: 1 bin only, 4 step binning Chip: EPISTAR CRI: N/A Luminous flux: 1200Lm/M Max Power: 14.4W/M PCB wide: 10mm (IP 68 - WP 14mm) Voltage: DC 24V Current: 0.6A Cut Length: 50mm / 2’’ (3 LED) for 12 VDC 100mm / 4’’ (6 LED) for 24 VDC PCB Specs: 10mm/5oz/WHT Connection: 2*20AWG / RED’+’/ BLK’- IP Rating IP20/IP68 Installation: 300LSE 3M tape Max Run Length: 5 meters (16.4FT/Roll) Life Span: 50,000 hrs Warranty: 5 years Dimmable: Yes Beam Angle: 120° Certificate: CE, RoHS, UL Packaging: 16.4 FT spool IP20= 120g/roll - IP68= 320g/roll DESCRIPTION • Double sided 3m tape backing • Low power consumption • Low heat emission • Available in IP20 or IP68 • Easy to install TYPICAL APPLICATIONS √ Accent lighting √ Decorative lighting √ Architectural lighting Colorbeam Lighting Inc. reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication. SPECIFICATION SHEET TAPE-60-RGB
3
Embed
SPECIFICATION SHEET TAPE-60-RGB - Colorbeam …...SPECIFICATION SHEET TAPE-60-RGB Colorbeam Lighting Inc. reserves the right to make changes in specifications and/or to discontinue
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Colorbeam Lighting Inc. reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication.
Colorbeam Lighting Inc. reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication.
SPECIFICATION SHEET
TAPE-60-RGB
WARNINGS & SAFETY INSTRUCTIONS
Always turn off main power prior installation or modifications to prevent electrical shock. Damaged wires can cause electrical shock hazards. Keep any control or driver devices in dry and well ventilated locations. Keep away any control or driver devices from any heat source, corrosive, flammable or explosive area. Installation and wiring by qualified party. System is intended for installation in accordance with local electrical code. Do not open, modify or try to repair any device personally.
OPERATION DETERMINATIONS
If drivers have been exposed to drastic temperature fluctua-tion temperature, do not switch on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
ELECTRICAL & WIRING
Any electrical equipement and wire should be used at 80% capacity. Any wire gauge should reflect load and distance as well as environment.
Colorbeam Lighting Inc. reserves the right to make changes in specifications and/or to discontinue any product at any time without notice or obligation and will not be liable for any consequences resulting from the use of this publication.