This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
N.Kassabian - Rev.62
1/10
08/JN/2016
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
Specification Sheet lumenfacade™
WHITE & STATIC COLORS
4"[102mm]
Minimumspacing
2 516
"
41
,37 38
"25 38
" , 49 38
"[645mm, 949mm , 1254mm]
[59mm]
3 12
"
[89mm]
"
[7mm]
2"[51mm]
13 38
"[340mm]
SIDE VIEW
FRONT VIEW
1ft fixture 2ft, 3ft and 4ft fixtures
TOP VIEW
Client Project name
Order# Type Qty
FEATURES AND BENEFITS
Physical :• Low copper content extruded aluminum housing• Available in 1’, 2’, 3‘ or 4’ sections• Electro-statically applied polyester powder coat finish• Machined aluminum end caps and silicone gaskets• Stainless steel hardware• Clear tempered glass• Asymmetric wallwash, 10° x 10°, 10° x 60°, 30° x 60° or 60° x 60° optics• IP66• IK07 rated (asymmetric wallwash lens is IK06 rated) • Meets 3G ANSI C136.31 Vibration standard for bridge applications• Corrosion-resistant coating for hostile environments**
Performance :• CRI values: 85+ (2700K), 80+ (3000K), 78+ (4000K)• Lumen maintenance 120,000 hrs [L70 @ 25°C]• Lumen measurements comply with LM - 79 - 08 standard• Resolution per foot or per fixture (configured with LumenID V3 software & DMX/RDM)• Operating temperatures: -25° C to 50° C [-13F to 122F]
Electrical :• Line voltage luminaire for 100 to 277V• Power and data in 1 cable (#16-5)• Up to 88 feet with a single120V power feed, HO version• 5W/ft version meets ASHRAE standards for linear lighting on building facades• 8.5W/ft Regular Output version• 15.25W/ft High Output version• Dimming options: 0-10 volt, DMX/RDM enabled, DALI, Lumentalk or Lutron® EcoSystem® Enabled
*Asymmetric wallwash lens is IK06 rated.** Use only when exposed to salt spray and harsh chemicals. This option is not required for normal outdoor exposure!
*Estimated.Consult lumenpulse website for the latest ies files.
DeliveredOutput [lm]
10ºx10º
10ºx60º
30ºx60º*
60ºx60º*
4ft HO 4000KIntensity[peak cd]
- -
3,692 19,654
3,584 4,750
3,676 3,137
WW 3,592 5,159
CERTIFICADO No.05884,05885
RETILAP
IK07*
N.Kassabian - Rev.62
2/10
08/JN/2016
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
Specification Sheet lumenfacade™
WHITE & STATIC COLORS
ACCESSORIESOrder separately
Leader Cable :LOGLCD___ Leader Cable for Lumenfacade.
Please add desired cable length : 10’, 25’ or 50’ [3m, 7.6m or 15.2m] standard lengthsSealing endcap is mandatory for any unused connector.(1) included with every leader cable
LOGLCD___-ETE Leader Cable for Lumenfacade, ETE option.Please add desired cable length : 10’, 25’ or 50’ [3m, 7.6m or 15.2m] standard lengthsSealing endcap is mandatory for any unused connector.(1) included with every leader cable
Jumper Cable :LOGJCD___ Jumper Cable for Lumenfacade.
Please add desired cable length : 2’ or 4’ [0.6m, 1.2m] standard lengths
LOGJCD___-ETE Jumper Cable for Lumenfacade, ETE option.Please add desired cable length : 2’ or 4’ [0.6m, 1.2m] standard lengths
Radial Louver : Not suitable for asymmetric wallwash optic
LOGRD___-___ Radial louver for Lumenfacade.Louver blade depth: 7/16” [11mm]; louver blade spacing: 1” [25mm]1. Please specify desired nominal length: 1’, 2’, 3’ or 4’.2. Please specify finish as BK - Black Sandtex, SI - Silver Sandtex or WH - Smooth white (Custom color available on request, please specify as CC together with RAL color : _________)
Control Systems:LTO2 Lumentouch is a wall mount DMX 512 controller keypad.
LCU Lumencue is a USB / mini SD DMX 512 controller.
LID LumenID is a diagnostic and addressing DMX 512 controller.It must be specifi ed on all DMX applications.Refer to LID specifi cation sheet for details.
LTN Lumentone is a simple pre-programmed DMX 512 controllerwith a push button rotary dial and live feedback.
Control Boxes:CBX DMX/RDM control box.
Up to six power and data outputs to fi xtures or fi xture runs.Ethernet enabled option.Refer to CBX specifi cation sheet for details.
N.Kassabian - Rev.62
6/10
08/JN/2016
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
Specification Sheet lumenfacade™
WHITE & STATIC COLORS
RESOLUTION DETAILSApplicable for DMX/RDM control option only.Fixture resolution can be configured on-site within the LumenID V3 software. A DMX/RDM enabled CBX is required.
Resolution per fixture: each fixture is addressed independently
Resolution per foot: each foot is addressed independently
DMX ADDRESSES:
DMX ADDRESSES:
LOG 48 inches LOG 48 inches
1 2
LOG 48 inchesTOP VIEW
TOP VIEW
LOG 48 inches
1 2 3 4 5 6 7 8
N.Kassabian - Rev.62
7/10
08/JN/2016
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
Specification Sheet lumenfacade™
WHITE & STATIC COLORS
TYPICAL WIRING DIAGRAMS - continued
Jumper cable#16-5
JBOX
Leader cable#16-5
Ground greenNeutral white
Line black
Data-- orangeData+ red
Junction box(by others)
FromLutron EcoSystem Controller
100-277V To fixtures
Sealingend cap
Jumper cable#16-5
JBOX
Leader cable#16-5
Ground greenNeutral white
Line black
Data-- orangeData+ red
Junction box(by others)
FromDALI Controller
100-277V To fixtures
Sealingend cap
Dimming Version (EcoSystem®)*
Dimming Version (DALI)
1% minimum dimming value
1% minimum dimming value
TypicalDALI Controller
Grafik Eye® shown
LUTRON
1
2
3
4
Off
Preset
Close
Open
Maximum run length by 15A circuit - Lumenfacade™ HO
Cable length/Voltage 120V 240V 277V
88ft 100ft 112ft
68ft 76ft 84ft
10ft leader cable
50ft leader cable
Maximum run length by 15A circuit - Lumenfacade™ RO
148ft 168ft 184ft
120ft 132ft 148ft
10ft leader cable
50ft leader cable
Maximum run length by 15A circuit ASHRAE Code Compliant - Lumenfacade™ 5W/ft
180ft 250ft 300ft
168ft 230ft 280ft
10ft leader cable
50ft leader cable
*Each Lutron® EcoSystem® enabled fixture has its own address; for the example shown above, there are a total of 3 EcoSystem® addresses.
Notes: 1 Maximum run length calculations are typically based on 4ft fixtures and up to 64 DALI or EcoSystem enabled fixtures per run.2 Consult factory for specific applications.3 Each fixture requires 1 DALI or Lutron® EcoSystem® address.
AmericanColor Code
CEColor Code
Black Brown
Red/Purple BlackOrange Grey
White Blue
USE
Live 100-277V
0-10V / Data +
Green Yellow/Green Ground
0-10V / Data -
Neutral
N.Kassabian - Rev.62
9/10
08/JN/2016
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
Specification Sheet lumenfacade™
WHITE & STATIC COLORS
TYPICAL WIRING DIAGRAMS - continued
Daisy Chain Layout (DMX/RDM)
Star Layout (DMX/RDM)
Jumper cableend-to-end #16-5
Leader cable #16-5
100-277VData input
CBX-ST
Jumper cable #16-5
Jumper cableend-to-end #16-5
Leader cable #16-5 100-277VDatainput
Jumper cable #16-5
Jumper cable #16-5
Leader cable #16-5
Sealingend cap
Sealingend cap
100-277V
CBX-DS
CBX-DS
100-240V
100-240V
Datainput
Datainput
Maximum run length by 15A circuit - Lumenfacade™ HO DMX/RDM
Cable length/Voltage 120V 240V 277V
88ft 100ft 112ft
68ft 76ft 84ft
10ft leader cable
50ft leader cable
Maximum run length by 15A circuit - Lumenfacade™ RO DMX/RDM
128ft 128ft 128ft
120ft 128ft 128ft
10ft leader cable
50ft leader cable
Maximum run length by 15A circuit ASHRAE Code Compliant - Lumenfacade™ 5W/ft DMX/RDM
128ft 128ft 128ft
128ft 128ft 128ft
10ft leader cable
50ft leader cable
Notes: 1 Maximum run length calculations are typically based on 4ft fixtures and up to 32 DMX/RDM enabled fixtures per DMX/RDM run.2 Consult factory for specific applications.3 Each fixture requires 1 DMX address.
1% minimum dimming value
1% minimum dimming value
Lumentouch 2.0
Lumentouch 2.0
AmericanColor Code
CEColor Code
Black Brown
Red/Purple BlackOrange Grey
White Blue
USE
Live 100-277V
0-10V / Data +
Green Yellow/Green Ground
0-10V / Data -
Neutral
N.Kassabian - Rev.62
10/10
08/JN/2016
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
WAM2 - Adjustable Wall Mounting 2”WAM6 - Adjustable Extended Arm Mounting 6”WAM12 - Adjustable Extended Arm Mounting 12”WAM18 - Adjustable Extended Arm Mounting 18”
7
Finish:BK - Black SandtexSI - Silver SandtexWH - Smooth whiteCC - Custom color and finish (please specify RAL color)4
8
Control:NO - No DimmingLT - Lumentalk Dimming5
DIM - 0-10V Dimming option6
DMX/RDM - DMX/RDM enabled7
DALI - DALI Dimming option8
ES - Lutron® EcoSystem® Enabled Dimming9
9
Option:ETE - End - to - end configuration, no jumper cable neededCRC - Corrosion-resistant coating for hostile environments3GV - 3G ANSI C136.31 Vibration Rating10
LOG 1 2 3 4 5 6 7 8 9
HOW TO ORDER
Notes:1 Right feeding side is standard unless otherwise specified. 2 For best results use with HO fixtures at a 6-inch (15cm) setback from surface. Contact factory for application support. 3 Suitable touse when 3GV option is specified. 4 North American RAL colors specified with RAL number only are provided with a smooth/high-gloss finish. Please consult factory for other RAL textures andglosses, or to match alternate color charts. Final color matching results may vary. 5 1% minimum dimming value. Available for 2’ RO, 3’ and 4’ lengths only. 6 10% minimum dimming value.7 1% minimum dimming value. Fixtures set to by fixture resolution. 1 DMX address per fixture. 8 1% minimum dimming value. 1 DALI address per fixture. 9 1% minimum dimming value. Availablefor 2’ RO, 3’ and 4’ lengths only. 1 EcoSystem® address per fixture. 10 Available with UMP and UMAS mounting options only.