Specification Sheet / In-grade / L09 All technical information in this document is subject to change. Copyright © MP Lighting. www.mplighting.com t 1.877.708.1184 f 604.708.1185 L09 Application Interior directional in-grade light for lighting walls, columns, architectural features or landscape features. Applicable for mounting into floors, walls, ceilings or other surfaces where a non-obtrusive luminaire is required. Suitable for walk-over and drive-over applications. Recommended Projects - Commercial, Institutional, Retail, Clinic, Hospitality, Religious, Educational, Architecture IP Rating 40 Mounting Comes with steel flange which mounts to pre-installed standard 4” (102mm) octagonal box, 1-1/2” (38mm) deep minimum and 1/4” (6mm) setback from face of drywall. Can be wall or ceiling mounted. Electrical Powered by remote dimmable/non-dimmable driver( sold separately ). *See website for recommended drivers *Remote emergency driver / inverter options available. Consult factory Power Consumption 1.5 Watt (at 350 mA, 1.0 Watt) 3.0 Watt (at 700 mA, 2.5 Watt) Light Output 1.0 Watt, 0.5~1lm 2.5 Watt, 0.8~1.6lm *For photometric data, see page 02 Warranty 5 years limited warranty Estimated useful life of LED is 50,000 hours. Material Solid anodized aluminum or stainless steel (316). RoHS compliant. Weight 1.8lbs (0.816kg), base extra. Approval 11-2017 Code Wattage Color Aperture Input Voltage Finish L09 - - 1 = 1W 2 = 2.5W S = single D = double D = DC A = 12V AC (AC available for W27S, W30S and W35S only) MA = matte clear anodized BA = black anodized BZ = bronze anodized S6 = stainless steel 316 W22S = 2200K, 80+CRI W27S = 2700K, 80+CRI W30S = 3000K, 80+CRI W35S = 3500K, 80+CRI W41S = 4100K, 80+CRI W20H = 2000K, 90+CRI W27H = 2700K, 90+CRI W30H = 3000K, 90+CRI W35H = 3500K, 90+CRI Type: Project: Modified: Quantity: Notes: Order Guide Example: L09-2-W30-S-D-A-MA DISCLAIMER - When using a control system, consult dimming system manufacturer with minimum load before installing 12V AC transformer. Malfunction and damage to product due to improper dimming system installation or misuse will not be covered under warranty. Only DC Drivers are recommended for dimming systems. Consult MP Lighting for recommended drivers. *MP Lighting reserves the right, at its sole discretion, at any time and without notice, to make design changes to any of our products. Double aperture Single aperture