— SPECIFICATION SHEET ABB Welcome™ Lift (elevator) adaptor and control relay module Key features • Turn the 2-bus line signal into RS485 signal • Can be directly connected to PC for configuration using ABB Welcome configuration software • Two operating lights: POWER and RUN STATUS The lift adaptor and control relay modules are used together to provide elevator control. Residents can control guest floor access by activating the elevator upon arrival home. When installed and commissioned properly, up to 256 floors can be supported. Operating temperature -13 F to 131 F Ingress protection IP20 Single-wire clamps 2 x 22AWG – 2 x 16AWG Fine-wire clamps 2 x 22AWG – 2 x 16AW Bus voltage 20-30 VDC (Provided by M2301 configured as a local power supply) Product dimensions 3.54" x 2.83" x 2.56" — Specifications — 01 M2306 lift adaptor
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
—S PECI FI C ATI O N S H EE T
ABB Welcome™Lift (elevator) adaptor and control relay module
Key features• Turn the 2-bus line signal into RS485 signal• Can be directly connected to PC for configuration
using ABB Welcome configuration software• Two operating lights: POWER and RUN STATUS
The lift adaptor and control relay modules are used together to provide elevator control. Residents can control guest floor access by activating the elevator upon arrival home. When installed and commissioned properly, up to 256 floors can be supported.
Operating temperature -13 F to 131 F
Ingress protection IP20
Single-wire clamps 2 x 22AWG – 2 x 16AWG
Fine-wire clamps 2 x 22AWG – 2 x 16AW
Bus voltage 20-30 VDC (Provided by M2301 configured as a local power supply)
Product dimensions 3.54" x 2.83" x 2.56"
—Specifications
—01 M2306 lift adaptor
Key features• Turn the RS485 signal into relay switch• Each module contains 16 relays• The relay can connect elevator button panel directly• Can set a relay for a floor number
Operating temperature -13 F to 131 F
Ingress protection IP20
Single-wire clamps 2 x 22AWG – 2 x 16AWG
Fine-wire clamps 2 x 22AWG – 2 x 16AWG
Bus voltage 20-30 VDC (Provided by M2301 configured as a local power supply)
Product dimensions 8.50" x 4.33" x 1.77"
—Specifications
—02 M2307 lift control relay module
1SX
U4
60
028
L0
201
Rev
.B M
arch
20
21
—We reserve the right to make technical changes or modify the contents of this document without prior notice. With regard to purchase orders, the agreed particulars shall prevail. ABB Inc. does not accept any responsibility whatsoever for potential errors or possible lack of information in this document.