This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Specification of DERRICK LAY BARGE
MARIDIVE CONSTRUCTOR
Valentine Maritime (Gulf) LLC
Rev. : 13 Date : 25.08.16 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE OR LIABILITY
P:\Maridive Constructor\Specification\MC - Specification Rev13.doc Page 1 of 11
Auxiliary Equipment : 2 Nos. x 10 MT Hydraulic Tugger
CRANE LIFTING CAPACITIES
(*) Height in mtr above Main Deck Level. (**) Deck Lift : General deck operation in harbor and offshore up to Significant Wave Height (max) = 0.6 m (***) Sea Lift : Loading or unloading other vessels Significant Wave Height (max) = 1.6 m
Notes : 1. Distance from c.l. of Crane to : -
a) Edge of STERN longitudinal direction : 4.50 mtr b) Edge of PORT direction : 5.50 mtr
2. Tie Down System : Blocks stored on Main Deck. 3. Crane is equipped with, load & radius indicators, Sailor RT 2048 VHF Radio and
CCTV monitoring system between crane operator cabin & crane engine room. 4. Crane is provided with Wind Speed and Direction Indicator. 5. Crane is provided with a CCTV system for monitoring the wire rope drums.
e) Internal Lineup Clamp • 2 Nos. × Pneumatic Lineup Clamps to suit pipe sizes. • 2 Nos. × Quincy 325 HP, 18 cfm, 10 Bar Compressors to operate
Internal Lineup Clamps.
f) Field Joint Coating System 2 Nos. × 18 Gal / min Capacity, Fixed Ratio 1:1 with Hydro-Cat, Pressure 1000 psi, Make : GRACO
g) Stinger 32-68 mtr long floating stinger
h) Davits
4 - 5 Nos. × 40 - 50 MT Capacity each (mobilized if required during Project stages)
i) Ramp
• Pipe Lay Ramp 5.4 mtr wide x 40 mtr long is located at STBD side of the Barge.
• At Ramp end ‘T’ bar sections welded to connect Stinger hitch / Stinger sections with the Barge.
14. MOORING SYSTEM
• 8 Point Mooring System • 8 Nos. self adjusting fair leads with 8 - 10 MT Delta Flipper Anchors. • 8 Anchor Lines with 1500 mtr long × 48 mm diameter wire rope on
each. • 8 Nos. PLIMSOLL Electro-hydraulic Single Drum Winches, with capacity
of 50 MT at 10 mtr / min each. • All Mooring Winches are controlled from the Barge Tower. • All anchor lines are fitted with sensing devices for measuring tension,
wire rope pay in/out & length. Winch Drums are monitored by CCTV system from the Tower.
15. SERVICE TANKS
• 6 Nos. Fresh Water Tanks with total capacity : 2,000 Cu.M. • 2 Nos. Potable Water Tanks : 500 Cu.M • 4 Nos. Fuel Tanks with total capacity : 685 Cu.M. • 15 Nos. Ballast Water Tanks with total capacity : 2,400 Cu.M
Rev. : 13 Date : 25.08.16 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE OR LIABILITY
P:\Maridive Constructor\Specification\MC - Specification Rev13.doc Page 5 of 11
16. ACCOMMODATION
The Barge is equipped with air conditioned quarters for 250 personnel with galley, recreation rooms, hospital and offices. The available cabins are as follows:-
• 2 Nos. × 760 kW CAT Generators powered by 3508 Engine (380V, 50 Hz). (Main Generators are paralleled and synchronized).
• 1 No. × 240 kW CAT Generator powered by 3406 Engine (380V, 50 Hz) as Emergency Generator. (Emergency Generator starts automatically within 45 seconds in case of Main Generators failure).
21. WATER MAKER
• 2 Nos. × 40 MT/ day Aqua-Tech Reverse Osmosis Unit.
22. OILY WATER SEPERATOR
• 1 × 2.5 m3/hr Oily Water Separator, Model - SKIT/S-DEB (15 PPM)
Rev. : 13 Date : 25.08.16 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE OR LIABILITY
P:\Maridive Constructor\Specification\MC - Specification Rev13.doc Page 6 of 11
23. SEWAGE TREATMENT PLANT
• 2 Nos. × 20.35 m3/day Sewage Treatment Plants, Model - WWT 8 BIOPUR 24. AIR COMPRESSORS
• 2 Nos. × 850 cfm Compressors @ 10 Bar, Ingersoll Rand Model : 9/ 235
• 1 No. × 602 cfm Electric Air Compressor @ 13 Bar, Atlas Copco Model : GA90VSD
25. MAIN WORKING DECK
The working area of deck is covered with double layer, crossed, heavy duty timber allowing deck loading in excess of 12 MT / M2 available. Clear Deck Area is 1,600 M2.
26. WORKSHOP
Barge is equipped with a workshop in the Main Deck level with following equipment.
• Lathe 1 No.
• Shaping Machine 1 No.
• Pedestal Drill 1 No.
• Welding Machine 1 No.
• Pipe Thread Machine 1 No.
27. STORES Barge is equipped with stores to keep equipment spares, welding
accessories, rigging gears, consumables, paints etc.
28. WELDING MACHINES
• VERMAAT Dual Torch Auto Weld System 6-8 Units
• Miller SRH 444 (400 Amps Electric) 9- 20 Units
• Miller Dimension 456 Inverters 8-10 Units
• Miller Big Blue 600 DX Diesel Engine driven multi-process Welding Generator 1 No.
Rev. : 13 Date : 25.08.16 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE OR LIABILITY
P:\Maridive Constructor\Specification\MC - Specification Rev13.doc Page 7 of 11
29. COMMUNICATION Provided communication equipment for Area A1+A2+A3
• VHF Radio, SAILOR RT 5022 VHF DSC 2 Units
• VHF Radio, SAILOR RT 2048 COMPACT VHF 5 Units
• WATCH RECEIVER, BUILT-IN VHF RT 2048 1 Unit
• SSB RADIO TELEPHONE, SAILOR HC 4500 B (MF / HF) 1 Unit
• MARINE RADAR, FURUNO 1932 & FURUNO 1935 2 Units
• GPS / CHART PLOTTER, FURUNO GP-3500 1 Unit
• GYROCOMPASS WITH REPEATER, ANSCHUTZ STD22 1 Unit
• PUBLIC ADDRESS SYSTEM WITH TALK BACK FACILITIES 1 Unit
• PHONE / INTERCOM SYSTEM, PHONTECH DISC 6123 1 Unit
• NAVTEX, JAPAN MARINE NT-900 1 Unit
• MAGNETIC COMPASS, SARCOM / C-PLATH NAVIPOL 1 Unit
• EPIRB, JORTON TRON 40S GMDSS DC. 1 Unit
• WALKIE-TALKIE WITH HEADSETS, ICOM-M90E 2 Units
• SHIP SECURITY ALERT SYSTEM, SAILOR TT-3000SSA 1 Unit
• ECO SOUNDER, FURUNO FE 700 1 Unit
• WIND SPEED & DIRECTION INDICATOR, YOUNG WIND TRACKER 06206 (Located in Tower with a repeater in barge office) 1 Unit
• WIND SPEED & Direction Indicator, THIES CLIMA (Tower) 1 Unit
• SART, JOTRON TRON 2 Units
• MOTOROLA WALKIE TALKIE (GP-340) 11 Units
• AERO VHF (JOTRON TR-710) 1 Unit
• HAND HELD (GMDSS W/T), SAMYUNG STV 160 3 Units
• HAND HELD ANEMOMETER (DEUTA-WERKE) 1 Unit
• HAND HELD AERO RADIO (AIR BAND TRANSCEIVER)-ICA6 1 Unit
• INMARSAT / MINI C (NO. 1), SAILOR THRANE & THRANE 403026 C 4TT0938C0F4D 1 Unit
Rev. : 13 Date : 25.08.16
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE OR LIABILITY P:\Maridive Constructor\Specification\MC - Specification Rev13.doc Page 8 of 11
• INMARSAT / MINI C (NO. 2), THRANE & THRANE
403026 C 4TT093F95847 1 Unit
• AIS, SAMYUNG SI-30 1 Unit
• Power Supply Main, V-380/220 V 50 HZ 800 Watts 1 Unit
• Reserve Battery, V-24 DC 1 Unit
• Helideck Pitch & Roll Monitoring System, Make : IPC-7220 1 Unit
30. BALLAST / BILGE PUMPS
Barge is equipped with Ballast and Bilge Pumps as detailed below:
Ballast Pump
• 2 Nos. × 130 m3/hr @ 61.3 mtr head Allweiler AG Ballast Pumps
Bilge Pump
• 1 No. × 20 m3/hr @ 20 mtr head AZCUE Main Bilge Pump
• 1 No. × 25 m3/hr @ 25 mtr head Allweiler Main Bilge Pump
• 1 No. x 12.5 m3/hr @ 18 mtr head Crompton Greaves Main Bilge Pump
• Ballast Pumps are used as Emergency Bilge Pump 31. FIRE FIGHTING EQUIPMENTS / FACILITIES
Fire Pumps
• 1 No. x 130 m3/hr @ 60 mtr head, Main Fire Fighting Pump
• 1 No. x 60 m3/hr @ 60 mtr head, Emergency Fire Fighting Pump
Fire Fighting System / Extinguishers
• CO2 System for Engine Room & Paint Store
• 1 Set Helideck Foam Fire Fighting System
• Fire Extinguishers : As per SOLAS / Class Requirement
32. HEAT AND SMOKE DETECTION
Fixed Fire detectors are installed in all Cabins, Corridors, Service area and Machinery Space. The control panel is installed at the Tower. Make : Minerva Marine, Model : T1016.
Rev. : 13 Date : 25.08.16 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE OR LIABILITY
P:\Maridive Constructor\Specification\MC - Specification Rev13.doc Page 9 of 11
33. H2S AND LEL GAS DETECTION
H2S and LEL gas detectors installed in main deck with audible & visual alarms in accommodation & Radio Room (Only installed when needed for a project).
34. LIFE SAVING APPLIANCES
• Life Rafts / Life Jackets As required by Flag / Class Society.
• Life Buoys & MOB As required by Flag / Class Society.
• Pyrotechnics As required by Flag / Class Society
• Fast Rescue Boat 1 × 6 men 30 HP Rescue Boat with Davit.
Rev. : 13 Date : 25.08.16 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE OR LIABILITY
P:\Maridive Constructor\Specification\MC - Specification Rev13.doc Page 10 of 11
Rev. : 13 Date : 25.08.16 SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE OR LIABILITY
P:\Maridive Constructor\Specification\MC - Specification Rev13.doc Page 11 of 11