SPECIFICATION - Khyber Pakhtunkhwa Police - Official …kppolice.gov.pk/tenders/images/Specification.pdfPage 3 of 27 BLUE JACKET Cloth (Navy blue) as per approved shade 65% Polyester

Page 1 of 27

Khyber Pakhtunkhwa Police

SPECIFICATION

Transport, Security, Office, Anti-Riot and Ordinance Store equipment

FINANCIAL YEAR 2013-14

Page 2 of 27

DMS SHOES

Upper materials

Quarter Cow full Grain/Split pigmented (Heircell plated) Black

Tongue Cow full Grain/Parachute (Water proof) + Foam + silk cloth Black

Counter Cow full Grain Black Vamp Cow full Grain Black Binding Play boy or equivalent Black

Lining materials Vamp Drill Grey Grey Inter vamp EVA Soft Black

Eyelet system Eyelet 12 per pair (six per boot) Black Hooks 20 pair per (Ten per boot) Black Laces (Nylon Round) Size (82-84 inches) Black

Threads Nylon 50/3, 50/6 Black Toe puff TP-8 Stiffener TP-8 Socks Split pigmented Black Insole Texon

Out sole Polyurethane or equivalent

PU (Polyurethane) or equivalent – Double Density Direct Injection Panama Sole Tread Pattern Design

Black

ANKLE BOOTS

Upper materials

Quarter Cow full Grain Black Tongue Cow full Grain + Foam Black Counter Cow full Grain Black Vamp Cow full Grain Black

Lining materials Vamp Textile Play Boy or equivalent Black Inter vamp EVA Soft Black

Eyelet system Eyelet 24 per pair (12 per boot) Black Laces (Nylon Round) Size (54-60) Black

Threads Nylon 50/3, 50/6 Black Toe puff TP-8 Black Stiffener TP-8 Black Socks Split Heircell Black Insole Texon Pre-Molded Texon

Out sole Polyurethane or equivalent

PU (Polyurethane) or equivalent – Double Density Direct Injection Panama Sole Tread Pattern Design

Black

Page 3 of 27

BLUE JACKET Cloth (Navy blue) as per approved shade 65% Polyester & 35% Cotton Blended Basic cloth for Jacket Sr # Test standard Specifications

a. Width (Incl Selvedge) 141 cm b. Wt/Sq mtr 300g + 10 g

c. Thread/25mm Warp 109 +2 Weft 54 + 1

d. Count of yarn Warp 85 Tex + 2 (16) Weft 49 Tex + 2 (12)

e. Shrinkage Warp 2.0% (max) Weft 2.0% (max)

f. Breaking Strength (10.2x16.8 cm BG) Warp 400 Kg + 10 Kg Weft 255 Kg + 5 Kg

g. Washing Test No.3 Change in shade GS No.4 or better Staining on Cotton GS No.4 or better

h. Perspiration Test: (Acid/Alkaline) Change in Shade GS No.4 or better Staining on Cotton GS No.4 or better

i. Rubbing Test Dry GS No.3/4 or better Wet GS No.3/4 or better

j. Nature of Dye Ground Vat/Disperse

k. Blending Polyester 65 % + 3 Cotton 35 % + 3

l. Water repellency Class –IV or better m. Weave 3/1 Twill

n. Shade Colour and pattern Navy Blue & Black (As per approved sample)

CLOTH LINING (for Inner Lining of Jacket)

a. Width 141 cm b. Wt/Sq mtr 130 g + 10 g

c. Thread 25 mm Warp 136 + 2 Weft 72 + 2

d. Count of Yarn Warp 15 Tex + 1 (40) Weft 15 Tex + (40)

e. Shrinkage Warp 1.5% max

Page 4 of 27

Weft 1.5% max

f. Breaking Strength (10.2 x 16.8 cm BG) Warp 140 kg + 10 kg Weft 60 kg + 5 kg

g. Washing Test No.3 Change in shade GS -4 or better Staining on cotton GS -4 or better

h. Perspiration Test (Acid/Alkaline) Change in shade GS-4 or better Staining on cotton GS-4 or better

j Nature of Dye Vat/Disperse k. Scouring Lose 1.0% max

l. Blending composition Cotton 50% + 3 Polyester 50% + 3

m. Shade Navy Blue & Black (As per approved sample)

n. Weave Plain

VELCRO TAPE 25 MM AND 38 MM (MALE/FEMALE)

TAPE TEXTILE COTTON (For neck band)

CUT ZIPPER NYLON COIL (YKK Brand or equivalent)

Small No.5 (for attachment of hood & Sleeve) Large No.8

CORD ELASTIC ROUND (For waist adjustment)

a. Circumference 3.5 mm b. Weight/Linear mtr 8.5 + 0.5 g

c. Material Braided Polyester Core Rubber

d. Construction Braided 17 + 1 each multifilament Core 30 + 1

e. Colour/ Shade Navy Blue & Black (As per approved sample) f. Nature of Dye Disperse

g. Washing Test No.3 Change in shade GS-4 or better Staining on Cotton GS-4 or better

a. Width 25 + 1 mm 38 + 1 mm b. Wt/Linear Mtr 16 + 1 g 24 + 1 g c. As per sample

a. Width 20 + 1 mm b. Wt/Linear mtr 6.30 + 0.5 g c. Material Cotton d. Staining on Cotton GS-4 or better c. As per sample

Page 5 of 27

BRAIDED CORD (for hood and jacket bottom adjustment)

a. Circumference 3.5 mm b. Weight/Linear mtr 4 + 0.5 g c. Material Polyester d. Construction of Braided Yarn 4 braided yarn e. Colour/Shade Navy Blue & Black (As per approved sample) f. Nature of dye Disperse g. Washing No.3

Change in shade GS-4 or better Staining on cotton Gs-4 or better

FUSING BUKRAM WHITE (For Lining of pocket Flap Shoulder Strap) a. Weight/Sq mtr 210 + 10 g

b. Shrinkage% age Warp Nil Weft Nil

c. Adhesion with cloth by Ironing Satisfactory d. Material Cotton

BUTTON SEWING (4 HOLE POL YESTER 19 MM NAVY BLUE) (USC: (1) 19 mm Commando for shoulder strap, pocket flap and back pocket (2) 12.7 mm Flat Edge for attachment of Liner

19 mm Commando 12.7 mm Flat Edge a. Material Polyester b. Shade Navy Blue & Black (As per approved sample) c. Size (Dia) 19 mm + 0.4 mm 12.7 mm + 0.4 mm d. Specific gravity 1.2 g/cc + 0.1 g/cc e. Cold Water Absorption 1.0% f. Hot Water Absorption 3.0% g. Hot Ironing Test The washed button when subjected to hot ironing (Not too hot to burn, the

attached fabric piece) should not melt or be deformed in any way.

h. Thermal Shock Test The button when transferred from boiling water to cold water shall not show any sign of distortion.

j Dye fastness to light Class-V

k. Washing Test No.3 Change in Shade GS-No.4 or better Staining on Cotton GS-No.4 or better

BARREL CORD LOCK PLASTIC (For use for passage of cord at hood and waist)

a. Material Plastic (Acetal) b. Density 1.62 gm/cc + 0.1 gm/cc c. Colour Navy Blue & Black (As per approved sample) d. Weight 2.3 + 0.1 gm e. Spring Iron (Zinc plated)

Page 6 of 27

ETELET 10 MM (For use for passage of cord at hood and waist)

a. Material Brass b. Composition % age

Copper 63 + 3 Zinc 37 + 3

c. Colour/Finish Antique dull finish/Anodized d. Gauge

Eyelet 0.20 mm + 0.02 Washer 0.20 mm + 0.02

e. Wt Eyelet 1840 + 25 gm Washer 1330 + 25 gm

f. Dimensions As per sample SIZE LABEL 10 X 10 CM (For care/washing instructions and size label)

a. Wt/sq mtr 65 + 5 g b. Thread/25mm

Warp 110 + 2 Weft 68 + 1

c. Denier of yearn Warp 110 to 115 Den Weft 105 to 110 Den

d. Breaking Strength (10.2 x 16.8cm) Warp 118 + 10 kg Weft 68 + 5 kg

e. Bowl Test Satisfactory f. Material Polyester

g. Back side of label Back side of label shall be coated with polyurethane to retain dimensional stability

h. Printing The label shall be printed with disperse dye in black colour

j. Washing –ISO No.3 (repeat 4 x wash) No visible change in print k. Size As per requirement i. Colour White m. Weave Plain

TIP PLASTIC NAVY BULE & Black (For cord elastic & braided cord) a. Material Plastic b. Thickness 0.193 mm c. Shade Navy Blue & Black (As per approved sample)

FLEECE (For Lining of pocket) a. Material Polyester b. Colour Matching with ground shade of Navy Blue & Black. c. No of corse/25.4 mm 24 + 1 d. No of wales/25.4 mm 28 + 1 e. Shrinkage

Length 0.5%

Page 7 of 27

Width 0.5% SNAP BUTTON – 15 MM (For front closing off Jacket)

a. Material Brass b. Composition

Copper 63+ 3 Zinc 37 + 3

c. Colour/Finish Antique Bull Brass/Anodized

POLYESTER FABRIC (For polyester wadding liner)

a. Wt/sq mtr 55 g + 3 g b. Thread/25 mm

Warp 106 + 2 Weft 82 + 2

c. Denier Warp 75 + 5 Den Weft 60 + 5 Den

d. Shrinkage % Warp 1.0 % max Weft 1.0 % max

c. Breaking Strength (10.2 x 16.8cm BG) Warp 80 + 5 kg Weft 100 + 5 kg

f. Washing test No.2 Change in shade GS-4 or better Staining on Cotton GS-4 or better

g. Perspiration Test: (Acid/Alkaline) Change in shade GS-4 or better Staining on cotton GS-4 or better

h. Nature of Dye Disperse j. Material 100% Polyester k. Shade Navy Blue & Black as per approved shades l. Weave Plain

FABRIC FOR PIPING OF POLYESTER WADDING LINER (Same as inner lining of Jacket)

KNITTED CUFF

a. Wt/sq mtr 465 g + 5 g

b. Blending Composition Cotton 85% + 5 Polyester 15%

c. Count of Yarn Cotton thread 50 + 2 Tex Soliciting 80 + 3 En

d. No of needles 168

e. Shrinkage Warp 2% max Weft 2% max

f. Shade Navy Blue & Black (As per approved sample)

Page 8 of 27

h. Dye fastness to light Class V

J Washing Test No.3 Change in shade GS-4 or better Staining on cotton GS-4 or better

k. Perspiration Test (Acid/Alkaline) Change in shade GS-4 or better Staining on cotton GS-4 or better

l. Rubbing Test Dry GS-4 or better Wet GS-4 or better

POLYESTER WADDING (For insulating material of liner)

a. Material Polyester b. Wt/Sq mtr 250 g + 10g c. Thickness at 300 g Load 2.4 + 0.2 mm

POLYTHENE BAG TRANSPARENT (For packing of individual jacket/liner)

a. Material Polyester b. Thickness 0.127 + 0.027 mm c. Size Suitable size

BLUE JERSEY

S # Description. Test method Specifications. 1 Acrylic

AATCC20A-2005 65% (Minimum)

2 Nylon 4% (Minimum) 3 Polyester 25% (Minimum 4 Count of Yarn (Worsted Count) ASTMD1059-2001 20/2 ± 4% 5 Wales/inch ASTMD3887-1996 20 (Minimum) 6 Courses/inch ASTMD3887-1996 15 (Minimum)

7

Weight as per size:- 36 38 40 42 Extra 42

-

700 (Gram) (Minimum) 750 (Gram) (Minimum) 800 (Gram) (Minimum) 850 (Gram) (Minimum) 900 (Gram) (Minimum)

8 Dimensional Change (Due to Relaxation) 4% (Maximum)

9 PH Value (Aqueous extract) AATCC81-2006 5 to 8 10 Mercerized Drill Cloth will be used in middle of both arms and for Pocket Bag (as per colour)

11

Washing Fastness i) Change in Shade. Staining on Cotton. Staining on Polyester

ISO105C03-1989

4. (Minimum) 4 . (Minimum) 4 . (Minimum)

12 Dry Cleaning AATCC132-2004 4. (Minimum)

13 Light Fastness Test. (Fade-o-meter Test) (Xenon Arc Lamp, 16 hours)

AATCC 16-2004.Option 3 4 (Minimum)

14 Crock Meter Test i) Dry ii) Wet

AATCC8-2007 4-5(Minimum) 4 (Minimum)

15 Colour/Feel/Finish/Shade - Blue (as per pattern/Shade)

Page 9 of 27

16 Stitching thread - Nylon/Polyester.

TENT

Size 4 x 4 Meter and 4 x 3 Meter Center Height 2.15 Meter Wall Height 0.9 Meter Make Double Fly Double Fold Family Ridge Tent

Material Outer Fly: Single fold of 450 g/m² water & rot proof Poly cotton canvas, Consist of Approximately 50 % cotton and 50 % polyester blend ring Spinning yarn count 10 / 2 x 10 / 2 twisted in warp 46 / 48 x weft 26 / 28 Threads/ square inch, plain weave

Inner Fly: Two Folds Outer Fold: Single fold of 450 g/m² water & rot proof Poly cotton canvas, Consist of Approximately 50 % cotton and 50 % polyester blend ring Spinning yarn count 10 / 2 x 10 / 2 twisted in warp 46 / 48 x weft 26 / 28 Threads/ square inch, plain weave Inner Fold: Dosouti Lining made of 100 % cotton, yarn count 20 x 20 in warp and weft, 32 threads per inch in warp and weft, 2 x 2 weave, 170 g/m2 in finished state.

Colour Canvas White (Natural Canvas) Colour Lining Dyed yellow, uniform color-fast to water

Water Proofing Resistance to water penetration by paraffin emulsion and alum acetate to withstand minimum 50 cm hydrostatic head.

Rot Proofing Stabilization against decomposition of the fabric (rot-proofing) with copper naphtanate.

Frame

4-meter-long, 48 mm diameter painted steel pipe minimum 1.5 mm wall thickness (2 sections of 2 meter each screwed and socketed). 11 mm holes drilled at one end of other two sections for up -right poles pins to fit in each section. Two upright poles of 2.15 m each, made of 48 mm diameter powder coated painted steel pipe, minimum 1.5 mm wall thickness with screwed based plate of 15 cm diameter powder coated painted one end and a 10 cm diameter screwed top plate with 9 mm diameter powder coated painted, metal pin 10 cm long, welded to pole cap on other end.

Ground Sheet

Dimensions: 4 m x 4 m (16 m2), Composition: 180 gr/m2 Woven polyethylene fabric coated on both sides with low density polyethylene. Tensile strength: (N) ISO 1421: Warp 300 N minimum Weft 300N minimum Tear resistance: (N) - ISO 4674 (A2): Warp 60 N minimum Weft 60N minimum

Resistance to micro-organisms: Insensitive to micro-organisms. Water penetration resistance: ISO 811: 20 hPa minimum Fire resistance/retardancy: CPAI-84, 1980, Section 6 Resistance to UV: in percentage of tensile strength loss under ISO1421 after 300 hours UV under ASTM G53/94 (UVB 313 nm peak): Maximum 30% of strength loss on minimum required value and maximum 50% strength loss on original value of the same product.

Mud Flap 100 % PVC coated fabric of 450 gram / m2, UV resistance, single layer, 20 cm all around the tent.

Doors 2 doors with loop lacing

Windows 2 windows, one on each side with anti insect netting and adjustable canvas flaps. size 40 cm x 60 cm with cross strengthening bands

Logo

KP Police horizontal visibility logo printed in blue indelible ink on both sides of the outer fly tent (to be positioned horizontally) for maximum visibility. The width of the markings is 120 cm and the height proportionate to the width without any distortion of the logo and letterings (approximately 35cm).

Ropes Material: Guy ropes made of 9 mm 3 strands nylon or polypropylene with tensile strength of not less than 300 kg, knotted securely to tent. Guy runners made of 5 mm

Page 10 of 27

diameter galvanized steel, approximately 11 cm long. Loop lacing for doors -5 / 7 mm cotton spun yarn.

Accessories

All accessories & tools for ready use, Pegs: 12 metal powders coated painted pegs T-bar type, length 50 cm.2 cm x 2 cm x 2 cm, 3 mm thick. Pins: 12 metal powder coated painted pins of 25 cm long before hooking, made of steel rod 9 mm diameter. Hammer: one metal hammer of 1.5 kg with 45 cm wooden tapered handle. Repair kit: one repair kit, consisting of one straight and one curved strong needles with 20 m of suitable thread for repairing the tent. Instructions sheet: one assembly instruction sheet.

Packing Outer / inner flies and groundsheet folded and rolled with all accessories and poles wrapped in canvas cloth inside the bundle. Each bundle shall then be polyethylene-lined, wrapped with strong hessian cloth and stitched and strapped with nylon bands.

Weight 85 kg Volume 0.25 Cbm

MARQUEE TENT Size 10 x 20 M Height 3.5 M Wall Height 1.8 M Make Double Fold Outer Fold 720 g/m.sq water proof, rot proof cotton canvas Inner Fold Breathable dyed red, yellow, green color cotton sheeting of 170 g/m.sq Frame Anti rested painted iron poles, Painted Iron base plates and painted iron joints. Mud Flap Made of White HDPE fabric ,270 g/m.sq - 20cm on wall & 30 cm as mud flap Doors 2 big & 2 small doors with anti insect netting and rolled up flaps. Windows 8 windows with anti insect netting and rolled up flaps

Accessories All accessories and tools for ready use, iron poles, iron pegs, ground pins, iron hammer and a repairing kit.

Packing Each tent packed with all accessories in one rolled bale, wrapped into polythene and then a good quality HDPE bag and then sealed by three steel straps.

TENT (SHAMIANA, CATERING ETC) VIP Water Proof Canopy with Polls

VIP Water Proof Kanat VIP Foam Chairs 100 Nos. VIP Round Tables for 8 persons 15 Nos. Table Cloth 80 Nos. Chair Covers VIP 120 Nos. Table Frill 80 Nos. VIP Full Plate (Melamine) 120 Nos. VIP Quarter Plate (Melamine) 120 Nos. VIP Bowl (Melamine) 120 Nos.

Page 11 of 27

VIP Dish for Salad (Melamine) 15 Nos. Table Knife (Steel) 100 Nos. Table Spoons (Steel) 100 Nos. Tea Spoons (Steel) 100 Nos. Fork (Steel) 100 Nos. Salt & Pepper Set 30 Nos. Vine Glasses 120 Nos. Normal Glasses 50 Nos. Flower Vase 15 Nos. Sheaf-in-dish (Stain-Less-Steel) with Cotton Burners 16 Nos. Sheaf-in-dish Table 10 Nos. Sheaf-in-Dish Spoons 32 Nos. Runner Carpet 4ft. x 40 ft. Stage 12ft. x 8ft. Carpet for Stage 12ft. x 8ft. Frill for Stage 12ft. x 8ft. Central Table for Stage 01 No. VVIP Seats/Chairs for Stage 05 No.

Carpets for full Canopy of 100 Persons All Crockery Should be packed in boxes

RIFLE/GUN OIL PX-04 OR EQUIVALENT S # Parameter Testing Standards 1 pH ASTM D1293 2 Kinematic Viscosity ASTM D445 3 Pour Point ASTM D97 4 Flash Point ASTM D92 5 Density ASTM D1298 6 Ash contents ASTM D482-07 7 Copper corrosion ASTM D4048 8 Oxidation Stability ASTM D4871

FLANNEL CHINDI S # Description Parameters 1 Type Rifle Gun cleaning red stripe cloth

2 Composition 1. 100 % Cotton 2. Flannel 4" x 2" Brushed Both Side 3. Red Stripe at every 2"

3 Standard Roll Length 10 meters

(

Page 12 of 27

BANDOLIER (SPECIAL)

S # SPECIFICATION 1 Light Weight 2 6” Height and 10” girth adjustable shoulders and vest

3 Vest is mounted on tough nylon mesh breathable lining material which aids ventilation

4 Materials : 100% Polyamide 5 Lining 100% Polyester 6 Designed for Hot Weather 7 Waterproof, Ventilate, Flame retarding and wearable. 8 Color Black 9 Design- Sleeve less, shoulder padded

10 Left side features a Pistol holster capable of carrying most medium-framed (9mm Pistols) with 1 Pistol Magazine pouches.

11 4 SMG magazine pouches with 4 multipurpose adjustable pouches stitched over which are fully adjustable to the height of most normal-sized Grenades (Gas, HE etc)

12 Vest zips up in front. 13 Left and right sides can be adjusted for width via drawstrings. 14 One pouch for carrying pocket phone on top front left-side of the vest. 15 One pouch on right side for carrying CDO Knife. 16 One Rucksack (Backpack) fixed on backside.

Sample design

BANDOLIER (ORDINARY) S # SPECIFICATION 1 Light Weight 2 Materials : 100% Polyamide 3 Designed for Hot Weather 4 Waterproof, Ventilate, Flame retarding and wearable 5 Size: M-XL (Adjustable) 6 Color: BLACK 7 3 SMG Magazine Pouches on the front.

8 4 multipurpose adjustable pouches 2 on each side which are fully adjustable to the height of most normal-sized Grenades (Gas, HE etc)

9 Adjustable padded shoulder straps with pocket 10 Adjustable quick release vest belt 11 Fits perfectly over IBA, OTV, or CVC vests 12 Reinforced Stitching 13 Padding accommodates a heavy load

Sample design

Page 13 of 27

SLING SMG S # SPECIFICATION

1 Light Weight

2 Materials : 100% Polyamide

3 Designed for Hot Weather

4 Waterproof, Ventilate, Flame retarding and wearable

5 Size: M-XL (Adjustable)

6 Color: BLACK

7 Fits perfectly over IBA, OTV, or CVC vests

8 Reinforced Stitching

9 Padding accommodates a heavy load

Sample design

JERSEY BARRIERS

STRUCTURE Material Painted Steel Pipe SIZE Height 4 ft Length 5 ft Pipe Dia 44 mm (Minimum) Pipe Gauge 14 (Minimum) WARNING DISPLAY Material Iron Sheet Gauge 16 (Minimum) Size 21 inches X 15 inches (Minimum or as per design) SUPPORTINGS Material Iron Gauge 16 (Minimum) Size 37 mm (Minimum width) Center support Pipe 1 inch (25 mm) (Minimum) FINISHING Wheels revolving lockable Color Red & White (Reflector with Red tape)

Page 14 of 27

HESCO CONCERTINAER BARRIERS

Container Concertinaer units are manufactured with an Alu-zinc coated welded wire mesh. The mesh has an opening size of 76.2mm x 76.2mm and is made from 8 Gauge 4mm steel.

Galvanizing: The Alu-Zinc coating (95% zinc and 5% aluminum) has a average weight of 125-145 g/m2. (ASTM A90-90M)

Geo Textile:

Geo textile is 2mm Heavy Duty Non-Woven, Polypropylene, impregnated with a UV inhibitor, Fire Hazard & Semi-Water proof.

Weld Shear Strength

The minimum average shear value in pounds-force shall be 70% of the breaking strength of wire. (ASTM A 185) Tensile Strength = 85,000 to 70,000 lbs. P.S.I Yield Strength = 75,000 to 65,000 lbs. P.S.I

Yield Strength is the stress at which a material exhibits a specified limiting deviation from the proportionality of stress strain. The deviation is expressed in terms of strain, percent offset, total extension under load, etc. Determine method by “Extension under load.”

SIZE 1. Height 04 Feet & 06 Inch, Length 14 Feet, Width 04 Feet. 2. Height 04 Feet & 06 Inch, Length 02 Feet, Width 02 Feet. 3. Height 4.5 Feet, Length 3.5 Feet, Width 3.5 Feet 4. Height 3.3 Feet, Length 3.3 Feet, Width 3.3 Feet 5. Height 02 Feet, Length 02 Feet, Width 02 Feet Manufactured under ISO9001-2000 Quality Management System

Blast Test Standards

MIL 1 reconfigured as ‘thin-wall’ (50cm thick) for possible use as protection for accommodation tents.

Blast Wall assaulted with: Chinese Type 65 107mm HE rocket at 2m from base of wall.

o 2 x RPG-7 Anti-Personnel rounds into wall. o 2 x 40mm M203 HEDP rounds, one into wall, one splash at front o 400 Rounds 5.56mm Ball

Page 15 of 27

COBEY HOUSE (CONTAINER HOME)

20 FEET PORTA CABIN CONTAINER WITH TOILET/BATH

CONTAINER

Providing and Supplying of 20 feet X 08 feet X 10 feet Container having following Dimensions / Material of windows, Doors with Security Grill, and steel open able shutters / locking arrangement including insulation with two inch thick thermo pore and paneling of laminated MDF 7mm of approved quality / Material covering all sides including ceiling, Three number Electrical Fan / bracket fans, three number Electrical Energy Savers / Bulb Electrical Wiring with Switch board / Panel board of standard specification. Door 1 X2.5feet X6.5feet Window 2X2feet X 1.5feet Fixed Folding Beds 4X2.75feetX6feet Small folding cupboard 4X2feetX2feet

BATH ROOM/TOILET

Bath room 4feetX4feetX 10feet having WHB, Shower with o all C.P fitting, Exhaust fan, Electrical Bulb

with Wiring having 2feetX6feet Door

Toilet

4feetX4feetX10feet having WC with all C.P fitting, 300 Galen over head Water Tank, Soakage Pit, Exhaust fan, Electrical Bulb, and Wiring, 2feetX6feet Door

20 FEET PORTA CABIN CONTAINER WITHOUT B TOILET/BATH

CONTAINER

Providing and Supplying of 20 feet X 08 feet X 10 feet Container having following Dimensions / Material of windows, Doors with Security Grill, and steel open able shutters / locking arrangement including insulation with two inch thick thermo pore and paneling of laminated MDF 7mm of approved quality / Material covering all sides including ceiling, Three number Electrical Fan / bracket fans, three number Electrical Energy Savers / Bulb Electrical Wiring with Switch board / Panel board of standard specification Door 2 X2.5feet X6.5feet Window 2X2feet X 1.5feet Fixed Folding Beds 5X2.75feetX6feet Small folding cupboard 5X2feetX2feet

Page 16 of 27

METAL DETECTORS One switch operation. Must be Rugged, high-impact ABS case with reinforced coil compartment. Should detect ferrous, non-ferrous, and stainless steel weapons, contraband, and other metallic objects. Must have large 10” scan surface for quick, thorough scanning. No tools should be required to change battery. Must have audible or vibrating alarm. Sharp audible alarm and bright red LED indicates the detection of metal. Should have Momentary push button temporarily eliminates detection of nearby ambient metal such as rebar, metal walls, etc. Operating Temperatures -35º F (-37º C) to 158º F (70º C) Humidity To 95% non condensing Audio Frequency 2kHz Warble Battery Single 9 volt battery provides up to 100 hours of normal operation. Make USA/Europe/South Africa/China Complete with rechargeable Kit (Charger and two batteries). The firm should make sour the availability of parts for at least 10 (ten) years on reasonable cost.

CCTV SYSTEM (Turn key solution) 15.1 PTZ Camera

Zooming (Minimum):37X(Optical Zoom) & 12x (Digital Zoom) or better 600TV Lines Resolution or better Min. Illumination: 0.0001 Lux @ B/W Mode. Sens-up Auto Privacy Zones Masking preset Position Weather proof / water proof Auto Iris All Complete Installation accessories

15.2 STATIC ZOOM Camera outdoor

30X Optical Zoom and 12X Digital Zoom or better 600 TV Lines Resolution or better Min. Illumination: 0.0001 Lux or infrared facility Superior Low Light Performance Weather proof / water proof Auto Iris All Complete Installation accessories

15.3 STATIC Camera indoor

600TV Lines Resolution or better Min. Illumination: 0.0001 Lux or infrared facility Superior Low Light Performance Weather proof / water proof Auto Iris All Complete Installation accessories

Page 17 of 27

15.4 DVR

16 channels Real Time Recording Various Recording Resolutions (D1,Half D1, CIF) IP based facility H.264 / JPEG Dual Codec Extended Recording through e SATA Storage 2 TB HDD or Higher Supper drive Multiplex ( Live / Playback, Recording, Backup, Networking ) Automatic Backup by Schedule Health Check (HDD,FAN) Remote Monitoring / Management Rack for DVR

15.5 PTZ CONTROLER

Compatible with PTZ domes and Zoom cameras and DVRs User –friendly Graphic & User Interface 128 Preset Positions 8 Privacy Zones Masking (minimum) Home Positioning

15.6 CABLING

RG 11 as per actual measurement with ducting & civil work if required Note:- The firm should make sour the availability of parts for at least 10 (ten) years on reasonable cost.

FLASH LIGHTS Normal light SOLAR light Product Description LED Flood light / Solar Solar LED Flood light Input voltage 220 V/ 12V-24V 12V-24V Number of LED 36 minimum 36 minimum LED Wattage 150 W 150 W LED material BRIDGELUX or Equivalent BRIDGELUX or Equivalent Color Temperature Pure White Pure White Life Time 50000 hrs minimum 50000 hrs minimum Warranty period 3 years 3 years Mounting Wall Brackets / Poles Wall Brackets / Poles Body Material Aluminum Alloy or Equivalent Aluminum Alloy or Equivalent Body Features Waterproof Waterproof The firm should make sour the availability of parts for at least 05 (five) years on reasonable cost.

Page 18 of 27

DESKTOP COMPUTERS Processor Intel 4th Generation Core i5 (3.2GHz, with 6MB Cache or higher) Chipset Intel® Q85 Chipset or higher Memory 4GB 1600 MHz DDR3 or higher Hard Disk 500GB 7200 rpm SATA or higher Optical Drive Slim Super Multi DVD-RW drive Graphics Integrated Graphics Audio Integrated High Definition Audio LAN Integrated Gigabit NIC Input Devices USB Keyboard & Optical Scroll Mouse Monitor 18.5-inch Widescreen LED Display Operating System Licensed Genuine Windows 8 Professional 64 bit Anti Virus Licensed Kaspersky/Panda/Norton or equivalent with original media CD Warranty 03-Year Warranty The firm should make sour the availability of parts for at least 05 (five) years on reasonable cost.

PRINTERS Printer (B&W) - HP or Equivalent Printing Speed 33 ppm or higher Print Quality 1200 x 1200 DPI Print Technology Laser Duplex Built-in Automatic two-sided duplex Printing Paper Input 50-sheet multipurpose tray, 250-sheet input tray Paper Output 150-sheet output bin Media Sizes A4, Legal and all other Processor 800 MHz Memory 256 MB Warranty 01-Year Warranty The firm should make sour the availability of parts for at least 03 (three) years on reasonable cost.

UPS 1 KVA (Imported) Backup 15 minutes (minimum) on full load Minimum recharging time 01-Year Warranty The firm should make sure the availability of parts for at least 03 (three) years on reasonable

cost.

STABILIZER (3000-WATTS) Capacity 3000-Watts Input 80V Output 200-240V Bobbin Dia 2’ x 3’ Wire gauge 16

Page 19 of 27

Wire quality Preferably Mujahid/Ghazi Lux (or equivalent) Rely 25 Amp Power 3000 Watts Shields (Patri) Silicon Warranty 1-year The firm should make sour the availability of parts for at least 03 (three) years on reasonable cost.

SERVER MACHINES Base Model DL 380p Gen8 Rack mount server (or equivalent)

Processor (1) Intel Xeon E5-2630 v2 (2.6GHz/6-core/15MB/7.2GT-s QPI/80W, DDR3-1600, HT, Turbo2- 3/3/3/3/4/5)

Memory 16GB (1x16GB) PC3L-12800R (DDR3-1600LV) Registered DIMMs (Total 24 DIMM slots)

Cache Memory 15MB (1x15MB) Level 3

Network Controller Ethernet 1Gb 4-port 331FLR Adapter Storage Controller Smart Array P420i/1GB FBWC (RAID 0/1/1+0/5/5+0/6/6+0) Hard Drive (3) 600GB 6G SAS 10K 2.5in Hot Plug Hard Drives Optical Drive SATA DVD-RW Optical Drive PCI-Express Slots 3 PCIe slots (+3 PCIe slots available with upgrade option) Power Supply (2) 460W CS Platinum Plus Hot Plug Power Supplies (94% Efficient) Fans (4) Hot plug Fans (N+1 redundancy standard) Warranty 3-Years Parts & Labor Warranty Input devices USB Keyboard and Optical Scroll Mouse Display 18.5” LED Form Factor Rack (2U) The firm should make sour the availability of parts for at least 05 (five) years on reasonable cost.

2D BAR CODE READER

OPTICON (OPI 2201) or equivalent The firm should make sour the availability of parts for at least 03 (three) years on reasonable cost.

CONCERTINA WIRE

Reference Number Blade Style Thickness

(mm) Wire Dia

(mm) Barb Length

(mm) Barb Width

(mm) Barb Spacing

(mm) BTO-22

(Barbed Tape Obstacle)

0.5 + 0.05 2.5 + 0.1 22 + 1 15 + 1 34 + 1

S # Description Specification 1 Coil Dia (mm) 700 mm 2 No. of Circles 72 3 Standard Covered Length 7 – 8m 4 Maximal Covered Length 10m

Page 20 of 27

S # Description Specification

1 Coating Thickness Hot dip galvanized coating. Surface variation in wire dia = ±0.5%. Coating thickness = 125 to 145 gm per square meter.

2 Standard Material CBT-22 HD Galvanized Zinc.

3 Quality Standards ASTM A 90 M ISO 9001 (2008)

4 Packing Inner Packing = In plastic film Outer Packing = In weaving bag strip Weight = 10 kg (Per Coil)

WATER CANNONS DISCRIPTION. REQUIREMENTS. Model. According to design Driver cab type. Floating Chassis usage type. Any Chassis but can fulfill the requirement Wheel configuration. 4X2 or 4x4 Engine. According to design Make & model. 2014 Type w/cooled, (Diesel) No. Of cylinder. According to design Total displacement. According to design Power According to design Torque. According to design Fuel system. Diesel. Fuel tank capacity. According to design Transmission. Steering. Power assisted Spec. Riot control Anti-climbing design Main components. Distribution. Foam, tear, dyestuff, pump, auxiliary Water tank 7000To9000L or( accd to design) Gas tank 200Litre/According to design Dye tank 200 Liter/ According to design Foam tank 100 Liter / According to design Max shooting range of water cannon. 50 meters or according to design Front bulldozer Power -full shovel Storage Pump& pump engine Centrifugal pump preferable Japan Piping system Stainless steel unit inside Electric equipment Control panel Contrived control panel Vehicle protection Mesh from stones and baton hit Beacon lamp One Electronic siren. One Projector mounted on roof. Optional Recording cameras Optional Rear view camera with LCD inside. Optional Others Air conditioner Optional

Page 21 of 27

Run flat tires Optional Price In Pak Rupees The firm should make sour the availability of parts for at least 10 (ten) years on reasonable cost.

DOUBLE CABIN (4 X 4 PICKUP)

Description --------- Engine --------- Displacement According to design Fuel system According to design Exhaust system According to design Max torque nm/rpm (158@2500)(216@200) or according to design Max output (94/4200@2500)(102/3600) Power to weight ratio According to design Length (mm) According to design Width (mm) According to design Height (mm) According to design Wheel base (mm) According to design Country of origin Pak made Brakes Preferably ABC Tyres Radial + alloy rims Air conditioner Preferably The firm should make sour the availability of parts for at least 10 (ten) years on reasonable cost.

STROBE LIGHTS

Model As per design Power supply 12 VDC Working temp 40 ~ 50 C Length 1.2m Light type Strobe LED (Lamp per light head) or according to design Alley light Halogen Lens color Red & Red, Blue & Blue, amber & amber or blue & red or according to

design Mounting & fixed roof Permanent Material of lens Polycarbonate (PC) or new technology Mounting bracket Stainless steel Chassis material Aluminum Speaker 100w speaker inside (water proof) PA SYSTEM Model JD siren Voltage 12 volt Power 12 V.DC Rated power 100w or according to design Rated impendence 4, 6, 8 Ohms or according to design Sound pressure 120 ~ 130 db Frequency range 400 ~ 4000 Hz or according to design Tones Wail, yelp, hi-lo, air-horn Function Light control, hand Mic G W ? Latest technology and design will be preferred, for strobe light and PA system For quality assurance siren will be played continuously for maximum duration Fading of Lens color be guarantee

Page 22 of 27

Description Model code/year of manufacture Engine type/No of cylinder & arrangements According to design Displacement 2400 cc to 3200 cc Exhaust system According to design Fuel system According to design Max torque nm/rpm (158@2500)(216@200) or according to design Max output (94/4200@2500)(102/3600) or according to design Color White color Length (mm) According to design Width (mm) According to design Height (mm) According to design Wheel base (mm) According to design Curb weight 1200 to 1800 kg or according to design Gross vehicle weight 2500 to 3000 kg or according to design Transmission 5 speed manual Brake type (front/rear) Ventilated disk/leading – trailing drum/ABS preferably Suspension type (front/rear) Double wishbone/leaf rigid Tyres Radial Fuel tank capacity According to design The firm should make sour the availability of parts for at least 10 (ten) years on reasonable cost.

BODY FABRICATION Pipe size 1 ½” x 1 ½” x 18 gauge Pipe size 1 ¼” x 1 ¼” x 18 gauge Angle iron seat stands size pipe size 1 ½” x 18 gauge Pipe for seat size 1 ¼” x 1 ¼” x 1/8” Deyar wood for seat size thickness 1” Master chora foam for seat size 4” Width of seat 14” x 18” Best quality Japanese raxine for seat cushion Steel sheet for ceiling 20 gauge (upper side) Angle iron or pipe for foot rest rear size 8’ x 5’ x 1” x 1” Pipe for body cross size 1 ¼” x 1 ¼” (18 gauge) Water proof tarpaulin best quality (4 thread) Electrics wiring for rear body. Best quality. Rear body light 2 numbers Body paining (complete inside, outside) Height from floor to ceiling 4’ -4” Seating capacity 6 numbers (separate according to sample) or 10 seaters Gunman table 12” x 12” (1 ½” x 1 ½” angle iron) Gun fitting stand on top of the front body Glass sliding 5mm with frame and safety grill fitted outside Grill size according to sample Both sides door white painted Word “POLICE” be written on both doors Police insignia on front bonnet 2 numbers leaf spring both sides to be fitted in rear road spring The firm should make sour the availability of parts for at least 10 (ten) years on reasonable cost.

Page 23 of 27

MOTORCYCLES DESCRIPTION REQUIREMENTS Engine 04-strokes, OHV air-cooled, 125cc or Equ Bore + Stroke 56.5 x 49.5 mm or according to design Max Torque 0.94 Kgf – 3/2500 rpm or according to design Starter Kick/Self Transmission According to design Fuel tank 10-15 liters Wheelbase According to design Suspension (Front & Rear) According to design The firm should make sour the availability of parts for at least 10 (ten) years on reasonable cost.

800 CC VAN EGINE SPECIFICATIONS Engine type 04-stroke water cool Cylinders 3/4 Bore/stroke 68.5 x 72 Piston displacement 800cc minimum SAFETY Seat belt Front DIMENSIONS (MINIMUM) Overall length (mm) 3300 Overall width (mm) 1405 Overall height (mm) 1410 Wheelbase (mm) 2175 STEERING Turning Radius 4.4 m CAPACITIES Loading capacity 550 Kg including 02 persons Fuel Tank Minimum 36 liters WHEEL AND SUSPENSION Tyre size As per design Suspension (Front) Strut/coil spring Suspension (Rear) Leaf spring TRANSMISSION Transmission type 04-Forward Synchromesh, 01-Reverse Gear The firm should make sour the availability of parts for at least 10 (ten) years on reasonable cost.

VAN (CANINE K-9 CENTRE) EGINE SPECIFICATIONS Engine type 04-stroke water cool Cylinders 3/4 Bore/stroke 68.5 x 72 Piston displacement 800cc minimum SAFETY

Page 24 of 27

Seat belt Front DIMENSIONS (MINIMUM) Overall length (mm) 3300 Overall width (mm) 1405 Overall height (mm) 1410 Wheelbase (mm) 2175 STEERING Turning Radius 4.4 m CAPACITIES Loading capacity 550 Kg including 02 persons Fuel Tank Minimum 36 liters WHEEL AND SUSPENSION Tyre size As per design Suspension (Front) Strut/coil spring Suspension (Rear) Leaf spring TRANSMISSION Transmission type 04-Forward Synchromesh, 01-Reverse Gear The firm should make sour the availability of parts for at least 10 (ten) years on reasonable cost.

POLO STICK

S # Description Parameters 1 Type High quality solid Bamboo stick 2 Length Minimum 1.22 m or 04 feet 3 Diameter 20-25 mm 4 Features: Dry, Natural straight & antisepsis 5 Color Natural yellow 6 Shape Rounded ends 7 Grip Black Leather with stripe

Sample available

ANTI RIOT SUITS

S # Description Parameter 1 Material Made of high quality material with reinforce design.

2 Size Fit to body height i.e.:- o Small and medium = 1.60 to 1.75 cm o Large = More than 1.75 cm

3 Protection

Effective protection from head to toe. Ability to resist spike blow Ability to resist sharp impact Ability to absorb blunt strike Capable to protect chest, back, arms, sides, shoulders, elbows, groin, laps, knees and shins (easy to wear)

4 Flexibility Flexible in bending, running, jumping, turning and kneeling down 5 Weight Light weight (05-Kg maximum) 6 Color Black

7 Design Police Marking on both front & back sides with yellow reflecting ground and black words

Page 25 of 27

Accessories Shield = Polycarbonate or equivalent Helmet = Light weight with face & neck protection

GAS MASKS (RESPIRATORS) S # Description Parameters

1 Design

Suitable for the Tactical operations and comfortable in wearing. Full face Gas Mask and side container design. Soft, friendly with the human skin without any irritation. Effectively protect eyes and respiratory organs against toxic agents

2 Exhalation resistance < 98pa (Minimum) 3 Inhalation resistance < 29pa (Minimum) 4 Statically Tightness Pressure drop not more than 176 pa/min.

5 Air-Tightness Pressure drop not more than 176 pa/min.

6 Protection Protection through the filter against the Tear Gas (CS & CN).

With suitable filter to provide protection against the Tear Gas.

AMMUNITION CARRIER (GAS SHELLS ETC)

S # SPECIFICATION

1 Light Weight

2 Materials : 100% Polyamide or equivalent

3 Designed for Hot Weather

4 Waterproof, Ventilate, Flame retarding and wearable

5 Size: M-XL (Adjustable)

6 Color: Black

7 10 Pouches on the front for Tear Gas Shells (5 on each side)

8 8 multipurpose adjustable pouches 3 on each side and 1 on top which are fully adjustable to

the height of most normal-sized Grenades (Gas, HE etc)

9 Adjustable padded shoulder straps with pocket

10 Adjustable quick release vest belt

11 Fits perfectly over IBA, OTV, or CVC vests

12 Reinforced Stitching

13 Padding accommodates a heavy load.

14 Fixed multipurpose carrying backpack (rucksack) on the back side.

Sample available

Page 26 of 27

1300 CC MOTORCAR ENGINE SPECIFICATIONS

Engine type As per design

Engine Displacement Up to 1300 cc

Fuel system EFI with VVTi

Max. output (km/rpm) 63 (84) / 6000

Max. Torque (Nm/rpm) 121 / 4400

PERFORMANCE

Transmission 5 Speed MT Brakes Fr. /Rr. Ventilated Disc/Solid Disc/ABS Suspension Fr./Rr. Macpherson Strut/Torsion Beam Stabilizer Bar Front/Rear Steering Electric/Power Steering system Tyre and wheel As per design Fuel tank capacity Minimum 55 liters SAFETY Key reminder warning Yes Light on warning Yes WIL seats Whiplash injury lessening concept seats

Seat Belt Fr./Rr. Driver + Passenger: 3 Points ELR/Airbag, 2 Passenger: 3 Point ELR & Centre Passenger: Non-Retractable

GOA Body O (with Crumple Zones) DIMENSIONS (MINIMUM) Exterior L x W x H (mm) 4540 x 1760 x 1545 Interior L x W x H (mm) 1890 x 1450 x 1195 Wheel Base (mm) 2600 Minimum turning radius (m) 5.3 The firm should make sour the availability of parts for at least 10 (ten) years on reasonable cost.

1000 CC MOTORCAR ENGINE SPECIFICATIONS Engine type As per design Cylinders 4 Engine Displacement Up to 1000 cc Bore x Stroke (mm) 72.0 x 61.0 Compression Ratio 9.3:1 Max. output (km/rpm) 45 / 6000 Max. Torque (Nm/rpm) 78 / 4500 PERFORMANCE Transmission 5 Speed all Synchromesh Brakes Fr. /Rr. Disc/Drum Suspension Fr./Rr. Macpherson Strut, coil spring independent/strut coil spring independent Stabilizer Bar Front/Rear Steering Rack & Pinion/Power steering Tyre and wheel As per design Fuel tank capacity Minimum 40 liters SAFETY

Page 27 of 27

Key reminder warning Yes Light on warning Yes WIL seats Whiplash injury lessening concept seats Seat Belt Fr./Rr. Driver + Passenger: 3 Points ELR, 2 Passenger: 3 Point ELR & Centre Passenger: Non-

Retractable GOA Body O (with Crumple Zones) DIMENSIONS (MINIMUM) Overall length (mm) 3845 Overall width (mm) 1590 Overall height (mm) 1380 Wheelbase (mm) 2365 Tread Fr./Rr. (mm) 1364/1340 Minimum Turning Radius(m) 4.8 Ground clearance 170 The firm should make sour the availability of parts for at least 10 (ten) years on reasonable cost.

800 CC MOTORCAR BODY TYPE Body type 05 doors hatchback DIMENSIONS (MINIMUM) Overall length (mm) 3300 Overall width (mm) 1405 Overall height (mm) 1410 Wheelbase (mm) 2175 Tread (mm) Front 1215 Tread (mm) Rear 1200 Minimum Turning Radius (m) 4.4 ENGINE SPECIFICATIONS Engine type OHC-EFI Cylinders 3 cylinder Bore/Stroke 68.5 / 72m Piston displacement Minimum 800cc Max output 29.4/5.500 Minimum Torque 59.0/3.000 CHASSIS Steering Rack and pinion Suspension (Front) Strut coil spring Suspension (Rear) Leaf spring Brakes (Front) Disc Brakes (Rear) Drum Tyres As per design Seat belt Yes CAPACITIES Seating 5 Fuel tank Minimum 30 liters The firm should make sour the availability of parts for at least 10 (ten) years on reasonable cost.