SpeciesBlack Oak, Oak Roast, Oak Distressed, Toscana, Aosta, Artic Natural GrainNatural Moisture6 – 10% Dimensional Stability 0.80% change in width.
Mar 31, 2015
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Species Black Oak, Oak Roast, Oak Distressed, Toscana, Aosta, Artic Natural
Grain Natural
Moisture 6 – 10%
Dimensional Stability
0.80% change in width 0.67% change in thickness at 50% relative humidity change over a period of 48 hrs.
Coating Aluminum Oxide for High Scratch Resistance
Finishing Antiq Finish
Joinery Patented Click / T & G
Size 1830 X 189 X 15 mm
Core Board Oak Wood / Poplar Wood
Top Layer Thickness
4 mm
Species Olive Oak, Smoked Oak, Golden Oak
Grain Natural
Moisture 6 – 10%
Dimensional Stability
0.80% change in width 0.67% change in thickness at 50% relative humidity change over a period of 48 hrs.
Coating Aluminum Oxide for High Scratch Resistance
Finishing Antiq Finish
Joinery Patented Click / T & G
Size 1830 X 148 X 15 mm
Core Board Oak Wood / Poplar Wood
Top Layer Thickness
4 mm
Species Natural Oak, White Oak, Walnut, Teak, Merbau
Grain Natural
Dimension 2200 x 202 x 14.5 mm
Dimensional Stability 0.80% change in width 0.67% change in thickness at 50% relative humidity change over a period of 48 hrs.
Coating Aluminum Oxide for High Scratch Resistance
Finishing Silk matt
Joinery Patented Click / T & G
Moisture 6-10%
Steel Wool astm / En 438 S33 Sandpaper 1000 gm Average Cycles
2375
Resistance To Glowing Cigarette
6 C
Steel wool anti scratch resistance DIN 68 861 part 6
4A (will not scratch)
Inflammability DIN 4102 B1
Impact Test 1 kg. 30 cm height Good
Ring Pressure Excellent
Heat Test 1 kg. 30 cm height 120 Degree Celsius
Chemical Resistance Din 68 861 Part 1 1 B
On the Taber (hardness) test, this UV cured finish withstands a 1000 gram weight at 1000 cycles.
Our product lost only 63.5 milligrams of finish per 1000 cycles, and only 21-25 milligrams per mil of thickness.
Our product carries a limited warranty of ten years in Domestic usage. (No warranty for heavy commercial use.)
WOOD IS A NATURAL PRODUCT AND SO THERE ARE DIFFERENT COLORS AND FIBRES WHICH MAKE THEM DIFFERENT FROM EACH OTHER. WOOD GETS LITTLE DARKER AND UNIFORM, ONCE IT IS EXPOSED TO LIGHT.
SPECIAL TREATMENT REMOVES ALL SOFTER PARTS OF THE WOOD FROM THE SURFACE ENHANCING THE VEINS IN THE HARD WOOD.
IN CASE OF OILING AND SPECIAL TREATMENT, WOOD ABSORBS OIL SHOWING UP ITS NATURAL BEAUTY.
Steel Wool ASTM / EN 438 S33 Sandpaper 1000 gm. Average Cycles
2375
Resistance to Glowing Cigarette 6c
Steel wool anti scratch resistance DIN 68 861 part 6
4A (will not scratch)
Inflammability DIN 4102 B1
Impact Test 1 kg. 30 cm height Good
Ring Pressure Excellent
Heat Test 1 kg. 30 cm height 120 Degree Celsius
Chemical Resistance Din 68 861 Part 1 1 B
3-LAYER WOOD FLOORS ARE BUILT HAVING MULTIPLE THIN PLY LAYERS THAT ARE GLUED TOGETHER. THE INNER CORES ARE GENERALLY EITHER A HARDWOOD AND/OR SOFT PLYWOOD TYPE MATERIAL, WHICH INCORPORATES THE TONGUE AND GROOVE SYSTEM. THE TOP THICKER HARDWOOD VENEER WEAR LAYER IS GLUED ON TOP SURFACE OF THE CORE AND IS AVAILABLE IN ALMAST ANY HARDWOOD SPECIES.
ANTIQUE FLOORS HAVE A LIFESPAN ANYWHERE FROM 10-25 YEARS.
USING AN ANTIQUE WOOD FLOOR ALLOWS YOU TO HAVE A WOOD FLOOR ON ANY GRADE LEVEL.
IT CAN BE USED ON WOOD SUB FLOORS OR DRY CONCRETE SLABS.
BETTER SUITED FOR HUMID AREAS OF THE COUNTRY.
ANTIQ FLOORS ARE VERY EASY AND FAST TO INSTALL.
ANTIQU FLOORS ARE MORE DIMENSIONALLY STABLE THAN SOLID WOOD FLOORS.
ANTIQ FLOORS ARE AVAILABLE IN MANY DIFFERENT SIZES, COLORS AND STYLES.
SOME ANTIQ FLOORS CAN BE SANDED AND REFINISHED NEW AGAIN IF NEEDED.
ANTIQ FLOOR COVERING INCREASES THE VALUE OF YOUR HOME.
ANTIQU FLOOR DOES NOT CAUSE ALLERGIES, RECOMMENDED TO USE BY ALLERGISTS.
BEST SURFACE CONDITIONS WITH HIGHEST ABRASION RESISTANCE.
NO SANDING WAXING AND LAQUERING.
RESISTANT TO CIGARETTE BURNS.
SHOCK PROOF AND WEAR RESISTANT.
SIMPLE AND EFFICENT INSTALLATION.
FIRM AND STABLE FOR UNDER FLOOR HEATING AS IT ADJUSTS TO SEASONAL CHANGES IN TEMPERATIURE AND HUMIDITY.
PATENTED CLICK SYSTEM.
ZERO MAINTENANCE.
ADDITIONAL COATING OF ALLUMINIUM OXIDE FOR SCRATCH RESISTANCE AND DURABILITY.
SUITABLE FOR FLOOR HEATING PLANTS
The finish is a blend of urethane, aluminum oxide, and silica for a very durable and long lasting finish.
The flooring is coated 4 (2.5 mil) times on our natural finish and 5 (3.0 mil) times on our stained finishes.
This makes our finish one of the thickest available, on top of an already impressive 4mm solid wood floor.
Related Documents
