® ® Engine Engine Model 3054C DIT Gross Power – SAE J1995 75 kW 101 hp Net Power – SAE J1349 72 kW 97 hp Weights Operating Weight – Nominal 7294 kg 16,066 lb Operating Weight – Maximum 10 700 kg 23,568 lb Backhoe Dig Depth – Standard 4698 mm 15 ft 5 in Dig Depth – Extended 5951 mm 19 ft 6in 430E/ 430E IT Backhoe Loader
32
Embed
Specalog for 430E/430E IT Backhoe Loader, … E Backhoe Loader.pdf430E/430E IT Backhoe Loader Caterpillar ... grade and load conditions. Manual mode gives full gear selection for operation
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
®®
EngineEngine Model 3054C DITGross Power – SAE J1995 75 kW 101 hpNet Power – SAE J1349 72 kW 97 hp
WeightsOperating Weight – Nominal 7294 kg 16,066 lbOperating Weight – Maximum 10 700 kg 23,568 lb
BackhoeDig Depth – Standard 4698 mm 15 ft 5 inDig Depth – Extended 5951 mm 19 ft 6in
430E/430E ITBackhoe Loader
2
430E/430E IT Backhoe LoaderCaterpillar® Backhoe Loaders set the industry standard for operator comfort, exceptionalperformance, versatility and jobsite efficiency.
With standard pilot-operated joystick controls,a more comfortable operator station, newextendible stick design and increasedperformance, the 430E/430E IT lets you get more done with less effort.
AccuGrade® Reference Systemsfor Backhoe Loaders
Caterpillar is revolutionizingexcavation with new technology solutions.The AccuGrade Reference Systems forBackhoe Loaders are entry-level gradeand depth check systems that provideaccuracy, productivity, lower operatingcosts and enhanced profitability. pg. 14
✔
Work Tools
A new hydraulic thumb is part of thewide range of Cat® Work Tools that areavailable to meet the needs of your jobsiteapplications. All machines are equippedwith thumb mounting brackets. pg. 12
Hydraulics
Caterpillar’s state-of-the-art closed-centerhydraulic system, variable displacementpiston pump and load-sensing hydraulicsimprove implement response and speedwhile still providing high forces at anyengine speed. New flow-sharing hydraulicvalves improve multi-functionperformance. pg. 7
✔
Pilot Operated Joystick Controls
Standard pilot operated joystick controlsare easy to use, reduce operator fatigue andincrease efficiency. Auxiliary backhoehydraulic functions are operated withconvenient thumb roller controls. pg. 6
✔
Operator Station
The all-new operator station maximizesoperator comfort and productivity. Easy to use machine controls keepoperator fatigue low and production up throughout the workday. pg. 4
✔
✔ New Feature
3
Serviceability and Customer Support
Easier maintenance results in greatermachine uptime and lower owning andoperating costs. New tilt-up hood provideseasier access to the engine compartment.Your Cat dealer offers a wide range of services that can be set up under aCustomer Support Agreement. pg. 16
Additional Features
Features such as Product Link,combined function hydraulics, stackablecounterweights, new stabilizer pads andnew work lights increase productivityand versatility. pg. 15
✔
Backhoe and Loader Features
New extendible stick is designed forbest-in-class performance and diggingforces. New wear pad design providesincreased life and improved serviceability.Single-tilt or integrated toolcarrierloaders offer solid performance andmaximum versatility. pg. 10
✔
Ride Control
Optional Caterpillar® Ride Controlprovides a comfortable ride at all speeds,both on the jobsite and on the highway.System is designed to provide animproved ride whether the bucket is full or empty. pg. 9
Power Train
The Cat® 3054C DIT engine meets allU.S. EPA Tier 2/EU Stage II emissionsrequirements. The efficient fuel systemdelivers reliable engine lug performance.The transmission and new Cat axlesprovide increased roading speed. pg. 8
✔
4
430E IT Deluxe Cab
The all-new operator station provides maximum comfort and ease of operation.
Operator Station
Operator Comfort. The all-new operatorstation has been designed to maximizeoperator comfort and productivity. Pilot operated controls allow for more legroom and a spacious work environment.
New Styling. The new ergonomic,automotive styling of the operatorstation enhances the operatorenvironment. The narrow front dashprovides excellent visibility to the frontbucket. Integrated storage areas andcupholders are designed for operatorconvenience.
ROPS Canopy. Features of the ROPScanopy include:
• Air suspension vinyl seat
• Tilt steering wheel
• Two 12-volt internal power supplyadapters
• 12-volt external power supply adapter
• Phone clip
• Lockable, left side storagecompartment
• Drink holders
• Floor mat
• Eight working lights
• Rotating vandal guard
ROPS Canopy Plus. Includes all of thefeatures of the ROPS canopy with theaddition of the following:
• Front windshield
• Wiper/washer system
Standard Cab. The standard cab featuresinclude:
• Air suspension fabric seat
• Tilt steering wheel
• Two 12-volt internal power supplyadapters
• 12-volt external power supply adapter
• Phone clip
• Lockable, left side storagecompartment
• Drink holders
• Floor mat
• Eight working lights
• Two doors
• Front and rear windshield
• Wiper/washer system
• Radio-ready
Deluxe Cab. The deluxe cab includes allof the features of the standard cab plus:
• Deluxe, nine-way adjustable airsuspension seat
• Individual auto-up feature on thestabilizer controls
• System indicators for hydraulic filterservice and hydraulic temperaturewarning
Deluxe Cab with Air Conditioning.Includes all of the features of the deluxecab with the addition of air conditioning.
New Gauge Cluster. Operators can easilyview system information on the newgauge cluster. Gauges are easy to readdisplays against a white background forgood visibility in different light conditions.
Air Suspension Seat. The standard airsuspension seat utilizes an air adjustmentmechanism for a greater operating rangeand more comfortable ride. A switch onthe side control allows the seat to betailored to support differing body weights.Adjustable seat height accommodatesall operators.
The deluxe cab air suspension seat alsohas an adjustable back support, lumbarsupport, seat cushion extension, seatcushion tilt and vertical and angleadjusting armrests.
HVAC System. The improved airconditioning system features enhancedair distribution and performance for amore comfortable work environment.Large capacity fresh air filter is easilyserviced from ground level with no toolsrequired. Nearly 20% increase in air flowcombined with improved louver locationsprovide superior operator comfort.
Storage Compartment. New lockable,left side storage compartment isstandard on the 430E.
5
Joystick Controls. Standard excavator-style joysticks provide smooth modulationand are ergonomically designed for loweffort control and operator comfort.They also provide increased legroomand greater rearward viewing area.
Pilot Operated Stabilizer Controls.Stabilizer controls are within easy reach of the operator when operatingthe backhoe and provide low effort and fine modulation control.
Pilot Control Pods. Located on the leftand right sides, the controls can movefore and aft and can be operated in eitherposition for maximum comfort.
Joystick Roller Switches. Thumb rollerson the joystick provide convenient,fingertip control of auxiliary functionsfor features such as the extendible stick,hammers and augers. Roller switcheseliminate the need for foot pedals,providing additional foot room for the operator.
Pattern Selector Switch. The patternselector switch, located in the cab, allowsthe operator to change from excavatorcontrol pattern to backhoe loader controlpattern simply by pressing a button.
6
Pilot Operated Joystick ControlsLow effort, comfortable controls reduce fatigue and provide more legroom.
Hydraulic Pump. The variabledisplacement piston pump improvesimplement response and speed while stillproviding high forces at any engine speed.
Torque Limiter Control. The pump torquelimiter control manages distribution ofengine power to the hydraulic systemand drive train. E-Series improvementsproduce more aggressive backhoe diggingand stronger truck loading performance.
Flow-Sharing Hydraulic Valves.New flow-sharing hydraulic valvesautomatically distribute flow to optimizemulti-function implement performance.Closed-center implement valves signalhydraulic system requirements to acontrol valve located on the pump.
Clamps and Bushings. Metal clampswith rubber bushings are used at hoseattachment points to eliminate metal-to-metal contact and increase wear life.
Cat XT-3 ES ToughGuard™ Hoses.Improved bend radius and abrasionresistance provide reliable long life inthe toughest conditions. Made of fouroverlapping, insulated wire spiralwraps bonded together for durability,Cat XT-3 ES (Enhanced Spiral)ToughGuard hoses exceed SAEcertification standards. The hose routingprotects them from work damage, andhose failure is substantially reduced.Cat XT-3 ES ToughGuard hosescombined with Cat couplings and O-ringface seal fittings provide a leak-freesystem. All backhoe hydraulic circuitsutilize the new ToughGuard hose withextended wear characteristics.
7
HydraulicsCaterpillar sets the standard in power and precision with load-sensing hydraulics.
3054C DIT Diesel Engine. The 3054C DIT(Direct Injection Turbocharged) enginemeets all U.S. EPA Tier 2/EU Stage IIemissions requirements. It delivers highhorsepower, increased torque rise andreliable power with low emissions. It provides excellent fuel economy and system durability.
Direct Injection Fuel System. Individualunit fuel injectors deliver efficient andaccurate fuel metering and reducedemissions. The water separator serviceindicator ensures the operator is alertedwhen service is necessary.
Enhanced Roading Speed. Maximumroading speed has been increased to 40 kph (25 mph) for faster travelbetween jobsites.
Air Cleaner. A dry-type perimeter sealair cleaner with automatic, integrateddust ejection system provides moreefficient pre-separation. The two-stageair filter incorporates both air cleanerand precleaner functions into a single unit mounted under the hood.
New Cat Rear Axles. New heavy-dutyrear axles are designed specifically fordemanding backhoe loader applications.Features include outboard planetarygear sets for serviceability and brakedesign improvements for longer life.
Torque Converter. The 430E features anew larger torque converter to match itshigher horsepower. This delivers higherrimpull which is especially important intruck loading and stockpile work.
Smoother Shifts. New modulatedtransmission control valves providesmoother speed and directional shifts on all transmissions.
Standard Transmission. The Caterpillarpower shuttle transmission providesfour speeds forward and reverse. Full synchromesh gears and hydraulicallyshifted forward and reverse shuttleclutches allow direction and travel speedto be changed on-the-go. A neutral startprovision prevents starting while theshuttle is engaged.
Auto-Shift Transmission. The optionalautomatic transmission matches gears withgrade and load conditions. Manual modegives full gear selection for operation asa power shift transmission. Top gear isselected with the twist grip control onthe steering column.
Transmission Kick-Down Switch/Neutralizer. Located on the loaderjoystick, the kick-down switch on auto-shift machines allows the operator todownshift through the gears to first.When this switch is depressed for more than one second, it serves as the transmission neutralizer to maintainengine and hydraulic speed when truck loading.
Four Wheel Drive (4WD). Heavy-dutyfront drive axle can be engaged at anytime by activating the switch on the frontconsole. The switch can be activatedwhile the machine is stopped or moving,with or without load. 4WD featuresoutboard planetary gear final drivesand improves mobility and loaderperformance in poor traction conditions.
Brake Mode Selector. The brake modeselector switch has three positions: twowheel drive, two wheel drive with allwheel braking and four wheel drive.Center position provides two wheeldrive for better tire life while roadingand engages the front axle when brakesare applied for improved brakingperformance.
8
Power TrainThe Cat 3054C DIT engine is built for performance, power, reliability and fuel efficiency.
Ride Control System. The optional RideControl System incorporates a nitrogenaccumulator in the loader lift circuit thatsmooths the ride in all conditions,including load and carry, highwayroading, or simply moving aroundthe jobsite.
Improved Productivity. The Ride Controloption improves material retention in theloader bucket for increased productivityand a cleaner jobsite.
Controllability. Ride Control reducesmachine loping, providing a smooth andstable ride for increased operator comfortand reduced operator fatigue.
Convenient Operation. The system iseasily engaged by a switch on the frontconsole. On Auto-shift machines, theRide Control switch has three positions,ON, OFF and AUTOMATIC. In theautomatic position, the Ride Controlengages automatically as the travel speedincreases. At low speed, the systemdisengages for loading, grading orfinishing applications.
9
Ride ControlOptional Caterpillar Ride Control delivers even greater operator comfort.
New Backhoe Design. The completelynew E-Series backhoe delivers industry-leading digging forces. Its rugged designprovides durability in the toughestapplications. Serrated edges on the stickprovide improved material clamping forclearing and demolition applications.
New Extendible Stick. The optionalextendible stick (E-stick) increasesreach and dig depth by approximately1.2 meters (4 feet). The new designdelivers increased life and easy in-field adjustment.
High Rotation Backhoe Linkage.Single pin bucket linkage contributes tobest-in-class rotation of 205 degrees forall applications, eliminating the need tochange pin positions when moving fromloading trucks to vertical wall trenching.
Backhoe Boom. The excavator-styleboom features box section fabricationwith thicker plates for optimumperformance and durability. The curveddesign provides additional clearance overobstacles while digging a trench or truckloading. The narrow boom enhances theviewing area to the bucket and trenchthroughout the entire operating range.
Backhoe Swing Casting. New swingcasting is designed to handle the highperformance of the E-Series backhoe.It features replaceable bushings fordurability and serviceability.
Thumb Mounting. Thumb mountingprovisions are standard on every CatBackhoe Loader for added machineversatility. Hydraulic thumbs areavailable factory-installed.
10
New extendible stick is designed for better performance, higher force and improved serviceability.
Backhoe and Loader Features
Extendible Stick Design
Single Tilt Loader Linkage. The standardsingle tilt loader linkage features stronglift and breakout forces for solidperformance in backfilling and truckloading applications. The machine isequipped with either a general purposeor multi-purpose pin-on bucket to meetyour specific needs.
Integrated Toolcarrier Loader Linkage.The optional integrated toolcarrier (IT)loader linkage provides higher forces, aswell as parallel lift, for efficient loadingand material handling. Integratedtoolcarriers are highly versatile and canuse a wide range of Cat Work Tools fora variety of applications. The quickcoupler allows quick connection toselected work tools on Cat IT WheelLoaders and Telehandlers. Mechanicalwork tools can be changed in less than30 seconds from the comfort of theoperator station.
Quick Disconnects. Flat face hydraulichose quick disconnect fittings with aconnect-under-pressure feature improvethe connection of hydraulic work tools.
Loader Controls. The 430E IT features astandard single lever, electro-hydraulicloader control for proportional controland fine modulation of the hydraulic worktools. A thumb roller operates auxiliaryhydraulic functions such as the multipurpose bucket.
Loader Return-to-Dig. The return-to-digsystem reduces loading cycle times bybringing the loader bucket back to the digposition with an easy pull of the lever.By the time the loader bucket is at groundlevel, the bucket is angled correctly forthe next load or cut.
11
Work Tools. Caterpillar Work Tools forbackhoe loaders extend the versatility ofthe machine. Built for performance anddurability, these tools deliver highproductivity, long service and excellent value.
Backhoe Work Tools.
• Standard Duty Bucket
• Heavy Duty Bucket
• Heavy Duty Rock Bucket
• High Capacity Bucket
• Soil Excavation Bucket
• Coral Bucket
• Ditch Cleaning Bucket
• Cold Planer
• Hydraulic Hammer
• Vibratory Plate Compactor
• Ripper
• Thumb
• Auger
Loader Work Tools.
• General Purpose Bucket
• Multi Purpose Bucket
• Side Dump Bucket
• Light Material Bucket
• Loader Forks
• Material Handling Arm
• Angle Blade
• Broom
• Rake
• Asphalt Cutter
• Bale Spear
• Snow Plow
Bucket Line. Caterpillar’s expansivebucket line includes rock and coralbuckets. The side profile has a scallopededge, similar to an excavator bucket, forexceptional fill factor characteristics andsecure clamping ability.
Standard Duty Bucket. Used in easy-to-penetrate, low-impact, moderatelyabrasive materials.
Heavy Duty Bucket. Used for a widevariety of soil conditions such as semi-rocky soil and hard bank material.
High Capacity Bucket. Same durableconstruction as the heavy duty bucketfor tough materials with longer tipradius for increased bucket capacity.Increased draft angle on the toothadapter provides greater performance.
Heavy Duty Rock Bucket. Specificallydesigned to address harsh, rockyconditions and capable of digging in granite, caliche and rocky soil.
Coral Bucket. Features highest breakoutand short tip radius for breaking up coral.
Soil Excavation Bucket. This highcapacity, heavy duty bucket optimizesdigging performance over a widespectrum of ground conditions. With anincreased tooth adapter draft angle andnew tooth tips, productivity is not onlyincreased, but tooth tips last longer inrocky conditions.
12
Choose from a wide variety of tools designed specifically for the backhoe and integratedtoolcarrier loader.
Work Tools
Tips. A variety of bucket tips are availablefrom your Cat dealer for optimumperformance in any application.
DRS 230 (Diagonal Retention System).DRS 230 with wide adapters providesmaximum strength and improved wearcharacteristics. Heavy-duty bucket teethare attached with diagonal pins ratherthan horizontal pins for easy exchange.The adapters are stronger as a result of this improved diagonal pinning andadditional wear material on the bucketteeth increases durability.
Lift Eye. An integral lifting eye is astandard feature of the bucket linkage.
Soil Excavation Bucket with Coupler
Backhoe Quick Couplers. Quick couplersallow for quick attachment of bucketsand other work tools. The E-Series highrotation pin grabber design allows bucketsto be changed without removing thebucket pins. Other manufacturers’buckets can be coupled with a pin pullercoupler, one for Case and E-Seriesbuckets or one for John Deere and E-Series buckets.
Loader Quick Coupler. The hydraulicquick coupler, standard on every ITmachine, allows for quick and easyattachment of buckets and other work tools.
Thumb. Available for both the standardand the extendible stick, thumbs increasethe versatility of the backhoe with theability to grip, grab and sort virtuallyany material.
13
Advantages. Current trenching andexcavating processes are labor intensive,dependent on manpower and instruments.Maintaining consistent grade betweengrade stakes is challenging, even forexperienced operators. The AccuGrade®
Reference Systems for Backhoe Loadersreduces labor requirements, aids operatorsin maintaining a consistent slope acrossthe worksite and reduces material cost.
Applications. The AccuGrade system isdesigned for a wide range of constructiontrenching applications. Whether excavatingaround obstacles such as pipes or gradingbanks and trenches, the AccuGradesystem ensures accurate cuts, precisegrades and faster cycle times.
Operation. The AccuGrade Site ReferenceSystem for Backhoe Loaders enables theoperator to select machine work tool andexcavate to pre-determined coordinates.The intuitive software and controls allowthe operator to set target grades. The in-cab display provides bucket position andgrade settings to ensure the operatorexcavates to those parameters. Additionalfeedback is provided through LED lightsand sound. The system consists of thefollowing components:
• Cylinder position sensors
• Swing position sensor
• In-cab display
• Inclinometer (pitch and roll sensor)
• Wiring harnesses
In-Cab Display. The AccuGrade monitorallows the operator to enter slope and digdepth parameters. The in-cab display witheasy to read grade indicator and elevationdisplay delivers all system information tothe cab for easy viewing by the operator.
Weatherproof Design. All componentsare ruggedly designed for dependableperformance in harsh environments.
Laser Reference System. The AccuGradeLaser Reference System works with lasertransmitters to accurately grade orexcavate to a site plan without the useof grade stakes. The advanced systemincludes all components of the basicsystem with the addition of the following:
• Laser receiver
• Electric mast
• Laser mast mount
• Laser wiring harnesses
• Laser transmitter and tripod(sold separately)
14
AccuGrade® Reference Systems for Backhoe LoadersAdvanced technology simplifies excavation, improves accuracy, increases efficiency and lowers production costs.
New Combined Function AuxiliaryHydraulics Lines. New backhoe auxiliarylines provide one-way or two-way flowfor work tools such as hammers, vibratorycompactors, augers and thumbs.Standard hydraulic quick disconnectsallow fast tool exchange.
Product Link. This established Caterpillartechnology uses a Global PositioningSystem (GPS) to provide machine datato both Cat dealers and end users. Data can be received by either a webbased application system or notificationby e-mail or pager. Product Link canprovide:
• Machine hours
• Location
• Machine events and diagnostics fromdata link
Stackable Counterweights.Stackable counterweights allow easyadjustment of weight distribution withouthaving to completely replace an existingcounterweight.
New Work Lights. New work lights areadjustable and better aligned for improvedlighting of the work area.
Fuel Tank. Large capacity tank locatedon the frame’s left side is lockable andincludes a replaceable, bolt-on step.
Tool and Battery Box. Lockable, hingeddoor provides easy access to battery boxwith no hand tools required. Permanentpunched hole steel tread plate on topprovides stable footing in all weatherconditions.
Flip Over Stabilizer Pads. Flip overstabilizer pads provide the ability towork in both dirt and street applications.New pads are stronger, feature a positiveanti-flip mechanism and provideincreased rubber wear life.
Fabricated Grouser Pads. Designed fordirt applications, the new fabricatedgrouser pads provide superior strengthand durability.
15
Additional FeaturesFeatures such as Product Link, combined function hydraulics, stackable counterweights, new stabilizer pads and new work lights increase productivity.
Tilt-Up Hood. The tilt-up hood provideseasy, convenient access to all enginecheck points from the left side of themachine. Fill caps are color-coded forquick identification.
Selection. Make detailed comparisonsof the machines you are consideringbefore you buy. Cat dealers can estimatecomponent life, preventative maintenanceand the true cost of lost production. You can also customize the machine thatis right for you. Go on-line anytime toreview the full range of features andoptions available using the Build andQuote applications on your dealer’swebsite or www.cat.com.
Purchase. Look at the value E-Seriesbackhoe loaders offer. Consider all theflexible financing options your Catdealer offers as well as day-to-dayoperating costs.
Operation. Improving operatingtechniques can boost your profits. Turn to your Cat dealer for the latesttraining literature and trained staff.
Maintenance. Repair option programsguarantee the cost of repairs up front.Diagnostic programs such as S•O•SSM andCoolant Sampling and Technical Analysishelp you avoid unscheduled repairs.
Replacement. Repair, rebuild or replace?Your Cat dealer can help you evaluatethe cost involved so you can make theright choice.
Product Support. You will find nearlyall parts at our dealer parts counter. Cat dealers utilize a worldwide computernetwork to find in-stock parts to minimizemachine downtime. Additionally,Caterpillar offers a line of genuineremanufactured components which can help lower repair costs.
Easy Financing. Your Cat dealer canprovide a financing package to meetyour needs.
SAFETY.CAT.COM™.
16
Serviceability and Customer SupportSimplified service and maintenance save you time and money.
17430E/430E IT Backhoe Loader specifications
Backhoe
Dig Depth – Standard 4698 mm 15 ft 5 inE-Stick Retracted 4809 mm 15 ft 9 inE-Stick Extended 5951 mm 19 ft 6 in
Reach from Swing Pivot – Standard 6049 mm 19 ft 10 inE-Stick Retracted 6154 mm 20 ft 2 inE-Stick Extended 7247 mm 23 ft 9 in
Bucket Rotation 205ºBucket Dig Force – Standard 70.7 kN 15,892 lb
Stick Dig Force – Standard 44.2 kN 9,940 lbE-Stick Retracted 43.3 kN 9,730 lbE-Stick Extended 32 kN 7,197 lb
Stick Lift @ 2440 mm (8 ft) – Standard 2718 kg 5,992 lbE-Stick Retracted 2767 kg 6,100 lbE-Stick Extended 1966 kg 4,334 lb
Loading Height – Standard 3956 mm 13 ftE-Stick Retracted 3912 mm 12 ft 10 inE-Stick Extended 4520 mm 14 ft 10 in
Loading Reach – Standard 1774 mm 5 ft 10 inE-Stick Retracted 1948 mm 6 ft 5 inE-Stick Extended 2916 mm 9 ft 7 in
Loader
Bucket Capacity – General Purpose 1 m3 1.31 yd3
Bucket Width – General Purpose 2406 mm 7 ft 11 inDump Height @ Max Angle – 2604 mm 8 ft 7 inSingle-tiltDump Height @ Max Angle – 2539 mm 8 ft 4 inIT with QCDump Reach @ Max Angle – 821 mm 2 ft 8 inSingle-tiltDump Reach @ Max Angle – 799 mm 2 ft 7 inIT with QCDig Depth – Single-tilt 106 mm 4 inDig Depth – IT with QC 147 mm 6 inLift Capacity @ Full Height – 2937 kg 6,475 lbSingle-tiltLift Capacity @ Full Height – 3162 kg 6,971 lbIT with QCBucket Breakout Force – 46.3 kN 10,401 lbSingle-tiltBucket Breakout Force – 47.5 kN 10,672 lbIT with QC
Engine
Engine Model 3054C DITGross Power – SAE J1995 75 kW 101 hpGross Power – ISO 14396 75 kW 100 hpNet Power – SAE J1349 72 kW 97 hpNet Power – ISO 9249 73 kW 98 hpNet Power – EEC 80/1269 73 kW 98 hpBore 105 mm 4.13 inStroke 127 mm 5 inDisplacement 4.4 L 268 in3
• The net power ratings apply at 2,200 rpm when tested underthe specified conditions for the specified standard.
• Net power advertised is the power available at the flywheelwhen the engine is equipped with fan, air cleaner, mufflerand alternator.
• Based on standard air conditions of 25° C (77° F) and 99 kPa(29.32 in) in dry barometer.
• Used 35° API gravity fuel having an LHV of 42,780 kJ/kg(18,390 BTU/lb) when used at 30° C (89° F) (reference a fuel density of 838.9 g/L [7.001 lb/gal]).
• No derating required up to 2286 m (7,500 ft).
• Net torque rise meets SAE J1349.
Weights
Operating Weight – Nominal 7294 kg 16,066 lbOperating Weight – Maximum 10 700 kg 23,568 lbCab, ROPS/FOPS 260 kg 573 lbAuto-Shift Transmission 38 kg 84 lbRide Control 25 kg 55 lbAir Conditioning 46 kg 101 lbFour Wheel Drive 165 kg 364 lbMP Bucket 1.0 m3 (1.3 yd3) 884 kg 1,949 lbw/Fold-Over ForkMP Bucket 1.0 m3 (1.3 yd3) 557 kg 1,228 lbw/o Fold-Over ForkLoader, IT w/QC 338 kg 745 lbExtendible Stick (no weights) 294 kg 648 lbCounterweights (Option 1) 116 kg 255 lbCounterweights (Option 2) 231 kg 510 lbCounterweights (Option 3) 488 kg 1,075 lb
• Total gross machine weight not to exceed 10 700 kg (23,568 lb).
18 430E/430E IT Backhoe Loader specifications
Operating Specifications – Backhoe
Turning Circle: outside, front wheels 8.16 m 26 ft 9 inTurning Circle: outside, 10.84 m 35 ft 7 inWidest Loading Bucket
• ISO 5010.
• 2WD, 4WD (inner wheel not braked).
Service Refills
Cooling System, A/C 15.9 L 4.2 galCooling System, High-Ambient 16.7 L 4.4 galFuel Tank 144 L 38 galEngine Oil w/Filter 7.6 L 2 galTransmission – Torque Converter, 18.5 L 4.9 gal2WD, Power ShuttleTransmission – Torque Converter, 18.5 L 4.9 gal4WD, Power ShuttleTransmission – Torque Converter, 19 L 5 gal4WD, Auto ShiftRear Axle 16.5 L 4.4 galRear Axle, Planetaries 1.7 L 0.45 galFront Axle, 4WD 7.6 L 2 galFront Axle, Planetaries 0.8 L 0.2 galHydraulic System 79 L 21 galHydraulic Tank 38 L 10 gal
Standards
Brakes SAE J/ISO 3450, ISO 3450 1996Cab – ROPS SAE J1040 May 1994/ISO 3741 1994Cab – FOPS SAE J/ISO 3449 APR98 LEVEL II and
ISO 3449:1992 LEVEL IICab – Sound ANSI/SAE J1166 Oct 98 is 82.4 dB (A)Exterior Sound SAE J88 JUN86 is 72.3 dB (A)
Hydraulic System
Circuit Type Load-sensing, closed centerPump Capacity (@ 2,200 rpm) 163 L/min 43 gal/minSystem Pressure 24 898 kPa 3,611 psiPump Type Variable-flow, axial pistonSteering Type Front wheelPower Steering Hydrostatic2WD Cylinder – Bore 65 mm 2.56 in
Stroke 120 mm 4.72 inRod Diameter 36 mm 1.42 in
4WD Cylinder – Bore 65 mm 2.56 inStroke 120 mm 4.72 inRod Diameter 36 mm 1.42 in
Brake System Inboard, oil-immersed,multiple disc
Power Train
Power-Shuttle, Forward 1st 5.9 km/h 3.7 mphForward 2nd 9.7 km/h 6 mphForward 3rd 20 km/h 12.3 mphForward 4th 43.2 km/h 26.8 mph
Power-Shuttle, Reverse 1st 5.9 km/h 3.7 mphReverse 2nd 9.7 km/h 6 mphReverse 3rd 20 km/h 12.3 mphReverse 4th 43.2 km/h 26.8 mph
Auto-Shift (opt), Forward 1st 5.8 km/h 3.6 mphForward 2nd 9.4 km/h 5.8 mphForward 3rd 19.6 km/h 12.2 mphForward 4th 27.1 km/h 16.8 mphForward 5th 41.3 km/h 25.8 mph
Auto-Shift (opt), Reverse 1st 5.8 km/h 3.6 mphReverse 2nd 12.3 km/h 7.6 mphReverse 3rd 27.1 km/h 16.8 mph
• Auto-Shift automatically shifts between second gear andhighest selected gear.
• Forward/reverse electric power shuttle is controlled by aconveniently placed, hand operated lever that providesinstant direction changes between forward and reversethrough power hydraulic clutches.
• Torque converter free-wheel clutch allows the converterstator to free-wheel during high speed, low torque conditionssuch as roading.
• Single-stage, 2.38:1 stall ratio.
• Travel speeds of two wheel drive backhoe loader at fullthrottle when equipped with 19.5 � 24 rear tires.
19430E/430E IT Backhoe Loader specifications
Engine Features
• Three-ring pistons made of lightweight, silicon/aluminumalloy for strength and maximum thermal conductivity.
• Forged chrome/molybdenum-steel crankshaft with crankshaftwith either induction hardened or nitrocarburized journals.
• Front and rear crankshaft oil seals are “lip” type Viton andPTFE designs featuring an integral dust lip.
• Heat resistant, silicone-chrome steel intake and STELLITE-faced exhaust valves provide long life.
• Cylinder block is high strength, cast iron alloy of deep skirt,monobloc design for increased strength and long life.
• Cylinder head is high strength, cast iron alloy constructionwith extra duty wall and deck thickness. Intake and exhaustports are precision cast to promote optimum gas flow.
• Direct injection fuel system provides accurate fuel delivery;remote mounted electric lift pump improves serviceability.
• Self-priming electric lift pump for improved cold startcapability and easy filter changes.
• Dry-type axial seal air cleaner with integral precleaner,automatic dust ejection system, and filter condition indicator.
• Direct electric, 12-volt starting and charging system with 880 CCA Group 31 maintenance free battery.
• Standard glow plug starting aid system for efficient coldweather starting.
• High contact ratio/gear train, peripheral fixed isolation topcover and open deck block design reduce bare engine noise.
• Higher low end torque for better engine/machine performance.
Axle Ratings
Front Axle, 2WD, Static 22 964 kg 50,582 lbDynamic 9186 kg 20,233 lb
Front Axle, 4WD, Static 22 964 kg 50,582 lbDynamic 9186 kg 20,233 lb
Rear Axle, Static 22 964 kg 50,582 lbDynamic 9186 kg 20,233 lb
• 4WD and 2WD axles are pendulum mounted and permanentlysealed and lubricated, requiring no daily maintenance. Also features double-acting steering cylinder with 52° steeringangle for increased maneuverability. Oscillation 10° eachdirection from centerline.
Brakes
Features:
• Brakes meet the following standards: SAE J1473 and ISO 3450 requirements.
• Self-adjusting, completely enclosed and sealed.
• Foot operated brake pedals can be interlocked for roading.
• Parking/secondary brakes are independent of the servicebrake system. Parking brake is mechanically applied throughan adjustable hand lever located on the right console.
Tires
Choices listed as combination of front/rear tires:
Weight (does not include teeth or forks) 444 kg/978 lb 468 kg/1,032 lb 703 kg/1,550 lb 731 kg/1,612 lb
General Purpose(1.00 m3/1.31 yd3)
Multi Purpose (1.0 m3/1.3 yd3)
Multi Purpose(1.1 m3/1.4 yd3)
General Purpose(1.15 m3/1.50 yd3)
IT Loader with Quick Coupler
(7)(8)
(9)(10)
(11)
(12)
(13)
Dimensions and performance specifications shown are for machines equipped with 12.5/80-18 SGL front tires, 19.5L-24 IT525 rear tires, ROPS canopy, stan-dard stick with 24 inch standard duty bucket, and 1.00 m3 (1.31 yd3) loader bucket and standard equipment unless otherwise specified.
24 430E/430E IT Backhoe Loader specifications
25430E/430E IT Backhoe Loader specifications
Digging depth, SAE (max) 4698 mm/15 ft 5 in 4809 mm/15 ft 9 in 5951 mm/19 ft 6 in
Digging depth, 2 ft flat bottom 4672 mm/15 ft 4 in 4783 mm/15 ft 8 in 5925 mm/19 ft 5 in
Reach from rear axle centerline at ground line 7152 mm/23 ft 6 in 7257 mm/23 ft 10 in 8350 mm/27 ft 5 in
Reach from swing pivot at ground line 6049 mm/19 ft 10 in 6154 mm/20 ft 2 in 7247 mm/23 ft 9 in
Maximum operating height 6009 mm/19 ft 9 in 6096 mm/20 ft 0 in 6990 mm/22 ft 11 in
Loading height 3956 mm/13 ft 0 in 3912 mm/12 ft 10 in 4520 mm/14 ft 10 in
Loading reach 1774 mm/5 ft 10 in 1948 mm/6 ft 5 in 2916 mm/9 ft 7 in
Swing arc 180° 180° 180°Bucket rotation 205° 205° 205°Stabilizer spread, operating position (center) 3310 mm/10 ft 10 in 3310 mm/10 ft 10 in 3310 mm/10 ft 10 in
Stabilizer spread, operating position (outside) 3770 mm/12 ft 4 in 3770 mm/12 ft 4 in 3770 mm/12 ft 4 in
Stabilizer spread, transport position 2322 mm/7 ft 7 in 2322 mm/7 ft 7 in 2322 mm/7 ft 7 in
Overall length, maximum 8948 mm/29 ft 4 in 9948 mm/32 ft 8 in 10 947 mm/35 ft 11 in
Dimensions and performance specificationsshown are for machines equipped with12.5/80-18 SGL front tires, 19.5L-24 IT525 reartires, ROPS canopy, standard stick with 24 inchstandard duty bucket, and 1.00 m3 (1.31 yd3)loader bucket and standard equipment unlessotherwise specified.
**Hydraulically limited
*Tip limited
27430E/430E IT Backhoe Loader specifications
Backhoe Lift Capacity
Lift Capacities are over-end values. Machine equipped with 4WD, OROPS, 1.00 m3 (1.31 yd3) general purpose bucket, and 116 kg (255 lb) counterweight.
Extendible stick includes 488 kg (1,075 lb) counterweight.
*Indicates lift capacity is stability limited.
KEY
A — Boom lift kg lbB — Stick lift kg lb
22
20
18
16
14
12
10
8
6
4
2
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
24 22 20 18 16 14 12 10 8 6 4 2 0 -2
7 6 5 4 3 2 1 0 -1
FEET
METERS
FEET METERS
Cat 430E Extendible Stick — Extended
A
B
1436 3,159
1481 3,258
1490 3,278
1606 3,533
1773 3,901
1895 4,169
1966 4,326*
1439 3,166
1388 3,054*
1325 2,916* 2072 4,557*
1286 2,830*
1267 2,788*
1267 2,788*
1287 2,832*
1328 2,922
1314 2,891
1306 2,873
1308 2,878
1328 2,922
1334 2,935
2284 5,024*
2710 5,962
4703 10,347*
5377 11,829*
22
20
18
16
14
12
10
8
6
4
2
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
22 20 18 16 14 12 10 8 6 4 2 0 -2
6 5 4 3 2 1 0 -1
FEET
METERS
FEET METERS
Cat 430E Extendible Stick — Retracted
A
B
1897 4,173
2062 4,536
2065 4,5432432 5,350
2705 5,951*
2660 5,852*2005 4,410*
1711 3,765* 3113 6,848*
1645 3,618*
1615 3,554*
1621 3,566*
1664 3,660*
1651 3,632
1617 3,557
1595 3,509
1598 3,516
1690 3,718
2190 4,818
4412 9,706*
5623 12,370*
1825 4,014* 2767 6,087*
22
20
18
16
14
12
10
8
6
4
2
0
-2
-4
-6
-8
-10
-12
-14
-16
-18
6
5
4
3
2
1
0
-1
-2
-3
-4
-5
22 20 18 16 14 12 10 8 6 4 2 0 -2
6 5 4 3 2 1 0 -1
FEET
METERS
FEET METERS
Cat 430E Standard Stick
A
B
2095 4,609
2325 5,115
2284 5,025*2634 5,795
2652 5,834*
2606 5,733*1997 4,394*
1715 3,772* 3092 6,802*
1652 3,634*
1625 3,576*
1632 3,591*
1675 3,686*
1763 3,879*
1879 4,134*
1861 4,094
1875 4,125
2024 4,453
2451 5,392
5179 11,393*5271 11,597*
2718 5,979*1823 4,011*
Standard EquipmentStandard equipment may vary. Consult your Caterpillar dealer for details.
Joystick controls: pilot operated, excavator-style with pattern changer
Key start/stop systemLights, working (4 front, 4 rear)Loader, self-leveling, return-to-dig and transmission
disconnect switchLunch box holderMirror, rear viewPattern changer, in cabPower receptacle, 12V, internal and externalPower steering, hydrostaticRadio installation kitRubber impact strips on radiator guardSeat belt, retractable (51 mm/2 in)Seat, air suspension, fabric or vinyl cover, with armrestService harnessStabilizer controls, pilot operatedStabilizer shoes, grouser typeStarting system, glow plugsStorage compartment, internalStop and tail lightsSwing transport lockTilt steering wheelTires, see page 19Toolbox, external, lockableTorque converterThrottles, hand and footTransmission, four speed, synchromeshTransmission neutralizer switchTransport tie-downsWarning horn, electric
Air cleanerAlarm, back-upBackhoe position foot restsBattery, maintenance-free, 880 CCABoom transport lockBrace, lift cylinderBrake, secondary parkingBrakes, hydraulically boosted, oil disc, dual pedals, interlockingBucket level indicatorCanopy, ROPS/FOPSCat cushion swing systemCoat hookCoolant/Antifreeze, extended lifeCounterweight, bumperDome light (cab only)Differential lockEngine, Cat 3054C DIT (Direct Injection Turbocharged)Engine enclosureFace seals, O-ringFan, suction and guardFast reversing shuttle, all gearsFenders, rearFilters, spin-on
Fuel, engine oil, transmission oil, water separator, hydraulic fluid
Flashing hazard/signal lightsFloor matFour wheel drive with drive shaft guardGauges
Air cleaner service, water separator service, brake on, engine coolant, hydraulic oil level sight gauge, oil pressure
Instrument panel lights
28 430E/430E IT Backhoe Loader specifications
29430E/430E IT Backhoe Loader specifications
kg lb
AccuGrade® Site Reference System 19 42for Backhoe LoadersAccuGrade Laser Reference Systemfor Backhoe Loaders 48 105Attachments, backhoe
Mechanical Quick CouplerD and E-Series buckets 75 165C-Series buckets 75 165D, E and Deere buckets 75 165D, E and Case buckets 80 176Hydraulic thumb 139-157 306-345
Materials and specifications are subject to change without notice.Featured machines in photos may include additional equipment.
See your Caterpillar dealer for available options.
CAT, CATERPILLAR, AccuGrade, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow”and the POWER EDGE trade dress, as well as corporate and product identity used herein,
are trademarks of Caterpillar and may not be used without permission.AEHQ5686-02 (12-07)Replaces AEHQ5686-01