Page 1
SPEC #422-1017
T-628(5)
Tractors, Ag Type Factory Attach.
STATE OF MINNESOTA
PRICE PAGE
(Typed Response Required)
October, 2017
Vendor Name:
Contact Person:
Street Address:
P.O. Box:
City, State, Zip
Phone #:
Toll Free #:
Fax #:
Email Address: [email protected]
Spec # Information Requested Answer
1.0 Tractor Catalog Section Price List Title: New Holland Hay Equipment
Crop Preparation
Date & I.D. of Price List 9/1/2017 U.S. NO. 17-29A
Percentage Discount to be applied to Price List 13%
1.1 Price for manuals, (service, parts, repair, and operations) NO BID
1.2 Price for set of fluid and air filters N/A
2.0 PERFORMANCE/EXTENDED WARRANTY OPTIONS
Offer performance/warranty options. Numbers starting with 2.1, 2.2, etc.
(Specify years, miles or hours extended term covers.)
2.1 ______________________________________________ NO BID
2.2 ______________________________________________ NO BID
3.0 INSTALLATION - PER HOUR 105.00$
Installation services may be requested on an "as needed" basis.
See Special Terms and Conditions
4.0 NEW EQUIPMENT RENTAL PROGRAM
If rental programs are available on the new equipment offered, with the option to
purchase, list the hourly/weekly/monthly rental rate. Indicate the percent of rental fee
paid by the purchaser that will be applied to the purchase price. See Solicitation Special
Terms & Conditions.
Hourly Rental Rate: N/A
Weekly Rental Rate: N/A
Monthly Rental Rate: N/A
Percent (%) of Rental Fee applied to purchase price: N/A
If the new rental equipment is purchased and finance
charges are applicable for the actual rental term only,
state the actual interest rate here: ________________
5.0 VENDOR OWNED RENTAL RETURN OR DEMO EQUIPMENT PROGRAM
See Special Terms and Conditions.
DEDUCT cost per Used Hour from the original Contract Price N/A
6.0 PERCENT DISCOUNT OFF LIST PRICE FOR RELATED PARTS & ACCESSORIES
See Special Terms and Conditions 0%
7.0 DELIVERY STARTING POINT - City, State, Zip Buffalo, MN 55313
Delivery price per loaded mile. $2.50
See Special Terms and Conditions - DELIVERY CHARGES (No flat rate allowed)
Trueman Welters
Seth Strehler
763-682-6141
Version of Excel used:
1600 Highway 55 East
Buffalo, MN 55313
763-682-2200
Page 2
Page 1 of 160
HAYING EQUIPMENT INDEX - CROP PREPARATION
EQUIPMENT DESCRIPTION
LATEST
REVISION
PAGE
NUMBER
Index 09/01/17 1-2
MowMax™ Three Year Factory Cutterbar Warranty Details 3
Mowers
Models HM234/235/236 Economy Disc Mower 09/01/17 4-6
Models H6730/H6740/H6750/H6830 Disc Mower 09/01/17 7-8
Tedders
ProTed™ Rotary Tedders 09/01/17 9-12
Windrow Mergers
Model H5410 Pull Behind Merger 09/01/17 13-15
Model H5420 Swing Tongue Merger 09/01/17 16-18
Model H5430 Swing Tongue Merger 09/01/17 19-21
Rakes
Models 256/258/260 Rolabar® Rake 09/01/17 22-23
Model 57 Mounted Rolabar® Rake 09/01/17 24
Model 216 Unitized Rake 09/01/17 25-26
ProRotor™ Rotary Rakes 09/01/17 27-32
ProCart™ Deluxe Carted Wheel Rakes 09/01/17 33-35
ProCart™ Premium Carted Wheel Rakes 09/01/17 36-38
DuraVee™ Standard Wheel Rake 09/01/17 39-41
DuraVee™ Deluxe Wheel Rake 09/01/17 42-45
Model H5980 Heavy-Duty Wheel Rake 09/01/17 46-48
Mower-Conditioners
Discbine® Disc Mower-Conditioners
Models H7220/H7320 Side Pull 09/01/17 49-50
Models H7230/H7330 Side Pull 09/01/17 51-53
Discbine 310 Center Pivot 09/01/17 54-55
Discbine 312 Center Pivot 09/01/17 56-57
Discbine 313 Center Pivot 09/01/17 58-61
Discbine 316 Center Pivot 09/01/17 62-65
Haybine® Sickle Mower-Conditioners
Models 472/488 Side Pull 09/01/17 66-67
Model H7150 Center Pull 09/01/17 68-69
Page 3
Page 2 of 160
HAYING EQUIPMENT INDEX - CROP PREPARATION (con't)
LATEST PAGE
EQUIPMENT DESCRIPTION REVISION NUMBER
Speedrower® Self-Propelled Windrowers
Speedrower 160 - Tier 4B 09/01/17 70-80
Speedrower 220 - Tier 4B 09/01/17 81-91
Speedrower 260 - Tier 4B 09/01/17 92-102
Self-Propelled Windrower Ballast Chart 09/01/17 103
DuraMerger 419 Windrow Merging Attachment 09/01/17 104-105
Self-Propelled Windrower Heads
Durabine™ Disc Heads
Durabine™ 416 and Durabine™ 419 09/01/17 106-110
HS Series Haybine® Sickle Auger Heads
Models HS14, HS16, and HS18 09/01/17 111-112
Draper Belt Heads
DuraSwath™ Series Draper Heads 09/01/17 113-133
MegaCutter™ Triple Disc Mower-Conditioner
MegaCutter 512 Front Mounted Disc Mower-Conditioner 09/01/17 134-137
MegaCutter 530 Rear Mounted Disc Mower-Conditioner 09/01/17 138-142
Parts Division Supplied Accessories 09/01/17 143-160
Page 4
Page 3 of 160
NEW HOLLAND extended disc cutterbar warranty is applicable for retailed units from January 1, 2016.
The extended warranty term of 24 months starts after the expiration of the 12 month base warranty.
The extended warranty covers an additional coverage of 24 months with unlimited hours.
MowMax™ Series Disc Cutterbar Extended Warranty Coverage:
MODELS: H6000 series trailed and mounted disc mower
H7000 series Discbine® disc mower-conditioners
Drive Module Assembly (Clockwise / Counter-Clockwise)
Top Cap Assembly (Clockwise / Counter-Clockwise)
Other Covered Components:
Cross-shaft & Gear Pinion Shaft & Gear Interconnecting Drive Shafts
Cross-Shaft Bearings
Shims, Washers, & Seals
Oil Slingers, Breathers
Pinion Shaft Bearings
Shims, Washers, Seals
Module Housing Spacers
Module Tie-bolt/Threaded rods
Plugs and Dipsticks
Attaching hardware
MowMax™ II Series Disc Cutterbar Extended Warranty Coverage:
MODELS: DB300 series Discbine® disc mower-conditioners
400 series Durabine™ self-propelled windrower heads
Drive Module Assembly (Clockwise / Counter-Clockwise)
Top Cap Assembly (Clockwise / Counter-Clockwise)
Other Covered Components:
Cross-shaft & Gear Pinion Shaft & Gear Interconnecting Drive Shafts
Cross-Shaft Bearings Pinion Shaft Bearings Module Housing Spacers
Shims, Washers, & Seals Shims, Washers, Seals Attaching Hardware
Oil Slingers, Breathers
Plugs and Dipsticks
Attaching hardware
0000 000 01-SEP-17
Input Power Take-Off (PTO) drive shafts for the disc cutterbar
Discs, blades/knives, blade/knife hardware, disc caps, disc scrapers, crop drums, and crop lifters
Cutterbar skid shoes (all types) and stone/rock guards
MowMax™ Three Year Factory Cutterbar Warranty Plan Details
MowMax™ and MowMax II Series Disc Cutterbar Extended Warranty Exclusions:
Page 5
-HT1L 01
MODELS HM234/235/236 ECONOMY DISC MOWERS
US PRICE LIST
-HT1L 01 0034 000 01-SEP-17 Page 4 of 160
(Port of Entry)
Standard Equipment
HM DISC MOWER SPECIFICATIONS MODEL HM235
-Cutterbar Type: Low Profile Gear- -Cutting Width 6 ft. 9 in. (2.1M)
Driven Common Sump Design -Num. Discs 5 Oval Cutting
-Cutterbar Lift: Hyd. – Single Acting -Knives per disc 2 Reversible
-Disc Rock Guard Skid Shoes Standard -Hitch Cat I/II
-Open Right-Side with Outside Drum 3-pt.-Adjustable
-Right-Side Swath Board -Flotation Inner/Outer Spring
-Two (2) Adjustable Parking Stands -Protection Mechanical Breakaway
-PTO Driveline with Overrunning Clutch -Hydraulic Req. 1 SA
-PTO Shaft Storage Support -PTO Speed 540 RPM
-3-Point Hitch Limit Chains -Tractor Req. Min. 40 PTO HP
-Operating Weight 990 lbs. (449 kg)
NOTE: Only for use with tractors having
a fully enclosed cab. MODEL HM236
-Cutting Width 7 ft. 11 in. (2.4M)
MODEL HM234 -Num. Discs 6 Oval Cutting
-Cutting Width 5 ft. 6 in. (1.7M) -Knives per Disc 2 Reversible
-Num. Discs 4 Oval Cutting -Hitch Cat II 3-Pt.-Adjustable
-Knives per Disc 2 -Reversible -Flotation Inner/Outer Spring
-Hitch Cat I/II -Protection Mechanical Breakaway
3-Pt.-Adjustable -Hydraulic Req. 1 SA
-Flotation Inner/Outer Spring -PTO Speed 540 RPM
-Protection Mechanical Breakaway -Tractor Req. Min. 50 PTO HP
-Hydraulic Req. 1 SA -Operating Weight 1,182 lbs. (536 kg)
-PTO Speed 540 RPM
-Tractor Req. Min. 35 PTO HP WARRANTY
-Operating Weight 886 lbs. (402 kg) New Holland Standard Warranty Applies
Models
COMMERCIAL MODEL WORKING WIDTH Weight Factory Data List Price
HM234 5 ft. 6 in. Cut Width 996 LB 9006085P31 $7,903.00
HM235 6 ft. 8 in. Cut Width 1,100 LB 9006792P94 $8,822.00
HM236 7 ft. 10 in. Cut Width 1,318 LB 9007623P00 $9,900.00
Page 6
-HT1L 01
MODELS HM234/235/236 ECONOMY DISC MOWERS
US PRICE LIST
-HT1L 01 0034 000 01-SEP-17 Page 5 of 160
(Port of Entry)
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_16030 INNER SWATH WHEEL KIT 717279 Inner Swath Wheel Kit 21 LB 9000234P08 $304.00
SD_47083 OPERATOR'S MANUAL
715294 French Canadian 1 LB No Charge
715309 Spanish Manual - NA 1 LB No Charge
X47083X No Additional Operators Manual No Charge
FACTORY SUPPLIED OPTIONS
WHEEL KITS
LANGUAGE KITS
Page 7
-HT1L 01
MODELS HM234/235/236 ECONOMY DISC MOWERS
US PRICE LIST
-HT1L 01 0034 000 01-SEP-17 Page 6 of 160
(Port of Entry)
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price 717279006 Inner Swath Wheel Kit 21 LB 9000234P08 $304.00
Page 8
-HT1C 01
MODEL H6730/H6740/H6750/H6830 DISC MOWER
US PRICE LIST
-HT1C 01 0034 000 01-SEP-17 Page 7 of 160
(New Holland, PA)
Standard Equipment
**All mounted mowers must be ordered MODEL H6750
in multiples of 2 due to crating** -Cutting Width 9 ft. 2 in. (2.8M)
-Num. Discs 7 Oval Discs
DISC CUTTERBAR SPECIFICATIONS -Knives per Disc 2 Reversible
-Type MowMax™ True Modular -Std. Knives 14° Smooth Edge
Disc Cutterbar -Right-End Open with Swath
-Protection ShockPRO™ Disc Drive Drum
Hubs -Hitch Category II 3-Pt.
-Rock Guard Heavy-Duty Cast Iron -Flotation Spring
-Skid Shoes Hardened Steel- -Protection Mechanical Breakaway
Replaceable -Hydraulic Req. 1 SA
-Lift Mechanism Hyd. Single Acting -PTO Speed 540 RPM
-PTO Protection Belt Drive w/
MODEL H6730 Overrunning Clutch
-Cutting Width 6 ft. 8 in. (2.0M) -Tractor Req. Min. 60 PTO HP
-Num. Discs 5 Oval Discs
-Knives per Disc 2 Reversible MODEL H6830 Pull-Type Disc Mower
-Std. Knives 14° Smooth Edge -Cutting Width 10 ft. 4 in. (3.14M)
-Right-End Open with Swath -Avg. Swath 95 in.
Drum -Num. Discs 8 Oval Discs
-Hitch Category I or II 3-Pt. -Knives per Disc 2 Reversible
-Flotation Spring -Std. Knives 14° Smooth Edge
-Protection Mechanical Breakaway -Cutting Height Mechanical
-Hydraulic Req. 1 SA -Hitch Clevis Hitch
-PTO Speed 540 RPM -Trans. Width 10 ft. 10 in.
-PTO Protection Belt Drive w/ -Flotation Spring - Vertical &
Overrunning Clutch Lateral
-Tractor Req. Min. 45 PTO HP -Chassis Tires 2 - 27 x 9.5 - 15, 6PR
-Hydraulic Req. 2 - 1 SA & 1 DA
MODEL H6740 -PTO Speed 540 RPM
-Cutting Width 7 ft. 10 in. (2.4M) -PTO Type 80° Constant Velocity
-Num. Discs 6 Oval Discs Drive
-Knives per Disc 2 Reversible -PTO Protection Slip & Overrunning
-Std. Knives 14° Smooth Edge Clutches
-Right-End Open with Swath -Tractor Req. Min. 60 PTO HP
Drum
-Hitch Category II 3-Pt. NOTE: Only for use with tractors having
-Flotation Spring a fully enclosed cab.
-Protection Mechanical Breakaway
-Hydraulic Req. 1 SA WARRANTY
-PTO Speed 540 RPM -New Holland Standard Warranty
-PTO Protection Belt Drive w/ Applies to Base
Overrunning Clutch -MowMax 3 Year, Factory Cutterbar
-Tractor Req. Min. 55 PTO HP Extended Warranty
Page 9
-HT1C 01
MODEL H6730/H6740/H6750/H6830 DISC MOWER
US PRICE LIST
-HT1C 01 0034 000 01-SEP-17 Page 8 of 160
(New Holland, PA)
Models
COMMERCIAL MODEL WORKING WIDTH Weight Factory Data List Price
H6730 6 ft. 8 in. Cut Width 1,440 LB 9008168P93 $10,609.00
H6740 7 ft. 10 in. Cut Width 1,610 LB 9009395P54 $12,202.00
H6750 9 ft. 2 in. Cut Width 1,750 LB 9010322P62 $13,406.00
H6830 10 ft. 4 in. Cut Width 3,035 LB 9016762P90 $21,770.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_50047 HIGH STUBBLE KIT 715289 High Stubble Kit 92 LB 9000472P01 $613.00
SD_H5812 RH SWATHBOARD KIT
717355 RH Swathboard Kit
(Not orderable with model H6830)
12 LB 9000113P19 $147.00
SD_47083 OPERATOR'S MANUAL
715257 French Canadian Manual - NA 1 LB No Charge
715309 Spanish Manual - NA 1 LB No Charge
FACTORY SUPPLIED OPTIONS
DISC MOWER OPTIONS
LANGUAGE KITS
Page 10
-HT2I 01
PROTED™ ROTARY TEDDERS
US PRICE LIST
-HT2I 01 0034 000 01-SEP-17 Page 9 of 160
(Port of Entry)
Standard Equipment
ProTed™ 3417 TEDDER FEATURES ProTed™ 3625 TEDDER FEATURES
ProTed 3417 rotary tedder features ProTed 3625 rotary tedder offers 50%
four large-diameter rotors offering an more productivity than four-rotor
increased width compared to the prior models. HD frame design and
model 163 rotary tedder. New HD box- enclosed ProTed rotor-gearboxes
frame design and ProTed rotor- lubricated by oil deliver reliable service
gearboxes lubricated by grease deliver year-after-year. Three position rotor
reliable service year-after-year. This angle adjustment for more uniform
drawbar trailed model folds vertically crop spreading. Border tedding angles
and automatically raises the tines for the tedder when working along field
transport. When work is resumed the edges. A transport frame supports the
tines automatically return to the machine on large tires allowing
preset adjustment without mechanical operation with smaller tractors than
adjustments. mounted tedder models.
PROTED 3417 SPECIFICATIONS PROTED 3625 SPECIFICATIONS
-Overall Width 19 ft. (5.8M) -Overall Width 25 ft. 9 in. (7.9M)
-Working Width 17 ft.1 in.(5.2M) -Working Width 24 ft. 11 in(7.6M)
-Hitch Drawbar -Hitch Drawbar
-Num. Rotors 4 -Num. Rotors 6
-Num. Tine Arms 6 -Num. Tine Arms 7
-Rotor Lubrication Grease -Rotor Lubrication Oil Bath
-Transport Width 9 ft. 6 in.(2.9M) -Transport Width 9 ft. 9 in.(2.98M)
-Transport Height 8 ft. 8 in.(2.64M) -Transport Height 13 ft. 1 in. (4M)
-Transport Length 8 ft. 6 in.(2.6M) -Transport Length 12 ft. 6 in. (3.8M)
-Transport Speed 31 MPH (50 KPH) -Transport Speed 31 MPH (50 KPH)
-Shipping weight 904 lbs.(410 KG) -Shipping Weight 2640 lbs(1190KG)
-Driveline Std. U-Joint -Driveline U-Joint & CV
-Protection Radial Pin Clutch -Protection Radial Pin Clutch
-Tires 16x6.5-8 -Rotor Support Tires 4, 16x6.5-8
STANDARD & OPTIONAL EQUIPMENT 2, 18x8.5-8
-Anti-Wrap Fenders Standard -Transport Tires 2, 10/75-15.3
-Jack & Safety Chain Standard STANDARD & OPTIONAL EQUIPMENT
-Tine Saver Clips Optional -Adj. Rotor Angle Standard
-Anti-Wrap Deflectors Optional -Border Tedding Standard
TRACTOR REQUIREMENTS -Anti-Wrap Fenders Standard
-PTO Speed 540 RPM -Jack & Safety Chain Standard
-Power Req. 20 HP (15 KW) -Transport Lighting Standard
-Hydraulic Req. 1 SA -Tine Saver Clips Optional
-Anti-Wrap Deflectors Optional
TRACTOR REQUIREMENTS
-PTO SPEED 540 RPM
-Power Req. 50 HP (37 KW)
-Hydraulic Req. 1 SA & 1 DA
-Electrical Req. 7-Pin Lighting
Page 11
-HT2I 01
PROTED™ ROTARY TEDDERS
US PRICE LIST
-HT2I 01 0034 000 01-SEP-17 Page 10 of 160
(Port of Entry)
Standard Equipment
ProTed™ 3836 TEDDER FEATURES PROTED 3836 SPECIFICATIONS
ProTed 3836 rotary tedder features -Width in Work Pos. 37 ft.2 in.(11.3M)
twice the productivity of four-rotor -Working Width 36 ft. 1 in.(11M)
models. HD frame design and -Attachment 2-Pt (Cat I & II)
ProTed rotor gearboxes deliver -Num. Rotors 8
reliable service year-after-year. Three -Num. Tine Arms 7
position angle adjustment provides -Rotor Lubrication Oil Bath
more uniform crop spreading. Border -Transport Width 9 ft. 9 in.(2.9M)
tedding angles the tedder when -Transport Height 10 ft. 9 in.(3.3M)
working along field edges. 2-Pt. semi -Transport Length 19 ft.4 in. (5.9M)
mounted trailed design allows for use -Transport Speed 31 MPH (50 KPH)
with smaller tractors than fully- -Shipping weight 3571 lbs. (1620KG)
mounted models. A transport frame -Driveline U-Joint & CV
supports the rotors on large tires. -Protection Radial Pin Clutch
-Rotor Support Tires 6, 16x6.5-8
2, 18x8.5-8
-Transport Tires 2, 10/75-15.3
STANDARD & OPTIONAL EQUIPMENT
-Adj. Rotor Angle Standard
-Border Tedding Standard
-Anti-Wrap Fenders Standard
-Transport Lighting Standard
-Tine Saver Clips Optional
-Anti-Wrap Deflectors Optional
TRACTOR REQUIREMENTS
-PTO SPEED 540 RPM
-Power Req. 60 HP (45 KW)
-Hydraulic Req. 1 SA & 1 DA
-Electrical Req. 7-Pin Lighting
WARRANTY
New Holland Standard Warranty Applies
Page 12
-HT2I 01
PROTED™ ROTARY TEDDERS
US PRICE LIST
-HT2I 01 0034 000 01-SEP-17 Page 11 of 160
(Port of Entry)
Models
COMMERCIAL MODEL Weight Factory Data List Price
PROTED 3417 1,180 LB 9007265P72 $9,436.00
PROTED 3625 3,420 LB 9019154P52 $24,876.00
PROTED 3836 4,570 LB 9029274P63 $38,019.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_H6205 TINE SAVER CLIPS
726928 Tine Saver Clips
PT3417 kit of 34
PT3525 kit of 42
PT3836 kit of 56
if MODEL is PT3417 9000170P94 $222.00
if MODEL is PT3625 9000314P16 $408.00
if MODEL is PT3836 9000415P80 $540.00
SD_H6220 DEFLECTORS
726972 Anti-Wrap Deflectors
Anti-Wrap Deflector/ Fenders, attach to the wheel columns
providing additional protection against wrapping.
PT3417 kit of 2
PT3625 kit of 4
PT3836 kit of 6
if MODEL is PT3417 9000227P92 $296.00
if MODEL is PT3625 9000362P67 $471.00
if MODEL is PT3836 9000407P33 $529.00
SD_47083 OPERATOR'S MANUAL
715294 French Canadian No Charge
715309 Spanish Manual - NA No Charge
HAYTOOL OPTIONS
RAKE OPTIONS
MANUALS
OPERATORS
Page 13
-HT2I 01
PROTED™ ROTARY TEDDERS
US PRICE LIST
-HT2I 01 0034 000 01-SEP-17 Page 12 of 160
(Port of Entry)
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price 726928036 Tine Saver Clips-24: PT3417 8 LB 9000170P94 $222.00
726928046 Tine Saver Clips-42: PT3625 15 LB 9000314P16 $408.00
726928056 Tine Saver Clips-56: PT3836 19 LB 9000415P80 $540.00
726972006 Anti-Wrap Deflectors PT3417
Attach to the wheel columns providing additional protection
against wrapping. PT3417 kit of 2 deflectors
18 LB 9000227P92 $296.00
726972016 Anti-Wrap Deflectors PT3625
Attach to the wheel columns providing additional protection
against wrapping. PT3625 kit of 4 deflectors
34 LB 9000362P67 $471.00
726972026 Anti-Wrap Deflectors PT3836
Attach to the wheel columns providing additional protection
against wrapping. PT3836 kit of 6 deflectors
55 LB 9000407P33 $529.00
Page 14
-HT2B 01
MODEL H5410 WINDROW MERGER/INVERTER
US PRICE LIST
-HT2B 01 0034 000 01-SEP-17 Page 13 of 160
(Marshfield, WI)
Standard Equipment
H5410 MERGER SPECIFICATIONS MINIMUM TRACTOR REQUIREMENTS
-Hitch Type Center - Fixed Tongue TRACTOR HYDRAULIC DRIVEN VERSION
-Attachment Clevis Hitch -Hydraulic Req. 1 DA Pickup Lift
-Transport Wheels 2, 6.70 x 15 in. 1 DA Merger Drive
-Tail Wheels 1, 6.70 x 15 in. *MIN 16 GPM @ 2000 PSI
-Transport Locks Standard -Tractor Req. Min. 70 PTO HP
-Transport Safety Chain Standard
-Transport Lighting Standard
MINIMUM TRACTOR REQUIREMENTS
PICKUP SPECIFICATIONS SELF- CONTAINED DRIVE VERSION
-Width 9 ft. -Hydraulic Req. 1 DA Pickup Lift
-Type Belt & Finger Design -Tractor Req. Min. 70 PTO HP
-Offset Center/Windrow Straddle
-Num. Belts 3-Section *** Recommended when working
-Finger Type Poly 3-Prong with tractors of limited hydraulic
-Windguard Rolling w/ Hay Guides flow/pressure & cooling capacity.***
-Gauge Wheels 2, 5.70 x 8
DEALER ASSEMBLY REQUIRED:
CROSS CONVEYOR SPECIFICATIONS Units with self-contained hydraulic drive
-Belt Type Raised Rib are shipped without the reservoir and
-Conveyor Width 14 ft. hydraulic pump installed. The hydraulic
-Conveyor Depth 42 in. reservoir is shipped dry requiring 30
-Reversing Conveyor by Quick gallons of hydraulic oil (dealer supplied).
Coupler
-Merging Delivery Right Side WARRANTY
-Inverting Delivery Left Side New Holland Standard Warranty Applies
-Anti-Wrap Hay Guards Standard
OPTIONAL EQUIPMENT
-Inversion Chute
-2 ft. Conveyor Extension
Page 15
-HT2B 01
MODEL H5410 WINDROW MERGER/INVERTER
US PRICE LIST
-HT2B 01 0034 000 01-SEP-17 Page 14 of 160
(Marshfield, WI)
Models
COMMERCIAL
MODEL
MODEL PTO Weight Factory Data List Price
H5410 H5410R 9FT- Roller
Windguard
Tractor Driven Hydraulics 3,380 LB 9019090P61 $24,793.00
H5410 H5410R 9FT- Roller
Windguard
PTO Driven Hydraulic Pump 3,380 LB 9022470P91 $29,183.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_H5401 Windrow Inverter Attachment 717753 Windrow Inverter Attachment 9000170P17 $221.00
SD_H7001 Conveyor Extension
717754 2 ft. Conveyor Extension 9000823P90 $1,070.00
SD_47083 OPERATOR'S MANUAL
715294 French Canadian 1 LB No Charge
FACTORY SUPPLIED OPTIONS
MISCELLANEOUS
LANGUAGE KITS
Page 16
-HT2B 01
MODEL H5410 WINDROW MERGER/INVERTER
US PRICE LIST
-HT2B 01 0034 000 01-SEP-17 Page 15 of 160
(Marshfield, WI)
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price 717753016 Windrow Inverter Attachment-LH 30 LB 9000170P17 $221.00
717758006 PTO Hydraulic drive kit
Self-contained hydraulic drive conversion for
pickup and cross conveyor"
275 LB 9002885P96 $3,748.00
717942016 2FT Conveyor Extension-RH Side Only
Fixed position, RH discharge only
226 LB 9000823P90 $1,070.00
Page 17
-HT2B 02
MODEL H5420 WINDROW MERGER/INVERTER
US PRICE LIST
-HT2B 02 0034 000 01-SEP-17 Page 16 of 160
(Marshfield, WI)
Standard Equipment
H5420 MERGER SPECIFICATIONS OPTIONAL EQUIPMENT
-Hitch Type Right-Pivoting Tongue -Inversion Chute
-Attachment Clevis Hitch -2 ft. Folding Conveyor Extension
-Transport Wheels 2, 9.5L x 15 in. -4 ft. Folding Conveyor Extension
-Tail Wheels 1, 6.70 x 15 in. -6 ft. Folding Conveyor Extension
-Transport Locks Standard -Cross Conveyor Shut-Off Kit
-Transport Safety Chain Standard
-Transport Lighting Standard MINIMUM TRACTOR REQUIREMENTS
TRACTOR HYDRAULIC DRIVEN VERSION
PICKUP SPECIFICATIONS -Hydraulic Req. 1 DA Pickup Lift &
-Width 9 ft. Tongue Pivot
-Type Belt & Finger Design 1 DA Merger Drive
-Offset Right Hand *MIN 16 GPM @ 2000
-Num. Belts 3-Section PSI*
-Finger Type Poly 3-Prong -Tractor Req. Min. 70 PTO HP
-Windguard Rolling w/ Hay Guides
-Gauge Wheels 2, 5.70 x 8
MINIMUM TRACTOR REQUIREMENTS
CROSS CONVEYOR SPECIFICATIONS SELF- CONTAINED DRIVE VERSION
-Belt Type Raised Rib -Hydraulic Req. 1 DA Pickup Lift &
-Conveyor Width 14 ft. Tongue Pivot
-Conveyor Depth 42 in. -Tractor Req. Min. 70 PTO HP
-Reversing Conveyor by Quick
Coupler *** Recommended when working
-Merging Delivery Right Side with tractors of limited hydraulic
-Inverting Delivery Left Side flow/pressure & cooling capacity.***
-Anti-wrap hay guards Standard
DEALER ASSEMBLY REQUIRED:
ELECTRONIC MERGER CONTROLS Units with self-contained hydraulic drive
-Tongue Swing are shipped without the reservoir and
-Pickup Raise/Lower hydraulic pump installed. The hydraulic
-Extension Raise/Lower (if Equipped) reservoir is shipped dry requiring 30
gallons of hydraulic oil (dealer supplied).
WARRANTY
New Holland Standard Warranty Applies
Page 18
-HT2B 02
MODEL H5420 WINDROW MERGER/INVERTER
US PRICE LIST
-HT2B 02 0034 000 01-SEP-17 Page 17 of 160
(Marshfield, WI)
Models
COMMERCIAL
MODEL
MODEL PTO Weight Factory Data List Price
H5420 H5420 Merger Tractor Driven Hydraulics 3,780 LB 9023833P81 $30,953.00
H5420 H5420 Merger PTO Driven Hydraulic Pump 3,150 LB 9027214P11 $35,343.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_H5401 Windrow Inverter Attachment 717753 Windrow Inverter Attachment 9000170P17 $221.00
SD_H5402 Cross Conveyor Shut Off
717757 Cross Conveyor Shut-Off Kit 9000801P57 $1,041.00
SD_H7001 Conveyor Extension
717754 2 ft. Conveyor Extension 9003028P41 $3,933.00
717755 4 ft. Conveyor Extension 9003404P17 $4,421.00
717756 6 ft. Conveyor Extension 9003796P10 $4,930.00
SD_47083 OPERATOR'S MANUAL
715294 French Canadian 1 LB No Charge
MISCELLANEOUS
LANGUAGE KITS
Page 19
-HT2B 02
MODEL H5420 WINDROW MERGER/INVERTER
US PRICE LIST
-HT2B 02 0034 000 01-SEP-17 Page 18 of 160
(Marshfield, WI)
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price 717753016 Windrow Inverter Attachment-LH 30 LB 9000170P17 $221.00
717939006 Cross Conveyor Shut-Off Kit
Allows cross conveyor to be shut off while pickup
continues to operate
15 LB 9000801P57 $1,041.00
717940006 6FT Conveyor Extension-RH Side Only
Hydraulic folding, RH discharge only (includes
extension shut-off)
381 LB 9003796P10 $4,930.00
717941006 4FT Conveyor Extension-RH Side Only
Hydraulic folding, RH discharge only (includes
extension shut-off)
336 LB 9003404P17 $4,421.00
717942006 2FT Conveyor Extension-RH Side Only
Hydraulic folding, RH discharge only (includes
extension shut-off)
291 LB 9003028P41 $3,933.00
Page 20
-HT2B 03
MODEL H5430 WINDROW MERGER/INVERTER
US PRICE LIST
-HT2B 03 0034 000 01-SEP-17 Page 19 of 160
(Marshfield, WI)
Standard Equipment
H5430 MERGER SPECIFICATIONS OPTIONAL EQUIPMENT
-Hitch Type Right-Pivoting Tongue -Inversion Chute
-Attachment Clevis Hitch -2 ft. Folding Conveyor Extension
-Transport Wheels 2, 9.5L x 15 in. -4 ft. Folding Conveyor Extension
-Tail Wheels 1, 6.70 x 15 in. -6 ft. Folding Conveyor Extension
-Transport Locks Standard -Cross Conveyor Shut-Off Kit
-Transport Safety Chain Standard
-Transport Lighting Standard MINIMUM TRACTOR REQUIREMENTS
TRACTOR HYDRAULIC DRIVEN VERSION
PICKUP SPECIFICATIONS -Hydraulic Req. 1 DA Pickup Lift &
-Width 12 ft. Tongue Pivot
-Type Belt & Finger Design 1 DA Merger Drive
-Offset Right Hand *MIN 16 GPM @ 2000
-Num. Belts 4-Section PSI*
-Finger Type Poly 3-Prong -Tractor Req. Min. 70 PTO HP
-Windguard Rolling w/ Hay Guides
-Gauge Wheels 2, 5.70 x 8
MINIMUM TRACTOR REQUIREMENTS
CROSS CONVEYOR SPECIFICATIONS SELF- CONTAINED DRIVE VERSION
-Belt Type Raised Rib -Hydraulic Req. 1 DA Pickup Lift &
-Conveyor Width 14 ft. Tongue Pivot
-Conveyor Depth 42 in. -Tractor Req. Min. 70 PTO HP
-Reversing Conveyor By Quick
Coupler *** Recommended when working
-Merging Delivery Right Side with tractors of limited hydraulic
-Inverting Delivery Left Side flow/pressure & cooling capacity.***
-Anti-Wrap Hay Guards Standard
DEALER ASSEMBLY REQUIRED:
ELECTRONIC MERGER CONTROLS Units with self-contained hydraulic drive
-Tongue Swing are shipped without the reservoir and
-Pickup Raise/Lower hydraulic pump installed. The hydraulic
-Extension Raise/Lower (if Equipped) reservoir is shipped dry requiring 30
gallons of hydraulic oil (dealer supplied).
WARRANTY
New Holland Standard Warranty Applies
Page 21
-HT2B 03
MODEL H5430 WINDROW MERGER/INVERTER
US PRICE LIST
-HT2B 03 0034 000 01-SEP-17 Page 20 of 160
(Marshfield, WI)
Models
COMMERCIAL
MODEL
MODEL PTO Weight Factory Data List Price
H5430 H5430 Merger Tractor Driven Hydraulics 4,320 LB 9027797P77 $36,101.00
H5430 H5430 Merger PTO Driven Hydraulic Pump 4,320 LB 9031178P07 $40,491.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_H5401 Windrow Inverter Attachment 717753 Windrow Inverter Attachment 9000170P17 $221.00
SD_H5402 Cross Conveyor Shut Off
717757 Cross Conveyor Shut-Off Kit 9000801P57 $1,041.00
SD_H7001 Conveyor Extension
717754 2 ft. Conveyor Extension 9003028P41 $3,933.00
717755 4 ft. Conveyor Extension 9003404P17 $4,421.00
717756 6 ft. Conveyor Extension 9003796P10 $4,930.00
SD_47083 OPERATOR'S MANUAL
715294 French Canadian 1 LB No Charge
MISCELLANEOUS
LANGUAGE KITS
Page 22
-HT2B 03
MODEL H5430 WINDROW MERGER/INVERTER
US PRICE LIST
-HT2B 03 0034 000 01-SEP-17 Page 21 of 160
(Marshfield, WI)
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price 717753016 Windrow Inverter Attachment-LH 30 LB 9000170P17 $221.00
717939006 Cross Conveyor Shut-Off Kit
Allows cross conveyor to be shut off while pickup
continues to operate
15 LB 9000801P57 $1,041.00
717940006 6FT Conveyor Extension-RH Side Only
Hydraulic folding, RH discharge only (includes
extension shut-off)
381 LB 9003796P10 $4,930.00
717941006 4FT Conveyor Extension-RH Side Only
Hydraulic folding, RH discharge only (includes
extension shut-off)
336 LB 9003404P17 $4,421.00
717942006 2FT Conveyor Extension-RH Side Only
Hydraulic folding, RH discharge only (includes
extension shut-off)
291 LB 9003028P41 $3,933.00
Page 23
-HT2O 01
MODELS 256, 258 AND 260 RAKES
US PRICE LIST
-HT2O 01 0034 000 01-SEP-17 Page 22 of 160
(New Holland, PA)
Standard Equipment
Model 256 SPECIFICATIONS Model 258 & 260 SPECIFICATIONS
-Raking Width 8 ft. 6 in. -Raking Width 9 ft. 6 in.
-Delivey Left Side -258 Delivery Left Side
-Num. Tines 90 -260 Delivery Right Side
-Tines Spring or Rubber -Num. Tines 100
-Num. Tine Bars 5 -Tines Spring or Rubber
-Tine Bar Bearings Sealed Ball -Num. Tine Bars 5
-Basket Angle Manual Adjustable -Tine Bar Bearings Sealed Ball Bearings
-Basket Height Manual Adjustable -Basket Angle Manual, Adjustable
-Basket Suspension Spring -Basket Height Manual, Adjustable
-Basket Lubrication 100 Acre -Basket Suspension Spring
-Attachment Clevis Hitch -Basket Lubrication 100 Acre
-Parking Stand Jack -Attachment Clevis Hitch
-Ground Drive Mechanical Ground -Parking Stand Jack
Driven with lock-out -Ground Drive Mechanical Ground
-Tires 2, 5.0 x 15 4 PR (I3) Driven with Lock-Out
-Trans. Safety Chain Standard -Hydraulic Drive 1 DA Remote Req.
(9GPM @ 2000 PSI)
OPTIONAL -Tires 2, 5.0 x 15 4 PR (I3)
-Hitch & Dolly Wheel Kit -Trans. Safety Chain Standard
-Wheel Tire Kit 2, 27 x 9.5-15 4 PR
OPTIONAL
WARRANTY -Hitch & Dolly Wheel Kit
New Holland Standard Warranty Applies -Wheel Tire Kit 2, 27 x 9.5-15 4 PR
WARRANTY
New Holland Standard Warranty Applies
Models
COMMERCIAL MODEL TINE Weight Factory Data List Price
256 RAKE BTO STEEL 840 LB 9005829P67 $7,571.00
256 RAKE BTO RUBBER 840 LB 9006220P06 $8,078.00
258 RAKE BTO STEEL 840 LB 9006748P28 $8,764.00
258 RAKE BTO RUBBER 1,115 LB 9007182P56 $9,328.00
258 RAKE BTO HYD RUBBER 1,115 LB 9007325P01 $9,513.00
260 RAKE BTO RUBBER 1,095 LB 9008018P01 $10,413.00
260 RAKE BTO HYD RUBBER 1,095 LB 9008178P17 $10,621.00
Page 24
-HT2O 01
MODELS 256, 258 AND 260 RAKES
US PRICE LIST
-HT2O 01 0034 000 01-SEP-17 Page 23 of 160
(New Holland, PA)
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_41007 HITCH
439076 Dolly Wheel 15 Inch
Dolly Wheel replaces Hitch and Jack (Wheels only / Less tires)
9000472P78 $614.00
715268 Hitch and Jack Unit No Charge
SD_16066 WHEELS AND TIRES
8001509 27X9.50-15, 4 PR (G4) 9000220P99 $287.00
SD_47083 OPERATOR'S MANUAL
715294 French Canadian No Charge
715309 Spanish Manual - NA No Charge
COMPLETING PACKAGES
COMPLETING PACKAGES
HAYTOOLS TIRES AND WHEELS
TIRES AND WHEELS
FACTORY SUPPLIED OPTIONS
LANGUAGE KITS
Page 25
-HT2O 02
-HT2O 02 0034 000 01-SEP-17 Page 24 of 160
(New Holland, PA)
Standard Equipment
Model 57 SPECIFICATIONS BASKET SPECIFICATIONS
-Raking Width 8 ft. 6 in. -Num. Tines 90
-Hitch 3-Point Mounted -Tines Spring or Rubber
-PTO Speed 540 RPM -Num. Tine Bars 5
-Parking Stand Standard -Tine Bar Bearings Sealed Ball Bearings
-Gauge Wheels 2 Caster Wheels
-Gauge Wheel Type Rubber Tires
-Basket Lubrication 100 Acre
WARRANTY
New Holland Standard Warranty Applies
Models
COMMERCIAL MODEL TINE Weight Factory Data List Price
57 RAKE BTO STEEL 780 LB 9005039P65 $6,545.00
57 RAKE BTO RUBBER 780 LB 9005426P19 $7,047.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
715294 French Canadian No Charge
715309 Spanish Manual - NA No Charge
MODEL 57 MOUNTED
RAKE US PRICE LIST
Page 26
-HT1X 01
MODEL 216 UNITIZED RAKE
US PRICE LIST
-HT1X 01 0034 000 01-SEP-17 Page 25 of 160
(Milwaukee, WI)
Standard Equipment
Model 216 SPECIFICATIONS
-Max. Raking Width 27 ft. BASKET SPECIFICATIONS
-Delivery Center -Num. Baskets 2
-Hitch Adjustable Clevis -Basket Width 10 ft. 6 in.
-Trail Frame Unitized -Num. Tines 110 x 2
-Controls Tractor mounted -Tines Rubber
Control Box and One -Num. Tine Bars 5 x 2
Remote Valve -Tine Bar Bearings Sealed Ball Bearings
-Tires 2, 11L x 15 -Tine Stripper Bar Standard
-Trans. Safety Chain Standard -Basket Angle Manual,Adjustable
-Basket Height Manual,Adjustable
TRACTOR REQUIREMENTS -Basket Suspension 3-PT./Spring
-Hyd. Drive 1 DA Remote Req. -Basket Speed Adjustable
(9GPM @ 2000 PSI)
-Hyd. Functions 1 DA Remote Req. WARRANTY
-Tractor Req. Min. 50 PTO HP New Holland Standard Warranty Applies
Models
COMMERCIAL MODEL Weight Factory Data List Price
216 RAKE 2,960 LB 9025224P43 $32,759.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_16026 FRONT GAUGE WHEEL K
715281 Front Gauge Wheel Kit
For better flotation use front gauge wheel kit
100 LB 9001315P93 $1,709.00
SD_16035 REAR GAUGE WHEEL KI
715282 Rear Gauge Wheel Kit 100 LB 9001220P45 $1,585.00
FACTORY SUPPLIED OPTIONS
WHEEL KITS
Page 27
-HT1X 01
MODEL 216 UNITIZED RAKE
US PRICE LIST
-HT1X 01 0034 000 01-SEP-17 Page 26 of 160
(Milwaukee, WI)
SD_47083 OPERATOR'S MANUAL 715294 French Canadian 1 LB No Charge
LANGUAGE KITS
Page 28
-HT2F 01
PROROTOR™ ROTARY HAY RAKES
US PRICE LIST
-HT2F 01 0034 000 01-SEP-17 Page 27 of 160
(Port of Entry)
Standard Equipment
ProRotor™ rotary hay rakes rake ProRotor 3114 KEY SALES FEATURES
clean and help to improve forage The single-rotor ProRotor 3114 rakes
quality by improving leaf retention. individual windrows, or doubles up
Like a mechanical pitchfork each each windrow when working with a
tine lifts and carries the crop to the ten-foot mower for the most efficient
windrow. baling and harvesting possible.
Long flexible rake tines sweep through ProRotor 3114 SPECIFICATIONS
the stubble without contacting the soil -DIN* Raking Width 13 ft. 9 in. (4.2M)
reducing contaminants swept in the *Includes Maximum Windrow Width
windrow. -Rotor Diameter 11 ft. (3.3M)
-Clean Sweep 9 ft. 8 in. (2.95M)
The gentle rotary action builds an easy- -Num. Tine Arms 11
baling windrow that promotes continued -Num. Tines Per Arm 4
drying and resists blowing in high-winds. -Tine Lift Height 20 in. (50 CM)
-Windrow Delivery Left-Hand
For better leaf retention in delicate -Transport Width 6 ft. 7 in. (2.0M)
legume crops rake at a slightly higher -Transport Length 12 ft. 10 in.(3.9M)
moisture level and match PTO speed -Shipping Weight 1256 lbs (570 KG)
to crop volume. -Driveline Double CV PTO
-Protection Radial Pin Clutch
For optimum raking performance the -Tires 4, 18 x 8.5-8, PR6
minimum recommended cutting height
1-1/2 in. to 2 in. STANDARD & OPTIONAL EQUIPMENT
-Tandem Axles Standard
ProRotor KEY SALES FEATURES -Special Hitch Pin Standard
Three ProRotor Rake Models -Safety Chain Standard
-3114 Single Rotor Side Delivery -Tine Saver Kit Optional
-3223 Dual Rotor Side Delivery -Road Lights Optional
-3226 Dual Rotor Center Delivery
TRACTOR REQUIREMENTS
Gentle & Clean, Rotary Raking Action -PTO Speed 540 RPM
Oil Lubricated Sealed Rotor Gearbox -Power Req. 20 HP (15 KW)
Tangential Mounted, Curved Tine Arms -Hydraulic Req. 1 SA
Specially Formed Rake Tines
Adjustable Swath Curtain
Hydraulic Lift
Folding Guards, Removable Tine Arms
Adjustable Storage Jack
WARRANTY
New Holland Standard Warranty Applies
Page 29
-HT2F 01
PROROTOR™ ROTARY HAY RAKES
US PRICE LIST
-HT2F 01 0034 000 01-SEP-17 Page 28 of 160
(Port of Entry)
Standard Equipment
ProRotor 3223™ KEY SALES FEATURES ProRotor 3226™ KEY SALES FEATURES
The dual-rotor ProRotor 3223 can rake The dual-rotor ProRotor 3226 can rake
one large double windrow with a single two swaths up to 8' wide from a 16
pass or two individual windrows when foot windrower with just one pass
equipped when equipped with the making it ideal for large balers.
optional front swath board.
In double windrow raking mode it is ProRotor 3226 SPECIFICATIONS
possible to merge four swaths into a -DIN* Raking Width#
single large windrow ideal for pickup by Minimum 23 ft.(7.0M)
balers and forage harvesters. Maximum 25 ft.7in.(7.8M)
*Includes Windrow Width
ProRotor 3223 SPECIFICATIONS -Rotor Diameter 2x11 ft.(3.3M)
-DIN* Raking Width -Clean Sweep 2x9 ft. 8in.(2.9M)
Double Windrow 23 ft. 3 in.(7.1M) -Num. Tine Arms 11
Single Windrow 21ft. 8 in. (6.6M) -Num. Tines Per Arm 4
*Includes Maximum Windrow Width -Windrow Delivery Center
-Rotor Diameter 9 ft. 10 in. (3.0M) -Hitch Category II
-Clean Sweep 16 ft. (4.9M) -Attachment 2-Pt. Arms
-Num. Tine Arms -Max. Turn Angle 85°
Front Rotor 11 -Transport Width 9 ft.2 in.(2.8M)
Rear Rotor 12 -Transport Length 19 ft. 4 in.(5.9M)
-Num. Tines Per Arm 4 -Weight 3615 lbs (1640 KG)
-Tine Lift Height 20 in. (50 CM) -Driveline Double CV PTO
-Windrow Delivery Left-Hand -Protection Radial Pin Clutch
-Transport Width 7 ft. 3 in. (2.2M) -Rotor Undercarriage Tricycle
-Transport Length 24 ft. 3 in (7.4M) -Rotor Articulation 3D
-Weight 2976 lbs (1350 KG) -Num. Tires 6
-Driveline Double CV PTO -Undercarriage Tires 16x6.5-8 PR6
-Protection Radial Pin Clutch -Frnt Guide wheels Standard
-Tires 8,18 x 8.5-8, PR6 -Tandem Axle Pkg. Optional
-Frame Central Chassis
STANDARD & OPTIONAL EQUIPMENT -Chasis Tires 10.0/75-15.3
-Frnt/Rear Tandem Axles Standard
-Special Hitch Pin Standard STANDARD & OPTIONAL EQUIPMENT
-Safety Chain Standard -Central Swath Board Standard
-Transport Lighting Standard -Rear Wheel Steerring Standard
-Second Swathboard Standard -Transport Lighting Standard
-Tine Saver Kit Optional -Tine Saver Kit Optional
-Addtnl Support Whls Optional -Tandem Axle Optional
-Single Side Rotor Lift Optional
TRACTOR REQUIREMENTS
PTO Speed 540 RPM TRACTOR REQUIREMENTS
Power Req. 50 PTO HP(37KW) -PTO Speed 540 RPM
Hydraulic Req. 1 DA and 1 SA -Power Req. 50 PTO HP (37 KW)
-Hydraulic Req. 1 DA and 1 SA
Page 30
-HT2F 01
PROROTOR™ ROTARY HAY RAKES
US PRICE LIST
-HT2F 01 0034 000 01-SEP-17 Page 29 of 160
(Port of Entry)
Models
COMMERCIAL MODEL Weight Factory Data List Price
PROROTOR 3114 1256LBS 9007820P12 $10,156.00
PROROTOR 3223 2976LBS 9022221P43 $28,859.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_H5404 ROAD LIGHTS
717874 Road Lights
For 3114 Only
6LBS 9000428P12 $556.00
SD_H6205 TINE SAVER CLIPS
726928 Tine Saver Clips 15LBS
if MODEL is PR3114 15LBS 9000272P58 $354.00
if MODEL is PR3223 15LBS 9000619P08 $804.00
SD_H6206 ADD SUPPORT WHLS
726929 Additional Support Wheels
Provides a third set of adjustable wheels (16x6.5-8) on the front
of the rear undercarriage providing extra stability on hillsides and
improved contour following rough fields. ProRotor™ 3223 ONLY.
9000734P58 $954.00
HAYTOOL OPTIONS
RAKE OPTIONS
Page 31
-HT2F 01
PROROTOR™ ROTARY HAY RAKES
US PRICE LIST
-HT2F 01 0034 000 01-SEP-17 Page 30 of 160
(Port of Entry)
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
717874006 Road Lights Only Available on PROROTOR 3114
5 LB 9000428P12 $556.00
726928006 TINE SAVER CLIPS PR3114 5 LB 9000272P58 $354.00
726928016 TINE SAVER CLIPS PR3223 15 LB 9000619P08 $804.00
726929006 Additional support wheels 2X18.5IN 39 LB 9000734P58 $954.00
726930006 2nd Swathboard-Front Rotor
Only for ProRotor 3223
21 LB 9000595P98 $774.00
Page 32
-HT2F 02
PROROTOR™ 3226 ROTARY RAKES, CENTR DELIV
US PRICE LIST
-HT2F 02 0034 000 01-SEP-17 Page 31 of 160
(Port of Entry)
Models
COMMERCIAL MODEL Weight Factory Data List Price
PROROTOR 3226 3615LBS 9023799P16 $30,908.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_H6205 TINE SAVER CLIPS
726928 Tine Saver Clips 15LBS 9000531P30 $690.00
SD_H6208 TANDEM AXLE UNDERCARRAGE
726931 Tandem Axle Undercarrage
Recommended when raking in rolling or uneven field conditions.
30LBS 9001537P69 $1,997.00
SD_H6209 SINGLE SIDE ROTOR LIFT
727096 SS RTR LFT ELEC HYD
Required for turning previously raked windrows, allows for easier
finishing of oddly shaped fields with point rows. Electrohydraulic
joystick is supplied for control
9000732P27 $951.00
Page 33
-HT2F 02
PROROTOR™ 3226 ROTARY RAKES, CENTR DELIV
US PRICE LIST
-HT2F 02 0034 000 01-SEP-17 Page 32 of 160
(Port of Entry)
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price 726928026 TINE SAVER CLIPS PR3226 14 LB 9000531P30 $690.00
726931006 TNDM AXL F/UNDERCARRIAGE 111 LB 9001537P69 $1,997.00
727096006 Single-Side, Rotor-Lift Kit Electro HYD
ProRotor 3226 Only
3 LB 9000732P27 $951.00
Page 34
-HT2D 01
PROCART™ DELUXE CARTED WHEEL RAKES
US PRICE LIST
-HT2D 01 0034 000 01-SEP-17 Page 33 of 160
(Port of Entry)
Standard Equipment
ProCart™ high capacity, center-delivery PROCART 819 SPECIFICATIONS
carted rake in 8, 10, or 12 wheel -Num. Rake Wheels 8
versions; the 8-wheel version is -Min. Working Width 16 ft. 4 in.*
convertible to 10 raking wheels. The -Max. Working Width 18 ft.*
leading rake wheel on each beam (10 & -Min. Windrow Width 3 ft.*
12 Wheel) can be raised & locked out of -Max. Windrow Width 6 ft. 7 in.*
the work position quickly adjusting -Trans. Width 8 ft. 5 in.
raking width. -Min. Trans. Height 7 ft. 9 in.
-Hydraulic Req. 1 DA
Individual floating rake wheels are spring -Tractor Req. 30 HP
suspended to optimize ground contact
pressure. High-capacity curved rake PROCART 1022 SPECIFICATIONS
wheel arms ensure uniform crop flow. -Num. Rake Wheels 10
-Min. Working Width 19 ft.*
Vertical/flat folding provides clearance -Max. Working Width 21 ft.*
and stability when transporting. Ability -Min. Windrow Width 3 ft.*
to individually rake or turn windrows -Max. Windrow Width 6 ft., 7 in.*
with either the right or left-hand wheel -Trans. Width 8 ft. 5 in.
is standard. -Min. Trans. Height 7 ft. 9 in.
-Hydraulic Req. 1 DA
PROCART RAKE SPECIFICATIONS -Tractor Req. 30 HP
-Type "Vee"
-Delivery Center PROCART 1225 SPECIFICATIONS
-Hitch Clevis -Num. Rake Wheels 12
-Wheel Lift Hydraulic -Min. Working Width 21 ft. 8 in.*
-Folding Hyd. Vertical/Flat -Max. Working Width 24 ft. 6 in.*
-Width/Angle Control Mechanical -Min. Windrow Width 3 ft.*
-Tires 2, 205-75 x 15 -Max. Windrow Width 6 ft. 7 in.*
-Parking Stand/Jack Standard -Trans. Width 10 ft. 2 in.
-Trans. Safety Chain Standard -Min. Trans. Height 7 ft. 9 in.
-SMV & Reflectors Standard -Hydraulic Req. 1 DA
-Windrow Turning Standard -Tractor Req. 50 HP
RAKE WHEELS *Depending on crop conditions
-Diameter 55 in.
-Num. Tines 40 OPTIONAL EQUIPMENT
-Tine Diameter 7MM -Center Kicker Wheel Kit
-Wheel Mounting Individual -8 to 10 Rake Wheel Conversion Kit
-Flotation Adj. Spring Tension -Hyd. Angling Kit (Hyd. Req. 2 DA)
-Wheel Arm Pivots Nylon Bushing
-Greaseable Pivots Yes NOTE: For extreme hillside applications,
choose the ProCart series wheel rakes
WARRANTY over DuraVee series wheel rakes.
New Holland Standard Warranty Applies
**Not for sale in Quebec**
Page 35
-HT2D 01
PROCART™ DELUXE CARTED WHEEL RAKES
US PRICE LIST
-HT2D 01 0034 000 01-SEP-17 Page 34 of 160
(Port of Entry)
Models
COMMERCIAL MODEL Weight Factory Data List Price
PROCART 819 1,812 LB 9005226P76 $6,788.00
PROCART 1022 2,012 LB 9005815P04 $7,552.00
PROCART 1225 2,252 LB 9006601P98 $8,574.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_16019 CENTER KICKER WHEEL
716929 Center Kicker Wheel
Hydraulic lift and lockout
9000628P32 $816.00
SD_16064 WHEEL CONVERSION
716930 2 Wheel Conversion Kit
For converting a ProCart™ 819 to a ten wheel rake only
9000726P11 $943.00
SD_20087 HYDRAULIC FRAME ANGLING KIT
715677 Hydraulic Angling Kit
Requires a second double acting remote valve
9000977P13 $1,269.00
FACTORY SUPPLIED OPTIONS
Page 36
-HT2D 01
PROCART™ DELUXE CARTED WHEEL RAKES
US PRICE LIST
-HT2D 01 0034 000 01-SEP-17 Page 35 of 160
(Port of Entry)
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
715677046 Hyd Angling Kit 8/10 Wheel
for 8 and 10 wheel versions (requires second remote
valve)
57 LB 9000977P13 $1,269.00
715677056 Hyd Angling Kit 12 Wheel
for 12 wheel version (requires second remote
valve)
57 LB 9000977P13 $1,269.00
716929046 Center Kicker Wheel NH 105 LB 9000628P32 $816.00
716930086 8 to 10 Wheel Conversion Kit 256 LB 9000726P11 $943.00
Page 37
-HT2D 02
PROCART™ PLUS PREMIUM CARTED WHEEL RAKES
US PRICE LIST
-HT2D 02 0034 000 01-SEP-17 Page 36 of 160
(Port of Entry)
Standard Equipment
ProCart™ Plus high capacity, center- RAKE WHEELS
delivery carted rake in 12 or 14 wheel -Diameter (Std.) 55 in.
versions; the 12-wheel version is -Tine Diameter (Std.) 7MM
convertible to 14 raking wheels. The -Diameter (Opt.) 60 in.
leading rake wheel on each beam can -Tine Diameter (Opt.) 7.5MM
be raised and locked out of the work -Num. Tines 40
position quickly adjusting raking width. -Wheel Mounting Individual
-Flotation Adj. Spring
Convenient electro-hydraulic adjustment Tension
of working width & rake arm angle to -Wheel Arm Pivots Nylon Bushing
easily change windrow width and crop -Rake Wheel Pivots Tapered Roller
volume from the seat of the tractor. (Greaseable)
Standard walking tandem axles provide PROCART 1225 PLUS SPECIFICATIONS
increased stability and allow the rake -Num. Rake Wheels 12
wheels to ride more smoothly over -Min. Working Width 22 ft.*
uneven ground. -Max. Working Width 25 ft., 1 in.*
-Min. Windrow Width 3 ft.*
Individual floating rake wheels are spring -Max. Windrow Width 6 ft., 7 in.*
suspended to optimize ground contact -Trans. Width 9 ft. 2 in.
pressure. High-capacity curved rake -Min. Trans. Height 9 ft. 2 in.
wheel arms ensure uniform crop flow. -Hydraulic Req. 2 DA
-Tractor Req. 50 HP
Vertical/flat folding provides clearance
and stability when transporting. Ability PROCART 1428 PLUS SPECIFICATIONS
to individually rake or turn windrows -Num. Rake Wheels 14
with either the right or left-hand wheel -Min. Working Width 24 ft. 11 in.*
is standard. -Max. Working Width 28 ft.*
-Min. Windrow Width 3 ft.*
PROCART RAKE SPECIFICATIONS -Max. Windrow Width 6 ft. 7 in.*
-Type "Vee" -Trans. Width 9 ft. 2 in.
-Delivery Center -Min. Trans. Height 9 ft. 2 in.
-Hitch Clevis -Hydraulic Req. 2 DA
-Wheel Lift Hydraulic -Tractor Req. 60 HP
-Folding Hyd. Vertical/Flat *Depending on crop conditions
-Width/Angle Control Electro-Hydraulic
-Tires 4, 205/75x15 in. OPTIONAL EQUIPMENT
-Parking Stand/Jack Standard -60” Rake Wheels w/ 7.5MM Diameter
-Trans. Safety Chain Standard Tines
-SMV & Reflectors Standard -Center Kicker Wheel Kit
-Windrow Turning Standard -12 to 14 Rake Wheel Conversion Kit
-2-5/16” Ball Hitch Coupler (Svc. Parts)
WARRANTY NOTE: For extreme hillside applications,
New Holland Standard Warranty Applies choose the ProCart Plus series wheel
**Not for sale in Quebec** rakes over DuraVee series wheel rakes.
Page 38
-HT2D 02
PROCART™ PLUS PREMIUM CARTED WHEEL RAKES
US PRICE LIST
-HT2D 02 0034 000 01-SEP-17 Page 37 of 160
(Port of Entry)
Models
COMMERCIAL MODEL Weight Factory Data List Price
PROCART 1225 PLUS 2,855 LB 9008510P04 $11,052.00
PROCART 1428 PLUS 3,240 LB 9009180P71 $11,923.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_16019 CENTER KICKER WHEEL
716929 Center Kicker Wheel
Hydraulic lift and lockout
9000628P32 $816.00
SD_H6222 RAKING WHEELS
727141 Wheel Package 55 in. Wheels No Charge
727142 60 in. Rake Wheel Upgrade
Upgrade to 60 inch raking wheels for 12 and 14 wheel machines.
7.5mm thick tines. 60 inch raking wheels replace standard 55 inch
raking wheels.
if WHEEL RAKE is 12WR HD 9000233P31 $303.00
if WHEEL RAKE is 14WR HD 9000272P58 $354.00
Page 39
-HT2D 02
PROCART™ PLUS PREMIUM CARTED WHEEL RAKES
US PRICE LIST
-HT2D 02 0034 000 01-SEP-17 Page 38 of 160
(Port of Entry)
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price 439250006 12- TO 14- WHL CONV KIT - 55IN 263 LB 9001082P62 $1,406.00
439251006 12- TO 14-WHL CONV. KIT- 60IN 280 LB 9001211P98 $1,574.00
716929106 CENTER KICKER WHEEL 117 LB 9000628P32 $816.00
Page 40
-HT2Q 01
DURAVEE™ SERIES STANDARD WHEEL RAKES
US PRICE LIST
-HT2Q 01 0034 000 01-SEP-17 Page 39 of 160
Standard Equipment
DURAVEE™ RAKE SPECIFICATIONS
-Type "VEE" DURAVEE 817 SPECIFICATIONS
-Delivery Center -Num. Rake Wheels 8
-Wheel Lift Hyd. - Rack Lift -Max. Working Width 17 ft. 5 in.
-Folding Hyd.- Front Folding -Trans. Width 8 ft. 3 in.
-Width Control Hyd. – Pilot Valve -Overall Length 21 ft. 7 in.
-Windrow Control Mechanical -Tractor Req. 30 HP
-Hydraulic Req. 1 SA and 1 DA
CHASSIS SPECIFICATIONS
-Num. Tires 4 DURAVEE 1020 SPECIFICATIONS:
-Caster Brakes Adj.Friction Disc -Num. Raking Wheels 10
-Tire Size 205-75 x 15 -Max. Working Width 20 ft. 4 in.
-Trans. Safety Chain Standard -Tran. Width 8 ft. 3 in.
-Overall Length 21 ft. 7 in.
RAKE WHEEL SPECIFICATIONS -Tractor Req. 30 HP
-Diameter 55 in. -Hydraulic Req. 1 SA and 1 DA
-Num. Tines 40
-Tine Diameter 7MM OPTIONAL EQUIPMENT
-Wheel Mounting Individual -Road Lighting Kit
-Flotation Adj. Springs -Single Side Opening Kit
-Wheel Arm Pivots Nylon Bushing -8 to 10 Wheel Conversion Kit
-Greaseable Pivots Yes -Center Kicker Rake Wheel Kit
NOTE: For extreme hillside applications WARRANTY
choose the ProCart series wheel rakes. New Holland Standard Warranty Applies
Models
COMMERCIAL MODEL Weight Factory Data List Price
DURAVEE 817 2,750 LB 9008282P89 $10,757.00
DURAVEE 1020 2,750 LB 9008926P61 $11,593.00
Page 41
-HT2Q 01
DURAVEE™ SERIES STANDARD WHEEL RAKES
US PRICE LIST
-HT2Q 01 0034 000 01-SEP-17 Page 40 of 160
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_16019 CENTER KICKER WHEEL
716929 Center Kicker Wheel
Ensures that crop aligned with windrow opening is moved
left or right prior to the windrow being formed,
to facilitate drying.
256 9000927P85 $1,205.00
SD_16064 WHEEL CONVERSION
716930 2 Wheel Conversion Kit
Allows field conversion of an 8-wheel rake to a 10-wheel rake.
Also allows field conversion of an 18-wheel rake to a 20-wheel
rake.
430 9001021P02 $1,326.00
SD_H5813 SINGLE SIDE OPENING
716932 Single Side Opening
Hydraulic conversion kit allows either side of the rake to
be opened individually.
18 9000612P92 $796.00
SD_06032 LIGHTS-LIGHT KIT
715123 Light Kit
Road Lighting Kit
9000462P00 $600.00
SD_47083 OPERATOR'S MANUAL
715294 French Canadian No Charge
HAYTOOL OPTIONS
WHEEL KITS
HYDRAULIC KITS
LIGHT KIT
LANGUAGE KITS
Page 42
-HT2Q 01
DURAVEE™ SERIES STANDARD WHEEL RAKES
US PRICE LIST
-HT2Q 01 0034 000 01-SEP-17 Page 41 of 160
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
716929006 Center Kicker Wheel
DuraVee™ 817 & 1020 Only
243 LB 9000927P85 $1,205.00
716930006 Wheel Conversion DuraVee™ 817 (8-Wheel) conversion to 1020 (10-Wheel)
287 LB 9001021P02 $1,326.00
716932016 Single Side Opening DuraVee™ 817, 1020, 1833, 2026 ONLY
18 LB 9000612P92 $796.00
715123026 Road Lighting Kit 7 LB 9000462P00 $600.00
Page 43
-HT2Q 02
DURAVEE™ SERIES DELUXE WHEEL RAKE
US PRICE LIST
-HT2Q 02 0034 000 01-SEP-17 Page 42 of 160
Standard Equipment
DURAVEE™ RAKE SPECIFICATIONS DURAVEE 1631 SPECIFICATIONS
-Type "VEE" -Num. Rake Wheels 16
-Delivery Center -Max. Working Width 30 ft. 10 in.
-Wheel Lift Hyd. Rack Lift -Frame Type Rigid-Truss
-Folding Hyd. Front Folding -Transport Width 8 ft. 3 in.
-Width Control Hyd. Pilot Valve -Overall Length 30 ft.
-Windrow Control Mechanical -Num. Tires 6 - 205-75 x 15
-Hydraulic Req. 1 SA and 1 DA -Tractor Req. 40 HP
CHASSIS SPECIFICATIONS DURAVEE 1833 SPECIFICATIONS
-Num. Tires 4 or 6 -Num. Rake Wheels 18
-Caster Brakes Adj. Friction Disc -Max. Working Width 33 ft. 5 in.
-Tire Size 205-75 x 15 -Frame Type Articulated
-Trans. Safety Chain Standard -Transport Width 8 ft. 3 in.
-SMV Standard -Overall Length 37 ft. 10 in.
-Road Lighting Kit Standard -Num. Tires 6 - 205-75 x 15
-Tractor Req. 55 HP
RAKE WHEELS
-Diameter 55 in. DURAVEE 2036 SPECIFICATIONS
-Num. Tines 40 -Num. Rake Wheels 20
-Tine Diameter 7MM -Max. Working Width 36 ft.
-Wheel Mounting Individual -Frame Type Articulated
-Flotation Adj. Springs -Trans. Width 8 ft., 3 in.
-Wheel Arm Pivots Nylon Bushing -Overall Length 37 ft. 10 in.
-Greaseable Pivots Yes -Num. Tires 6 - 205-75 x 15
-Tractor Req. 55 HP
DURAVEE 1225 SPECIFICATIONS
-Num. Rake Wheels 12
-Max. Working Width 25 ft. OPTIONAL EQUIPMENT
-Frame Type Rigid -Single Side Opening Kit
-Trans. Width 8 ft. 3 in. -12 to 14 Wheel Conversion Kit
-Overall Length 24 ft. 6 in. -18 to 20 Wheel Conversion Kit
-Num. Tires 4 - 205-75 x 15 -Center Splitter Type Wheel Kit
-Tractor Req. 30 HP -Rear Tandem Axle Kit
-Hyd. Windrow Control
DURAVEE 1428 SPECIFICATIONS -3rd Wheel Kit (DV1225 Only)
-Num. Rake Wheels 14 -60 in. Rake Wheel Upgrade
-Max. Working Width 28 ft. 6 in.
-Frame Type Rigid-Truss NOTE: For extreme hillside applications
-Trans.Width 8 ft. 3 in. choose the ProCart series wheel rakes.
-Overall Length 30 ft.
-Num. Tires 6 - 205-75 x 15 WARRANTY
-Tractor Req. 40 HP New Holland Standard Warranty Applies
Page 44
-HT2Q 02
DURAVEE™ SERIES DELUXE WHEEL RAKE
US PRICE LIST
-HT2Q 02 0034 000 01-SEP-17 Page 43 of 160
Standard Equipment
Models
COMMERCIAL MODEL Weight Factory Data List Price
DURAVEE 1225 3,827 LB 9012306P91 $15,983.00
DURAVEE 1428 5,208 LB 9015999P83 $20,779.00
DURAVEE 1631 5,570 LB 9016564P24 $21,512.00
DURAVEE 1833 5,210 LB 9019288P50 $25,050.00
DURAVEE 2036 5,540 LB 9019734P33 $25,629.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_05043 CONVERSION KIT
439073 Conversion Rake Whls 55 in.
Required when 14 to 16 wheel conversion kit is ordered. For
55 inch wheels. 1 right hand and 1 left hand wheel included.
9000188P65 $245.00
439074 Conversion Rake Whls 60 in.
Required when 14 to 16 wheel conversion kit is ordered. For
60 inch wheels. 1 right hand and 1 left hand wheel included.
9000214P06 $278.00
SD_16019 CENTER KICKER WHEEL
716929 Center Kicker Wheel
Ensures that crop aligned with windrow opening is moved
left or right prior to the windrow being formed,
to facilitate drying.
256 9000927P85 $1,205.00
SD_16064 WHEEL CONVERSION
439072 CONV 14 TO 16 L/R WH
Coverts DuraVee 1428 to 16 wheels. Wheels are not
included. Must be paired with appropriate package of
55" or 60" raking wheels.
9001021P02 $1,326.00
WHEEL KITS
Page 45
-HT2Q 02
DURAVEE™ SERIES DELUXE WHEEL RAKE
US PRICE LIST
-HT2Q 02 0034 000 01-SEP-17 Page 44 of 160
716930 2 Wheel Conversion Kit
Allows field conversion of an 8-wheel rake to a 10-wheel rake.
Also allows field conversion of an 18-wheel rake to a 20-wheel
rake.
430 9001021P02 $1,326.00
SD_H6222 RAKING WHEELS
727142 60 in. Rake Wheel Upgrade
Upgrade to 60 inch raking wheels for 12 wheel, 14 wheel,
and 16 wheel machines. 7.5 mm thick tines. 60 inch raking wheels
replace standard 55 inch raking wheels.
if WHEEL RAKE is 12 Wheel Rake 9000233P31 $303.00
if WHEEL RAKE is 14 Wheel Rake 9000272P58 $354.00
if WHEEL RAKE is 16 Wheel Rake 9000311P08 $404.00
SD_16011 3RD WHEEL KIT
717638 3rd Wheel Kit
Includes caster mounts, tires, and yellow transport wheels.
Adds a caster wheel to the front of the 12-wheel rake to
improve performance in rough fields.
265 9001006P39 $1,307.00
SD_16037 REAR TANDEMS
716937 Rear Tandems
Includes walking beam axles, tires, and yellow transport
wheels. Recommended when working in rough fields,
particularly pivot irrigation.
312 9000910P91 $1,183.00
SD_20083 HYD REAR OPENING KIT
716934 Rear Hydraulic Opening Kit
Replaces mechanical rear opening ratchet adjustment.
115 9001036P42 $1,346.00
SD_H5813 SINGLE SIDE OPENING
716932 Single Side Opening
Hydraulic conversion kit allows either side of the rake to
be opened individually.
18 9000612P92 $796.00
SD_47083 OPERATOR'S MANUAL
715294 French Canadian No Charge
SUPPORT WHEELS
HYDRAULIC KITS
LANGUAGE KITS
Page 46
-HT2Q 02
DURAVEE™ SERIES DELUXE WHEEL RAKE
US PRICE LIST
-HT2Q 02 0034 000 01-SEP-17 Page 45 of 160
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
716929066 Ctr Kicker Kit - W/R. Wheels
DuraVee™ 1225, 1428, & 1631 Only
242 LB 9000927P85 $1,205.00
716929016 CENTER KICKER WHEEL DuraVee™ 1833 and 2036 Only
256 LB 9000927P85 $1,205.00
439072006 CONV KIT 14 TO 16 L/R WHLS
No wheels included. Must order 439073006 (55 in. wheels) or
439074006 (60 in. wheels) to complete.
104 LB 9001021P02 $1,326.00
439073006 Conv Kit Rake Whls 55IN
Set of two 55'' rake wheels (1-RH/1-LH) for two wheel
conversion kit
77 LB 9000188P65 $245.00
439074006 CONV KIT RAKE WHLS 60IN NH
Set of two 60'' rake wheels (1-RH/1-LH) for two wheel
conversion kit
95 LB 9000214P06 $278.00
717638026 3rd Wheel Kit
DuraVee™ 1225 ONLY, Standard on DuraVee 1428, 1631, 1833, & 2036
297 LB 9001006P39 $1,307.00
716932016 Single Side Opening DuraVee™ 817, 1020, 1833, 2026 ONLY
18 LB 9000612P92 $796.00
716932036 SINGLE SIDE OPENING DuraVee™ 1225, 1428, & 1631 ONLY
12 LB 9000612P92 $796.00
716934056 HYD REAR OPENING KIT DuraVee™ 1225 ONLY (12-wheel)
95 LB 9001036P42 $1,346.00
716934066 Hyd Rear Opening Kit DuraVee™ 1428 (14-Wheel), & 1631(16-Wheel) ONLY
104 LB 9001036P42 $1,346.00
716934026 Rear Hyd 18-20 Wheel DuraVee™ 1833 (18-Wheel) & 2026 (20-Wheel) ONLY
108 LB 9001036P42 $1,346.00
716937026 Rear Tandems DuraVee™ 1225, 1428, & 1631 ONLY
242 LB 9000910P91 $1,183.00
716937006 REAR TANDEMS DuraVee™ 1833 & 2036 ONLY
265 LB 9000910P91 $1,183.00
Page 47
-HT1Z 01
MODEL H5980 HEAVY-DUTY WHEEL RAKE
US PRICE LIST
-HT1Z 01 0034 000 01-SEP-17 Page 46 of 160
(Marshfield, WI)
Standard Equipment
New Holland H5980 heavy-duty wheel ELECTRO-HYDRAULIC CONTROLS
rake provides greater reliability and more -Independent RH/LH Rake wheel Lift
capacity than traditional wheel rakes. -Independent RH/LH Rake Frame
The offset "Y-rake" design turns all of Angle Control
the hay for more consistent drying and -Independent RH/LH Rake Width
easier pickup. Adjustment
H5980 KEY SALES FEATURES TRACTOR REQUIREMENTS
-Offset Y-rake design turns all crop -Hydraulic
eliminating need for center kicker Num. Valves 1 DA
wheel(s). Close Center Required
-Twin sliding overhead frame provides Open Center Possible
extra high-clearance to rake high -Electrical Req. 12V
volume crops without bunching. -Power Req. 65 HP
-Mechanical rake wheel tilt adjustment
up to ten degrees to produce more
fluffy and uniform windrows. H5980 (Std. 17 Rake Wheels)
-Individual and gang style raking Wheel -Max. Working Width 30 ft. 3 in.
ground pressure adjustments. -Max. Windrow Width 72 in.
-The optional front rake wheel -Transport Width 12 ft. 3 in.
extension kits adds two additional -Overall length 28 ft. 3 in.
raking wheels for a bigger reach.
-The optional rear rake wheel H5980 (w/ Opt. Rear Ext. Kit Only)
extension kit provides additional 12 in. -Max. Working Width 31 ft. 3 in.
reach and maintains rear overlap to -Max. Windrow Width 72 in.
ensure everything is turned. -Transport Width 13 ft. 3 in.
-Overall length 30 ft. 8 in.
H5980 WHEEL RAKE SPECIFICATIONS:
-Rake Wheel Dia. 60 in. H5980 (w/ Opt. Front Ext. Kit Only)
-Num. Raking wheels 17 -Max. Working Width 33 ft. 3in.
Right Side Frame - 8 Wheels -Max. Windrow Width 72 in.
Left Side Frame - 9 Wheels -Transport Width 12 ft. 3in.
-Num. Tines per wheel
-Tine Mounting
36
Rubber
-Overall Length 30 ft. 8 in.
-Tine Diameter .285 in. H5980 (w/ Opt. Front & Rear Ext. Kits)
-Poly Wind Panels Std. -Max. Working Width 34 ft. 3in.
-Tapered Roller Bearings Std. -Max. Windrow Width 72 in.
-Walking Tandem Axle Std. -Transport Width 13 ft. 3in.
-Offset Tires Std. -Overall Length 33 ft. 1 in.
-Tire Size 9.5Lx15
-Clevis Hitch Std. WARRANTY
-2 5/16 in. Ball Hitch DIA Kit New Holland Standard Warranty Applies
-Parking Jack Std.
-Power Req. 65 HP
Page 48
-HT1Z 01
MODEL H5980 HEAVY-DUTY WHEEL RAKE
US PRICE LIST
-HT1Z 01 0034 000 01-SEP-17 Page 47 of 160
(Marshfield, WI)
Models
COMMERCIAL MODEL WHEEL RAKE Weight Factory Data List Price
H5980 17 Wheel Rake 5,700 LB 9029680P42 $38,546.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_H7002 FR RAKING EXTENSIONS
439032 Front Raking Extensions
Increases the maximum working width by providing two
additional right and left raking wheels for a maximum width
of 33 ft. 3 in. or 34 ft. 3 in. when used with rear rake wheel
extension kit.
9002215P29 $2,877.00
SD_H7003 RR RAKING EXTENSIONS
439033 Rear Raking Extensions
Extends the overhead frame by 1-foot for increased width and
extends the the right-hand raking frame by one raking wheel
and to ensure all the hay is turned when raked.
9001473P78 $1,914.00
SD_47083 OPERATOR'S MANUAL
715294 French Canadian 1 LB No Charge
715309 Spanish Manual - NA 1 LB No Charge
HAYTOOL OPTIONS
RAKING EXTENSIONS
LANGUAGE KITS
Page 49
-HT1Z 01
MODEL H5980 HEAVY-DUTY WHEEL RAKE
US PRICE LIST
-HT1Z 01 0034 000 01-SEP-17 Page 48 of 160
(Marshfield, WI)
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
439034006 Front Raking Extension
Increases the maximum working width by providing two
additional right and left raking wheel for a maximum width
of 33 ft. 3 in. or 34 ft. 3 in. when used with rear rake wheel
extension kit.
Serial number YBWHR0030 through current production only.
492 LB 9002215P29 $2,877.00
439035006 Rear Raking Extension
Extends the overhead frame by 1-foot for increased width and
extends the the right-hand raking frame by one raking wheel
and to ensure all the hay is turned when raked.
Serial number: YBWHR0030 through current production only.
231 LB 9001473P78 $1,914.00
Page 50
-HT2R 01
H7220/H7320 SIDE-PULL DISCBINE® DMC
US PRICE LIST
-HT2R 01 0034 000 01-SEP-17 Page 49 of 160
(New Holland, PA)
Standard Equipment
MODEL H7220 & 7320 ROLL CONDITIONING SYSTEM (H7220)
-Hitch Clevis -Roll Design Chevron
-Head Tilt Mechanical -Roll Width 90 in.
-Head Flotation Adjustable Springs -Roll Diameter 10-3/8 in.
-Flotation Geometry Vertical & Lateral -Roll Material Rubber
-Impact Hood Liner High Density -Roll Speed 647 rpm
Polyethylene -Roll Pressure System Torsion Bar
-Tongue Swing Hydraulic -Roll Pressure Adj. Hand Crank
-Tires 2, 9.5L 14, 6PR -Roll Gap & Timing Adjustable
-Trans. Width 9 ft. 11 in.(3.0m)
-Trans. Lighting Standard FLAIL CONDITIONING SYSTEM (H7320)
-SMV Symbol Standard -Design LeaningEdge™ Flail Tines
-Safety Chain Standard -Tine Material Cast Steel
-Num. Tines 90
DISC CUTTERBAR SPECIFICATIONS -Rotor Width 90 in.
-Cutting Width 9 ft. 2 in.(2.8m) -Rotor Speed 1016 rpm
-Cutting Height .95-3.2 in.(21-81mm) (730 rpm available)
-Num. Discs 7 Oval Discs -Intensity Adjustable Hood
-Disc Speed 3000 rpm -Hood Liner Replaceable
-Crop Lifters Standard -Adjustment Hand Crank
-Knives/Disc 2 Reversible
-Std. Knives 14° Smooth Edge OPTIONAL EQUIPMENT
-Type MowMax™ Disc -Hydraulic Head Tilt Kit
Cutterbar -High Stubble Skid Shoe Kit
-Protection ShockPRO™ System -Textured Hood Liner Kit (H7320 Only
-Rock Guard Heavy-Duty Cast Iron
-Skid Shoes Hardened Steel TRACTOR REQUIREMENTS
-PTO Speed 540 RPM
SWATH SPECIFICATIONS -Power 65 PTO hp
-Width Range 3-6 ft. (.91-1.8m) -Hyd. Equipment 1 DA / 1 SA
-Windrow Shields Adjustable
-Swath Gate/Baffle Adjustable WARRANTY
-New Holland Standard Warranty
DRIVE SPECIFICATIONS Applies To Base
-Primary PTO 80° Constant -MowMax 3 Year, Factory Cutterbar
Velocity (CV) Extended Warranty
-Secondary PTO
Slip Clutch Standard
Overrunning Clutch Standard **Only for use with tractors having a
Type Non CV fully enclosed cab.**
Page 51
-HT2R 01
H7220/H7320 SIDE-PULL DISCBINE® DMC
US PRICE LIST
-HT2R 01 0034 000 01-SEP-17 Page 50 of 160
(New Holland, PA)
Models
COMMERCIAL
MODEL
CONDITIONER TYPE TONGUE Weight Factory Data List Price
H7220 BTO Rubber on rubber chevron STD TONGUE 4,340 LB 9022294P58 $28,954.00
H7320 BTO Flail Rotor Conditioner STD TONGUE 4,340 LB 9021194P25 $27,525.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_50016 HYDRAULIC TILT KIT 715264 Hydraulic Header Tilt 25 LB 9000281P05 $365.00
SD_50047 HIGH STUBBLE KIT
715289 High Stubble Kit
Cutting height with high stubble kit is 2.25" - 4.5" (58mm -
115mm). Includes 8 skid shoes.
92 LB 9000462P00 $600.00
SD_H5815 TEXTURED LINER KIT
716537 Textured Liner Kit
Orderable only with model flail units, provides more aggressive
conditioning.
84 LB 9000300P30 $390.00
SD_47083 OPERATOR'S MANUAL
715257 French Canadian Manual - NA 1 LB No Charge
715309 Spanish Manual - NA 1 LB No Charge
COMPLETING PACKAGES
COMPLETING PACKAGES
FACTORY SUPPLIED OPTIONS
MOWER CONDITIONER OPTIONS
LANGUAGE KITS
Page 52
-HT2R 02
H7230/H7330 SIDE-PULL DISCBINE® DMC
US PRICE LIST
-HT2R 02 0034 000 01-SEP-17 Page 51 of 160
(New Holland, PA)
Standard Equipment
MODEL H7230 & 7330 ROLL CONDITIONING SYSTEM (H7230)
-Standard Tongue Clevis -Roll Design Chevron
-Swivel Tongue 2-pt or Drawbar -Roll Width 102 in.
-Head Tilt Hydraulic -Roll Diameter 10-3/8 in.
-Head Flotation Adjustable Springs -Roll Material Rubber
-Flotation Geometry Vertical & Lateral -Roll Speed 635 rpm
-Impact Hood Liner High Density -Roll Pressure System Torsion Bar
Polyethylene -Roll Pressure Adj. Hand Crank
-Tongue Swing Hydraulic -Roll Gap & Timing Adjustable
-H7230 Tires 2, 11.5L 15, 6PR
-H7330 Tires 2, 9.5L 14, 6PR FLAIL CONDITIONING SYSTEM (H7330)
-Trans. Width 11 ft. 3 in.(3.4m) -Design LeaningEdge™ Flail Tines
-Trans. Lighting Standard -Tine Material Cast Steel
-SMV Symbol Standard -Num. Tines 100
-Safety Chain Standard -Rotor Width 102 in.
-Rotor Speed 1016 rpm
DISC CUTTERBAR SPECIFICATIONS (718 rpm available)
-Cutting Width 10 ft. 4 in.(3.16m) -Intensity Adjustable Hood
-Cutting Height .95-3.2 in.(21-81mm) -Hood Liner Replaceable
-Num. Discs 8 Oval Discs -Adjustment Hand Crank
-Disc Speed 3000 rpm
-Crop Lifters Standard OPTIONAL EQUIPMENT
-Knives/Disc 2 Reversible -Swivel Hitch Tow Bar Kit
-Std. Knives 14° Smooth Edge -High Stubble Skid Shoe Kit
-Type MowMax™ Disc -Textured Hood Liner Kit (H7330 Only)
Cutterbar
-Protection ShockPRO™ System STANDARD HITCH REQUIREMENTS
-Rock Guard Heavy-Duty Cast Iron -PTO Speed 540 OR 1000 RPM
-Skid Shoes Hardened Steel -Power 80 PTO hp
-Hyd. Equipment 1 DA / 1 SA
SWATH SPECIFICATIONS
-Width Range 3-7 ft. (.91-2.1m) SWIVEL HITCH REQUIREMENTS
-Windrow Shields Adjustable -PTO Speed 540 RPM
-Swath Gate/Baffle Adjustable -Power 80 PTO hp
-Hyd. Equipment 1 DA / 1 SA
DRIVE SPECIFICATIONS
-Primary PTO WARRANTY
Standard Tongue 80° Constant -New Holland Standard Warranty
Velocity (CV) Applies To Base
Swivel Tongue Std. U-Joint & -MowMax 3 Year, Factory Cutterbar
Swivel Gearbox Extended Warranty
-Secondary PTO
Slip Clutch Standard **Only for use with tractors having a
Overrunning Clutch Standard fully enclosed cab.**
Type Double CV Joint
Page 53
-HT2R 02
H7230/H7330 SIDE-PULL DISCBINE® DMC
US PRICE LIST
-HT2R 02 0034 000 01-SEP-17 Page 52 of 160
(New Holland, PA)
Models
COMMERCIAL
MODEL
CONDITIONER TYPE TONGUE Weight Factory Data List Price
H7230 BTO Rubber on rubber chevron STD TONGUE 4,340 LB 9024447P50 $31,750.00
H7230 BTO Rubber on rubber chevron SWIVEL TNG 4,340 LB 9025312P98 $32,874.00
H7230 BTO Steel on steel chevron STD TONGUE 4,340 LB 9024879P47 $32,311.00
H7230 BTO Steel on steel chevron SWIVEL TNG 4,340 LB 9025744P95 $33,435.00
H7330 BTO Flail Rotor Conditioner STD TONGUE 4,340 LB 9023211P65 $30,145.00
H7330 BTO Flail Rotor Conditioner SWIVEL TNG 4,340 LB 9024077P13 $31,269.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_41039 HITCH
717936 Drawbar Hitch
Required choice for Swivel Hitch model only. Attaches to tractor
drawbar via hitch extension. Max dimension for Swivel hitch
adapter is 3.15 inches (80mm) wide, 2.047 inches thick (52mm),
Cat. II or III drawbar.
No Charge
717937 2 Point Hitch
Required choice for Swivel hitch model only. Attaches to
tractor lower 3-point hitch links.
No Charge
SD_03005 PTO
715291 1000 RPM PTO
For Standard Tongue Units Only. Replaces Std 540 PTO
45 LB No Charge
X03005X No PTO
Price credit when neither 540 RPM nor 1000 RPM PTO are ordered
with STANDARD TONGUE unit.
(900927P08) ($1,204.00)
COMPLETING PACKAGES
COMPLETING PACKAGES
PTO OPTIONS
Page 54
-HT2R 02
H7230/H7330 SIDE-PULL DISCBINE® DMC
US PRICE LIST
-HT2R 02 0034 000 01-SEP-17 Page 53 of 160
(New Holland, PA)
SD_41033 TOW BAR
716548 Tow Bar
Allows slow-speed towing of a 2-pt. swivel hitch unit by a tractor
without 3-pt or drawbar swivel hitch unit by a tractor without
drawbar adapter. Includes safety chain.
9000628P32 $816.00
SD_50047 HIGH STUBBLE KIT
715289 High Stubble Kit
Cutting height with high stubble kit is 2.25" - 4.5" (58mm -
115mm). Includes 8 skid shoes.
92 LB 9000462P00 $600.00
SD_H5815 TEXTURED LINER KIT
716537 Textured Liner Kit
Orderable only with model flail units, provides more aggressive
conditioning.
84 LB 9000300P30 $390.00
SD_47083 OPERATOR'S MANUAL
715257 French Canadian Manual - NA 1 LB No Charge
715309 Spanish Manual - NA 1 LB No Charge
FACTORY SUPPLIED OPTIONS
MOWER CONDITIONER OPTIONS
LANGUAGE KITS
Page 55
-HT3G 01
DISCBINE 310 CENTER PIVOT DMC
US PRICE LIST
-HT3G 01 0034 000 01-SEP-17 Page 54 of 160
Standard Equipment
Discbine® 310 Disc Mower-Conditioner ROLL CONDITIONING
-Tongue Center-Pivot -Roll Design Chevron
-Hitch Swivel Gearbox -Roll Width 99 in. (2510mm)
-Attachment 2-pt (Only) -Roll Material Rubber
-Head Tilt Mechanical -Roll Drive Synchronized gears
-Head Flotation Adjustable Springs -Roll Speed 970 rpm
-Flotation Geometry Vertical-TopSafe -Roll Pressure Adj. Springs
-Tongue Swing Hydraulic -Roll Gap Adjustable
-Tires 300/55-17 Flotation -Roll Timing Adjustable
-Trans. Width 9’ 10’’ (3.0m) -Windrow Range 4-6.5ft.(1.2-2m)
-Trans. Length 22’ 9’’ (6.93m)
-Trans. Lighting Standard
-SMV Symbol Standard FLAIL TINE CONDITIONING
-Design 70 Steel Y-Flails
DISC CUTTERBAR SPECIFICATIONS -Rotor Width 99in.(2510mm)
-Cutting Width 10 ft. 4in.(3.15m) -Rotor Speed 1000 rpm
-Cutting Height 1-4 in.(24-98 mm) -Intensity Adjustable Hood
-QuickMax™ System Standard -Windrow Range 4-6.5 ft. (1.2-2m)
-Num. Discs 8 Discs / 16 Knives -Wide Swath 8.2 ft.(2.5m)
-Type Low-profile
-Protection ShockPRO™ System TRACTOR REQUIREMENTS
-Skid Shoes Full Coverage -PTO Speed RPM 1000
-PTO Yoke 1 3/8'' - 21s
SWATH SPECIFICATIONS -Min. Power 82 PTO hp (60kW)
-Roll Conditioning -Hyd. Equipment 1DA / 1 SA
-Windrow Range 4-6.5ft.(1.2-2m)
-Flail Tine Conditioning WARRANTY
-Windrow 4-6.5 ft.(1.2-2m) -New Holland Standard Warranty
-Wide Swath 8.2 ft.(2.5m) Applies
DRIVE SPECIFICATIONS **Only for use with tractors having a
-Primary Std. U-Joint & fully enclosed cab.**
Swivel Gearbox
-Secondary Std. U-Joint &
Swivel Gearbox
-Slip Cutch Standard
-Overrunning Clutch Standard
Page 56
-HT3G 01
DISCBINE 310 CENTER PIVOT DMC
US PRICE LIST
-HT3G 01 0034 000 01-SEP-17 Page 55 of 160
Models
COMMERCIAL MODEL Weight Factory Data List Price
DISCBINE 310F 9026210P80 $34,040.00
DISCBINE 310R 9027772P36 $36,068.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_47083 OPERATOR'S MANUAL
712372 French for North America No Charge
712960 Spanish Language No Charge
SD_50047 HIGH STUBBLE KIT
715289 High Stubble Kit
The high stubble skid shoe kit adds taller skid shoes that mount
directly under the standard skid shoes. The high stubble skid shoe
kit increases the maximum theoretical stubble height to
approximately 120 mm (4.7 in).
-Discbine 310 Qnt. 8 raised skid shoes
-Discbine 312 Qnt. 9 raised skid shoes
if MODEL is DB310R 9000486P64 $632.00
if MODEL is DB310S 9000486P64 $632.00
FACTORY SUPPLIED OPTIONS
Page 57
-HT3G 02
DISCBINE 312 CENTER PIVOT DMC
US PRICE LIST
-HT3G 02 0034 000 01-SEP-17 Page 56 of 160
Standard Equipment
Discbine® 312 Disc Mower-Conditioner ROLL CONDITIONING
-Tongue Center-Pivot -Roll Design Chevron
-Hitch Swivel Gearbox -Roll Width 115 in. (2920mm)
-Attachment 2-pt (Only) -Roll Material Rubber
-Head Tilt Mechanical -Roll Drive Synchronized gears
-Head Flotation Adjustable Springs -Roll Speed 970 rpm
-Flotation Geometry Vertical-TopSafe -Roll Pressure Adj. Springs
-Tongue Swing Hydraulic -Roll Gap Adjustable
-Tires 300/55-17 Flotation -Roll Timing Adjustable
-Trans. Width 11’ 2’’ (3.41m) -Windrow Range 4-6.5ft.(1.2-2m)
-Trans. Length 24’ 8’’ (7.51m)
-Trans. Lighting Standard
-SMV Symbol Standard FLAIL TINE CONDITIONING
-Design 86 Steel Y-Flails
DISC CUTTERBAR SPECIFICATIONS -Rotor Width 115in.(2920mm)
-Cutting Width 11 ft. 6in.(3.51m) -Rotor Speed 1000 rpm
-Cutting Height 1-4 in.(24-98 mm) -Intensity Adjustable Hood
-QuickMax™ System Standard -Windrow Range 4-6.5 ft. (1.2-2m)
-Num. Discs 9 Discs / 18 Knives -Wide Swath 9.1 ft.(2.8m)
-Type Low-profile
-Protection ShockPRO™ System TRACTOR REQUIREMENTS
-Skid Shoes Full Coverage -PTO Speed RPM 1000
-PTO Yoke 1 3/8'' - 21s
SWATH SPECIFICATIONS -Min. Power 87 PTO hp (64kW)
-Roll Conditioning -Hyd. Equipment 1DA / 1 SA
-Windrow Range 4-6.5ft.(1.2-2m)
-Flail Tine Conditioning WARRANTY
-Windrow 4-6.5 ft.(1.2-2m) -New Holland Standard Warranty
-Wide Swath 8.2 ft.(2.5m) Applies
DRIVE SPECIFICATIONS **Only for use with tractors having a
-Primary Std. U-Joint & fully enclosed cab.**
Swivel Gearbox
-Secondary Std. U-Joint &
Swivel Gearbox
-Slip Cutch Standard
-Overrunning Clutch Standard
Page 58
-HT3G 02
DISCBINE 312 CENTER PIVOT DMC
US PRICE LIST
-HT3G 02 0034 000 01-SEP-17 Page 57 of 160
Models
COMMERCIAL MODEL Weight Factory Data List Price
DISCBINE 312F 9027763P12 $36,056.00
DISCBINE 312R 9030222P50 $39,250.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_47083 OPERATOR'S MANUAL
712372 French for North America No Charge
712960 Spanish Language No Charge
SD_50047 HIGH STUBBLE KIT
715289 High Stubble Kit
The high stubble skid shoe kit adds taller skid shoes that mount
directly under the standard skid shoes. The high stubble skid shoe
kit increases the maximum theoretical stubble height to
approximately 120 mm (4.7 in).
-Discbine 310 Qnt. 8 raised skid shoes
-Discbine 312 Qnt. 9 raised skid shoes
if MODEL is DB312R 9000547P47 $711.00
if MODEL is DB312S 9000547P47 $711.00
Page 59
-HT2K 01
DISCBINE® 313 CENTER PIVOT DMC
US PRICE LIST
-HT2K 01 0034 000 01-SEP-17 Page 58 of 160
(New Holland, PA)
Standard Equipment
DB 313 DISC MOWER-CONDITIONER WIDE DRY™ ROLL CONDITIONING
-Swivel Hitch Standard -Roll Design Chevron
-Attachment 2-pt or Drawbar -Roll Width 125 in.(3175mm)
-Head Tilt Hydraulic -Roll Diameter 10-3/8 in. (264mm)
-Head Flotation Adjustable Springs -Roll Material Rubber or Steel
-Flotation Geometry Up & Back -Roll Speed 750/640 rpm
-Poly Bifold Hoods Standard -Roll Pressure System Torsion Bar
-Tongue Swing Hydraulic Center -Roll Pressure Adj. Hand Crank
Pivot -Roll Gap & Timing Adjustable
-Tires 2, 12.5L 15, 6PR
-Trans. Width 13 ft. 4 in.(4.04m) WIDE DRY™ FLAIL TINE CONDITIONING
-Trans. Lighting Standard -Design LeaningEdge™ Flail Tines
-SMV Symbol Standard -Tine Material Cast Steel
-Safety Chain Standard -Num. Tines 120
-Rotor Width 125 in.(3175mm)
DISC CUTTERBAR SPECIFICATIONS -Rotor Speed 1042 rpm
WARRANTY
-Cutting Width
-Cutting Height
-QuickMax™ Knives
13 ft.(4.0m)
.79-2.7 in.(20-69mm)
Standard
-Intensity
-Hood Liner
(752 rpm available)
Adjustable Hood
Replaceable
-Num.
-Disc
-Crop
Discs
Speed
Lifters
8 Large Oval
2250 rpm
Optional
Discs -Adjustment Hand Crank
OTHER OPTIONAL EQUIPMENT
-Knives/Disc 2 Reversible -Full Complement of Crop Lifters
-Std. Knives 14° Smooth Edge -Swivel Hitch Tow Bar Kit
-Type
-Protection
MowMax™ II Disc
Cutterbar
ShockPRO™ System
-Corner Market Kit
-Crop Divider Kit
-BioMass Harvesting Kits
-Rock Guard Heavy-Duty Cast Iron -High Stubble Skid Shoe Kit
-Skid Shoes Hardened Steel -Textured Hood Liner Kit (Flail Only)
SWATH SPECIFICATIONS
-Width Range
3-10 ft.(.91-3.0m)
TRACTOR REQUIREMENTS
-PTO Speed
1000 RPM
-Windrow Shields Adjustable -Power 90 PTO hp
-Swath Gate/Baffle
-Swath Wedges
Adjustable
Standard
-Hyd. Equipment 1DA / 1 SA
DRIVE SPECIFICATIONS
-Primary PTO
Std. U-Joint &
-New Holland Standard Warranty
Applies To Base
-Secondary PTO
-Slip Clutch
Swivel Gearbox
Std. U-Joint &
Swivel Gearbox
Standard
-MowMax 3 Year, Factory Cutterbar
Extended Warranty
**Only for use with tractors having a
-Overrunning Clutch Standard fully enclosed cab.**
Page 60
-HT2K 01
DISCBINE® 313 CENTER PIVOT DMC
US PRICE LIST
-HT2K 01 0034 000 01-SEP-17 Page 59 of 160
(New Holland, PA)
Models
COMMERCIAL MODEL CONDITIONER TYPE Weight Factory Data List Price
DB313F Flail Rotor Conditioner 6,420 LB 9033359P48 $43,324.00
DB313R Rubber on rubber chevron 6,420 LB 9034807P08 $45,204.00
DB313S Steel on steel chevron 6,420 LB 9035237P51 $45,763.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_41030 HITCH
716533 2-Point Swivel Hitch-Installed
ASAE Cat. II or III 3-Point Hitch Compatible
No Charge
716694 Drawbar Swivel Hitch-Installed
ASAE Cat. II or III Drawbar Compatible.
No Charge
717752 Swivel Tongue Less Hitch
Allows the use of a 'take-off' hitch from a previous unit
that has been replaced by the alternative hitch from Service Parts
(901363P67) ($1,771.00)
SD_C5814 CROP LIFTER SET
439140 CROP LIFTER KIT 439140
Full complement of crop lifters: Recommend when harvesting
ryegrass, triticale and other winter forage crops.
9000336P49 $437.00
SD_H5815 TEXTURED LINER KIT
716537 Textured Liner Kit
For flail units only, provides more aggressive conditioning
9000300P30 $390.00
COMPLETING PACKAGES
HITCH OPTIONS
HAYTOOL OPTIONS
CROP LIFTER
TEXTURED LINER
Page 61
-HT2K 01
DISCBINE® 313 CENTER PIVOT DMC
US PRICE LIST
-HT2K 01 0034 000 01-SEP-17 Page 60 of 160
(New Holland, PA)
SD_C5832 SKID SHOE
415017 Adjustable Skid Shoes Kit
Set of two (2) easily adjustable skid shoes - one for each
end of the unit. Cut height range 3/4 inch to 5 3/4 inches
9000600P60 $780.00
SD_41033 TOW BAR
716548 Tow Bar
Allows slow-speed towing of a 2-pt. swivel-hitch unit by a
tractor without a 3-pt. Includes safety chain.
Also allows slow-speed towing of a drawbar swivel-hitch unit
by a tractor without a drawbar adapter. Includes safety chain.
9000628P32 $816.00
SD_H5101 CROP DIVIDERS
717002 Crop Dividers
Pair of 2 dividers, one for each end of unit.
9000255P64 $332.00
SD_50018 CORNER MARKER KIT
716791 Corner Marker Kit
For better visibility of the corners for operation and transport
9000152P46 $198.00
SD_50047 HIGH STUBBLE KIT
715289 High Stubble Kit
Set of eight (8) taller skid shoes. Cut height range
3 inches to 5 1/2 inches
NOT COMPATIBLE with adjustable skid shoe option 415017
9001475P32 $1,916.00
SD_H5811 PUSHBAR DIVIDER
716695 Push Bar For Tall Crops
For tall, cane-type or biomass crops. Leans crop forward
in front of the header
9000608P30 $790.00
ADJUSTABLE SKID SHOE
TOW BAR
CROP DIVIDERS
CORNER MARKERS
HIGH STUBBLE KIT
PUSH BAR
Page 62
-HT2K 01
DISCBINE® 313 CENTER PIVOT DMC
US PRICE LIST
-HT2K 01 0034 000 01-SEP-17 Page 61 of 160
(New Holland, PA)
SD_H5405 CANE/BIOMASS HARVEST
439045 Cane/Biomass Kit
Includes windrow shield extensions, (4) extra-high skid shoes,
and lift lockout channels. Cut height range 5 inches to 7 3/4 inches.
9001298P22 $1,686.00
SD_47083 OPERATOR'S MANUAL
715257 French Canadian Manual - NA No Charge
715309 Spanish Manual - NA No Charge
CANE/BIOMASS KIT
OPERATORS MANUAL
Page 63
-HT2K 02
DISCBINE® 316 CENTER PIVOT DMC
US PRICE LIST
-HT2K 02 0034 000 01-SEP-17 Page 62 of 160
(New Holland, PA)
Standard Equipment
DB 316 DISC MOWER-CONDITIONER WIDE DRY™ ROLL CONDITIONING
-Swivel Hitch Standard -Roll Design Chevron
-Attachment 2-pt or Drawbar -Roll Width 125 in.(3175mm)
-Head Tilt Hydraulic -Roll Diameter 10-3/8 in. (264mm)
-Head Flotation Adjustable Springs -Roll Material Rubber or Steel
-Flotation Geometry Up & Back -Roll Speed 750/640 rpm
-Poly Bifold Hoods Standard -Roll Pressure System Torsion Bar
-Tongue Swing Hydraulic Center -Roll Pressure Adj. Hand Crank
Pivot -Roll Gap & Timing Adjustable
-Tires 2, 12.5L 15, 6PR
-Trans. Width 16 ft. 7 in.(5.05m) WIDE DRY™ FLAIL TINE CONDITIONING
-Trans. Lighting Standard -Design LeaningEdge™ Flail Tines
-SMV Symbol Standard -Tine Material Cast Steel
-Safety Chain Standard -Num. Tines 120
-Rotor Width 125 in.(3175mm)
DISC CUTTERBAR SPECIFICATIONS -Rotor Speed 1042 rpm
WARRANTY
-Cutting Width
-Cutting Height
-QuickMax™ Knives
16 ft.3 in.(4.95m)
.79-2.7 in.(20-69mm)
Standard
-Intensity
-Hood Liner
(752 rpm available)
Adjustable Hood
Replaceable
-Num.
-Disc
-Crop
Discs
Speed
Lifters
10 Large Oval
2250 rpm
Optional
Discs -Adjustment Hand Crank
OTHER OPTIONAL EQUIPMENT
-Knives/Disc 2 Reversible -Full Complement of Crop Lifters
-Std. Knives 14° Smooth Edge -Swivel Hitch Tow Bar Kit
-Type
-Protection
MowMax™ II Disc
Cutterbar
ShockPRO™ System
-Corner Market Kit
-Crop Divider Kit
-BioMass Harvesting Kits
-Rock Guard Heavy-Duty Cast Iron -High Stubble Skid Shoe Kit
-Skid Shoes Hardened Steel -Textured Hood Liner Kit (Flail Only)
SWATH SPECIFICATIONS
-Width Range
3-10 ft.(.91-3.0m)
TRACTOR REQUIREMENTS
-PTO Speed
1000 RPM
-Windrow Shields Adjustable -Power 100 PTO hp
-Swath Gate/Baffle
-Swath Wedges
Adjustable
Standard
-Hyd. Equipment 1DA / 1 SA
DRIVE SPECIFICATIONS
-Primary PTO
Std. U-Joint &
-New Holland Standard Warranty
Applies To Base
-Secondary PTO
-Slip Clutch
Swivel Gearbox
Std. U-Joint &
Swivel Gearbox
Standard
-MowMax 3 Year, Factory Cutterbar
Extended Warranty
**Only for use with tractors having a
-Overrunning Clutch Standard fully enclosed cab.**
Page 64
-HT2K 02
DISCBINE® 316 CENTER PIVOT DMC
US PRICE LIST
-HT2K 02 0034 000 01-SEP-17 Page 63 of 160
(New Holland, PA)
Models
COMMERCIAL MODEL CONDITIONER TYPE Weight Factory Data List Price
DB316F Flail Rotor Conditioner 6,845 LB 9039501P77 $51,301.00
DB316R Rubber on rubber chevron 6,845 LB 9039731P23 $51,599.00
DB316S Steel on steel chevron 6,845 LB 9040161P66 $52,158.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_41030 HITCH
716533 2-Point Swivel Hitch-Installed
ASAE Cat. II or III 3-Point Hitch Compatible
No Charge
716694 Drawbar Swivel Hitch-Installed
ASAE Cat. II or III Drawbar Compatible.
No Charge
717752 Swivel Tongue Less Hitch
Allows the use of a 'take-off' hitch from a previous unit
that has been replaced by the alternative hitch from Service Parts
(901363P67) ($1,771.00)
SD_C5814 CROP LIFTER SET
439140 CROP LIFTER KIT 439140
Full complement of crop lifters: Recommend when harvesting
ryegrass, triticale and other winter forage crops.
9000336P49 $437.00
SD_H5815 TEXTURED LINER KIT
716537 Textured Liner Kit
For flail units only, provides more aggressive conditioning
9000300P30 $390.00
COMPLETING PACKAGES
HITCH OPTIONS
HAYTOOL OPTIONS
CROP LIFTER
TEXTURED LINER
Page 65
-HT2K 02
DISCBINE® 316 CENTER PIVOT DMC
US PRICE LIST
-HT2K 02 0034 000 01-SEP-17 Page 64 of 160
(New Holland, PA)
SD_C5832 SKID SHOE
415017 Adjustable Skid Shoes Kit
Set of two (2) easily adjustable skid shoes - one for each
end of the unit. Cut height range 3/4 inch to 5 3/4 inches
9000600P60 $780.00
SD_41033 TOW BAR
716548 Tow Bar
Allows slow-speed towing of a 2-pt. swivel-hitch unit by a
tractor without a 3-pt. Includes safety chain.
Also allows slow-speed towing of a drawbar swivel-hitch unit
by a tractor without a drawbar adapter. Includes safety chain.
9000628P32 $816.00
SD_H5101 CROP DIVIDERS
717002 Crop Dividers
Pair of 2 dividers, one for each end of unit.
9000255P64 $332.00
SD_50018 CORNER MARKER KIT
716791 Corner Marker Kit
For better visibility of the corners for operation and transport
9000152P46 $198.00
SD_50047 HIGH STUBBLE KIT
715289 High Stubble Kit
Set of eight (8) taller skid shoes. Cut height range
3 inches to 5 1/2 inches
NOT COMPATIBLE with adjustable skid shoe option 415017
9001475P32 $1,916.00
SD_H5811 PUSHBAR DIVIDER
716695 Push Bar For Tall Crops
For tall, cane-type or biomass crops. Leans crop forward
in front of the header
9000608P30 $790.00
ADJUSTABLE SKID SHOE
TOW BAR
CROP DIVIDERS
CORNER MARKERS
HIGH STUBBLE KIT
PUSH BAR
Page 66
-HT2K 02
DISCBINE® 316 CENTER PIVOT DMC
US PRICE LIST
-HT2K 02 0034 000 01-SEP-17 Page 65 of 160
(New Holland, PA)
SD_H5405 CANE/BIOMASS HARVEST
439045 Cane/Biomass Kit
Includes windrow shield extensions, (4) extra-high skid shoes,
and lift lockout channels. Cut height range 5 inches to 7 3/4 inches.
9001298P22 $1,686.00
SD_47083 OPERATOR'S MANUAL
715257 French Canadian Manual - NA No Charge
715309 Spanish Manual - NA No Charge
CANE/BIOMASS KIT
OPERATORS MANUAL
Page 67
-HT2S 01
MODEL 472/488 HAYBINE® MOWER-CONDITIONER
US PRICE LIST
-HT2S 01 0034 000 01-SEP-17 Page 66 of 160
(New Holland, PA)
Standard Equipment
CUTTERBAR SPECIFICATIONS
Models
COMMERCIAL MODEL KNIFE Weight Factory Data List Price
472MC BTO STD GUARD 2,460 LB 9015467P76 $20,088.00
472MC BTO STUB GUARD 2,460 LB 9015586P34 $20,242.00
488MC BTO STD GUARD 3,040 LB 9016704P38 $21,694.00
488MC BTO STUB GUARD 3,040 LB 9016859P15 $21,895.00
MODEL 472 & 488
-Hitch
Equal Angle
RUBBER CHEVRON
-Roll Width
ROLL CONDITIONING
-Attachment
-Head Tilt
Drawbar Extension
Manual
Model 472
Model 488
85 in.
102 in.
-Head Flotation Adjustable Springs -Roll Diameter
-Tongue Swing
-Tires
Model 472
Manual-Rope Pull
2,25x7.5-15
Model 472
Model 488
-Roll Speed
7 3/4 in.
10 3/8 in.
Model 488
-Trans. Width
Model 472
2,25x9.5-15
10 ft. 5 in.
Model 472
Model 488
-Roll Pressure
System
818 rpm
637 rpM
Torsion Bar
Model 488
-Trans. Lighting
-SMV Symbol
-Safety Chain
12 ft. 2 in.
Standard
Standard
Standard
-Roll Pressure
-Roll Drive
-Swath Range
Model 472
Model 488
Adj. Hand Crank
Chain Driven
38-72 in.
38-96 in.
-Cutting Width
Model 472
7 ft. 3 in.
OPTIONAL EQUIPMENT
-Hydraulic Lift Kit
(Req. 1 SA)
Model 488
-Cutting Height
9 ft. 3 in.
1.25-4.25in.
TRACTOR REQUIREMENTS
-Std. Knives
-Hold Downs
-Guards
Over-serrated
Adjustable
Standard Type
-PTO Speed 540 RPM
REEL SPECIFICATIONS
-Num. Tine Bars
4
-Speed Adj.
-Position
Variable sheave
Adjustable
WARRANTY
-Drive Belt & Chain New Holland Standard Warranty Applies
Page 68
-HT2S 01
MODEL 472/488 HAYBINE® MOWER-CONDITIONER
US PRICE LIST
-HT2S 01 0034 000 01-SEP-17 Page 67 of 160
(New Holland, PA)
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_20096 HYDRAULIC LIFT KIT
715307 Hyd Lift Kit
Includes single-acting cylinder and single hydraulic hose.
22 LB 9000328P79 $427.00
SD_47083 OPERATOR'S MANUAL
715294 French Canadian 1 LB No Charge
715309 Spanish Manual - NA 1 LB No Charge
FACTORY SUPPLIED OPTIONS
HYDRAULIC KITS
LANGUAGE KITS
Page 69
-HT2U 01
H7150 PIVOT TONGUE SMC - TRAIL FRAME
US PRICE LIST
-HT2U 01 0034 000 01-SEP-17 Page 68 of 160
Standard Equipment
**HS SERIES HAYBINE® MOWER- HS - REEL SPECIFICATIONS
CONDITIONER HEADS ARE SOLD -Num. Tine Bars 5 - Segmented
SEPARATELY; MUST ORDER HS 14, 16, -Tine Type Full-Flex
OR 18 SMC HEAD TO COMPLETE THE -Speed Adj. Variable sheave
H7150 TRAIL FRAME.** -Position Adjustable
-Drive Belt & Chain
**HS SERIES SPECIFICATIONS
PROVIDED ARE FOR CONVENIENCE AND HS - CONDITIONING SPECIFICATIONS
ARE NOT INCLUDED WITH THE BASE** -Roll Design Rubber Chevron
-Roll Width 102 in.
Model H7150 TRAIL FRAME -Roll Diameter 10 3/8 in.
-Drive Tongue Mounted -Roll Speed 717 rpm
Drive Pump -Roll Pressure System Torsion Bar
-Attachment Drawbar Extension -Roll Pressure Adj. Hand Crank
-Head Tilt Hydraulic -Roll Drive Gearbox & Shafts
-Head Flotation Adjustable Springs -Swath Range 38 - 96 in.
-Tongue Swing Center-Pivot,
Hydraulic HS - TRANSPORT WIDTH
-Tires 2,31x13.5-15 8PR -HS 14 head 16 ft. 3 in.
-Trans. Lighting Standard -HS 16 head 18 ft. 3 in.
-SMV Symbol Standard -HS 18 Head 20 ft. 3 in.
-Safety Chain Standard
H7150 - TRACTOR REQUIREMENTS
HS - CUTTERBAR SPECIFICATIONS -PTO Speed 1000 RPM
-Cutting Width -Power Req. 70 hp
HS 14 Head 14 ft. 3 in. -Hydraulic Req. 1 SA / 1 DA
HS 16 Head 16 ft. 3 in.
HS 18 Head 18 ft. 3 in.
-Cutting Height 1.2-6.2 in.
-Drive Dual Wobble Drives WARRANTY
-Std. Knives Over-serrated New Holland Standard Warranty Applies
-Hold Downs Adjustable
-Guards Standard Type *Not for sale in Quebec*
Models
COMMERCIAL MODEL MODEL Weight Factory Data List Price
H7150 BTO H7150 SMC 3,050 LB 9014797P09 $19,217.00
Page 70
-HT2U 01
H7150 PIVOT TONGUE SMC - TRAIL FRAME
US PRICE LIST
-HT2U 01 0034 000 01-SEP-17 Page 69 of 160
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_MD MODEL
H7150 H7150 SMC No Charge
SD_41030 HITCH
727148 Tongue 14/16 ft. No Charge
727149 Tongue 18 ft. 9001138P06 $1,478.00
SD_H5801 COMPLETING PACKAGES
727150 Completing Group 14 ft. No Charge
727151 Completing Group 16/18 ft. No Charge
Page 71
-HT2W 01
SPEEDROWER® 160 SP WINDROWER
US PRICE LIST
-HT2W 01 0034 000 01-SEP-17 Page 70 of 160
(Grand Island, NE)
Standard Equipment
ENGINE CHASSIS & REAR AXLE
-Engine MFG FPT/New Holland -Rear axle 3° caster post swivels
-Emissions Level Tier 4B maintain chassis height with nearly
-Rated Power 150 hp rated* zero rear height change and heavy-
-Displacement 274 cu. In. (4.5 L) duty rotational dampers.
-Num. Cylinders 4 -Independent rear axle suspension
-Aspiration Turbocharged -Hay Only - Heavy-duty 120 in.
-Pre-cleaning Top Spin™ ** adjustable rear axle with forked arm
-Intercooling Air-to-Air support and 14L x 16.1 8 PR rear
-Fuel System tires
-High-pressure common rail -Draper Ready - high clearance 135 in.
-Electronic fuel injection adjustable rear with forked arm
support and 14L x 16.1 8 PR rear
* Manufacturer's rating per ECE R120 / tires
ISO 14396 -Optional cast single arm support with
** TOPSPIN™ is a registered trademark 16.5L x 16.1 RP rear tires (Standard
of the Donaldson Company, Inc. on Prairie Special Configuration)
EMISSIONS SYSTEM DRIVELINE
-EcoBlue™ HI-eSCR high-efficiency -Two speed range hydrostatic drive
Selective Catalytic Reduction with -Apx. top speed of 18 MPH
engine exhaust muffler / SCR -HD double reduction planetary
final drives
COOLING SYSTEM -Spring applied, hydraulically released
-High-efficiency, multi-layer cooling park brake (console switch controlled)
-High-capacity rotary screen cleaning STEERING SYSTEM
system. -2000 psi hydraulic steering system
-Chaff wiper kit with dedicated pump and load
-Vertical opening rotary air screen reactive steering provides operator
feedback and optimized straight line
ELECTRICAL SYSTEM tracking.
-Voltage 12-Volt
-Alternator 150 amp HEAD DRIVE PUMP
-Battery CCA 925 CCA -Hay Only - Fixed displacement 29 GPM
-Battery Type Low maintenance Head Drive Pump
-Num. Batteries 1
-Draper Ready - Variable displacement
FUEL/DEF CAPACITIES twin 40 GPM head drive pumps
-Diesel Fuel 120-gallon (454 L) -Dedicated knife drive (High PSI)
-DEF Fluid 19-gallon (72 L) -Dedicated canvas & reel drive
(Low PSI)
HEAD ATTACHMENT
-Hydraulic poppet couplers for head
drive motor attachment
Page 72
-HT2W 01
SPEEDROWER® 160 SP WINDROWER
US PRICE LIST
-HT2W 01 0034 000 01-SEP-17 Page 71 of 160
(Grand Island, NE)
Standard Equipment
-Hydraulic head flotation -Air-conditioner and heater with
-Hydraulic Head Tilt manual temperature controls
-In-cab & Remote control switches -Dual cab air filtration system:
-Electronic tilt indicator displayed -(1) External fresh air filter
on 4-line display and Intelliview™ IV -(1) In-cab air recirculation filter
equipped windrowers. -Cab interior lighting package
-Tilt indicator on the tilt cylinder -(1) Center dome light
-4" stroke head tilt cylinder -(1) Right-hand console light
-Entertainment & communications
-Single lever head transport lock -AM/FM/weather band Radio with
system antenna and two speakers.
-Standard head latch system -Auxiliary input socket for MP3 player,
-Head lift cylinders satellite radio or portable CD player
-Hay Only - Diameter 2.5 inch -(2) Additional radio port locations
-Draper Ready - Diameter 2.75 inch with DIN mounting slots
-Business band antenna ready
WINDROW SHIELDS -Front windshield wiper/washer
-Manual adjust hay windrow shields -(2) External mount rear view mirrors
(Non-draper Machines Only) (mechanical adjust)
-Fixed windrow shields -(1) In-cab rearview mirror
(Draper Machines Only) -(1) 12-volt auxiliary power outlet
-Electronic service tool diagnostic
WEIGHTING AND BALLASTING port
-Less chassis ballast; order ballast
as appropriate for attached head(s) ENGINE SHIELDS
-Sheet molded compound side shields
STANDARD CAB -Easy-open gas strut supported
-Comfort Ride™ cab suspension and
air-ride rear axle suspension MULTI-FUNCTION HANDLE
-Curved, tinted glass with left-hand -CommandGrip™ MFH with low-effort
entry door forward-neutral-reverse ground
-Adjustable tilt/telescopic steering speed control with back lighting.
column -Haying MFH: Short stock without
-Fore/Aft adjustable console with cup palm rest and hay specific operation
holder, lighter & ashtray decal affixed to right cab window.
-Deluxe fabric-covered seating -Draper MFH: Traditional tall stalk
-Air-suspension design with palm rest, and hay
-Fore/aft isolator specific operational decal decal
-Lumbar adjustment affixed to right cab window.
-Ride dampener adjustment
-Retractable seat belt -MFH Controls for:
-Operator’s presence system -Performance monitor display
-Instructor's seat with seat belt selection
-Front windshield wiper/washer -Head raise/lower
-Climate systems -Head tilt control
Page 73
-HT2W 01
SPEEDROWER® 160 SP WINDROWER
US PRICE LIST
-HT2W 01 0034 000 01-SEP-17 Page 72 of 160
(Grand Island, NE)
Standard Equipment
-Auto guidance engagement TRANSPORT LIGHTING
-Reel speed (draper head) -(2) Halogen, cab roof-mounted
-Reel raise/lower (draper head) transport lights
-Reel fore/aft (draper head) -(2) Combination rear tail light/brake
-Head cut height (draper head) lights
-Head lateral tilt (draper head) -(2) Combination turn signal/flashing
-Return to cut (draper head) hazard lights
RIGHT-HAND CONSOLE CONTROLS WORK LIGHTING
-Engine speed -(4) Halogen, Cab Roof-mounted Work
-Head engagement Lights
-Head power reverser -(2) Halogen, rear work lights
-Head flotation adjustment -(2) Halogen, stubble lights
-Park brake control -Time delay cab exit light
-Cold start (when equipped) -12 volt, service light receptacle
MONITORS AND DISPLAYS WARRANTY
-Console mounted, adjustable displays New Holland Standard Warranty
& monitors Applies
-Standard Monitor: 4-Line, TS-Ready
for Auto Guidance Ready units
-Optional: 4-Line display for Non-Auto
Guidance Ready, OR IntelliView™ IV,
10 inch color touch screen display
-Monitored systems
-Engine oil pressure
-Engine coolant temperature
-Engine rpm
-Battery voltage
-Ground speed
-Diesel fuel & DEF fluid levels
-Engine/head hours
-Hydrostatic transmission charge
oil pressure
TECHNOLOGY FEATURES
-PLM™ Precision Land Management
IntelliSteer™ auto guidance ready
ENGINE SHUTDOWN PROTECTION:
-Automatic engine shutdown
-Low engine oil pressure
-Engine coolant overheat
-Low hydrostatic charge oil pressure
Page 74
-HT2W 01
SPEEDROWER® 160 SP WINDROWER
US PRICE LIST
-HT2W 01 0034 000 01-SEP-17 Page 73 of 160
(Grand Island, NE)
Standard Equipment
HIGH VALUE OPTIONS & PACKAGES
-Deluxe cab upgrade Includes
-Automatic temperature controls
-Deluxe satellite radio w/ bluetooth -AutoGuide Omnistar
connectivity -Factory IntelliSteer™ Auto guidance
-Two (2) additional radio speakers Complete
(4 radio speakers in total) -OmniStar® correction signal unlocked
-Front/rear sun shades (+/- 3 to 5 inch accuracy)
-Additional noise suppression -IntelliView™ IV color touch screen
display
-Prairie Special draper configuration -Navigation Controller III
includes the following options: -New Holland 372 GNSS Receiver
-Auto Guidance Ready with 4-line
display/TS Ready -AutoGuide WAAS
-Deluxe cab package -Factory IntelliSteer™ Auto Guidance
-Extra wide 135 inch adjustable rear Complete
draper axle -WAAS Correction signal (+/- 6 to 8
-Cold weather package inch accuracy)
-600/65R28 R1W drive tires -IntelliView™ IV color touch screen
-High clearance single arm display
tail wheel with 16.5L tires -Navigation Controller III
-Fixed deflector shields (Draper) -New Holland 372 GNSS Receiver
-Head quick latch (Draper)
-Prairie Special logo decal
-Speedrower 160 Hay
-Sickle head adaptor kit
-Auto Guidance Ready with 4-line
display/TS Ready
-Deluxe cab package
-Cold weather package
-21L x 28 14 PR R4 drive tires
-Standard clearance forked arm
tail wheel with 14Lx16.1 tires
-Manual deflector shields (Hay)
-Header quick latch (Hay)
-Std. road speed without power
Down
Page 75
-HT2W 01
SPEEDROWER® 160 SP WINDROWER
US PRICE LIST
-HT2W 01 0034 000 01-SEP-17 Page 74 of 160
(Grand Island, NE)
Models
COMMERCIAL MODEL ENGINE POWER Weight Factory Data List Price
SPEEDROWER_160 160 HP 14,000 LB 9095357P57 $123,841.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_16066 WHEELS AND TIRES 8019008 No Front Tires/Wheels No Charge
8092907 18.4 x 26 12PR R4 9003718P33 $4,829.00
8091907 480/80R26 149 R3 9003899P28 $5,064.00
8087907 18.4 x R26 150 R1 9004312P00 $5,600.00
8089907 21L x 28 14PR R4 9004597P67 $5,971.00
8001407 600/65R28 154 R1W 9005259P10 $6,830.00
8088907 580/70R26 149 R3 9005554P78 $7,214.00
SD_H6202 REAR TIRE - WHEEL SUPPORT
727103 Forked/14L w/Damper
Standard-Clearance, 3° forked arm caster assemblies with
heavy-duty rotational dampers and 14L x 16.1 tires & wheels
maintain chassis height with near zero rear height change when
reversing.
No Charge
726904 Single/16.5L w/Damper
High-Clearance, 3°single arm caster assemblies and heavy-duty
rotational dampers with 16.5L x 16.1 tires maintain chassis height
with near zero rear height change when reversing.
9001332P87 $1,731.00
HAYTOOLS TIRES AND WHEELS
DRIVE TIRES
REAR TIRES
Page 76
-HT2W 01
SPEEDROWER® 160 SP WINDROWER
US PRICE LIST
-HT2W 01 0034 000 01-SEP-17 Page 75 of 160
(Grand Island, NE)
SD_06037 REAR LIGHTS
726890 Deluxe LED Rear Light Package
Upgrade provides two (2) forward-facing LED stubble lights and
two (2) rear-facing LED stubble lights.
9001132P67 $1,471.00
SD_06075 FRONT LIGHTS
726888 Deluxe LED Front Light Package
Upgrade provides two (2) forward-facing halogen road transport
lights and four (4) high-intensity LED field lights.
9001213P52 $1,576.00
SD_H5807 DRAPER HEADER ADAPTER
726907 Draper Ready
Includes single and double swath delivery capabilities, tandem
EDC header drive pumps, lift arm position sensors, fixed
position crop deflectors and header quick latch system.
For Hay operation order windrow forming shield from
the DIA section part # 87473378
REQUIRED for Durabine™ disc head operation – Order Hydraulic
Cross over kit option with new disc headers #439139 or source
kit through NH Parts for heads already in service(PN. 47522054).
(Speedrower 220/260 Draper Ready units are only available
with 600, 580, & 21L size front drive tires)
9007381P22 $9,586.00
SD_H6203 HEADER Q-A SYSTEM
726957 Header Quick Latch-Non Draper
Lever operated quick release system for header attachment locks.
9000097P79 $127.00
726985 Header Quick Latch - Draper
Lever operated quick release system for header attachment locks.
9000097P79 $127.00
SD_02024 COLD WEATHER PKG
761159 Cold Weather Package 9000377P30 $490.00
FACTORY SUPPLIED OPTIONS
LIGHT KITS
ADAPTER PACKAGES
ENGINE GROUP
Page 77
-HT2W 01
SPEEDROWER® 160 SP WINDROWER
US PRICE LIST
-HT2W 01 0034 000 01-SEP-17 Page 76 of 160
(Grand Island, NE)
SD_N6424 SPEED OPTION
726777 Std Road Speed w/o Power Down
Two-speed hydrostatic drive, WITHOUT header lift arm power
down. TOP SPEED APPROXIMATELY 18 MPH
No Charge
727143 Std Rd Speed w/Power Down ND
Two-speed hydrostatic drive, WITH header lift arm power down.
TOP SPEED APPROXIMATELY 18 MPH - NON DRAPER ONLY
9000235P62 $306.00
727170 Std Rd Speed w/PDown Draper
Two-speed hydrostatic drive, WITH header lift arm power down.
TOP SPEED APPROXIMATELY 18 MPH - DRAPER ONLY
9000235P62 $306.00
727144 High Rd Speed w/Power Down ND
Three-speed hydrostatic drive, WITH header lift arm power down.
TOP SPEED APPROXIMATELY 24 MPH - NON DRAPER ONLY
9002120P58 $2,754.00
727171 High Road Speed w/PDown Draper
Three-speed hydrostatic drive, WITH header lift arm power down.
TOP SPEED APPROXIMATELY 24 MPH - DRAPER ONLY
9002120P58 $2,754.00
SD_05009 CAB
725843 Deluxe Cab Upgrade
Deluxe Cab Upgrade includes front and rear sunscreens, automatic
temperature controls, additional integrated sound suppression
materials, four speakers, and Bluetooth/Satellite/CD/USB Radio
with auxiliary input jack.
9002391P62 $3,106.00
SD_05072 MIRROR
725972 Deluxe Mirrors
Electrically adjustable mirrors from headliner mounted switch.
9000571P34 $742.00
SD_21014 CAMERAS
439110 Rear Camera Kit
REQUIRES Intelliview™IV or 4-line Display with T/S Ready Option
where display is moved from another vehicle. Kit contains one (1)
rear-facing camera and harness to connect to Intelliview IV display
only. System capacity of up to three (3) cameras, additional
cameras sold separately.
9000687P61 $893.00
TRANSMISSION GROUP
CAB GROUP
Page 78
-HT2W 01
SPEEDROWER® 160 SP WINDROWER
US PRICE LIST
-HT2W 01 0034 000 01-SEP-17 Page 77 of 160
(Grand Island, NE)
SD_25003 CAB DISPLAY MONITOR
726992 4-Line Display, T-S Ready
Fixed top-line with Engine RPM & Ground Speed. Bottom three
(3) lines are customizable to operator preference. REQUIRED with
Auto Guidance Ready Configurations; also provides mounting
bracket and wiring harness to connect IntelliView™IV display
moved from another vehicle into the windrower.
No Charge
726894 Large Color Touch Screen Disp.
Factory installed and tested IntelliView™IV 10-inch color touch
-screen display with factory integrated vehicle controls and auto-
guidance software.
REQUIRED with Auto Guidance Complete Configurations
9003328P71 $4,323.00
726893 4-Line Display
Fixed top-line with Engine RPM & Ground Speed. Bottom three
(3) lines are customizable to operator preference. NON-Auto
Guidance Ready Configurations ONLY.
(900170P94) ($222.00)
SD_25010 DISPLAY
726908 Cab A-Pillar Display
NOT COMPATIBLE with IntelliView™IV touch-screen display,
provides additional warning lights and gauges to complement
4-line display equipped windrowers.
9000492P80 $640.00
SD_N6393 SEATS
726892 Leather Seats
Operator’s seat with air-suspension, leather-covered with comfort
heating and folding leather covered instructor’s seat.
9001114P96 $1,448.00
SD_09002 AUX HYD PUMP AND CONTROL VALVE
725998 Gear Pump and Control Valve
DRAPER READY UNITS ONLY! REQUIRED when Hydraulic Reel
Drive Kit #716961046 is installed on HS series headers.
9001121P89 $1,457.00
727085 Gear Pump/Cntl Valve NonDraper
NON DRAPER READY UNITS ONLY! REQUIRED when Hydraulic
Reel Drive Kit #716961046 is installed on HS series headers.
9001121P89 $1,457.00
HYDRAULICS GROUP
Page 79
-HT2W 01 0034 000 01-SEP-17 Page 78 of 160
-HT2W 01
SPEEDROWER® 160 SP WINDROWER
US PRICE LIST
(Grand Island, NE)
SD_H5407 TRANSPORT BALLAST BOX
439106 Transport Ballast Box
Provides front ballast REQUIRED when transporting/driving a
windrower without a head. Customizable ballast box matches the
weight of removed head for proper ballasting. Dealer assembly
required of bolt-together ballast box and the addition of specific
concrete amounts. See ballast chart for required concrete
amounts.
NOT COMPATIBLE WITH 4-CY NON-DRAPER
9002380P07 $3,091.00
SD_H5408 RR BALLAST HANGAR KI
439128 Rear Ballast Hangar Kit
Rear ballast hanger provides a rear weight bracket for use with
100 pound suitcase weights PN:718215036 when rear ballast
recommendations exceed the ballast box capacity.
REQUIRED: Duraswath™ 436HB and 440HB draper heads
175 LB 9000934P78 $1,214.00
SD_T4980 BALLAST PACKAGE
SEE BALLASTING CHART PG. XX
727105 200 lbs. - Ballast Kit
SR160-4CY Draper & Haybine® HS18 Header
SR220-6CY L-HP, Durabine™ 416, & Duramerger™ 419
SR260-6CY H-HP & Durabine™ 416
200 LB 9000190P96 $248.00
727106 400 lbs. - Ballast Kit
SR160-4CY Non-Draper & Haybine® HS16 Header
SR220-6CY L-HP & Durabine™ 416
SR220-6CY L-HP & DuraSwath™425HB
SR260-6CY H-HP, DuraMerger™419, & Durabine™ 419 Header
400 LB 9000383P46 $498.00
727178 600 lbs. - Ballast Kit
SR160-4CY Non-Draper & Haybine® HS18 Header
SR160-4CY Draper, DuraSwath™425HB
SR220-6CY L-HP, DuraSwath™425HB
SR260-6CY H-HP & Durabine™ 419
600 LB 9000574P42 $746.00
727107 800 lbs. - Ballast Kit
-Not recommended for Tier 4b Speedrower® Models
800 LB 9000767P69 $997.00
727179 1200 lbs. - Ballast Kit
SR260-6CY H-HP Draper & Duraswath™ 430HB Header
1200 LB 9001150P38 $1,494.00
727109 1400 lbs. - Ballast Kit
SR160-4CY Draper & Duraswath™ 430HB Header
SR220-6CY L-HP Draper & Duraswath™ 430HB Header
1400 LB 9001342P11 $1,743.00
WEIGHT GROUP
Page 80
-HT2W 01 0034 000 01-SEP-17 Page 79 of 160
-HT2W 01
SPEEDROWER® 160 SP WINDROWER
US PRICE LIST
(Grand Island, NE)
727110 1600 lbs. - Ballast Kit
-Duraswath™ 436HB and 440HB Draper Headers require
maximum ballast capacity and additional Rear Ballast Hanger
Wholegoods Kit #439128 (175 lbs.) and additional suitcase
weights PN. 718215036 (100 lbs. each) sourced from CNH
Industrial Parts & Service.
1600 LB 9001535P38 $1,994.00
XT4980X Standard No Ballast Package
SR160-4CY Non-Draper & Haybine® HS14 Header
SR160-4CY Draper & Haybine® HS14, HS16, HS18 Heads
SR220-6CY L-HP & Haybine® HS16 and HS18 Heads
SR260-6CY H-HP & Haybine® HS16 & HS18 Heads
SR260-6CY H-HP, DuraMerger™419, & Durabine™ 416 Header
0 LB No Charge
SD_27047 AUTOGUIDANCE
726897 AutoGuidance Ready
INCLUDED IN BASE:
1- All Cab and Chassis wiring, including wiring connection to
IntelliView™IV touch screen display
2- Electrohydraulic auto-guidance steering valve
3- Mounting provisions for Navigation Controller & GPS 372
Receiver
TO COMPLETE FACTORY EQUIPPED AUTO GUIDANCE ORDER:
1- IntelliView™IV Large Color Touch Screen Display
2- GPS Receiver (WAAS or OmniSTAR Accuracy)
3- Navigation Controller II
No Charge
727063 No AutoGuidance Ready (903377P22) ($4,386.00)
SD_27060 GPS RECEIVER
X27060X No GPS Receiver No Charge
726994 GPS 372 Receiver - WAAS
Factory Installed - Narrow / Wide Band NH372 Receiver
WAAS Accuracy
9002548P70 $3,310.00
726995 GPS 372 Receiver - OMNISTAR
Factory Installed - Narrow / Wide Band NH372 Receiver
OmniSTAR Accuracy Unlock
9004512P20 $5,860.00
SD_27061 NAV CONTROLLER
X27061X No NAV Controller No Charge
726997 NAV Controller
Factory Installed Auto Guidance Navigation III Controller
9004248P09 $5,517.00
AUTOGUIDANCE
Page 81
-HT2W 01 0034 000 01-SEP-17 Page 80 of 160
-HT2W 01
SPEEDROWER® 160 SP WINDROWER
US PRICE LIST
(Grand Island, NE)
SD_H5409 TELEMATICS KIT
439129 Telematics Kit
PLM™ CONNECT – Factory supplied/Dealer Installed option kit
REQUIRES Intelliview™IV Display, annual PLM Connect
subscription, and dealer setup of customer access to PLM
CONNECT customer dashboard site.
Contact CNH Industrial Parts & Service for pricing and full list of
available subscriptions, PLM Connect service level information,
and cellular network coverage.
9001044P12 $1,356.00
SD_47083 OPERATOR'S MANUAL
439130 English Lang Manual No Charge
715294 French Canadian No Charge
715309 Spanish Manual - NA No Charge
X47083X No Additional Operators Manual No Charge
SD_05143 REMOTE WINDROW SHIELD CONTROL
717131 Remote Windrow Shield Control
Provides in cab electrical adjustment of swath forming shields.
(CANNOT be used with fixed shields on draper-ready units.)
9001188P88 $1,544.00
SD_20107 HYDRAULIC REEL DRIVE
716961 Hydraulic Reel Drive Kit
FOR USE WITH HS SERIES SMC HEADS ONLY: Also requires
engine mounted auxiliary hydraulic pump with control valve
(Draper or Non-draper Configurations) and HS header reel drive
DIA# 716961076 installed on head.
9000483P56 $628.00
SD_45036 SICKLE HEADER ADAPT
716965 Sickle Header Adaptor Kit
REQUIRED FOR HS SICKLE HEAD OPERATION
Includes header drive motor and hoses with poppet style quick
couplers.
9001137P29 $1,477.00
OTHER
LANGUAGE KITS
FIELD INSTALLED HEADER COMPLETING PACKAGES
FOR SHIPMENT WITH BASE UNIT ONLY
Page 82
-HT2W 02
SPEEDROWER® 220 SP WINDROWER
US PRICE LIST
-HT2W 02 0034 000 01-SEP-17 Page 81 of 160
(Grand Island, NE)
Standard Equipment
ENGINE CHASSIS & REAR AXLE
-Engine MFG FPT/New Holland -Rear axle 3° caster post swivels
-Emissions Level Tier 4B maintain chassis height with nearly
-Rated Power 210 hp rated* zero rear height change and heavy-
-Displacement 411 cu. In. (6.7 L) duty rotational dampers.
-Num. Cylinders 6 -Independent rear axle suspension
-Aspiration Turbocharged -Hay Only - Heavy-duty 120 in.
-Pre-cleaning Top Spin™ ** adjustable rear axle with forked arm
-Intercooling Air-to-Air support and 14L x 16.1 8 PR rear
-Fuel System tires
-High-pressure common rail -Draper Ready - high clearance 135 in.
-Electronic fuel injection adjustable rear with forked arm
support and 14L x 16.1 8 PR rear
* Manufacturer's rating per ECE R120 / tires
ISO 14396 -Optional cast single arm support with
** TOPSPIN™ is a registered trademark 16.5L x 16.1 RP rear tires (Standard
of the Donaldson Company, Inc. on Prairie Special Configuration)
EMISSIONS SYSTEM DRIVELINE
-EcoBlue™ HI-eSCR high-efficiency -Two speed range hydrostatic drive
Selective Catalytic Reduction with -Apx. top speed of 18 MPH
engine exhaust muffler / SCR -HD double reduction planetary
final drives
COOLING SYSTEM -Spring applied, hydraulically released
-High-efficiency, multi-layer cooling park brake (console switch controlled)
-High-capacity rotary screen cleaning
system. STEERING SYSTEM
-Chaff wiper kit -2000 psi hydraulic steering system
-Vertical opening rotary air screen with dedicated pump and load
reactive steering provides operator
ELECTRICAL SYSTEM feedback and optimized straight line
-Voltage 12-Volt tracking.
-Alternator 150 amp
-Battery CCA 650 CCA HEAD DRIVE
-Battery Type Low maintenance -Hay Only - Variable displacement 80
-Num. Batteries 2 GPM head drive pump
-Advanced power management
FUEL/DEF CAPACITIES system for Durabine™ disc heads
-Diesel Fuel 120-gallon (454 L) -Draper Ready - Variable displacement
-DEF Fluid 19-gallon (72 L) twin 40 GPM head drive pumps
-Dedicated knife drive (High PSI)
-Dedicated canvas & reel drive
(Low PSI)
Page 83
-HT2W 02
SPEEDROWER® 220 SP WINDROWER
US PRICE LIST
-HT2W 02 0034 000 01-SEP-17 Page 82 of 160
(Grand Island, NE)
Standard Equipment
HEAD ATTACHMENT -Lumbar adjustment
-Variable speed hydrostatic head -Ride dampener adjustment
drive, less head drive motor -Retractable seat belt
-Hydraulic poppet couplers for head -Operator’s Presence System
drive motor attachment for Draper -Instructor's seat with seat belt
Ready units only. -Front windshield wiper/washer
-Threaded fittings to hard plumb Disc -Climate systems
Heads for head drive motor -Air-conditioner and heater with
Attachment (Hay units only) manual temperature controls
-Independent RH/LH hydraulic head -Dual cab air filtration system:
flotation -(1) External fresh air filter
-Hydraulic head tilt -(1) In-cab air recirculation filter
-In-cab & remote control switches -Cab interior lighting package
-Electronic tilt indicator displayed -(1) Center dome light
on 4-line display and Intelliview™ IV -(1) Right-hand console light
equipped windrowers. -Entertainment & communications
-Tilt indicator on the tilt cylinder -AM/FM/weather band Radio with
-8" stroke head tilt cylinder antenna and two speakers.
-Single lever head transport lock -Auxiliary input socket for MP3 player,
system satellite radio or portable CD player
-Standard head latch system -(2) Additional radio port locations
-Large diameter (2.75") head lift with DIN mounting slots
cylinders -Business band antenna ready
-Front windshield wiper/washer
WINDROW SHIELDS -(2) External mount rear view mirrors
-Manual adjust hay windrow shields (mechanical adjust)
(Non-draper Machines Only) -(1) In-cab rearview mirror
-Fixed windrow shields -(2) 12-volt auxiliary power outlets
(Draper Machines Only) -Electronic Service Tool diagnostic
WEIGHTING AND BALLASTING port
-Less chassis ballast; order ballast
as appropriate for attached head(s) ENGINE SHIELDS
-Sheet molded compound side shields
STANDARD CAB -Easy-open gas strut supported
-Comfort Ride™ cab suspension and
air-ride rear axle suspension MULTI-FUNCTION HANDLE
-Curved, tinted glass with left-hand -CommandGrip™ MFH with low-effort
entry door forward-neutral-reverse ground
-Adjustable tilt/telescopic steering speed control with back lighting.
column -Haying MFH: Short stock without
-Fore/Aft adjustable console with cup palm rest and hay specific operation
holder, lighter & ashtray decal affixed to right cab window.
-Deluxe fabric-covered seating -Draper MFH: Traditional tall stalk
-Air-suspension design with palm rest, and hay
-Fore/aft isolator specific operational decal decal
Page 84
-HT2W 02
SPEEDROWER® 220 SP WINDROWER
US PRICE LIST
-HT2W 02 0034 000 01-SEP-17 Page 83 of 160
(Grand Island, NE)
Standard Equipment
affixed to right cab window. TECHNOLOGY FEATURES
-MFH Controls for: -Advanced Power Management System
-Performance monitor display -RoadCruise™ Transport mode
selection -PLM™ Precision Land Management
-Head raise/lower IntelliSteer™ auto guidance ready
-Head tilt control
-Auto guidance engagement ENGINE SHUTDOWN PROTECTION:
-Reel speed (draper head) -Automatic engine shutdown
-Reel raise/lower (draper head) -Low engine oil pressure
-Reel fore/aft (draper head) -Engine coolant overheat
-Head cut height (draper head) -Low hydrostatic charge oil pressure
-Head lateral tilt (draper head)
-Return to cut (draper head) TRANSPORT LIGHTING
-(2) Halogen, cab roof-mounted
RIGHT-HAND CONSOLE CONTROLS transport lights
-Engine speed -(2) Combination rear tail light/brake
-Head engagement lights
-Head power reverser -(2) Combination turn signal/flashing
-Head flotation adjustment hazard lights
-Park brake control
-Cold start (when equipped) WORK LIGHTING
-DuraMerger™ attachment control -(4) Halogen, cab roof-mounted work
(when equipped) lights
-(2) Halogen, rear work lights
MONITORS AND DISPLAYS -(2) Halogen, stubble lights
-Console mounted, adjustable displays -Time delay cab exit light
& monitors -12 volt, service light receptacle
-Standard monitor: 4-Line, TS-Ready
for Auto Guidance Ready units WARRANTY
-Optional: 4-Line display for Non-Auto New Holland Standard Warranty
Guidance Ready, OR IntelliView™ IV, Applies
10 inch color touch screen display
-Monitored systems
-Engine oil pressure
-Engine coolant temperature
-Engine rpm
-Battery voltage
-Ground speed
-Diesel fuel & DEF fluid levels
-Engine/head hours
-Hydrostatic transmission charge
oil pressure
Page 85
-HT2W 02
SPEEDROWER® 220 SP WINDROWER
US PRICE LIST
-HT2W 02 0034 000 01-SEP-17 Page 84 of 160
(Grand Island, NE)
Standard Equipment
HIGH VALUE OPTIONS & PACKAGES down
-Deluxe cab upgrade includes -AutoGuide Omnistar
-Automatic temperature controls -Factory IntelliSteer™ auto guidance
-Deluxe satellite radio w/ bluetooth complete
connectivity -OmniStar® correction signal unlocked
-Two (2) additional radio speakers (+/- 3 to 5 inch accuracy)
(4 radio speakers in total) -IntelliView™ IV color touch screen
-Front/rear sun shades display
-Additional noise suppression -Navigation Controller III
-New Holland 372 GNSS Receiver
-Prairie Special draper configuration
includes the following options:
-Auto Guidance Ready with 4-line
display/TS Ready -AutoGuide WAAS
-Deluxe cab package -Factory IntelliSteer™ auto guidance
-Extra wide 135 inch adjustable rear complete
draper axle -WAAS correction signal (+/- 6 to 8
-Cold weather package inch accuracy)
-600/65R28 R1W drive tires -IntelliView™ IV color touch screen
-High clearance single arm display
tail wheel with 16.5L tires -Navigation Controller III
-Fixed deflector shields (Draper) -New Holland 372 GNSS Receiver
-Head quick latch (Draper)
-Prairie Special logo decal
-Speedrower 220 Hay
-Auto Guidance Ready with 4-line
display/TS Ready
-Deluxe cab package
-Deluxe mirrors
-Cold weather package
-21L x 28 14 PR R4 drive tires
-High clearance single arm
tail wheel with 16.5L tires
-Poppet Style Couplers for disc
heads
-Manual deflector shields (Hay)
-Header quick latch (Hay)
-High road speed with power
Page 86
-HT2W 02
SPEEDROWER® 220 SP WINDROWER
US PRICE LIST
-HT2W 02 0034 000 01-SEP-17 Page 85 of 160
(Grand Island, NE)
Models
COMMERCIAL MODEL ENGINE POWER Weight Factory Data List Price
SPEEDROWER_220 220 HP 14,000 LB 9108974P25 $141,525.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_16066 WHEELS AND TIRES 8019008 No Front Tires/Wheels No Charge
8092907 18.4 x 26 12PR R4 9003718P33 $4,829.00
8091907 480/80R26 149 R3 9003899P28 $5,064.00
8087907 18.4 x R26 150 R1 9004312P00 $5,600.00
8089907 21L x 28 14PR R4 9004597P67 $5,971.00
8001407 600/65R28 154 R1W 9005259P10 $6,830.00
8088907 580/70R26 149 R3 9005554P78 $7,214.00
SD_H6202 REAR TIRE - WHEEL SUPPORT
727103 Forked/14L w/Damper
Standard-Clearance, 3° forked arm caster assemblies with
heavy-duty rotational dampers and 14L x 16.1 tires & wheels
maintain chassis height with near zero rear height change when
reversing.
No Charge
726904 Single/16.5L w/Damper
High-Clearance, 3°single arm caster assemblies and heavy-duty
rotational dampers with 16.5L x 16.1 tires maintain chassis height
with near zero rear height change when reversing.
9001332P87 $1,731.00
HAYTOOLS TIRES AND WHEELS
DRIVE TIRES
REAR TIRES
Page 87
-HT2W 02
SPEEDROWER® 220 SP WINDROWER
US PRICE LIST
-HT2W 02 0034 000 01-SEP-17 Page 86 of 160
(Grand Island, NE)
SD_06037 REAR LIGHTS
726890 Deluxe LED Rear Light Package
Upgrade provides two (2) forward-facing LED stubble lights and
two (2) rear-facing LED stubble lights.
9001132P67 $1,471.00
SD_06075 FRONT LIGHTS
726888 Deluxe LED Front Light Package
Upgrade provides two (2) forward-facing halogen road transport
lights and four (4) high-intensity LED field lights.
9001213P52 $1,576.00
SD_H5807 DRAPER HEADER ADAPTER
726907 Draper Ready
Includes single and double swath delivery capabilities, tandem
EDC header drive pumps, lift arm position sensors, fixed
position crop deflectors and header quick latch system.
For Hay operation order windrow forming shield from
the DIA section part # 87473378
REQUIRED for Durabine™ disc head operation – Order Hydraulic
Cross over kit option with new disc headers #439139 or source
kit through NH Parts for heads already in service(PN. 47522054).
(Speedrower 220/260 Draper Ready units are only available
with 600, 580, & 21L size front drive tires)
9007381P22 $9,586.00
SD_H6203 HEADER Q-A SYSTEM
726957 Header Quick Latch-Non Draper
Lever operated quick release system for header attachment locks.
9000097P79 $127.00
726985 Header Quick Latch - Draper
Lever operated quick release system for header attachment locks.
9000097P79 $127.00
SD_02024 COLD WEATHER PKG
761159 Cold Weather Package 9000377P30 $490.00
FACTORY SUPPLIED OPTIONS
LIGHT KITS
ADAPTER PACKAGES
ENGINE GROUP
Page 88
-HT2W 02 0034 000 01-SEP-17 Page 87 of 160
-HT2W 02
SPEEDROWER® 220 SP WINDROWER
US PRICE LIST
(Grand Island, NE)
SD_N6424 SPEED OPTION
726777 Std Road Speed w/o Power Down
Two-speed hydrostatic drive, WITHOUT header lift arm power
down. TOP SPEED APPROXIMATELY 18 MPH
No Charge
726990 Std Road Speed with Power Down
Two-speed hydrostatic drive, WITH header lift arm power down.
TOP SPEED APPROXIMATELY 18 MPH
9000235P62 $306.00
726778 High Road Speed w/Power Dn
Three-speed hydrostatic drive, WITH header lift arm power down.
TOP SPEED APPROXIMATELY 24 MPH
9002120P58 $2,754.00
SD_05009 CAB
725843 Deluxe Cab Upgrade
Deluxe Cab Upgrade includes front and rear sunscreens, automatic
temperature controls, additional integrated sound suppression
materials, four speakers, and Bluetooth/Satellite/CD/USB Radio
with auxiliary input jack.
9002391P62 $3,106.00
SD_05072 MIRROR
725972 Deluxe Mirrors
Electrically adjustable mirrors from headliner mounted switch.
9000571P34 $742.00
SD_21014 CAMERAS
439110 Rear Camera Kit
REQUIRES Intelliview™IV or 4-line Display with T/S Ready Option
where display is moved from another vehicle. Kit contains one (1)
rear-facing camera and harness to connect to Intelliview IV display
only. System capacity of up to three (3) cameras, additional
cameras sold separately.
9000687P61 $893.00
SD_25003 CAB DISPLAY MONITOR
726992 4-Line Display, T-S Ready
Fixed top-line with Engine RPM & Ground Speed. Bottom three
(3) lines are customizable to operator preference. REQUIRED with
Auto Guidance Ready Configurations; also provides mounting
bracket and wiring harness to connect IntelliView™IV display
moved from another vehicle into the windrower.
No Charge
726894 Large Color Touch Screen Disp.
Factory installed and tested IntelliView™IV 10-inch color touch
-screen display with factory integrated vehicle controls and auto-
guidance software.
REQUIRED with Auto Guidance Complete Configurations
9003328P71 $4,323.00
TRANSMISSION GROUP
CAB GROUP
Page 89
-HT2W 02 0034 000 01-SEP-17 Page 88 of 160
-HT2W 02
SPEEDROWER® 220 SP WINDROWER
US PRICE LIST
(Grand Island, NE)
726893 4-Line Display
Fixed top-line with Engine RPM & Ground Speed. Bottom three
(3) lines are customizable to operator preference. NON-Auto
Guidance Ready Configurations ONLY.
(900170P94) ($222.00)
SD_25010 DISPLAY
726908 Cab A-Pillar Display
NOT COMPATIBLE with IntelliView™IV touch-screen display,
provides additional warning lights and gauges to complement
4-line display equipped windrowers.
9000492P80 $640.00
SD_N6393 SEATS
726892 Leather Seats
Operator’s seat with air-suspension, leather-covered with comfort
heating and folding leather covered instructor’s seat.
9001114P96 $1,448.00
SD_09001 AUX HYD PUMP & CONTROL VALVE
726611 Auxiliary Hydraulic for DWA
REQUIRED for use with DuraMerger™419 Crop Merging
Attachment.
(NOT COMPATIBLE with Hydraulic Reel Drive Kit.)
9001259P72 $1,636.00
SD_09002 AUX HYD PUMP AND CONTROL VALVE
725998 Gear Pump and Control Valve
DRAPER READY UNITS ONLY! REQUIRED when Hydraulic Reel
Drive Kit #716961046 is installed on HS series headers.
9001121P89 $1,457.00
SD_H5406 POPPET STYLE QUICK COUPLER
439058 Poppet Style Couplers-SPW-Disc
FOR USE WITH DISC HEADS ONLY: Includes poppet style quick
couplers for frequent coupling of disc heads and windrowers.
9000352P66 $458.00
XH5406X No Poppet Style Quick Coupler
Includes standard hard-plumb threaded header connections for
infrequent header and windrower coupling.
No Charge
HYDRAULICS GROUP
Page 90
-HT2W 02 0034 000 01-SEP-17 Page 89 of 160
-HT2W 02
SPEEDROWER® 220 SP WINDROWER
US PRICE LIST
(Grand Island, NE)
SD_H5407 TRANSPORT BALLAST BOX
439106 Transport Ballast Box
Provides front ballast REQUIRED when transporting/driving a
windrower without a head. Customizable ballast box matches the
weight of removed head for proper ballasting. Dealer assembly
required of bolt-together ballast box and the addition of specific
concrete amounts. See ballast chart for required concrete
amounts.
NOT COMPATIBLE WITH 4-CY NON-DRAPER
9002380P07 $3,091.00
SD_H5408 RR BALLAST HANGAR KI
439128 Rear Ballast Hangar Kit
Rear ballast hanger provides a rear weight bracket for use with
100 pound suitcase weights PN:718215036 when rear ballast
recommendations exceed the ballast box capacity.
REQUIRED: Duraswath™ 436HB and 440HB draper heads
175 LB 9000934P78 $1,214.00
SD_T4980 BALLAST PACKAGE
727105 200 lbs. - Ballast Kit
SR160-4CY Draper & Haybine® HS18 Header
SR220-6CY L-HP, Durabine™ 416, & Duramerger™ 419
SR260-6CY H-HP & Durabine™ 416
200 LB 9000190P96 $248.00
727106 400 lbs. - Ballast Kit
SR160-4CY Non-Draper & Haybine® HS16 Header
SR220-6CY L-HP & Durabine™ 416
SR220-6CY L-HP & DuraSwath™425HB
SR260-6CY H-HP, DuraMerger™419, & Durabine™ 419 Header
400 LB 9000383P46 $498.00
727178 600 lbs. - Ballast Kit
SR160-4CY Non-Draper & Haybine® HS18 Header
SR160-4CY Draper, DuraSwath™425HB
SR220-6CY L-HP, DuraSwath™425HB
SR260-6CY H-HP & Durabine™ 419
600 LB 9000574P42 $746.00
727107 800 lbs. - Ballast Kit
-Not recommended for Tier 4b Speedrower® Models
800 LB 9000767P69 $997.00
727179 1200 lbs. - Ballast Kit
SR260-6CY H-HP Draper & Duraswath™ 430HB Header
1200 LB 9001150P38 $1,494.00
727109 1400 lbs. - Ballast Kit
SR160-4CY Draper & Duraswath™ 430HB Header
SR220-6CY L-HP Draper & Duraswath™ 430HB Header
1400 LB 9001342P11 $1,743.00
WEIGHT GROUP
Page 91
-HT2W 02 0034 000 01-SEP-17 Page 90 of 160
-HT2W 02
SPEEDROWER® 220 SP WINDROWER
US PRICE LIST
(Grand Island, NE)
727110 1600 lbs. - Ballast Kit
-Duraswath™ 436HB and 440HB Draper Headers require
maximum ballast capacity and additional Rear Ballast Hanger
Wholegoods Kit #439128 (175 lbs.) and additional suitcase
weights PN. 718215036 (100 lbs. each) sourced from CNH
Industrial Parts & Service.
1600 LB 9001535P38 $1,994.00
XT4980X Standard No Ballast Package
SR160-4CY Non-Draper & Haybine® HS14 Header
SR160-4CY Draper & Haybine® HS14, HS16, HS18 Heads
SR220-6CY L-HP & Haybine® HS16 and HS18 Heads
SR260-6CY H-HP & Haybine® HS16 & HS18 Heads
SR260-6CY H-HP, DuraMerger™419, & Durabine™ 416 Header
0 LB No Charge
SD_27047 AUTOGUIDANCE
726897 AutoGuidance Ready
INCLUDED IN BASE:
1- All Cab and Chassis wiring, including wiring connection to
IntelliView™IV touch screen display
2- Electrohydraulic auto-guidance steering valve
3- Mounting provisions for Navigation Controller & GPS 372
Receiver
TO COMPLETE FACTORY EQUIPPED AUTO GUIDANCE ORDER:
1- IntelliView™IV Large Color Touch Screen Display
2- GPS Receiver (WAAS or OmniSTAR Accuracy)
3- Navigation Controller II
No Charge
727063 No AutoGuidance Ready (903377P22) ($4,386.00)
SD_27060 GPS RECEIVER
X27060X No GPS Receiver No Charge
726994 GPS 372 Receiver - WAAS
Factory Installed - Narrow / Wide Band NH372 Receiver
WAAS Accuracy
9002548P70 $3,310.00
726995 GPS 372 Receiver - OMNISTAR
Factory Installed - Narrow / Wide Band NH372 Receiver
OmniSTAR Accuracy Unlock
9004512P20 $5,860.00
SD_27061 NAV CONTROLLER
X27061X No NAV Controller No Charge
726997 NAV Controller
Factory Installed Auto Guidance Navigation III Controller
9004248P09 $5,517.00
AUTOGUIDANCE
Page 92
-HT2W 02 0034 000 01-SEP-17 Page 91 of 160
-HT2W 02
SPEEDROWER® 220 SP WINDROWER
US PRICE LIST
(Grand Island, NE)
SD_H5409 TELEMATICS KIT
439129 Telematics Kit
PLM™ CONNECT – Factory supplied/Dealer Installed option kit
REQUIRES Intelliview™IV Display, annual PLM Connect
subscription, and dealer setup of customer access to PLM
CONNECT customer dashboard site.
Contact CNH Industrial Parts & Service for pricing and full list of
available subscriptions, PLM Connect service level information,
and cellular network coverage.
9001044P12 $1,356.00
SD_47083 OPERATOR'S MANUAL
439130 English Lang Manual No Charge
715294 French Canadian No Charge
715309 Spanish Manual - NA No Charge
X47083X No Additional Operators Manual No Charge
SD_05143 REMOTE WINDROW SHIELD CONTROL
717131 Remote Windrow Shield Control
Provides in cab electrical adjustment of swath forming shields.
(CANNOT be used with fixed shields on draper-ready units.)
9001188P88 $1,544.00
SD_20107 HYDRAULIC REEL DRIVE
716961 Hydraulic Reel Drive Kit
FOR USE WITH HS SERIES SMC HEADS ONLY: Also requires
engine mounted auxiliary hydraulic pump with control valve
(Draper or Non-draper Configurations) and HS header reel drive
DIA# 716961076 installed on head.
9000483P56 $628.00
SD_45036 SICKLE HEADER ADAPT
716965 Sickle Header Adaptor Kit
REQUIRED FOR HS SICKLE HEAD OPERATION
Includes header drive motor and hoses with poppet style quick
couplers.
9001137P29 $1,477.00
OTHER
LANGUAGE KITS
FIELD INSTALLED HEADER COMPLETING PACKAGES
FOR SHIPMENT WITH BASE UNIT ONLY
Page 93
-HT2W 03
SPEEDROWER® 260 SP WINDROWER
US PRICE LIST
-HT2W 03 0034 000 01-SEP-17 Page 92 of 160
(Grand Island, NE)
Standard Equipment
ENGINE CHASSIS & REAR AXLE
-Engine MFG FPT/New Holland -Rear axle 3° caster post swivels
-Emissions Level Tier 4B maintain chassis height with nearly
-Rated Power 250 hp rated* zero rear height change and heavy-
-Displacement 411 cu. In. (6.7 L) duty rotational dampers.
-Num. Cylinders 6 -Independent rear axle suspension
-Aspiration Turbocharged -Hay Only - Heavy-duty 120 in.
-Pre-cleaning Top Spin™ ** adjustable rear axle with forked arm
-Intercooling Air-to-Air support and 14L x 16.1 8 PR rear
-Fuel System tires
-High-pressure common rail -Draper Ready - high clearance 135 in.
-Electronic fuel injection adjustable rear with forked arm
support and 14L x 16.1 8 PR rear
* Manufacturer's rating per ECE R120 / tires
ISO 14396 -Optional cast single arm support with
** TOPSPIN™ is a registered trademark 16.5L x 16.1 RP rear tires (Standard
of the Donaldson Company, Inc. on Prairie Special Configuration)
EMISSIONS SYSTEM DRIVELINE
-EcoBlue™ HI-eSCR high-efficiency -Two speed range hydrostatic drive
Selective Catalytic Reduction with -Apx. top speed of 18 MPH
engine exhaust muffler / SCR -HD double reduction planetary
final drives
COOLING SYSTEM -Spring applied, hydraulically released
-High-efficiency, multi-layer cooling park brake (console switch controlled)
-High-capacity rotary screen cleaning
system. STEERING SYSTEM
-Chaff wiper kit -2000 psi hydraulic steering system
-Vertical opening rotary air screen with dedicated pump and load
reactive steering provides operator
ELECTRICAL SYSTEM feedback and optimized straight line
-Voltage 12-Volt tracking.
-Alternator 150 amp
-Battery CCA 650 CCA HEAD DRIVE
-Battery Type Low maintenance Hay Only - Variable displacement 80
-Num. Batteries 2 GPM head drive pump
-Advanced power management
FUEL/DEF CAPACITIES system for Durabine™ disc heads
-Diesel Fuel 120-gallon (454 L) -Draper Ready - Variable displacement
-DEF Fluid 19-gallon (72 L) twin 40 GPM head drive pumps
-Dedicated knife drive (High PSI)
-Dedicated canvas & reel drive
(Low PSI)
Page 94
-HT2W 03
SPEEDROWER® 260 SP WINDROWER
US PRICE LIST
-HT2W 03 0034 000 01-SEP-17 Page 93 of 160
(Grand Island, NE)
Standard Equipment
HEAD ATTACHMENT -Lumbar adjustment
-Variable speed hydrostatic head -Ride dampener adjustment
drive, less head drive motor -Retractable seat belt
-Hydraulic poppet couplers for head -Operator’s Presence System
drive motor attachment for Draper -Instructor's seat with seat belt
Ready units only. -Front windshield wiper/washer
-Threaded fittings to hard plumb Disc -Climate systems
Heads for head drive motor -Air-conditioner and heater with
Attachment (Hay units only) manual temperature controls
-Independent RH/LH hydraulic head -Dual cab air filtration system:
flotation -(1) External fresh air filter
-Hydraulic head tilt -(1) In-cab air recirculation filter
-In-cab & remote control switches -Cab interior lighting package
-Electronic tilt indicator displayed -(1) Center dome light
on 4-line display and Intelliview™ IV -(1) Right-hand console light
equipped windrowers. -Entertainment & communications
-Tilt indicator on the tilt cylinder -AM/FM/weather band Radio with
-8" stroke head tilt cylinder antenna and two speakers.
-Single lever head transport lock -Auxiliary input socket for MP3 player,
system satellite radio or portable CD player
-Standard head latch system -(2) Additional radio port locations
-Large diameter (2.75") head lift with DIN mounting slots
cylinders -Business band antenna ready
-Front windshield wiper/washer
WINDROW SHIELDS -(2) External mount rear view mirrors
-Manual adjust hay windrow shields (mechanical adjust)
(Non-draper Machines Only) -(1) In-cab rearview mirror
-Fixed windrow shields -(2) 12-volt auxiliary power outlets
(Draper Machines Only) -Electronic Service Tool diagnostic
WEIGHTING AND BALLASTING port
-Less chassis ballast; order ballast
as appropriate for attached head(s) ENGINE SHIELDS
-Sheet molded compound side shields
STANDARD CAB -Easy-open gas strut supported
-Comfort Ride™ cab suspension and
air-ride rear axle suspension MULTI-FUNCTION HANDLE
-Curved, tinted glass with left-hand -CommandGrip™ MFH with low-effort
entry door forward-neutral-reverse ground
-Adjustable tilt/telescopic steering speed control with back lighting.
column -Haying MFH: Short stock without
-Fore/Aft adjustable console with cup palm rest and hay specific operation
holder, lighter & ashtray decal affixed to right cab window.
-Deluxe fabric-covered seating -Draper MFH: Traditional tall stalk
-Air-suspension design with palm rest, and hay
-Fore/aft isolator specific operational decal decal
Page 95
-HT2W 03
SPEEDROWER® 260 SP WINDROWER
US PRICE LIST
-HT2W 03 0034 000 01-SEP-17 Page 94 of 160
(Grand Island, NE)
Standard Equipment
affixed to right cab window. TECHNOLOGY FEATURES
-MFH Controls for: -Advanced Power Management System
-Performance monitor display -RoadCruise™ Transport mode
selection -PLM™ Precision Land Management
-Head raise/lower IntelliSteer™ auto guidance ready
-Head tilt control
-Auto guidance engagement ENGINE SHUTDOWN PROTECTION:
-Reel speed (draper head) -Automatic engine shutdown
-Reel raise/lower (draper head) -Low engine oil pressure
-Reel fore/aft (draper head) -Engine coolant overheat
-Head cut height (draper head) -Low hydrostatic charge oil pressure
-Head lateral tilt (draper head)
-Return to cut (draper head) TRANSPORT LIGHTING
-(2) Halogen, cab roof-mounted
RIGHT-HAND CONSOLE CONTROLS transport lights
-Engine speed -(2) Combination rear tail light/brake
-Head engagement lights
-Head power reverser -(2) Combination turn signal/flashing
-Head flotation adjustment hazard lights
-Park brake control
-Cold start (when equipped) WORK LIGHTING
-DuraMerger™ attachment control -(4) Halogen, cab roof-mounted work
(when equipped) lights
-(2) Halogen, rear work lights
MONITORS AND DISPLAYS -(2) Halogen, stubble lights
-Console mounted, adjustable displays -Time delay cab exit light
& monitors -12 volt, service light receptacle
-Standard monitor: 4-Line, TS-Ready
for Auto Guidance Ready units WARRANTY
-Optional: 4-Line display for Non-Auto New Holland Standard Warranty
Guidance Ready, OR IntelliView™ IV, Applies
10 inch color touch screen display
-Monitored systems
-Engine oil pressure
-Engine coolant temperature
-Engine rpm
-Battery voltage
-Ground speed
-Diesel fuel & DEF fluid levels
-Engine/head hours
-Hydrostatic transmission charge
oil pressure
Page 96
-HT2W 03
SPEEDROWER® 260 SP WINDROWER
US PRICE LIST
-HT2W 03 0034 000 01-SEP-17 Page 95 of 160
(Grand Island, NE)
Standard Equipment
HIGH VALUE OPTIONS & PACKAGES
-Deluxe cab upgrade includes -AutoGuide Omnistar
-Automatic temperature controls -Factory IntelliSteer™ auto guidance
-Deluxe satellite radio w/ bluetooth complete
connectivity -OmniStar® correction signal unlocked
-Two (2) additional radio speakers (+/- 3 to 5 inch accuracy)
(4 radio speakers in total) -IntelliView™ IV color touch screen
-Front/rear sun shades display
-Additional noise suppression -Navigation Controller III
-New Holland 372 GNSS Receiver
-Prairie Special draper configuration
includes the following options: -AutoGuide WAAS
-Auto Guidance Ready with 4-line -Factory IntelliSteer™ auto guidance
display/TS Ready complete
-Deluxe cab package -WAAS correction signal (+/- 6 to 8
-Extra wide 135 inch adjustable rear inch accuracy)
draper axle -IntelliView™ IV color touch screen
-Cold weather package display
-600/65R28 R1W drive tires -Navigation Controller III
-High clearance single arm -New Holland 372 GNSS Receiver
tail wheel with 16.5L tires
-Fixed deflector shields (Draper)
-Head quick latch (Draper)
-Prairie Special logo decal
-Speedrower 260 Hay
-Auto Guidance Ready with 4-line
display/TS Ready
-Deluxe cab package
-Deluxe mirrors
-Cold weather package
-580/70R26 drive tires
-High clearance single arm
tail wheel with 16.5L tires
-Poppet Style Couplers for disc
heads
-Manual deflector shields (Hay)
-Header quick latch (Hay)
-High road speed with power
down
Page 97
-HT2W 03
SPEEDROWER® 260 SP WINDROWER
US PRICE LIST
-HT2W 03 0034 000 01-SEP-17 Page 96 of 160
(Grand Island, NE)
Models
COMMERCIAL MODEL ENGINE POWER Weight Factory Data List Price
SPEEDROWER_260 260HP 14,000 LB 9114246P44 $148,372.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_16066 WHEELS AND TIRES 8019008 No Front Tires/Wheels No Charge
8092907 18.4 x 26 12PR R4 9003718P33 $4,829.00
8091907 480/80R26 149 R3 9003899P28 $5,064.00
8087907 18.4 x R26 150 R1 9004312P00 $5,600.00
8089907 21L x 28 14PR R4 9004597P67 $5,971.00
8001407 600/65R28 154 R1W 9005259P10 $6,830.00
8088907 580/70R26 149 R3 9005554P78 $7,214.00
SD_H6202 REAR TIRE - WHEEL SUPPORT
727103 Forked/14L w/Damper
Standard-Clearance, 3° forked arm caster assemblies with
heavy-duty rotational dampers and 14L x 16.1 tires & wheels
maintain chassis height with near zero rear height change when
reversing.
No Charge
726904 Single/16.5L w/Damper
High-Clearance, 3°single arm caster assemblies and heavy-duty
rotational dampers with 16.5L x 16.1 tires maintain chassis height
with near zero rear height change when reversing.
9001332P87 $1,731.00
HAYTOOLS TIRES AND WHEELS
DRIVE TIRES
REAR TIRES
Page 98
-HT2W 03
SPEEDROWER® 260 SP WINDROWER
US PRICE LIST
-HT2W 03 0034 000 01-SEP-17 Page 97 of 160
(Grand Island, NE)
SD_06037 REAR LIGHTS
726890 Deluxe LED Rear Light Package
Upgrade provides two (2) forward-facing LED stubble lights and
two (2) rear-facing LED stubble lights.
9001132P67 $1,471.00
SD_06075 FRONT LIGHTS
726888 Deluxe LED Front Light Package
Upgrade provides two (2) forward-facing halogen road transport
lights and four (4) high-intensity LED field lights.
9001213P52 $1,576.00
SD_H5807 DRAPER HEADER ADAPTER
726907 Draper Ready
Includes single and double swath delivery capabilities, tandem
EDC header drive pumps, lift arm position sensors, fixed
position crop deflectors and header quick latch system.
For Hay operation order windrow forming shield from
the DIA section part # 87473378
REQUIRED for Durabine™ disc head operation – Order Hydraulic
Cross over kit option with new disc headers #439139 or source
kit through NH Parts for heads already in service(PN. 47522054).
(Speedrower 220/260 Draper Ready units are only available
with 600, 580, & 21L size front drive tires)
9007381P22 $9,586.00
SD_H6203 HEADER Q-A SYSTEM
726957 Header Quick Latch-Non Draper
Lever operated quick release system for header attachment locks.
9000097P79 $127.00
726985 Header Quick Latch - Draper
Lever operated quick release system for header attachment locks.
9000097P79 $127.00
SD_02024 COLD WEATHER PKG
761159 Cold Weather Package 9000377P30 $490.00
FACTORY SUPPLIED OPTIONS
LIGHT KITS
ADAPTER PACKAGES
ENGINE GROUP
Page 99
-HT2W 03 0034 000 01-SEP-17 Page 98 of 160
-HT2W 03
SPEEDROWER® 260 SP WINDROWER
US PRICE LIST
(Grand Island, NE)
SD_N6424 SPEED OPTION
726777 Std Road Speed w/o Power Down
Two-speed hydrostatic drive, WITHOUT header lift arm power
down. TOP SPEED APPROXIMATELY 18 MPH
No Charge
726990 Std Road Speed with Power Down
Two-speed hydrostatic drive, WITH header lift arm power down.
TOP SPEED APPROXIMATELY 18 MPH
9000235P62 $306.00
726778 High Road Speed w/Power Dn
Three-speed hydrostatic drive, WITH header lift arm power down.
TOP SPEED APPROXIMATELY 24 MPH
9002120P58 $2,754.00
SD_05009 CAB
725843 Deluxe Cab Upgrade
Deluxe Cab Upgrade includes front and rear sunscreens, automatic
temperature controls, additional integrated sound suppression
materials, four speakers, and Bluetooth/Satellite/CD/USB Radio
with auxiliary input jack.
9002391P62 $3,106.00
SD_05072 MIRROR
725972 Deluxe Mirrors
Electrically adjustable mirrors from headliner mounted switch.
9000571P34 $742.00
SD_21014 CAMERAS
439110 Rear Camera Kit
REQUIRES Intelliview™IV or 4-line Display with T/S Ready Option
where display is moved from another vehicle. Kit contains one (1)
rear-facing camera and harness to connect to Intelliview IV display
only. System capacity of up to three (3) cameras, additional
cameras sold separately.
9000687P61 $893.00
SD_25003 CAB DISPLAY MONITOR
726992 4-Line Display, T-S Ready
Fixed top-line with Engine RPM & Ground Speed. Bottom three
(3) lines are customizable to operator preference. REQUIRED with
Auto Guidance Ready Configurations; also provides mounting
bracket and wiring harness to connect IntelliView™IV display
moved from another vehicle into the windrower.
No Charge
726894 Large Color Touch Screen Disp.
Factory installed and tested IntelliView™IV 10-inch color touch
-screen display with factory integrated vehicle controls and auto-
guidance software.
REQUIRED with Auto Guidance Complete Configurations
9003328P71 $4,323.00
TRANSMISSION GROUP
CAB GROUP
Page 100
-HT2W 03 0034 000 01-SEP-17 Page 99 of 160
-HT2W 03
SPEEDROWER® 260 SP WINDROWER
US PRICE LIST
(Grand Island, NE)
726893 4-Line Display
Fixed top-line with Engine RPM & Ground Speed. Bottom three
(3) lines are customizable to operator preference. NON-Auto
Guidance Ready Configurations ONLY.
(900170P94) ($222.00)
SD_25010 DISPLAY
726908 Cab A-Pillar Display
NOT COMPATIBLE with IntelliView™IV touch-screen display,
provides additional warning lights and gauges to complement
4-line display equipped windrowers.
9000492P80 $640.00
SD_N6393 SEATS
726892 Leather Seats
Operator’s seat with air-suspension, leather-covered with comfort
heating and folding leather covered instructor’s seat.
9001114P96 $1,448.00
SD_09001 AUX HYD PUMP & CONTROL VALVE
726611 Auxiliary Hydraulic for DWA
REQUIRED for use with DuraMerger™419 Crop Merging
Attachment.
(NOT COMPATIBLE with Hydraulic Reel Drive Kit.)
9001259P72 $1,636.00
SD_09002 AUX HYD PUMP AND CONTROL VALVE
725998 Gear Pump and Control Valve
DRAPER READY UNITS ONLY! REQUIRED when Hydraulic Reel
Drive Kit #716961046 is installed on HS series headers.
9001121P89 $1,457.00
SD_H5406 POPPET STYLE QUICK COUPLER
439058 Poppet Style Couplers-SPW-Disc
FOR USE WITH DISC HEADS ONLY: Includes poppet style quick
couplers for frequent coupling of disc heads and windrowers.
9000352P66 $458.00
XH5406X No Poppet Style Quick Coupler
Includes standard hard-plumb threaded header connections for
infrequent header and windrower coupling.
No Charge
HYDRAULICS GROUP
Page 101
-HT2W 03 0034 000 01-SEP-17 Page 100 of 160
-HT2W 03
SPEEDROWER® 260 SP WINDROWER
US PRICE LIST
(Grand Island, NE)
SD_H5407 TRANSPORT BALLAST BOX
439106 Transport Ballast Box
Provides front ballast REQUIRED when transporting/driving a
windrower without a head. Customizable ballast box matches the
weight of removed head for proper ballasting. Dealer assembly
required of bolt-together ballast box and the addition of specific
concrete amounts. See ballast chart for required concrete
amounts.
NOT COMPATIBLE WITH 4-CY NON-DRAPER
9002380P07 $3,091.00
SD_H5408 RR BALLAST HANGAR KI
439128 Rear Ballast Hangar Kit
Rear ballast hanger provides a rear weight bracket for use with
100 pound suitcase weights PN:718215036 when rear ballast
recommendations exceed the ballast box capacity.
REQUIRED: Duraswath™ 436HB and 440HB draper heads
175 LB 9000934P78 $1,214.00
SD_T4980 BALLAST PACKAGE
727105 200 lbs. - Ballast Kit
SR160-4CY Draper & Haybine® HS18 Header
SR220-6CY L-HP, Durabine™ 416, & Duramerger™ 419
SR260-6CY H-HP & Durabine™ 416
200 LB 9000190P96 $248.00
727106 400 lbs. - Ballast Kit
SR160-4CY Non-Draper & Haybine® HS16 Header
SR220-6CY L-HP & Durabine™ 416
SR220-6CY L-HP & DuraSwath™425HB
SR260-6CY H-HP, DuraMerger™419, & Durabine™ 419 Header
400 LB 9000383P46 $498.00
727178 600 lbs. - Ballast Kit
SR160-4CY Non-Draper & Haybine® HS18 Header
SR160-4CY Draper, DuraSwath™425HB
SR220-6CY L-HP, DuraSwath™425HB
SR260-6CY H-HP & Durabine™ 419
600 LB 9000574P42 $746.00
727107 800 lbs. - Ballast Kit
-Not recommended for Tier 4b Speedrower® Models
800 LB 9000767P69 $997.00
727179 1200 lbs. - Ballast Kit
SR260-6CY H-HP Draper & Duraswath™ 430HB Header
1200 LB 9001150P38 $1,494.00
727109 1400 lbs. - Ballast Kit
SR160-4CY Draper & Duraswath™ 430HB Header
SR220-6CY L-HP Draper & Duraswath™ 430HB Header
1400 LB 9001342P11 $1,743.00
WEIGHT GROUP
Page 102
-HT2W 03 0034 000 01-SEP-17 Page 101 of 160
-HT2W 03
SPEEDROWER® 260 SP WINDROWER
US PRICE LIST
(Grand Island, NE)
727110 1600 lbs. - Ballast Kit
-Duraswath™ 436HB and 440HB Draper Headers require
maximum ballast capacity and additional Rear Ballast Hanger
Wholegoods Kit #439128 (175 lbs.) and additional suitcase
weights PN. 718215036 (100 lbs. each) sourced from CNH
Industrial Parts & Service.
1600 LB 9001535P38 $1,994.00
XT4980X Standard No Ballast Package
SR160-4CY Non-Draper & Haybine® HS14 Header
SR160-4CY Draper & Haybine® HS14, HS16, HS18 Heads
SR220-6CY L-HP & Haybine® HS16 and HS18 Heads
SR260-6CY H-HP & Haybine® HS16 & HS18 Heads
SR260-6CY H-HP, DuraMerger™419, & Durabine™ 416 Header
0 LB No Charge
SD_27047 AUTOGUIDANCE
726897 AutoGuidance Ready
INCLUDED IN BASE:
1- All Cab and Chassis wiring, including wiring connection to
IntelliView™IV touch screen display
2- Electrohydraulic auto-guidance steering valve
3- Mounting provisions for Navigation Controller & GPS 372
Receiver
TO COMPLETE FACTORY EQUIPPED AUTO GUIDANCE ORDER:
1- IntelliView™IV Large Color Touch Screen Display
2- GPS Receiver (WAAS or OmniSTAR Accuracy)
3- Navigation Controller II
No Charge
727063 No AutoGuidance Ready (903377P22) ($4,386.00)
SD_27060 GPS RECEIVER
X27060X No GPS Receiver No Charge
726994 GPS 372 Receiver - WAAS
Factory Installed - Narrow / Wide Band NH372 Receiver
WAAS Accuracy
9002548P70 $3,310.00
726995 GPS 372 Receiver - OMNISTAR
Factory Installed - Narrow / Wide Band NH372 Receiver
OmniSTAR Accuracy Unlock
9004512P20 $5,860.00
SD_27061 NAV CONTROLLER
X27061X No NAV Controller No Charge
726997 NAV Controller
Factory Installed Auto Guidance Navigation III Controller
9004248P09 $5,517.00
AUTOGUIDANCE
Page 103
-HT2W 03 0034 000 01-SEP-17 Page 102 of 160
-HT2W 03
SPEEDROWER® 260 SP WINDROWER
US PRICE LIST
(Grand Island, NE)
SD_H5409 TELEMATICS KIT
439129 Telematics Kit
PLM™ CONNECT – Factory supplied/Dealer Installed option kit
REQUIRES Intelliview™IV Display, annual PLM Connect
subscription, and dealer setup of customer access to PLM
CONNECT customer dashboard site.
Contact CNH Industrial Parts & Service for pricing and full list of
available subscriptions, PLM Connect service level information,
and cellular network coverage.
9001044P12 $1,356.00
SD_47083 OPERATOR'S MANUAL
439130 English Lang Manual No Charge
715294 French Canadian No Charge
715309 Spanish Manual - NA No Charge
X47083X No Additional Operators Manual No Charge
SD_05143 REMOTE WINDROW SHIELD CONTROL
717131 Remote Windrow Shield Control
Provides in cab electrical adjustment of swath forming shields.
(CANNOT be used with fixed shields on draper-ready units.)
9001188P88 $1,544.00
SD_20107 HYDRAULIC REEL DRIVE
716961 Hydraulic Reel Drive Kit
FOR USE WITH HS SERIES SMC HEADS ONLY: Also requires
engine mounted auxiliary hydraulic pump with control valve
(Draper or Non-draper Configurations) and HS header reel drive
DIA# 716961076 installed on head.
9000483P56 $628.00
SD_45036 SICKLE HEADER ADAPT
716965 Sickle Header Adaptor Kit
REQUIRED FOR HS SICKLE HEAD OPERATION
Includes header drive motor and hoses with poppet style quick
couplers.
9001137P29 $1,477.00
OTHER
LANGUAGE KITS
FIELD INSTALLED HEADER COMPLETING PACKAGES
FOR SHIPMENT WITH BASE UNIT ONLY
Page 104
Page 103 of 160
Speedrower® SPW Ballast Requirements
Maximum Ballast Box Capacity for MY15 - MY18 Windrowers- 1600 lbs. (32 weights)
Header Type Sickle Headers Disc Headers Draper Headers
Header Width (ft) 14 16 18 16 19 25 30 36 40
T3, 4-cyl. non-draper (lbs) 200 600 800 T4, 4-cyl. non-draper (lbs) 0 400 600
T3 or T4, 4-cyl draper** (lbs) 0 0 0 600 1400 2300***
T3 or T4, 6-cyl. low-horsepower, non-
draper or draper ready** (lbs)
0
0
400
600
1400
2200***
2600***
T3 or T4, 6-cyl. high-horsepower, non-
draper or draper ready** (lbs)
0
0
200
600
400
1200
2200***
2500***
T3 or T4, 6-cyl. low-horsepower, non-
draper or draper w/merger (lbs)
T3 or T4, 6-cyl. high-horsepower, non-
draper or draper w/merger (lbs)
200
0
400
** Requires lift arm extensions for 14' sickle header on all draper 4-cyl. units, and 16' & 18' sickle header on all
6-cyl. units
*** For Units requiring >1600 lb. of rear ballast, recommend: full ballast box @ 1600 lbs., + additional rear ballast
weight hangar @ 175 lbs., + additional 100 lb. compact tractor suitcase weights as needed
Plate Weight(s) Internal Ballast Box - Order 50 pound plate weights via CNH Industrial Parts & Service PN: 84545478
PN:47848496
PN: 718215036
PN: 47848459
PN: 718215036
PN: 439129006
PN: 718215036
MY 2014 - Ballast Bar Kit
MY 14 SPW ballast hanger kit. Includes hangar, hardware required to attach
hangar, relocate tail lamp assemblies, hardware required to retain suitcase weights,
and weld-on gussets for suspended rear axle models.
100 lb. suitcase weights for rear ballast hanger kit.
MY 2015 - Ballast Bar Kit
MY 15 SPW ballast hanger kit. Includes hangar, hardware required to attach
hangar, hardware required to retain suitcase weights, and weld-on gussets.
100 lb. suitcase weights for rear ballast hanger kit.
MY 2016 - 18 Ballast Bar Kit
MY 16-18 SPW ballast hanger kit. Includes hangar, hardware required to attach
hangar, and hardware required to retain suitcase weights.
100 lb. suitcase weights for rear ballast hanger kit.
MY 2015‐2018 Ballast Bar Kit Without tail lamp assemblies.
MY 2014 Ballast Bar Kit With tail lamp assemblies.
Page 105
-HT2H 01
DURAMERGER 419
US PRICE LIST
-HT2H 01 0034 000 01-SEP-17 Page 104 of 160
(Grand Island, NE)
Standard Equipment
DuraMerger 419 allows you to place two DRIVE PUMP DESCRIPTION
windrows side by side, increasing -Engine-mounted fixed-displacement
forage crop volume for high capacity drive pump
harvesting operations. -Sold separately with windrower order
or order as DIA through service parts
In-cab on the go adjustments for
merger belt speed and the deflector DRIVE PUMP SPECIFICATION
position let you control the merger to Model Series Capacity
place the windrows as desired. -HW5 11.3 gpm (42.8 lpm)*
-H8000 15.1gpm (57.2 lpm)*
Laterally-mounted, draper-belt conveyor; -Speedrower 15.1gmp (57.2lpm)*
folds up under windrower belly frame -Relief 3000 psi (206.8 bar)*
when not in use, allowing single *At rated engine speed
windrow or swath formation.
CONVEYOR FRAME SPECIFICATIONS
Merger folds down and forward -Frame Length: 77.4in.(1966.2mm)
(further forward at the left end) -Frame Width: 89 in.(2260.5mm)
when deployed for merging -Ground Clearance
application. -Operating 5in.(127mm)*
-Transport 28in.(711)
Merger Conveyor Flotation: *Adjustable, above ground
Table can float upward and rearward recommendation
to minimize damage in the event of
contact with an obstruction or BELT SPECIFICATION
obstacle. -Width 42 in. (1066.8mm)
-Length* 84.6 in. (2150mm)
NOTE: DuraMerger 419 windrow -Roller Dia. 4 in. (101.6 mm)
attachments prior to MY2015 CANNOT -Type Endless & Vulcanized
be adapted to MY2015 and current -Construction# One ply
production due to significant changes -Guidance Vee-guide rib
to the lift arm and frame assembly. -Tracking Adjustable Drive Roll
-Tensioning Adjustable Spring
NOTE: MY2015 and current production -Crop Handling Raised Rib
will work with H8000 Series 6-cylinder -Crop Delivery Right side
windrowers when outfitted for the *Measured roll center to center
attachment.
BELT DRIVE SPECIFICATION
-Speed Range 7-17mph (11-27kph)
-Motor type Fixed Gear Type
-Displacement 1.76cu in(28.8cc)
-Drive #50 Chain Drive
Page 106
-HT2H 01
DURAMERGER 419
US PRICE LIST
-HT2H 01 0034 000 01-SEP-17 Page 105 of 160
(Grand Island, NE)
Standard Equipment
OPERATOR CONTROLS FUNCTIONS WINDROWER COMPATIBILITY
Controlled from multi-function handle -HW5 Series, 6-cylinder models (non-
-Full Raise/Lower draper) with windrower software
-Variable position, Side Deflector version 7.3 or higher.
-H8000 Series, 6-cylinder models
Controlled from height-hand Console: (except with dealer-installed draper
-On/Off toggle switch ready kit)
-Variable Speed toggle switch -Speedrower Series 6-cylinder models
200, 240, 220, 260
OPERATOR FEEDBACK
-Audible alarm and warning messages DISC HEAD COMPATIBILITY
on 4-line display or the IntelliView™ -HD Series* 750HD & 770HD
IV display when equipped. -Durabine Series* 416 & 419
*Non specialty heads only
-Compatible with Roll conditioning
system ONLY
-Not for use with LeaningEdge™ flail
tine conditioning system
WARRANTY:
New Holland Standard Warranty Applies
Models
COMMERCIAL MODEL TECHNICAL TYPE Weight Factory Data List Price
DURAMERGER 419 550100564-MERGER NH 7,056 LB 9007905P59 $10,267.00
Page 107
-HT2N 01
DURABINE™ 416 / DURABINE™ 419 DISC HEADS
US PRICE LIST
-HT2N 01 0034 000 01-SEP-17 Page 106 of 160
(Grand Island, NE)
Standard Equipment
DURABINE™ 416 SPECIFICATIONS DURABINE™ 419 SPECIFICATIONS
-Flotation Hydraulic -Flotation Hydraulic
-Float Adj. RH/LH Independent -Float Adj. RH/LH Independent
-Head Tilt Hydraulic -Head Tilt Hydraulic
-Impact Hood Liners Standard -Impact Hood Liner Standard
-Trans. Lighting Standard -Trans. Lighting Standard
-Parking Stands Standard -Parking Stands Standard
-Tractor Connection Hard Plumbed -Tractor Connection Hard Plumbed
DRIVE SPECIFICATIONS DRIVE SPECIFICATIONS
-Head Drive Dual Hyd. Motors -Head Drive Dual Hyd. Motors
-Power Rating 215 HP -Power Rating 215 HP
(@2200 CB-RPM) (@2200 CB-RPM)
-Protection Hyd. Relief Valve -Protection Hyd. Relief Valve
DISC CUTTERBAR SPECIFICATIONS DISC CUTTERBAR SPECIFICATIONS
-Cutting Width 16 ft. 1 in. (4.9m) -Cutting Width 19 ft. 4in.(5.9m)
-Cutting Height .7-3.5 in.(18-89mm) -Cutting Height .7-3.5 in. (18-89mm)
-QuickMax™ Knives Standard -QuickMax™ Knives Standard
-Num. Discs 10 Large Oval Discs -Num. Discs 12 Large Oval Discs
-Disc rotation Counter Rotating -Disc rotation Counter Rotating
-Max. Disc Speed 2500 rpm -Max. Disc Speed 2500 rpm
-Knives/Disc 2 Reversible -Knives/Disc 2 Reversible
-Std. Knives 18° Smooth Edge -Std. Knives 18° Smooth Edge
-Type MowMax™ II Disc -Type MowMax™ II Disc
Cutterbar Cutterbar
-Protection ShockPRO™ System -Protection ShockPRO™ System
-Safety Curtains ISO17103 Complaint -Safety Curtains ISO17103Complaint
-Rock Guard Heavy-Duty Cast -Rock Guard Heavy-Duty Cast
Iron Iron
-Skid Shoes Hardened Steel – -Skid Shoes Hardened Steel –
Full Coverage Full Coverage
CROP FLOW AUGER SPECIFICATIONS* CROP FLOW AUGER SPECIFICATIONS*
-Type/Rotation Floating/ Undershot -Type/Rotation Floating/ Undershot
-Diameter 20 in.(508mm) -Diameter 20 in.(508mm)
-Flighting 5/16 in. -Flighting 5/16 in.
-Feed Paddles Removable -Feed Paddles Removable
*For Stanard Configurations ONLY *For Standard Configurations ONLY
WARRANTY WARRANTY
-New Holland Standard Warranty -New Holland Standard Warranty
Applies To Base Applies To Base
-MowMax 3 Year, Factory Cutterbar -MowMax 3 Year, Factory Cutterbar
Extended Warranty Extended Warranty
Page 108
-HT2N 01
DURABINE™ 416 / DURABINE™ 419 DISC HEADS
US PRICE LIST
-HT2N 01 0034 000 01-SEP-17 Page 107 of 160
(Grand Island, NE)
Standard Equipment
CONDITIONING SPECIFICATIONS DURABINE 416 HEAD COMPATIBILITY
CHEVRON ROLL SYSTEM -SR220/SR260 & SR200/SR240
-Roll Width 102 in.(2.6m) -H8060/H8080** & HW345/365**
-Roll Diameter 10-3/8 in. (264mm)
-Roll Material Rubber or Steel DURABINE 419 HEAD COMPATIBILITY
-Roll Speed 938 rpm -SR260 & SR240
-Roll Pressure System Torsion Bar -H8080** & HW365**
-Roll Pressure Adj. Hand Crank
-Roll Gap & Timing Adjustable ** Contact ASIST for compatibility
details with prior series tractors**
HIGH-CONTACT SYSTEM
-Roll Width 102 in.(2.6m) GRASS SEED HEAD CONFIGURATION:
LeaningEdge™ FLAIL TINE SYSTEM* -Adj. Push Bar Standard
-Durabine 419 NOT AVAILABLE -Crop Flow Auger Tapered Flighting,
-Design LeaningEdge™ Flail No Paddles
Tines -Rear Deck Standard
-Tine Material Cast Steel -Crop Control Windrow Forming Rods
-Rotor Width 90 in.(2.3m) -Optional Swath Closure Kits:
-Rotor Speed 1310 rpm 717701 60 in. Field Ins. Kit
-Intensity Adjustable Hood 717702 83 in Field Ins. Kit
-Hood Liner Replaceable
-Adjustment Hand Crank BioMaxx™ HEAD CONFIGURATION
-Available Model(s)
*NOT FOR USE WITH DURAMERGER Durabine 416 AVAILABLE
419 DOUBLE WINDROW ATTACHMENT Durabine 419 AVAILABLE
-Design NON-Conditioning,
SWATH SPECIFICATIONS Drive Included
-Width Range 38-96 in.(.96-2.4m) -Crop Flow Auger Full Flighted w/
-Windrow Shields Adjustable* Standard Paddles
-Swath Gate/Baffle Adjustable -Rear Deck Standard
*Tractor Mounted -Optional Swath Closure Kits:
717701 60 in. Field Ins. Kit
717702 83 in Field Ins. Kit
-Roll Diameter 10-3/8 in.(264mm) -Available Model(s)
-Roll Material Urethane Durabine 416 AVAILABLE
-Roll Design Chevron Grooved Durabine 419 NOT AVAILABLE
-No Conditioning Standard
-Durabine 416 AVAILABLE -Seed Curtains Standard
Page 109
-HT2N 01
DURABINE™ 416 / DURABINE™ 419 DISC HEADS
US PRICE LIST
-HT2N 01 0034 000 01-SEP-17 Page 108 of 160
(Grand Island, NE)
Models
COMMERCIAL MODEL CONDITIONER TYPE Weight Factory Data List Price
DURABINE 416 BTO Less Conditioner 4,743 LB 9028598P57 $37,141.00
DURABINE 416 BTO GRASS SEED SPECIAL 4,743 LB 9030536P66 $39,658.00
DURABINE 416 BTO Flail Rotor Conditioner 4,743 LB 9031471P44 $40,872.00
DURABINE 416 BTO Rubber on rubber chevron 4,743 LB 9033076P89 $42,957.00
DURABINE 416 BTO Steel on steel chevron 4,743 LB 9033536P58 $43,554.00
DURABINE 416 BTO Hi-contact 4,743 LB 9040169P36 $52,168.00
DURABINE 419 BTO Less Conditioner 5,233 LB 9034951P07 $45,391.00
DURABINE 419 BTO Rubber on rubber chevron 5,233 LB 9039429P39 $51,207.00
DURABINE 419 BTO Steel on steel chevron 5,233 LB 9039889P08 $51,804.00
DURABINE 419 BTO Hi-contact 5,233 LB 9046521P86 $60,418.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_H5406 POPPET STYLE QUICK COUPLER
439059 Poppet Style Couplers-Dsc Head
Includes poppet style quick couplers for Disc Head connection to
the Windrower. Windrower must also have poppet style quick
couplers for connection.
9000175P56 $228.00
XH5406X No Poppet Style Quick Coupler
Use threaded fitting to hard plumb hydraulic connection.
No Charge
SD_16028 GAUGE WHEEL KIT
715301 Gauge Wheel Kit
For Durabine 419, must also order LH support #47754905 and RH
support 47754907 from service parts to complete installation.
9001783P32 $2,316.00
FACTORY SUPPLIED OPTIONS
HYDRAULIC KITS
WHEEL KITS
Page 110
-HT2N 01
DURABINE™ 416 / DURABINE™ 419 DISC HEADS
US PRICE LIST
-HT2N 01 0034 000 01-SEP-17 Page 109 of 160
(Grand Island, NE)
SD_C5832 SKID SHOE
415017 Adjustable Skid Shoes Kit
Adjustable skid shoe kit provides 3/4 to 6 1/2 inch cutting height
range (18 to 168 mm). For Durabine 419, must also order LH
support #47754905 and RH support 47754907 from service parts
to complete installation.
NOT COMPATIBLE with roller gauge wheels PN: 715301.
9001416P80 $1,840.00
SD_20078 HOSE KIT
439139 CROSS OVER HOSE KIT
REQUIRED when used with MY2014 and newer Speedrower®
series draper ready windrowing tractors.
9000860P86 $1,118.00
SD_50018 CORNER MARKER KIT
716791 Corner Marker Kit
For better visibility of the corners for operation and transport.
Not compatible with specialty header.
9000160P93 $209.00
SD_50047 HIGH STUBBLE KIT
715289 High Stubble Kit
Set of 8 high-stubble skid shoes. Provides 2.2"-3.9" (56-100mm)
cut-height range.
9000473P55 $615.00
SD_H5101 CROP DIVIDERS
717002 Crop Dividers
Pair of 2 dividers, one for each end of header. Not compatible
with specialty header.
9000270P27 $351.00
SD_H5811 PUSHBAR DIVIDER
716695 Push Bar For Tall Crops
For tall, cane-type crops. Not compatible with specialty header.
9000642P95 $835.00
SD_H5815 TEXTURED LINER KIT
716537 Textured Liner Kit
Durabine 416 Flail head only. For more aggressive flail
conditioning.
9000317P24 $412.00
SD_47083 OPERATOR'S MANUAL
715294 French Canadian No Charge
715309 Spanish Manual - NA No Charge
DISC HEAD OPTIONS
LANGUAGE KITS
Page 111
-HT2N 01
DURABINE™ 416 / DURABINE™ 419 DISC HEADS
US PRICE LIST
-HT2N 01 0034 000 01-SEP-17 Page 110 of 160
(Grand Island, NE)
SD_50046 HIGH CONTACT MODULE
717364 High-Contact Roll Module
Extra Conditioner Bundle (Does not include Roll Drive PTO Shafts).
No configuration changes for this option once order is placed.
1,090 LB 9012442P43 $16,159.00
SD_H5816 RUBBER CONDITIONER MODULE
716939 Rubber Conditioner Module
Extra Conditioner Bundle (Does not include Roll Drive PTO Shafts).
No configuration changes for this option once order is placed.
9005349P19 $6,947.00
SD_H5817 STEEL CONDITIONER MODULE
717720 Steel Conditioner Module
Extra Conditioner Bundle (Does not include Roll Drive PTO Shafts).
No configuration changes for this option once order is placed.
9005808P88 $7,544.00
SD_H5820 FLAIL CONDITIONER MODULE
717969 Flail Conditioner Module
Extra Conditioner Bundle (Does not include Roll Drive PTO Shafts).
No configuration changes for this option once order is placed.
9004804P03 $6,239.00
SD_H5821 CONDITIONER DRIVE SHAFT BUNDLE
717994 Roll Conditioner Drive Shaft
Drive Shafts for Roll Conditioner. Only order if roll conditioner
is being installed on less conditioner or flail conditioner header.
if WORKING WIDTH is 16 ft. 9000652P19 $847.00
if WORKING WIDTH is 19 ft. 9000788P48 $1,024.00
717995 Flail Conditioner Drive Shaft
Drive Shafts for Flail Conditioner. Only order if flail conditioner
is being installed on less conditioner or roll conditioner header.
9000344P19 $447.00
SD_H5818 60 IN CLOSURE KIT
717701 60 in. Opening Closure Kit
used to make a 60" windrow when no conditioner is installed
44 LB 9000529P76 $688.00
SD_H5819 83 IN CLOSURE KIT
717702 83 in. Opening Closure Kit
used to make a 83" windrow when no conditioner is installed
20 LB 9000478P94 $622.00
FIELD INSTALLED HEADER COMPLETING PACKAGES
FIELD CONVERSION MODULES
CLOSURE KITS
Page 112
-HT2P 01
HS SERIES HAYBINE® SICKLE HEAD
US PRICE LIST
-HT2P 01 0034 000 01-SEP-17 Page 111 of 160
(Grand Island, NE)
Standard Equipment
HS SERIES HEAD SPECIFICATIONS ROLL CONDITIONING
-Drive Type Hydraulic -Chevron Rubber or Steel
-Head Drive Motor NOT Included -High-Contact Urethane
-Connection Poppet Couplers -Roll Dimension 102 in.x10.4 in dia.
CUTTERBAR SPECIFICATIONS -Roll Pressure Torsion Bar/Hand Crank
-Cutting Width HS14 - 14 ft. 3 in. -Roll Drive Gearbox & PTO
HS16 - 16 ft. 3 in.
HS18 - 18 ft. 3 in. SP WINDROWER COMPATIBILITY
-Drive Mechanical, counter -Speedrower, H8000, HW 5 Series,
stroking dual sickles HW 0 Series, SPW 2450, and 2550.
-Wobble Drive Dual, Heavy-Duty TRAIL FRAME COMPATIBILITY
-Knife Sections -1475 & H7150 Mower-Conditioner
Attachment 100% Bolted ADAPTOR FRAME COMPATIBILITY
Type/Thickness Over-serrated -2300 BF & 2330 BR
Back Hardened Standard Must order 716965 sickle head adapter
-Wearplate Standard to operate with a Speedrower, H8000,
-Cutting Height 1.2-6.2 in. or HW5 series.
-Hold Downs Bolt Adjustable HS12 is NOT compatible with model
-Guards Standard Type 1475 and H7150 frail frame or the
REEL SPECIFICATIONS Speedrower series.
-Num. Tine Bars 5 Bar - Segmented HS12 is only for use on PRIOR MODEL
-Reel Drive Chain & Variable SPW with 16.9-28 R4 tires.
Speed Belt HS14 IS ONLY compatible with model
-Position Adjustable SR130 & 160 Speedrower series SPW.
-Drive Belt & Chain
AUGER SPECIFICATIONS CONTACT ASIST PRIOR SERIES DETAIL
-Auger Diameter 20 in.
-Flighting Depth 5 in. WARRANTY
-Auger Type Single/Floating New Holland Standard Warranty Applies
-Slip Clutch Standard
Models
COMMERCIAL MODEL CONDITIONER TYPE Weight Factory Data List Price
HS14 BTO Rubber on rubber chevron 4,240 LB 9023474P22 $30,486.00
HS14 BTO Steel on steel chevron 4,240 LB 9023953P16 $31,108.00
HS14 BTO Hi-contact 4,240 LB 9030875P46 $40,098.00
HS16 BTO Rubber on rubber chevron 4,480 LB 9024259P62 $31,506.00
HS16 BTO Steel on steel chevron 4,480 LB 9024738P56 $32,128.00
HS16 BTO Hi-contact 4,480 LB 9031660P86 $41,118.00
HS18 BTO Rubber on rubber chevron 4,600 LB 9025165P14 $32,682.00
HS18 BTO Steel on steel chevron 4,600 LB 9025644P08 $33,304.00
HS18 BTO Hi-contact 4,600 LB 9032566P38 $42,294.00
Page 113
-HT2P 01
HS SERIES HAYBINE® SICKLE HEAD
US PRICE LIST
-HT2P 01 0034 000 01-SEP-17 Page 112 of 160
(Grand Island, NE)
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_20107 HYDRAULIC REEL DRIVE
716961 Hydraulic Reel Drive Kit
Must be used in conjunction with windrower-mounted Hydraulic
Reel Drive Kit
42 LB 9000852P39 $1,107.00
SD_H5101 CROP DIVIDERS
715295 Crop Divider
Pair of 2 dividers, one for each end of header.
Recommended for tall crops.
22 LB 9000220P22 $286.00
SD_H7004 LIFT ARM EXTENSION
439105 Lift Arm Extension
Includes lift arm extension brackets and crop deflectors.
-Required for HS14 header installation on
MY15 4 cyliner Draper Ready.
-Required for HS16 & HS18 header installation on
MY15 6 Cylinder.
9000727P65 $945.00
SD_16028 GAUGE WHEEL KIT
715301 Gauge Wheel Kit
Set of 4 gauge wheels which replaces the skid shoes.
240 LB 9001861P86 $2,418.00
SD_47083 OPERATOR'S MANUAL
715294 French Canadian 1 LB No Charge
715309 Spanish Manual - NA 1 LB No Charge
FACTORY SUPPLIED OPTIONS
HYDRAULIC KITS
SICKLE HEAD OPTIONS
WHEEL KITS
LANGUAGE KITS
Page 114
-HT2L 01
DURASWATH™ 425HB DRAPER HEAD
US PRICE LIST
-HT2L 01 0027 000 01-SEP-17 Page 113 of 160
Standard Equipment
DuraSwath™ 425 SPECIFICATIONS DRAPER BELT & DECK SPECIFICATIONS
-Drive Speedrower® SPW draper -Type Raptor™ Draper Belt
head drive system, twin -Material Friction coated 100%
40 gpm hydraulic pumps polyester high-tensile
with dedicated knife drive filament fabric with pun-
and reel & draper circuits cture and tear resistance
-In-line filtration Standard with reinforced cleats.*
-Fore/Aft Tilt Angle 2-8° -Belt Drive Hydraulic, Pulled
-Max. Harvest Speed 11.5mph -Belt Tracking Molded V-Guide
(18.5kph) -Width 42 in.
-Belt Angle 15° @ 2° Tilt
DRAPER HEAD COMPATIBILITY -Max. Belt Speed 750 ft./sec.
-Speedrower 130, 200 & 240 (Tier 3) -Belt Speed Control Variable - In cab
-Speedrower 160, 220 & 260 (Tier 4) -Deck Sealing
-Incompatible with all prior series Front Edge Hay guard labyrinth
self-propelled windrowers. edge seal
Rear Edge Draper guard shield
CUTTERBAR SPECIFICATIONS with full-width deck
-Drive System SCH® Pro-Drive, low belt guide.
maintenance planetary
knife drive system.* STANDARD DECK SPECIFICATIONS
-Available Cutting Systems -Center delivery 56-72"(1.42-1.83)*
Standard SCH Easy Cut system *Max. 80 in. by
with hardened alloy spring removing opening
steel guards,low friction extension panels.
roller guides, and bolted
thru-hardened knife DOUBLE-SWATH SPECIFICATIONS
sections for fast -End discharge 55-65 in.(1.3-1.6m)*
replacement. -Hyd. Deck Shift Standard
Optional New Holland cutting sys-
tem with heavy-duty cast REEL SPECIFICATIONS
iron standard or stub -Type HB – Flip over reel
guards resist bending. -Assembly Fully-Assembled
Knife sections are thru- -Num. Bats 6
and back-hardened, 100% -Fingers Plastic, 1/4 turn
bolted for fast quick change design
replacement, with hold -End Tine Standard
down adjustment. REEL DRIVE & ADJUSTMENTS
-Cutting Width 25 ft. (7.6m) SPECIFICATIONS
-Min. Cut Height .75 in.(19mm)@8° -Drive Hydraulic, with chain
-Knife Single Knife-AVBL. reduction with
Double Knife-AVBL. automatic groundspeed
-Knife Speed 1400 SPM synchronization
-Knife Stroke 3.35 in.(85mm) -Hyd. Drive Motor 15.9 cu.in.
-Poly Skid Kit Available -Speed 10-75 rpm
Page 115
-HT2L 01
DURASWATH™ 425HB DRAPER HEAD
US PRICE LIST
-HT2L 01 0027 000 01-SEP-17 Page 114 of 160
Standard Equipment
-Lift Hydraulic
-Fore/Aft Hydraulic
CROP DIVIDER SPECIFICATIONS
-Fixed Pipe Standard
-Floating Tip Optional
-Rotary Shear Ready Optional
OTHER OPTIONAL EQUIPMENT
-Header gauge wheel kit
-2 Wheel transport kit
-Adjustable skid shoe kit
-Cross auger feed kit
WARRANTY
New Holland Standard Warranty Applies
*SCH® is a registered trademark of the
Schumacher Company, LLC
*RAPTOR™ is a trademark of WCCO
Belting Inc.
Page 116
-HT2L 01
DURASWATH™ 425HB DRAPER HEAD
US PRICE LIST
-HT2L 01 0027 000 01-SEP-17 Page 115 of 160
Models
COMMERCIAL
MODEL
KNIFE REEL DELIVERY Weight Factory Data List Price
DURASWATH 425HB Single Knife SINGLE REEL STD DECK 4,675 LB 9040217P87 $52,231.00
DURASWATH 425HB Single Knife SINGLE REEL DOUBLE SWATH 4,675 LB 9044355P85 $57,605.00
DURASWATH 425HB Double Knife SINGLE REEL STD DECK 4,675 LB 9043807P61 $56,893.00
DURASWATH 425HB Double Knife SINGLE REEL DOUBLE SWATH 4,887 LB 9048142P71 $62,523.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_H5806 CUTTING SYSTEM
727066 Schumacher Cutterbar
EasyCut system with spring steel guards, ProCut, bolt-on,
plated knife sections and Rollerguide kniveback guide system.
No Charge
727067 CNH Cutterbar Standard Guard
NH system with forged steel guards, adjustable hold-down clips
and bolt-on knife sections. Recommended for cutting all crops.
With adjustable knife hold-downs adjusted regularly,
cutterbar cuts cleaner longer using less power. Required for
green hay cutting on 25, 30, 36, 40 foot units. Standard guards.
if KNIFE is Double Knife and WORKING WIDTH is 25 ft.
9000101P64 $132.00
if KNIFE is Single Knife and WORKING WIDTH is 25 ft.
9000520P52 $676.00
727081 CNH Cutterbar Stub Guard
NH system with forged steel guards, adjustable hold-down clips
and bolt-on knife sections. Recommended for cutting all crops.
With adjustable knife hold-downs adjusted regularly, cutterbar
cuts cleaner longer using less power. Required for green hay
cutting on 25, 30, 36, 40 foot units. Stub guards.
if KNIFE is Double Knife and WORKING WIDTH is 25 ft.
9001137P29 $1,477.00
if KNIFE is Single Knife and WORKING WIDTH is 25 ft.
9001505P35 $1,955.00
COMPLETING PACKAGES
CUTTING SYSTEM
Page 117
-HT2L 01
DURASWATH™ 425HB DRAPER HEAD
US PRICE LIST
-HT2L 01 0027 000 01-SEP-17 Page 116 of 160
SD_H5601 REEL
449541 HB REEL SNGL PF 6B
Honey Bee high-strength, high-performance reels include timing
adjustment for varying crops and conditions. Innovative ¼ turn
quick release plastic tines and exclusive bat construction allow for
fast replacement and allow for custom finger spacing adjustments.
HB single piece reel with 6 bats and plastic ¼ turn quick release
fingers.
No Charge
SD_16050 TIRES/WHLS/HUBS/SPI
725591 Tires/Wheels/Hubs Spindles
Required w/castoring gauge wheel option, and/or 2-wheel- or
4-wheel transport option. Only order this option one time when
ordering both catoring gauge wheels and 2/4 wheel transport.
Wheels are the color yellow.
9000997P92 $1,296.00
SD_49010 HEADER TRANSPORT
727073 2 Wheel Hdr Transport Less TW
Includes two-piece tongue for LH end of header and fold-up axle
for RH end of header. Requires tires, wheels, hubs, spindles to be
functional. No on-header storage if castoring gauge wheels are
not ordered.
9001453P76 $1,888.00
SD_47083 OPERATOR'S MANUAL
725023 French Manual No Charge
SD_H5823 POLY SKID PLATE
727070 Poly Skid For CNH
Provides full width skids for on-ground operation for CNH
cutterbar.
9000908P60 $1,180.00
REELS
FACTORY SUPPLIED OPTIONS
TRANSPORT
LANGUAGE KITS
OPTIONAL CUTTERBAR PROTECTION SYSTEM (REQUIRED
FOR GREEN HAY CUTTING)
POLY SKID PLATES
Page 118
-HT2L 01
DURASWATH™ 425HB DRAPER HEAD
US PRICE LIST
-HT2L 01 0027 000 01-SEP-17 Page 117 of 160
727071 Poly Skid For Schumacher
Provides full width skids for on-ground operation for Schumacher
cutterbar.
9000908P60 $1,180.00
SD_C5832 SKID SHOE
727076 Adjustable Skid Shoes
One adjustable shoe for each end of the header.
9000570P57 $741.00
727145 Adjustable END/MDL Skid Shoes
One adjustable shoe for each end of the header, plus 2 additional
adjustable shoes for middle struts. This will equip the outer ends
and middle struts on 25' headers, and the outer ends and 2 of
the 4 middle struts on 30', 36' & 40' headers.
9001028P72 $1,336.00
SD_H5824 FLOATING TIP DIVIDER
727077 Floating Tip Divider
Recommended for hay and lentils.
9000498P19 $647.00
SD_H5825 END SHEARS
727078 Rotary Shear Ready
Cutting shears are mounted on the ends of the head. Help cut
through downed, tangled, and green crops.Includes brackets,
hoses, and valve cartridge to direct oil to rotary shear at both
ends of header.
9001141P91 $1,483.00
OPTIONAL EQUIPMENT
DRAPER HEAD OPTIONS
Page 119
-HT2L 02
DURASWATH™ 430HB DRAPER HEAD
US PRICE LIST
-HT2L 02 0027 000 01-SEP-17 Page 118 of 160
Standard Equipment
DuraSwath™ 430 SPECIFICATIONS DRAPER BELT & DECK SPECIFICATIONS
-Drive Speedrower® SPW draper -Type Raptor™ Draper Belt
head drive system, twin -Material Friction coated 100%
40 gpm hydraulic pumps polyester high-tensile
with dedicated knife drive filament fabric with pun-
and reel & draper circuits. cture and tear resistance
-In-line filtration Standard with reinforced cleats.*
-Fore/Aft Tilt Angle 2-8° -Belt Drive Hydraulic, Pulled
-Max. Harvest Speed 11.5mph -Belt Tracking Molded V-Guide
(18.5kph) -Width 42 in.
-Belt Angle 15° @ 2° Tilt
DRAPER HEAD COMPATIBILITY -Max. Belt Speed 750 ft./sec.
-Speedrower 130, 200 & 240 (Tier 3) -Belt Speed Control Variable - In cab
-Speedrower 160, 220 & 260 (Tier 4) -Deck Sealing
-Incompatible with all prior series Front Edge Hay guard labyrinth
self-propelled windrowers. edge seal
Rear Edge Draper guard shield
CUTTERBAR SPECIFICATIONS with full-width deck
-Drive System SCH® Pro-Drive, low belt guide.
maintenance planetary
knife drive system.* STANDARD DECK SPECIFICATIONS
-Available Cutting Systems -Center delivery 56-72"(1.42-1.83)*
Standard SCH Easy Cut system *Max. 80 in. by
with hardened alloy spring removing opening
steel guards,low friction extension panels.
roller guides, and bolted
thru-hardened knife DOUBLE-SWATH SPECIFICATIONS
sections for fast -End discharge 55-65 in. (1.3-1.6m)
replacement. -Hyd. Deck Shift Standard
Optional New Holland cutting sys-
tem with heavy-duty cast REEL SPECIFICATIONS
iron standard or stub -Type HB – Flip over reel
guards resist bending. -Assembly Fully-Assembled
Knife sections are thru- -Num. Bats 6
and back-hardened, 100% -Fingers Plastic, 1/4 turn
bolted for fast quick change design
replacement, with hold -End Tine Standard
down adjustment. REEL DRIVE & ADJUSTMENTS
-Cutting Width 30 ft. (9.1m) SPECIFICATIONS
-Min. Cut Height .75 in.(19mm)@8° -Drive Hydraulic, with chain
-Knife Single Knife-AVBL. reduction with
Double Knife-AVBL. automatic groundspeed
-Knife Speed 1400 SPM synchronization
-Knife Stroke 3.35 in.(85mm) -Hyd. Drive Motor 15.9 cu.in.
-Poly Skid Kit Available -Speed 10-75 rpm
Page 120
-HT2L 02
DURASWATH™ 430HB DRAPER HEAD
US PRICE LIST
-HT2L 02 0027 000 01-SEP-17 Page 119 of 160
Standard Equipment
-Lift Hydraulic
-Fore/Aft Hydraulic
CROP DIVIDER SPECIFICATIONS
-Fixed Pipe Standard
-Floating Tip Optional
-Rotary Shear Ready Optional
OTHER OPTIONAL EQUIPMENT
-Header gauge wheel kit
-2 Wheel transport kit
-Adjustable skid shoe kit
-Cross auger feed kit
WARRANTY
New Holland Standard Warranty Applies
*SCH® is a registered trademark of the
Schumacher Company, LLC
*RAPTOR™ is a trademark of WCCO
Belting Inc.
Page 121
-HT2L 02
DURASWATH™ 430HB DRAPER HEAD
US PRICE LIST
-HT2L 02 0027 000 01-SEP-17 Page 120 of 160
Models
COMMERCIAL
MODEL
KNIFE REEL DELIVERY Weight Factory Data List Price
DURASWATH 430HB Single Knife SINGLE REEL STD DECK 5,631 LB 9045857P35 $59,555.00
DURASWATH 430HB Single Knife SINGLE REEL DOUBLE SWATH 5,631 LB 9047656P84 $61,892.00
DURASWATH 430HB Double Knife SINGLE REEL STD DECK 5,991 LB 9047910P94 $62,222.00
DURASWATH 430HB Double Knife SINGLE REEL DOUBLE SWATH 5,631 LB 9049940P66 $64,858.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_H5806 CUTTING SYSTEM
727066 Schumacher Cutterbar
EasyCut system with spring steel guards, ProCut, bolt-on,
plated knife sections and Rollerguide kniveback guide system.
No Charge
727067 CNH Cutterbar Standard Guard
NH system with forged steel guards, adjustable hold-down clips
and bolt-on knife sections. Recommended for cutting all crops.
With adjustable knife hold-downs adjusted regularly,
cutterbar cuts cleaner longer using less power. Required for
green hay cutting on 25, 30, 36, 40 foot units. Standard guards.
if KNIFE is Double Knife and WORKING WIDTH is 30 ft.
9000163P24 $212.00
if KNIFE is Single Knife and WORKING WIDTH is 30 ft.
9000628P32 $816.00
727081 CNH Cutterbar Stub Guard
NH system with forged steel guards, adjustable hold-down clips
and bolt-on knife sections. Recommended for cutting all crops.
With adjustable knife hold-downs adjusted regularly, cutterbar
cuts cleaner longer using less power. Required for green hay
cutting on 25, 30, 36, 40 foot units. Stub guards.
if KNIFE is Double Knife and WORKING WIDTH is 30 ft.
9001104P18 $1,434.00
if KNIFE is Single Knife and WORKING WIDTH is 30 ft.
9001898P82 $2,466.00
COMPLETING PACKAGES
CUTTING SYSTEM
Page 122
-HT2L 02
DURASWATH™ 430HB DRAPER HEAD
US PRICE LIST
-HT2L 02 0027 000 01-SEP-17 Page 121 of 160
SD_H5601 REEL
449541 HB REEL SNGL PF 6B
Honey Bee high-strength, high-performance reels include timing
adjustment for varying crops and conditions. Innovative ¼ turn
quick release plastic tines and exclusive bat construction allow for
fast replacement and allow for custom finger spacing adjustments.
HB single piece reel with 6 bats and plastic ¼ turn quick release
fingers.
No Charge
SD_16027 CASTERING GAUGE WHEEL
725579 Castering Gauge Wheels
Fully castoring with 3-8 inches of shock travel. One person
adjustment. Requires tires, wheels, hubs, spindles option to
be functional. Wheels are the color yellow.
9002532P53 $3,289.00
SD_16050 TIRES/WHLS/HUBS/SPI
725591 Tires/Wheels/Hubs Spindles
Required w/castoring gauge wheel option, and/or 2-wheel- or
4-wheel transport option. Only order this option one time when
ordering both catoring gauge wheels and 2/4 wheel transport.
Wheels are the color yellow.
9000997P92 $1,296.00
SD_49010 HEADER TRANSPORT
727073 2 Wheel Hdr Transport Less TW
Includes two-piece tongue for LH end of header and fold-up axle
for RH end of header. Requires tires, wheels, hubs, spindles to be
functional. No on-header storage if castoring gauge wheels are
not ordered.
9001494P57 $1,941.00
SD_47083 OPERATOR'S MANUAL
725023 French Manual No Charge
REELS
FACTORY SUPPLIED OPTIONS
WHEEL KITS
TRANSPORT
LANGUAGE KITS
Page 123
-HT2L 02
DURASWATH™ 430HB DRAPER HEAD
US PRICE LIST
-HT2L 02 0027 000 01-SEP-17 Page 122 of 160
SD_H5823 POLY SKID PLATE
727070 Poly Skid For CNH
Provides full width skids for on-ground operation for CNH
cutterbar.
9000987P91 $1,283.00
727071 Poly Skid For Schumacher
Provides full width skids for on-ground operation for Schumacher
cutterbar.
9000987P91 $1,283.00
SD_C5832 SKID SHOE
727076 Adjustable Skid Shoes
One adjustable shoe for each end of the header.
9000570P57 $741.00
727145 Adjustable END/MDL Skid Shoes
One adjustable shoe for each end of the header, plus 2 additional
adjustable shoes for middle struts. This will equip the outer ends
and middle struts on 25' headers, and the outer ends and 2 of
the 4 middle struts on 30', 36' & 40' headers.
9001028P72 $1,336.00
SD_H5501 CROSS AUGER
725595 Feed Assist Cross Auger Kit
Full length auger with centered flighting.
9003975P51 $5,163.00
SD_H5824 FLOATING TIP DIVIDER
727077 Floating Tip Divider
Recommended for hay and lentils.
9000498P19 $647.00
SD_H5825 END SHEARS
727078 Rotary Shear Ready
Cutting shears are mounted on the ends of the head. Help cut
through downed, tangled, and green crops.Includes brackets,
hoses, and valve cartridge to direct oil to rotary shear at both
ends of header.
9001168P09 $1,517.00
OPTIONAL CUTTERBAR PROTECTION SYSTEM (REQUIRED
FOR GREEN HAY CUTTING)
POLY SKID PLATES
OPTIONAL EQUIPMENT
DRAPER HEAD OPTIONS
Page 124
-HT2L 03
DURASWATH™ 436HB DRAPER HEAD
US PRICE LIST
-HT2L 03 0027 000 01-SEP-17 Page 123 of 160
Standard Equipment
DuraSwath™ 436 SPECIFICATIONS DRAPER BELT & DECK SPECIFICATIONS
-Drive Speedrower® SPW draper -Type Raptor™ Draper Belt
head drive system, twin -Material Friction coated 100%
40 gpm hydraulic pumps polyester high-tensile
with dedicated knife drive filament fabric with pun-
and reel & draper circuits. cture and tear resistance
-In-line filtration Standard with reinforced cleats.*
-Fore/Aft Tilt Angle 2-8° -Belt Drive Hydraulic, Pulled
-Max. Harvest Speed 11.5mph -Drive Rolls Vulcanized rubber
(18.5kph) covered drive rolls
-Tracking Molded V-Guide
DRAPER HEAD COMPATIBILITY -Width 42 in.
-Speedrower 200 & 240 (6-Cy. Tier 3) -Belt Angle 15° @ 2° Tilt
-Speedrower 160, 220 & 260 (Tier 4) -Max. Belt Speed 750 ft./sec.
-Incompatible with all prior series -Belt Speed Control Variable - In cab
self-propelled windrowers. -Deck Sealing
Front Edge Hay guard labyrinth
CUTTERBAR SPECIFICATIONS edge seal
-Drive System SCH® Pro-Drive, low Rear Edge Draper guard shield
maintenance planetary with full-width deck
knife drive system.* belt guide.
-Available Cutting Systems
Standard SCH Easy Cut system STANDARD DECK SPECIFICATIONS
with hardened alloy spring -Center delivery 64-80 in. (1.6-2.0m)
steel guards,low friction
roller guides, and bolted DOUBLE-SWATH SPECIFICATIONS
thru-hardened knife -End discharge 55-65 in. (1.3-1.6m)
sections for fast -Hyd. Deck Shift Standard
replacement.
Optional New Holland cutting sys- REEL SPECIFICATIONS
tem with heavy-duty cast -Type HB – Flip over reel
iron standard or stub Single Reel Available
guards resist bending. Split Reel NOT - Available
Knife sections are thru- -Assembly Fully-Assembled
and back-hardened, 100% -Num. Bats 6
bolted for fast -Fingers Plastic, 1/4 turn
replacement, with hold quick change design
down adjustment. -End Tine Standard
-Cutting Width 36 ft. (11m)
-Min. Cut Height .75 in.(19mm)@8° REEL DRIVE & ADJUSTMENTS
-Knife Double Knife - STD. SPECIFICATIONS
-Knife Speed 1400 SPM -Drive Hydraulic, with chain
-Knife Stroke 3.35 in.(85mm) reduction with
-Poly Skid Kit Available automatic groundspeed
synchronization
Page 125
-HT2L 03
DURASWATH™ 436HB DRAPER HEAD
US PRICE LIST
-HT2L 03 0027 000 01-SEP-17 Page 124 of 160
Standard Equipment
-Hyd. Drive Motor 15.9 cu.in.
-Speed 10-75 rpm
-Lift Hydraulic
-Fore/Aft Hydraulic
CROP DIVIDER SPECIFICATIONS
-Fixed Pipe Standard
-Floating Tip Optional
-Rotary Shear Ready Optional
OPTIONAL EQUIPMENT
-Header gauge wheel kit
-2 Wheel transport kit
-Adjustable skid shoe kit
-Cross auger feed kit
WARRANTY
New Holland Standard Warranty Applies
*SCH® is a registered trademark of the
Schumacher Company, LLC
*RAPTOR™ is a trademark of WCCO
Belting Inc.
Page 126
-HT2L 03
DURASWATH™ 436HB DRAPER HEAD
US PRICE LIST
-HT2L 03 0027 000 01-SEP-17 Page 125 of 160
Models
COMMERCIAL
MODEL
KNIFE REEL DELIVERY Weight Factory Data List Price
DURASWATH 436HB Double Knife SINGLE REEL STD DECK 6,702 LB 9054707P73 $71,049.00
DURASWATH 436HB Double Knife SINGLE REEL DOUBLE SWATH 6,702 LB 9057292P62 $74,406.00
DURASWATH 436HB Double Knife SPLIT REEL STD DECK 7,069 LB 9060257P89 $78,257.00
DURASWATH 436HB Double Knife SPLIT REEL DOUBLE SWATH 6,702 LB 9062796P58 $81,554.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_H5806 CUTTING SYSTEM
727066 Schumacher Cutterbar
EasyCut system with spring steel guards, ProCut, bolt-on,
plated knife sections and Rollerguide kniveback guide system.
No Charge
727067 CNH Cutterbar Standard Guard
NH system with forged steel guards, adjustable hold-down clips
and bolt-on knife sections. Recommended for cutting all crops.
With adjustable knife hold-downs adjusted regularly,
cutterbar cuts cleaner longer using less power. Required for
green hay cutting on 25, 30, 36, 40 foot units. Standard guards.
9000917P07 $1,191.00
727081 CNH Cutterbar Stub Guard
NH system with forged steel guards, adjustable hold-down clips
and bolt-on knife sections. Recommended for cutting all crops.
With adjustable knife hold-downs adjusted regularly, cutterbar
cuts cleaner longer using less power. Required for green hay
cutting on 25, 30, 36, 40 foot units. Stub guards.
9002326P94 $3,022.00
COMPLETING PACKAGES
CUTTING SYSTEM
Page 127
-HT2L 03
DURASWATH™ 436HB DRAPER HEAD
US PRICE LIST
-HT2L 03 0027 000 01-SEP-17 Page 126 of 160
SD_H5601 REEL
449541 HB REEL SNGL PF 6B
Honey Bee high-strength, high-performance reels include timing
adjustment for varying crops and conditions. Innovative ¼ turn
quick release plastic tines and exclusive bat construction allow for
fast replacement and allow for custom finger spacing adjustments.
HB single piece reel with 6 bats and plastic ¼ turn quick release
fingers.
No Charge
449542 HB REEL SPLIT PF 6B
Honey Bee high-strength, high-performance reels include timing
adjustment for varying crops and conditions. Innovative ¼ turn
quick release plastic tines and exclusive bat construction allow for
fast replacement and allow for custom finger spacing adjustments.
HB split reel with 6 bats and plastic ¼ turn quick release fingers.
No Charge
SD_16027 CASTERING GAUGE WHEEL
725579 Castering Gauge Wheels
Fully castoring with 3-8 inches of shock travel. One person
adjustment. Requires tires, wheels, hubs, spindles option to
be functional. Wheels are the color yellow.
9002532P53 $3,289.00
SD_16050 TIRES/WHLS/HUBS/SPI
725591 Tires/Wheels/Hubs Spindles
Required w/castoring gauge wheel option, and/or 2-wheel- or
4-wheel transport option. Only order this option one time when
ordering both catoring gauge wheels and 2/4 wheel transport.
Wheels are the color yellow.
9000997P92 $1,296.00
SD_49010 HEADER TRANSPORT
727073 2 Wheel Hdr Transport Less TW
Includes two-piece tongue for LH end of header and fold-up axle
for RH end of header. Requires tires, wheels, hubs, spindles to be
functional. No on-header storage if castoring gauge wheels are
not ordered.
9001494P57 $1,941.00
REELS
FACTORY SUPPLIED OPTIONS
WHEEL KITS
TRANSPORT
Page 128
-HT2L 03
DURASWATH™ 436HB DRAPER HEAD
US PRICE LIST
-HT2L 03 0027 000 01-SEP-17 Page 127 of 160
727074 4 Wheel Hdr transport less TW
Includes two-piece tongue and two dolly wheels for LH end
of header and fold-up axle for RH end of header. Requires
tires, wheels, hubs, spindles for rear axle to be functional.
No on-header storage if castoring gauge wheels not ordered.
9002685P76 $3,488.00
SD_47083 OPERATOR'S MANUAL 725023 French Manual No Charge
SD_H5823 POLY SKID PLATE
727070 Poly Skid For CNH
Provides full width skids for on-ground operation for CNH
cutterbar.
9001406P02 $1,826.00
727071 Poly Skid For Schumacher
Provides full width skids for on-ground operation for Schumacher
cutterbar.
9001406P02 $1,826.00
SD_C5832 SKID SHOE
727076 Adjustable Skid Shoes
One adjustable shoe for each end of the header.
9000570P57 $741.00
727145 Adjustable END/MDL Skid Shoes
One adjustable shoe for each end of the header, plus 2 additional
adjustable shoes for middle struts. This will equip the outer ends
and middle struts on 25' headers, and the outer ends and 2 of
the 4 middle struts on 30', 36' & 40' headers.
9001028P72 $1,336.00
SD_H5501 CROSS AUGER
725595 Feed Assist Cross Auger Kit
Full length auger with centered flighting.
9004111P03 $5,339.00
SD_H5824 FLOATING TIP DIVIDER
727077 Floating Tip Divider
Recommended for hay and lentils.
9000498P19 $647.00
LANGUAGE KITS
OPTIONAL CUTTERBAR PROTECTION SYSTEM (REQUIRED
FOR GREEN HAY CUTTING)
POLY SKID PLATES
OPTIONAL EQUIPMENT
DRAPER HEAD OPTIONS
Page 129
-HT2L 03
DURASWATH™ 436HB DRAPER HEAD
US PRICE LIST
-HT2L 03 0027 000 01-SEP-17 Page 128 of 160
SD_H5825 END SHEARS
727078 Rotary Shear Ready
Cutting shears are mounted on the ends of the head. Help cut
through downed, tangled, and green crops.Includes brackets,
hoses, and valve cartridge to direct oil to rotary shear at both
ends of header.
9001194P27 $1,551.00
Page 130
-HT2L 04
DURASWATH™ 440HB DRAPER HEAD
US PRICE LIST
-HT2L 04 0027 000 01-SEP-17 Page 129 of 160
Standard Equipment
DuraSwath™ 440 SPECIFICATIONS DRAPER BELT & DECK SPECIFICATIONS
-Drive Speedrower® SPW draper -Type Raptor™ Draper Belt
head drive system, twin -Material Friction coated 100%
40 gpm hydraulic pumps polyester high-tensile
with dedicated knife drive filament fabric with pun-
and reel & draper circuits. cture and tear resistance
-In-line filtration Standard with reinforced cleats.*
-Fore/Aft Tilt Angle 2-8° -Belt Drive Hydraulic, Pulled
-Max. Harvest Speed 11.5mph -Drive Rolls Vulcanized rubber
(18.5kph) covered drive rolls
-Tracking Molded V-Guide
DRAPER HEAD COMPATIBILITY -Width 42 in.
-Speedrower 200 & 240 (6-Cy. Tier 3) -Belt Angle 15° @ 2° Tilt
-Speedrower 220 & 260 (6-Cy. Tier 4) -Max. Belt Speed 750 ft./sec.
-Incompatible with all prior series -Belt Speed Control Variable - In cab
self-propelled windrowers. -Deck Sealing
Front Edge Hay guard labyrinth
CUTTERBAR SPECIFICATIONS edge seal
-Drive System SCH® Pro-Drive, low Rear Edge Draper guard shield
maintenance planetary with full-width deck
knife drive system.* belt guide.
-Available Cutting Systems
Standard SCH Easy Cut system STANDARD DECK SPECIFICATIONS
with hardened alloy spring -Center delivery 64-80 in. (1.6-2.0m)
steel guards,low friction
roller guides, and bolted REEL SPECIFICATIONS
thru-hardened knife -Type HB – Flip over reel
sections for fast Split Reel Standard
replacement. -Assembly Fully-Assembled
Optional New Holland cutting sys- -Num. Bats 6
tem with heavy-duty cast -Fingers Plastic, 1/4 turn
iron standard or stub quick change design
guards resist bending. -End Tine Standard
Knife sections are thru-
and back-hardened, 100%
bolted for fast
replacement, with hold
down adjustment. REEL DRIVE & ADJUSTMENTS
-Cutting Width 40 ft. (12.1m) SPECIFICATIONS
-Min. Cut Height .75 in.(19mm)@8° -Drive Hydraulic, with chain
-Knife Double Knife - STD. reduction with
-Knife Speed 1400 SPM automatic groundspeed
-Knife Stroke 3.35 in.(85mm) synchronization
-Poly Skid Kit Available -Hyd. Drive Motor 15.9 cu.in.
-Speed 10-75 rpm
Page 131
-HT2L 04
DURASWATH™ 440HB DRAPER HEAD
US PRICE LIST
-HT2L 04 0027 000 01-SEP-17 Page 130 of 160
Standard Equipment
-Lift Hydraulic
-Fore/Aft Hydraulic
CROP DIVIDER SPECIFICATIONS
-Fixed Pipe Standard
-Floating Tip Optional
-Rotary Shear Ready Optional
OPTIONAL EQUIPMENT
-Header gauge wheel kit
-4 Wheel transport kit
-Adjustable skid shoe kit
-Cross auger feed kit
WARRANTY
New Holland Standard Warranty Applies
*SCH® is a registered trademark of the
Schumacher Company, LLC
*RAPTOR™ is a trademark of WCCO
Belting Inc.
Page 132
-HT2L 04
DURASWATH™ 440HB DRAPER HEAD
US PRICE LIST
-HT2L 04 0027 000 01-SEP-17 Page 131 of 160
Models
COMMERCIAL
MODEL
KNIFE REEL DELIVERY Weight Factory Data List Price
DURASWATH 440HB Double Knife SPLIT REEL STD DECK 7,715 LB 9059290P77 $77,001.00
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_H5806 CUTTING SYSTEM
727066 Schumacher Cutterbar
EasyCut system with spring steel guards, ProCut, bolt-on,
plated knife sections and Rollerguide kniveback guide system.
No Charge
727067 CNH Cutterbar Standard Guard
NH system with forged steel guards, adjustable hold-down clips
and bolt-on knife sections. Recommended for cutting all crops.
With adjustable knife hold-downs adjusted regularly,
cutterbar cuts cleaner longer using less power. Required for
green hay cutting on 25, 30, 36, 40 foot units. Standard guards.
9000100P10 $130.00
727081 CNH Cutterbar Stub Guard
NH system with forged steel guards, adjustable hold-down clips
and bolt-on knife sections. Recommended for cutting all crops.
With adjustable knife hold-downs adjusted regularly, cutterbar
cuts cleaner longer using less power. Required for green hay
cutting on 25, 30, 36, 40 foot units. Stub guards.
9001120P35 $1,455.00
SD_H5601 REEL
449542 HB REEL SPLIT PF 6B
Honey Bee high-strength, high-performance reels include timing
adjustment for varying crops and conditions. Innovative ¼ turn
quick release plastic tines and exclusive bat construction allow for
fast replacement and allow for custom finger spacing adjustments.
HB split reel with 6 bats and plastic ¼ turn quick release fingers.
No Charge
COMPLETING PACKAGES
CUTTING SYSTEM
REELS
Page 133
-HT2L 04
DURASWATH™ 440HB DRAPER HEAD
US PRICE LIST
-HT2L 04 0027 000 01-SEP-17 Page 132 of 160
SD_16027 CASTERING GAUGE WHEEL
725579 Castering Gauge Wheels
Fully castoring with 3-8 inches of shock travel. One person
adjustment. Requires tires, wheels, hubs, spindles option to
be functional. Wheels are the color yellow.
9002532P53 $3,289.00
SD_16050 TIRES/WHLS/HUBS/SPI
725591 Tires/Wheels/Hubs Spindles
Required w/castoring gauge wheel option, and/or 2-wheel- or
4-wheel transport option. Only order this option one time when
ordering both catoring gauge wheels and 2/4 wheel transport.
Wheels are the color yellow.
9000997P92 $1,296.00
SD_49010 HEADER TRANSPORT
727074 4 Wheel Hdr transport less TW
Includes two-piece tongue and two dolly wheels for LH end
of header and fold-up axle for RH end of header. Requires
tires, wheels, hubs, spindles for rear axle to be functional.
No on-header storage if castoring gauge wheels not ordered.
9002685P76 $3,488.00
SD_47083 OPERATOR'S MANUAL
725023 French Manual No Charge
SD_H5823 POLY SKID PLATE
727070 Poly Skid For CNH
Provides full width skids for on-ground operation for CNH
cutterbar.
9001644P72 $2,136.00
727071 Poly Skid For Schumacher
Provides full width skids for on-ground operation for Schumacher
cutterbar.
9001644P72 $2,136.00
FACTORY SUPPLIED OPTIONS
WHEEL KITS
TRANSPORT
LANGUAGE KITS
OPTIONAL CUTTERBAR PROTECTION SYSTEM (REQUIRED
FOR GREEN HAY CUTTING)
POLY SKID PLATES
Page 134
-HT2L 04
DURASWATH™ 440HB DRAPER HEAD
US PRICE LIST
-HT2L 04 0027 000 01-SEP-17 Page 133 of 160
SD_C5832 SKID SHOE
727076 Adjustable Skid Shoes
One adjustable shoe for each end of the header.
9000570P57 $741.00
727145 Adjustable END/MDL Skid Shoes
One adjustable shoe for each end of the header, plus 2 additional
adjustable shoes for middle struts. This will equip the outer ends
and middle struts on 25' headers, and the outer ends and 2 of
the 4 middle struts on 30', 36' & 40' headers.
9001028P72 $1,336.00
SD_H5501 CROSS AUGER
725595 Feed Assist Cross Auger Kit
Full length auger with centered flighting.
9004266P57 $5,541.00
SD_H5824 FLOATING TIP DIVIDER
727077 Floating Tip Divider
Recommended for hay and lentils.
9000498P19 $647.00
SD_H5825 END SHEARS
727078 Rotary Shear Ready
Cutting shears are mounted on the ends of the head. Help cut
through downed, tangled, and green crops.Includes brackets,
hoses, and valve cartridge to direct oil to rotary shear at both
ends of header.
9001223P53 $1,589.00
OPTIONAL EQUIPMENT
DRAPER HEAD OPTIONS
Page 135
-HT2G 01
MEGACUTTER™ 512
US PRICE LIST
-HT2G 01 0034 000 01-SEP-17 Page 134 of 160
(Port of Entry)
Standard Equipment
MEGACUTTER 512 SALES FEATURES SKID SHOE SPECIFICATIONS
New Holland MegaCutter™ 512 front -Standard Four(4) 1 5/8in.
mounted disc mower-conditioner with (40mm) raised skid
wide 11 ft.10 in. cut provides mower shoes and five (5)
overlap when combined with 20 mm low skid shoes.
MegaCutter530 rear mounted
model.The arge overlap provides -Optional: Four(4) additional
additional compensation when turning 1 5/8in.(40mm) skid
and when working on side hills without shoes provides nearly
complicated hydraulic offset functions. full coverage.
MC512 Front Mounted Mower- SWATH SPECIFICATIONS
Conditioner -Windrow Shields Adjustable
-Attachment A Frame Coupler
-Coupler Standard V-TINE FLAIL CONDITIONER
-Head Tilt Hitch Top-link SPECIFICATIONS
-Head Flotation Adjustable Springs -Design Semi-Swinging “V”
-Floatation Geometry Up & Transverse -Tine Mounting Tangential
-Vertical 27.5 in. -Tine Material Formed Steel
-Transverse 24° -Num. Tines 86
-Transport Width 10 ft.11in.(3.4m) -Rotor Speed
-Headland Clearance 15.7in.(400mm) Standard 600 rpm
Alternate 900 rpm
CUTTERBAR SPECIFICATIONS Speed Change Pulley swap
-Cutting Width 11 ft.10 in. -Intensity Adjustable Hood
-Cutting Height 2 - 4 in.
-Num. Discs 9 DRIVE SPECIFICATIONS
-Disc Profile Round -Primary PTO Std. U-Joint
-Disc Speed 3000rpm -Secondary PTO
-Crop Lifters Optional Slip Clutch Standard
-Knives/Disc 2 Overrunning Clutch Standard
-Knives Reversible
-Type Low-Profile Spur
gear drive, common TRACTOR REQUIREMENTS
sump fully-welded -Front Hitch Cat-II
disc cutterbar with -Input speed 1000 rpm
full width support. -PTO Rotation CW or CCW
-Protection Shear key -Std. PTO Yoke 1 3/8 – 6S
-Rock guard Hardened steel rock (T6 & T7 Series)
guard and skid shoe -Opt. PTO Yoke 1 3/8 – 21S
(T8 Series)
-Power Req. 90 hp
Page 136
-HT2G 01
MEGACUTTER™ 512
US PRICE LIST
-HT2G 01 0034 000 01-SEP-17 Page 135 of 160
(Port of Entry)
Standard Equipment
BASIC MC512 TRACTOR REQUIREMENTS -Electrical Req. None
-Front Axle NON SUPERSTEER™
AXLES ONLY! -Recommended Tractor Options
-Front Hitch Cat II Auto Guidance
-PTO Speed 1000 RPM PTO Transport Rotary Beacon
-PTO Rotation CW or CCW 30 mph/50 kph Trans.
-PTO Stub 1 3/8-6S or 21S Reversing cooling fan
-PTO Power Rating
Minimum 90 hp Recommended Tractor Models
Recommended
-Hydraulic Req.
105 hp
1 SA or Front
header lift kit
option for use with
-T6.155
-T7.270
-T8.350
&
&
&
Larger
Larger
Larger
- MC512
- MC512
- MC512
Only
& MC530
& MC530
MC530 model
-Hyd. Flow Rate 6.5-13.25 gpm
-Hyd. Pressure 2175-2900 psi
Models
COMMERCIAL MODEL Weight Factory Data List Price
MEGACUTTER 512 2,976 LB 9022011P99 $28,587.00
Page 137
-HT2G 01
MEGACUTTER™ 512
US PRICE LIST
-HT2G 01 0034 000 01-SEP-17 Page 136 of 160
(Port of Entry)
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_50100 SKID SHOE KIT
726934 1 5/8"(40MM)skidshoes set of 4
Kit of four (4), 40 mm height with 2 to 4 inch cutting range. Kit
provides additional four standard cutting height raised skid shoes
to match the four standard shoes on MegaCutter 512 to provide
eight (8) equal height shoes for improved flotation.
(RECOMMENDED: ALSO ORDER ADDITIONAL 40 mm SKID SHOE
KIT QUANTITY OF 8 SHOES FOR PAIRED MEGACUTTER 530)
32LBS 9000444P29 $577.00
SD_C5832 SKID SHOE
726933 3/4"(20mm) Skid Shoes set of 4
Kit of four (4), 20 mm height with 1 to 3 inch cutting range. Kit
providesfour (4) low cutting height skid shoes to replace four (4)
standard 40 mm height shoes. Recommended when cutting height
of less than 2 inches is required and for cutting down and tangled
crop.
(RECOMMENDED: ALSO ORDER ADDITIONAL 20 mm SKID SHOE
KIT QUANTITY OF 8 SHOES FOR PAIRED MEGACUTTER 530)
28LBS 9000339P57 $441.00
SD_H6210 1-3/8 21 SPLINE PTO
726936 1-3/8 21 SPLINE PTO
PTO Yoke ONLY – Recommended for T8 Series Tractors with
1 3/8-in 21 spline front PTO.
2LBS 9000190P96 $248.00
SD_H6212 CAT II A-Frame Quick Hitch
726939 CAT II A-Frame Quick Hitch
Required to attach the MegaCutter™ 512 Front Mount to
the front three point hitch.
If the customer already has an A-Frame Quick Hitch from
another implement you may deselect this option.
37LBS No Charge
XH6212X NO CAT II A-Frame Quick Hitch (900765P38) ($994.00)
MEGACUTTER OPTIONS
MEGACUTTER OPTIONS
Page 138
-HT2G 01
MEGACUTTER™ 512
US PRICE LIST
-HT2G 01 0034 000 01-SEP-17 Page 137 of 160
(Port of Entry)
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price 726933006 20MM HI SKID SHOES 28 LB 9000339P57 $441.00
726934006 40MM HI SKID SHOES 32 LB 9000444P29 $577.00
726935006 CROP DIVIDERS
Kit provides 1 Right and 1 Left crop divider improving separation
of cut and un-cut crop in tangled crop conditions.
10 LB 9000302P61 $393.00
726936006 1-3/8 21 SPLINE PTO
PTO Yoke ONLY – Recommended for T8 Series Tractors with
1 3/8-in 21 spline front PTO. Validate Tractor specifications
before ordering.
ONLY FITS MY2016 & Current MC512 UNITS
2 LB 9000190P96 $248.00
726939006 TRI HITCH CAT II
MegaCutter™512 is supplied with CAT II A-Frame Front Quick
Hitch unless ordered “NO-CAT II A-FRAME” option was selected
at the time of order placement.
37 LB 9000765P38 $994.00
726949006 Check Chain Kit
Check Chain kit prevents inadvertent lowering of front three-point
hitch by the operator to maintain proper flotation settings.
NEVER OPERATE FRONT HITCH IN POWER DOWN MODE.
15 LB 9000274P12 $356.00
Page 139
-HT2G 02
MEGACUTTER™ 530
US PRICE LIST
-HT2G 02 0034 000 01-SEP-17 Page 138 of 160
(Port of Entry)
Standard Equipment
New Holland MegaCutter™ mounted the flail tines to pass obstructions
triple mower-conditioners offer big and prevent the tines from swinging
capacity, maximum efficiency, and overcenter maintaining the proper
more versatility for today's large livestock position for crop pickup.
operations and custom harvesters. -Rotor and adjustable
MegaCutter 530 KEY SALES FEATURES conditioning hood provides a wide
-16 Discs , 29 ft. 6in. Cut width with range of conditioning intensities to
a capacity up to 43 acres per hour suited both delicate legumes and
at 14 mph & 85% efficiency more robust grass crops.
-2 Blade, Round Disc Profile
-Fully welded design with integral **BASIC TRACTOR REQUIREMENTS
cutterbar support FOR MEGACUTTER 512/530 SYSTEM**
-Continuous Oil Sump Gear-to-Gear -NON SUPERSTEER™ AXLE ONLY
drive with drive protection system -Cat II Front Hitch - 1000 RPM PTO
- Balanced Spring Suspension 1 3/8-6 CW or CCW Front PTO
with non-stop safety breakaway Opt. 1 3/8-21 YOKE
mechanism. -CAT II & III Rear Hitch - 1000 RPM PTO
-Tangential Mounted V-Tine Flails *NON QUICK HITCH ONLY*
144 Flail Tines 1 3/8-21 Std. Rotation
600 RPM Standard Opt. 1 3/4-20 YOKE
900 RPM Optional -Basic Hydraulic Requirements
-Brake, flasher, turn signal lights -Closed Center Load Sensing
- SMV sign (CCLS) with remote load sensing
-1 5/8" (40mm) skid shoes (Qty. 8) connection to activate and
Disc Cutterbar provide hydraulic flow as
-Fully welded, disc cutterbar with required by the implement or
integral box support frame ideal for Hyd. Power beyond.
tractor mounted applications -Flow Rate 6.5-13.25 gpm
-Continuous Oil Sump, Gear-to-Gear -Pressure 2175-2900 psi
Drive with drive protection system -Front - 1 SA Remote
-Round disc profile is less susceptible -Rear - 1 LS and 1 DA Remote
to damage than oval discs.
-2 in to 4 in cutting height range -Basic Electrical Requirements
-Eight (8) 1 5/8" (40mm) raised skid 12-V 3-PIN Connector
shoes and eight (8) 20 mm low skid 7-PIN Lighting Connector
shoes. -MIN/MAX TRACTOR PTO HP
-Optional: Eight (8) additional Minimum 195 PTO HP
40 mm skid shoes provides full Recommended 215 PTO HP
cutterbar coverage -Recommended Tractor Options
Conditioning System Auto Guidance
-Tangential mounted V-tines provide Rotary Beacon
additional outward crop pressure for 30 mph/50 kph Trans.
improved conditioning quality and a Reversing cooling fan
more uniform swath formation. CCLS – Hyd. Power beyond
-Semi-Swinging V-tine Concept allows
Page 140
-HT2G 02
MEGACUTTER™ 530
US PRICE LIST
-HT2G 02 0034 000 01-SEP-17 Page 139 of 160
(Port of Entry)
Standard Equipment
MegaCutter 530 Control Options: -Basic Hydraulic Requirements
-Joystick Control with back lit LCD -Closed Center Load Sensing (CCLS)
Screen for ISOBUS tractors, with or with remote load sensing connec-
without Virtual Terminal Monitor. tion to activate and provide
-Joystick Control with backlit LCD hydraulic flow as required by the
Screen for NON-ISOBUS complaint implement.
tractors -Flow Rate 6.5-13.25 gpm
-NO Joystick control, FOR USE ONLY (25-50 lpm)
with Virtual Terminal equipped -Presure 2175-2900 psi
tractors and/or programmable 150-200 bar
ISOBUS multi-function handle -Front - 1 SA Remote
buttons. -Rear - 1 LS and 1 DA Remote
***Factory Default: Joystick Control Weight 7090lbs (3216kg)
for NON-ISOBUS tractors*** Elec. Req. 12V 3-PIN & 7-PIN
lighting connector
MegaCutter 530 SPECIFICATIONS INDIVIDUAL HEAD DRIVELINES
Cutting Width 29 ft. 6 in. (9.0m) Independent Friction Slip Clutch
Cutting Height 2 to 4 in. Independent Overrunning Clutch
Num. Discs 16 (8x2)
Headland Lift 24 in. (60cm) OPTIONAL EQUIPMENT
PTO Speed 1000 RPM -MegaCutter 530
PTO Coupler 1 3/8 - 21 Spline 1 3/4-20 Spline PTO Yoke
Power Req. 210hp (155kw) Flat or 3/4" (20mm) Skid Shoes
Hitch Cat II & III Flip Over Wide Spread Kit
*NOT QUICK HITCH COMPATIBLE* Crop Divider Kit
900 RPM Rotor Kit
WARRANTY
-New Holland Standard Warranty
Applies
Models
COMMERCIAL MODEL Weight Factory Data List Price
MEGACUTTER 530 7,090 LB 9052221P40 $67,820.00
Page 141
-HT2G 02
MEGACUTTER™ 530
US PRICE LIST
-HT2G 02 0034 000 01-SEP-17 Page 140 of 160
(Port of Entry)
Factory Supplied Options
Order Code Description Weight Factory Data List Price
SD_50100 SKID SHOE KIT
726954 1 5/8"(40MM)skidshoes set of 8
Kit of eight (8), 40 mm height with 2 to 4 inch cutting range. Kit
provides additional eight standard cutting height raised skid shoes
to match the eight standard shoes on MegaCutter 530 to provide
eight (16) equal height shoes for improved flotation.
(RECOMMENDED: ALSO ORDER ADDITIONAL 40 mm SKID SHOE
KIT QUANTITY OF 4 SHOES FOR PAIRED MEGACUTTER 512)
64LBS 9000886P27 $1,151.00
SD_50145 JOYSTICK
X50145X No Joystick
NO JOYSTICK CONTROL OPTION: FOR USE ONLY WITH ISOBUS
COMPLIANT TRACTORS EQUIPPED WITH VIRTUAL TERMINAL
MONITOR AND/OR PROGRAMABLE ISOBUS BUTTONS ON MULTI
FUNCTION HANDLE.
No Charge
727185 JOYSTICK CNT-ISOBUS
Joystick control with back lit LCD display screen for use with
ISOBUS tractors, with or without Virtual Terminal. Option comes
with pre-loaded software necessary for use with ISOBUS compliant
tractor. Tractors must have ISOBUS terminals to link MegaCutter
530 to the tractor ISOBUS system and the Joystick Controller.
9001139P60 $1,480.00
727186 JOYSTICK NON-ISOBUS
Joystick control with back lit LCD display screen for use with NON
ISOBUS compliant tractors. Option comes with additional harness
and pre-loaded software to connect MegaCutter 530 directly to
the Joystick control without interfacing tractor ISOBUS systems.
9001429P12 $1,856.00
SD_C5832 SKID SHOE
726953 3/4"(20mm) Skid Shoes set of 8
Kit of eight (8), 20 mm height with 1 to 3 inch cutting range.
Kit provides eight (8) low cutting height skid shoes to replace
eight (8) standard 40 mm height shoes. Recommended when
cutting height of less than 2 inches is required and for cutting
down and tangled crop.
(RECOMMENDED: ALSO ORDER ADDITIONAL 20 mm SKID SHOE
KIT QUANTITY OF 8 SHOES FOR PAIRED MEGACUTTER 512)
56LBS 9000680P68 $884.00
SD_H6211 1-3/4 20 SPLINE PTO
726937 1-3/4 20 SPLINE PTO
PTO Yoke ONLY – Recommended for T7/T8 Series Tractors with
1 3/4-in 20 spline rear PTO.
4LBS 9000190P96 $248.00
Page 142
-HT2G 02
MEGACUTTER™ 530
US PRICE LIST
-HT2G 02 0034 000 01-SEP-17 Page 141 of 160
(Port of Entry)
SD_H6213 FLIP-OVER SWATH GATE
726940 Flip-Over Swath Gate
Allows for quick conversion between wide & thin crop spreading
and windrowing; for use with MegaCutter™ 530 only.
90LBS 9001700P93 $2,209.00
Page 143
-HT2G 02
MEGACUTTER™ 530
US PRICE LIST
-HT2G 02 0034 000 01-SEP-17 Page 142 of 160
(Port of Entry)
Factory Supplied Attachments
Order Code Description Weight Factory Data List Price
726935016 CROP DIVIDERS
Kit provides 1 Right and 1 Left crop divider improving separation
of cut and un-cut crop in tangled crop conditions.
18 LB 9000451P22 $586.00
726937006 1-3/4 20 SPLINE PTO
PTO Yoke ONLY – Recommended for T7/T8 Series Tractors with
1 3/4-in 20 spline rear PTO. Validate Tractor specifications before
ordering!
ONLY FITS MY2016 & Current MC530 UNITS
4 LB 9000190P96 $248.00
726940006 FLIP OVER SWATH GATE
Kit provides manual flip-over swathing boards for MegaCutter™
530 heads for wide crop spreading
90 LB 9001700P93 $2,209.00
726970016 FRT HDR LIFT KIT
MY2016 AND CURRENT PRODUCTION - Kit provides hydraulic
connection from MegaCutter™ 512 front mower lift circuit to
MegaCutter™ 530 rear mower controls enhancing operator
convenience.
15 LB 9000906P29 $1,177.00
726988006 Conditioner Speed Up-Both Wings
MY2013 AND CURRENT PRODUCTION - Increases conditioning
rotor speed of MegaCutter™ 530 to 900 rpm (Standard 600 rpm)
for enhanced conditioning of robustgrass crops.
NO KIT is required for MegaCutter 512 front mower.
9 LB 9001104P18 $1,434.00
726968006 Conditioner Speed Reduction-Both Wings
MY2012 PRODUCTION - Conditioning rotor speed reduction of
MegaCutter™ 530 to 600 rpm (Standard 900 rpm) for enhanced
conditioning of delcate legumes.
NO KIT is required for MegaCutter 512 front mower.
40 LB 9001104P18 $1,434.00
726953006 20MM HI SS SET OF 8
Kit of eight (8), 20 mm height with 1 to 3 inch cutting range.
Kit provides eight (8) low cutting height skid shoes to replace
eight (8) standard 40 mm height shoes. Recommended when
cutting height of less than 2 inches is required and for cutting
down and tangled crop.
(RECOMMENDED: ALSO ORDER ADDITIONAL 20 mm SKID
SHOE KIT QUANTITY OF 8 SHOES FOR PAIRED
MEGACUTTER 512)
56 LB 9000680P68 $884.00
726954006 '0MM HI SS SET OF 8
Kit of eight (8), 40 mm height with 2 to 4 inch cutting range. Kit
provides additional eight standard cutting height raised skid shoes
to match the eight standard shoes on MegaCutter 530 to provide
eight (16) equal height shoes for improved flotation.
(RECOMMENDED: ALSO ORDER ADDITIONAL 40 mm SKID
SHOE KIT QUANTITY OF 4 SHOES FOR PAIRED
MEGACUTTER 512)
64 LB 9000886P27 $1,151.00
Page 144
PARTS DIVISION SUPPLIED ACCESSORIES FOR CURRENT DISC MOWERS
Part Number Description Installation
Hours H6730 H6740 H6750 H6830
86560107 Left-hand Swath Kit 0.5 X X X
717355006 Right-side Swathboard -- X X X
715289026 High Stubble Kit (includes 8 skid shoes) - increases cut height by 1.3 inches -- X X X X
87580643 Shock Hub Repair Kit -- X X X X
87666925 Transport Light Kit - includes wiring harness with 7-pin tractor connector, mounting brackets and lights -- X
84524277 Rear half secondary PTO assembly with constant velocity driveline that permits operation in transport and
operating positions while manuvering around obstacles. --
X
PARTS DIVISION SUPPLIED ACCESSORIES FOR PREVIOUS GENERATION DISC MOWERS
Part Number Description Installation
Hours 615 616 617
86560107 Left-hand Swath Kit 0.5 X X X
717355006 Right-side Swathboard -- X X X
715289026 High Stubble Kit (includes 8 skid shoes) - increases cut heigth by 1.3 inches -- X X X
87580643 Shock Hub Repair Kit (if unit has been retrofitted w/shock hubs) -- X X X
87602273 Shock Hub Retrofit Kit (retrofits 2 discs). Fits all prior model NH- 600 Series disc mowers. Order quantity to match
number of discs to retrofit. Quantity of 1 kit retrofits two discs. -- X X X P
age 1
43 o
f 160
Page 145
PARTS DIVISION SUPPLIED ACCESSORIES FOR CURRENT SIDE PULL DISC MOWER CONDITIONERS
Part Number
Description
Installation
Hours
H7220
H7320
H7230
H7330
715264006 Hydraulic header tilt kit 0.8 X X
86603195 Crop Guide on right side - for down and lodged viney crops -- X X X X
86538996 Low speed rotor kit - for 730 rpm rotor speed -- X
716537036 Textured hood liner kit -- X
439037016 540 RPM primary PTO assembly -- X X
715291026 1000 RPM primary PTO assembly (1 3/8 in., 21 spline) -- X X
87298929 Quick Hitch Bushing Adapter Kit (2-point swivel hitch only) -- X X
716548006 Tow Bar - for 2 point swivel hitch. Includes transport chain and hardware. -- X X
715289026 High Stubble Kit (includes 8 skid shoes) increases cutting height by 1.3 in. -- X X X X
87580643 Shock Hub Repair Kit -- X X X X
84164009 Roll Deflector Kit 1.0 X X X X
87528245 Clockwise Crop Lifter Kit 0.8 X X X X
87528249 Counter-Clockwise Crop Lifter Kit 0.8 X X X X
84267895 Swathgate Crop Spreader Fins Kit 0.5 X X
84268166 Drawbar Hitch Conversion Kit 1.5 X X
84268163 2 Point Hitch Conversion Kit 1.5 X X
Page 1
44 o
f 160
Page 146
PARTS DIVISION SUPPLIED ACCESSORIES FOR CURRENT CENTER PIVOT DISC MOWER CONDITIONERS
Part Number Description Installation
Hours
Discbine
313
Discbine
316
47422576 Shock Hub Repair Kit 0.5 X X
715289056 High stubble kit (includes 8 skid shoes) 1.5 X X
47502641 Low speed rotor kit - for 750 rpm rotor speed (flail models only) 0.5 X X
716537066 Textured hood liner kit 2.0 X X
87532974 Corner marker kit 0.5 X X
87524917 Rolling Crop Divider Kit -- X X
87298929 Quick Hitch Bushing Adapter Kit (2-pt swivel hitch only) -- X X
47916283 Drum (cane) Paddle Kit X X
717002036 Crop Divider Kit 1.0 X X
415017016 Adjustable Skid Shoe Kit 1.5 X X
439045006 Cane/Biomass Harvesting Kit (Super High skidshoes, mid ht lockouts) 2.0 X X
716695056 Tall Crop Push Bar 1.5 X X
47945279
Quick-change knife conversion kit- one disc- order multiples as necessary. For discs w/o lifters; includes rock
guard (new rock guard is not required if existing rock guard has two relief slots for the special tool already in the
casting). MY14 only. Must also order: 1- 84190453 tool and 1- 47408404 tool holder.
1.0
X
X
47945278 Quick-change knife conversion kit- one disc- order multiples as necessary. For discs w/lifters; no rock guard included. MY15 forward. Must also order: 1- 84190453 tool and 1- 47408404 tool holder
1.0 X X
47945281
Quick-change knife conversion kit- one disc- order multiples as necessary. For discs w/lifters; includes rock guard
(new rock guard is not required if existing rock guard has two relief slots for the special tool already in the casting). MY14 only. Must also order: 1- 84190453 tool and 1- 47408404 tool holder
1.0
X
X
47945277 Quick-change knife conversion kit- one disc- order multiples as necessary. For discs w/o lifters; no rock guard included. MY15 forward. Must also order: 1- 84190453 tool and 1- 47408404 tool holder
1.0 X X
47692798 Draw Bar Hitch Conversion Kit 2.0 X X
47507424 Two-Point Hitch Conversion Kit 2.0 X X
716548006 Tow Bar - for 2 point swivel hitch. Includes transport chain and hardware. -- X X
87737194 1-3/4 in., 20 tooth spline yoke for 1000 rpm primary PTO -- X X
86578390 2-point swivel hitch Cat 3 attachment pins -- X X
47825435 Crop Lifter Kit - Includes the parts necessary to add lifters to one CW and one CCW disc- order in multiples as required.
0.5 X X
47966443 Tall Crop Extension Kit- RH crop guide kit must also be installed X
47965450 Right-Hand Crop Guide (stovepipe) Kit X X
Page 1
45 o
f 160
Page 147
PARTS DIVISION SUPPLIED ACCESSORIES FOR PRIOR GENERATION SIDE PULL DISC MOWER CONDITIONERS
Part Number
Description
Installation
Hours
1409
1410
1411
1412
715264006 Hydraulic header tilt kit 0.8 X X
86603195 Crop Guide on right side - for down and lodged viney crops -- X X X X
86538996 Low speed rotor kit - for 730 rpm rotor speed -- X
716537036 Textured hood liner kit -- X
715290026 540 RPM primary PTO assembly -- X X
715291026 1000 RPM primary PTO assembly (1 3/8 in., 21 spline) -- X X
715289026 High Stubble Kit (includes 8 skid shoes) increases cutting height by 1.3 in. -- X X X X
84294042 Steel Chevron Conditioning Roll (Top) -- X X
84294045 Steel Chevron Conditioning Roll (Bottom) -- X X
84164009 Roll Deflector Kit 1.0 X X X X
87528245 Clockwise Crop Lifter Kit 0.8 X X X X
87528249 Counter-Clockwise Crop Lifter Kit 0.8 X X X X
PARTS DIVISION SUPPLIED ACCESSORIES FOR PRIOR GENERATION CENTER PIVOT DISC MOWER CONDITIONERS
Part Number Description Installation
Hours H7450 H7550 H7460 H7560
87532974 Corner marker kit 0.5 X X X X
86605015 Low speed rotor kit - for 726 rpm rotor speed -- X X
47754471 Textured hood liner kit -- X X
86539412 1-3/4 in., 20 tooth spline yoke for 1000 rpm primary PTO on standard tongue versions -- X X
87737194 1-3/4 in., 20 tooth spline yoke for 1000 rpm primary PTO on swivel hitch (2-point and drawbar) versions -- X X X X
86578390 2-point swivel hitch Cat 3 attachment pins - for MY2006 & Later (prior to MY2006 was standard equipment) -- X X X X
87298929 Quick Hitch Bushing Adapter Kit (2-point swivel hitch only) -- X X X X
716422001 Tire bumper extension (standard tongue models only) for certain tractor/tire configurations to prevent PTO damage. See Operators Manual
-- X X
716548006 Tow Bar - for 2 point swivel hitch. Includes transport chain and hardware. -- X X X X
86632264 Low speed conditioning roll drive (640 RPM) - Driven Sheave -- X X
86627810 Low speed conditioning roll drive (640 RPM) - Drive Belt -- X X
715289026 High Stubble Kit (includes 8 skid shoes) increases cutting height by 1.3 in. -- X X X X
87580643 Shock Hub Repair Kit -- X X X X
84164009 Roll Deflector Kit 1.0 X X X X
87528245 Clockwise Crop Lifter Kit 0.8 X X X X
87528249 Counter-Clockwise Crop Lifter Kit 0.8 X X X X
84267895 Swathgate Crop Spreader Fins Kit 0.5 X X X X
87528440 Cane Paddle Kit 0.2 X X X X
87524917 Rolling Crop Dividers 1.0 X X X X
717002026 Crop Divider Kit 1.0 X X X X
47637996 Tall Drum Kit 0.5 X X
87058701 Tall Crop Kit 5.5 X X
Page 1
46 o
f 160
Page 148
PARTS DIVISION SUPPLIED ACCESSORIES FOR CURRENT SICKLE MOWER-CONDITIONERS
Part Number Description 472 488 H7150
164029 Push bar extension kit X X
847590 SMV spade mount X X
195036 SMV pole mount X X
86547710 SMV sign X X
201725 Spare knife holder X X
578205 Left side crop divider X X
850116 Safety tow chain for model 472 serial number 901669 and below; model 488 serial number 902153 and below;
model 499 serial number 666799 and below X X
855228 Safety tow chain hardware kit (required for 850116) for model 472 serial number 901669 and below; model 488
serial number 902153 and below; model 499 serial number 666799 and below X X
86626520 Chain loop weld assembly (use with 850116 on hitch extension for serial number 520586 and above) X X
84141278 1-3/4 inch front PTO yoke, 20 spline X
715307001 Hydraulic lift kit (includes hose and cylinder) X X
87486127 Tongue mounted swiveling pump retrofit kit for 14' & 16' cutting width trail frames. Converts model 1475 to H7150
design tongue mounted swiveling pump, hitch, and PTO hook up.
X
87486128 Tongue mounted swiveling pump retrofit kit for 18' cutting width trail frames. Converts model 1475 to H7150
design tongue mounted swiveling pump, hitch, and PTO hook up. No longer available- order components.
X
Page 1
47 o
f 160
Page 149
PARTS DIVISION SUPPLIED ACCESSORIES FOR CURRENT DISC HEADERS
Part Number Description Installation
Hours
Durabine
416
Durabine
419
717002036 Crop Dividers (right and left included) 1.0 X X
84395614 Rolling Crop Dividers - kit of 3 discs; 3 required for each end 0.5 X X
715289056 High Stubble Kit - (includes 10 skid shoes) increases cutting height range from 3-6.25" 1.5 X X
87532974 Corner Marker Kit (for corner visibility during operation and transport 0.5 X X
716695036 Push Bar and Divider kit (for tall crops) 1.0 X X
715301076 Gauge Wheels (set of 2) , must also order LH support # 84319644 and RH support 84319645 from Service Parts to complete installation.
1.0 X X
47422576 Shock Hub Repair Kit 0.5 X X
86620746 37-tooth driven sprocket for auger on Durabine 416 Disc Header for Specialty Crops. Reduces auger speed
by 10%. -- X
717701016 60 inch opening Closure Kit (required for use when the conditioner module is removed) 1.0 X X
717702016 83 inch opening Closure Kit (required for use when the conditioner module is removed) 1.0 X X
47668014 Full-Coverage Skid Shoe Kit- adds fill-in shoes between module-mounted shoes (19' header also requires 1-
47668755 to completely cover the cutterbar) 1.5 X X
47668755 Full-Coverage Skid Shoe Add-On Kit- for 19' header only 1.5 X
47945277 Quick-Change Knife Conversion Kit- one disc- order multiples as necessary. For discs w/o lifters; no rock
guard included. MY15 forward. Must also order: 1- 84190453 tool and 1- 47408404 tool holder. 1.0 X X
47945279 Quick-Change Knife Conversion Kit- one disc- order multiples as necessary. MY14 and prior. For discs w/o lifters; includes rock guard. Must also order: 1- 84190453 tool and 1- 47408404 tool holder.
1.0 X X
47945278 Quick-Change Knife Conversion Kit- one disc- order multiples as necessary. MY15 forward. For discs
w/lifters; no rock guard included. Must also order: 1- 84190453 tool and 1- 47408404 tool holder. 1.0 X X
47945281 Quick-Change Knife Conversion Kit- one disc- order multiples as necessary. MY14 and prior. For discs
w/lifters; includes rock guard Must also order: 1- 84190453 tool and 1- 47408404 tool holder. 1.0 X X
84190453 Quick-Change Knife tool. Tool is required to remove the quick change knives from the disc. -- X X
47408404 Quick-Change Knife Tool Holder. Includes braket that mounts to back of header for storage of quick-change knife tool.
-- X X
47825435 Crop Lifter Kit - Includes the parts necessary to add lifters to one CW and one CCW disc- order in multiples
as required. 0.5 X X
717364026 High-Contact Conditioner Module- complete conditioner. If replacing a flail conditioner, PTO shafts are also
required. -- X X
716939056 Chevron Rubber Conditioner Module- complete conditioner. If replacing a flail conditioner, PTO shafts are also required.
-- X X
717720016 Chevron Steel Conditioner Module- complete conditioner. If replacing a flail conditioner, PTO shafts are also
required. -- X X
717959006 Flail Conditioner Module- complete conditioner. If replacing a roll conditioner, PTO shaft is also required. X
415017026 Adjustable Skid Shoes -- Set of 2 must also order LH support #47754905 and RH support 47754907 from
Service Parts to complete installation on a Durabine 419 header. 0.5 X X
47510965 Poppet Coupler Kit- provides parts for disc head only. 0.5 X X
47510963 Poppet Coupler Kit- provides parts for disc head and windrower. 1.0 X X
47522054 Adapter kit to operate disc head on draper ready windrower X X
Page 1
48 o
f 160
Page 150
PARTS DIVISION SUPPLIED ACCESSORIES FOR PRIOR GENERATION SP WINDROWER AND BIDIRECTIONAL™ TRACTOR DISC HEADS
Part Number
Description
Approx.
Install Time
(Hrs.)
720HD
750HD
770HD
720TD**
820TD**
84294053 Steel chevron conditioning roll (top) 2 X X X X
84294055 Steel chevron conditioning roll (bottom) 2 X X X X
86594327 Slatted steel conditioner rolls (for aggressive conditioning of cane-type crops). Order two to complete a machine. Refer to Service Bulletin 2000/7 - H5 for additional parts and installation requirements.
4
X X X X
86620746 37 - tooth driven sprocket for auger drive on model 750HD Specialty Head only. Reduces auger speed by 10%.
0.3
X
87010547 Auger flighting reinforcement kit 4 X
87379229 High contact conditioning rolls (order quantity of 2 to complete a head). Compatible with 2355, 2358, 750HD and 770HD heads. Allow 4 months order lead time.
5
X X
87580643 Standard MowMax™ ShockPRO™ hub replacement kit 0.15 X X X X X
715289026 High stubble kit (includes 8 skid shoes) - increases cutting height by 1.3 inches (33mm) 1.5 X X X X X
715301056 Gauge wheels (set of 2) 0.6 X X
47754471 Textured liner kit - provides more aggressive conditioning 0.5 X
716695036 Push bar and divider kit (for tall crops) 0.5 X X X X X
87524917 Rolling crop dividers- kit of 2 disc; 2 required for each end 1 X X X X X
87532974 Corner marker kit - for better visibility of the head ends for operation and transport 0.5 X X X X X
717002026 Crop dividers - pair of 2 dividers; one for each end of head 0.5 X X X X X
717701006 60-inch opening closure kit (required for use when the conditioner module is removed). 0.5 X X
717702006 83-inch opening closure kit (required for use when the conditioner module is removed). 0.5 X X
Page 1
49 o
f 160
Page 151
PARTS DIVISION SUPPLIED ACCESSORIES FOR CURRENT HS HAYBINE® HEADS AND 2330BF ADAPTER FRAME
Part Number
Description
Installation
Hours
HS12
HS14
HS16
HS18
2330BF
Adapter
Frame
715295006 Crop Dividers (right and left included) 1.5 X X X X
715301066 Gauge Wheels (set of 4) 1.0 X X X
716961076 Hydraulic Reel Drive Kit (must be used in combination with base SP Windrower auxiliary hydraulic pump and
hydraulic reel kit to be functional) 2.0 X X X X
87010392 Reel Truss Kit - 12,14 & 16-foot 1.0 X X X
87010393 Reel Truss Kit - 18-foot 1.0 X
86637579 Push Bar Extension Kit (for tall or cane-type crops). For SPW application only. 1.0 X X X X
86540464 Left-hand Wear Plate (for conditioner throat opening when in abrasive soil conditions) 0.3 X X X X
86540465 Right-hand Wear Plate (for conditioner throat opening when in abrasive soil conditions) 0.3 X X X X
86643154 Discharge opening Closure kit (recommended for light hay conditions) 1.5 X X X X
86614722 Stainless Steel Replacement Floor Inserts [includes (1) center] - must also order outer floor inserts 0.3 X X X X
86614719 Stainless Steel Replacement Floor Inserts [includes right and left outer] - 14 ft 0.3 X
86614720 Stainless Steel Replacement Floor Inserts [includes right and left outer] - 16 ft 0.3 X
86614721 Stainless Steel Replacement Floor Inserts [includes right and left outer] - 18 ft 0.3 X
87399670 Stub Guard Conversion Kit -- X X
87399912 Stub Guard Conversion Kit -- X X
439105006 Lift-arm extension kit (required for installation on MY15, 6-cyl. windrowers) 1.0
716988016 Adapter kit to adapt an HS series head to prior model 1475, serial number 673016 and below 2.0 X X X X
716988006
Kit to adapt an HS series head to prior model HW300, serial number 661082 and below; model HW320, serial
number 667225 and below or model 2450/2550. If the base unit does not have the head reverser kit installed,
order return hose (part number 870103333).
2.0
X
X
X
X
86594327 Slatted Steel Conditioner Rolls- (for aggressive conditioning of cane-type crops). Order two to complete a machine.
Refer to Service Bulletin 2000/7-H5 for additional parts and installation requirements. 4.0 X X X X
716990006 Completing Kit for 12- and 14-foot HS series heads 1.0 X
716991006 Completing Kit for 16- and 18-foot HS series heads 1.0 X
715318001 Hydraulic head tilt kit for HS Haybine heads 1.5 X
Page 1
50 o
f 160
Page 152
PARTS DIVISION SUPPLIED ACCESSORIES FOR CURRENT DRAPER HEADS
Part Number Description DuraSwath
425HB
DuraSwath
430HB
DuraSwath
436HB
DuraSwath
440HB
73356465
2-Wheel Header Transport W/O Tires & Whls- 30' and 36'. Includes two-piece tongue for LH end of header and
fold-up axle for RH end of header. Requires tires, wheels, hubs, spindles to be functional. No on-header storage if
castoring gauge wheels not chosen.
X
X
73356466 Adjustable End Skid Shoes- one adjustable shoe for each end of the header. X X X X
73356550 Adjustable Center Skid Shoes- two adjustable shoes for installation on center struts. (MY15 and forward X X X X
73356467 Floating Tip Dividers- recommended for hay and lentils. X X X X
73356469 Rotary Shear Ready Kit- Double-Swath models- includes brackets and valve cartridge to direct hydraulic oil to the
rotary shear at each end of the head. Hose lengths are identified and must be procured locally. X X X
73356675
Rotary Shear Ready- Center-Delivery only models- includes brackets and valve cartridge, and sequencing valve, to
direct hydraulic oil to the rotary shear at each end of the head. Hose lengths are identified and must be procured
locally.
X
X
X
X
73356771 Rotary Shear Hose Clamp Kit (prior to MY16) X X X X
47846497 In-Line Hydraulic Filter Kit (prior to MY16) X X X X
47999976 RH Reel Drive Upgrade Kit (prior to MY16) X X
47999978 LH Reel Drive Upgrade Kit (prior to MY16) X X
47979689 Castoring Gauge Whls W/O T&W- jack-type adjustment- 30, 36 and 40 ft.- Requires tires, wheels, hubs, spindles
to be functional.
X
X
X
47979658 Castoring Gauge Whl. Conversion Kit (from ratchet-style adjustment to jack-type adjustment) W/O T&W- 30, 36
and 40 ft.
X
X
X
73356551 Tires, Wheels, Hubs, Spindles- required for castoring gauge wheels and/or 2-wheel or 4-wheel transport option-
yellow wheels. X X X X
73356475 Cross (Pea) Auger - Std. Deck or Double Swath. X
73356476 Cross (Pea) Auger - Std. Deck or Double Swath. X
73356477 Cross (Pea) Auger - Standard Delivery. X
73356692 Poly Skid Shoe Kit- 25' Header w/Schumacher Cutting System- to add a full set of poly skids to an existing header. X
73356698 Poly Skid Shoe Kit- 25' Header w/CIH Cutting System- to add a full set of poly skids to an existing header. X
73356693 Poly Skid Shoe Kit- 30' Header w/Schumacher Cutting System- to add a full set of poly skids to an existing header.
X
73356699 Poly Skid Shoe Kit- 30' Header w/CIH Cutting System- to add a full set of poly skids to an existing header.
X
73356700 Poly Skid Shoe Kit- 36' Header w/Schumacher Cutting System- to add a full set of poly skids to an existing header.
X
73356694 Poly Skid Shoe Kit- 36' Header w/CIH Bee Cutting System- to add a full set of poly skids to an existing header.
X
73356695 Poly Skid Shoe Kit- 40' Header w/Schumacher Cutting System- to add a full set of poly skids to an existing header.
X
73356701 Poly Skid Shoe Kit- 40' Header w/CIH Cutting System- to add a full set of poly skids to an existing header. X
Page 1
51 o
f 160
Page 153
PARTS DIVISION SUPPLIED ACCESSORIES FOR CURRENT ROLABAR™ RAKES
Part Number Description 256 258 260 216
202905 Wide tire adaptor bundle X X X
850116 Safety tow chain, if not factory supplied X X X X
855228 Safety tow chain hardware kit, if not factory supplied (required for 850116) X X X X
86561593 BB900 Ball hitch receiver X
715268001 Hitch and jack assembly X X
715268002 Hitch and jack assembly X
715270001 Dolly wheel assembly with 15 in. wheels, less tires X X
715270002 Dolly wheel assembly with 15 in. wheels, less tires X
715273001 Flow control kit (for single 258 & 260 hydraulic rake operations only) X X
715281001 Front gauge wheel kit (set of 2) X
715282001 Rear gauge wheel kit (set of 2) X
86603165 15 in. wheels, less tires (set of 2). Recommended tire sizes for 15 in. wheels: 5.00-15 X X X
Page 1
52 o
f 160
Page 154
PARTS DIVISION SUPPLIED ACCESSORIES FOR CURRENT WHEEL RAKES
Part Number
Description
ProCart
ProCart +
Dura
Vee
817
Dura
Vee
1020
Dura
Vee
1225
Dura
Vee
1428
Dura
Vee
1631
Dura
Vee
1833
Dura
Vee
2036
H5980
87638948
Wind shielding kit for 55" wheels (quantity of 1
per wheel is required, order quantity to match
number of wheels to be fitted)Requires (14)
plastic cable ties, part number 263117 to install
each wind guard. (also fits HT152 and 154
rakes)
X
X
X
X
X
X
X
X
X
47709927
Wind shielding kit for 60" wheels (quantity of 1
per wheel is required, order quantity to match
number of wheels to be fitted). Requires (14)
plastic cable ties, part number 263117 to install
each wind guard.
X
X
X
X
73355370 Adjustable ball hitch; requires 2 5/16" ball on
tractor drawbar.
X
84241510 Adjustable ball hitch; requires 2 5/16" ball on
tractor drawbar.
X
Page 1
53 o
f 160
Page 155
PARTS DIVISION SUPPLIED ACCESSORIES FOR CURRENT WINDROWERS (Speedrower Series, T3 AND T4)
Part Number Description Installation
Hours
SR130 /
SR160
SR200 /
SR220
SR240 /
SR260
WEIGHTING AND BALLASTING KITS
84545478 Ballast weights- 50 lb. plates for built-in rear ballast box -- X X X
439129006 Ballast Hangar Kit- MY16. Includes hangar, hardware required to attach hangar, and hardware required to
retain suitcase weights. 5 X X X
47848459 Ballast Hangar Kit- MY15. Includes hangar, hardware required to attach hangar, and hardware required to
retain suitcase weights, and weld-on gussets for suspended rear axle models. 5 X X X
718215036 Ballast weights- 100 lb. cast suitcase weight for ballast hangar. -- X X X
439106006 Transport Ballast Box- to attach to the front of the base unit in place of the head for safe road transport. (NOT
COMPATIBLE W/4-CYL. NON-DRAPER UNITS DUE TO LIFT ARM WIDTH) -- X X X
HEADER ADAPTER KITS
716965136 Sickle head adapter kit f/MY2003 and later HS sickle headers 2 X X X
47522054 Adapter kit to operate disc head on draper ready windrower X X
47762504 Adapter kit to allow prior model HB header operation. To convert HB Series Draper with reel synchronization
valve. Do not order if draper head does not have reel synchronization. 2 X X X
47510965 Poppet-Style Couplers-disc header only. Provides couplers for header to allow attachment to a draper-ready
windrower. 0.5
X X
47510963 Poppet-Style Couplers-SPW- provides couplers for disc header and SPW 1 X X X
CAB KITS
47635415 Front windshield wiper/washer 3 X
47658591 In-cab controlled adjustable windrow shield kit 3 X X X
82004428 Front cab window sun screen kit - Included in Deluxe Cab factory option -- X X X
86627943 Rear cab window sun screen kit - Included in Deluxe Cab factory option -- X X X
47635180 Satellite Radio kit - Included in Deluxe Cab factory option 1.5 X X X
87027853 Electric-adjustable mirrors (adjust from inside cab). 3 X X X
84533462 High performance LED lighting. Order one kit for windrower front lighting, and a second for rear lighting. 0.8 X X X
73328580 Beacon (requires beacon mounting kit) X X X
87027859 Beacon Mounting Kit X X X
84814470 Panoramic Mirror- external mount to electric-adjustable mirrors on either side of cab (not compatible w/manual-
adjust mirrors)
X X X
87026387
Auxiliary Cab Entry Step- provides additional step to mount below existing bottom step. Particularly useful
w/larger front tires. Also requires (2) flexible side support strips #87025844 and mounting hardware
0.3
X
X
X
84381500 Extra-Quiet Cab Kit- to reduce cab noise levels by 63% (standard on deluxe cab models) 4 X X X
47703897 Rear Camera Kit- requires T-S display (MY15 and forward) -- X X X
Page 1
54 o
f 160
Page 156
PARTS DIVISION SUPPLIED ACCESSORIES FOR CURRENT WINDROWERS (Speedrower Series, T3 AND T4)
Part Number Description Installation
Hours
SR130 /
SR160
SR200 /
SR220
SR240 /
SR260
HYDRAULIC KITS
716961106
Hydraulic reel drive kit - - windrower base unit content. Used with model HS sickle heads ONLY. (Also
requires the following two kits: engine mounted auxiliary hydraulic pump (either factory installed or DIA kit),
and 716961076 model HS head hydraulic reel drive kit).
1.5
X
X
X
47795672 Engine-mounted auxiliary hydraulic gear pump and control valve-T4, 4-cyl. (non-draper) 3 X
47795677 Engine-mounted auxiliary hydraulic gear pump and control valve- T4, 4-cyl. (draper) 3 X
47795681 Engine-mounted auxiliary hydraulic gear pump and control valve- T3, 4-cyl. (non-draper) 3 X
47795695 Engine-mounted auxiliary hydraulic gear pump and control valve- T3, 4-cyl. (draper) 3 X
47795700 Engine-mounted auxiliary hydraulic gear pump and control valve for hyd. reel drive- T3 & T4, 6-cyl. 2.5 X X
47646567
Engine-mounted auxiliary hydraulic gear pump and control system for crop merger attachment. Includes all
parts necessary to add merger hydraulics/controls in the field. Merger must be ordered separately. T3 and T4,
6-cyl.
--
X
X
47710884 Lift arm power down kit - non-draper units only 2 X
47518199 Lift arm power down kit - 4 cyl. draper units and all 6 cyl. draper units 0.5 X X X
ENGINE KITS
47490210 Radiator chaff wiper blade kit- Installs in screen side of radiator to reduce chaff build up 2 X X
47490211 Radiator chaff wiper blade kit- Installs in screen side of radiator to reduce chaff build up 2 X
47644574 Cold starting aid- T4, 4-cyl. (grid heater only; also requires dealer installed second battery) -- X
47586289 Cold starting aid- T3, 4-cyl. (grid heater only; also requires dealer installed second battery) -- X
47644576 Cold starting aid- T4, 6-cyl. (grid heater) -- X X
87629024 Cold starting aid- T3, 6-cyl. (grid heater) -- X X
47741698 Fuel Cooler Kit- improves performance in high ambient temperatures (T4 models only) X X X
PRECISION FARMING
47842442
Guidance-ready kit. Includes steering sensor, wire harness, mount for nav controller/372 receiver, wire
connection for touch screen display. Nav Controller, Receiver and Monitor must be ordered separately. MY16
and prior.
12
X
X
X
48015782
Guidance-ready kit. Includes steering sensor, wire harness, mount for nav controller/372 receiver, wire
connection for touch screen display. Nav Controller, Receiver and Monitor must be ordered separately. MY17
and after.
12
X
X
X
47933785 GPS Receiver-Level 1. 372 GPS Receiver (WAAS/EGNOS/RangePoint RTX) Requires Auto Guidance
Ready or dealer installation of wiring. 0.5 X X X
47933790 GPS Receiver-Level 2. 372 GPS Receiver (WAAS/EGNOS/RangePoint RTX/HP/XP/ CenterPoint RTX)
Requires Auto Guidance Ready or dealer installation of wiring. 0.5 X X X
87518983 Navigation II Controller 0.5 X X X
Contact Parts IntelliView 4 display- REQUIRED for guidance applications (order display and hardware from parts) 0.2 X X X
439129006 Telematics Kit- MY 15 units require version 30 Firmware upgrade) 2 X X X
Page 1
55 o
f 160
Page 157
PARTS DIVISION SUPPLIED ACCESSORIES FOR CURRENT WINDROWERS (Speedrower Series, T3 AND T4)
Part Number Description Installation
Hours
SR130 /
SR160
SR200 /
SR220
SR240 /
SR260
MISCELLANEOUS
87634089
Swath roller hitch receiver kit. Includes a weld-on hitch receiver (2 in. by 2 in. or 5.08cm by 5.08cm). Hitch
extension must be procured locally. Only for use in towing a swath roller in field operation having a maximum
roller weight of 1000 lbs. (453 kg) and maximum vertical load of 150 lbs. (68 kg).
0.5
X
X
X
84059809 Service light (magnetic base with 32 ft. cord and 12v plug) -- X X X
87560864 Head lift arm quick latch kit. Replaces the standard manually installed head attaching lift arm locking pins-
non-draper only. 0.3 X
84598213 Head lift arm quick latch kit. Replaces the standard manually installed head attaching lift arm locking pins- 4-
cyl. draper ready and all 6-cyl. units 0.3
X X
87473378 Adjustable hay windrowing shield kit. Provides adjustable windrow shield for installation on all factory draper
ready windrower equipped with fixed drive motor shields. 1 X X X
47974207 Anti-Shimmy Shock Retrofit Kit- also requires two larger anti-shimmy shocks- #47918454. (Prior to MY17)
X X X
Page 1
56 o
f 160
Page 158
PARTS DIVISION SUPPLIED ACCESSORIES FOR PRIOR GENERATION WINDROWERS (8000 AND MY14 SPEEDROWER SERIES)
Part Number Description Installation
Hours
H8040 /
SR130
H8060 /
SR200
H8080 /
SR240
WEIGHTING AND BALLASTING KITS
84545478 Ballast weights- 50 lb. plates for built-in rear ballast box (SR Series only) -- X X X
47848496
Ballast Hangar Kit- includes hangar, hardware required to attach hangar, and hardware required to retain
suitcase weights, and weld-on gussets for suspended rear axle models. Also includes two steel housings to
allow the taillights to be removed from the rear bumper and install in the housings which are attached to the
outer ends of the ballast hangar. (SR Series only)
5
X
X
X
718215036 Ballast weights- 100 lb. cast suitcase weight for ballast hangar. (SR Series only) -- X X X
87581795
Standard rear axle weight carrier bracket (300 lb./136 kg). Weight carrier only, does not include ballast
weights. Suitcase weights recommended are part number 718215036, front ballast weights for compact
tractors (100 lbs. each). Recommend 6 ballast weights for 30-foot heads and 8 ballast weights for 36-foot
heads. (H8000 Series only)
3
X
X
X
87628996
Air suspension rear axle weight carrier bracket (400 lb./181 kg). Weight carrier only, does not include ballast
weights. Suitcase weights recommended are part number 718215036, front ballast weights for compact
tractors (100 lbs. each). Recommend 6 ballast weights for 30-foot heads and 8 ballast weights for 36-foot
heads. (H8000 Series only)
4
X
X
X
439106006
Transport Ballast Box- to attach to the front of the base unit in place of the head for safe road transport. (NOT
COMPATIBLE W/ ALL 4-CYL. NON-DRAPER UNITS AND 4-CYL. DRAPER UNITS PRIOR TO MY14 DUE
TO LIFT ARM WIDTH)
--
X
X
X
HEADER ADAPTER KITS
716965136 Sickle head adapter kit f/MY2003 and later HS sickle headers 2 X X X
47522054 Adapter kit to operate disc head on draper ready windrower. (SR Series only) X X
47599214 Adapter kit to allow prior model HB header operation. To convert HB Series Draper with reel synchronization
valve. Do not order if draper head does not have reel synchronization. (SR Series only) 2 X X X
47510965 Poppet-Style Couplers-disc header only. Provides couplers for header to allow attachment to a draper-ready
windrower. 0.5
X X
47510963 Poppet-Style Couplers-SPW- provides couplers for both disc header and SPW. (SR Series only) 1 X X X
CAB KITS
717213006 Front windshield wiper/washer 3 X
47422570 In-cab controlled adjustable windrow shield kit. (SR Series only) 3 X X X
717131016 In-cab controlled adjustable windrow shield kit. (MY13 and MY14 H8000 models) X X X
87041191 In-cab controlled adjustable windrow shield kit. (MY 12 and prior H8000 models) X X X
82004428 Front cab window sun screen kit - Included in Deluxe Cab factory option -- X X X
86627943 Rear cab window sun screen kit - Included in Deluxe Cab factory option -- X X X
87027853 Electric-adjustable mirrors (adjust from inside cab). 3 X X X
84533462 High performance LED lighting. Order one kit for windrower front lighting, and a second for rear lighting. 0.8 X X X
73328580 Beacon (requires beacon mounting kit) X X X
87027859 Beacon Mounting Kit X X X
84814470 Panoramic Mirror- external mount to electric-adjustable mirrors on either side of cab (not compatible w/manual-
adjust mirrors)
X X X
Page 1
57 o
f 160
Page 159
PARTS DIVISION SUPPLIED ACCESSORIES FOR PRIOR GENERATION WINDROWERS (8000 AND MY14 SPEEDROWER SERIES)
Part Number Description Installation
Hours
H8040 /
SR130
H8060 /
SR200
H8080 /
SR240
CAB KITS (Continued)
87026387
Auxiliary Cab Entry Step- provides additional step to mount below existing bottom step. Particularly useful
w/larger front tires. Also requires (2) flexible side support strips #87025844 and mounting hardware
0.3
X
X
X
84381500 Extra-Quiet Cab Kit- to reduce cab noise levels by 63% (standard on deluxe cab models) 4 X X X
HYDRAULIC KITS
47422568
Hydraulic Reel Drive Kit - windrower base unit content. Used with model HS sickle heads ONLY. (Also
requires the following two kits: engine mounted auxiliary hydraulic pump (either factory installed or DIA kit),
and 716961076 model HS head hydraulic reel drive kit). (SR Series only)
1.5
X
X
X
716961086
Hydraulic Reel Drive Kit - windrower base unit content. Used with model HS sickle heads ONLY. (Also
requires the following two kits: engine mounted auxiliary hydraulic pump (either factory installed or DIA kit),
and 716961076 model HS head hydraulic reel drive kit). (MY13 H8000 models only)
1.5
X
X
X
716961046
Hydraulic Reel Drive Kit - windrower base unit content. Used with model HS sickle heads ONLY. (Also
requires the following two kits: engine mounted auxiliary hydraulic pump (either factory installed or DIA kit),
and 716961076 model HS head hydraulic reel drive kit). (MY 12 and prior H8000 models)
1.5
X
X
X
47511248 4-cylinder engine mounted auxiliary hydraulic pump (gear pump) and control valve. For use with hydraulic
reel drive kit 4742568. (SR 130 only) 2.5 X
87629027 4-cylinder engine mounted auxiliary hydraulic pump (gear pump) and control valve. For use with hydraulic
reel drive kit 716961086 and 716961046. (H8040 only) 2.5 X
47505301 6-cylinder engine mounted auxiliary hydraulic pump (gear pump) and control valve. For use with hydraulic
reel drive kit 47422568. 2.5
X X
87629026 6-cylinder engine mounted auxiliary hydraulic pump (gear pump) and control valve. For use with hydraulic
reel drive kit 716961046. 2.5
X X
47504583 6-cylinder engine mounted auxiliary hydraulic pump for crop merger attachment. Will not work with hydraulic
reel drive on HS heads. (MY 14 Speedrower Series) 2.5
X X
87711016 6-cylinder engine mounted auxiliary hydraulic pump for crop merger attachment. Will not work with hydraulic
reel drive on HS heads. (H8000 models only) 2.5
X X
47518199 Lift arm power down kit - 4 cyl. draper units and all 6 cyl. draper units (SR Series only) 0.5 X X X
ENGINE KITS
87575054 Radiator chaff wiper blade kit- Installs in screen side of radiator to reduce chaff build up 2 X
87573917 Radiator chaff wiper blade kit- Installs in screen side of radiator to reduce chaff build up 2 X X
47586289 Cold starting aid (grid heater only; also requires dealer installed second battery) -- X
87629024 Cold starting aid (grid heater) -- X X
Page 1
58 o
f 160
Page 160
PARTS DIVISION SUPPLIED ACCESSORIES FOR PRIOR GENERATION WINDROWERS (8000 AND MY14 SPEEDROWER SERIES)
Part Number Description Installation
Hours
H8040 /
SR130
H8060 /
SR200
H8080 /
SR240
PRECISION FARMING
47737179
Guidance-ready kit. Includes steering sensor, wire harness, mount for nav controller/372 receiver, wire
connection for touch screen display. Nav Controller, Receiver and Monitor must be ordered separately. (SR
Series only)
12
X
X
X
84574275 GPS Receiver-Level 1. 372 GPS Receiver (WAAS/EGNOS/RangePoint RTX) Requires Auto Guidance
Ready or dealer installation of wiring. (SR Series only) 0.5 X X X
84574277 GPS Receiver-Level 2. 372 GPS Receiver (WAAS/EGNOS/RangePoint RTX/HP/XP/ CenterPoint RTX)
Requires Auto Guidance Ready or dealer installation of wiring. (SR Series only) 0.5 X X X
87518983 Navigation II Controller (SR Series only) 0.5 X X X
Contact Parts IntelliView 4 display- REQUIRED for guidance applications (order display and hardware from parts) 0.2 X X X
MISCELLANEOUS
87634089
Swath roller hitch receiver kit. Includes a weld-on hitch receiver (2 in. by 2 in. or 5.08cm by 5.08cm). Hitch
extension must be procured locally. Only for use in towing a swath roller in field operation having a maximum
roller weight of 1000 lbs. (453 kg) and maximum vertical load of 150 lbs. (68 kg).
0.5
X
X
X
84059809 Service light (magnetic base with 32 ft. cord and 12v plug) -- X X X
87560864 Head lift arm quick latch kit. Replaces the standard manually installed head attaching lift arm locking pins.
(non-draper only) 0.3 X
84598213 Head lift arm quick latch kit. Replaces the standard manually installed head attaching lift arm locking pins. ( 4-
cyl. draper ready and all 6-cyl. units) 0.3
X X
87536639 Draper head lateral position indicator kit. Provides visual height indicator at both lift arms to assist the
operator in maintaining a desired stubble height at each end of the head. 0.8 X X X
87473378 Adjustable hay windrowing shield kit. Provides adjustable windrow shield for installation on al factory draper
ready windrower equipped with fixed drive motor shields. 1 X X X
47974207 Anti-Shimmy Shock Retrofit Kit- also requires two larger anti-shimmy shocks- #47918454. (SR Series only)
X X X
Page 1
59 o
f 160
Page 161
PARTS DIVISION SUPPLIED ACCESSORIES FOR CURRENT MEGACUTTER™ DISC MOWER CONDITIONERS
Part Number Description MC512 MC530
47936789 Hydraulic Coupler Kit- to convert quick couplers to compatibility w/T8 tractors- MY16 and forward
726936006 21-Spline, 1000 RPM PTO yoke- to connect drive shaft to tractor equipped w/21-spline output shaft- MY15 & prior. Source
from wholegoods.
726936026 21-Spline, 1000 RPM PTO yoke- to connect drive shaft to tractor equipped w/21-spline output shaft- MY16 & forward. Source
from wholegoods.
726937006 20-Spline, 1 3/4", 1000 RPM PTO yoke- to connect drive shaft to tractor equipped w/1 3/4" output shaft- MY15 & prior.
Source from wholegoods.
726937026 20-Spline, 1 3/4", 1000 RPM PTO yoke- to connect drive shaft to tractor equipped w/1 3/4" output shaft- MY16 & forward.
Source from wholegoods.
727185006 Joystick Control-Isobus Compatible- MY16 & forward. Source from wholegoods.
727186006 Joystick Control-Non-Isobus Compatible- MY16 & forward. Source from wholegoods.
X
X
X
X
X
X X
SERVICE KITS
51401592 ISOMATCH Top Service Kit - Permits reprograming of Joystick Controls for ISOBUS and NON-ISOBUS applications.
Required when sourcing replacement Joystick Controller from Service Parts for MY2016 and later only.
X
Page 1
60 o
f 160