2013 Sparta Engineering Inc. Catalogue
2013
Sparta Engineering Inc. Catalogue
Truck Mounted Single Service Rig
Basic Information
Model TMS69-120
API 4f 3rd Edition Yes**
Period One legal Yes**
Rig Weights (Fully Dressed) Front: 16,800 kg. Rear: 24,000 kg**
Capacity 120 000 lb (53,376 daN)
Height 69 ft (21 m)
Minimum Design Temperature -20°C
Carrier
Axle Configuration Tandem Steer / Tridem Drive
Tires Steer: 445R22.5's Drives:12R22.5's
Chassis International Paystar 5900i (other trucks
optional)
Wheelbase 378 in (Front steer-to-Centre drive)
Steer axle spread 72 in
Transfer Case Fabco PTO-180-23
Mast
Model 69-120 stiff-single
Mast Height 69 ft (21 m)
API Capacity 120,000 lbs (53,376 daN) on 40lines
Free-standing Free-standing or Guyed (with free-stand
equipped)
Maximum rated design wind velocity 85 mph without setback. 70 mph with setback
Drill Line Size 7/8" or 1"
Racking Board Height 27 ft (8.23 m)
Rod Basket Height 54-3/4 ft (16.69 m)
Racking Board Capacity 18,700 daN (21 short tons)
Rod Basket Capacity 8,400 daN (9.45 short tons) - Max 1" rods
Crown Sheaves 3 of 24" steel sheaves and 1 of 22" steel sheave
Well spacing 5 ft (1.52 m)
Fall Arrest at Crown Yes
Fall Arrest Above Rod Board Yes
Central Grease Yes
Traveling Block 75-ton
Drawworks -- See Drawworks data sheet
Model FAST450 42x10 Band, FAST450DB (2x48in Disc),
FAST450LW
Drill Line Size 7/8" or 1"
Sandline Capacity of 9/16" 10000ft (3048 m) or 5000ft (1524 m) on
FAST450LW
Sandline Capacity of 1/2" Swaged 12000 ft (3657 m)
Features
Free-stand Turnbuckles Aluminum
Winches 2 on rig deck
Man Rider Winch Optional
Rod Accelerator Optional
Tong Swivel-Mount Optional
BOP-Slide (rear-mount) Optional
Accumulator Class 2 with Class 3 accommodations
** dependent on rig configuration and equipment
http://www.spartaengineering.com/ 2
Truck Mounted Double Service Rig
Basic Information
Capacity 200 000 lb
Height 105 ft
Quality Product Specification Requirements
Minimum Design Temperature -35°C
Carrier Type Tandem Steer/Tri Drive
Engine Type Cummins QSL 9
Transmission Allison 4700 OFS
Drop Box Namco
Substructure
Maximum rated static hook load 200 000 lb on 6 lines (890 KN)
Maximum rated static hook load 150 000 lb on 4 lines (667 KN)
Maximum rated design wind velocity
70 mph
Mast
Type Single
Telescoping Double, Telescoping Triple,
Cantilever Triple
Guying Free Stand, guying required (internally),
mast set-up distance 6 ft
Wire Rope Size
Sand line 1/2" Swaged
Drill line 1”
Supplier Shaw
Standard API 9A
Service Rig
Tubing Board Pipe Diameter 4.5"
Rod Basket Rod Diameter 1"
Crown
5 Sheaves 4 sheaves diameter 24"
1 sheave diameter 22"
Hydraulic Systems
Primary Rig Hydraulics
Secondary -
Drawworks
Model DW450
Supplier Sparta Engineering Inc.
Main Drum Braking 42" X 10" band
Sandline braking Kobelt air actuated
Main drum backup Kobelt
Winch (2 Sub frame)
Model Braden BG6B
Traveling Equipment
Block Size 100 ton
Weight 1 ton / 2200 lbs
Supplier Mckissick
Standard API 8A Note: This service rig has additional services
which include: Man Rider Winch, remote
monitoring, replacing components, training,
manuals, maintenance, etc. http://www.spartaengineering.com/
3
Catwalk
Basic Information
Capacity 25 000 lbs per arm, uniformly
distributed load
Working mode off
Length 44 ft.
Width 8 ft.
Height 3.94 ft.
Working mode on
Length 44 ft.
Width 48.59 ft.
Height 3.94 ft.
http://www.spartaengineering.com/ 4
Drawworks
Basic Information
Model FAST450 (BAND)/ FAST450DB (DISC)
Max Input HP Rating 450 HP / 336 Kw
Single Line Pull 41 500 lb / 18 400 daN
Max Hook with 4- lines 150 000 lb / 66 720 daN
Max Hook Load with 6 - lines 217 000 lb / 96 500 daN
Main Drum
Diameter X Width 18“ X 36”
Wire Line Size 1” or 7/8”
Drum Clutch PO324
Drive Chain Triple 100
Brake System Dual 48” Disc / 42” X 10” Band
Brake Cooling Air
Auxiliary Brake (optional) 40” (in) Disc
Sand line Drum
Diameter X Width 12.75“ X 36”
Drive System Polychain or triple 100
Brake System Single Disc 40”
Capacity 12 000 ft
Capacity 9/16” (in) Wire Rope 10 000 ft
Weight and dimensions
FAST450 (Band brakes w / Triple 100 Drive Sandline) 6758 kg / 14 900 lb
FAST450 DB (Disc brakes w/ Polychain Drive Sandline)
7048 kg / 15 540 lb
Length 127.75”
Width 105”
Height 60.75”
Standard Features
Main drum chain tensioner
Sandline Polychain Tensioner (Polychain Drive)
Cable grooving machined in main drum barrel
Dual-Output, 3:2 Reducing Right –Angle Gearbox
Central greasing
http://www.spartaengineering.com/ 5
Mud Tank
Basic Information
Fluid Capacity 8384 gallon (32 m3)
Length 22.58 ft
Width 8.83 ft
Height 8.58 ft
Material options
Frame Materials Requirements QT-100 high strength steel frame (100 kpsi)
Decking Type/material Fiber grating upper deck
Piping Requirements
Suction Line 4" gate valve on suction (Operating Pressure 100 psi)
Steam Line 2"
Inlet 2" (Operating Pressure 5000 psi)
Line Pipe 2" (Operating Pressure 6000 psi. Test certs to be
provided; Length required
Pipes 18 lengths X 20 ft
Pipes 2 lengths X 10 ft
Pipes 2 lengths X 6 ft
Pipes 2 lengths X 4 ft
Valve Type (gate or butterfly) Butterfly valves 4" for each chamber.
Equalizer valve between sections and 4” internal valves for each chamber.
Degasser Box style degasser
Inlet feed diameter 2”
Options
Remote monitoring Available
Handrails (height and style) Collapsible
Tank gage type Float gage
Lifting Requirements 4 ft. light top of gage board
Safety cables -
Pipe Racking Requirements: Racking for 240’ lengths
-
http://www.spartaengineering.com/ 6
Drilling Mud Tank
Basic Information
Fluid Capacity 17 926 gallons (81.5 m3)
Length 61.29 ft
Width 19.69 ft
Height 13.12 ft
Quality Product Specification Requirements
Frame Materials Requirements QT-100 high strength steel frame (100 kpsi)
Decking Type/material Fiber grating upper deck
Options
Remote monitoring Available
Handrails (height and style) Collapsible
Tank gage type Float gage
Lifting Requirements 4 ft. light top of gage board
Safety cables -
Pipe Racking Requirements: Racking for 240’ lengths
-
http://www.spartaengineering.com/
7
Pump Truck
Truck Specifications
Axles numbers Tandem drive single steer
Deck size
Length 166.75”
Width 102”
Live Roll 98.4”
Pump Specifications
Supplier SJ
Model Triplex Plunger Pump
Working pressure / flow 11 lb/min-max.
Charge pump
Supplier Bowie
Model 4300 EX charge pump
Handrails and stairs
Hand Rail Style Collapsible
Stair Details Folding stair for access to working deck
Winch
Supplier Tulsa
Model H34 winch
Drop Box
Supplier Chelsea
Model 859XGFJP-85XK
Piping requirements
Piping Pump Line
Diameter 2”
Operating Pressure 5000 psi
http://www.spartaengineering.com/ 8
Contact
You can reach us at the following three locations:
Canada
Matt Fox, P. Eng.
CEO, Sparta Engineering Inc.
Linden, Alberta:
702 – 1st Avenue NW Box 365
Linden AB, T0M1J0
Ph: 403.546.3851
FX: 403.546.2486
México
Ing. Gabriela Ulloa.
Manager Mexico, Sparta
Engineering Inc.
Toluca, México:
Carretera México-Toluca Km. 50
A un costado de la VW de Lerma
Lerma, México
Of: (52) 722 4 89 88 26
Cel.: (52 1) 722 342 05 66
Cel. Canada: 403 804 9420
Jason Thompson, P. Eng.
VP, Sparta Engineering Inc.
Grand Prairie, Alberta:
9301-102 Street
Clairmont, Alberta, T0H-0W0
Ph: 403.546.3851
FX: 403.546.2486
http://www.spartaengineering.com/ 16