Solutions For Energy Storage ATEPS is based around a number of core tech- nologies that all focus on the preservation and storage of energy. We have developed unique solutions for peak-shaving, energy storage and fuel saving for CHP’s that can be delivered quickly and starts saving your ener- gy cost energy cost almost instantly. In many cases these installations can be offered including financing and do not need any capital investments on your side. Therefore these solution are risk-free for any user; risk free both financially and technically since any changes to your exist- ing application can be undone in a matter of minutes should you desire to do so. Our service devision keeps an eye on all the units and service and optimization can often be done without user interference. HSB01-UK. Rev. 4 A T E P S ATEPS Nederland BV Advanced Technologies for Energy & Power Systems 19” Lithium battery ATEPS Netherlands BV has developed a 19” battery with a height of 2U, which can be used in many applications. Due to the universal design of the battery it can easily be integrated into existing installations such as: • Energy Storage System • Backup in ICT systems • Emergency power supply for telecommu- nication systems The batteries are interconnected via the back- plane so there are no voltage-carrying parts on the front of the battery, an important safety feature. For applications where the voltage should be available to the front, this can be achieved by means of a 1U high connection-unit. Depending on the backplanes used, the bat- teries can be connected in series or parallel or a combination of these whereby a maximum of 16 modules can be inserted in tot rack. Thereby systems with different voltages and capacities can be easily configured. A 19” BMU is available for integration in the same cabinet that controls all batteries in this rack. The BMU communicates to external devic- es via RS485 or the ATEPS Energy Management System that also controls the converters in ESS applications. An SD card can be inserted in the BMS to update firmware in the batteries and can be used to log battery data for later analyses of the battery parameters.