SOUTHERN CROSS SXVS VERTICAL SHAFT DRIVEN CENTRIFUGAL SLURRY PUMPS HEAVY DUTY, RELIABLE SLURRY PUMPING FROM SUMPS AND PITS FEATURES APPLICATIONS Transfer of Abraisive and High Density Slurries from Sumps and Pits in: Mining Industry Civil Construction Coal Preperation Mineral Processing Chemical Processing Sugar Industry OPERATING LIMITS Capacity 10-1000m 3 /hour Head up to 40 metres Discharge 40-250mm Max. Solid Size 50mm Motor Sizes 3-200kW Operating Speed 400-2200RPM Pumped Liquid Abraisive Slurries High Density Slurries Solids Laden Water SXVS-IF-0113 Cantilevered design eliminates shaft sealing requirements. Column and discharge pipe options available including composite materials. Cantilever shaft length up to 2400mm. Deep sump variant available for applications where cantiler design is not suitable. Quick and easy changeover of wet end. Drive end bearings have no contact with pumped product, allowing greater wear life. Wet end stub shaft options available for severe duty applications. Wide range of wet end construction material options available to suit any application and installation environment. Removeable upper strainer. Rubber lined cast iron lower strainer reduces blockages. OPTIONS Stub shaft options for severe duty applications. Cantilevered shaft or extension shaft with column bearings. Direct coupled or belt drive with set speed or variable frequency operation. Wet end, column and discharge pipe materials of construction.