Southeast #20, 2012

Highland Holds Customer

Appreciation Day…8

ACT Moves Into

Charlotte Market…16

RW Moore, Benchmark Host

Skeet Shooting Event…12

Inside

“The Nation’s Best Read Construction Newspaper… Founded 1957.”

® SoutheastEdition

$3.00

Published Nationally

October 3, 2012 • Vol. XXV • No.20 • 470 Maryland Drive • Ft. Washington, PA 19034 • 215-885-2900 • Toll Free 800-523-2200 • Fax 215-885-2910 • www.constructionequipmentguide.com

By Cindy RileyCEG CORRESPONDENT

Construction on a 431,000-sq.-ft. (40,041sq m) prison that can house more than 1,400inmates is close to completion in Pikeville,Tenn. The new Bledsoe County CorrectionalComplex on Horsehead Road, which accord-ing to the Tennessee Department ofCorrections (TDOC) will create hundreds ofnew jobs, includes rows of large gray hous-ing units made from stacked, precast cellsbuilt on the prison grounds. The project was first announced by the

TDOC back in 2004, based on populationprojections which indicated the need foradditional beds; however, work didn't actual-ly begin until May 2010. A groundbreakingfor the new facility was held in April 2010. The Bledsoe County addition consists of

five buildings containing 632 cells producedin a total of 156 quad-cell modules and fourdouble-cell modules. It is actually an expan-sion of the Southeastern Tennessee StateRegional Correctional Facility, which wasbuilt in 1980 and is a time-building institu-

Bledsoe County Builds Correctional Complex

The number of improving housing marketsacross the country rose to 99 in September,according to the National Association of HomeBuilders/First American Improving MarketsIndex (IMI), released Sept. 10. This is up from80 metros that were listed as improving inAugust and includes representatives from 33

states as well as the District of Columbia. The index identifies metropolitan areas that

have shown improvement from their respectivetroughs in housing permits, employment andhouse prices for at least six consecutive months.Markets added to the list in September includesuch geographically diverse locations as

Tucson, Ariz.; Jacksonville, Fla.; Springfield,Ill.; Greenville, N.C.; and Bend, Ore.“The number of improving housing markets

grew by 19 in September as 68 metros retainedtheir spots, 31 new metros were added and just12 dropped off the list,” noted Barry Rutenberg,

Improving Housing Markets List Grows to 99

see HOUSING page 80

Canada Firm Proposes New Pipeline RouteJosh FunkASSOCIATED PRESS

OMAHA, Nebraska (AP) Thecompany that wants to build apipeline to transport crude oil

from Canada to U.S. Gulf Coastrefineries said Sept. 5 it hasrevised its proposed new routethrough Nebraska to avoid envi-ronmentally sensitive areas. The latest proposed Keystone

XL pipeline route isTransCanada’s second attempt tosatisfy state environmental regu-lators. The Nebraska Departmentof Environmental Quality said inJuly that the initial revised route

crossed land that could erode eas-ily and passed near unconfinedaquifers that supply drinkingwater to residents and livestock. The new TransCanada propos-

see PIPELINE page 78

see COMPLEX page 34

Photo courtesy of Jason Gentry of Mid-State Construction Crews install the 16-in. (40.5 cm) diameter HDPE distribution piping underneath the road-way.

Table of Contents................4

Mini & Compact EquipmentSection..........................43-61

Paving Section ............63-75

Parts Section................76-77

Auction Section ..........82-93

Business Calendar ............89

Advertisers Index..............94

Page 2 • October 3, 2012 • www.constructionequipmentguide.com • CONSTRUCTION EQUIPMENT GUIDE

Contact your sales representative to seehow we can make a difference for you.

Main Office:1023 S. 50th Street • Tampa, FL

866-586-8956

Fort LauderdaleDavie)

954-327-8808

Fort Myers293-334-6063

Orlando407-859-9160

Jacksonville904-268-4400

Savannah, GA912-966-5666

The Takeuchi product line is only available in the Tampa and Orlando locations.

CONSTRUCTION EQUIPMENT GUIDE • www.constructionequipmentguide.com • October 3, 2012 • Page 3

Volvo Construction Equipment

USED EQUIPMENT

Compactors - Padfoot2006 INGERSOLL RAND SD122F......$97,000

Compactors - Smooth Drum2008 VOLVO DD138HF, 1428 Hrs....$128,0002008 VOLVO DD90HF, 730 Hrs ......$120,000

Excavators - Crawler2006 VOLVO EC140B LC, 2422 Hrs ..$84,0002005 VOLVO EC160B LC, 2705 Hrs $102,0002008 VOLVO EC160CL, 1607 Hrs ....$138,0002007 VOLVO EC240CL, 2192 Hrs ....$150,0002007 VOLVO EC330B LC, 4522 Hrs $160,0002008 VOLVO EC330CL, 4653 Hrs ....$186,0002008 VOLVO EC460CL, 5244 Hrs ....$240,000

Excavators - Mini (up to 12,000 lbs)2008 VOLVO EC55B, 1682 Hrs ........$56,400

Excavators - Wheel2010 VOLVO EW180C, 2034 Hrs ....$180,000(2) 2011 VOLVO EW180C, 1262-1892 Hrs ..........................................$204,000 Ea.

Motor Graders2008 VOLVO G940, 1945 Hrs ........$175,0002009 VOLVO G930, 1030 Hrs ........$210,000

Off-Highway Trucks2005 VOLVO A25D, 4977 Hrs ........$190,0002006 VOLVO A25D, 6682 Hrs ........$185,000(3) 2011 VOLVO A25F, 1130-1243 Hrs ..............................................$348,000 Ea.

2008 VOLVO A30E, 3771 Hrs ........$312,000(2) 2011 VOLVO A30E, 1702-2013 Hrs ......................................$384,000-$396,000

(7) 2011 VOLVO A30F, 1387-1906 Hrs ......................................$402,000-$414,000

(3) 2011 VOLVO A35F, 1641-1795 Hrs ..............................................$492,000 Ea.

2007 VOLVO A40D, 6625 Hrs ........$288,000(5) 2008 VOLVO A40E, 4816-6521 Hrs ......................................$315,000-$360,000

(2) 2010 VOLVO A40E, 2154-2732 Hrs ......................................$460,000-$510,000

(11) 2011 VOLVO A40E, 1922-2519 Hrs ....................................$492,000-$510,000

2007 VOLVO A40E FS, 5019 Hrs ....$414,000(10) 2011 VOLVO A40F, 1163-2817 Hrs......................................$540,000-$588,000

(4) 2007 VOLVO T450D, 1366-2044 Hrs ............................................$300,000 Ea.

Skid Steers2006 VOLVO MC110B, 313 Hrs........$34,000

Water Equipment - Truck2006 VOLVO A30D, 5573 Hrs ........$190,000

Wheel Loaders(2) 2011 VOLVO L20F, 7-111 Hrs $58,800 Ea.(2) 2011 VOLVO L60F, 889-1258 Hrs ................................................$150,000 Ea.

2005 VOLVO L70E, 2623 Hrs ........$107,5002006 VOLVO L70E, 4225 Hrs ........$108,0002009 VOLVO L70F, 6474 Hrs ........$126,0002011 VOLVO L70F, 886 Hrs ..........$168,0002008 VOLVO L150F, 3173 Hrs........$252,000(2) 2009 VOLVO L150F, 3121-4068 Hrs......................................$260,000-$264,000

2011 VOLVO L150G, 1632 Hrs ......$342,0002011 VOLVO L35ZD, 407 Hrs ..........$78,000

North Carolina: CharlotteRaleigh

AshevilleGreenville

South Carolina: Columbia

North CharlestonPiedmont

Georgia: Buford

Forest ParkSavannah

Tennessee: Knoxville

Chattanooga

Your VOLVO dealer inThe Carolinas • Georgia • East Tennessee

www.ascvolvo.comVOLVO EC330BLC, 4522 Hrs, $160,000

(7) 2011 Volvo A30F 1259 - 1627 hrs,$402,000 - $414,000

2011 Volvo L35ZD, 292 hrs, $78,000

(4) 2007 Volvo T450D from 1354 hrs,$300,000

(3) 2010/11 Volvo EW180C, 1052-1930hrs, $180,000 – 204,000

(2) 2011 Volvo L60F, 630-997 hrs,$150,000

2011 Volvo L150G 1614 hrs, $342,000

(3) 2011 Volvo A35F, 1442 - 1695 hrs,$492,000

2008 – 2011 (15) Volvo A40E from 1810hrs, from $315,000

2007 Volvo A25D, 5400 hrs, New 5000gallon tank $230,000

(5) 2008 – 2010 Volvo L150F from 2336hrs, from $222,000

2010 VOLVO L90F, 3700 Hrs, NewRubber $150,000

Doug Wilson 704-562-2032 Email: [email protected]

Billy Brice 678-318-9500Email: [email protected]

Elon Holley 334-450-7667Email: [email protected]

ASC has the largest supply of Tier 3 Articulated Trucks in inventory, call for more details.


SOUTHEAST EDITIONCirculated Throughout • Alabama • Arkansas • Florida • Georgia • Louisiana

• Mississippi • North Carolina • South Carolina • Tennessee • Virginia • Puerto Rico • Virgin Islands

Founder, Publisher & CEO Edwin M. McKeon Sr.Southeast Publisher Richard C. McKeon

Editor In Chief Craig Mongeau Associate Editor Christine Reckner

Editorial Consultant Pete Sigmund Production Mgr. John Pinkerton

Controller Tom WeinmannCirculation Mgr. Rolf Krog

Asst. Circulation Mgr. Cathy Printz

Main office 470 Maryland Drive Fort Washington, PA 19034

215/885-2900Toll Free 800/523-2200

Fax 215/885-2910

Web site www.constructionequipmentguide.comEditorial e-mail [email protected]

Advertising e-mail [email protected]

For advertising rates Contact Richard C. McKeon• North & South Carolina • Tennessee •Virginia

704/553-8888Toll Free 800/288-4234

Fax 704/553-8899e-mail [email protected]

Contact Rich Olivier• Alabama • Arkansas • Georgia •Mississippi • Tennessee • Florida Panhandle

770/443-3174Toll Free 800/409-1479


Contact Jim Van Natta• Florida • Virgin Islands • Puerto Rico

407/365-5720Toll Free 800/344-3026


Contact Dale Agnew•Louisiana

Toll Free 877/877-4997 Fax 972/719-2611

e-mail [email protected]

Construction Equipment Guide Southeast Edition (ISSN 1058-6474) is published bi-weekly by Construction EquipmentGuide Ltd. Advertising and Editorial Offices are located at 470 Maryland Dr., Ft. Washington, PA 19034. Toll Free800/523-2200 or Fax 215/885-2910. Annual Subscription Rate $65.00. Call for Canadian and foreign rates.

Periodicals postage paid at Ft. Washington, PA and at additional mailing offices. POSTMASTER: Send addresschanges to Construction Equipment Guide Southeast Edition, 470 Maryland Dr, Ft. Washington, PA 19034.

Contents Copyrighted ©2012, by Construction Equipment Guide, which is a Registered Trademark, registered in theU.S. Patent Office. Registration number 0957323. All rights reserved, nothing may be reprinted or reproduced(including framing) in whole or part without written permission from the publisher. All editorial material, photo-graphs, drawings, letters, and other material will be treated as unconditionally assigned for publication and copyrightpurposes and are subject to Construction Equipment Guide's unrestricted right to edit and comment editorially.Contributor articles do not necessarily reflect the policy or opinions of this publication.

Call or write for advertising rates, publication schedule and media kit. The Construction Equipment Guide is notresponsible for clerical or printer's errors, every care is taken to avoid mistakes. Photographs of equipment used inadvertisements are not necessarily actual photographs of the specific machine. Similar photographs are used occa-sionally and every effort is taken to depict the actual equipment advertised. The right is reserved to reject any adver-tising.

IN THIS ISSUESPECIAL SECTION…MINI & COMPACT EQUIPMENTBe sure to check out this special section! Keep up to date with the latest information on mini and compact equipment.

FEATURES…HIGHLAND TRACTOR CO. HOSTS CUSTOMERAPPRECIATION DAYHighland Tractor had GradeWorks LLC, a construction GPS and site worksurveying company, come in and lay out a road, building pad and pond at the back of the property.

RW MOORE, BENCHMARK HOST ANNUAL SKEETSHOOT EVENTThe well-attended Sept. 14. event drew 200 contractors from easternNorth Carolina.

ATLANTIC COAST TOYOTALIFT MOVES INTOCHARLOTTE MARKETWith six employees in the new Charlotte store, ACT’s staff handles everything from sales to aftermarket support.

WRIGHT EXPRESS RELEASES MONTHLYCONSTRUCTION FCI RESULTSThe Wright Express Construction Fuel Consumption Index indicated anincrease of 1.4 percent in July versus its level the previous year.

SANY BUILDS WORLD’S LARGEST, MOST ADVANCEDEXCAVATOR FACTORY IN CHINAThe Lingang Industrial Park has 10.7 million sq. ft. of total space, with 5.9 million sq. ft. of manufacturing space.

U.S. CONSTRUCTION SPENDING FELL 0.9 PERCENT IN JULYSpending on construction of single-family homes and apartments increasedagain, a hopeful sign for the modest housing recovery.

‘LADY CRANE, ’ COLLEAGUES CLOSE ONE DOOR,OPEN ANOTHERThe National Wind Technician Organization is able to provide safety training services for all personnel involved in the process of building, maintaining, operating, and managing wind turbines and wind sites.

20

28

28

32

16

12

8

43

80 CLASSIFIEDS82 COMING AUCTIONS89 BUSINESS CALENDAR

EQUIPMENT…76 DOOSAN DX140W Wheeled Excavator77 DOOSAN PORTABLE POWER Mobile Generators

12

43

16

8

28

®


QUALITY USED EQUIPMENT AT COMPETITIVE PRICES!Call Jill Penderghest, Asst. Used Equipment Manager O: 904.494.1436 | C: 904.803.2909

Browse our complete used inventory at used.ringpower.com

$69,500, LGP Blade.................................CanopySN# YYY00173 — 2000 Hrs., 2008 D5KLGP:

, LGP Blade..................................CanopySN# RKG03563 — 2,500 Hrs.,2007 D5GLGP:

$69,500SN# YYY00173 — 2000 Hrs.,

CAB, A/C, GP Bkt................................SN# CXK00608 — 3,500 Hrs.,2010 928HZ:

$62,000, LGP Blade..................................SN# RKG03563 — 2,500 Hrs.,

, GP Bkt...................................Canopy2007 247B2:

$120,000 CAB, A/C, GP Bkt................................SN# CXK00608 — 3,500 Hrs.,

,XL Blade, Hours are correct....Canopy2005 D3GXL:

$23,500, GP Bkt...................................SN# MTL05114 — 1,850 Hrs.,

$40,000,XL Blade, Hours are correct....SN# JMH01586 — 600 Hrs.,2005 D3GXL:

$60,000racks..A/C, 30” GP Bkt, Thumb, Rubber TSN# BCM02099 – 2,300 Hrs.,2008 307C:

, LGP Blade.................................CanopySN# LLL00480 — 2,000 Hrs.,2008 D3KLGP:

$60,000CABSN# BCM02099 – 2,300 Hrs.,

, A/C..........................., 200HP P, A/C...........................FreightlinerSN# 4DM42354 – 34,000 Mi.,2004 Dump Truck:

$53,000, LGP Blade.................................SN# LLL00480 — 2,000 Hrs.,

OROPS, 48” Forks...................................2007 1044C-54:

$40,000, A/C...........................SN# 4DM42354 – 34,000 Mi.,

, Std Stk, Rubber TCanopy2007 305CCR:

$75,000OROPS, 48” Forks...................................SN# 104433223 – 2,000 Hrs.,2007 1044C-54:

$37,000racks............., Std Stk, Rubber TSN# HWJ01921 — 800 Hrs.,2007 305CCR:

$52,500Boom Lift, Diesel.....................................SN# S60-17998 – 2,500 Hrs.,2008 GENIE S60:

Canopy ,LGP Blade................................SN# LLL00614 — 1,200 Hrs.,2010 D3KLGP:

$52,500SN# S60-17998 – 2,500 Hrs.,

Bkt......................GP A/C, 2-Speed, CAB, SN# JA2010 246C CL2:

$62,000Canopy ,LGP Blade................................SN# LLL00614 — 1,200 Hrs.,

, GP Bkt., LFCanopy2009 289C L2:

$29,000Bkt......................Y04428 – 1,100 Hrs.,SN# JA

Boom Lift, Diesel..................................2010 GENIE S125:

$39,500, 2-Spd...................... LF F, 2-Spd......................SN# JMP00650 — 1,850 Hrs.,

$157,500Boom Lift, Diesel..................................SN# S125-2862 – 1,100 Hrs.,2010 GENIE S125:

B

$25,000Cab, A/C, GP Bkt.....................................SN# BXM02941 – 1,300 Hrs.,2006 242B CL1:

l

ires.......................Smooth Drum, 6PR TSN# DAR00426 — 276 Hrs.,2007 CS323C:

$25,000SN# BXM02941 – 1,300 Hrs.,

d i

railer Mounted............................, TowerLight T2011 GENIE TML4000:

$55,000ires.......................SN# DAR00426 — 276 Hrs.,

OROPS, 48” Forks...................................2008 TL1055:

$6,000railer Mounted............................SN# TML11202 - 850 Hrs.,

d i

on Boom, Rear Mount....................20-TTon Boom, Rear Mount....................2007 National 690:

$77,500OROPS, 48” Forks...................................SN# TBM00974 — 2,750 Hrs.,

$130,000on Boom, Rear Mount....................

SN# 293402 – 29,000 Mi.,2007 National 690:


3144 Hwy 74 EastMonroe, NC 28112

www.brookssales.com

HoursMon.-Fri. 7:30am-5:00pmSat. 8am-12pm

BROOKS SALES FOR CASE SERVICE & SALES

Call Jimmy for Service & Brian for Parts.

704-233-4242 800-443-7569

The Best Parts & Technicians for your Case Skid Steer Loaders & CTL Track Machinesare at Brooks Sales. They are waiting for you.

Mon.-Fri. 7:30am-5:30pmSat. 8am-12pm

Call Jimmy for Service

& Brian for Parts.

704-233-4242800-443-7569

7

4:28 PM

7

4:28 PM

The Best Parts & Technicians for your

Case Skid Steer Loaders & CTL Track Machines are

at Brooks Sales. They are waiting for you.

YOUR COMPLETE RENTAL RESOURCE

ORLANDO

TAMPA

JACKSONVILLE2750 Imeson Road

Jacksonville, FL 32220

PRO

FESSIO

LNAL

Your Complete Rental Resource!S O

OSHOR SHOR PRO

Your Complete Rental Resource!G & SUSS O

RING & SURING & SUFESSION

L PPLY PPLY

NAL source!

steel trench shield

11128 Boggy Creek RdORLANDO

slide rail system

gas monitors

Other Supplies:

O YYOUR COMPLET

Jacksonville, FL 322202750 Imeson Road

JACKSONVILLE

Tampa, FL 336377532 Malta Lane

TAMPA

407-854-9949Orlando, FL 32824

11128 Boggy Creek Rd

CEESOURAL RENTE R RENTOUR COMPLET TE R

fall protectionblowers/hosesguideframequicksheet™ build-a-box™manhole shieldsOther Supplies:

Equipment Distributorq p

CE

SPECIALS

Fredericksburg, VAAshland, VA

Suffolk, VAManassas, VA

CONTACTRick Marsh • (540) 220-4333

2007 CASE SV208PD, STK# CE4364, 66” PAD FOOTROLLER, 399 HRS ..........................................$49,0002006 CASE 850K, STK# CE4152, CAB, A/C, 24”SHOES,120”BLADE, 1817 HRS ..................................$59,5002006 CASE CX210, STK# CE4177, A/C, THUMB,PLUMBING, 42”BKT., 3145 HRS ....................$78,0002000 DEERE 555G LOADER, STK# RM8060, 4 IN 1 BKT,GOOD GROUND WORK ..................................$21,5002006 CASE 580M, STK# CE4271, 2WD, TURBO,OROPS, STD. HOE, 24” BKT, 695 HRS ..........$39,0002007 CASE 580M, STK# CE4360, 2WD, OROPS, KENTHAMMER, 445 HRS ........................................$63,0002006 TAKEUCHI TL150, STK# KA0648, OROPS, 80”TOOTH BKT, NEW TRACKS, 1975 HRS ..........$27,5002005 HAMM 3307, STK# CU3587, 66” SMOOTHDRUM, 797 HRS ............................................$37,5001992 CASE 850E, STK# CU3577, 20” SHOES, GOODGROUND WORK, 3093 HRS ..........................$19,5001999 CASE 550G, STK# RM8070, 16” SHOES, GOODGROUND WORK, 2275 HRS ..........................$22,5002010 TAKEUCHI TB235, STK# KA0834, WARRANTY,THUMB, 18” QC BKT, 219 HRS ......................$36,0002002 CASE 580M, STK# CU3584, 4WD, CAB, A/C, E-STICK, 24” BKT, 2289 HRS ............................$39,0002007 TAKEUCHI TL130, STK# CU3545, CAB, HEAT,A/C, 67” SMOOTH BKT, 745 HRS ..................$26,5002003 TAKEUCHI TL150, STK# CU3564, CAB, HEAT,A/C, 80” TOOTH BKT, 2870 HRS ....................$27,5002008 TAKEUCHI TL140, STK# KA0791, WARRANTY,OROPS, 76” TOOTH BKT, 589 HRS ................$34,500

2006 TAKEUCHI TL150STK# CU3586, CAB, HEAT,

A/C, 80” TOOTH BKT, 1040 HRS $32,000

2008 KUBOTA U645STK# CU3583, ANGLE

BLADE, 36” BKT, 496 HRS$34,500

from

Since 1970

Copy Writer

A

Archie Bell

G None

N Lauren Pulwer

5 None

N Leandro Hernandez

F Condensed Black

N

CMYK 534 ppi, 4

questions regarding this material please call P

A message from the NBA and its playersA message from the NBA and its players



Highland Tractor Co. Hosts Customer Appreciation Day

This JD 644K got a workout from a potential buyer.

Discussing the attributes of the JD672GP grade control system.

The John Deere 650K with grade control isstarting to carve out the lake.

The John Deere and Hitachi excavator display drew a crowd.

Taking the equipment out on thework site.

Chuck Counts, president of GradeWorks LLC, explainsthe grade control system to the operator of the JohnDeere 672GP.

Highland Tractor Co. hosted a customer appreciationday on Sept. 13 at its main office in Ocala, Fla. Theevent gave visitors the opportunity to view and try out

various pieces of equipment including a grader and a dozerequipped with a Topcon 3D MC2 blade control system.

Highland Tractor had GradeWorks LLC, a constructionGPS and site work surveying company, come in and lay outa road, building pad and pond at the back of the property.Contractors were able use the John Deere 650K dozer and672GP motorgrader equipped with the 3d MC2 blade controlsystem to cut the road and building pad to grade.

In addition to the full John Deere construction and forestryline, Highland Tractor also represents Hitachi excavators andBomag compaction equipment. The home office is in Ocalaand there is a branch in Chiefland, Fla. For more information,call 888/711-0142 or visit www.highlandtractor.com.



WANTED: LATE MODEL USED CRANES! All Brands Considered.

Ring Power Crane offers premier machines from America’s leading crane manufacturers, including Manitowoc, Grove, National Crane, Broderson, Manitex and Badger Equipment Company, and serves from the southeastern United States to the Caribbean and Latin America.

FLORIDASt. Augustine904.737.7730

NEW & USED SALES RENTALS PARTS SERVICE RingPowerCrane.com

Pompano Beach Tampa/Orlando Miami (International Sales)

GEORGIAUnion City770.774.7300

NORTH CAROLINAConcord704.795.3636

SOUTH CAROLINALadson

WE PERFORM ANNUAL CRANE INSPECTIONS!

We are the NEWNational Boom Truck Dealer in Georgia!

NEWUNITS

UNION CITY, GAIN STOCK

Na Nat at tio io n na l B

We We a are re t th h B Bo oo m T Tr ruc uc ck

NEW

e e NEW k De De ea ale le r i in G

SEW

S

Ge Ge eo or rg gia ia !

IN STUNION CITY

UNITS

OCKIN ST, GAUNION CITY

UNITS

RFORM ANWE PEW & USEEN

UAL CRANNRFORM AN REND SALES

INSPEEUAL CRANARTS P PARTS S ALTTAL REN

S!CTION INSPERVICE SEARTS

RingPowerCrane

.comRingPowerCrane



RW Moore, Benchmark Host Annual Skeet Shoot Event

Troy Mitchell, Waste Industries, Apex, N.C., blasted the clay out of the sky with his Remington over andunder 12 gauge.

Jason Barber, Carolina Excavator Services, Raleigh, N.C., sawthe direct benefits of increased production when a machine isequipped with a Topcon device.

Demonstrating the Topcon RL-H4C rotating laser areTracy Skipper (L) and Mike Gaillard, both ofBenchmark Tool & Supply.

(L-R): Tony Jackson, RW Moore EquipmentCompany; Matthew Paul, CieszkoConstruction, Havelock, N.C.; and Dan Moorechat about the annual event.

John Caraway (L), Caraway Logging, New Bern, N.C.,and Dan Moore talk a little business between events.

When asked how the shooting went Walter Hudson (L) and JohnPatrick, both of Sullivan Eastern Inc., Durham, N.C., both saidthey were having an enjoyable day that sure beat sitting in theoffice.

RW Moore Equipment Company and Benchmark Tool & Supplyheld a joint skeet shooting customer appreciation event atDrakes Landing, the premier hunting preserve in Fuquay Varina,

N.C. The well-attended Sept. 14. event drew 200 contractors from east-ern North Carolina.Drakes Landing has many shooting points offering various situations

that mimic an actual hunting experience as well as real hunts such asquail and western style pheasant.RW Moore and Benchmark had a number of John Deere machines

on hand for customers to try out. Several of them were equipped withlaser and GPS systems to help the user move the dirt precisely.

see SKEET page 62


Se Habla Espa~nol

M.D. MOODY&SONSINC.M.D. MOODY&SONSINC.

SINCE 1913www.mdmoody.com

JACKSONVILLE, FL 32207904-737-4401 • Fax: 904-636-0532

PARTSPARTS

New Website

Coming Soon!


Ph. 770-949-9231 • Fax: 770-947-9916

Visit www.sealsaver.com for more information or contact us at 1-800-683-5189

Exclusively manufactured by:

Fluid ControlServices, Inc.1155 Allgood Road • Suite 15

Marietta, GA 30062

1-800-683-5189Fax: 770-509-5832

The SEAL SAVER*WILL:

• Eliminate rod scoring

• Extend the life of cylinder seals

• Protect cylinders from the elements

• Prevent pitting due tochemical washes

• Reduce particle contamination of

hydraulic systems

• Minimize dings and dents associated with

falling debris*Patented

Made inthe USA

SEAL SAVERhas proven effective in

Recycling, Construction,Mining, Rock Quarries, Waste

Management, Refineries, WoodProducts Processing, Steel

Mills and Hot Slag Industries.

STATEMENT OF OWNERSHIP, MANAGEMENT AND CIRCULATION

Required by 19 USC 3685

Title of publication: CONSTRUCTION EQUIPMENTGUIDE SOUTHEAST EDITION; Publication Number:1058-6474; Date of filing: Sept. 25, 2012; Frequency:Bi-weekly, 26 issues annually; Annual Subscriptionprice: $65.00; Complete mailing address of knownoffice of publication: 470 Maryland Dr., Ft. Washington,PA 19034; Publisher’s general business office: 470Maryland Dr., Ft. Washington, PA 19034; Publisher’sname and address: Richard McKeon, 6060 PiedmontRow Dr. South Ste 555, Charlotte, N.C. 28210; Editor inChief: Craig Mongeau, 470 Maryland Dr., Ft.Washington, PA 19034; Owner: CONSTRUCTIONEQUIPMENT GUIDE SOUTHEAST EDITION, 6060Piedmont Row Dr. South Ste 555, Charlotte, N.C. 28210;Edwin M. McKeon Jr., 470 Maryland Dr., Ft. Washington,PA 19034; Joseph McKeon, 5875 N. Lincoln Ave. Suite227, Chicago, IL 60659; Richard McKeon, 6060 PiedmontRow Dr. South Ste 555, Charlotte, N.C. 28210; Knownbondholders, mortgages, and other security holders:None, Issue date for circulation data below 9/19/12;Extent of circulation (Average number of copies dur-ing preceding 12 months): Net press run 20,308; paidcirculation through agents 0; through mail subscription20,044; free distribution 0; total distribution 20,044;copies not distributed 264; return from news agents 0;Total 20,308; Percent Paid and/or Requested Circulation100%; Actual number of copies for issue publishednearest to filing date: Net press run 22,380; paid circu-lation through agents 0; through mail subscription 22,105;free distribution 0; total distribution 22,105; copies not dis-tributed 275; return from news agents 0; Total 22,380;Percent Paid and/or Requested Circulation 100%.

I certify that the above statements made by me are cor-rect and complete.

/s/ Edwin M. McKeon, Jr., President/CEO



Atlantic Coast Toyotalift Moves Into Charlotte MarketBy Cindy Riley CEG CORRESPONDENT

Since opening its new location inCharlotte, N.C., in June 2012, Atlantic CoastToyotalift’s mission has been clear.

“We want to be a premier dealer of quali-ty compact equipment and accessories,”explained Patrick Cudicio, regional opera-tions manager of ACT ConstructionEquipment. “Charlotte remains one of themost robust markets in North Carolina. As aresult, it provides our dealership with theperfect opportunity to expand and grow byoffering our line of quality products andservices. Takeuchi, our line of compact trackloaders and excavators, has a proven recordof manufacturing top-notch equipment. Wehave been very successful with Takeuchi andare excited to enter the Charlotte region withthem.”

With six employees in the new Charlottestore, ACT’s staff handles everything fromsales to aftermarket support. The full-serv-ice dealership provides sales, service, partsand rentals. Besides Takeuchi, it carries aprofessional line of Stihl products, aerialwork platforms by JLG and Absolute EZ-Upand Chicago Pneumatic construction equip-ment and tools. For excavator and loadermachines the business also offers a variety ofbuckets and attachments manufactured byCID, Loflin and Fecon.

“Our customers are entrepreneurs — bigand small,” said Cudicio, who overseesoperations in eastern North Carolina, as wellas in the Charlotte area. “We see everyonefrom plumbers, landscapers, mulch andstone suppliers, builders of retention wallsand pools to residential, commercial or civilcontractors and anyone else who needs todig or move dirt. However, we tend to work

closely with that niche of the market thatfeels underserved by the larger, big namedealerships. Building a relationship with theowner/operator of a company who dependson others for their success can be reallyrewarding.”

According to Cudicio, customer serviceand quality merchandise are crucial to suc-cess at the company.

“Products that are reliable year after yearkeep customers profitable. However, cus-

tomer service keeps them coming back. It’smore than just having something availablewhen they need it or fixing it the first time,every time. It has more to do with buildinglasting relationships and maintaining effec-tive honest communication. It’s the execu-tion of customer service that makes up ourculture at ACT.

“Our short-term goals are encapsulated bythe single premise — to build relationships.We want to go out and make face-to-facecontacts and begin inroads towards a busi-ness cycle that revolves around sales, serv-ice, parts and rentals. Our goal is to get ourmessage out regarding who and what we areabout, and the advantages ACT brings to themarketplace. Our long-term goal is simplein that we don’t measure our success againstany other industry or competitor, nor do wegauge our success purely on a balance sheet.We are successful when we are recognizedfor what we are, which is a high-qualitycompany that offers value-added productsand services.”

Seeing things from the customers’ pointof view is one thing that the team at ACTtakes a lot of pride in.

“Each and every person at ACT is pas-sionate about one thing, and that’s helpingmake someone’s situation better. At ACT weunderstand that the customer calling is nothappy that they need a part, or that they needa service technician to fix their machine sit-ting in a half dug out foundation. They havea problem that needs to be resolved, and usu-

ally sooner than later. A panicked foremanlooking at missing a deadline becomes aloyal repeat customer when you get him outof that jam. The passion for our work stemsfrom remedying an issue and gettingmachines and people back to work.”

Another aspect of customer relationshipsemphasized at ACT is not just being a busi-ness in any given place, but being a businessthat understands the community and itsneeds as well.

“We are an established company with along history of providing experience basedsolutions,” added Cudicio. “Though we maybe new to the Charlotte region, we have beenin business for more than 40 years and havebeen, and remain, affiliated with many of thetop brand names in the industry.Furthermore, we have a proven track recordand are not going anywhere. Our aim is tobe a member of the community for a longtime. We understand how hard business istoday, and more so how hard the past fewyears have been. We strive hard to providesound, fast solutions when a machine isdown or when more equipment is needed tocomplete a job. We are ready to implementcreative solutions to challenges while main-taining the highest level of teamwork andintegrity.”

(This story also can be found onConstruction Equipment Guide’s Web siteat www.constructionequipmentguide.com.)CEG

(L-R) are Jay Williford, president, Robert Wallace, Patrick Cudicio, Mike Hilliard and Avery Hill.

The company has a number of new Takeuchi excavators and track loaders on theCharlotte yard ready to go for its customers.


TORO / DINGO TDAUGER, Serial # 280000478, ID # AU285, AugerToro Dingo, HIGH TORQUE POWER HEAD..................................$920

2008 SULLAIR 185CFM, Serial # 200803190066, ID # X080010,1495 Hours, Air Compressor, CAT diesel engine ....................$7,800

TORO / DINGO TDAUBIT12, Serial # 12AUBIT290, ID # AU290,12” Auger Bit Toro ..........................................................................$115TORO / DINGO TDAUBIT18, Serial # 18AUBIT291, ID # AU291,18” Auger Bit Toro ..........................................................................$115TORO / DINGO TDAUBIT6, Serial # 250000176, ID # AU287, 6”Auger Bit Toro..................................................................................$115TORO / DINGO TDAUBIT9, Serial # 260000170, ID # AU288, 9”Auger Bit Toro Dingo ......................................................................$115

TORO / DINGO TDAUEX12, Serial # 12AUEX293, ID # AU293, 24”Auger Extension Toro ........................................................................$58

2010 CATERPILLAR 420E IT, Serial # 0DAN00450, ID # 100378,940 Hours, Backhoe, 4x4, Erops, A/C ....................................$71,9002010 CATERPILLAR 420E IT, Serial # 0DAN00158, ID # 100790,2072 Hours, Backhoe, 4x4, Erops, A/C ..................................$67,0002010 CATERPILLAR 420E IT, Serial # 0PHC00893, ID # 090259A,205 Hours, Backhoe, 4X4, Erops, A/C, Aux. hyd. Auto shift, tire @205hrs 95-99% ........................................................................$80,0002011 CATERPILLAR 420E ST, Serial # 0DJL00730, ID # 100381,544 Hours, Backhoe, 4x4, Erops, A/C ....................................$78,9002010 CATERPILLAR 420E ST, Serial # 0DJL00669, ID # 100690,522 Hours, Backhoe, 4x4, Erops, A/C ....................................$68,9002010 CATERPILLAR 420E ST, Serial # 0DJL00401, ID # 100846,780 Hours, Backhoe, 4x4, Erops, A/C ....................................$67,800

CATERPILLAR 771BED, Serial # U771DBEDMS1449, ID #MS1449, 771 Bed ......................................................................$8,689CATERPILLAR 773BED, Serial # U773BEDMS1826, ID # MS1826,773 Bed........................................................................................$9,711

CATERPILLAR 690BLADE, Serial # U690BLADEBL215, ID #BL215, 690 Blade group - Part #BD690U22 ............................$7,156CATERPILLAR D10BLADE, Serial # UD10NBLADEBL217, ID #BL217, D10N SU BLADE, PART #9W2246 ..............................$5,622CATERPILLAR D4BLADE, Serial # D4BLADEBL51, ID # BL51, D4GXL Blade ..........................................................................................$920CATERPILLAR D6BLADE, Serial # 0S1D00045, ID # BL241, D6KFoldable Blade ............................................................................$1,150CATERPILLAR D6NBLADE, Serial # UD6NBLADEBL288, ID #BL288, D6N BLADE....................................................................$1,022CATERPILLAR D7BLADE, Serial # UD7BLADEBL287, ID # BL287,D7R BLADE, SU..............................................................................$511CATERPILLAR D8BLADE, Serial # UD8BLADEBL519, ID # BL519,CAT D8 U BLADE, MOLDBOARD ONLY, SINGLE TILT, SPILL GAURD....................................................................................................$11,244CATERPILLAR D9RBLADE, Serial # UD9RBLADEBL251, ID #BL251, D9R U BLADE..............................................................$11,2441900 CATERPILLAR MISC ITEMS, Serial # U563BLADEBL10, ID# BL10, CS563 BLADE ..................................................................$716

MISCELLANEOUS OTHER MISC ITEMS, Serial # MS824, ID #MS824, Rezloh 81.5” bolt on Razor Edge ....................................$288

2007 JLG 400S, Serial # 0300110435, ID # 270455, 1630 Hours,Boom Lift, 4 wheel drive, Basket, 2 piec boom, tires @ 1630hrs 85%....................................................................................................$29,0002006 JLG 400S, Serial # 0300096897, ID # X01118, 2301 Hours,Boom Lift, 4 wheel drive, Basket, 2 piec boom, tires @ 2301hrs 85%....................................................................................................$25,0002006 JLG 400S, Serial # 0300097260, ID # X01122, 1690 Hours,40’ Lift ........................................................................................$25,0002005 JLG 400S, Serial # 88051, ID # X00867, 2124 Hours, 40’ Lift....................................................................................................$23,900

2005 JLG 450AJ, Serial # 88287, ID # X00881, 2027 Hours, 45’Lift ..............................................................................................$26,0002007 JLG 460SJ, Serial # 0300111262, ID # 270540, 1546 Hours,46’ Lift ........................................................................................$37,5002006 JLG 460SJ, Serial # 0300099247, ID # X01131, 1031 Hours,46’ Lift ........................................................................................$35,0002005 JLG 460SJ, Serial # 0300087868, ID # X00890, 1992 Hours,46’ Lift ........................................................................................$29,9002005 JLG 460SJ, Serial # 88298, ID # X00888, 1916 Hours, 46’ Lift....................................................................................................$29,9002005 JLG 460SJ, Serial # 87888, ID # X00891, 1904 Hours, 46’Lift ..............................................................................................$29,900

ALLU 304BRKTALL, Serial # BRK651, ID # BRK651, Allu Mini ExcMounting Bracket............................................................................$288ALLU 330BRKTALL, Serial # B52812, ID # BRK609, Allu D LinkageMounting Bracket............................................................................$920ALLU 330BRKTALL, Serial # B52811, ID # BRK610, Allu D LinkageMounting Bracket............................................................................$920ALLU 330BRKTALL, Serial # B52813, ID # BRK606, Pin On SSeries, Allu D Linkage mounting bracket ......................................$920ALLU 330BRKTALL, Serial # 000B52810, ID # BRK612, Pin on SSeries, Allu DB Linkage mounting bracket ................................$1,200ALLU 330BRKTALL, Serial # BRK663, ID # BRK663, Pin on SSeries, Allu DB Linkage mounting bracket ................................$1,200ALLU 330BRKTALL, Serial # BRK665, ID # BRK665, Pin on SSeries, Allu DB Linkage mounting bracket....................................$920CATERPILLAR 301BRKT, Serial # 147-6627BRK533, ID # BRK533,301 H45 Bracket..............................................................................$229 2002 CATERPILLAR 302BRKT, Serial # 155-4468/220184, ID #220184, 302 H50 Bracket ..............................................................$288 2002 CATERPILLAR 302BRKT, Serial # 155-4468/220185, ID #220185, 302 H50 Bracket ..............................................................$288 2005 CATERPILLAR 303BRKT, Serial # 168-8703/251060, ID #251060, 303 H63 Bracket ..............................................................$336 2005 CATERPILLAR 303BRKT, Serial # 000251080, ID # 251080,303 H63 Bracket..............................................................................$558 2005 CATERPILLAR 303BRKT, Serial # 000251084, ID # 251084,303 H63 Bracket..............................................................................$575 2004 CATERPILLAR 303BRKT, Serial # 168-8698/241278, ID #241278, 303 H63 Bracket ..............................................................$575 2003 CATERPILLAR 303BRKT, Serial # 168-8703/230933, ID #230933, 303 H63 Bracket ..............................................................$336CATERPILLAR 303BRKT, Serial # 168-8698BRK175, ID # BRK175,303 H50 Bracket..............................................................................$336CATERPILLAR 303BRKT, Serial # 168-8703BRK503, ID # BRK503,303 H50 Bracket..............................................................................$353CATERPILLAR 303BRKT, Serial # 168-8698BRK504, ID # BRK504,303 H63 Bracket..............................................................................$353 2007 CATERPILLAR 304BRKT, Serial # 277-8941270901, ID #270901, 304C/305C H63 Hammer Top........................................$288 2006 CATERPILLAR 304BRKT, Serial # 000260201, ID # 260201,304/305 CVP16 Bracket ................................................................$288 2004 CATERPILLAR 304BRKT, Serial # 000241831, ID # 241831,304/305 CVP16 Bracket ................................................................$288 2004 CATERPILLAR 304BRKT, Serial # 000241538, ID # 241538,304/305 H63 Bracket......................................................................$288 2003 CATERPILLAR 304BRKT, Serial # 000231013, ID # 231013,304/305 H63 Bracket......................................................................$288 2001 CATERPILLAR 304BRKT, Serial # 000210249, ID # 210249,305/305 H63 Bracket......................................................................$288CATERPILLAR 304BRKT, Serial # 168-8710230342, ID # 230342,304/305 H63 Bracket......................................................................$288CATERPILLAR 304BRKT, Serial # 277-8941BRK291, ID # BRK291,304/305 H63 Bracket......................................................................$288CATERPILLAR 304BRKT, Serial # 277-8941BRK290, ID # BRK290,304C/305C H63 Hammer Top ......................................................$288CATERPILLAR 304BRKT, Serial # 304BRKTBRK493, ID # BRK493,304C/305C H63 Hammer Top ......................................................$288CATERPILLAR 304BRKT, Serial # 265-7461BRK687, ID # BRK687,304C/305C Swivel CVP16 Plate - Still need mounting bracket..$288CATERPILLAR 304BRKT, Serial # 226-7696BRK505, ID # BRK505,Bracket for hammer ........................................................................$288 2010 CATERPILLAR 307BRKT, Serial # 7Q-8466BRK653, ID #BRK653, 307/308 H70-H90,CVP40 Bracket ................................$288CATERPILLAR 307BRKT, Serial # 7Q-8466BRK309, ID # BRK309,307C/308C Bracket - H70-H90, CVP40)......................................$288

2004 CATERPILLAR 315BRKT, Serial # 000240388, ID # 240388,315 Hammer Top ............................................................................$575 2003 CATERPILLAR 315BRKT, Serial # 000230980, ID # 230980,315 Hammer Top ............................................................................$575CATERPILLAR 315BRKT, Serial # 129-1545BRK138, ID # BRK138,315C Bracket - H100-H120, CVP75 ............................................$575CATERPILLAR 318BRKT, Serial # 319BRKTBRK677, ID # BRK677,B Linkage bracket to pick up allied 1600 compactor....................$575CATERPILLAR 318BRKT, Serial # 112-5537BRK223, ID # BRK223,H115-H130, CVP75 (B Linkage) ..................................................$575CATERPILLAR 318BRKT, Serial # 112-5537BRK568, ID # BRK568,H115-H130, CVP75 (B Linkage) ..................................................$575CATERPILLAR 320BRKT, Serial # 112-5537BRK420, ID # BRK420,B Linkage Bracket............................................................................$575CATERPILLAR 320BRKT, Serial # 112-5537BRK424, ID # BRK424,B Linkage Bracket............................................................................$575CATERPILLAR 320BRKT, Serial # 112-5537BRK613, ID # BRK613,B Linkage Bracket............................................................................$575CATERPILLAR 320BRKT, Serial # 112-5537BRK715, ID # BRK715,Mounting Bracket B ........................................................................$575CATERPILLAR 320BRKT, Serial # 112-5537BRK778, ID # BRK778,Mounting Bracket B ........................................................................$575CATERPILLAR 322BRKT, Serial # 128-4341BRK216, ID # BRK216,H120-H140, CVP110 - S Linkage ................................................$288CATERPILLAR 322BRKT, Serial # 128-4341BRK217, ID # BRK217,H120-H140, CVP110 - S Linkage ................................................$288CATERPILLAR 322BRKT, Serial # 128-4341BRK218, ID # BRK218,H120-H140, CVP110 - S Linkage ................................................$288CATERPILLAR 322BRKT, Serial # 128-4341BRK23, ID # BRK23,H120-H140, CVP110 - S Linkage ................................................$288CATERPILLAR 322BRKT, Serial # 128-4341BRK45, ID # BRK45,H120-H140, CVP110 - S Linkage ................................................$288CATERPILLAR 322BRKT, Serial # 128-4341BRK538, ID # BRK538,H120-H140, CVP110 - S Linkage ................................................$288CATERPILLAR 324BRKT, Serial # 251-0068BRK704, ID # BRK704,CB Linkage Bracket ........................................................................$288CATERPILLAR 324BRKT, Serial # 251-0068BRK713, ID # BRK713,CB Linkage Bracket ........................................................................$288CATERPILLAR 324BRKT, Serial # 251-0068BRK714, ID #BRK714, CB Linkage Bracket ........................................................$288CATERPILLAR 324BRKT, Serial # 251-0068, ID # BRK745, CBLinkage Bracket ..............................................................................$288CATERPILLAR 324BRKT, Serial # 251-0068BRK746, ID # BRK746,CB Linkage Bracket ........................................................................$288CATERPILLAR 324BRKT, Serial # 1124833-BRK360, ID # BRK360,CVP110 - C Linkage ......................................................................$288CATERPILLAR 324BRKT, Serial # 251-0068BBRK591, ID #BRK591, H115-H140, CVP110 (CB Linkage) ..............................$288CATERPILLAR 325BRKT, Serial # U325BRKTBRK885, ID #BRK885, 325 C-linkage bracket ....................................................$716CATERPILLAR 325BRKT, Serial # 251-0068BRK384, ID # BRK384,CB Linkage Bracket ........................................................................$460CATERPILLAR 325BRKT, Serial # 325BRK337, ID # BRK337,CVP110 - C Linkage ......................................................................$460CATERPILLAR 325BRKT, Serial # 112-4833BRK520, ID # BRK520,H115-H140, CVP110 (C Linkage) ................................................$460CATERPILLAR 325BRKT, Serial # 112-4833BRK589, ID # BRK589,H115-H140, CVP110 (C Linkage) ................................................$460CATERPILLAR 330BRKT, Serial # 241-3471BRK207, ID # BRK207,C Linkage Bracket, H160, 330C Linkage for short reach application..............................................................................................................$460CATERPILLAR 330BRKT, Serial # 251-4647BRK370, ID # BRK370,DB Bracket ......................................................................................$460CATERPILLAR 330BRKT, Serial # 251-4647BRK541, ID # BRK541,DB Bracket ......................................................................................$460CATERPILLAR 345BRKT, Serial # 241-3471BRK564, ID # BRK564,H160 - C Linkage............................................................................$920CATERPILLAR 345BRKT, Serial # 255-7552BRK235, ID # BRK235,H160-H180 TB Linkage Bracket ....................................................$920CATERPILLAR 345BRKT, Serial # 255-7552BRK260, ID # BRK260,H160-H180 TB Linkage Bracket ....................................................$920CATERPILLAR 345BRKT, Serial # 255-7552BRK234, ID # BRK234,TB Linkage Mounting Bracket........................................................$920 2007 CATERPILLAR BHLBRKT, Serial # 00MS00233, ID #261746, 307C Bracket....................................................................$173 2003 CATERPILLAR BHLBRKT, Serial # 230839, ID # 230839,BHL Top for CVP40 ........................................................................$173CATERPILLAR BHLBRKT, Serial # 251-4624BRK159, ID #BRK159, 446D H100 Bracket ........................................................$173

CATERPILLAR BHLBRKT, Serial # BHLBRKT-BRK559, ID #BRK559, BHL Auger Mounting Bracket ........................................$173CATERPILLAR BHLBRKT, Serial # BHLDBRKT-BRK631, ID #BRK631, BHL Swivel Bracket ........................................................$173CATERPILLAR BHLBRKT, Serial # 231-5149BRK230, ID #BRK230, BHLD/E Bracket - CVP40 Swivel ..................................$173CATERPILLAR BHLBRKT, Serial # 311-2599BRK655, ID #BRK655, BHLD/E Bracket - H70-H90, CVP40 Swivel ................$173 2007 CATERPILLAR BHLBRKTW, Serial # 270635, ID # 270635,307C/416-420D Hammer Top ......................................................$173 2006 CATERPILLAR BHLBRKTW, Serial # 000260780, ID #260780, 307C/416-420D Hammer Top........................................$173 2006 CATERPILLAR BHLBRKTW, Serial # 000260952, ID #260952, 307C/416-420D Hammer Top........................................$173 2005 CATERPILLAR BHLBRKTW, Serial # 000250811, ID #250811, 307C/416-420D Hammer Top........................................$173 2005 CATERPILLAR BHLBRKTW, Serial # 000250813, ID #250813, 307C/416-420D Hammer Top........................................$173 2005 CATERPILLAR BHLBRKTW, Serial # 000250817, ID #250817, 307C/416-420D Hammer Top........................................$173 2004 CATERPILLAR BHLBRKTW, Serial # 000240289, ID #240289, 307C/416-420D Hammer Top........................................$173CATERPILLAR BHLBRKTW, Serial # 209-3306240289A, ID #240289A, BHL Pin Lock Bracket....................................................$173CATERPILLAR SSBRKTA, Serial # 0BRK00699, ID # BRK699, SSLAuger Bracket ..................................................................................$115CATERPILLAR SSBRKTH, Serial # 269-7807BRK143, ID #BRK143, SSL H55/H65 Bracket ....................................................$115CATERPILLAR SSBRKTH, Serial # 269-7807BRK478, ID #BRK478, SSL H55/H65 Bracket ....................................................$115CATERPILLAR SSBRKTH, Serial # 269-7807BRK484, ID #BRK484, SSL H55/H65 Bracket ....................................................$115CATERPILLAR SSBRKTH, Serial # 0BRK00633, ID # BRK633, SSLH55/H65 Bracket ............................................................................$115JOHN DEERE MISC ITEMS, Serial # JD370-BRKT, ID # BRK552,JD 370 Bracket ................................................................................$345MISCELLANEOUS OTHER MISC ITEMS, Serial # JCBBRKT-BRK313, ID # BRK313, Rocky Mountain JCB160 Bracket for CVP75..........................................................................................................$345

2011 CATERPILLAR BA18H, Serial # 0AZN03472, ID # BR255,Hyd Angle Broom........................................................................$3,4502011 CATERPILLAR BA18H, Serial # 0AZN03441, ID # BR256,Hyd Angle Broom........................................................................$3,450CATERPILLAR BP15B, Serial # 0MPB01063, ID # BR97, SSL PickUp Broom ....................................................................................$2,300CATERPILLAR BP18B, Serial # 0DBP01630, ID # BR267, SSL PickUp Broom ....................................................................................$3,200CATERPILLAR SA30, Serial # 0H1W00175, ID # BR235, AngleBroom for Fusion w/wtr ..............................................................$7,4752010 CATERPILLAR THTB, Serial # 000100406, ID # BM23,Telehandler Truss Boom ................................................................$920 2010 CATERPILLAR THTB, Serial # 000100412, ID # BM24,Telehandler Truss Boom ................................................................$920 2010 CATERPILLAR THTB, Serial # THTB-BM25A, ID # BM25,Telehandler Truss Boom ................................................................$920 2010 CATERPILLAR THTB, Serial # THTB-BM27A, ID # BM27,Telehandler Truss Boom ................................................................$920 2009 CATERPILLAR THTB, Serial # THTBBM15, ID # BM15,Telehandler Truss Boom ................................................................$920CATERPILLAR THTB, Serial # 000254227, ID # BM29, TelehandlerTruss Boom......................................................................................$920CATERPILLAR THTB, Serial # 000254226, ID # BM30, TelehandlerTruss Boom......................................................................................$920CATERPILLAR THTB, Serial # 000254224, ID # BM32, TelehandlerTruss Boom......................................................................................$920CATERPILLAR THTB, Serial # 000254223, ID # BM33, TelehandlerTruss Boom......................................................................................$920MAJOR EQUIPMENT 908BA, Serial # 159333, ID # 270842,906/908 Pick Up Broom ............................................................$4,025

2010 ALLU SMH3-12-25, Serial # 10H312001, ID # BU1371, AlluBucket - Drums Worn - fits 46-56,000 lb Excavator ................$8,000CATERPILLAR 30109, Serial # 3019EB1493, ID # EB1493, 9” 301Digging Bucket................................................................................$575CATERPILLAR 30428, Serial # 30428EB273, ID # EB273,304CR/305CR Digging Bucket ......................................................$575

CATERPILLAR 30436, Serial # U30436EB2252, ID # EB2252,304CCR 36” Bucket........................................................................$256CATERPILLAR 31230, Serial # 31230EB239, ID # EB239, 312/31430” HDR Bucket ..........................................................................$1,725CATERPILLAR 31230, Serial # U31230EB1804, ID # EB1804, 31430” Bucket ......................................................................................$511CATERPILLAR 31236, Serial # U31236EB1637, ID # EB1637, 31236” Bucket....................................................................................$1,000CATERPILLAR 31236, Serial # U31236EB1988, ID # EB1988, 31236” Bucket ......................................................................................$800CATERPILLAR 31436, Serial # U31436BU2112, ID # BU2112, 31436” Bucket....................................................................................$1,000CATERPILLAR 31542, Serial # U31542EB1839, ID # EB1839, 31542” Bucket....................................................................................$1,500CATERPILLAR 31542, Serial # U31542EB2520, ID # EB2520, 31542” Bucket....................................................................................$1,200CATERPILLAR 31548, Serial # 84EX00097A, ID # EB1604, 31548” bucket ....................................................................................$1,725CATERPILLAR 31824, Serial # U31824BU1666, ID # BU1666, 31824” Bucket, B linkage ..................................................................$1,000CATERPILLAR 31830, Serial # 0W2F00111, ID # BU695, 318 30”HD bucket, B Linkage..................................................................$1,000CATERPILLAR 31830, Serial # 0Z1K17383, ID # BU1618, 318/31930” HD bucket ................................................................................$575CATERPILLAR 31830, Serial # WAT014043, ID # BU1619,318/319 30” HD bucket..................................................................$575CATERPILLAR 31842, Serial # 0W2F00227, ID # BU922, 318 42”HD bucket, B Linkage..................................................................$1,200CATERPILLAR 31848, Serial # U31848BU1507, ID # BU1507, 31848” Bucket, B linkage ..................................................................$1,500CATERPILLAR 32024, Serial # “C041317A1-24”“BKT”, ID #C041317A1, 320 24” bucket, Fits 318C/320C ESCO ..............$1,000CATERPILLAR 32030, Serial # 0WAT11676, ID # BU1341, 30” HDRBucket ..........................................................................................$1,200CATERPILLAR 32054, Serial # U32054BU1825, ID # BU1825, 32054” Bucket, B linkage ..................................................................$3,0001900 CATERPILLAR 32224, Serial # N32224AR58, ID # AR58,24” 322 HD Bucket......................................................................$1,0001900 CATERPILLAR 32224, Serial # 32224BF63K, ID # BF63, 24”GP Bucket, S Linkage..................................................................$1,0001900 CATERPILLAR 32224, Serial # 32224BF62K, ID # BF62, 24”HD Bucket, S Linkage ................................................................$1,000CATERPILLAR 32224, Serial # C040361A1-24”, ID # C040361A1,322 24” bucket, Fits 322C..........................................................$1,000CATERPILLAR 32224, Serial # C052032A1-24” BKT, ID #C052032A1, 322 24” bucket, Fits 322C....................................$1,0001900 CATERPILLAR 32230, Serial # N32230AR56, ID # AR56,30” 322 HD Bucket......................................................................$1,1001900 CATERPILLAR 32230, Serial # 32230BU166K, ID # BU166,30” HD Bucket ............................................................................$1,200CATERPILLAR 32230, Serial # “C049871A3-30” BKT, ID #C049871A3, 322 30” bucket, Fits 322C....................................$1,200CATERPILLAR 32236, Serial # 32236BU1323, ID # BU1323, 36”322 Bucket ..................................................................................$1,200CATERPILLAR 32236, Serial # 0Z1R10643, ID # BU585, 36” HDR322 Bucket ..................................................................................$1,000CATERPILLAR 32242, Serial # C040160A3-42, ID # C040160A3,322 42” Bucket ............................................................................$1,0001900 CATERPILLAR 32248, Serial # N32248AR60, ID # AR60,48” HD Power Bucket for 322 ....................................................$1,500CATERPILLAR 32260, Serial # U32260BU1683, ID # BU1683, 32260” Bucket, S,B linkage ..............................................................$2,500CATERPILLAR 32448, Serial # U32448BU1573, ID # BU1573, 32448” Bucket, CB linkage................................................................$2,500CATERPILLAR 32460, Serial # 0WAT11725, ID # BU1367, 324 60”Bucket, 2.33 CYD (HD) ..............................................................$2,500CATERPILLAR 32460, Serial # 0WAT05027, ID # BU928, 60” 324HD Bucket, CB Linkage ..............................................................$2,500CATERPILLAR 32460, Serial # 32460BU1142, ID # BU1142, 60”HD Bucket, CB Linkage ..............................................................$2,500CATERPILLAR 32536, Serial # U32536BU2021, ID # BU2021, 32536” Bucket, C linkage..................................................................$1,0221900 CATERPILLAR 32560, Serial # 32560BU226, ID # BU226,60” HD Bucket ............................................................................$2,300CATERPILLAR 33026, Serial # U33026BU2008, ID # BU2008, 33026” Bucket, D linkage..................................................................$2,044CATERPILLAR 34530, Serial # 0Z1K17101, ID # BU1537, 30” HDRBucket - TB Linkage ....................................................................$5,175

AUGER ATTACHMENT

AIR COMPRESSOR

AUGER BITS

AUGER EXTENSION

BACKHOES

BEDS

BLADES

BOLT ON EDGE

BOOM LIFTS

BRACKETS

BROOMS

BUCKETS

2006 JLG 400S, SN# 0300096897, ID# X01118, Boom Lift, 4 wheeldrive, Basket, 2 piec boom, tires @ 2301hrs 85%, 2301 Hrs ..$25,000

1900 ENTEK 31536, SN# 10713, ID# EB66, 315 36” Entek couplerbucket ..............................................................................................$1,725

www.clevelandbrothers.com 866-532-9023 Email: [email protected]

Low-Hour Rental Fleet Roll Out

866-532-9023www.clevelandbrothers.com

Email: [email protected] Located In Pennsylvania, & West Virginia

See next page for more

listings


CATERPILLAR 34542, Serial # U34542BU2262, ID # BU2262, 34542” Bucket, F link ........................................................................$3,578CATERPILLAR 34548, Serial # 0ZIK12800, ID # BU1050, 48” HDRBucket - TB Linkage ....................................................................$5,175CATERPILLAR 34548, Serial # 0Z1K16904, ID # BU1585, 48” HDRBucket - TB Linkage ....................................................................$5,175CATERPILLAR 34548, Serial # Z1K06588, ID # C040845A5, 34548” bucket, Fits 345B..................................................................$5,1751900 CATERPILLAR 34554, Serial # 34554BU262, ID # BU262,54” HD - F Linkage ....................................................................$5,1752006 CATERPILLAR 36575, Serial # Z1K10016, ID # C063703A2,V-Link 75” Bucket........................................................................$7,475CATERPILLAR 904GP, Serial # WFCWGP001766, ID # BH131, 904.80CYD GP Bucket..........................................................................$920CATERPILLAR 904GP, Serial # 904GPBH204, ID # BH204, 905.80CYD GP Bucket..........................................................................$920CATERPILLAR 924GP, Serial # 000128419A, ID # FB561A, 2.3CYDGP ................................................................................................$1,500CATERPILLAR 924LM, Serial # U924LMFB855, ID # FB855, 924LM Bucket....................................................................................$2,044CATERPILLAR 930MH, Serial # 930MHFB570, ID # FB570,4.25CYD MH ..............................................................................$1,200CATERPILLAR 950, Serial # U950COALFB707, ID # FB707, 950Coal Bucket , 114 ........................................................................$4,600CATERPILLAR 963MP, Serial # U963MPFB509, ID # FB509, 963BUCKET, 1.7 CU METER, PART #8V7364 ................................$2,044CATERPILLAR 963MP, Serial # 963MPFB292, ID # FB292, 963C2.5CYD MP Bucket ....................................................................$2,500CATERPILLAR 973GP, Serial # U973GPFB626, ID # FB626, 973GPBUCKET - PART #9V5192..........................................................$1,533CATERPILLAR BHLC18, Serial # BHLD18DB138, ID # DB138, 18”C Series Bucket ..............................................................................$173CATERPILLAR BHLDW36, Serial # CI705000318, ID # DB426, 36”HD Pin Lock Bucket........................................................................$920CATERPILLAR BHLDW36, Serial # 080200391, ID # DB595, 36”HD Pin Lock Bucket........................................................................$920CATERPILLAR BHLGP, Serial # CR612001743, ID # BH206,1.0CYD GP Front Bucket - Is not an IT Bucket ............................$920CATERPILLAR BHLGP, Serial # CV101005172, ID # MS1157,1.4CYD GP Bucket w/BOCE ..........................................................$920CATERPILLAR BHLGP, Serial # CV101005162, ID # MS1158,1.4CYD GP Bucket w/BOCE ..........................................................$920CATERPILLAR BHLGP, Serial # C064052A2-1.4CYD, ID #C064052A2, 430E ST 1.4CYD ......................................................$920 2000 CATERPILLAR M31571, Serial # C004087A2, ID # 231111,M315 71” Swivel Bucket ............................................................$1,725CATERPILLAR M31835, Serial # M31835BU1104, ID # BU1104,M318 35” Bucket ........................................................................$1,380CATERPILLAR M32042, Serial # M32042BU689, ID # BU689,M320 42” Bucket ........................................................................$1,380CATERPILLAR M32230, Serial # M32230-BU1047, ID # BU1047,M322D 30” Bucket......................................................................$1,3802006 CATERPILLAR SSDB54, Serial # 65SSDT001482, ID #260723, SSL 54” Light Material Bucket........................................$345CATERPILLAR SSGP66, Serial # USSGP66SB1681, ID # SB1681,232B 66IN GP BUCKET ................................................................$307CATERPILLAR SSUB66, Serial # SSUB66SB294, ID # SB294, SSL66” Utility Bucket ............................................................................$345 1900 ENTEK 31536, Serial # 10713, ID # EB66, 315 36” Entekcoupler bucket..............................................................................$1,725ESCO CORPORATION 34554, Serial # RH74845, ID # C002828A1,345 54” bucket, 3.0CUYD HDP Bucket ....................................$2,875ESCO CORPORATION 34554, Serial # RH70961, ID # C038291A1,345 54” bucket F Linkage ..........................................................$2,875ESCO CORPORATION E12030, Serial # UE12030EB1301, ID #EB1301, 30IN Bucket, F linkage ....................................................$307 2010 Gar-Bro 423G, Serial # X100145, ID # X100145, ConcreteBucket ..........................................................................................$1,533KENCO 31536SLB, Serial # 141330-1-1, ID # EB1235, 36” Slabbucket - Kenco for 315 excavator ..............................................$2,875WERK-BRAU BHLC18, Serial # DB668, ID # DB668, 18” HD Werk-Brau Bucket......................................................................................$173CATERPILLAR 34574, Serial # 0Z1K17081, ID # BU1517, 74” HDRBucket - TB Linkage ....................................................................$7,475

CATERPILLAR MISC ITEMS, Serial # CP56SFTCAB-MS939, ID #MS939, Fremar Vinyl Cab Enclosure w/heater for CP56 ............$230

CATERPILLAR 350CAB, Serial # U350CABMS756, ID # MS756,350B/350C Cab assembly -Part #19CAB0022B..........................$256

2006 Multiquip VH52A6M, Serial # V5-BN1682, ID # 260975, 30’High Cycle Cable ..............................................................................$51

2010 TOKU CH-3H, Serial # 810099, ID # X100093, ChippingHammer ..........................................................................................$102 2010 TOKU CH-3H, Serial # 810093, ID # X100096, ChippingHammer ..........................................................................................$102 2009 TOKU CH-3H, Serial # 901110, ID # X090204, ChippingHammer ..........................................................................................$102 2009 TOKU CH-3H, Serial # 901111, ID # X090206, ChippingHammer ..........................................................................................$102 2009 TOKU CH-3H, Serial # 901074, ID # X090207, ChippingHammer ..........................................................................................$102

2004 TOKU TCD-30, Serial # 0L005, ID # 240149, 30# Clay Digger..........................................................................................................$204 2004 TOKU TCD-30, Serial # 2K044, ID # 240150, 30# ClayDigger ..............................................................................................$204

BROWN BEAR RC24, Serial # MS662, ID # MS662, R24 BrownBear compost turner..................................................................$10,222

2007 Multiquip G55H, Serial # ZC4800216, ID # X01765,Concrete Vibrator ............................................................................$307 2007 Wacker AR366042, Serial # 1597881, ID # 270014,Concrete Vibrator External Motor ..................................................$200 2007 Wacker AR366042, Serial # 1617181, ID # 270016,Concrete Vibrator External Motor ..................................................$200 2007 Wacker ARFU366115, Serial # 1832889, ID # 270921,Concrete Vibrator External Motor ..............................................$1,800

CATERPILLAR MISC ITEMS, Serial # 0000MS1015, ID #MS1015, 416 Control Kit ..............................................................$575

CATERPILLAR D6TCWT, Serial # D6CWTMS1516, ID # MS1516,D6T Counterweight ........................................................................$575

CATERPILLAR 302CPL, Serial # 302CPLCC598, ID # CC598, 302Manual PG Coupler........................................................................$288 2011 CATERPILLAR 307BRKT, Serial # 0WAB00100, ID # CC726,307C/308C Hyd Quick Coupler ....................................................$288 2005 CATERPILLAR 307CPLW, Serial # 0ATL00837, ID # 250843,307 Coupler ....................................................................................$575 2005 CATERPILLAR 307CPLW, Serial # 0ATL00886, ID # 251152,307 Coupler ....................................................................................$575 2005 CATERPILLAR 307CPLW, Serial # 0ATL00834, ID # 250841,307 Coupler ....................................................................................$358 2003 CATERPILLAR 307CPLW, Serial # 0ATL00477, ID # 231602,307 Coupler ....................................................................................$575 2007 CATERPILLAR 312CPL, Serial # 0MXA10166, ID # 270816,311/312 Coupler to 315 Linkage ..............................................$1,5002007 CATERPILLAR 312CPL, Serial # 0MXA10169, ID # 270818,311/312 Coupler to 315 Linkage ..............................................$1,5002007 CATERPILLAR 312CPL, Serial # 0MXA10168, ID # 270819,311/312 Coupler to 315 Linkage ..............................................$1,5002006 CATERPILLAR 312CPL, Serial # 0MXA10152, ID # 260454,311/312 Coupler to 315 Linkage ..............................................$1,5002006 CATERPILLAR 312CPL, Serial # 0MXA10151, ID # 260455,311/312 Coupler to 315 Linkage ..............................................$1,5002005 CATERPILLAR 312CPL, Serial # 0MXA10141, ID # 250509,311/312 Coupler to 315 Linkage ..................................................$575CATERPILLAR 312CPL, Serial # 608465A, ID # CC582, 311/312Coupler to 315 Linkage ..............................................................$1,500CATERPILLAR 314CPL, Serial # BBA10765, ID # C051799A1, 314coupler ............................................................................................$511CATERPILLAR 325CPL, Serial # 0PGA20510, ID # CU445, 325Coupler ............................................................................................$920

CATERPILLAR 325CPL, Serial # 0C1F10026, ID # CU207, 325Hyd PG Coupler, C Linkage, H&K Design....................................$920CATERPILLAR 325CPL, Serial # 0MXA10165, ID # CU146, 325Hyd PG Coupler, picks up D Linkage............................................$920CATERPILLAR 325CPL, Serial # 0GWK00102, ID # CU421, HydPG Coupler for 325C......................................................................$920CATERPILLAR 330CPL, Serial # U330CPLCU663, ID # CU663,330 Hydraulic coupler ................................................................$3,578CATERPILLAR 330CPL, Serial # 07XW00814, ID # CU382, CenterLock Coupler - DB Linkage ........................................................$1,725CATERPILLAR 345CPL, Serial # 07XW00642, ID # CU162, 345Dedicated CPLR-Does not fit regular buckets (Not TB or F)....$1,3802005 CATERPILLAR BHLDCDW, Serial # CC50200211, ID #250283, Pin Lock Coupler 416-430 E & D ..................................$173CATERPILLAR IT38CPL, Serial # CU427-IT38CPL, ID # CU427,Fusion Coupler for IT38H ..........................................................$1,725CATERPILLAR IT38CPL, Serial # UIT38CPLFA595, ID # FA595,IT38 COUPLER............................................................................$1,533CATERPILLAR IT38CPL, Serial # IT38CPL-MS884, ID # MS884,IT38H Coupler ............................................................................$1,725CATERPILLAR IT38CPLF, Serial # IT38CPLFMS1023, ID #MS1023, IT38H Fusion Coupler................................................$1,725CATERPILLAR IT38CPLF, Serial # 0G7W00104, ID # MS872,IT38H Fusion Coupler ................................................................$1,725GEITH INC 312CPL, Serial # 507867, ID # CC141, Geith The Clawmanual coupler for 315CL ............................................................$288 2001 HELAC CORPORATION 302CPL, Serial # T61053, ID #210704A, 302 Helac Coupler ....................................................$1,1502004 HELAC CORPORATION 304CPL, Serial # T73205, ID #240975A, 304C/305D Swivel Coupler ......................................$1,150HELAC CORPORATION PT07, Serial # T75518, ID # CC421, PT7Tilt Coupler for 420E or 430E ........................................................$920

2011 CAT D6N LGP, Serial # 0GHS00827, ID # 100641, 1967Hours, Dozer, Erops, A/C, Straight blade, draw bar ............$205,5002010 CAT D7E, Serial # 0MDB00141, ID # 090158, 1811 Hours,Dozer, Erops, A/C, SU blade, MS ripper ..............................$400,0002010 CAT D8T, Serial # 0KPZ03692, ID # 100151, 2508 Hours,Dozer, EROPS, A/C, SU blade, SS Ripper, UC @ 2508hrs avg. 60-80%, 24in shoes ....................................................................$433,5002009 CATERPILLAR D4K XL, Serial # 0MMM00430, ID #080925A, 1147 Hours, Dozer, Erops, A/C, PAT blade, drawbar,sweeps, UC @ 1147hrs 85-95% 18in shoes ........................$77,2001994 CATERPILLAR D5H LGP, Serial # 01DD06193, ID #UT12955, 17445 Hours, Dozer, Erops, A/C, PAT Blade, lever steering,Draw bar, UC @ 17445hrs avg. 40-65%, 34I’’shoes ............$18,4002011 CATERPILLAR D6K LGP, Serial # 0DHA01583, ID # 100638,2249 Hours, Dozer, Erops, A/C, Straight blade, drawbar ....$126,0002011 CATERPILLAR D6K LGP, Serial # 0DHA01377, ID # 110023,1190 Hours, Dozer, Erops, A/C , PAT blade, drawbar UC @ 1185hrs70-85%, 30in shoes ..............................................................$132,0002011 CATERPILLAR D6K LGP, Serial # 0DHA01502, ID # 100851,1873 Hours, Dozer, Erops, A/C, straight blade accugrade ready ..........................................................................................................$123,9002011 CATERPILLAR D6N LGP, Serial # 0GHS00538, ID # 1010021709 Hours, Dozer, Cab, A/C ................................................$189,1112008 CATERPILLAR D6N XL, Serial # 0DJA01026, ID # 080354,2117 Hours, Dozer, Erops, PAT blade, aux. hyd., accugrade ready ......................................................................................................$169,0002011 CATERPILLAR D6T XL, Serial # 0GMK00101, ID # 100980,869 Hours, Dozer, EROPS, A/C, SU blade, Drawbar ..........$270,0002011 CATERPILLAR D6T XL, Serial # 0GMK00255, ID # 111448,207 Hours, Dozer, Erops, A/C, 24in shoes ..........................$290,0002011 CATERPILLAR D6T XL, Serial # 0GMK00161, ID # 100979,931 Hours, Dozer, Erops, A/C, 24in shoes ..........................$288,9002011 CATERPILLAR D6T XL, Serial # 0GMK00342, ID # 110245,143 Hours, Dozer, Erops, A/C, sweeps, Winch, SU Blade, UC @143hrs 99%............................................................................$312,0002011 CATERPILLAR D6T XL, Serial # 0GMK00339, ID # 110246,550 Hours, Dozer, Erops, A/C, 24in shoes ..........................$305,9002011 CATERPILLAR D6T XL, Serial # 0GMK00142, ID # 110441,639 Hours, Dozer, Erops, A/C, 24in shoes ..........................$305,9002010 CATERPILLAR D6T XL, Serial # 0LAY01570, ID # 100404,667 Hours, Dozer, Erops, A/C , SU blade, Winch, sweeps..$283,5002011 CATERPILLAR D6T XL R, Serial # 0GMK00108, ID #110305, 947 Hours, Dozer, Erops, A/C, SU blade, MS ripper, uc @947hrs avg. 85-90%, 24in shoes ........................................$278,900

2010 CATERPILLAR D6T XL W, Serial # 0LAY01555, ID #100157, 1045 Hours, Dozer, Cab, A/C, Straigh blade, NO Winch, UC@ 1045hrs 85-95% ..............................................................$250,4442010 CATERPILLAR D6T XL W, Serial # 0LAY01566, ID #100156, 1473 Hours, Dozer, Cab, A/C, SU Blade, NO Winch, UC @1449hrs 98%..........................................................................$250,4442011 CATERPILLAR D6T XW, Serial # 0SLJ00148, ID # 110082,242 Hours, Dozer, Erops, A/C, SU blade..............................$305,9002011 CATERPILLAR D6T XW, Serial # 0SLJ00149, ID # 110083,350 Hours, Dozer, Erops, A/C, SU blade..............................$305,9002011 CATERPILLAR D6T XW, Serial # 0SLJ00170, ID # 110235,648 Hours, Dozer, Erops, A/C, 24In shoes ..........................$289,9002011 CATERPILLAR D6T XW, Serial # 0SLJ00147, ID # 110081,388 Hours, Dozer, Erops, A/C, 24In shoes ..........................$305,9002010 CATERPILLAR D7R, Serial # 0AEC02369, ID # 090333, 1818Hours, Dozer, Erops, A/C, SU Blade, MS ripper, UC @ 1818hrs 90-95%, 24in shoes ....................................................................$400,0001971 CATERPILLAR D8H, Serial # 046A25694, ID # UT12605,3611 Hours, Dozer, NO Blade, Scraper tractor, OROPS, split scraperwinch, drawbar, no blade hyd, UC @ 3611hrs 40-60%........$10,2221971 CATERPILLAR D8H, Serial # 046A25076, ID # UT12587,3995 Hours, Dozer, NO Blade, Scraper tractor, OROPS, split scraperwinch, drawbar, no blade hyd. 3995HRS 70-99%, 24” Shoes 99%, ......................................................................................................$10,2221971 CATERPILLAR D8H, Serial # 046A25072, ID # UT12585,5890 Hours, Dozer, NO Blade, Scraper tractor, OROPS, split scraperwinch, UC @ 5890HRS, 24” shoes @ 99%, bushings 85%, links40%, seg. 85%, idler 60%, rollers..........................................$10,2222011 CATERPILLAR D8T, Serial # 0KPZ03827, ID # 100924, 1965Hours, Dozer, Erops, A/C, 24in shoes, SU Blade ................$455,9002010 CATERPILLAR D8T W, Serial # 0KPZ03717, ID # 100241,2176 Hours, Dozer, Cab, A/C ................................................$383,333

CATERPILLAR D8DRWBAR, Serial # UD8RDRWBARCT85, ID #CT85, D8R DRAWBAR ASSMBLY ................................................$767

2004 GME TRENCH PROTECTI END PANEL, Serial #M04081559, ID # 241179, End panel - Pit kit style end ............$307 2004 GME TRENCH PROTECTI END PANEL, Serial #M04081560, ID # 241180 1 Hours, End panel - Pit kit style end$307 2004 GME TRENCH PROTECTI END PANEL, Serial #M04081561, ID # 241181, End panel - Pit kit style end ............$307 2004 GME TRENCH PROTECTI END PANEL, Serial #M04081656, ID # 241183, End panel - Pit kit style end ............$307

2009 CAT 321DLCR, Serial # 0NAS00345, ID # 080560, 4224Hours, Exc, EROPS, A/C, Aux. Hyd., Quick coupler, UC @ 4209hrs80-99%, 31in shoes ..............................................................$125,0002008 CAT 321DLCR, Serial # 0NAS00170, ID # 071169A, 3966Hours, Exc, Erops, A/C, Aux. Hyd., Quick coupler, 36in bkt., UC @3966hrs avg 70-80%, 31in shoes ........................................$119,9002008 CAT 325DL, Serial # 0A3R01045, ID # 070823, 3571 Hours,Exc, Erops, A/C, Aux. hyd., Quick coupler, 31.5in shoes....$133,5002009 CAT 329DL, Serial # 0JHJ00317, ID # 081069, 2728 Hours,Exc, Erops, A/C, Aux Hyd, Quick coupler, travel straight pedal, patternchanger, plumbed to stick for hammer, 32in shoes ............$200,0002008 CAT 330DL T, Serial # 0MWP02801, ID # 071158, 5267Hours, Exc, Erops, A/C, Aux. Hyd., Quick coupler, hyd. Thumb. UC@ 5243hrs avg 60-85%, 21in shoes. ..................................$155,6001989 CATERPILLAR 225B, Serial # 02ZD01798, ID # UT12935,12871 Hours, Excavator, Cab, Bkt, Long Stick, UC @ 12871HRS 50-70%, 30IN Triple Grouser 70% ..............................................$14,3112011 CATERPILLAR 312DL, Serial # 0XGK00230, ID # 100727,947 Hours, Exc, Cab, A/C, Aux. Hyd., Plumber to stick for coupler ....................................................................................................$120,0002005 CATERPILLAR 314CCR, Serial # 0KJA00159, ID #UP12724, 125 Hours, Excavator, Cab, A/C, 42in Bucket, levelingBlade, UC @ 4982hrs 50-75% ..............................................$53,1562011 CATERPILLAR 320DL, Serial # 0SPN00504, ID # 100734,1712 Hours, Exc, Cab, A/C, Coupler, 31” TG with guarding$150,0002011 CATERPILLAR 320DL, Serial # 0SPN00505, ID # 100733,1748 Hours, Exc, Cab, A/C, Aux, Hyd., Quick coupler, 1 piece boom,UC @ 1748hrs 80-85%, 31in shoes....................................$150,0002010 CATERPILLAR 320DL, Serial # 0PHX02671, ID # 100752,2016 Hours, Exc, Cab, A/C, Aux. Hyd., Combined function Hyd. ........................................................................................................$130,000

2009 CATERPILLAR 321DLCR, Serial # 0NAS00409, ID #080805, 3315 Hours, Exc, Cab, A/C, Aux, Hyd., Quick coupler,Plumbed to stick for hammer, 1 piece boom, UC @ 3307hrs 85-95%, 31in shoes ....................................................................$135,0002008 CATERPILLAR 330DL, Serial # 0MWP03161, ID # 080075,4252 Hours, Exc, Cab, A/C, Aux, Hyd., Quick coupler, Plumbed tostick for hammer, 1 piece boom, UC @ 4252hrs 80-90%, 31.5inshoes ......................................................................................$160,0002007 CATERPILLAR 345CL, Serial # 0PJW01759, ID # 060678,9095 Hours, Excavator, Cab, A/C ............................................$94,0442011 CATERPILLAR 345DL, Serial # 0EEH01027, ID # 110330,1817 Hours, Exc, Cab, A/C, Aux, Hyd., 12st 10in stick ......$330,0002011 CATERPILLAR 345DL, Serial # 0EEH01028, ID # 110331,1665 Hours, Exc, Cab, A/C, 1 piece boom, UC @ 1665hrs 95-99%..................................................................................................$335,0002008 CATERPILLAR M316D, Serial # 0W6A00711, ID # 071135,3019 Hours, Excavator, Cab, A/C, aux. hyd., 8’6” stick..........$86,889

CATERPILLAR MISC ITEMS, Serial # 208-5116MS1254, ID #MS1254, 740 Exhaust Piping........................................................$920CATERPILLAR MISC ITEMS, Serial # 208-5116MS1255, ID #MS1255, 740 Exhaust Piping........................................................$920CATERPILLAR MISC ITEMS, Serial # 208-5116MS1259, ID #MS1259, 740 Exhaust Piping........................................................$920CATERPILLAR MISC ITEMS, Serial # 208-5116MS1260, ID #MS1260, 740 Exhaust Piping........................................................$920

CATERPILLAR 938FRKS, Serial # U938FRKSFA696, ID # FA696,938 48in forks..............................................................................$2,556CATERPILLAR 938FRKS, Serial # U938FRKSFA593, ID # FA593,938 96in forks..............................................................................$2,556CATERPILLAR 938FRKS, Serial # 07PW03123, ID # FA409, 96”Forks ............................................................................................$1,725CATERPILLAR 938FRKS, Serial # FA498-938FRKS, ID # FA498,Bobcat Pin on 60” Forks for CAT 938........................................$1,725CATERPILLAR 950GP, Serial # 0B1E05000, ID # FB709, IT 54”Forks ............................................................................................$5,175CATERPILLAR CWLF48, Serial # 65SSXX000478, ID # CF502,904 48” Forks..................................................................................$690CATERPILLAR CWLF48, Serial # CWLF48CF115, ID # CF115, 90648” Forks ........................................................................................$690CATERPILLAR IT62F60, Serial # FA485ITF60, ID # FA485, 60”Forks ............................................................................................$1,725CATERPILLAR IT62F60, Serial # IT6260FFA353, ID # FA353, PalletForks ............................................................................................$1,725CATERPILLAR IT62FRKS, Serial # C053052A4-FORK, ID #C053052A4, IT 62H Forks..........................................................$1,725CATERPILLAR ITF60, Serial # ITF60F-FA526, ID # FA526, 60”Fusion Forks................................................................................$1,725CATERPILLAR ITF72, Serial # 0B1H04209, ID # FA566, 72” FusionForks ............................................................................................$1,725CATERPILLAR ITF72, Serial # 0B1H04466, ID # FA636, 72” FusionForks ............................................................................................$1,725CATERPILLAR ITFPIPE, Serial # 0AKR15291, ID # FA572, 72”Pipe Forks for IT38H Fusion Coupler......................................$14,375CATERPILLAR SSFU72, Serial # SSFU72, ID # CF17, SSL 72”Utility Forks......................................................................................$460MISCELLANEOUS OTHER THF48, Serial # SSF48CF150, ID #CF150, DO NOT FIT CAT MACHINES - SSL off brand forks ..$1,329ROCKLAND INC ITFCLAMP, Serial # R18115, ID # C053087A1,IT28 Logging Forks - Top Middle Tine........................................$4,025ROCKLAND INC PG-2, Serial # R58785, ID # FA444, Rockland PG-2Pipe Grapple Forks....................................................................$14,375

2010 CATERPILLAR GP5600A, Serial # 5893040, ID # X100031,1 Hours, 5.6 KW Generator ........................................................$1,2002001 SULLAIR 375CFM, Serial # 004-135169, ID # ERAA0014,3150 Hours, Generator, 375CFM, 150M max PSI, 4410 lbs weight,48 gallon gal. fuel tank, 6.1 gpu fuel use, surge brakes, pintel hitch,louvers on after cooler ..............................................................$12,7782011 WACKER GP5600A, Serial # 20030114, ID # X110308, 5.6KW WACKER GENERATOR W/HONDA GAS,WHEEL KIT,ELEC START......................................................................................................$1,3292011 WACKER GP5600A, Serial # 20030113, ID # X110310, 5.6KW WACKER GENERATOR W/HONDA GAS,WHEEL KIT,ELEC START......................................................................................................$1,329

CAB

CAB ASSEMBLY

CABLE

CHIPPING HAMMERS

CLAY DIGGERS

COMPOST TURNER

CONCRETE VIBRATORS

CONTROL KIT

COUNTER WEIGHT

COUPLERS

DOZERS

EXCAVATORS

END PANELS

DRAWBAR ASSEMBLY

EXHAUST PIPING

FORKS

GENERATORS

2006 CATERPILLAR 312CPL, SN# 0MXA10152, ID# 260454311/312 Coupler to 315 Linkage ..................................................$1,500

2001 SULLAIR 375CFM, SN# 004-135169, ID# ERAA0014,Generator, 375CFM, 150M max PSI, 4410 lbs weight, 48 gallon gal.fuel tank, 6.1 gpu fuel use, surge brakes, pintel hitch, louvers on aftercooler, 3150 Hrs ............................................................................$12,778






2010 Wacker GP5600A, Serial # 5892206, ID # X100114, 5.6 KWGenerator......................................................................................$1,2002010 Wacker GP5600A, Serial # 5929589, ID # X100340, 5.6 KWGenerator......................................................................................$1,200

2002 NPK INC E205, Serial # 72740, ID # A22036, E205 Hammer......................................................................................................$3,0672002 NPK INC E205, Serial # 72742, ID # A22037, E205 Hammerw/’C’Bracket, Hyd. Quick disconnects, no heads ......................$3,067

CATERPILLAR MISC ITEMS, Serial # 113-2677MS483, ID #MS483, IT Blank Hooks w/Pintle Hitch ........................................$920

2008 Allmand Brothers Night-Lite, Serial # 1737PRO08, ID #X080088, 4397 Hours, Light Plant ............................................$3,8002008 Allmand Brothers Night-Lite, Serial # 1738PRO08, ID #X080087, 3722 Hours, Light Plant ............................................$3,900

CATERPILLAR ITMH, Serial # ITMH00MS1007, ID # MS1007,IT38H Material Handling Arm ....................................................$1,725

GOMACO MISC ITEMS, Serial # MISC-MS1137, ID # MS1137,(2) 4’ FRAME EXTENSIONS, (3) 12’ SPANIT INSERTS, (2) 3’ SPANITINSERTS ......................................................................................$5,175

2009 CATERPILLAR 120M, Serial # 0D9W00128, ID # 100194,913 Hours, Motor Grader, Cab, A/C, tires @ 913hrs 95% $184,000

2011 CATERPILLAR 247B, Serial # 0TSL00729, ID # 110088, 515Hours, MTL, Cab, A/C, UC @ 359hrs, 15in rubber tracks 80%..............................................................................................................$29,0002005 CATERPILLAR 247B, Serial # 0MTL02391, ID # UP12463,1193 Hours, MTL, Canopy, 74in Bucket, UC @ 1193HRS 80% ............................................................................................................$19,4222005 CATERPILLAR 257B, Serial # 0SLK03397, ID # UT13001,2957 Hours, MTL, Cab, Tier II Engine, 2 Speed Travel, High flow, Eleconn for implements, 14.5IN tracks 50% @ 2808HRS ........$15,333

CATERPILLAR MISC ITEMS, Serial # MISCITEMS-MS838, ID #MS838, Two 30’ Onboard levelers ................................................$920

Brown Bear SC3610, Serial # SC36B015, ID # MS215, PaddleAerator........................................................................................$17,250Brown Bear SC3610, Serial # SC36B-016, ID # MS216, PaddleAerator........................................................................................$17,250

2003 CATERPILLAR AP650B, Serial # 09DN00513, ID #UT12861, 6951 Hours, Paver, Tier II engine ..........................$51,1112007 CATERPILLAR CB534D XW, Serial # 0EAA00571, ID #UP12180, 3361 Hours, Paver, ROPS/FOPS/CANOPY, Tier I engine,Standard nozzles, Versa Vibe system, cocoa mats, off set hitch, 783/4” solid drum ........................................................................$54,1782007 CATERPILLAR CB534D XW, Serial # 0EAA00590, ID #UP12179, 3283 Hours, Paver, ROPS/FOPS/CANOPY, Tier I engine,Standard nozzles, Versa Vibe system, mats, off set hitch, 78 3/4” soliddrum ..........................................................................................$54,1782005 CATERPILLAR CB534D XW, Serial # 0EAA00370, ID #UP11570N, 2855 Hours, Paver, ROPS/Platform, working lights, hitch,Versa vibe system, high intensity lights ..................................$56,222

2007 SULLAIR MPB-35C, Serial # 0240127P, ID # X01758, 35LBPaving Breaker ................................................................................$228 2007 SULLAIR MPB-35C, Serial # 0240657P, ID # X01759, 35LBPaving Breaker ................................................................................$228 2004 SULLAIR MPB-90AF, Serial # 0680554, ID # X00660, 1Hours, 90LB Paving Breaker..........................................................$342 2010 TOKU TPB-90, Serial # 10A030, ID # X100077, 90#Pavement Breaker ..........................................................................$307

2010 TOKU TPB-90, Serial # 10A055, ID # X100078, 90#Pavement Breaker ..........................................................................$307 2010 TOKU TPB-90, Serial # 10A015, ID # X100081, 90#Pavement Breaker ..........................................................................$307 2010 TOKU TPB-90, Serial # 10A001, ID # X100083, 90#Pavement Breaker............................................................................$307

2008 CATERPILLAR LR15B, Serial # 0EFS00427, ID # LR98, SSLLandscape Rake ..........................................................................$4,0252007 CATERPILLAR LR15B, Serial # 0EFS00401, ID # LR51, SSLLandscape Rake ..........................................................................$4,025ROCKLAND INC BR10, Serial # R56795B, ID # MS847, BR BladeRake for D4G XL..........................................................................$2,875TORO / DINGO TDGPLB, Serial # 270000177, ID # GA51, ToroDingo Grapple Rake........................................................................$920

1999 Rammax RW1404-33, Serial # 325864, ID # R99047, 2325Hours, Remote Roller ..................................................................$4,000

2005 Vermeer RT450, Serial # 818, ID # 250892, 759 Hours, RideOn Trencher ..............................................................................$13,000

CATERPILLAR 777TIRES, Serial # U777TIRESMS1024, ID #MS1024, (4) 24.00-49 777B Mode type, RIMS ONLY

WERK-BRAU 325RIP, Serial # WBRT3-325DRIP, ID # RR111, 30”Frost Ripper..................................................................................$1,725

2000 AMERICAN PNEUMATIC RB-133, Serial # 294739, ID #200568, Rivet Buster ......................................................................$150

2002 SULLAIR MRD55, Serial # 02250094-9, ID # ERDD0001,Rock Drill ........................................................................................$358 2008 TAMCO THB-110N, Serial # 804069, ID # X080496, 15#Rock Drill ........................................................................................$256 2008 TAMCO THB-110N, Serial # 804057, ID # X080497, 15#Rock Drill ........................................................................................$256 2008 TAMCO THB-110N, Serial # 804019, ID # X080498, 15#Rock Drill ........................................................................................$256 2007 TAMCO THB-110N, Serial # 701036, ID # 270858, 15# RockDrill ..................................................................................................$204 2007 TAMCO THB-110N, Serial # 701021, ID # 270859, 15# RockDrill ..................................................................................................$256 2007 TAMCO THB-110N, Serial # 701016, ID # 270860, 15# RockDrill ..................................................................................................$256 1999 TOKU RD-115, Serial # 254202, ID # 99019, 23# Rock Drill............................................................................................................$102 2001 TOKU RD-137, Serial # 0935M137, ID # 210241, 45# RockDrill ..................................................................................................$153 2007 TOKU RD-7, Serial # 5L015, ID # 270282, 8# Rock Drill$204 2007 TOKU RD-7, Serial # 4D022, ID # 270284, 8# Rock Drill$204 2007 TOKU RD-7, Serial # 4L033, ID # 270285, 8# Rock Drill$204 2004 TOKU THD-1100U, Serial # 307015, ID # 240152, 15# RockDrill ..................................................................................................$256

2005 CAT CB534D XW, Serial # 0EAA00387, ID # 070914, 1320Hours, Roller, 2 Drum, Canopy, Operator Station, Spray System,Vibratory ....................................................................................$55,9002011 CAT CP56, Serial # 0C5P00523, ID # 100570, 867 Hours,Roller, Cab, A/C ......................................................................$127,8002011 CAT CP56, Serial # 0C5P00521, ID # 100572, 812 Hours,Roller, Cab, A/C ......................................................................$127,8002010 CAT CP56, Serial # 0C5P00505, ID # 100057, 2141 Hours,Roller, Cab, A/C, Pad foot, leveling blade ............................$113,5002010 CAT CP56, Serial # 0C5P00464, ID # 090342, 1335 Hours,Roller, Cab, A/C, Pad foot, leveling blade ............................$120,0002010 CAT CS323C, Serial # 0DAR00466, ID # 090282, 216 Hours,Roller, OROPS, Canopy, smooth drum, tires @ 215hrs 95-99% ............................................................................................................$55,5002008 CAT CS433E, Serial # 0ASR01012, ID # 080023, 776 Hours,Roller, OROPS, Vibratory, Canopy, smooth drum, tires @ 775hrs90% ..........................................................................................$55,500

2006 CATERPILLAR CB114, Serial # 0C2Z00192, ID # 050322,420 Hours, Roller, Hand rail, back up alarm, lights................$14,5002008 CATERPILLAR CB14, Serial # 0DST00262, ID # 080264A,325 Hours, Roller, ROPS, Lights, water spray ........................$17,5002007 CATERPILLAR CB534D, Serial # 0FGH00746, ID # 080519,2000 Hours, Roller, ROPS/FOPS, Versa Vibe system, Hitch, Waterdistribution system....................................................................$60,0002007 CATERPILLAR CB564, Serial # 0C6D00149, ID # 080480,1622 Hours, Roller, ROPS/FOPS, Versa Vibe system, Hitch, Waterdistribution system....................................................................$66,4442011 CATERPILLAR CP56, Serial # 0C5P00527, ID # 100571,669 Hours, Roller, Erops, A/C, Leveling blade, Vibratory, Pad foot,tires @ 669hrs 97% ..............................................................$132,0002011 CATERPILLAR CP56, Serial # 0C5P00584, ID # 101032,972 Hours, Roller, Erops, A/C, Leveling blade, Vibratory, Pad foot ......................................................................................................$127,8002011 CATERPILLAR CS56, Serial # 0C5S01185, ID # 100568, 995Hours, Roller, Erops, A/C, Smooth drum, Tires @ 995hrs new............................................................................................................$123,0002010 CATERPILLAR CS56, Serial # 0C5S01151, ID # 100408,1618 Hours, Roller ................................................................$112,4442010 CATERPILLAR CS56, Serial # 0C5S01182, ID # 100563, 484Hours, Roller, Erops, A/C ......................................................$123,0002004 MMD PP80, Serial # VHS1-50151, ID # 250938, Art VibRoller, 24” smooth drum ............................................................$3,200

1972 CATERPILLAR 613, Serial # 071M00954, ID # UT12630,1104 Hours, Scarper, OROPS, Paddle tires @ 1102HRS RF 20%, LF95% Rears 25%........................................................................$10,2221972 CATERPILLAR 613, Serial # 071M01282, ID # UT12629,2150 Hours, Scraper, OROPS, TIRES @ 25%, NEW FLIGHT CHAINS....................................................................................................$10,222

TORO / DINGO TDSC, Serial # 260000109, ID # MS487, ToroDingo Soil Cultivator ..................................................................$1,725

GME TRENCH PROTECTI GMEA2844, Serial # A28443, ID #X00974, 28” - 44” Adjustable Spreader Bars - GME Aluminum$307GME TRENCH PROTECTI GMEBAR24, Serial # GMEBAR24TB36,ID # TB36, 8” X 24” Spreader bar set ..........................................$307GME TRENCH PROTECTI GMEBAR24, Serial # D8851A, ID #X01393A, 8” X 24” Spreader bar set............................................$307GME TRENCH PROTECTI GMEBAR24, Serial # D8852, ID #X01394, 8” X 24” Spreader bar set ..............................................$307GME TRENCH PROTECTI GMEBAR24, Serial # D8853, ID #X01395, 8” X 24” Spreader bar set ..............................................$307GME TRENCH PROTECTI GMEBAR24, Serial # 260592, ID #260592, 24” Spreader set 4 - GME Trench box............................$307GME TRENCH PROTECTI GMEBAR36, Serial # TB50, ID # TB50,PRO-TEC set OF 36” Spreader Bars..............................................$307GME TRENCH PROTECTI GMEBAR72, Serial # GMEBAR72, ID #MS465, 72” Spreader pipe for manhole shields of 4 ..................$307GME TRENCH PROTECTI GMEBAR72, Serial # 8DS72X02105A,ID # X02105A, 72” Spreader pipe for manhole shields of 4........$307KUNDEL KUNADJBAR, Serial # KUNAJDX01960A, ID # X01960A,6” - 24” ADJUSTABLE Spreader Bars 3” - A STYLE 290 LBS....$102KUNDEL KUNADJBAR, Serial # 270833, ID # 270833, 6” - 24”ADJUSTABLE Spreader Bars 4” - B STYLE 150 LBS..................$102KUNDEL KUNADJBAR, Serial # 270769, ID # 270769, 6” - 24”ADJUSTABLE Spreader Bars 6” - C STYLE 290 LBS..................$102KUNDEL KUNADJBAR, Serial # 270838, ID # 270838, 6” 24”ADJUSTABLE Spreader Bars 6” C STYLE 290 LBS ....................$102KUNDEL KUNADJBAR, Serial # 270834, ID # 270834, 6” 24”ADJUSTABLE Spreader Bars 4” B STYLE 150 LBS ....................$102KUNDEL KUNADJBAR, Serial # KUNAJDX01961, ID # X01961, 6”24” ADJUSTABLE Spreader Bars 6” C STYLE 290 LBS..............$102KUNDEL KUNADJBAR, Serial # 270841, ID # 270841, 6” 24”ADJUSTALE Spreader Bars 6” C STYLE ......................................$102KUNDEL KUNBAR24, Serial # KUNBAR24X01954, ID # X01954,24” Spreader BAR (SET OF 4) 6” A-STYLE..................................$102

KUNDEL KUNSPC, Serial # TB12, ID # TB12, Stacking plates forTitan 3/SET4 ......................................................................................$77KUNDEL KUNSPC, Serial # TB09, ID # TB09, Stacking plates forTitan 5/SET4 ......................................................................................$77KUNDEL KUNSPC, Serial # TB10, ID # TB10, Stacking plates forTitan 5/SET4 ......................................................................................$77

CATERPILLAR 307STK, Serial # C063820A1, ID # C063820A1,307C Stick....................................................................................$1,725CATERPILLAR 307STK, Serial # C063821A1, ID # C063821A1,307C Stick....................................................................................$1,725CATERPILLAR 312STK, Serial # C980258A1-8-2-STICK, ID #C980258A1, 8’2” 312 unit..............................................................$575CATERPILLAR 320STK, Serial # U320STKMS767, ID # MS767,320 stick - Part #4I6555 ................................................................$511CATERPILLAR 330STK, Serial # 1LL23914, ID # MS234, 330DL10’6” Stick....................................................................................$5,175CATERPILLAR 365STK, Serial # U365STKMS1324, ID # MS1324,365 Stick, 13’ 6”“ ........................................................................$6,133CATERPILLAR 375STK, Serial # C976773A2-9-7- STICK, ID #C976773A2, 9’7” Stick - J Family Bucket Linkage ..................$9,775

CATERPILLAR SG16B, Serial # 0MAP00679, ID # SG14, SSLStump Grinder ............................................................................$4,025

CATERPILLAR MISC ITEMS, Serial # UD6TSWEEPSMS1471, ID #MS1471, D6T SWEEPS..............................................................$3,884

CATERPILLAR 307BRKT, Serial # 264-5907BRK671, ID # BRK671,307D/308D Swivel Plate - Still need bracket H70-H90, CVP40 $288CATERPILLAR 307BRKT, Serial # 264-5907BRK691, ID # BRK691,307D/308D Swivel Plate - Still need bracket H70-H90, CVP41 $288

MISCELLANEOUS OTHER 740GATE, Serial # 740GATEMS967, ID# MS967, 740 Rumble Gate ......................................................$7,475

2004 CATERPILLAR TH560B, Serial # 0SLG00694, ID # UT127473729 Hours, Telehandler, 4 Wheel drive, 3 Piece boom, Front coupler,Forks, Front Elec. Hook up, Tires @ 3729HRS @ 0%..........$43,9562003 CATERPILLAR TH560B, Serial # 0SLG00314, ID #UT12746, 4170 Hours, Telehandler, 4 Wheel drive, 3 Piece boom,Front coupler, Forks, Front Elec. Hook up, Tires @ 4170hrs 0-20% ......................................................................................................$40,8892008 JLG INDUSTRIES INC TL1055, Serial # TBM01018, ID #X080390, 2774 Hours, Telehandler ........................................$49,0672007 JLG INDUSTRIES INC TL1055, Serial # TBM00472, ID #UP11729N, 3854 Hours, Telehandler, All wheel drive, Forks, Tires @50% ..........................................................................................$47,0222007 JLG INDUSTRIES INC TL1255, Serial # TBN00171, ID #UP12165, 4508 Hours, Telehandler, 55’ Lift height, 48” Forks, 4 Maststages, 12000lbs max lift capacity, 17.5-25 Tires @ 4320HRS, Fronts99%, RR 70%, LR 50% ..........................................................$53,1562007 JLG INDUSTRIES INC TL642, Serial # TBK00114, ID #X01448, 4075 Hours, Telehandler, Single joystick, w./ rocker, ROPS,Cab, Aux. Hyd., 4-Speed power shift, planetary drive axle, 4 wheeldrive, wet disc service brakes ..................................................$33,733

CATERPILLAR 318TH, Serial # 318TH-T141, ID # T141, HydThumb..........................................................................................$1,725CATERPILLAR 320TH, Serial # 0PMZ01227, ID # T14, 320 thumb..........................................................................................................$511CATERPILLAR BHLT, Serial # 00BT00340, ID # BT340, BHL ThumbTine B1 Only....................................................................................$575 2003 WERK-BRAU BHLT, Serial # 9695504, ID # 230059, BHLThumb..............................................................................................$575

CATERPILLAR MISC ITEMS, Serial # M318DMHWHEELS, ID #MS831, M318D MH Solid Tires w/Rims..................................$4,600CATERPILLAR 769TIRES, Serial # U769TIRESCT52, ID # CT52,769 (7) QTY 1800.33 tires..........................................................$5,111CATERPILLAR MISC ITEMS, Serial # 249-7841MS1168, ID #MS1168, 17.5R25 BS Tires........................................................$2,300

CATERPILLAR MISC ITEMS, Serial # 00MS01034, ID # MS1034,257B2 Set of slightly used tracks ..................................................$575

2007 Mult iquip QP4TH, Serial # 4TH-1010, ID # 270126, 4” TrashPump ..............................................................................................$613 2011 WACKER PT2A, Serial # 20026982, ID # X110304, 2” TrashPump ..............................................................................................$511 2011 WACKER PT2A, Serial # 20026983, ID # X110305, 2” TrashPump ..............................................................................................$511 2011 WACKER PT2A, Serial # 20026984, ID # X110306, 2” TrashPump ..............................................................................................$511 2011 Wacker PT2A, Serial # 20018198, ID # X110300, 2” TrashPump ..............................................................................................$825 2011 Wacker PT2A, Serial # 20026979, ID # X110302, 2” TrashPump ..............................................................................................$825 2011 WACKER PT3A, Serial # 20027091, ID # X110297, 3” TrashPump................................................................................................$613

1900 BROWN BEAR BC283, Serial # BC283-011, ID # BRB01,Tree shredder for HF Skid steer.- 4.14 CI 36” wide motor 4200PSI ........................................................................................................$10,2221900 BROWN BEAR BC283, Serial # BC283-012, ID # BRB03,Tree shredder for HF Skid steer.- 4.14 CI 36” wide motor 4200PSI ........................................................................................................$10,2221900 BROWN BEAR BC283, Serial # BC283-013, ID # BRB06,Tree shredder for HF Skid steer.- 4.14 CI 36” wide motor 4200PSI ..........................................................................................................$10,22

GME TRENCH PROTECTI GMEBAR32, Serial # 240455, ID #240455, 32”“X50” Spreader set 4 GME Aluminum trench boxes 136LBS ..................................................................................................$307 2006 KUNDEL KUN4X10, Serial # 13571, ID # 270793, 4X10Stacking box -4X10 no knife - B Old style - 2000 LBS............$2,5562006 KUNDEL KUN4X10, Serial # 13594, ID # 270891, 4X10Stacking- no knife - 6” C Old style - 3400 LBS........................$2,5562006 KUNDEL KUN4X10, Serial # 13593, ID # 270792, 4X10TITAN 5 RAP-O-ROUND Stacker 6” C Old style - 3400 LBS ..$2,5562006 KUNDEL KUN4X10, Serial # 13595, ID # X01938, 4X10TITAN 5 RAP-O-ROUND Stacker 6” C Old style - 3400 LBS ..$2,5562007 KUNDEL KUN4X8, Serial # 13519, ID # X01944, 4X8 TITAN5 RAP-O-ROUND Stacker 6” - C STYLE ..................................$2,556

2001 RAMMAX P3324HHMR, Serial # 332303, ID # 210873, 597Hours, 33” Drum Trench Roller..................................................$1,227

2010 PARTNER/HUSQVARNA K970 CART, Serial #20102500043, ID # X100513, HUSQVARNA K970 Trolly cart withwater kit............................................................................................$153 2010 PARTNER/HUSQVARNA K970 CART, Serial #20102500028, ID # X100516, HUSQVARNA K970 TROLLY CART W/WATER KIT ......................................................................................$153

2005 Vermee r RT200, Serial # 1VRX081F751000692, ID #250375, 195 Hours, Walk Behind Trencher ..............................$5,000

CATERPILLAR MISC ITEMS, Serial # MS678WATERTANK, ID #MS678, B Series Water Tank..........................................................$460

1978 CATERPILLAR 769C WW, Serial # 001X00583, ID #UP12537, 4951 Hours, Truck, Cab, A/C, Rigid frame, Retarder, 8000Gal. water tank, Tires @ 4915HRS, RF 47%, LF 74%, Rears74% ..........................................................................................................$22,489

2010 CAT 930H, Serial # 0DHC01866, ID # 100161, 755 Hours,WHL, Erops, A/C, Standard front, Tires @ 755hrs avg 92%................................................................................................................$140,0002010 CATERPILLAR 924H, Serial # 0HXC01817, ID # 100579,3385 Hours, Whl Loader, Erops, A/C, Standard front, Wheel steering....................................................................................................$92,0002010 CATERPILLAR 930H, Serial # 0DHC01845, ID # 100440,464 Hours, Wheel Loader ......................................................$143,1112010 CATERPILLAR 930H, Serial # 0DHC02139, ID # 100580,1584 Hours, Wheel Loader, Erops, A/C, Quick coupler ......$127,7782010 CATERPILLAR 930H, Serial # 0DHC01764, ID # 100055,716 Hours, Whl Loader, Erops, A/C, Standard front, Wheel steering,Tires @ 687hrs 93%..............................................................$141,067

CATERPILLAR MISC ITEMS, Serial # 9900079, ID # C980758A6,D3C 30B Winch ..........................................................................$5,750

PAVING BREAKERS

RAKES

LIGHT PLANTS

MATERIAL HANDLING ARM

MISC ATTACHMENT

MOTOR GRADER

MULTI TERRAIN LOADERS

ROCK DRILLS

RIVET BUSTER

RIPPER

RIMS

RIDE ON TRENCHER

REMOTE ROLLER

PAVERS

PADDLE AERATORS

ONBOARD LEVELER

ROLLERS

SCRAPERS

SPREAD BARS

STUMP GRINDER

SWEEPS

SWIVEL BRACKETS

TAIL GATE

TELEHANDLERS

THUMBS

TRACKS

TRASH PUMPS

TREE SHREDDER

TIRES

SOIL CULTIVATOR

WINCH

WHEEL LOADERS

WATER TRUCK

WATER TANK

WALK BEHIND TRENCHER

TROLLY CARTS

TRENCH ROLLER

TRENCH BOXES

HAMMERS

IT BLANK

STACKING PLATES

STICKS

2002 NPK INC E205, SN# 72742, ID# A22037, E205 Hammerw/’C’Bracket, Hyd. Quick disconnects, no heads ..........................$3,067

2010 CAT CS323C, SN# 0DAR00466, ID# 090282, Roller, OROPS,Canopy, smooth drum, tires @ 215hrs 95-99%” 216 Hrs........$55,500






The Original MFG TB-Series & VZ-Series BreakersFormerly distributed by Teledyne & BTI

Always ask for Genuine “OEM” Parts

3900 Ben Hur Avenue, Willoughby, Ohio 44094

www.toku-america.com SALES • SERVICE • PARTS

A PREMIER HYDRAULIC BREAKER MANUFACTURER FOR OVER 33 YEARS

3 Year Warranty - 2 Moving Parts - No Accumulators 100-12,000 Ft/Lb Product Range

Call: 877-954-9923FOR DETAILS ON

FREE DEMO!

3 YEARWARRANTY

Wright Express Releases Monthly Construction FCI ResultsWright Express Corporation, a leading

global provider of value-based business pay-ment processing and information manage-ment solutions, in collaboration with IHS aleading global source of information andanalytics, Aug. 23 released results of itsWright Express Construction FuelConsumption Index (FCI), which indicatedan increase of 1.4 percent in July versus itslevel the previous year. The Wright Express Construction FCI

measures national fuel consumption statis-tics for the construction industry, which pro-vides an accurate and up-to-date indicationof construction activity in the United States. “The results of the July 2012 Fuel

Consumption Index indicate flat growth inthe construction industry despite consistentyear-over-year growth,” said RickPomerleau, vice president, corporate devel-opment at Wright Express. “The construc-tion industry hit a speed bump in June,showing the industry is still on a slow path torecovery.” Wright Express worked with IHS to cap-

ture and analyze transaction data from itsclosed loop network of more than 180,000fuel and vehicle maintenance locations,including more than 90 percent of thedomestic retail fuel locations and 45,000

vehicle maintenance locations. With thisdata, the Wright Express Construction FCIcan be used to identify emerging trendswithin the construction industry and thenational economy. The indicators were tested at monthly,

quarterly and annual frequencies, with thegreatest insights produced using the year-over-year percent change of the monthlydata. For July 2012, the Wright ExpressConstruction FCI reported that fuel con-sumption by U.S. construction companiesincreased by 1.4 percent versus July 2011and increased by 0.2 percent versus the pre-vious month. The Wright Express Construction FCI,

which is available monthly in advance of theU.S. Census Bureau figures on construction

spending, is available at http://www.wright-express.com/fci. Last month’s Wright Express

Construction FCI diverged from theincreased construction spending levels evi-dent in most of the government’s subsequentconstruction data releases. Constructionspending excluding improvements — agood measure of activity — expanded by 0.7percent in June. Private residential construc-tion increased by 3.1 percent, again reflect-ing the year’s uptick in single-family hous-ing starts. The decrease in June was reflect-ed in housing permits, which decreased 3.7percent in June to an annual rate of 755,000due to a sharp drop in multi-family permitsin the South. Total construction put-in-placeincreased by 0.4 percent in June.

IHS Analysis According to the IHS analysis, the contin-

ued flat growth for the Wright ExpressConstruction FCI in July, and with the addi-tional loss in June, indicates a delayed recov-ery for the construction industry. New homesales fell 8.4 percent in June; however, theloss should not be considered significant dueto an anomalous sales plunge in the north-east. Despite the uncharacteristic decrease inJune, the housing market remains on trackfor recovery with the three-month averageshowing new home sales gradually increas-ing. The key obstacle to the housing recovery

continues to be tight credit conditions, whichis why sales to non-investors have been onlyinching up in recent months, despite lowmortgage rates and plenty of affordablehomes (in most markets). The homeownervacancy rate measuring the proportion ofhomes that are vacant and for sale slipped2.1 percent in the second quarter of 2012,which is still too high from the “normal”range of 1.6 percent to 1.7 percent. Homeprices have been rising slowly in recentmonths and any gain in prices is good newsbecause the price gains reduce the number ofhomeowners with “underwater” mortgages.

The Wright Express Construction Fuel Consumption Index indicated an increase of 1.4 percent in July versus its level the previous year.


View Our Inventory atwww.haletrailer.com

New East Florida Spec Dumps, 24' x 96" x 60" tri-axle suspension, electric tarp

New East walking floors, 48' long x 102" x 13',spring suspension; Keith walking floor installed.

We Rent LowbedsWe Rent Walking Floors

ExcellentFinancingAvailable

NEW TALBERT & FONTAINE 5O & 55 TON LOWBOYS, Flat Level Deck & Raised Center, 25’ & 26’ DeckLengths, (2) King Pin Locations, Automatic 3rd Axle AirLifts, 275/70R 22.5, 3+1 Capability, In Stock!

New Landoll 440 & Trail King TK70SA, 50'x102", air ride suspension, 20K winch,

wireless remote, PSI system & dock levelers optional

New Etnyre 35 Ton & 55 Ton Paver Special Low Boys,

Air Ride Suspension, Tandem & Triaxle

New East Hardox Steel Dumps 34' x 96" x 66"SUPER HEAVY DUTY - Demolition Trailer, Air Ride, BarnDoor.

New Talbert 20 Ton tags, 21' deck, 6' beaver tail,17.5 wheels

NEW Fontaine Steel Flatbeds, 48’x102” SpringSliding Suspension Winches & Bulkhead Included

YOUR DEALER FOR HEAVY HAUL EQUIPMENTNEW 65-Ton Capacity Widespread Available: Talbert, Etnyre, Trail King

New Manac Steel Drop Deck Extendables 53’-71’x102” wide, 34” Deck Height, Tri-AxleSuspension, Air Lift

Talbert 35 Ton Lowboys22" Deck Height, Air Ride Suspension

Weight Laws are Changing!Heavy Haulers: we have the axles, jeeps, flip boxes and spreaders you need.

We RentLowboys, Blade

Trailers, Etc.

www.haletrailer.com

Concord, NC800-438-2250

Columbia, SC800-915-9900

Jacksonville, FL800-828-3055

New Fontaine Velocity Steel Drop Decks,48’x102”, Air Ride Spread Bulkhead and Winches

New Manac Hardox Steel Dumps, 40’x102”x100”,Single Point Susp, 87 Cu. Yds, Frameless and FrameType, Also Available w/76” Sides

New Fontaine & Talbert Dropside 55 & 60 Ton Lowboys,

26' Deck, 22.5 Wheels, Air-Ride/ Air Lift and Modular Available

New Fontaine Revolution H Composite Flatbeds48’x102”, Air Spread Suspension Aluminum Wheels,Winches, Also Available in a Drop Deck

8,990 LBS.

New Talbert and Etnyre 65 Ton Wide Spread Capable Lowboys

IN STOCK

IN STOCK


DEALER IMPRINT AREA

> > >

INTRODUCING A NEW E.P.I.C. GENERATION

EFFICIENT

POWERFUL

INTELLIGENT

COMFORTABLE

REAANT IDEALER IMPR

www.mayequip.com

Lexington, NC336-357-5005

Columbia, SC803-865-1002

Looking for Certified Used Equipment?Have Equipment You’d Like to Sell?

Contact:

As a Division of BRAMCO, along with Brandeis Machinery & Supply andPower Equipment, we’re backed by more than 100 years of experience serving construction and mining companies, municipalities and utilities contractors. We have a 30 year history as the authorized Komatsu dealerin Kentucky, Indiana and Tennessee.

We’re second to none in understanding the value of your machines andhave earned a reputation for fair dealings. Trust K.I.T. Equipment to helpwith your fleet reduction efforts.

Call John Noble Today: 502-493-42201801 Watterson Trail • Louisville, KY 40232

www.kitequipment.com

K.I.T. Equipment

EQUIPMENT RENTALS FORCONSTRUCTION & INDUSTRY

103 Bryan St.Jacksonville, FL 32202904-354-5746

600 N. Commonwealth Ave.Polk City, FL 33868863-984-6262

888-253-2444 • www.pinnaclecentral.biz

For the best in Doosan portable equipment give us a call.• Generators• Light Towers• Dehumidifiers• Oil-FreeCompressors

• Straight Mast Forklifts

• Shooting Boom Forklifts

• Portable Dust Collectors

• Diesel & Electric Compressors


www.spectra-is.com

You can supervise all your sites with

the Trimble® Connected Community.

All connected site data for site

positioning, grade control and asset

management available on one tool.

Share and synchronize data between

the o�ce, partners and supervisors

to create unprecedented e�ciencies on

the job site. And, with real-time

internet connectivity, Trimble Tablet is

the tool that puts you back in the

driver’s seat with control over your

connected sites. Stakes or no stakes.

It’s one more reason why the largest

and most successful construction

companies are partnering with Trimble.

Shouldn’t you?

WAT C H

Y O U R B U S I N E S S

G R O W. . .

“The main advantage of using thissystem has been the time savings...

we’ve saved around a month onthe contract overall.”

Kevin Primmer,

Kelston Sparkes Earth Moving

exchang

e data, photos and messages wit

th the office

imblet tre aind out morF

om.cytivitoduc-primble

t

he imble: TrT

uthorAechnology tion T Te onstrucChe

yituthor

tion Limitvigaimble NarTrtion Division © 2009 onstrucimble CrTr

C-092 (06/09)TTC-092 (06/09). edveserts righll r. Aedtion Limit

h

u

y


Light Compaction.Hefty Lineup.Bridge repair. Road maintenance.Asphalt. Whatever your application,there’s a Chicago Pneumatic compaction solution for you. From plate compactors and tampers to walk behind double drumrollers and Bluetooth radio-controlledtrench rollers, you can count on Chicago Pneumatic equipment for outstanding power and performance.

cpcompaction.com People. Passion. Performance.

Find a Chicago Pneumatic dealer near you at cp.com or contact us at 800-760-4049.

TRENCH ROLLERS > SOIL & ASPHALT PLATES > FORWARD & RESERVIBLE PLATES > TAMPERS > WALK BEHIND DRUM ROLLERS

CALL DOUG OR SAM

(866) 485-7180WWW.RBUSED.COM

Dave Parker (R), ASC Construction, lends a hand at the Touch-A-Truck event thattook place in Chattanooga, Tenn., early in September. The program was started in2003 with funds provided by the Tennessee Commission on Children and Youth toprovide unique activities that promote child/parent bonding. ASC Construction, aswell as other agencies and organizations, were on site to ensure a good time washad by all participants.

ASC HostsTouch-A-

Truck



It’s a mouthful to say — Sunshine State One Call ofFlorida, Inc. — and it’s even harder to remember. So, armedwith recent results of a brand identity study conducted bymarketing and communications agency MGH, Florida’sone-call center changed its name to Sunshine 811.“We created a 10-minute online survey,” Chris McMurry,

MGH senior vice president said. “It was sent to 15,137 e-mail addresses and completed by 413 people. The studyfocused on brand identity, brand name, brand perceptions,usage of the center and its services.”With a two-decade history in Florida and several names,

the study reflected what some already knew — brand con-fusion.“The study showed that most people remembered ‘sun-

shine’ in our name, but not the whole name,” Sunshine 811Executive Director Mark Sweet said. With “Sunshine” as the most consistent word mentioned,

MGH recommended the name Sunshine 811. The new namealso will be easier to remember because it’s shorter and uses811, which comes with substantial recognition frommomentum built by the national 811 campaign.Early on, there was some concern that using 811 in the

name could negatively impact Internet Ticket Entry usage. “We are pleased with an Internet Ticket Entry level of

more than 60 percent,” Sweet said. “Nobody wanted to seethat percentage decrease.”As a result, Sunshine811.com will be used interchange-

ably with Sunshine 811 as a dual marketing campaign —one that seeks to attract new users with the easy-to-remem-ber 811 phone number, and another that promotes the full-service damage prevention resources available to profes-sional excavators. “And there’s always that chance,” Sweet added, “that

we’ll attract new Internet users since the name no longeruses ‘call.’”Sunshine 811 currently is rebranding its communications

pieces and Web site.“Watch for more exciting things to come,” Sweet con-

cluded, “as we continue striving to make Florida the safestplace to dig.”

Florida’s One CallShortens Name toSunshine 811

EVERY MORNING MY HUMAN SHAVES OFF HIS FACE FUR, HE’S FUNNY LIKE THAT.

— TUCK adopted 05-04-11

Beard Equipment Company RentsOut Pink Tractor to Fight CancerBeard Equipment Company has come up with a novel

way to raise support for fighting cancer. Starting on Oct. 1and continuing for 12 months, Beard Equipment will rent aspecial pink tractor to customers, with all rental revenuegoing to USA Children’s & Women’s Hospital and the USAMitchell Cancer Institute.“While launching our wellness program we recognized

that employees, customers, relatives and friends have insome way been touched by cancer,” said Kristen BeardDeLaney of Beard Equipment. “We at Beard Equipmentwanted to make a contribution to the cancer research com-munity. “While exploring ways to contribute we realized that we

have two outstanding research facilities here in Mobile,” saidBrooke Beard Dodson of Beard Equipment. “USA’sMitchell Cancer Institute and USA Children’s & Women’sHospital seemed to be ideal organizations to help make a dif-ference.”The attention-getting pink tractor is actually a 22 ton (20

t) excavator, a construction tool for contractors for generalsite excavation, installation of pipe and utilities and landclearing. The pink paint is being donated by Tommy Englishof Automotive Paint Supply and PPG. Rental rates are $800daily, $2,000 weekly and $6,000 monthly. “We have hopes of raising between $60,000 and $70,000

for Children’s & Women’s and the Mitchell CancerInstitute,” DeLaney said. The tractor will be available to rentin Mobile and through Beard Equipment’s Florida locationsin Pensacola, Panama City, Freeport, Jacksonville, Lake Cityand Palatka. For more information about renting the pink tractor, con-

tact Beard Equipment Company in Mobile 1-855-GOB-EARD (462-3273).

About USA Children’s & Women’s HospitalUSA Children’s & Women’s Hospital is among fewer

than ten freestanding hospitals in the country dedicatedspecifically to the health care needs of children and women,

offering Mobile’s only neonatal and pediatric intensive careunits, pediatric oncology and sickle cell outpatient center andhigh-risk obstetrical care. With more than 2,700 births annu-ally, USA Children’s & Women’s Hospital is the area’sleader in deliveries.A major expansion that will nearly double the size of USA

Children’s & Women’s Hospital is scheduled to be complet-ed in 2013, recognizing the community’s validation of thehospital’s quality of care and the hospital’s opportunity tocontinue to meet the needs of a varied and growing popula-tion. For more information, visit www.usahealthsystem.com.

About the University of South Alabama Mitchell

Cancer Institute University of South Alabama’s Mitchell Cancer Institute

(MCI) is the only academic cancer research institute in theupper Gulf Coast region, and is the largest single researchendeavor in the history of the University of South Alabama.MCI offers cutting edge treatment and research under oneroof. The strong spirit of collaboration between clinical care,basic and translational research and the referring physician iswhat sets MCI apart. The interdisciplinary cancer teamworks together to develop life-saving treatments for cancerpatients.MCI’s vast research initiatives are a key component of its

commitment to provide the most advanced and most com-prehensive cancer care including the latest treatment tech-nology, CyberKnife Robotic Radiosurgery system and thecomfortable treatment environment of its infusion suite. Inaddition to improving cancer care, the Institute stimulates thegrowth of a strong regional economy built on biomedicineand biotechnology. Together with the entire USA HealthSystem, USAMCI focuses on discovery and development ofnew and more effective treatments for cancer. For more information, visit www.usamci.com.

Beard Equipment hopes to raise between $60,000 and $70,000 for USA Children’s & Women’s Hospital and theMitchell Cancer Institute.


Crawler and Rough Terrain Cranes

Crawler Cranes Rough Terrain Cranes

Uplifting

America FSANY Crawler and Rough

eatures Full Lines ofAmerica Fer TTerrain CranesCrawler and Rough

eatures Full Lines oferrain Cranes

Uplifting

Uplifting

Crawler CranesSCC8100SCC8150SCC8200

Crawler and Rough

Crawler Cranes Rough T Terrain SRC840SRC865SRC865XL

Craneserrain e

SRC865XL

UpliftingerformanceP

Upliftingerformance

erformance

SCC8300SCC8500

318 Cooper Circ 770-631-7731 | Email:ax: 678-251-2869 | Fel:TTel:

SRC885

GA 30269, eachtree City Ple,318 Cooper Circamerica.com | wwwy sales@san 770-631-7731 | Email:

GA 30269america.comy.sanamerica.com | www

PIRTEK Becomes Member ofAmerican Recyclers Association

Recently PIRTEK joined the AutomotiveRecyclers Association to generate awarenessabout the services offered by PIRTEK toscrap and recycling companies.

Established 1943, the AutomotiveRecyclers Association (ARA) has represent-ed its industry dedicated to the efficientremoval and reuse of automotive parts, andthe safe disposal of inoperable motor vehi-cles. The association services approximate-ly 1,000 member companies through directmembership and more than 2,000 othercompanies through its affiliated chapters.Suppliers of equipment and services to thisindustry complete ARA's membership.

PIRTEK understands the importance ofkeeping equipment and work crews up andrunning. When a hose fails, it can cost recy-cling businesses thousands of dollars in lostproductivity. That’s where PIRTEK can helpthe ARA members reduce the costs of equip-ment downtime, idle crews, labor and parts,fuel, overtime and lost opportunity associat-ed with hose failures.

PIRTEK will be exhibiting at the up andcoming Texas Automotive RecyclersAssociation (TARA) being held at theDouble Tree hotel in Austin Texas, from Oct.11 to 13. The PIRTEK booth, will have give-aways and vouchers.

Rockledge, Fla.-based PIRTEK offers a24 hour, 7 day service serving almost everyfacet of industry including construction,manufacturing, transportation, agricultureand engineering just to name a few. When anequipment breakdown occurs, it often resultsin costly delays in time and labor before theproper replacement hose is located andinstalled. PIRTEK vans carry the componentparts necessary to manufacture hose assem-blies onsite. Hose and fittings also can bepurchased over-the-counter at PIRTEK’sCenters which serve as home base to itsmobile fleet. There are more than 40PIRTEK Hose Service & Supply Centersnationwide and a fleet of more than 200servicing major metropolitan marketsthroughout the United States.


By Martin CrutsingerAP ECONOMICS WRITER

WASHINGTON (AP) U.S. construction spending fell inJuly from June by the largest amount in a year, weigheddown by a big drop in home improvement projects. But spending on construction of single-family homes and

apartments increased again, a hopeful sign for the modesthousing recovery. The Commerce Department said Sept. 4 that overall con-

struction spending declined 0.9 percent in July. It followedthree months of gains, which were driven by increases inhome and apartment construction. The June decline left spending at a seasonally adjusted

annual rate of $834.4 billion. That’s nearly 12 percent abovea 12-year low hit in February 2011. Construction activity isroughly half of what economists consider to be healthy. “In short, a weaker than expected report,” said Jim

O’Sullivan, chief U.S. economist at High FrequencyEconomics. Still, O’Sullivan noted that the data are extreme-ly volatile and the trend in residential spending “is clearlystill upward.” Spending on residential construction fell 1.6 percent in

July from June to a seasonally adjusted annual level of$264.6 billion. But that was dragged lower by a 5.5 percentdecline in home improvement projects. Spending on single-family homes rose 1.5 percent, the

fourth straight monthly gain. And spending on apartmentconstruction was up 2.8 percent, the ninth straight gain. Separately, CoreLogic, a private real estate data provide,

said U.S. home prices jumped 3.8 percent in the 12 monthsending in July. The year-over-year increase was the biggestin six years and the third national measure of home prices toshow steady gains. Rising prices and higher home sales have made builders

more confident in the housing market. A survey of buildersentiment rose in August to its highest level since the hous-ing market went bust five years ago. The gains in housinghave been fueled in part by record low levels for mortgagerates. The average rate for a 30-year fixed rate mortgage hasbeen below 4 percent all year. Still, the construction industry remains weak. Spending on nonresidential projects fell 0.9 percent to an

annual level of $294.1 billion. Spending on governmentprojects dropped 0.4 percent to a level of $275.7 billion.Spending on state and local building projects fell 0.3 percent,while spending on federal construction projects was down1.3 percent. Despite the modest gains in housing, the broader econo-

my weakened in the spring. Economic growth slowed to anannual rate of just 1.7 percent in the April-June quarter,down from a 2 percent rate in the first three months of theyear. Economists forecast growth will average 2 percent in the

second half of the year. That’s not enough to significantlylower the unemployment rate, which stood at 8.3 percent inJuly.

U.S. ConstructionSpending Fell 0.9Percent in July

SANY Builds World’s Largest, MostAdvanced ExcavatorFactory in ChinaSANY has opened the

world’s largest and mostadvanced excavator factorynear Shanghai, China, thatcan produce an excavatorevery five minutes, accord-ing to the manufacturer.The Lingang Industrial

Park has 10.7 million sq. ft.of total space, with 5.9 mil-lion sq. ft. of manufacturingspace. The facility cost$818.5 million to build. Thefactory uses a computerizedproduction-managementsystem for maximum effi-ciency, managing the entireprocess, from raw steel plateto structural welding, tocomponents and finalassembly. Excavator structures andcomponents are transported automati-cally from underground tunnels to opti-mize production. The factory will pri-marily produce excavators in the 20 to30-ton (18 to 27 t) size range.The facility is unique for its 43,000

sq. ft. of gardens, reflection pools, bam-boo stands and marble patios that flankthe assembly lines inside the facility.The gardens include palm trees, flow-ers, grass and fountains.“Our Lingang facility is the most

advanced, highest-capacity excavatorfactory in the world, and SANY pro-duces more excavators globally thanmost other equipment brands,” said TimFrank, chairman of SANY America Inc.“North American customers mightrightly ask, ‘What’s in it for me?’ It’ssimple: robust and reliable structures,cut and welded by precise, fully roboticsystems, assembled by a dedicatedteam.“Our excavator team is experienced

at producing almost as many excavators each year as aresold in the United States by all manufacturers combined,”Frank said. “Add to that robust base the fact that we haveU.S. assembly and component supply in our facility outsideof Atlanta. You get a great machine at a great price. This ispart of SANY’s culture of excellence in manufacturing effi-ciency, and our plan to become a global leader in excava-tors.”In addition to excavators produced in Lingang for sale in

China, SANY produces base excavator kits that are shippedto SANY America’s assembly facility in Peachtree City, Ga.The kits are assembled there, adding the options and fea-tures preferred by North American customers.SANY is a global leader in the manufacture and sale of

hoisting equipment (crawler, truck, rough-terrain and all-terrain cranes), concrete machines (concrete pumps, placing

booms, mixer trucks and batching plants), road machinery(motorgraders, rollers, pavers and asphalt batching plants),port equipment (container reach stackers, empty-containerhandlers, heavy forklifts and gantry cranes), excavators,mining equipment (rigid haul trucks, road headers, miningvehicles, longwall systems and continuous miners), pile-driving machinery and wind turbines.SANY America Inc. sells, distributes and supports

crawler cranes from 110 to 550 tons (99 to 499 t), rough-ter-rain cranes from 40 to 85 tons (36 to 77 t), hydraulic exca-vators from 7.5 to 33.5 tons, port reach stackers with maxi-mum lift of 99,200 lbs. (44,996 kg), and empty-containerhandlers with maximum load of 19,850 lbs. (9,000 kg).SANY America has an operations, assembly and researchand development center in Peachtree City, Georgia. For more information, visit www.sanyamerica.com.

SANY excavators await shipment from the factory in Lingang, China.

The new SANY excavator factory south of Shanghai, China, includesinnovative features such as tranquil fountains, flowers and palm trees.



SAVE TIME • SAVE MONEY • SAVE LABOR • SAVE OIL

• No tools required• No expensive

hardware needed• No more rags

stuffed into hoses• No more messy

plastic caps• The ultimate

contamination control tool• One hand installation• Eliminate hydraulic

oil spills & clean up• Quick installation

& ease of usage• Safe for personnel

& environment• Industy acclaimed• 100% Made in USA

For more information contact Mike Pearl at914.980.8890 or email mike @ flangelock.comwww.flangelock.com

ARTBA Annual Student Video Contest Winners Announced

A group of 18 high school students fromNorth Carolina and three graduate and post-graduate students from New England werenamed winners of the American Road andTransportation Builders Association’s(ARTBA) annual “Student Video Contest”on Sept. 10.

Sponsored by ARTBA’s Research andEducation Division (RED), the contest chal-lenges grade school and post-secondary stu-dents to develop a brief video that exploresissues relating to America’s transportationnetwork. Students were asked to addresshow transportation infra-structure is built and paid for,the impacts of traffic conges-tion, transportation andurban development plansand public perception oftransportation development.

Submissions werereviewed by a panel of fiveARTBA members. The win-ning entries were shownSept. 13 during the ARTBANational Convention inMemphis.

Category One —Elementary, Middle orHigh School Students:

“How to SolveCongestion”

Members of the 2012Summer High SchoolTransportation Institute atNorth Carolina A&T StateUniversity

Eighteen high school students participat-ing in North Carolina A&T StateUniversity’s 2012 “Summer High SchoolTransportation Institute” and led by ProgramManager Deborah Underwood, created anentertaining and upbeat, two-and-halfminute video which provided a simple, yetcompelling description of the mobility chal-lenges facing drivers on the nation’s road-ways. It offered real-world solutions forrelieving congestion, such as high occupan-cy toll lanes, traffic updates via text messageand accelerated bridge construction. Thegroup presented the information using multi-modal visuals and interviews with studentactors. Category Two — Post-Secondary,

College or Graduate Students:“Modernizing Transportation

Technology” David Champoux, graduate student in

transportation engineering, University ofMassachusetts-Amherst; Joseph Smith,

undergraduate in media communica-tions, University of Southern Maine; andAdrian Wong-Ken, undergraduate inmedia communications, University ofSouthern Maine.

One graduate student and two college stu-dents from New England created an inform-ative, three-and-half minute video thatlooked at the congestion caused by outdatedtraffic signal systems, and presented someinnovative ways to make commutes moreefficient by integrating existing technologyinto transportation frameworks. The team

interviewed a transportation engineer andpublic official in the technology-focusedvideo, and profiled specific projects in whichthe new traffic signal technology was imple-mented.

Honorable Mention in CategoryTwo — Post-Secondary, College

or Graduate Students:“Paying Our Way”Jamesa Marshall, graduate student in

civil engineering, University ofWisconsin-Madison

Marshall created an illustrated videowhich provided an in-depth but straightfor-ward description of an alternative financingpilot project conducted by the OregonDepartment of Transportation, in which 299motorists volunteered to pay what is called avehicle miles traveled tax, or “VMT” ratherthan a gas tax at the pump. It addressed thebenefits and challenges to nation-wideimplementation of such a program using cre-ative drawings and narration.

Sponsored by ARTBA’sResearch and EducationDivision (RED), the contestchallenges grade school andpost-secondary students todevelop a brief video thatexplores issues relating toAmerica’s transportationnetwork.


Nissan Forklift Names Winners of Service Excellence AwardsNissan Forklift Corporation announced the winners of its Service

Excellence Program (SEP) Awards for the past year. The SEP isdesigned to reward and recognize those Nissan Forklift dealers whohave achieved the highest standards of aftermarket service.Nissan Forklift’s SEP was established in 1995. Its ongoing

mission is to provide a comprehensive program for its dealerservice network that is based on implementation of best-in-class principles covering technical and customer servicepractices. Through SEP, Nissan Forklift recognizes thosedealers who cultivate an environment for delivering a trulyexceptional customer experience, and ultimately achieve acompetitive advantage in the markets they serve.Nissan Forklift dealerships that participate in the service

excellence program meet standards across seven main cat-egories including business planning, employee compe-tence and customer satisfaction. The standards in each arearesult in Nissan Forklift dealerships that provide more effi-cient work order processing and billing, well-trained and cer-tified technicians as well as overall quality products and servic-es for their customers.Those dealers who excel across the categories are rewarded for

their efforts by achieving one of the program’s threelevels of awards: gold, silver and bronze.

Service Excellence Award Winners 2011

Gold level award winners are:• Equipment Depot in Mechanicsburg, Pa.• J.M. Equipment Inc. in Manteca, Calif.• New England Industrial Truck Inc. in Woburn,

Mass.

• Nissan Forklift of Michigan in Grand Rapids, Mich.• M & L Industries in Metairie, La.

Silver level award winners are:• Adobe Equipment LLC in Houston, Texas• Buffalo Materials Handling in Buffalo, N.Y.• Handling Systems in Phoenix, Ariz.• J.H. Ryder Machinery Ltd. in Mississauga, Ontario• J.M. Equipment Inc. in Sacramento, Calif.• J.V. Equipment in Edinburg, Texas• Liftec in S. Plainfield, N.J.• Lift Solutions in Omaha, Neb.Bronze level award winners are:• A.F. Enterprise in Shreveport, La.• A.F. Enterprise in Longview, Texas• G.W. Van Keppel Company in Kansas City, Kan.• LPM in Bethany, Okla.“Congratulations to our service excellence award winners,”

said Dan Domberg, director, customer quality and satisfaction,Nissan Forklift. “The team effort and priority that these dealers have

given to achieving total customer satisfaction make them very deservingof this acknowledgement.”

About Nissan Forklift CorporationNissan Forklift Corporation designs, manufactures and supports a complete line of

material handling equipment that delivers features resulting in greater dependability,higher productivity and lower operational costs. Headquartered in Marengo, Ill., NissanForklift has a network of more than 100 authorized dealerships with over 225 locationsacross North, South and Latin America, as well as additional worldwide locations. For more information, call 815/568-0061 or visit www.nissanforklift.com.

Nissan Forklift dealer-ships that participate in the serviceexcellence program meet standardsacross seven main categories includ-ing business planning, employee com-petence and customer satisfaction.


‘Lady Crane, ’ Colleagues Close One Door, Open Another

By Jennifer HetrickEDITORIAL ASSISTANT

As of August 31, Nancy C. Caralla, coined“Lady Crane,” has officially closed the doors onGulf Crane & Equipment, the company her fatherhad founded in 1971 and which she had ownedand operated since her father’s death in 2004. It was not without a sense of sadness and fond

memories that the decision was made to retire thefamily owned business and Caralla stated, “Thetime had arrived to completely move forwardwhile keeping the solid foundation poured by myfather, and carrying forth the business morals,dignity and integrity which Gulf Crane &Equipment was built upon.”That is not to say that Caralla is out of the crane

industry. After all, this is a woman who once saidshe had “cranes in her blood,” and Caralla will bethe first to tell you that if you need a crane, craneadvice, a crane operator, crane anything, she willcertainly be available to help you out throughGulf Winds Renewable-Construction (GWR-C),the company Caralla founded in September 2011.GWR-C is an international company specializingin renewable energy construction projects andheadquartered in New Port Richey, Fla., withsatellite offices located in Durham, N.C., andGenoa, Italy. Now Caralla, seeing increased interest and

necessity in wind energy safety, has partneredwith professional wind industry associates andformed the NationalWind Technician Organization to give the grow-ing number of professional wind technicians theirown venue in which to find products, servicesand safety education tailored to their professionalneeds.The National Wind Technician Organization is able to

provide safety training services for all personnel involved inthe process of building, maintaining, operating, and manag-ing wind turbines and wind sites.Scott Battles, National Wind Technician Organization’s

northwest and midwest operations manager stated, “Myfather was an OSHA compliance officer. I did not realize thathaving him hammer safety into my head when I was youngwould be such a strong focus later in my life.” Battles also is a professional wind technician and wind

industry educator, who carries a “great interest in and passionfor the safety of the wind industry professionals.” In his roleas educator, Battles follows his father’s lead, preaching safe-ty to his students every day.

Battles has certifications from FCC licenses to G.E. 1.5wind turbines to Microwave which have been a surprisinglygood mix of knowledge bases. A solid and unique background in communication elec-

tronics, railway, wind turbines and wind farm constructionenables Battles to provide professionals and students withfirst-hand knowledge, along with practical experience whendiscussing various aspects of products, service, and safetytopics. At the opposite side of the country Matthew Soto serves

as National Wind Technician Organization’s southwest oper-ations manager.“We are certified to train individuals in the use of the

Skylotec Milan rescue and evacuation devices. We can trainyou and your employees in harness inspection, basic rescue

techniques and evacuation techniques all at yoursite or location. Membership to the NationalWind Technician Organization will entitle mem-bers to a discount on equipment, for example,harnesses, rescue devices, etc.”Soto has been in the wind industry for more

than six years and comes to the National WindTechnician Organization with experience inoperations and maintenance, commissioning,site construction, large corrective, recruitment,technical and safety training. Recently, Soto hasbeen focusing on the safety aspect of trainingentry-level wind technicians in the use of fallprotection and working at heights training andhas spent a year-and-a-half as a technical instruc-tor and safety trainer. Soto is certified in the fol-lowing areas: • Miller Fall Protection Competent Person• Skylotec Competent Person (Milan A-024

and A-020)• Siemens Level 2 Basic Harness Instructor• Siemens Safety and Rescue Instructor, Basic

Rescue and basic Evacuation • ICM Personal Fall Protection Equipment

Product KnowledgeAdditional members of the National Wind

Technician Organization team are:Nancy C. Caralla, East Coast & International

operations managerMike Kyes, ITT administratorPaul Bosworth, UK division administratorTony DelMonaco, organization photographerNational Wind Technician Organization is

preparing to open individual memberships forprofessional wind technicians, wind industryeducators, wind industry safety professionalsand construction professionals worldwide.Memberships are expected to be available in

September, featuring the National WindTechnician Organization “Turbine Card,” filledwith tailored discounts from well-known nation-wide vendors, franchises and companies only forNational Wind Technician Organization mem-bers and handpicked by the organization. A fewof our membership partners offering their tai-lored discounts are: La Quinta Inns & Suites,1800flowers.com and Enterprise Rent-A-Car. The “Turbine Card” will be offered at the low

one-year membership fee of $50.00.Students will be offered a twenty-five percent

discount off the yearly membership fee: $37.50. Student IDrequired.Caralla has long proclaimed, “We’re ALL In It Together!”

and the professionals in the wind industry are no exception. For more information, visit www.nationalwindtech.orgE-mail: [email protected] Wind Technician Organization Facebook page:

https://www.facebook.com/nationalwind.technicianorgani-zationAnd follow them on Twitter: @NationalWindTecNational Wind Technician OrganizationSt. Petersburg, Fla. 33708 (919) 201-1512.(This story also can be found on Construction

Equipment Guide’s Web site at www.constructionequip-mentguide.com.) CEG

Photo courtesy of Tony DelMonacoThe National Wind TechnicianOrganization gives the growingnumber of professional windtechnicians their own venue inwhich to find products, servicesand safety education tailored totheir professional needs.


YOU DON’T HAVE TO DIG REAL DEEP......TO DIG REAL DEEP

You don’t have to have real deep pockets to invest in a LiuGong. LiuGong hydraulic excavators are

designed and built to compete value-wise, both in the showroom and out on your next job.

With lower ownership and operating costs, you’ll be able to break out of your costly earthmoving routine and make some money with a LiuGong.

From a mini-excavator for your next landscaping job to a full-sized machine for

some major pipeline chores, check one out at your LiuGong dealer today.

LiuGongNA.com281-579-8882

LiuGong is a � fty-plus-year-old construction equipment manufacturer with a huge range of products for the North American quarry, construction, recycling, timber, landscaping, utility and other markets – WHEEL LOADERS. HYDRAULIC EXCAVATORS. BACKHOE-LOADERS. SKID-STEER LOADERS. SOIL COMPACTORS. LiuGong is the only equipment manufacturer to receive the coveted National Quality Award of China and are ISO9001 and ISO14001 certi� ed. Truly a top-shelf, world-class organization.

SELECT DEALER TERRITORIES AVAILABLE

OPERATING WEIGHTS TO 81,600 POUNDS BUCKET CAPACITIES TO 2.5 CUBIC YARDS DIGGING FORCES UP TO 48,559 POUNDS

YANMAR & CUMMINS ENGINES UP TO 260 HORSEPOWER DIESEL ENGINES

DUMPING HEIGHTS TO 24’4” DIGGING DEPTHS TO 24’1”


Precast Prison Cell Modules Fabricated Off Project Sitetion with a close security designation.“Rotondo Weirich provided the precast

prison cell modules for the Bledsoe project,”explained Bill Franklin, Rotondo Weirichbusiness development director. “We special-ize in precast prison cells and perform thiswork at or near the project site.”The Lederach, Pa.-based company mobi-

lizes its equipment and personnel and estab-lishes a local casting facility for each projectperformed. The only PCI certified precastmanufacturer in the country that mobilizesits operation to the project site, RotondoWeirich established a casting facility nomore than a few miles from the Bledsoeprison site to form an assembly line processto cast the modules and install the interiorfurnishings and equipment. “This pre-fabricated approach takes the

manufacturing of the prison cells off the crit-ical path of construction,” said Franklin.“We began the set-up of our casting facilityin late spring/early summer of 2010. Webegan casting prison cells in July 2010 andcompleted the casting in November of thesame year.”According to Franklin, “Prefabricated

precast prison cells depend on early deci-sions and approvals from the project owner.Rotondo Weirich mobilizes all of our equip-ment to the project site including our steelforms to cast the modules. For the Bledsoeproject we mobilized three quad forms. Eachform is capable of casting a cell module con-taining four prison cells. The forms producea module approximately 30 ft. long and 20ft. wide. We also mobilized a Rubber TireGantry Crane with 70-ton capacity at themanufacturing facility, as well as a 300-toncrawler crane to erect the modules into posi-tion on the project site.”Crews used local ready mix concrete and

welded wire mesh reinforcement to cast themodules. All specialty detention equipmentis cast in and installed to complete the mod-ules. This included hollow metal doors andframes, light fixtures, plumbing fixtures,detention furniture and all windows andglazing.The new facility’s cost-saving features

include spacious windows and a series ofskylights. In addition to five housing units,the prison will reportedly feature buildingsfor security, administration, visitation, infir-mary, cafeteria and work programs. According to numbers released by the

TDOC, the total capacity once expansion iscomplete will be 2,400 beds. There will be981 existing beds and 1,444 new beds. Theestimated cost of overall construction isapproximately $208 million. By utilizingexisting administrative staff, operationalcosts at the facility are expected to be signif-

icantly lower than if thedepartment had built a stand-alone facility. Experiencedstaff also are expected toensure a stable transition anddependable workforce as theprison becomes operational. Upgrades will be made to

regional water and electricalsystems, according to the TDOC, which offi-cials say will benefit not only the prison, butalso the local community. A sophisticatedgeo- thermal heating system will serve theentire prison. The system uses 580 wells tocirculate air underground where the temper-ature is 55 to 58 degrees. This reduces thecost of additional heating or cooling. Mid-State Construction Co. Inc. was con-

tracted to install the geothermal heatexchange field and related distribution pip-ing.“This is the largest geothermal heat-

ing/cooling system installed to date in thestate of Tennessee,” explained Jason Gentryof Mid-State’s geothermaldivision.“Geothermal heating and coolingsystems are an energy-efficient alternativefor the heating and cooling of residential,commercial and institutional applications.The more moderate and constant tempera-tures of the earth used by the geothermal sys-tem as a heat sink/source are advantageous,when compared to the outdoor air used byair-source heat pump systems. Geothermalheating and cooling systems use the naturalproperties of the earth and natural heat trans-fer to provide heating and cooling to build-ings.”Mid-State drilled the first geothermal bore

in July 2010 with work substan-tially complete by October 2011.“One of the biggest chal-

lenges was the fact that almostall of the lateral excavationwould be in rock,” said Gentry.“To alleviate some of the rockexcavation in the geothermalheat exchange field, the decisionwas made to rock trench the lat-eral ditches before drillingoccurred to expedite the excava-tions after the drilling was com-pleted. There was more than15,000 lineal ft. (4,572 m) of 16-

in. HDPE distribution piping that needed tobe installed. The pipe weighed 30 lbs/foot.This pipe is heat fusion welded, whichrequired 9,000 welds and with its weight ittook a great deal of coordination to install.Also, with 580 bores at 500 ft. deep each todrill the coordination of up to five drill rigs ata time was a challenge.“This is the backbone of a vertical geot-

hermal heat and cooling system. The loadthat can be handled by a geothermal systemis dependent upon the overall bore footagedrilled for the ground heat exchanger,”Gentry concluded.The drills used to make the 500 ft. bores

were T-4 Ingersoll Rand down the hole ham-mer drills. The 16 in. HDPE pipe wasfusion-welded, using a McElroy 618TracStar Fusion Welder. Materials included585,800 ft. of one-and-one-quarter inch DR-9 HDPE pipe for the geothermal heatexchanger loops, 5,000 ft. of 16 in. DR-11HDPE pipe for distribution piping, morethan 654,000 ft. of HDPE pipe was installedfor the geothermal heat exchanger and distri-bution piping.The general contractor of the project is

Flintco LLC, Memphis, Tenn..Subcontractors included E. Cornell MaloneCorporation of Jackson, Miss., which com-

pleted the prison’s roof insulation, mem-brane and related metal trim and flashings.Work began in September 2010.“This project carried through the winter

months, which made it virtually impossibleto roof,” explained E. Cornell Malone, con-tract administrator, Shannon Sumrall.“Projecting up to this time and prioritizingthe buildings was a necessity to keep othertrades busy and maintain the project sched-ule. There were 16 buildings composed ofconcrete, wood and steel decks. Though allhave a two-ply SBS system, assemblieswere different for each deck type. Stayingorganized and focused was a must.”

Sumrall said 50-ft. (15 m)reach forklifts were used forloading materials to roof areas.More than 640,000 sq. ft.(59,458 sq m) of roof mem-branes were needed. The roofsystem is composed of mini-mum R-21.7 insulation valueswith a reflective SopraStar Capsheet manufactured by Soprema. The Bledsoe County prison

will house mostly medium-secu-rity prisoners. One of the mostinteresting designs involved apair of tunnels that serve as thesole entrance and exit for theprison. The tunnels, going underfences, reportedly connect to themain prison without interruptinga perimeter road around the

structure. Employees, visitors and prisonersentering or exiting the site will pass throughthe central control area’s prison staff.Bledsoe is one of only two prisons in thestate that have incorporated such a system sofar.Once the prison is ready to officially open

its doors early next year, the inmates will bemostly state prisoners now housed in countyjails in different regions of the state.Although most will be medium security,there will be a housing unit for prisonersclassified higher than medium security and aunit to house minimum-security inmates.Considered one of the state’s largest ongo-

ing construction projects, the BledsoeCounty prison is being built on 2,200 acresof the Cumberland Plateau. Officials withthe Tennessee Department of Correctionssay the additional jobs created by the expan-sion will help to put residents of BledsoeCounty to work. They also report that thenew facility should be completed byNovember 2012, with the prison expected toreceive its first inmates beginning in Januaryof 2013.

This story also can be found onConstruction Equipment Guide’s Web siteat www.constructionequipmentguide.com.)CEG

Photo courtesy of Rotondo WeirichRotondo Weirich usessteel forms to cast themodules. For the Bledsoeproject the company mobi-lized three quad forms.Each form is capable ofcasting a cell module con-taining four prison cells.

COMPLEX from page 1

Photo courtesy of Jason Gentry of Mid-State Construction Bore field supply return piping and valving in the geothermalpump room of the prison, shown here.




NEXT DAY PARTSFrom Komatsu - The Parts Experts

Everywhere in North AmericaIf you’re operating Komatsu equipment in North America, you have the peace of mindthat comes from 99% next-day parts availability. Your distributor and Komatsu’snetwork of regional Parts Distribution Centers ensures you have access to the partsyou need when you need them most.

From coast to coast, and everywhere in between, Komatsu’s staff of trained experts is standing by 24/7 to help with the right parts to keep you up and running.

www.komatsuamerica.com

NEXT DFr

NEXT Dom Komatsu - The Parts ExpertsFr

Y PAAY PNEXT Dom Komatsu - The Parts Experts

STAR P PARom Komatsu - The Parts Experts

S

.komatsuamerica.comwww.komatsuamerica.com

RISH EQUIPMENT COMPANYwww.rish.com

Bluefield, WV • 304/327-5124Chesapeake, VA • 757/485-2100

Chester, VA • 804/748-6411Coeburn, VA • 276/395-6901

Opal, VA • 540/439-0668Salem, VA • 540/380-2090

Staunton, VA • 540/887-8291

POWER EQUIPMENTwww.powerequipco.com

Knoxville, TN • 865/577-5563LaVergne, TN • 615/213-0900

Chattanooga, TN • 423/894-1870Kingsport, TN • 423/349-6111Memphis, TN • 901/346-9800Saltillo, MS • 662/869-0283

LINDER INDUSTRIALMACHINERY

www.linderco.com

www.facebook.com/linderindustrialmachinery

FloridaFt. Myers • 239/337-1313

Jacksonville • 904/786-6710Ocala • 352/629-7585

Orlando • 407/849-6560Pembroke Pines • 954/433-2800

Plant City • 813/754-2727West Palm Beach • 561/863-0570

North CarolinaAsheville • 828/681-5172Charlotte • 704/376-7554Greenville • 252/695-6200High Point • 336/665-0110Raleigh • 919/851-2030

Wilmington • 910/254-2031

South CarolinaColumbia • 803/794-6150

Greer • 864/877-8962North Charleston • 843/552-0095

TRACTOR & EQUIPMENTCOMPANY

www.tractor-equipment.com

AlabamaAlabaster • 205/621-2489Anniston • 256/831-2440

Birmingham • 205/591-2131Decatur • 256/355-0305Dothan • 334/678-1832Mobile • 251/457-8991

Montgomery • 334/288-6580Shoals Area • 256/383-5666Tuscaloosa • 205/752-0621

FloridaPanama City • 850/763-4654Pensacola • 850/505-0550

GeorgiaAlbany • 229/435-0982Atlanta • 404-366-0693Augusta • 706/798-7777Calhoun • 706/879-6200

Columbus • 706/562-1801Hoschton • 706/654-9850Kennesaw • 678/354-5533

Macon • 478/745-6891Savannah • 912/330-7500

find us on



www.ascvolvo.com

CORPORATE704-494-8100

GEORGIABuford

678-318-9500Savannah

912-964-8079Forest Park770-319-0074

NORTH CAROLINAAsheville

828-687-0620Charlotte

704-596-8283Greenville

252-754-5280Raleigh

919-661-8710

SOUTH CAROLINACharleston843-414-1120Columbia

803-791-0740Piedmont

864-704-1060

TENNESSEEChattanooga423-308-7940Knoxville

865-525-1845

VOLVO LOADING ZONE.LET’S WORK.There’s strength in numbers. Breakout force, bucket capacity, daily productivity, fuel efficiency and a wide range of loaders and options - ASC ConstructionEquipment has the Volvo equipment you can count on. Volvo does the heavy lifting. So you have the capacity for more jobs and bigger profits.Let’s work. Visit your local ASC dealer today.

The Rental Show Returns to Las Vegas in ’13In Las Vegas, it’s all about

increasing your odds — and thesame holds true for The RentalShow, which will be held there nextFeb. 10 to 13. Every aspect of theAmerican Rental Association’s57th annual convention and rentaltrade show is designed with onething in mind: helping attendeesmake more money.The Rental Show moves to a

new venue for 2013, The SandsExpo and Convention Center,which is located in the center of thefamous Las Vegas Strip. And whilethe new site provides new opportu-nities for dining and entertainment,the core factor of helping attendeesbe profitable remains the same.“The Rental Show is right on the

money for rental success,” saidAllison Box, ARA senior adminis-trative director of association serv-ices. “We’re using ‘right on themoney’ as the tagline for TheRental Show 2013 because it’s true— this is the show for people seri-ous about profit. All elements of the

show, from new rental products tofresh educational ideas from theseminars and relationships thatdevelop in connecting with otherrental business owners and suppli-ers, are designed to focus on mak-ing attendees more profitable.”Highlights of the 2013 schedule

include: • A full day of 16 seminars on

Sunday, Feb. 10, with topics thatrange from industry updates to TierIV engines and healthcare to beingprofitable in the new economy.Financial sessions with SteveAbercrombie also are on the agen-da, as well as Internet marketingwith David McBee. In addition, therental town hall seminars return onFeb. 12. There also will be a new“Wednesday Wake-Up” session onFeb. 13 with Lt. Col. Rob “Waldo”Waldman.• The keynote session featuring

Captain Mark Kelly, who will sharehis story of courage and hope —from his space shuttle missions tohis wife Gabrielle Giffords’ recov-

ery from a January 2011 assassina-tion attempt. His keynote addresswill touch on what he’s learnedfrom his experiences including theimportance of leadership and team-work. The keynote session is spon-sored by Ditch Witch.• Three days of trade show, Feb.

11 to 13, with the latest rentalequipment for construction/indus-trial, general tool/homeowner andparty/special event businesses.• New events including “A Night

in Fabulous Las Vegas” at Harrah’sLas Vegas, which will transport youback to the Rat Pack’s vintageVegas days, and the new ARAYoung Professionals Networkreception at FIRST Food and Barthat’s for rental professionalsbetween the ages of 18 and 40 andtheir parents. • Other popular networking

events will return, such as LunchWith ARA, regional receptions, theinternational reception and theReception With a Purpose featuringthe ARA Foundation charity auc-

tion.• Events & Tents will have a new

full-day schedule on Feb. 9 and willinclude a Fabric Fashion Show thatmorning and a lunch session withwedding designer Sasha Souza, inaddition to 16 seminars specificallyfor those in party/special eventrental. A special reception will closeout Events & Tents at KeepMemory Alive, a Frank Gehry-designed venue that supports theCleveland Clinic’s Lou RuvoCenter for Brain Health.Registration for The Rental

Show opened Sept. 5, on the show’sWeb site, TheRentalShow.com. Aspecial Internet-only registrationrate of $119 per person for ARAmembers is available for a limitedtime. This rate is for full registra-tion, which includes the seminarson Feb. 10, 12 and 13; the keynotesession on Feb. 11; and the tradeshow Feb. 11 to 13.For more information, call

800/334-2177 or visitwww.TheRentalShow.com.

I’VE NEVER UNDERSTOOD WHY MY HUMAN WON’T LEAVE THE HOUSE WITHOUT HER LEASH. I THINK SHE’S AFRAlD OF GETTING LOST. BUT IT’S OK, I KIND OF LIKE SHOWING HER AROUND.

— HARPER adopted 08-18-09



MAXIMIZE EFFICIENCY. MINIMIZE COSTS.LET’S WORK.Volvo Construction Equipment offers equipment that’s ideal for quarry work. Our wheel loaders feature our exclusiveOptiShift technology for exceptional fuel efficiency, while our articulated haulers are designed for quick transport of aggregates.With the support of over 300 dealer locations across North America, the result is greater productivity for your crew – and ahigher earning potential for you.

Learn more about OptiShift by contacting a Volvo dealer near you. Visit volvoce.com/na today.

9601 BOGGY CREEKORLANDO, FL 407-659-8700

407-659-8720 (FAX)DAVIE

954-581-4744JACKSONVILLE904-737-6000

ORLANDO407-850-9614

TAMPA813-630-0077

FT. MYERS239-481-8554

FLORIDACOWIN

EQUIPMENT CO.,INC.

7950 PITTMAN AVE.PENSACOLA, FL

32534800-239-4736850-479-3004

CHESAPEAKE757-485-3314RICHMOND

804-266-0000ROANOKE

540-989-3750

WISE276-328-8027

MANASSAS, VA703-393-7344

WINCHESTER, VA540-722-3700

BIRMINGHAM800-239-2694

MOBILE800-223-6755MONTGOMERY800-239-6642

MADISON256-350-0006HUNTSVILLE800-239-7368

OXFORD800-917-7931

GEORGIAASC

CONSTRUCTIONEQUIPMENTSAVANNAH

912-964-8079BUFORD

678-318-9500FOREST PARK 770-319-0074

SOUTH CAROLINAASC

CONSTRUCTIONEQUIPMENTCOLUMBIA

803-791-0740PIEDMONT

864-704-1060NORTH

CHARLESTON843-414-1120

NORTH CAROLINAASC

CONSTRUCTIONEQUIPMENTASHEVILLE

828-687-0620CHARLOTTE

704-596-8283RALEIGH

919-661-8710GREENVILLE252-754-5280

TENNESSEEASC

CONSTRUCTIONEQUIPMENT

CHATTANOOGA423-308-7940KNOXVILLE

865-525-1845

FLORIDAFLAGLER CONSTRUCTION EQUIPMENT LLC

WWW.FLAGLERCE.COM

VIRGINIAMCCLUNG-LOGAN EQUIPMENT

COMPANY

ALABAMACOWIN EQUIPMENT CO., INC.


Allis-Chalmers Orange HD21 Dozer/Ripper, 1:50 Scale $75

Allis-Chalmers Forest Green HD21 Dozer/Ripper, 1:50

Scale ....................................................................................$75

Allis-Chalmers Yellow HD21 Dozer/Ripper, 1:50 Scale..$75

Allis-Chalmers HD-41 Dozer, 1:25 Scale ....................$200

Bantam C-35 Crawler Backhoe, 1:50 Scale ..................$60

Bantam C-35 Crawler Shovel, 1:50 Scale ....................$70

Bantam Shovel Mounted on a White Truck, 1:50 Scale $75

Bobcat E35 Compact Excavator, 1:25 Scale ................$50

Bobcat M400 Gold 50th Anniversary Skid Steer Loader,

1:25 Scale ........................................................................$35

Bobcat M610 Golden 50th Anniversary Skid Steer

Loader..............................................................................$25

Bobcat S175 Skid Steer Loader, 1:25 Scale ................$40

Bobcat S205 Skid Steer Loader & Pick-Up Truck/Trailer

Set, 1:50 Scale ................................................................$60

Bobcat 773 50th Anniversary Skid Steer Loader, 1:25

Scale ................................................................................$25

Bobcat M200 Gold Skid Steer Loader, 1:25 Scale ......$25

Bobcat 2008 Road Tour Semi Tractor/Trailer, 1:64 Scale ..

..........................................................................................$25

Case CX210B Excavator, 1:50 Scale ............................$40

Case 330B Articulated Truck, 1:50 Scale......................$40

Case 1850K Dozer, 1:50 Scale ......................................$40

Caterpillar AP600D Paver, w/ or w/out Canopy, 1:50 Scale ..

..........................................................................................$50

Caterpillar AP655D Paver, 1:50 Scale ..........................$50

Caterpillar D4E Track-Type Tractor, NZG, 1:50 Scale ..$80

Caterpillar D7E Track-Type Tractor, 1:50 Scale............$85

Caterpillar 140H Motor Grader, 1:50 Scale ..................$60

Caterpillar 297C Multi-Terrain Loader, 1:32 Scale........$45

Caterpillar 308C CR Mini-Excavator, 1:50 Scale ..........$50

Caterpillar 365B Excavator, 1:50 Scale ........................$70

Caterpillar 365C Front Shovel, 1:50 Scale ..................$110

Caterpillar 416 Backhoe/Loader, 1:32 Scale ................$75

Caterpillar 432E Backhoe/Loader, 1:50 Scale ..............$70

Caterpillar 906H Compact Wheel Loader, 1:50 Scale ..$45

Caterpillar 977 Traxcavator, 1:50 Scale ........................$55

Caterpillar 980G Wheel Loader, 1:50 Scale ..................$50

Caterpillar Military 924H Versalink Loader in Desert

Camouflage, 1:50 Scale ..................................................$45

Caterpillar Military 120M Motor Grader in Desert

Camouflage, 1:50 Scale ..................................................$70

Doosan Moxy MT31 Articulated Truck........................$115

Euclid R32 Off-Highway Truck, 1:50 Scale ..................$35

Hamm GRW280 Compactor w/Cabin ............................$75

Hamm 3307 Compact Roller, 1:34 Scale ......................$45

Hitachi EH700 Off-Highway Truck, 1:50 Scale..............$35

International "S" Series Dump Truck,1:25 Scale ......$125

International TD-15 Dozer, 1:50 Scale ..........................$60

International TD-20E Dozer, 1:64 Scale ........................$24

International 175 Crawler Loader w/Multi-Purpose

Bucket, 1:50 Scale ..........................................................$60

International TD-24 Military Dozer, 1:50 Scale ............$45

JCB 456 ZX Wheel Loader, 1:50 Scale ..........................$50

JCB 525-58 Compact Loader, 1:35 scale ......................$35

John Deere 200C LC Excavator ....................................$40

John Deere 624K Military Wheel Loader, 1:50 Scale ..$35

John Deere 872 GP Motor Grader, 1:50 Scale..............$50

Komatsu D51 PX Dozer, 1:50 Scale ..............................$65

Komatsu D375 Dozer, 1:50 Scale ..................................$90

Komatsu HD605 Off-Highway Truck, 1:50 Scale ..........$80

Komatsu HM250 Articulated Truck, 1:50 Scale ............$70

Komatsu PC14R Mini-Excavator, 1:32 Scale ................$40

Komatsu PC350LC Excavator, 1:50 Scale ....................$90

Komatsu PC2000-8 Front Shovel, 1:50 Scale ............$200

Komatsu SK1020 Skid Steer Loader, 1:25 Scale ........$35

Komatsu SK1026 Skid Steer Loader, 1:25 Scale ........$35

Komatsu WA470 Wheel Loader, 1:50 Scale..................$60

Komatsu WA500 Wheel Loader, 1:50 Scale..................$90

Komatsu WB146 Backhoe/Loader, 1:50 scale..............$60

Komatsu 475A-5EO Dozer, 1:50 Scale ........................$125

Kubota KX121-3 Compact Excavator, 1:24 scale ........$50

LeTourneau Military Super C Scraper, 1:50 Scale ......$35

Liebherr TA230 Articulated Truck, 1:50 scale ............$130

Link-Belt 800 X2 Excavator,1:50 Scale........................$240

Link-Belt 80100 Rough Terrain Crane ........................$190

Mack Granite MP Dump Truck w/ Beavertail Trailer, 1:50

scale................................................................................$110

Mack Granite MP w/ Bottom Dump Trailer ..................$85

New Holland 555 Skid Steer Loader, 1:25 scale ..........$30

Northwest 25-D Shovel, 1:50 Scale ..............................$85

Peterbilt 367 Dump Truck w/ Beavertail Trailer, 1:50 Scale

........................................................................................$120

Terex RC45 Rough Terrain Crane, 1:50 Scale ............$180

Vogele Vision 5200-2 Paver, 1:50 Scale ......................$140

Volvo A25D Articulated Truck, 1:50 Scale ....................$60

Volvo L70E Wheel Loader w/Attachments, 1:50 Scale$95

Volvo SD-122 Soil Compactor, 1:72 scale ....................$25

Volvo 6870 Wheeled Asphalt Paver, 1:50 Scale ..........$70

All New in Box

CALL Toll Free

800-523-2200Ext. 197

Collections Wanted, I Buy Collections Shipping and Handling Included

Contact – Barry McKeon800-523-2200 Ext. 197 • 610-506-5961 Cell

Email – [email protected]

CEG Scale Models470 Maryland Drive

Fort Washington, PA 19034Visit our Ebay Store – bmckeon collectibles – for a complete list with pictures.

John Deere

400D

Articulated

Truck,

1:50 Scale$40

John Deere

624K

Wheel

Loader,

1:50 Scale$45

John Deere 850J

Military Dozer,

1:50 Scale $50


www.hyundaiamericas.com

Industry’s Best Total Coverage Warranty: 3-year / 3,000-hour full machine warranty & 5-year / 10,000-hour structural warranty

H

Y U N D A

I

W

AR R A N

TY

VALUECash is king – Make more money & spend less with Hyundai 9 Series machines.• More Standard Features

• Industry-Best Total Coverage Warranty

• Hi-mate Remote Management service – FREE for 3 years

• Industry-Leading Fuel Economy

• Industry-Leading Cycle Times

ALABAMAPittman tractor

co. inc.

Daphne, AL251/621-3555

ARKANSASEQUiPmEnt rESoUrcE

manaGEmEnt inc.

North Little Rock, AR501/223-8604

GrovE rivEr

Richmond Hill, GA912/756-7854

naSSEr HEavY EQUiPmEnt

Lawrenceville, GA770/995-6663

Cumming, GA770/889-5004

Villa Rica, GA678/941-1100

MISSISSIPPImiD SoUtH

macHinErY

Gulfport, MS228/867-1555

Jackson, MS601/948-6740

Tupelo, MS662/690-6553

TENNESSEEDiamonD

EQUiPmEnt

La Vergne, TN615/641-1100

GEORGIA


Page 44 • October 3, 2012 • www.constructionequipmentguide.com • Mini & Compact Equipment Section • Construction Equipment Guide

ALABAMA

ARKANSAS

FLORIDA

GEORGIA

TENNESSEE

LOUISIANA

MISSISSIPPI

©2012 CNH America LLC. All rights reserved. Case is a registered trademark of CNH America LLC. www.casece.com

CASE AUTHORIZED DEALERS

(256) 832-5053Oxford(334) 262-6642Montgomery(256) 350-0006Madison(205) 841-6666Birmingham

Cowin Equipment Company(251) 380-7800Mobile

1 Source Power & EquipmentALABAMA

CASE AUTHORIZED DEALERS

(256) 832-5053(334) 262-6642(256) 350-0006(205) 841-6666

Cowin Equipment Company(251) 380-7800

1 Source Power & Equipment

La VergneDiamond EquipmentLouisvilleJohnson CityContractors MachineryMillingtonAbby Equipment TENNESSEE

(615) 641-1100Diamond Equipment

(865) 982-6452(423) 975-9111

Contractors Machinery(901) 840-1200

Abby Equipment TENNESSEE

(479) 751-4242Springdale(501) 455-5955Mabelvale(479) 648-1600Fort Smith

Scott Equipment Company(870) 741-8900Harrison

Potter Equipment Company(870) 932-8383Jonesboro

Heartland EquipmentARKANSAS

(256) 832-5053

(479) 751-4242(501) 455-5955(479) 648-1600

Scott Equipment Company(870) 741-8900

Potter Equipment Company(870) 932-8383

(256) 832-5053

Baton RougeCrawler Supply CompanySulphurBroussardCLM Equipment CompanyLOUISIANA

JacksonLiles BrothersLa Vergne

(225) 357-7515Crawler Supply Company

(337) 625-5942(337) 837-6694

CLM Equipment CompanyLOUISIANA

(731) 423-1637Liles Brothers

(615) 641-1100

(561) 296-9710West Palm Beach(813) 621-5811Tampa(407) 888-0024Orlando(305) 821-2273Hialeah Gardens(239) 690-0661Fort Myers

Trekker TractorFLORIDA

(870) 772-0204Texarkana(479) 751-4242Springdale

(561) 296-9710(813) 621-5811(407) 888-0024(305) 821-2273(239) 690-0661

(870) 772-0204(479) 751-4242

MISSISSIPPI

ShreveportMonroeAlexandriaScott EquipmentHoumaM & L IndustriesSt. RoseLee Tractor Company

MISSISSIPPI

(318) 226-9696(318) 387-4160(318) 448-1647

Scott Equipment(985) 876-2280

M & L Industries(504) 467-6794

Lee Tractor Company

Vaughters Tractor Company(770) 684-7277Rockmart

Haney Farm & Ranch(478) 956-3833Byron

Central Georgia Equipment(912) 748-2828Pooler(770) 322-6960Conley(706) 737-9191Augusta

Border EquipmentGEORGIA

Vaughters Tractor Company(770) 684-7277

(478) 956-3833Central Georgia Equipment

(912) 748-2828(770) 322-6960(706) 737-9191

Lee Tractor CompanyJacksonJWH EquipmentBruceBatesvilleHood EquipmentLelandAyres - Delta ImplementWalnutSaltillo Abby Equipment

Lee Tractor Company(601) 974-8090

JWH Equipment(662) 983-7181(662) 563-4546

Hood Equipment(662) 686-2361

Ayres - Delta Implement(662) 223-5347(662) 869-2432

Abby Equipment

(229) 219-7641ValdostaEquipmentWallace Truck &

(770) 536-1455GainesvilleVaughters Tractor Company

(229) 219-7641Equipment

(770) 536-1455Vaughters Tractor Company

ClarksdaleStringer’s InternationalBiloxiLee Tractor Company

(662) 624 4305

Stringer’s International(228) 392-9922

Lee Tractor Company

devreses rthgil rl. ACLa LciremH AN2 C102©

ww. wCLa LciremH ANf Ck oramedard teretsiges a re isa. C

moc.ecesac.w

Construction Equipment Guide • Mini & Compact Equipment Section • www.constructionequipmentguide.com • October 3, 2012 • Page 45

NORTH CAROLINA

SOUTH CAROLINA

VIRGINIA

(803) 658-0200ColumbiaHills MachinerySOUTH CAROLINA

(252) 752-7145GreenvilleHills MachineryNORTH CAROLINA

(803) 658-0200

SOUTH CAROLINA

(252) 752-7145

NORTH CAROLINA

(540) 662-8266Clear Brook

Vernon E. Stup Company(540) 942-2610Waynesboro(540) 966-0151Cloverdale(804) 752-8333Ashland

Lawrence EquipmentVIRGINIA

(843) 225-9377North Charleston

(540) 662-8266

Vernon E. Stup Company(540) 942-2610(540) 966-0151(804) 752-8333

(843) 225-9377

Ditch Witch, Charles Machine WorksUnveil RT80 Quad Ride-On TrencherThe Ditch Witch RT80 Quad is a

heavy-duty ride-on trencher andvibratory plow designed to providethe power, durability, stability andtraction contractors need for bothshort and long utility installations.The RT80 Quad is completely

designed and manufactured by TheCharles Machine Works (CMW) toprovide traction and performance onrough and uneven terrain. With itspower and compact footprint, theRT80 Quad can handle any type ofutility installation, short or long drops,on either tight or wide-open job sites,according to the manufacturer.The 83-hp (62 kW) RT80 Quad

features a three-speed, shift-on-the-flyground drive that provides the powernecessary to tackle any job site withthe machine’s vibratory plow, travers-ing trencher, saw or backhoe attach-ments.Equipped with a heavy-duty under-

carriage and components, the RT80 Quad is ideal forinstalling utilities in some of the toughest job site conditions.Its axle capacity offers static load rating of 39,000 lb. (17,690kg) and a 30,742 lb. (13,944 kg) of breakout. The machine’strack frames pivot about the centerline of the axle, a designthat provides enhanced machine stability especially inmuddy conditions or when applying very high torque to pullthrough hard ground. And the chevron-pattern design of theRT80 Quad’s track system helps reduce mud buildup, result-ing in improved traction in wet conditions and on slopes,according to the manufacturer. The heavy-duty nature of RT80 Quad extends to its

attachments and other working parts. The heavy-duty H810centerline trencher is capable of trenching up to 24 in. (61cm) wide. The RT80 Quad’s backfill blade arm helps pro-vide maximum lift and features the same heavy-duty designas the Ditch Witch RT115 Quad, for strength and durability.Other standard features of the RT80 Quad include rear

steering, which helps improve maneuverability on tight jobsites, and cruise control, which enables the operator to main-tain optimal digging performance regardless of ground con-ditions.For more information, call 800/654-6481 or visit

www.ditchwitch.com.

The Ditch Witch RT80 Quad is a heavy-duty ride-on trencher and vibrato-ry plow for both short and long utility installations.

The 83-hp (62 kW) RT80 Quad features a three-speed, shift-on-the-fly ground drive that provides the powernecessary to tackle any job site with the machine’s vibratory plow, traversing trencher, saw or backhoeattachments.


Tramac by Montabert Debuts FourNew Plate Compactor/Driver ModelsTramac by Montabert

released four new plate com-pactor/driver models toexpand the Tramac productline and make compact soilstrenches, seawalls, slopesand foundations a quick, safeand efficient process.Featuring a flat top mount

design, the Tramac platecompactors can easily bemounted to different carriersup to 100,000 lbs. The flat-top design allows a bracketcap to be added to the attach-ment based on the specificmachine being used. Fouroutboard shock mounts dis-tribute vibrations evenlywhile keeping the attach-ment level, improving com-paction efficiency andextending component life. Astandard flow control valveand pressure relieve valveprevent over-speeding,which can lead to poor com-paction and reduce bearinglife.Applications for the plate

compactor attachmentsinclude compacting trench-es, gravel or asphalt; foot-ings slab areas and slopes.The plate compactor also isvery efficient for seawalls,sheet pile and posts driving.An excavator-mounted platecompactor attachment pro-vides more powerful com-paction force than hand-operated compactors andreduces the need for workersin the trench. The plate com-pactor operating systemcombines maximum eccentric weight with the exact propor-tions of amplitude and vibration frequency necessary to gen-erate the most effective centrifugal force, according to themanufacturer.Stephane Giroudon, brand manager stated, “We are very

excited about the release of the new Tramac by Montabertcompactor line. This is a completely new and innovativedesign that includes a flow control and a pressure relievevalve. It does not require a case drain for an easy installationon any excavators and backhoe loaders. The addition lendsus the opportunity to display our company’s capabilities, toyet again, marry innovation and design while simultaneous-ly upholding the legacy of delivering a reliable and qualityproduct to our extensive network of dealers.” The PCT 34 is approved for carrier weight ranging from

5,512 to 14,330 lbs. (2,500 to 6,500 kg). The attachment’s

dynamic force is 3,400 lbs. and the compaction frequency is2,100 vibrations per minute (vpm).The PCT64 is approved for carrier weight ranging from

9,920 to 33,070 lbs. (4,500 to 15,000 kg). The attachment’sdynamic force is 6,400 lbs. and the compaction frequency is2,000 vibrations per minute (vpm). The PCT114 is approved for carrier weight ranging from

15,870 to 55,115 lbs. (7,198 to 25,000 kg). The attachment’sdynamic force is 11,350 lbs. and the compaction frequencyis 2,000 vibrations per minute (vpm). The PCT220 is approved for carrier weight ranging from

54,000 to 143,300 lbs. (25,000 to 65,000 kg). The attach-ment’s dynamic force is 22,000 lbs. and the compaction fre-quency is 2,100 vibrations per minute (vpm). For more information, visit

www.tramacbymontabert.com.

Featuring a flat top mount design, the Tramac plate compactors can easily bemounted to different carriers up to 100,000 lbs.



ALABAMABobcat of Mobile

Mobile

lylemachinery.com

Bobcat of OxfordOxford

256-831-1870bobcatofoxford.com

Bobcat of the WiregrassDothan

334-792-5121bobcatofthewiregrass.com

FLORIDABobcat of Central Florida

Tampa Bay

Orlando407-273-7383cfbobcat.com

Bobcat of Fort MyersFort Myers

239-334-4987

Naples239-530-0406

bobcat.wej-fl.com

Bobcat of Metro DadeHialeah Gardens

bobcatofmetrodade.com

Bobcat of JacksonvilleJacksonville904-288-9181bobcatjax.com

Bobcat of Palm BeachWest Palm Beach

Pompano Beach954-763-9880

bobcat.sbequipment.com

Novia Industries LLCOcala, FL

352-789-6818noviaindustries.com

GEORGIABobcat of Atlanta

Atlanta770-242-6500

Marietta770-850-1443

bobcatofatlanta.com

Bobcat of SavannahBloomingdale

seequipinc.com

Bobcat of ThomasvilleThomasville229-225-9644

bobcatofthewiregrass.com

Rhinehart Equipment CompanyRome

706-232-8962 bobcat.rhinehartequipment.com

MISSISSIPPIBobcat of Gulfport

Saucier228-832-7575

lylemachinery.com

NORTH CAROLINABobcat of Charlotte

Charlotte704-343-2200rsbraswell.com

Triangle Equipment Co.Morrisville

Garner

Wilmington

ncbobcat.com

SOUTH CAROLINABobcat of Greenville

Piedmont

Charleston

Columbia

Spartanburg

seequipinc.com

Triangle Equipment Co.Myrtle Beach

ncbobcat.com

Bobcat® and the Bobcat logo are registered trademarks of Bobcat Company in the United States and various other countries. ©2012 Bobcat Company. All Rights Reserved. | 0912603

ON

CHBOBCATATT

ONE F T OF THES

HECK OUT TH COMPAPACT TSE AUTHORI

HE LINEUP OTRACK LOADIZED BOBCATA

P OFDERS AT ATATT DT DEALERS.

52

cboBmelyl

cboBAL

078-1138-65dorfxO

drofxf Ot oacomc.yrenihcam

lebioMelibof Mt oac

AMAABAL

a,lacOsudnIa ivoNipmuqesb.tacbob

3674-59onmpaoP

lm Bat PsWea Pf otcabBo

L Fa,CLs Leirtsmoc.tneipm

8098-3hcae Bo

hcaelm Bch Beamla

eillvsirroMpmeiuqEelgnairT

mocll.ewsarsbr002-2343-407

ettlorahColr Chaf otcabBoIOLRCAHTRON

. Cotn

ettoANI

Tt oacboB

F

otacbob33

t oacboBcbob

ya BmpaaTaidrolFl artnef Ct o

AIDROLF

moc.ssargrewiehtfo1215-9274-3

anhtoDssargerie Whf tt o

mocd.orfxofotac

tlaafotacbob0-580-77ieraM2-24077

anltAf At oacboBRGOEG

tsudinaiovn978-523a,lacO

mco.atntla34410-

attie0056-2

atanatnaltf A

AIRG

moc.seirt8186-9

L Fa,

tnodmiePvneerGf t oacboBILORACH TUOS

mo.ctacbobcn

notginmliW

renarG

ellivANI

tcabBobob32

392FacboBfbc04

edaDort Mef otmoc-fl.jew.tacb

0640-0359-3seplaN

7894-43-339sreyt MroF

sreyt MroFf t oamoct.acbofb3873-732-70

ondalOr

23260mRopmeiuqEtrhaenihRwiehtfotacbob

522-922samohThf Tt oacboBnipiuqees

nimoolB Sf otcabBo

62892em

ynpam Cotnpmemoc.ssargre

4469-5eillvs

ellivsamohmo.ccn

elgdanhnanava S

hcaee BltryMpmeiuqEelgnairT

mo.ccnipiuqees

grubantrapS

aiblumoC

on tselrahC

. Cotnm

ob09aJtcabBotacbob

aHi

moc.xjaatcbo1891-828-40eillvnoskca

ellivnosck Jaf omco.edarodtemfo

snedra Gahle

nihcamelyl238-822ciuaSf otacobBSISSIM

etraheinhr.tacbob232-607

omc.yren7575-2

ercitorpfluG

IPPISS

moc.tneipmuqe6289-2

mo.ctacbobcn

seirtnuor cehts ouoirad vnagot lacboe Bhd tn® atacboB

306219. | 0devreses Rthgil Rl. Aynapmot Cacbo2 B102. ©

etatd Setine Uhn ty inapmot Cacbof Bs okramedard teretsigee rro ag

se


ONE VS MANYCOMPACT TRACK LOADERS FACE OFF

Scan the code. Watch the videos. See compact track loaders go head to head.

Visit BobcatAdvantage.com/CTLfaceoff15 to see more and find out who comes out on top.

www.BobcatAdvantage.com/CTLfaceoff15


Large in stock inventoryBackhoe conversions also available

Soft Ride Solid Tires For

Skid Steers and Wheel LoadersExtra deep lugs for tractionTough rubber compounding

www.advancetires.com • (800) 445-6647M e n t i o n t h i s a d f o r d i s c o u n t e d s h i p p i n g

Due to a number of recent enhance-ments, JCB’s 8055 RTS mini-excavatornow combines even more power andmaneuverability into one compact pack-age. The 8055 RTS weighs in at 12,125lbs. (5,500 kg), improving its lift capacityup to 10 percent and enabling operators tocomplete jobs in less time. A new 44.4 hp(33 kW) Perkins engine decreases fuelconsumption up to 10 percent, reducingoperating costs. In addition to the 8055’sstandard 75 in. (190.5 cm) dipper andoptional 59 in. (150 cm) dipper, a thirddipper — the 68 in. (173 cm) — is nowavailable. This new dipper increases themachine’s stability when using tiltingbuckets and quick hitches, according tothe manufacturer.

The 8055 RTS continues to offerimpressive break-out forces and high lev-

els of tractive effort and trackingspeeds. A dump height of 13 ft. 6 in.(4 m) and dig depth of 12 ft. 4 in. (3.7m) make the 8055 RTS more versa-tile on the job site. Single-actingauxiliary pipework to the dipperpowers breaker attachments,while optional double-actingpipework lets users switchbetween single and double.Straight-line tracking gives pre-cise control when positioning theexcavator next to obstacles orduring loading and unloading,but also allows safe travelwithout veering off when aservice is operated.

For more information,call 912/447-2000 orvisit www.jcbna.com.

The 8055 RTS weighs in at 12,125 lbs.(5,500 kg), improving its lift capacityup to 10 percent and enabling opera-

tors to complete jobs in less time.

JCB’s New 8055 RTS Adds More Power, Maneuverability


AlabamaCOWIN EQUIPMENT CO. Birmingham (205) 841-6666Huntsville (256) 350-0006Mobile (251) 633-4020Montgomery (334) 262-6642Oxford (256) 832-5053

ArkansasTHE G.W. VAN KEPPEL CO. Little Rock (501) 945-4594 Van Buren (479) 474-5281

FloridaCOWIN EQUIPMENT CO. Pensacola (850) 479-3004

GS EQUIPMENT Davie/Ft. Lauderdale (954) 327-8808Ft. Myers (239) 334-6063Jacksonville (904) 268-4400Orlando (407) 859-9160Tampa (813) 248-4971

GeorgiaCOWIN EQUIPMENT CO. Mableton (404) 696-7210

Louisiana CLM EQUIPMENT CO., INC. Broussard (337) 837-6693Sulphur (337) 625-5942

HEAVY MACHINES, INC. Shreveport (318) 621-0854

QUEST CONSTRUCTION EQUIPMENT Gonzales (225) 450-6425Lake Charles (337) 436-7726St. Rose (504) 467-7663

North CarolinaCCS EQUIPMENT SALESYoungsville (919) 556-9110

MAY HEAVY-EQUIP RENTALS & SALES Lexington (866) 629-3784

South CarolinaMAY HEAVY-EQUIP RENTALS & SALESColumbia (888) 865-1002

TennesseeCUMBERLAND TRACTOR & EQUIP, LLCNashville (615) 865-7800

FINLEY LLC a DIV of HMI, INC. Gray (423) 282-5462

HEAVY MACHINES, INC. Memphis (901) 260-2200

Virginia ELLIOTT & FRANTZ, INC. Manassas (703) 257-2381

LINK-BELT MID ATLANTIC Ashland (804) 798-2290Chesapeake (757) 485-4485

Puerto Rico PUERTO RICO WIRE PRODUCTS, INC. San Juan (787) 288-8080


BIG RESULTS.

www

.jcbna.comwwww.jcbna.com

VISIT THE JCB DEAL

LER NEAREST OU Y YOU

MacKinnon JCB2230 N US Hwy 301Tampa, FL 33619813-621-4671

1915 N Orange Blossom TrOrlando, FL 32804877-205-6098

6907 Broadway AveJacksonville, FL 32254877-218-56382755 Marshall DrTifton, GA 31793877-462-3250www.mackinnonjcb.com

JCB of Alabama8920 Weaver AveLeeds, AL 35094866-480-6125

791 Anderson RdMontgomery, AL 36110866-954-6522

www.jcbofalabama.com

Valley JCB(a division of Valley Supply & Equipment)

8192 Euclid CtManassis Park, VA 20111703-330-5579

www.valleyjcb.com

JCB of Nashville618 N Main StGoodlettsville, TN 37072615-851-4345

181 Industrial BlvdLaVergne, TN 37086615-793-8100

www.tuffequipco.com

JCB of Chattanooga1609 Church RdChattanooga, TN 37421423-899-1219

www.jcbofchattanooga.com

JCB of South Florida(a division of Florida Coast Equipment)

9775 W Boynton Beach BlvdBoynton Beach, FL 33437561-369-0414

15900 Westpark LnFort Pierce, FL 34945772-461-1003

www.jcbofsouthflorida.com

JCB of Georgia1008 E Hwy 80Pooler, GA 31322888-431-0130

2679 Barrett Lakes BlvdKennesaw, GA 30144678-594-5400

4008 Mike Padgett HwyAugusta, GA 30906888-431-0130

www.jcbofgeorgia.com


COMPACT MACHINES.

THE JCB RANGE OF COMP

skid steer and tracked loader with side entry is the safest most productive machine on the work site.

Whatever your application requires, JCB has the model to get the job done. The revolutionary JCB

EQUIPMENTCAAC NGE OF COMP PA



T EQUIPMEN





/JCB

.jcbna.com or the dealer nearest you to learn more!Visit www w.jcbna.com or the dealer nearest you to learn more!

environment, perfect for tight spaces.

The JCB range of zero tail-swing mini excavators provide a spacious, comfortable operator

HAMERICAT/JCBNOR/JCBNA

.jcbna.com or the dealer nearest you to learn more!

environment, perfect for tight spaces.


HAMERICA

.jcbna.com or the dealer nearest you to learn more!


’s The JCB range of zero tail-swing mini excavators provide a spacious, comfortable operator


H&E EquipmentServiceswww.he-equipment.comARLittle Rock501-568-7867800-632-0577Springdale479-927-1672888-200-6343LAAlexandria318-443-7173800-249-8485 Baton Rouge225-356-6113800-872-1305 Bossier City318-746-5272800-643-2844 Broussard337-837-9600877-463-9914 Gonzales225-644-2328888-450-0723 Kenner504-467-5906800-203-1869 Sulphur337-528-2661800-258-1614

Linder IndustrialMachinerywww.linderco.comFLFt. Myers239-337-1313Jacksonville904-786-6710Ocala352-629-7585Orlando407-849-6560Pembroke Pines954-433-2800Plant City813-754-2727West Palm Beach561-863-0570NCAsheville828-681-5172Charlotte704-376-7554Greenville252-695-6200High Point336-665-0110Raleigh919-851-2030

Wilmington910-254-2031SCColumbia803-794-6150Greer864-877-8962North Charleston843-552-0095

Lyle Machinery Co.www.lylemachinery.comMSColumbus662-243-2152Hattiesburg601-296-7556Jackson601-939-4000Magnolia601-783-2111Saucier228-832-7575

Power Equipmentwww.powerequipco.comMSSaltillo662-869-0283TNChattanooga423-894-1870Kingsport423-349-6111Knoxville865-577-5563LaVergne615-213-0900Memphis901-346-9800

Every Komatsu Tier 4 Interim construction machine comes standard with Komatsu CARE complimentary factory scheduled maintenance for 2,000 hours or the first 3 years, plus 2 complimentary KDPF exchanges. With Komatsu CARE you can:

• Lower your cost of ownership• Increase equipment uptime and reliability• Protect the value of your Tier 4 capital investment

It’s just part of our Program designed to deliver complete service and support solutions to Komatsu customers.

To learn more about Komatsu CARE

contact your Komatsu distributor or scan

this QR code with your smart phone.

GO WITH KOMATSU... AND GET THE ONLY

TIER 4 INTERIM EQUIPMENT WITH

COMPLIMENTARY MAINTENANCE BUILT RIGHT IN.

SOUTHEAST KOMATSU DISTRIBUTORS

T M

s

W

8

8

8

H

W

8

8

W

8

B M

P

2

I

F

8

A

8

O

E55 Features ‘Finger-Tip’ Control forBoom Swing, Auxiliary Hydraulics

The E55 conventional tail swingcompact excavator has an operatingweight of 12,478 lbs. (5,660 kg), anoverall width of 77.2 in. (196 cm) andis powered by a 48.8 hp (36 kW) tur-bocharged diesel engine that is interimTier IV compliant. The unit’s 13.4 in.(34 cm) of tail overhang helps it deliv-er increased lift capacity and slew per-formance in the most demandingapplications. The E55 is standard equipped with

a TOPS/ROPS certified cab, includingfull climate control (HVAC), and adeluxe high-back cloth suspensionseat with retractable seat belt.Additional amenities in the “radioready” cab include 12V power port,adjustable armrests, lockable toolboxand a convenient beverage holder. Within the operator’s area, the E55

features convenient “finger-tip” con-trol for boom swing and auxiliaryhydraulics functions. Large travelpedals fold up to provide more floorspace while flush-mounted floor matsmake cleanup easier. A keyless startsystem that discourages theft and van-dalism is available as an option.The E55 comes with an auto-idle

feature which, if activated by the oper-ator, automatically returns the engine

to idle if excavator functions are notused for a period of four seconds, sav-ing fuel and reducing job site noise.The engine automatically returns tothe preset throttle position as soon asthe operator starts working again. Forprecise engine speed adjustments, anew easy-to-use rotary knob has beenadded to the controls.As with all other M-Series compact

excavators, a load-sensing pistonpump and closed center valve systemprovide precise control of themachines travel and work-group func-tions. The E55’s hydraulic systemdelivers “loaded” cycle times and a9,442 ft.-lb. of bucket breakout forcefor productivity. Work-group cylin-ders offer end-of-stroke cushioningfor smooth operation.An automatic, integrated slew

brake holds loads still and steady onslopes for more accurate placement.The need for the operator to manuallyengage the slew brakes during trans-port is eliminated, making it easier toload and position the machine fortransport. Like all Bobcat M-Series compact

excavators, the E55 features an X-frame undercarriage that providesimpressive ground clearance and read-

ily sheds debris for reduced cleanuptime. Drive motor covers are insetwithin the motor wrap-arounds to pro-tect them from potential damage.Integrated into the undercarriage, con-venient tie down points simplify trail-er loading for transport, according tothe manufacturer.In addition, Bobcat’s in-track swing

frame keeps the swing castings andcylinders within the width of thetracks when digging in an offset posi-tion, helping the operator dig flushagainst an obstacle. This feature mini-mizes the chance of inadvertent con-tact with surrounding obstacles, ulti-mately reducing operating costs ofrepair to the machine or adjacentstructure. Other popular options for the E55

include “pad-ready” steel tracks, rub-ber street pads, a hydraulic angleblade, second auxiliary hydraulics,hydraulic clamp and hydraulic X-Change attachment mounting systemsfor quickly switching between the 16attachments approved for use on themachine.For more information, visit

www.bobcat.com/excavators/.

The E55 has an operating weight of 12,478 lbs. (5,660kg), an overall width of 77.2 in. (196 cm) and is pow-ered by a 48.8 hp (36 kW) turbocharged dieselengine that is interim Tier IV compliant.


COMPACTEXCAVATORS

Three track options for any terrain: rubber, steel and roadliner

Boom offset allows digging parallel to foundations or fences

Spacious and comfortable contour cab design for true tight-tail versatility

KOMTRAX wireless equipment-monitoring system with no monthly fees

The Komatsu PC88MR-8 takes the power and quality reputation of its larger siblings into tight places. The advanced Pilot Proportional Control (PPC) joysticks provide smooth, precise controls and five working modes enable you to take command of every project.

www.komatsuamerica.com

From Komatsu - The Compact Experts

.komatsuamerica.comwww

.komatsuamerica.com

Rish Equipment Companywww.rish.comMDFrostburg301-689-2211VABealton540-439-0668Chesapeake757-485-2100Chester804-748-6411Coeburn276-395-6901 Opal540-439-0668Salem540-380-2090Staunton540-887-8291WVBeckley304-255-4111Bluefield304-327-5124Bridgeport304-842-3511Logan304-752-9313St. Albaus304-755-3311

Tractor & EquipmentCompanywww.tractor-equipment.comALAlabaster205-621-2489Anniston256-831-2440Birmingham205-591-2131Decatur256-355-0305800-321-6865Dothan334-678-1832Mobile251-457-8991800-233-7213Montgomery334-288-6580800-832-9563Shoals Area256-383-5666Tuscaloosa 205-752-0621FLPanama City850-763-4654Pensacola 850-505-0550GAAlbany229-435-0982800-733-0962Atlanta404-366-0693Augusta706-798-7777800-659-3090Calhoun706-879-6200800-827-3072Columbus706-562-1801877-307-6439Hoschton706-654-9850888-334-9850Kennesaw678-354-5533Macon478-745-6891Savannah912-330-7500800-827-1405

T M

H

.komatsuamerica.com/komatsu-carwww

e .komatsuamerica.com/komatsu-car


TRACK INSTALLATION KIT

Install RubberTracks Fast & Easy

With Hydraulic Tools,Fits Most All CAT,

ASV / TEREX CompactLoaders

Replacement/RebuildableAxle Assemblies

SUPER HUB 2

• Grease Filled, Not Oil• Used with OEM or Bair’s Alloy Wheels

• Rebuildable• Idlers Have Double Stacked Bearings

• Stop Wheel Failures!• CAT 247/257 A&B, ASV/TEREX 30/50/60 Models

• Forget Hubbed Wheels - Upgrade To Bolt-On Alloy Wheels• 10% Larger Axle Than OEM & 43% Larger Bearings

• Grease Packed / Preload Adjustable• No Inner Sleeves, Bushings, Spacers, Seals Or O-Rings!

TOLL FREE 855-575-LUGS (5847)www.bairproducts.com

email: [email protected]

STOP TRACK DERAILMENTS ON COMPACT TRACK LOADERS• CAT 279C/289C/297C/299C LOADERS

• Turn One & Two Flange Idlers Into Three Flange Idlers

• Capture The Track’s Cleats At All Four Sides

• Spread The Machine’s Weight, Torque Forces Out And Over The Drive Cleats

NEW ON THEMARKET

NEW ON THEMARKET

NEW ON THEMARKET

DON ALLISON EQUIPMENT, INC.233 Melville Road Arley, AL 35541

800-669-6450205-387-1600

Fax: 205-387-1668

This bracelet was a gift Amber Apodoca

received from the center where she helped teens with

drug and alcohol problems. She was wearing it

when an underage drunk driver took her life.

Friends Don’t Let Friends Drive Drunk.

Pho

to b

y M

icha

el M

azze

o


Contact us today.

Hauling pallets of pavers, rocks,trees, or retaining-wall block?Stick a fork on a 244J Compact Loaderand the job gets done — quickly andefficiently. This tight-turning, heavy-lifting loader serves up best-in-classmaneuverability, travel speed, breakoutforce, reach, and stability. Switch to abucket to move gravel, sand, mulch, orsnow. Unique stereo steering delivers a20-percent tighter turning radius — forfaster cycle times and less materialspillage around the equipment yard orgarden center. Customer-inspiredenhancements include a spacious, sound-suppressed cab and unrestrictedall-around visibility.

When you’re ready to feast on more productivity, order up a John Deere 244J.

Albany, GA229/888-1212

Atlanta, GA404/691-9445Grovetown, GA706/855-5440Columbus, GA

706/687-3344Braselton, GA

770/965-1889Macon, GA

478/788-1586Adairsville, GA770/773-9857

Brunswick, GA912/264-6161Savannah, GA

912/964-7370Dothan, AL

334/794-8691Troy, AL

334/566-4181Perry, FL

850/584-9200Tallahassee, FL850/575-5600

Aynor, SC843/358-5688

West Columbia, SC803/794-9340Simpsonville, SC864/963-5835

Ladson, SC843/572-0400

Andrews, SC843/221-4940Walterboro, SC843/539-1420

R.W. MooRE

EQUIP. co.

Main office

Garner, NC919/772-2121

Ahoskie, NC252/332-5550Hope Mills, NC910/424-1200New Bern, NC

252/638-5838Greenville, NC

252/758-4403Castle Hayne, NC910/675-9211

Ashland, VA804/798-6001

Manassas Park, VA703/631-8500Winchester, VA540/667-9777Richlands, VA

276/596-9440Asheville, NC

828/667-0176

Charlotte, NC704/597-0211800/532-6797Greensboro, NC336/668-2762800/632-0376Mt. Gilead, NC910/439-5653800/692-9175

Salem, VA540/380-2011

coASTAl

EQUIPMENT coRP.

Main office

504 South Military Hwy.Virginia Beach, VA 23464

757/424-1900Yorktown, VA

757/898-1900

flINT EQUIPMENT coMPANy JAMES RIVER EQUIPMENT


DITCH WITCH OF TENNESSEEwww.ditchwitchtn.com

Nashville140 Charter Place

LaVergne, TN 37027615-793-7576800-449-4814

KnoxvilleLouisvile, TN 37777

865-970-2840800-445-4814

GROWERS EQUIPMENT CO.www.growersequipment.com

2695 Davie Rd.Davie, FL 33314954-916-1020

Miami (Doral), FL(parts only)

305-592-7892

TRACTOR & EQUIPMENT CO.www.tractornequipment.com

2006 Northwest Blvd.Newton, NC 28658

828-695-1025

CHARLOTTE TRACTORwww.charlottetractor.com

1700 Starita Rd.Charlotte, NC 28206

704-596-8900800-532-1011

GREENSBORO TRACTORwww.greensborotractor.com2820 S. Elm-Eugene StreetGreensboro, NC 27406

336-273-3606

EVERYTHING YOU VALUE

Case Adds Larger Engines, Tier IVUpgrades to Alpha Skid Steer ModelsCase Construction Equipment

recently upgraded its largest AlphaSeries skid steers and compact trackloaders, which now meet emissionrequirements for Tier IV Interim certi-fication.The Case SR250 and SV300 skid

steers and TR320 and TV380 compacttrack loaders now feature 90 hp (67kW), 3.4 L Case diesel engines withthe full high-pressure common rail(HPCR) design typically used in largerconstruction equipment. To meet TierIV Interim emission requirements,Case equipped the models with cooledexhaust gas recirculation (CEGR)technology, including diesel particulatefilter and diesel oxidizing catalyst.Case selected CEGR technology asmost appropriate for skid steers andcompact track loader applications,where the engine typically runs at ahigh RPM.Rated operating capacities are 2,500

lb. (1,135 kg) for the SR250; 3,000 lb.(1,361 kg) for the SV300; 3,200 lb.(1,451 kg) in the TR320, and 3,800 lb.(1,723 kg) for the TV380. The Case 3.4 L engine in the

upgraded Alpha Series skid steers andcompact track loaders features a newpiston design — specifically engi-neered for use in high pressure com-mon rail (HPCR) fuel systems — thatpromotes thorough combustion, opti-mizes power and fuel efficiency. The electronic engine controls mon-

itor EGR sensors and other inputs todetermine diesel particulate filter(DPF) system regeneration needs.

Dozer-Style UndercarriageAs in previous Case models, the

upgraded Case TR320 and TV380compact track loaders feature a dozer-style undercarriage, engineered to holdfast on steep slopes and take commandof muddy or sandy terrain. The under-carriage has a rigid track frame withfewer moving parts, so it is moredurable and easier to maintain thansuspension track systems, according tothe manufacturer. For more information, visit

www.casece.com.

The Case SR250 and SV300 skid steers and TR320 and TV380 compacttrack loaders now feature 90 hp (67 kW), 3.4 L Case diesel engines withthe full high-pressure common rail (HPCR) design typically used in larg-er construction equipment.

The upgraded Case TR320 and TV380 compact track loaders feature adozer-style undercarriage, engineered to hold fast on steep slopes andtake command of muddy or sandy terrain.


www.kubota.comOptional equipment may be shown.

©Kubota Tractor Corporation, 2010

Now available with a pressurized comfort cab. Schedule your Kubota SVL Series demo today.

BALDWIN TRACTOR & EQUIPMENT

www.baldwintractor.com22463 State Highway 59SRobertsdale, AL 36567

251-947-4171

JONESBORO TRACTOR SALES INC.

5312 Stadium Blvd.Jonesboro, AR 72402

888-931-9151870-935-9151

MASON TRACTOR CO.www.masontractorco.com1050 Appalachian HwyBlue Ridge, GA 30513

706-632-3777McDonough, GA 30253

770-957-3370

Cumming, GA 30040770-887-6119

TYLER EQUIPMENT CO., INC.2613 Main St.

Conway, SC 29516843-248-5294

COASTAL EQUIPMENT SYSTEMS

www.coastalequipmentsystems.com

5287 New Kings RoadJacksonville, FL 32209

904-924-9624

CREEL TRACTOR CO.www.creeltractor.com3771 Palm Beach Blvd.Fort Myers, FL 33916

239-694-2185Fax: 239-694-6059

BROOKS SALES INC.www.brookssales.com3144 Highway 74 EastMonroe, NC 28112

704-233-4242

FUTCH’S TRACTOR DEPOTwww.futchstractordepot.com

8515 S.R. 207 NorthHastings, FL 32145

904-692-3673Fax: 904-692-2842

STEVENSON TRACTOR, INC.www.stevensontractor.com1792 S. Military Hwy.Chesapeake, VA 23320

757-420-4220


Vermeer SoutheastSales

& Service, Inc.Boynton Beach, FL

1060 West Industrial AvenueBoynton Beach, FL 33462

561-742-7400 • Fax: 561-742-7448

Clearwater, FL12785 N 44th St.

Clearwater, FL 33762727-299-9207 • Fax: 727-299-0166

Ft. Myers, FL2231 Flint Dr.

Ft. Myers, FL 33916941-337-5900 • Fax: 941-337-5901

Jacksonville, FL11550 Philips Hwy.

Jacksonville, FL 32256904-262-4400 • Fax: 904-262-0619

Orlando, FL4559 Old Winter Garden Rd.

Orlando, FL 32811407-295-2020 • Fax: 407-293-8087

Miami, FL13301 S.W. 131st Str.Miami, FL 33186-5816

305-234-4556 • Fax: 305-234-5561

Pensacola, FL6691 Mobile HighwayPensacola, FL 32526

850-944-8110 • Fax: 850-944-8166

Tallahassee, FL31767 Blue Star HwyMidway, FL 32343

850-575-1556 • Fax: 850-575-5718

Marietta, GA1320 Gresham Rd.Marietta, GA 30062

770-973-8811 • Fax: 770-973-7829

Savannah, GA411B Telfair Rd.

Savannah, GA 31415 912-238-1300 • Fax: 912-238-1003

Birmingham, AL2950 Pinson Valley Parkway Birmingham, AL 35217

205-841-9895 • Fax: 205-841-9841

Decatur, AL314 Beltline Rd

Decatur, AL 35601 256-341-0700 • Fax: 256-341-0773

Vermeer Puerto RicoAve. Cementerio NacionalLocal #49, Hato Tejas

Bayamon, Puerto Rico 00961 787-780-0533 • Fax: 787-780-1501

Vermeer of Texas-Louisiana8272 Rushing Road

Denham Springs, LA 70726225-665-7900 • Fax: 225-665-7979


2238 Pinson Valley PkwyP.O. Box 10624

Birmingham, AL 35202205.841.6666

35 Schillinger Road, NP.O. Drawer 29

Mobile, AL 36601251.633.4020

3120 Old Hayneville Rd. P.O. Drawer 9367

Montgomery, AL 36108334.262.6642

15101 Alabama Hwy 20 Madison, AL 35758

P.O. Box 6192 Huntsville, AL 35824

256.536.9390www.cowin.com

1501 Highway 78 EastOxford, AL 36203

256.832.50537950 Pittman Ave.

Pensacola, FL 32591850.479.3004

Cowin Equipment Company, Inc. ACT Construction355 Business Park DriveWinston-Salem, NC 27107

800.849.54383001 Boundary St.

Wilmington, NC 28405800.849.5438

www.actforklift.com

Cobb County Tractor1520 Cobb Parkway N.Marietta, GA 30062

770.427.1348www.cctractor.com

Perimeter Takeuchi3022 Peachtree Industrial Blvd.

Buford, GA 30518770.614.5730


Topcon GPS-Equipped Iron Gets Workout From Attendees

(L-R): Scott Knox and Craig McBeth, both of John Deere; and DrewBouche and Steve Surrett, both of Lane Construction, Raleigh, N.C.,all enjoyed the day out of the office shooting.

This John Deere 764 dozerequipped with Topcon 3D MC²was tested out by a steadystream of operators.

About to take the first shots for the day are (L-R) Mike Cooney, Triton Sitework DevelopmentLLC, Raleigh, N.C.; Brian Metcalf, RW Moore;Mike Johnson, Triton Sitework DevelopmentLLC; Craig McBeth, John Deere; host DanMoore; and Scott Knox, John Deere.

Chuck Harris (L), Benchmark Tool & Supply’sevent host, thanks Steve Harris, The Fred SmithCompanies, for his business.

James Cummings, Waste Industries, Apex, N.C., liked the effi-ciency of the John Deere 700K LGP dozer equipped with aTopcon device.

Josh Kearns (L) and MikeGaillard, both of Benchmark Tool& Supply, talk about theincreased operator efficiencywhen a Topcon LS-B100 laserreceiver is placed on an excava-tor.

see SKEET page 93

(L-R): Terry and Kathy Parker, TAPConstruction, Four Oaks, N.C., are welcomed tothe annual clay shooting event by Dan Moore.

SKEET from page 12

SECT IONPaving

Dynapac Unveils 5th Generation of Single Drum RollersDynapac USA has introduced four mod-

els of its CA-series single drum vibratoryrollers. The CA5000, CA5500, CA6000 andCA6500 have been equipped with a numberof enhancements over previous models,including optimized drum amplitude, auto-matic bouncing control and an overalldesign that makes it easier to service theequipment, according to the manufacturer.

Compaction is delivered by the new mod-els utilizing drum amplitude of .083in. (.2 cm.) This increasedforce allows rock fill tobe compacted in layersalmost 9 ft. (2.7 m) thickwith rock sizes up to 3 ft.(.9 m) in diameter. Italso requiresfewer passes toreach com-paction specifi-cations.

Automatic bouncing control measuresfeedback from the drum and eliminatesdrum bouncing or over compacting. Thisfeature improves compaction performancewhile extending the useful life of the equip-ment by eliminating drum double-jump,which could lead to premature failure ofmachine components, according to the man-ufacturer.

The CA6000D

model also features a governor to avoidcompacting at too high a speed.

A full package of design featuresenhances the serviceability of all models.The cross-mounted engine not only offerseasy access for service and maintenance, italso provides enhanced weight distributionand reduces overall machine length. Thehydraulic pumps, arranged in line with theengine, are easily accessed for servicing.

Another key feature is the “ECOmode” fuel conservation system thatminimizes fuel consumption aswell as carbon dioxide emissionsby ensuring that the roller does notconsume more power than neededat any given time. The models also

give attention to enhanced safety fea-tures with electronic drive control,which provides a “quick brake” func-tion and a tilt indicator. Dynapac’santi-spin traction system ensuresconsistent on-the-go traction andgradeability.

The combustion air intake isplaced on the engine hood with the

outlet running down the sides, thereby keep-ing the inlet air as clean as possible. Whencombined with the ejector exhaust outlet,this placement also serves to minimize noiselevels.

The CA rollers have static linear loads of280 pounds per linear inch (pli) on theCA5000, 310 pli on the CA5500, 335 pli onthe CA6000 and 365 pli on the CA6500. Allfour models are equipped with interim TierIV engines from Deutz, and can use a mix ofbiodiesel and regular diesel fuel.

Optional features on the new rollersinclude:

• Service interval alert on instrumentpanel indicates when a particular service isrequired

• Sustainability package: an rpm manage-ment system, biodegradable fill-for-lifehydraulic fluid, 50 hours service kit, electri-cal engine block heater and working lightswith LED lamps (CA6000D only.)

• Air-conditioned cabs with spin-aroundseat and steering module, offering move-ment of up to 180 degrees without stressingneck or body. Spin-around seats also areavailable as a standalone option, without thecab.

• Productivity software, includingDynapac CompBase, providing task

planning, execution andanalysis, and CostCtrl

web-based soft-ware for life-cycle cost con-trol andi n c r e a s e dmachine avail-ability.The CA rollers

are available instandard modelswith a choice of

specifications andavailable options allowing

customers to “build”their own machines, orchoose from a numberof pre-defined pack-ages.

For more information, visitwww.dynapac.us.

Pages 63-75

Dynapac’s new CA6000 single-drum vibratory roller.

Page 64 • October 3, 2012 • www.constructionequipmentguide.com • Paving Section • Construction Equipment Guide

Dynapac USA3700 East 68th Avenue

Commerce City, CO 80022

Phone: 800-732-6762 Fax: 303-288-8828 www.dynapac.us

Authorized Dynapac Dealers

Dynapac’s CC 624F

and compaction performance...

Dynapac’s CC624HF double-drum, high frequency vibratory asphalt rollers offer complete compaction control including mat temperature, speed, blows per foot, and other exceptional features.

Designed to meet the needs of road contractors –

Dynapac – Providing Dynamic Compaction Solutions for over 70 years.

Doggett Construction & Forestry Equipmentwww.doggettgroup.com

St. Rose, LA 504.466.5577Covington, LA985.893.3005

Baton Rouge, LA225.291.3750Sulphur, LA

337.626.8503Alexandria, LA318.442.0455Monroe, LA

318.343.8787Shreveport, LA318.631.3090

Flint Equipment

Albany, GA229.888.1212

Perry, FL850.584.9200

Tallahassee, FL850.575.5600

Aynor, SC843.358.5688

Simpsonville, SC864.963.5835

W. Columbia, SC803.794.9340Adairsville, GA 770.773.9857Atlanta, GA

404.691.9445 Grovetown, GA706.855.5440Braselton, GA770.965.1889Columbus, GA706.687.3344Macon, GA

478.788.1586

James River Equipment

Charlotte, NC704.597.0211

Greensboro, NC336.668.2762Asheville, NC828.667.0176

Rish Equipment Co.

Chesapeake, VA757.485.2100Chester, VA

804.748.6411Coeburn, VA276.395.6901Bealeton, VA540.439.0668

Salem, VA540.380.2090Staunton, VA540.887.8291

Tractor & Equip. Co.

Tuscaloosa, AL205.752.0621

Panama City, FL850.763.4654Pensacola, FL850.505.0550Alabaster, AL205.621.2489Anniston, AL256.831.2440

Birmingham, AL205.591.2131Decatur, AL

256.355.0305Dothan, AL

334.678.1832 Grove Hill, AL334.275.4158

Mobile, AL251.457.8991

Montgomery, AL334.288.6580

Shoals Area, AL256.383.5666

Trekker Tractor, LLCwww.www.trekkertractor.com

West Palm Beach, FL561.296.9710

Miami, FL877.971.7070

Tampa, FL813.341.4646

Bonita Springs, FL239.949.0100

Atlas Copco Construction & Mining

www.atlascopco.usPompano Beach, FL

855.DYNAPACwww.atlascopco.us/miami

LaVergne, TN615.641.3000

www.atlascopco.us/nashville

Knoxville, TN865.673.0344

www.atlascopco.us/knoxville

Construction Equipment Guide • Paving Section • www.constructionequipmentguide.com • October 3, 2012 • Page 65

The Worldwide Leader in Concrete Paving Technology

CONCRETE STREETS AND HIGHWAYS � AIRPORT RUNWAYS � CURB AND GUTTER � SIDEWALKSRECREATIONAL TRAILS � SAFETY BARRIER � BRIDGE PARAPET � BRIDGE DECKS � IRRIGATION CANALS

GOMACO CORPORATION IN IDA GROVE, IOWA, USA � THE WORLDWIDE LEADER IN CONCRETE PAVING TECHNOLOGY � 800-831-2320

[email protected] � www.gomaco.com

FLAGLER CONSTRUCTIONEQUIPMENT, LLC

www.flaglerce.com

5210 Reese RoadDavie, FL, 33314

954-581-4744954-583-0318 (Fax)

5151 Dr. Martin LutherKing, Jr. Blvd.

Ft. Myers, FL 33905239-481-8554

239-481-3302 (Fax)

Birmingham, AL2238 Pinson Valley Parkway

Birmingham, AL 35217205-841-6666

205-849-0853 (Fax)

Mobile, AL23 Schillinger Road North

Mobile, AL 36608251-633-4020

251-633-9157 (Fax)

Montgomery, AL3120 Old Hayneville RoadMontgomery, AL 36108

334-262-6642334-834-2272 (Fax)

Huntsville, AL15101 Alabama Highway 20

Madison, AL 35756256-350-0006

256-355-5250 (Fax)

Oxford, AL1501 Highway 78 East

Oxford, AL 36203256-832-5053

256-831-4295 (Fax)

Pensacola, FL7950 Pittman AvenuePensacola, FL 32534

850-479-3004850-474-1602 (Fax)

5732 Frontage RoadForest Park, Georgia 30297

404-366-0693404-366-9688 (Fax)

160 Robinson Road NWCalhoun, Georgia 30701

706-879-6200

2314 Highway 53Hoschton, Georgia 30548

706-654-9850706-654-9856 (Fax)

1502 Box RoadColumbus, Georgia 31907

706-562-1801706-562-9897 (Fax)

2727 Gray HighwayMacon, Georgia 31211

478-745-6891478-745-7291 (Fax)

3809 Mike Padgett HighwayAugusta, Georgia 30906

706-798-7777706-798-3237 (Fax)

1815 West Oakridge DriveAlbany, Georgia 31707

229-435-0982229-435-5259 (Fax)

1200 Highway 80 EastPooler, Georgia 31322

912-330-7500912-330-7490 (Fax)

1355 Big Shanty RoadKennesaw, Georgia 30144

678-354-5533678-354-5577 (Fax)

STOWERS MACHINERY

CORPORATIONwww.stowerscat.com

Knoxville Headquarters865-546-1414Knoxville West865-218-8800Chattanooga

423-698-6943Kingsport

423-323-0400Crossville

931-484-4040

COWIN EQUIPMENT CO. TRACTOR & EQUIPMENT COMPANYwww.tractor-equipment.com


Serving the Asphalt Industry for 25 YearsServing the Asphalt Industry for 25 Years

1989 Blaw Knox PF200Paver, Omni III screed10-18 ft, Cumminsdiesel engine

2003 SweepsterHBC74MNHbroom attachment,Big Dawg - bucketbroom sweeper attachment, 6 1/2 ftwide

2009 MarathonKERA145HD CrackSealer, rubberized melting kettle for cracksealing and waterproof-ing, 145 gallon, Dieselengine, diesel heat, heated hose and handwand, 80cfm air compressor

2002 Ingersoll RandDD24 Roller, doubledrum 47” vibratoryroller, Kubota dieselengine, OROPS, watersystem, scrapers

2012 Cam Superline6CAM16FTT Trailer,6 ton full tilt trailer, 18 ft long, reverse anglebeavertail, 8 D ring tiedowns, 102” wide, 81”useable width, color-black, GVWR 13,800 lbs,empty weight 2880 lbs,payload 10,920 lbs

2003 Hypac C530AHRoller, 9 wheel rubber tire roller,Cummins 3.3L dieselengine, co-co mats,water system, canopy

1998 Etnyre 9-18 ftextendable chipspreader, 4 wheeldrive, computerized,hydrostatic drive,Cummins dsl eng

2005 CaterpillarAS2301 Screed,Caterpillar Screed lowhour take off, 10 - 181/2 feet, diesel heat,power crown & slope

1975 Blaw Knox RW195 Road Widener,4 wheel drive, 14ftwidening, 2-3ft hyd.Ext.

866-430-75393517 Wayne White Rd., Climax, NC 27233

[email protected]

www.jfwequipment.com


FLORIDA

Pensacola, FL850-505-0550

Panama City, FL850-763-4654

ALABAMA

5336 Messer Airport Hwy.Birmingham, AL 35212

205-591-2131

Fax: 205-591-8321

Grove Hill, AL251-275-4158

Tuscumbia, AL256-383-5666

Dothan, AL334-678-1832

Mobile, AL 251-457-8991

Decatur, AL256-355-0305

Alabaster, AL205-621-2489

Tuscaloosa, A205-752-0621

Montgomery, AL334-288-6580

Oxford, AL256-831-2440

www.tractor-equipment.com

www.reynoldswarren.com1945 Forest ParkwayLake City, GA 30260

800-875-5659 • 404-361-1593

Fax: 404-361-1885

RICHMOND MACHINERY &EQUIPMENT CO., INC.

1701 Roseneath Rd.Richmond, VA 23230

1-800-662-6485


POWER EQUIPMENTCOMPANY

3300 Alcoa HighwayKnoxville, TN 37920

(865) 577-5563

1487 Rock Springs RoadKingsport, TN 37664

(423) 349-6111

Highway 58 @153Chattanooga, TN 37406

(423) 894-1870

1290 Bridgestone PkwyLaVergne, TN 37086

(615) 213-0900

3050 Ferrell Park CoveMemphis, TN 38116-3502

(901) 346-9800

1545 Highway 45Saltillo, MS 38866

(662) 869-0283

RISH EQUIPMENTCOMPANYwww.rish.com

917 Cavalier Blvd.Chesapeake, VA 23323

(757) 485-2100(757) 485-3616

1410 West Hundred Rd.Chester, VA 23836

(804) 748-6411

133 Wise Mountain Rd.NW

Coeburn, VA 24230(276) 395-6901

Fax: (276) 395-3438

10214 Fayetteville Rd.Bealton, VA 22712

(540) 439-0668Fax: (540) 439-0719

5731 Glenmary DriveSalem, VA 24153(540) 380-4858

66 International laneSuite 102

Staunton, VA 24401(540) 887-8291

Fax: (540) 887-8295

REYNOLDS-WARRENCOMPANY INC1945 Forest ParkwayLake City, GA 30260

(800) 875-5659(404) 361-1593

TRACTOR & EQUIPMENT COMPANY

5336 Messer-Airport HwyBirmingham, AL(205) 591-2131

3820 Greensboro Ave.Tuscaloosa, AL(205) 752-0621

2100 East I-65 Service Rd.North

Mobile, AL(251) 457-8991

800 Church St. N.E.Decatur, AL

(256) 355-03053285 Selma HighwayMontgomery, AL (334) 288-6580

243 South Jackson St.Grove Hill, AL

(251) 275-4158961 Hwy 20 & Elledge Lane

Tuscumbia, AL(256) 383-5666

4307 Reeves StreetHighway 431 North

Dothan, AL(334) 678-1832

309 Hamric Drive WestOxford, AL

(256) 831-2440150 Piper LaneAlabaster, AL

(205) 621-24893305 Highway 77Panama City, FL(850) 763-4654

9036 Pine Forest Rd.Pensacola, FL

(850) 505-0550

Volvo PF6160, PF6170 Wheel-MountedPavers Designed for Productivity

The Volvo PF6160 and PF6170 wheel-mounted paversare part of the PF6000-Series highway-class asphalt paverline that utilizes global technology to provide solutions thatincrease paving performance and provides maximum uptimefor the machine, according to the manaufacturer. Both the PF6160 and PF6170 are powered by a 205-hp

(153 kW) Tier III-certified Cummins engine. A level-loadsuspension design uses the two drive wheels and the centerof the bogie hydraulic system. This provides consistent andeven ground contact for stability. Both the PF6160 and thePF6170 come standard with the two-wheel front-wheelassist; however, the PF6170 can be configured with anoptional four-wheel front-wheel assist for all-wheel-drivecapability. The torque is adjusted based on the hopper load,optimizing the machine’s traction.

Material ManagementA number of features on these pavers provide contractors

with more options in material flow. The auger system is inde-pendent of the conveyor system with each of the two augerand conveyor drives using sonic sensors for more precisehandling of material. The conveyor system has chains thatare automatically tensioned for proper performance and lessdowntime. The conveyor chain cover cleans itself, providingeasier maintenance. Reversible augers and conveyors areoptional equipment.

A hopper capacity of 14.38 tons (13.04 t) gives each pavera practical production rate of 820 tons (744 t) per hour.Standard on all PF6000-Series pavers are hopper locks thatkeep hopper wings secure during transport.

Operator ControlsThe PF6160 and PF6170 feature dual control stations,

which can pivot at two points for comfort, and each seat maybe extended beyond the edge of the machine for improvedvisibility. An open deck space improves mobility for theoperator and increases visibility, and secure handrails pro-vide added safety. The operator panel keeps all controls,gauges and warning lights at the fingertips of the operator,with the ability for the panel to tilt or swivel to fit the com-fort of the operator.

Your Choice of ScreedThe Volvo PF6160 and PF6170 can fit the Omni 318,

Omni 1000 or Ultimat 200 screeds, allowing the flexibilityto build a paver to fit the needs of the application. Bothpavers have a screed width of 10 ft. (3 m) and a maximumpaving width of 26 ft. (8 m). PF6000-Series pavers have a30-kilowatt generator providing plenty of power to thescreeds. For more information, call 828/650-2000 or visit

www.volvo.com.

The PF6160 and PF6170 feature dual control stations, which can pivot at two points for comfort, and each seatmay be extended beyond the edge of the machine for improved visibility.



POWER AND PRODUCTIVITY.Get More Done With Versatile Terex® Compact Equipment

You need a machine that offers the right combination of power and productivity. And that’s what you get with Terex® equipment.

We offer over 60 unique models within our construction product line. Our skid steer loaders, excavators, wheel Loaders, backhoes and compact track loaders provide the traction, maneuverability, reach and clearance you need to take control of demanding repetitive workloads.

© 2012 Terex Corporation. All rights are reserved. Terex is a registered trademark of Terex Corporation in the USA and many other countries.

LashleyTractor Sales

6953 Covington HighwayLithonia, GA 30058Fax: 770-808-0735

www.lashleytractorsales.net

770-808-5500866-458-1207

GIVE. ADVOCATE. VOLUNTEER. LIVE UNITED™

Want to make a difference? Find out how at LIVEUNITED.ORG.


www.sakaiamerica.com1-800-323-0535

WHILE SOME PEOPLE ARE HAVING A PROBLEM GRASPING THE CONCEPT,THEY’RE SURE NOT HAVING ANY DIFFICULTY GRABBING THE RESULTS.

It’s a rubber tire roller that vibrates with enough centrifugal force to equal the output of a55,000 pound pneumatic. The GW750 handles the toughest HMA mixes with ease, gettingbalanced high densities from the top through the bottom of the mat. Great on SMA, too! Andit provides a sound interlock between new overlays and profiled surfaces. It’s bonus time!

Check one out at your Sakai dealer today.

JAMES RIVEREQUIPMENT

Ashland, VA 23005804/798-6001

Burkeville, VA 23922434/767-5578

Chester, VA 23831804/748-9324

Fishersville, VA 22939540/337-3057

Fredericksburg, VA22408

540/373-2778Salem, VA 24153

540/380-2011Manassas Park VA 20111

703/631-8500South Hill, VA434/447-1325

Danville VA 24540434/822-6110

Richmond VA 23220840/358-6776

Winchester, VA 22602540/667-9777

Asheville, NC 28806828/667-0176

Charlotte, NC 28269704/597-0211800/532-6797

Greensboro, NC 27409336/668-2762 800/632-0376

Wilkesboro, NC 28697336/973-8201800/422-4193

Mt. Gilead, NC 27306910/439-5653800/692-9175

Asheboro, NC 27203 336/625-2212

Salisbury, NC 28144 704/636-2571

Matthews NC, 28104704/821-7399

Rock Hill SC 29730803/325-1555866/277-8119

Reynolds-Warren Equipment Companywww.reynoldswarren.com1945 Forest ParkwayLake City, GA 30260

800/875-5659 • 404/361-1593

T


Birmingham, AL205-841-6666Mobile, AL

251-633-4020Montgomery, AL

334-262-6642

Huntsville / Decatur, AL

256-350-0006Oxford, AL

800-917-7931Pensacola, FL850-479-3004

RICHMOND MACHINERY & EQUIPMENTRichmond, VA804-359-4048800-662-6485

Orlando, FL (Corporate Office)407-659-8700Orlando, FL

407-850-9614Jacksonville, FL904-737-6000

Ft. Myers, FL239-481-8554Davie, FL

954-581-4744Tampa, FL

813-630-0077

ASC CONSTRUCTIONEQUIPMENT

NORTH CAROLINAAsheville, NC828-687-0620Charlotte, NC704-596-8283Raleigh, NC

919-661-8710Greenville, NC252-754-5280

ASC CONSTRUCTIONEQUIPMENT

SOUTH CAROLINAColumbia, SC803-791-0740Piedmont, SC864-704-1060

North Charleston, SC843-414-1120

ASC CONSTRUCTIONEQUIPMENT GEORGIABuford, GA

678-318-9500Savannah, GA912-964-8079Forest Park, GA770-319-0074

ASC CONSTRUCTIONEQUIPMENT TENNESSEEChattanooga, TN

423-308-7940Knoxville, TN865-525-1845

FLAGLER CONSTRUCTION EQUIPMENT, LLC.

COWIN EQUIPMENT CO. INC.

INCREASE YOUR BONUS POTENTIAL.LET’S WORK.You need a partner you can rely on. Volvo Construction Equipment builds high-qualityroad building equipment backed by knowledgeable industry experts. We understand thatreliability and performance help you meet strict specifications, keeping you profitable and helpingearn your bonus. Our graders, milling machines, pavers and compactors are engineered to dojust that – keep you productive and give you the best shot at increasing your earning potential.

Learn how to increase your productivity by contacting a Volvo dealer near you.Visit volvoce.com/na today.



SARASOTA PARTS

Sarasota, FL 34243941-752-1300

TAMPA PARTS

Riverview, FL 33569813-621-4902

MIAMI

Miami, FL 33166305-592-5740

WEST PALM BEACH

West Palm Beach, FL 33404561-848-6618

ORLANDO

Orlando, FL 32804407-299-1212

FORT MYERS

Ft. Myers, FL 33916239-334-3627

POMPANO BEACH PARTS

Pompano Beach, FL 33064954-977-9541

MELBOURNE PARTS

West Melbourne, FL 32904321-729-8944

NEW TAMPA

Lutz, FL 33559813-995-0841

NORTRAX


www.wirtgenamerica.comROAD AND MINERAL TECHNOLOGIES

THE NEW DYNAMIC EFFICIENCY W 210i WITH MORE THAN 60 NEW INNOVATIVE FEATURES

More power with less fuel technology:PTS – Parallel to Surface

WIDRIVE – New control solutions

ISC – Intelligent speed control

LEVEL PRO – Designed for the crew

3DS – Flexible application drum speed

VCS – Environmentally friendly

W 210iEngine: 716 HPMilling widths: 6’ 7”; optional: combo and 7’ 3”Milling depth: 13”Operating weight, CE: 63,670 lbs

Knoxville, TN • 865/577-5563LaVergne, TN • 615/213-0900

Chattanooga, TN • 423/894-1870Kingsport, TN • 423/349-6111Memphis, TN • 901/346-9800Saltillo, MS • 662/869-0283

FloridaFt. Myers • 239/337-1313Jacksonville • 904/786-6710

Ocala • 352/629-7585Orlando • 407/849-6560

Pembroke Pines • 954/433-2800Plant City • 813/754-2727

West Palm Beach • 561/863-0570

North CarolinaAsheville • 828/681-5172Charlotte • 704/376-7554Greenville • 252/695-6200High Point • 336/665-0110Raleigh • 919/851-2030

Wilmington • 910/254-2031

South CarolinaColumbia • 803/794-6150Greer • 864/877-8962

North Charleston • 843/552-0095

Operating Max DigM

find us on

Ashland, VA • 804/798-6001Fishersville, VA • 540/337-3057Richlands, VA • 276/596-9440Salem, VA • 540/380-2011

Winchester, VA • 540/667-9777www.JamesRiverEquipment.com

www.facebook.com/linderindustrialmachinery


Calder Brothers Corporation250 E. Warehouse Ct. | Taylors, SC 29687

phone: (864) 244-4800 | fax: (864) 244-5007 | www.4aMauldin.com

Discover More Ways Mauldin Can Help You Become a Master of the Mat.

Mauldin’s 1750-C Super

Paver is ready for fast andhard action. Unmatched performance and durabilityset this heavyweight apart from all others.

Check the details atwww.4aMauldin.com.

M413XT

MG622

PrecisionSpray

STOWERS MACHINERY CORP.www.stowerscat.com

Knoxville Headquarters (865) 546-1414Knoxville West (865) 218-8800Chattanooga

(423) 698-6943Kingsport

(423) 323-0400Crossville

(931) 484-4040

RICHMOND EQUIPMENT &

MACHINERY CO., INC.www.richmondmachinery.com

1701 Roseneath RdRichmond, VA 23230

(804) 359-4048(800) 662-6485

Attalla-Gadsden, AL (866) 811-7609Birmingham, AL(800) 547-0760Crestview, FL(850) 682-6510

Decatur-Huntsville, AL (800) 435-0922Dothan, AL

(334) 671-1040Huntsville, AL(256) 532-1776Marianna, FL(850) 526-2241Mobile, AL

(800) 243-0665Montgomery, AL (800) 521-9511

Opelika-Auburn, AL (334) 749-3359

Oxford-Anniston, AL (800) 547-8897Panama City, FL (850) 785-4007Pensacola, FL(850) 471-6700

Shelby County, AL (205) 664-4833Thomasville, AL(334) 636-0420Tuscaloosa, AL (205) 247-2800Tuscumbia, AL (256) 381-2771

Albany(800) 768-2892

Augusta(800) 446-5131

Austell(800) 282-1562Bloomingdale(800) 482-1144

Brunswick(800) 299-5010

Calhoun(800) 752-9804

Columbus(800) 633-5240

Dacula(800) 545-2945

Kennesaw(866) 289-2228

Macon(800) 633-5180

Savannah(800) 755-8382Statesboro

(888) 764-6506Valdosta

(800) 755-6841Washington

(888) 678-3211Waycross

(888) 948-2443

KELLY TRACTOR CO.8255 NW 58th St.

Miami, FL(305) 592-5360Clewiston, FL(863) 983-8177Ft.Myers, FL

(239) 693-6563West Palm Beach, FL

(561) 683-2015Davie, FL

(954) 581-8181

LOUISIANA [email protected]

P.O. Box 356Reserve, LA 70084(985) 536-1121(866) 843-7440Alexandria, LA(318) 443-2577Bossier City, LA(318) 746-2341Hammond, LA(985) 340-2820Lake Charles, LA(337) 439-3601Lafayette, LA(337) 837-2476Monroe, LA

(318) 323-1345Prairieville, LA(225) 673-3480Mansfield, LA(318) 872-9700

THOMPSON TRACTORwww.thompsontractor.com

YANCEY BROS. CO.www.yanceybros.com

Page 76 • October 3, 2012 • www.constructionequipmentguide.com • Parts Section • Construction Equipment Guide

Doosan DX140W Wheel ExcavatorFeatures More Power, Performance

The Doosan DX140W wheel excavator combinesincreased power and performance with interim Tier 4 (iTIV)updates. New technologies make this excavator ideal forhighway and street development, commercial construction,bridge and railway development and dealer rental, accordingto the manufacturer.The DX140W is powered by a 135-hp (100.6 kW), 6-

cylinder DL06KB water-cooled diesel engine that has beenoptimized for use with cooled exhaust gas recirculation(CEGR) system, diesel oxidation catalyst (DOC) and dieselparticulate filter (DPF). The engines in this configuration areoptimized to reduce nitrogen oxide (NOX) and after-treat-ment is needed to reduce particulate matter, to comply withiT4 emission regulations. The turbocharged 359-cu.-in.engine features a high pressure common rail design withdirect fuel injection, electronic control and four valves percylinder.

PerformanceThe electronic power optimizing system (EPOS) provides

optimum power and fuel efficiency via four work modes,auto-idle and machine diagnostics. Operators can work moreeffectively with multiple operating modes, easy-to-read dis-play monitors and precise control levers. The new powerplus mode provides improved performance and faster work-group speeds for heavy duty work. Four work modes — dig-ging, breaker, shear and the new lifting mode — allow oper-ators to get maximum efficiency and fuel economy in spe-cific applications.A new electronic fan clutch reduces fuel consumption and

noise levels, while providing cooling system improvements.Outriggers can be controlled individually to level themachine on uneven surfaces. The front axle oscillates andprovides excellent steering angles for maneuverability, butcan be locked for better digger and lifting performance.

OptionsThe DX140W features a new intelligent floating boom

option that allows the boom of the excavator to “float” up ordown, allowing the operator to focus more on the task whiledecreasing the machine workload and increasing efficiency.Intelligent floating boom mode allows the boom to movefreely up and down without hydraulic flow; and in breakermode the boom is allowed to move freely down, only with-out hydraulic flow. A temporary reset button allows the abil-ity to momentarily disengage the float, allowing hydraulicflow to activate the boom. Also offered is an air compressor,which is ideal for operators in remote and dusty locations toblow out the cab or filters.

ComfortDoosan continues to focus on operator comfort with fur-

ther enhancements to the roll-over protective structure(ROPS) cabin. Both a seat height lever and tilting functionfor the seat cushion were added to the seat to allow the oper-ator to find an optimum seating position. The cabin mount-ing mechanism has been improved with a thickened damp-ening plate, and an internal coil spring has been added toreduce cabin vibration 20 percent, allowing operators towork longer days with less fatigue.The door window position slider now locks in various

positions, preventing it from moving from its intended loca-tion. The door space of the cab has increased by 1.8 in.,allowing the operator to get in and out more easily. The cabinsize has increased 6.1 percent, providing more headroom.The joystick angle has been reduced from 25 degrees to 19degrees to provide a more ergonomic profile and decreaseinterference with operators’ legs.The Doosan DX140W — like every new Doosan

machine — is covered by a 48 hour parts guarantee. The pro-gram guarantees that if a “machine-debilitating” part is need-ed, Doosan will deliver it directly to the end user within twobusiness days or Doosan will pay for a replacement machinerental. The 48 hour parts guarantee is subject to carrier deliv-ery restrictions and/or governmental agency delays.For more information, visit www.doosanequipment.com.

The DX140W is powered by a 135-hp (100.6 kW), 6-cylinder DL06KB water-cooled diesel engine that has beenoptimized for use with cooled exhaust gas recirculation (CEGR) system, diesel oxidation catalyst (DOC) anddiesel particulate filter (DPF).

Construction Equipment Guide • Parts Section • www.constructionequipmentguide.com • October 3, 2012 • Page 77

Tier IVi Compliant…

Doosan Portable Power Offers Four New Mobile GeneratorsDoosan Portable Power now offers four

new models in its mobile generator portfoliothat have been designed to meet federalEnvironmental Protection Agency (EPA)Tier IV Interim (Tier IVi) emission stan-dards.

The new models include: • The G150, with a prime power rating at

152 kVA / 122 kW• The G190, with a prime power rating at

194 kVA / 155 kW• The G240, with a prime power rating at

238 kVA / 190 kW• The G325, introduced earlier this year,

with a prime power rating at 326 kVA / 261kW

These new Doosan generators have beensubstantially redesigned from their predeces-sors to incorporate numerous innovationsbased on customer input to improve theoperator experience.

Controls Are Simplified for Easy Operation

The new operator-preferred analog con-trol panel has been enhanced featuring large,brightly lit meters for at-a-glance monitor-ing. The onboard engine diagnostic display

panel from Doosan now includes the con-trols and indicators required to operate andmaintain the aftertreatment regeneration sys-tem that is a key component of the new TierIVi technology to meet engine emissions. Arun/idle switch on the control unit ensuresreduced engine wear during startup inextreme cold temperatures. Dual frequencycapability is now standard on the Tier IVportfolio to expand the versatility of themachines to power 50Hz applications withthe simple flip of a switch.

All four generators feature a voltageselector switch for quick and easy configura-tion for most common voltages. The signa-ture protection feature on Doosan PortablePower generators prevents operators fromswitching voltage during operation — acommon cause of downtime and expensivecomponent failure, according to the manu-facturer.

Connection PanelsConnection panels are now more accessi-

ble for improved safety and conveniencewith more power wiring connections avail-able, an optional camlock panel to furtherexpand connection versatility, an array of

twist-lock and GFCI receptacles and a ter-minal board that accepts bare wire or luggedcable.

Panels are “tool release” to protect againstcontact with live electrical terminals andconnection areas are illuminated to improvesafety during nighttime operation.

Sound LevelsSound levels are reduced by as much as 5

dBA to ensure quiet operation. Because TierIVi technology increased the cooling needsof the generator, Doosan Portable Powertook the Tier changes as an opportunity todevelop a completely new and uniqueapproach to package cooling from theground up.

The rugged enclosure features a dual-compartment design, incorporating the pow-ertrain and cooling system into separatecompartments. The package design com-bined with the use of electric cooling fansand a radial-fan in the new Tier IVi genera-tors yield lower sound levels without sacri-ficing performance or reliability — even atextreme temperatures — and all with mini-mal increase to the generator footprint,according to the manufacturer.

ServiceablilityServiceability continues along with Tier

IVi technology. The new generators fromDoosan Portable Power have 500-hour serv-ice intervals. Longer runtime — exceeding24-hours at any load factor — is ensuredwith these new units due to increasedonboard fuel capacity.

ReliabilityThe heavy-gauge galvannealed steel

enclosure is finished with a 13-stage pow-der-coat process to provide the ultimate incorrosion protection, while ensuring super-quiet operation.

The environmental containment systemcontains and prevents spillage of fuel and oil,while the new enclosure design yields near-zero water ingression into the containmentbasin, even in the heaviest of rainstorms.

For safe and trouble-free towing, themobile generator units are built on heavy-duty skid bases and feature the toughest run-ning gear components for on- or off-roadtransportation.

For more information, visit doosan-portablepower.com.


And Your Hitachi Dealers

9550 Statesville RoadCharlotte, NC 28269

704/597-0211Fax 704/596-6198

101 Bruce Rd.Asheville, NC 28806

828/667-0176Fax 828/667-4865

411 South Regional RoadGreensboro, NC 27409

336/668-2762Fax 336/668-3714288 Westgate Drive

Wilkesboro, NC 28697336/973-8201

Fax 336/973-8496305 N. Main St.

Mt. Gilead, NC 27306910/439-5653

Fax 910/439-4568

380 Anderson Road HighwayRock Hill, SC 29730

803/325-1555Fax 803/325-1506

2510 Highway 70 SWHickory, NC 28602

828/322-4300Fax 828/322-4244

2421 US Highway 64 EastAsheboro, NC 27203

336/625-2212Fax 336/625-0738

2725 Old Monroe RoadMatthews, NC 28104

704/821-7399Fax 704/821-4915805 Klumac Road

Salisbury, NC 28144704/636-2671

Fax 704/636-4827

11047 Leadbetter Rd.Ashland, VA 23005

804/798-6001Fax 804/752-7111

1711 E. Hundred Rd.Chester, VA 23836804/748-9324

Fax 804/530-1930Route 360 & 460

Burkeville, VA 23922434/767-5578

Fax 434/767-37743902 W. Main St.Salem, VA 24153540/380-2011

Fax 540/380-554798 Expo Road

Fishersville, VA 22939540/337-3057

Fax 540/337-1495

287 Victory RoadWinchester, VA 22602

540/667-9777Fax 540/667-94419107 Owens Drive

Manassas Park, VA 20111703/631-8500

Fax 703/631-47152055 South Boston Road

Danville, VA 24540434/822-6110

Fax 434/822-605510879 Houser Dr.

Fredericksburg, VA 22408540/898-8933

Fax 540/373-8842

Carolinas’ Division

Virginia Division

504 South Military Hwy.Virginia Beach, VA 23464

757/424-1900

333 Freedom Blvd.Yorktown, VA 23692

757/898-1900

Coastal Equipment Corpwww.coastalequipment.net

al tweaks that April plan, making theroute veer east shortly after enteringthe state to avoid more of the sensitiveareas in Keya Paha County, east againaround the town of Clarks and westaround the town of Western to avoiddrinking water well fields. “TransCanada shares the goal of

protecting key water and naturalresources with Nebraskans,”TransCanada CEO Russ Girling said.The proposal also upgrades plannedsafety measures, adding more remotecontrol shut-off valves and inspections,the company said. Nebraska regulators said they would

review the new proposal and hold apublic hearing on it before submittinga recommendation to the governor,possibly by the end of the year. Thegovernor will decide whether toapprove the new route for the pipeline. “An initial scan of the report indi-

cates that it responds to some of thecomments raised by the NDEQ and thepublic, but a full evaluation will now

begin,” said Mike Linder, director ofthe state agency. Environmental groups have long

opposed the pipeline project becauseof concerns that it could contaminateunderground and surface water sup-plies, increase air pollution aroundrefineries and harm wildlife. Bold Nebraska’s Jane Kleeb said the

latest new route doesn’t go far enoughto address her group’s concerns aboutpotential erosion of the Sandhills andgroundwater contamination, so shebelieves state and federal officialsshould block the pipeline. “The route still crosses the aquifer

and it still crosses sandy soil, so all ofthe same concerns remain,” Kleebsaid. TransCanada spokesman Grady

Semmens said only 36 mi. (58 km) ofthe 275 mi. (442 km) of pipeline inNebraska would cross sandy soils, andthe new route entirely avoids the areaNebraska defined as the Sandhills. Joe Mendelson of the National

Wildlife Federation said the Keystone

XL pipeline puts too much naturalhabitat at risk. “The best approach is to ditch

Keystone XL entirely and embraceclean energy solutions that don’t spillor explode,” Mendelson said. The pipeline is designed to carry oil

from Canada across Montana, SouthDakota, Nebraska, Kansas, Oklahomaand Texas. TransCanada also has pro-posed connecting it to the Bakken oilfield in Montana and North Dakota. President Barack Obama rejected

TransCanada’s original application fora federal permit to build the pipeline inJanuary after congressionalRepublicans imposed a deadline forapproval that didn’t allow enough timeto address questions about the routethrough Nebraska. Since then, TransCanada has split

the project into two pieces. The com-pany began construction in July on thesouthern section of the pipelinebetween Oklahoma and the GulfCoast.

TransCanada Tweaks First Plan, Aims toProtect Vital Water, Natural Resources

PIPELINE from page 1

The Association of Equipment Manufacturers (AEM)recently led a delegation of small and medium-sized mem-ber company representatives from the heavy off-road equip-ment industry on an oil sands trade mission. The trade mis-sion also was sponsored by the American Rental Association(ARA). The group arrived in Calgary for a briefing on the oil

sands industry, and the regulatory and political environmentin Alberta. Speakers for the briefing included formerSyncrude Vice President Don Thompson, HBW ResourcesExecutive Vice President in Canada Randy Kerr, andTransCanada Pipelines Supply Chain Management DirectorGrant Martin. The following day the representatives headed to Ft.

McMurray to tour Syncrude Canada and receive a briefingby the Wood Buffalo Regional Municipality on the eco-nomic and political status of the oil sands, and future pro-jections of growth and investment in the area. “The Canada oil sands are a bright spot for safer and

securer oil in North America, and show tremendous promiseof long-term investment and growth for the U.S. heavy off-road equipment industry,” AEM Vice President of GlobalPublic Policy Nick Yaksich said. “As the industry continues

to grow, equipment manufacturers will play an importantrole in providing the much needed resources for these sitesto successfully operate. Swift approval of the Keystone XLpipeline will boost the American economy by creating moremanufacturing jobs right here at home.” “We are incredibly impressed by the advances taking

place on the oil sands as this region rapidly becomes a lead-ing global source for secure energy,” ARA Vice President ofGovernment Affairs, John McClelland said. “Equipmentrental companies operating in the area are investing heavilyin their rental fleets to meet the demand for equipment thatcontinues to expand as oil sands projects expand. StateDepartment approval of the Keystone Pipeline could expandproduction at the oil sands, and increase demand for rentalequipment at the oil sands and all down the pipelinethroughout North America. These sands are proof of positiveadvances in North American energy security and we lookforward to continuing to support this important industry.”The State Department is currently reviewing the proposed

permit for the Keystone XL oil pipeline. Prompt approvalwill create over 18,000 high-wage jobs in construction andmanufacturing while providing a stable supply of NorthAmerican energy to consumers in the United States.

AEM, ARA Call Oil Sands Industry TradeMission in Calgary, Canada, a Success


1128 Hwy 70 WestGarner, NC 27529

919/772-2121Fax 919/779-5432

3604 Highway 264EGreenville, NC 27834

252/758-4403Fax 252/758-6508

3816 Martin Luther King BlvdNew Bern, NC 28562

252/638-5838Fax 252/638-2949

5039 US 301 SouthFayetteville, NC 28348

910/424-1200Fax 910/424-8763

Northside Industrial ParkWilmington, NC 28429

910/675-9211Fax 910/675-3640

Highway 42 Aulander RoadAhoskie, NC 27910

252/332-5550Fax 252/332-4186

Flint Equipment Company1206 Blaylock St. Albany, GA 31705

229/888-1212Fax: 229/435-3612

180 Princeton Blvd.Adairsville, GA 30103-2628

770-773-9857Fax: 770-773-7226

4500 Wendell Dr. SWAtlanta, GA 30336-1627

404/691-9445Fax: 404/696-1170

5333 BBS WayBraselton, GA 30517-1707

770-965-1889Fax: 770-965-1894

251 Perry Lane Road Brunswick, GA 31525

912-264-6161Fax: 912-264-5263

2400 Victory Dr.Columbus, GA 31902-3457

706/687-3344Fax: 706/682-4738

515 Chamblin Rd. Grovetown, GA 30813-3905

706/855-5440Fax: 706/855-5447

136 Acres DriveLadson, SC 29546

843/572-0400Fax: 843/572-7746

4600 Pio Nono AveMacon, GA 31206-5064

478/788-1586Fax: 478/781-8591

7566 W. TENNESSEE ST. Tallahassee, FL 32304

850/575-5600Fax: 850/575-9972

3033 US Highway 27 East Perry, FL 32348850/584-9200

Fax: 850/584-2844

169 Ross Clark Circle N.E. Dothan, AL 36303

334/794-8691Fax: 334/794-8696

50 Morgan Industrial Blvd. Garden City, GA 31408

912/964-7370Fax: 912/964-1822

1220 Henderson HWY Troy, AL 36081 334/566-4181

Fax: 334/566-4361

4900 East Highway 501 Aynor, SC 29511

843/358-5688Fax: 843/358-2826

116 Corporate Drive Simpsonville, SC 29681

864/963-5835Fax: 864/963-7405

4717 Jefferies Hwy Walterboro, SC 29488

843/539-1420Fax: 843/539-1424

3464 Sunset Boulevard West Columbia, SC 29169

803/794-9340Fax: 803/794-9346

178 Seaboard RoadAndrews, SC 29510

843/221-4940Fax: 843/221-4942

EquipmentCompany

t h e C O L O R o f Q U A L I T Y

new crop of Dash-5 excavators.See your Hitachi dealer today about the exciting

digging force, and lift capacities.running, greaterengines while maximizing your productivity with smooth-Be fuel efficient with clean-burning Interim T


digging force, and lift capacities.-than-ever horsepower greater r-than-ever horsepower

engines while maximizing your productivity with smooth-Be fuel efficient with clean-burning Interim T

Tier 4-certified


digging force, and lift capacities., arm force,-than-ever horsepower

engines while maximizing your productivity with smooth-ier 4-certified ning Interim T

engines while maximizing your productivity with smooth-ier 4-certified

.hitawwww.hitachiconstruction.com

new crop of Dash-5 excavators.

t h e C O L

.hitachiconstruction.com


A L I T Y


UO R o f Qt h e C O L

A L I T Y


chairman of the National Association ofHome Builders (NAHB) and a home builderfrom Gainesville, Fla. “This solid growth isan encouraging sign that housing continueson a slow but steady recovery path that isgradually advancing from one local marketto the next.”“More metros across the country are

experiencing a sustained uptick in houseprices, employment and new building activ-ity as rising consumer confidence in localmarket conditions pushes more people toconsider a new-home purchase,” observedNAHB Chief Economist David Crowe.“That said, overly tight lending conditionsfor builders and buyers continue to slow thisprocess considerably.”“Combined with recent positive reports

on builder confidence, housing starts andnew-home sales, the September IMI adds tothe growing consensus that housing is final-ly moving in the right direction, which inturn is spurring more potential buyers to getoff the fence,” added Kurt Pfotenhauer, vice

chairman at First American Title InsuranceCompany.The IMI is designed to track housing mar-

kets throughout the country that are showingsigns of improving economic health. Theindex measures three sets of independentmonthly data to get a mark on the topimproving Metropolitan Statistical Areas.The three indicators that are analyzed areemployment growth from the Bureau ofLabor Statistics, house price appreciationfrom Freddie Mac and single-family housingpermit growth from the U.S. Census Bureau.NAHB uses the latest available data fromthese sources to generate a list of improvingmarkets. A metropolitan area must seeimprovement in all three measures for atleast six months following those measures’respective troughs before being included onthe improving markets list.A complete list of all 99 metropolitan

areas currently on the IMI, and separatebreakouts of metros newly added to ordropped from the list in September, is avail-able at www.nahb.org/imi.

IMI Also Indicates More MetroAreas Show Signs of Recovery

HOUSING from page 1

AERIAL LIFTS

Manlifts

GRADALL / LULLSales - Service - Training

Modern EquipmentSales & Rental800-445-4381

ASPHALT EQUIPMENT

Asphalt Rollers

2007 Dynapac CA150D, 66inch, 20,000 lbs., soil roller,ROPS and vandal cover,very good condition, 91hours.....................$79,900.

847-437-8686

Milling Machines

2006 Dynapac PL2000, 80''planer, front loading convey-or, good condition, 3423hours ..................$189,900.2006 Dynapac PL500, 30''planer, 20'' drum, very goodcond, 2780 hrs.......$47,500.

Casey Equipment Co.847-437-8686

COMPACTION EQUIP.

Pneumatic Rollers

2006 Vibromax VM1500,33'' drum width, trenchroller, 23 hp, 3600 lb operat-ing wt., low hours. Picturesavailable.......................Call

908/625-0697

CRANES

Crane Inspections

ALL TYPES OF CRANESINSPECTED AND

CERTIFIED

Accredited by the USDept. of Labor Under29CFR Part 1919 and

Accredited by CALOSHA

Call 215-639-2579Atlantic Crane

Inspection ServicesVisit us at

www.atlanticcrane.com

EXCAVATORS

Hydraulic Excavators

NH ConstructionEquipment

New & UsedParts & Service


Mini Excavators




FORKLIFTS

Industrial Forklifts

GRADALL / LULLSales - Service - Training


Rough Terrain Forklifts

2010 JCB 930-4, canopymodel, 4WD, 6000 lb liftcapacity, 22 ' mast, 48''forks. Pictures available.Low hours ............$33,000.

908-625-0697

GENERATORS & GEN

SETS

Generators & Gen Sets

2008 Ingersoll Rand G290,290KVA, trailer mounted,like new, 300 hours..............................$55,000.

305-945-2581

LOADERS

Backhoe Loaders

JCB 3CX-14, fully loaded,4WD, Servo controls, pow-ershift trans., Extra- Dig,pipe work loader, 1.4 ys bkt& 21'' bucket, mint, lowhours ...........................Call

908-625-0697

Wheel Loaders




Track Loaders

2006 JCB 1110T, 84 turbocanopy model, new 17''tracks, Servo controls, hydpump (new), good condi-tion, 1100 hours..............................$32,500.

908-625-0697

TELEHANDLERS

Telescopic Handlers

2011 Case 586G, 4WD,straight mast, all terrainforklift, 16' mast, load con-trol, excellent cond., 5hours............................Call

800-432-0913

TRAINING

Operator Training

NCCCO Crane Operator Training

TowerRigger

Knuckleboom Crane

Signal Person

TRAINED AT YOURLOCATION

All trainers NCCCOCertified

Call 800-841-6189AtlanticCrane InpectionServicesVisit us

atwww.atlanticcrane.com

Are your operators compli-ant with Federal Standards,

OSHA, ANSI, ISO?

MODERN GROUP offers training for:

Front-end Loaders & Backhoes

Aerial work platforms (AWP)(Boom & Scissor Lifts)

Rough Terrain Forklifts (Gradall, Lull, JCB)

Skid Steer Loaders

For information, pricing orreservations:

Call 1-800-223-3827www.moderngroup.com

All prices include Trainer,travel and material

NO HIDDEN COSTS

TRENCHING EQUIPMENT

Trenchers

2009 Stone Bulldog TR34,new, unused, remote opera-tion, 34'' drums, 0 hours............................$28,500.

336-685-4998

Classified Rates:30 Words or Less for $30.00. Each Additional Word is 95¢.For just an additional $20 your ad can be posted on our online

searchable database for 30 daysAd runs for 2 (two) insertions - no changes in second insertion.

PLEASE ENCLOSE PAYMENT WITH ORDER and mail to - 470 Maryland DriveFort Washington, PA 19034

215/885-2900 • Fax 215/885-2910 • Toll Free 1-800/523-2200

CLASSIFIEDSSEE YOUR SEE YOUR

BARGAIN AD BARGAIN AD ININ COLOR.COLOR.

ONLY $50 EXTRAONLY $50 EXTRAFOR 2 INSERTIONS

The Easy Way To Advertise Your Equipment Valued At Less Than $1 Million Run In Two Consecutive Issues For $95

Here's how the BARGAIN ADS Work:• Supply us with a photo of a machine (one machine per Bargain Ad) and a maximum 20 word description, plus contact and phone number.

• Either email your copy & photo to: [email protected], or mail to: Construction Equipment Guide, 470 Maryland Drive, Ft Washington, PA 19034.

• Cost is $95 per ad, $50 additional for color.

• Your ad will run for two consecutive issues in 1 region.

Your Ad Will Be Seen By Over 24,273 Construction Equipment Buyersin the Southeast States.

For more information, call Construction Equipment Guide today at

800/523-2200

Prevent theft, vandalism, and unauthorized borrow-ing of your skid loaders! Lock both drive controls ofall skid loaders. Receive $50 off your Skidsteer Lockorder. Call or use coupon code CEGSSL at checkout.

The Equipment Lock CompanyVisit www.equipmentlock.com

or call toll free 1.866.Lok it up (565-4887) 20-21 AP


KOMATSU DOZERS | I AM LOOKINGFOR THE FOLLOWING USED KOMATSUDOZERS: D 6 5 D 8 5 D 1 5 5 EMAIL USWITH PICTURES, SERIAL NUMBER,YEAR MODEL, PRICE.CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected]––––––––––––––––––––––––––––––––BOBCAT BRAND SKID STEER LOAD-ERS LOCATED IN THE SOUTH EAST-ERN UNITED STATES | AM PAYINGCASH FOR BOBCAT BRAND SKIDSTEER LOADERS. ESPECIALLY LOOK-ING FOR LARGE FRAME AND "GOLDPACKAGE" MACHINES, BUT ANY MAKEAND MODEL BOBCAT WILL BE CONSID-ERED. PLEASE SEND PHOTO AND ASK-ING PRICE. ***DEALERS NEED NOTRESPOND***CONTACT: WARRENEMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU BR380JG1 & BR580 TRACKJAW CRUSHERS | LATE MODEL LOWHOUR WORK READY USA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––CATEPILLAR 3412 | HELLO I AM LOOK-ING FOR THE SPIDER ASSEMBLY ANDTHE SHAFT INPUT FOR THE 3412CATERPILLAR. THE SPECS ARE ASFOLLOWS: SERIAL # 60M03370ARRANGEMENT# 4N2247 CLUTCHDESCRIPTION: MODEL# GM518-1 SERI-AL # 3R5140 BOM# 37705 RATIO# 6.48:1I AM LOOKING FOR THEM NEW ORUSED.CONTACT: ROBIN MILLERPHONE: 7867525438EMAIL:[email protected]––––––––––––––––––––––––––––––––YANMAR EXCAVATORCONTACT: JOHN SARAPPAPHONE: 856 767 1122FAX: 856 767 4931EMAIL: [email protected]––––––––––––––––––––––––––––––––MAS HEAVY EQUIPMENT | LOOKINGFOR EXCAVATOR DAEWOO OR DOS-SAN 290 LCV/300LCV/420LCV/470LCVCATERPILLAR 235 C OR D /225 SAM-SUNG 280-2 WHEEL LOADER CATER-PILLAR 920-930-936-950-966D E F -970F966G -972G-980G-980F DOZER CATER-PILLAR D9N&D10N KOM. 355CONTACT: MODY SHOUKRYPHONE: 8155435252 FAX: 8153986715EMAIL:[email protected]––––––––––––––––––––––––––––––––HYDRAULIC DRIVE MOTOR FOR ADITCH WITCH 5020 TRENCHER |DESCRIBE WHAT YOU WANT.CONTACT: RICHARD SPRIGGSPHONE: 423-487-5048 EMAIL: [email protected]––––––––––––––––––––––––––––––––NEEDED FAST KOMASTU 155A X 6 2009WITH RIPPER USER LOW LOW HOURS INEED 2CONTACT: JEAN MAURICE BOUTINEMAIL: [email protected]––––––––––––––––––––––––––––––––

WE BUY EQUIPMENT MANUALS | WEBUY ALL KINDS OF CONSTRUCTION,FARM AND HEAVY EQUIPMENT MANU-ALS. I PREFER TO BUY 100 OR MOREMANUALS PREFERRABLY FROM BUSI-NESS COMPANIES. IF YOU’RE TIREDOF LOOKING AND STORING EXCESSMANUALS, PLEASE GIVE ME A CALL AT270-849-2270 OR EMAIL AT [email protected]. THANKS GRACECONTACT: GRACE FRANCESPHONE: 270-849-2270EMAIL: [email protected]––––––––––––––––––––––––––––––––WATER TRUCK | NEED USED WATERTRUCK. 10, 000-15, 000 CAP. MINE SITESPEC IF POSSIBLECONTACT: ROB KOHLERPHONE: 0411277332EMAIL:[email protected]––––––––––––––––––––––––––––––––LEFT REAR PLANATARY FOR CASE721C | DESCRIBE WHAT YOU WANT.CONTACT: J. R. WALLINPHONE: (281) 844-8489FAX: (979) 921-0020EMAIL:[email protected]––––––––––––––––––––––––––––––––FT REAR PLANATARY FOR CASE 721CCONTACT: J. R. WALLINPHONE: (281) 844-8489FAX: (979) 921-0020EMAIL:[email protected]––––––––––––––––––––––––––––––––NEEDED BULLDOZER D7H FROM EASTCOAST USER I NEED 3CONTACT: JEAN MAURICE BOUTINPHONE: 1-450-346-8975EMAIL:[email protected]––––––––––––––––––––––––––––––––BOMAGCONTACT: KENNYEMAIL: [email protected]––––––––––––––––––––––––––––––––ANY TRACK MACHINE CONSIDEREDCONTACT: DAYNAPHONE: 832-603-2097EMAIL: [email protected]––––––––––––––––––––––––––––––––DUSTLESS BLASTER MODEL DB500CONTACT: MICHAELPHONE: 314-796-6558EMAIL: [email protected]––––––––––––––––––––––––––––––––( 3 ) CAT 769C OR TEREX R50 OR CAT773B TRUCKS | WORK READY TRUCKS,MIDWEST LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––TEREX TA30 GEN 7 OFF ROAD TRUCKS| (2 ) 2007-2008 TRUCKS, MAX. 3500HOURS, CLEAN WORK READY, USALOCATIONCONTACT: RICHARDPHONE: 603-828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––SCAFFOLDS, STAGE SWINGS, CEMENTMIXERSCONTACT: GILROY ALBURYPHONE: 242-468-4488EMAIL: [email protected]––––––––––––––––––––––––––––––––

BOBCAT BRAND SKID STEER LOAD-ERS LOCATED IN THE SOUTH EAST-ERN UNITED STATES | AM BUYINGBOBCAT SKID STEER LOADERS, PRE-FER LARGE FRAME MACHINES AND"GOLD PACKAGE" UNITS, HOWEVERANY BOBCAT SKID STEER LOADERWILL BE CONSIDERED. SEND PHOTOSAND ASKING PRICE.***DEALERS NEED NOT RESPOND***CONTACT: WARRENEMAIL: [email protected]––––––––––––––––––––––––––––––––SERVICE MANUAL FOR CAT 303C CRCONTACT: KEVIN SANSALONEPHONE: 856-297-4758EMAIL:[email protected]––––––––––––––––––––––––––––––––NEED ALL 12 MONTHS BULLDOZER D3AT D10 FROM USER USA INSPECTIONBULLDOZERCONTACT: JEAN MAURICE BOUTINPHONE: 1 450 346 8975EMAIL:[email protected]––––––––––––––––––––––––––––––––USED EXCAVATOR PART | SWINGMOTOR FOR A JOHN DEERE 690CEXCAVATOR IT IS A COMMERCIALINTERTECH #323-9210-011 JD PART #AT77614CONTACT: LOREN LINDLPHONE: 920.650.3870EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU D51EX22 TRACK DOZER | AIRCAB, 1000 +/- HOURS, USA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––CASE 580 LOADER BACKHOES |MODEL 580 K SK L SL M SMSCONTACT: FRANK, TRICO EQUIPMENTPHONE: 800-654-USED (8733) EXT. 1230FAX: 732-780-3618EMAIL:[email protected]––––––––––––––––––––––––––––––––MULCHER 250350 H/P | 2005-2007 BRONLH 250-400 MULCHERCONTACT: DARSENPHONE: 9174406319FAX: 9174406319EMAIL:[email protected]––––––––––––––––––––––––––––––––CONSTRUCTION EQUIPMENT | FAIRLYUSED: 1) 950 & 966 CAT 2) COMPACTOR(DRUM & TIRE) 3) BULLDOZER (D6) CAT4) LOW BED 5) MACK TRUCKS (2003-2005...)CONTACT: MONTYPHONE: 646-515-7645FAX: 718-887-8575EMAIL:[email protected]––––––––––––––––––––––––––––––––FOREST EQUIPMENT | BRUSH FORKSCONTACT: DENNIS TRUJILLOPHONE: 505 617 0211EMAIL: [email protected]––––––––––––––––––––––––––––––––LARGE EXCAVATOR | ANY BRAND,PREFERABLY GOOD TO VERY GOOD.CONTACT: DON JOHNSONPHONE: 218 784 8301FAX: 218 784 7569EMAIL:[email protected]––––––––––––––––––––––––––––––––

SANDVIK TITON DI 600 | LOOKING FORA SECOND HAND SANDVIK TITON DI600, FROM YOM 2005 UPWARDS, INGOOD CONDITIONCONTACT: ALIDADPHONE: 004916098648980EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR THE FOLLOWING USEDKAWASAKI LOADERS. 5 0 Z-II, 5 0 Z-IV,5 0 Z-V 6 0 Z-II, 6 0 Z-IV, 6 0 Z-V 6 5 Z-II,6 5 Z-IV, 6 5 Z-V 7 0 Z-II, 7 0 Z-IV, 7 0 Z-V8 0 Z-II, 8 0 Z-IV, 8 0 Z-V 8 5 Z-II, 8 5 Z-IV,8 5 Z-V 9 0 Z-II, 9 0 Z-IV, 9 0 Z-V 9 5 Z-II,9 5 Z-IV, 9 5 Z-VCONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected]––––––––––––––––––––––––––––––––305 CAT EXCAVATORCONTACT: SOLOMON JACKPHONE: +447024065565EMAIL:[email protected]––––––––––––––––––––––––––––––––MOTOR GRADER 140G KOMATSUCONTACT: LEONARD MKUMBIPHONE: 0754561164FAX: 0263121EMAIL:[email protected]––––––––––––––––––––––––––––––––WE ARE LOOKING FOR A 35-45 TONGROVE ROUGH TERRAIN CRANECONTACT: HAENER CRANE &EQUIPMENTPHONE: 1-800-746-8106EMAIL: [email protected]––––––––––––––––––––––––––––––––I AM LOOKING FOR 2 SULLAIR AIRCOMPRESSORS IN GOOD GOODWORKING CONDITION. 2000-2003, 750CFM, 150 PSI, AFTERCOOLED AND FILTERED, CAT DIESEL 3306,PORTABLE HIGHWAY TRAILERCONTACT: PEDRO LIPHONE: 323-707-6063EMAIL: [email protected]––––––––––––––––––––––––––––––––NEEDED BULLDOZER D4H D5H D6HLOW LOW HOURS USER LGP ORSTRAIGHT PADS USA USERCONTACT: JEAN MAURICE BOUTINPHONE: 1-450-346-8975EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU BR380 JG1 TRACK JAWCRUSHER • LATE MODEL, LOW HOUR,USA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––KOBELCO SK80 SK135 PARTS • I NEEDA FRONT WINDOW FRAME, GLASS ANDHARDWARE FOR A KOBELCO SK80 -SK135CONTACT: MICKPHONE: 352-270-0070EMAIL: [email protected]––––––––––––––––––––––––––––––––DYNAHOE MODEL C BACKHOE • PLAN-ETARY ASSEMBLY AND DRIVE AXLENEEDED TO REPLACE STOLEN PARTSCONTACT: WILLIAM CRAIBPHONE: 518-658-2639EMAIL: [email protected]––––––––––––––––––––––––––––––––

USED LEFT DOOR FOR 2004 KUBOTARTV900 2004 MO HARD DOOR.CONTACT: P SMITHPHONE: 203-586-8712EMAIL: [email protected]––––––––––––––––––––––––––––––––HYDRAULIC HAMMER/ DROP HAMMER• WTB WORKING OR NON WORKINGHAMMERS ANY SIZE LARGE OR SMALLNO DEALERS PLEASECONTACT: JAMES MANNPHONE: 404-273-9424FAX: 770-306-2962EMAIL: [email protected]––––––––––––––––––––––––––––––––53X102 DROP DECK FLATBED • 53X102"AIR RIDE, AIR SPREAD, ALUMINUM/STEEL COMBO OR ALL STEEL DROPDECK FLATBED. MUST HAVE RECENTDOT INSPECTION. PREFER TELE-PHONE CONTACT @918-351-4646.CONTACT: IANPHONE: 918-351-4646EMAIL: [email protected]––––––––––––––––––––––––––––––––QUICK CONNECT FOR 305 CAT EXCAVATORCONTACT: JAKE DERRPHONE: 609-868-8759FAX: 856-845-5012EMAIL: [email protected]––––––––––––––––––––––––––––––––NEED TO BUY THE FOLLOWING CATMOTOR GRADERS: 140G (1989, 1994,1995, WITH RIPPER) 140H (2000-2002)14G/H (1972 UP)CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL: [email protected]––––––––––––––––––––––––––––––––**WANTED** BOBCAT SKID STEERLOADERS AND MINI EXCAVATORS | AMINTERESTED IN BUYING BOBCATSLOCATED IN THE S.E. UNITED STATES.PREFER LARGE FRAME MACHINESS320, S300, S250, T320, T300, T250.PREFERENCE GIVEN "GOLD PACK-AGE" MACHINES BUT ANY SIZE BOB-CAT WILL BE CONSIDERED. PLEASESEND RECENT PHOTO AND ASKINGPRICE. DEALERS NEED NOT RESPOND.CONTACT: WARRENEMAIL: [email protected]––––––––––––––––––––––––––––––––WOOD CHIPPERCONTACT: SCOTTPHONE: 516-509-0335FAX: 631-998-3897EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING FOR USED STREETPRINTINFRARED HEATERS, STREET HEATTHEY ARE CALLEDCONTACT: PAUL POLITOPHONE: 1-520-292-1125EMAIL: [email protected]––––––––––––––––––––––––––––––––LOOKING TO PURCHASE THE FOLLOW-ING CATERPILLAR WHEEL LOADERS.930 (1978-1986) 936 (1984-1992) 938G(AROUND YEAR 2005) 950B/E/G (1984 UP,FULL STEERING) 966C/D/E/F-II/G (1979UP, FULL STEERING) 980C/F (1988 UP)CONTACT: AIMN BLBOLPHONE: +971504814823FAX: +97165355291EMAIL:[email protected]––––––––––––––––––––––––––––––––

TRANSMISSION ASSEMBLY | WE ARELOOKING FOR A TRANSMISSIONASSEMBLY SUITABLE THE FOLLOWINGMITSUBISHI 330 MOTOR GRADER. THEINFO AVAILABLE FOR THE MOTORGRADER IS AS UNDER. SERIAL # OFGRADER MG003231, ENGINE SERIAL #75761, MACHINE # 3QA00515, TRANS-MISSION # 60325 - 80111, MODEL 3-5-93CONTACT: ANIS SHERWANIPHONE: +923214696007FAX: +92 42 35887118EMAIL: [email protected]––––––––––––––––––––––––––––––––MINI EXCAVATOR | SMALL MINI EXCA-VATOR FOR PERSONAL USE AT HOMENOT FOR BUSINESSCONTACT: TIM HAWKINSEMAIL: [email protected]––––––––––––––––––––––––––––––––BACKHOE ATTACHMENT FOR JD 401DTRACTOR. J D MODEL # FOR HOE IS9250ACONTACT: MARK BEYERPHONE: 707 538 0413EMAIL: [email protected]––––––––––––––––––––––––––––––––SPECIALLY CAT MANUAL WHEELLOADER | REGULAR REQUIREMENT OFMENTIONED MACHINES. (WE BUY FOROUR OWN STOCK TIME TO TIME) MAR-KET MEET MACHINERY: CAT 910, 920,930, 950, 950B, E & 966D, E AND 966F.CAT GRADER 140G S/N:10, 000 UP.DYNAPAC ROLLERS CA251D, CA262D,CA301D [PAD FOOT TYPE ALSO WORKS]JCB TELEHANDLER 550 1999~2005HITACHI EXCAVATOR EX200-1,EX100WD-1, EX60WD-1, UH07-7, UH083KOMATSU EXCAVATOR PC 200-6, -7. CONTACT: IKRAM KHANPHONE: +923002831078EMAIL:[email protected]––––––––––––––––––––––––––––––––LOOKING FOR D10N OR D10R WITHBAD OR NO ENGINE.CONTACT: J. R. WALLINPHONE: 281-844-8489FAX: 979-921-0020EMAIL: [email protected]––––––––––––––––––––––––––––––––KOMATSU BR380 JG1 TRACK JAWCRUSHER | LATE MODEL, LOW HOUR,WORK READY. USA LOCATIONCONTACT: RICHARDPHONE: 603 828-6100EMAIL: [email protected]––––––––––––––––––––––––––––––––325, 330, CL, BL | I NEED DOZER D7G,D8K, D6H, D6R WITH RIPPERS I NEEDLOT OF OTHER EQUIPMENT, PLEASEEMAIL ME COMPLETE LISTCONTACT: ISMAIL USMANPHONE: 4094541576EMAIL: [email protected]––––––––––––––––––––––––––––––––DOZER | 5 UNITS D5B DOZERS, CABOR OROP, 5 UNITS OLD 930 WHEELLOADERS, 2 X 730 TRUCKS UP TO10,000 HOURS.CONTACT: JEFF WILLISONPHONE: 918-449-1966EMAIL: [email protected]––––––––––––––––––––––––––––––––

Attention Contractors!Post Your Wanted To Buy Listings FREE!

Here’s How! List Your Wanted ItemsIf you would like to place your Wanted To Buy listings on our website

for inclusion in our newsletters, simply visit: www.ConstructionEquipmentGuide.com/wanted and enter your listings.


ALEX LYON & SON

AUCTIONEERS

www.lyonauction.com

315-633-2944�

• Detroit, MIFri.,�October�5,�2012For:�ConstructionEquipment,�Trucks,Trailers,�Support

• Boston, MASat.,�October�6,�2012For:�Major�Job�CompletionAuction

• Houston, TXThurs.,�October�11,�2012For:�ConstructionEquipment,�Aerials,Forklifts,�Large�WaterPumps

• Sacramento, CASat.,�October�13,�2012For:�ConstructionEquipment,�Trucks�andTrailers

• Odessa, TXSat.,�October�13,�2012For:�ConstructionEquipment,�Trucks,Trailers,�Support

• Putney, VTSun.,�October�14,�2012For:�Complete�LiquidationSanta’s�Land�AmusementPark

• Baltimore, MDThurs.,�October�18,�2012For:�Construction,�AsphaltEquipment�and�Trucks

• Kissimmee, FLWed.,�October�24,�2012For:�ConstructionEquipment,�Support,Attachments,�Aerial�andForklifts

• Portland, ORThurs.,�October�25,�2012For:�ConstructionEquipment,�Support,Trucks�and�Trailers

• Cobleskill, NYSat.,�October�27,�2012For:�ConstructionEquipment

• San Bernardino, CAFri.,�November�2,�2012For:�Construction,�Aerials,Support�and�ServiceTrucks

• Syracuse, NYSat.,�November�3,�2012For:�Late�Model�RentalFleet�ConstructionEquipment

• Racine, WISat.,�November�10,�2012For:�Late�ModelConstruction�and�SupportEquipment

• Houston, TXTues.,�November�13,�2012For:�ConstructionEquipment,�Forklifts,Aerial�Lifts,�Trucks�andTrailers

• Barranquilla, ColumbiaSat.,�November�24,�2012For:�Late�ModelConstruction�and�SupportEquipment

• Kissimmee, FL

Sat.-Sun.,�February�2-10,

2013

For:�Annual�9�Day

Auction!�Construction

Equipment,�Trucks,

Trailers,�Support

RITCHIE BROS.

AUCTIONEERS

www.rbauction.com

402-421-2631

• Hartford, CT

October�4,�2012

• El Paso, TX

October�10,�2012

• Chicago, IL


• Sacramento, CA


• Moultrie, GA


• Tipton, CA


• Northeast, MD


• Orlando, FL


• Pittsburgh, PA

November�8,�2012

• Atlanta, GA

November�29,�2012

CAT AUCTION SERVICES

www.catauctions.com

866-750-9432�

• ONLINE ONLY


For:�Construction

Equipment

• Gallup, NM


For:�Construction/Mining

Equipment

• Richmond, VA


For:�Construction/Mining

Equipment

• Denver, CO


For:�Construction

Equipment

DARELL DUNKLE

& ASSOCIATES

AUCTIONEERS INC.

www.dunkleauctioneers.com

�800-433-6670

• Harrison, MI

Thurs.,�October�5,�2012

For:�Fall�Contractors

Auction

DAVIS AUCTIONS

www.davisauctionsinc.com

�203-758-4087

• Prospect, CT


For:�Construction

Equipment

• Prospect, CTDecember�8,�2012For:�ConstructionEquipment

DEL PETERSON

& ASSOCIATES

www.delpeterson.com

�800-492-9090

• Online Only

Closing�October�23,�2012

For:�Construction

Equipment,�Trucks�&

Trailers

• Online Only

Closing�November�20,

2012

For:�Construction


Trailers

• New Ross, IN

Thurs.,�December�6�2012

For:�Farm�Equipment

• Online Only

Closing�December�18,

2012

For:�Construction


Trailers

• Online Only

Closing�February�5,�2013

For:�Late�Model�John

Deere�Farm�Equipment

HUNYADY

AUCTION COMPANY

www.hunyady.com

�800-233-6898

• Sewickley, PA


For:�Complete�Liquidation

Penfield�Contracting

• Wind Gap, PA

Wed.,�October�24,�2012

For:�Late�Model,�Off

Lease�Equipment

• Hellertown, PA

Wed.,�November�7,�2012


Valley�Excavating�&

Paving�Inc.

INSIGHT AUCTIONEERS

www.insightauction.com

�863-386-1225

• Sebring, FL

Sat.,�November�10,�2012

For:�Farm�and

Construction�Equipment

Auction

IRAY AUCTIONS

www.iraymn.com

�320-968-7230

• Foley, MN

Fri.,�November�30,�2012

IRON PLANET AUCTIONS

www.ironplanet.com

�888-433-5426

ONLINE�AUCTIONS

Go�to�www.ironplanet.com

to view the complete auc-

tion schedules, inspection

reports and to place your

bid!

• ONLINE ONLYOctober�4,�2012For:�ConstructionEquipment

• ONLINE ONLYOctober�10,�2012For:�ConstructionEquipment• ONLINEONLYOctober�11,�2012For:�ConstructionEquipment




ITL AUCTIONEERING

www.itlauctions.us

508-824-3262

• Taunton, MASat.,�October�20,�2012For:�ConstructionEquipment

KEENAN

AUCTION COMPANY

www.keenanauction.com

207-885-5100

• Scarborough, METhurs.,�October�11,�2012For:�ConstructionEquipment,�Screeners,Dump�Trucks�&�Vehicles

MARTIN & MARTIN

AUCTIONEERS, INC.

www.mmaauction.com

�800-763-2728

• Starkville, MSSat.,�October�6,�2012For:�Forestry�Equipment

• Pelzer, SCWed.,�October�17,�2012For:�Construction�andFarm�Equipment

• Brooklyn, MSSat.,�October�20,�2012For:�ConstructionEquipment,�Trucks,Trailers�and�Tools

• Bristol, VA


For:�Construction


Trailers�and�Tools

• Mt. Hope, WV


For:�Construction

Equipment,�Trucks�and

Trailers

• Danielsville, GA

Fri.,�November�2,�2012

For:�Construction�and

Farm�Equipment

MEEKINS AUCTION

COMPANY

www.meekinsauction.com

�800-499-6560

• Lumberton, NC


For:�Construction

Equipment

• Wilson, NC

Thurs.,�January�31,�2013

For:�Construction

Equipment

MOTLEY’S AUCTION

& REALTY GROUP

www.motleys.com

�804-232-3300

• Richmond, VA

Fri.,�October�12,�2012

For:�Construction

Equipment�and�Trucks

MYRON BOWLING

AUCTIONEERS, INC.

www.myronbowling.com

�513-738-3311

• Eden, MD



American�Paving�Corp.

PETROWSKY

AUCTIONEERS INC.

www.petrowskyauctioneers.com

�860-642-4200

• Newark, NJ


For:�Heavy�Construction,

Bridge�&�Road�Rehab

Equipment

• Columbus, OH



Paving�Equipment

• Moosup, CT


For:�Construction


Trailers

PURPLE WAVE AUCTION

www.purplewave.com

�866-608-9283

• ONLINE ONLY

Tues.,�October�9,�2012

For:�Government

Equipment

• ONLINE ONLY


For:�Construction

Equipment

• ONLINE ONLY

Tues.,�October�25,�2012

For:�Construction

Equipment

QUARRICK EQUIPMENT

& AUCTIONS INC.

www.josephfinn.com

�724-439-1621

• Uniontown, PA



Farm�Equipment

ROY TIETSWORTH

AUCTIONEERS

www.tietsworth.com

�585-243-1563

• Rochester, NY

Sat.,�October�6,�2012

For:�Municipal/Contractor

Auction

SALES AUCTION

COMPANY, LLC

www.salesauctioncompany.com

�860-627-7506

• Windsor Locks, CT


For:�Construction


Trailers

STEFFES

UCTIONEERS INC.

www.steffesauctioneers.com

�701-237-9173

• Online Only

October�1-9,�2012

For:�Construction, Ag,

Trucks & Vehicles

• Online Only

November�1-12�2012

For:�Construction, Ag,

Trucks and Vehicles

• West Fargo, ND

Wed.,�November�28�2012

For:�Construction and

Farm Equipment

TAYLOR AUCTION

& REALTY, INC.

www.taylorauction.com

662-226-2080

• Grenada, MS


For:�Annual�Fall�Auction

THE AUCTION COMPANY

www.theauctioncompany.net

951-657-5300�

• Southern CA


For:�Construction


Trailers

• Northern CA


For:�Construction

Equipment,�Trucks,�Govt.

Vehicles

• Northern CA


For:�Construction


Vehicle

• Southern CA

Sat.,�December�8,�2012

For:�Construction


Trailers

• Northern CA

Sat.,�December�15,�2012

For:�Construction


Vehicles

UNITED AUCTIONEERS

& APPRAISERS

www.uaa-auctions.com

�517-202-9173

• Charlotte, MI


For:�Delta�Electrical

Contractors

• Wilmington, DE


For:�Construction�&�Utility

Equipment

UTILITY AUCTIONS

www.utilityauctions.net

�302-530-9103

• Charlotte, MI


For:�Commercial/Industrial

YODER & FREY

AUCTIONEERS, INC.

www.yoderandfrey.com

�419-865-3990

• Lenox, MI


For:�Construction

Equipment,�Trucks

Tractors,�Gravel�Trains�&

Trailers

WESTERN

CONSTRUCTION

AUCTIONS INC.

www.wca-online.com

�760-731-7760

• Perris, CA


For:�Heavy�Equipment

AuctionsComing


Online Auctions

California Auction Company Bond #70259785. Preliminary list to date. Equipment subject to change. Copyright © 1999-2012 IronPlanet, Inc. All Rights Reserved. IronPlanet®, IronClad Assurance® and Auctions you can trust® are registered service marks of IronPlanet, Inc. All other marks and brands are the property of their respective owners.

Call 855-685-5491 to add your equipment to these online auctions for faster, more profitable sales than traditional auctions.

A better way to sell your equipment

2004 CAT CS-563E

2010 TOYOTA 8FGCU25

CAT 621B

2000 JOHN DEERE 310E 4X4

2009 CAT 297C

CAT 992C

1998 CAT 963B LGP

2008 CAT D6K LGP

KOMATSU PC400LC-5L

CAT 14G

2005 JLG 3369LE

TEREX R35B

SUN MON TUE WED THU FRI SAT

October Auctions

1 2 3 4 5 67 8 9 10 11 12 13

14 15 16 17 18 19 2021 22 23 24 25 26 2728 29 30 31

Online A

wwww.iructionsOnline A

onplanet.com.irw.iructions

onplanet.comuctions

OYOT2010 T

8FGCU25AOTTA

297CT2009 CA AT

D6K LGPT2008 CA AT

D6K LGP

2005 JLG 3369LE

2004 CA

CS-563ET CA AT 2000 JOHN DEERE 310E 4X4

2000 JOHN DEERE 310E 4X4

963B LGPTT 963B LGP1998 CA AT

963B LGP

14GTCAAT

Call 855-685-5491 to add y

A better w

our equipment to these online auctions Call 855-685-5491 to add y

y to sell yaA better w

621BTCAAT

our equipment to these online auctions

our equipmenty to sell y

992CTT 992CCAAT

our equipment to these online auctions

our equipment

TSU PC400LC-5LKOMAA

SUN

TSU PC400LC-5L

SUN MON TUE WED THU FRI

uc AreobtcO

1 2 3 4

TEREX R35B

FRI ATS

snoituc

5 6

y Bnapmon Coitcua AinrofilaCr mehtl ol. Acn, ItenalPnorf Io

Call 855-685-5491 to add y, m or faster r, more profitabf

i.www

empiuq. Eetao dt tsiy lranimiler. P58795207d #noy Bitcepser riehf ty otrepore phe trs adnard bns akrar m

our equipment to these online auctions Call 855-685-5491 to add yle sales than traditional auctions, more profitab

oct.enalponr

Pnor2 I102-999t © 1hgirypo. Cegnaho ct tcejbut sne.srenwe ov

our equipment to these online auctions le sales than traditional auctions

mo 568-55 8

tenalPnor. Idevreses Rthgil Rl. Acn, ItenalP ® alCnor, I

our equipment to these online auctions .le sales than traditional auctions

194-55

7142128

ecnarussd Aa ® tsurn tau cos ynoitcud An a ® ige rer a

3 47 8 9 10 11 12

14 15 16 17 18 1921 22 23 24 25 2628 29 30 31

ksra meciv serdeerts

5 612 1319 2026 27


JM Wood Auction Holds Multi-Day Sale in Montgomery

Looking over a Komatsu PC 200LC are Mike Gunn(L), Carrville Gin Company, Tallassee, Ala., andTommy Burton, independent contractor, also basedin Tallassee, Ala.

A trio of nice-looking Hitachi 350 Zaxis excava-tors were in the sale lineup.

Checking under the hood of a Deere dozer ofinterest are Henry Lynn and Joey Cauthen,Regional Electric, Montgomery, Ala.

A long way from home and making the mostof his inspection time is Corey Cossey, W.A.Rasic Construction, Long Beach Calif.,checking out a Deere 624J wheel loader.

Three Cat 725 trucks rolled onand off the ramp rather quick-ly as one buyer snagged all three of them for $160,000 each.

(L-R): Philip Parker and Trip Pittman of Pittman Tractor,Daphne, Ala., discuss some machines of common interestwith Wayne Eldridge of J & W Marine, Bayou La Batre, Ala.

Test operating a Deere 450J LGP is David Moore,Construction Equipment Rental and Sales, Jackson,Tenn.

Taking a moment to discuss what’s going on in the world (L-R) areBuddy Hughes, Hughes Air Conditioning, Millbrook, Ala; RichardReid, Southern Excellence, Millbrook, Ala.; and Grady Willett, TripleW Construction, Altoona, Ala.

JM Wood Auction Company Inc.’s multi-daysale at its headquarters in Montgomery, Ala.,held on Sept. 12 and 13, was another huge suc-

cess for this year.Company representatives stated that there were

bidders from 15 countries and 34 U.S. states whopurchased more than $17 million of equipment.High on the list of items in demand were several2008 Cat 725 trucks from a Cat dealer rental fleetand a number of 2012-2009 Mack GU713 tri-axeldumps from numerous government agencies.“We had contractors from across the country

here at the auction bidding on and buying equip-ment,” said Vice President Bryant Wood. “Wehave been sending a lot of equipment overseas forthe last 36 months, but contractors from across thecountry are coming to the auctions because theyare at a point where they need to update their fleetsor reposition their fleets to the work they havegoing on. It’s very encouraging to see some ofthese contractors here at the auction whether theyare buying equipment or not, they are bidding onit…and that’s what we all want to see.”



Alex Lyon & Son, Martin & MartinJoin for Sept. Auction in Bremen, Ga.

Joey Martin (L), Martin & MartinAuctioneers, and Jack Lyon, Alex Lyon &Son, scan the crowd for one final bid on abackhoe loader.

Local contractor Wayne Cole (L), Temple, Ga., and Edward Rude, TMTrading, Falling Waters, W.Va., swap notes about the dozers in the sale.

The smaller dual drum Bomag rollers were a comfortable restingspot for Bobby and Deborah Miles, Texas Skid Steer, Springtown,Tex., as they wait for the skid steer auctioning to begin.

It was a picture perfect September day in Georgia anda nice turnout for the sale.

Discussing some of the Cat machines thatwere about to go on the block are JohnGorham (L), Yancey Bros. Co., Austell, Ga.,and Brian Wilson, independent equipmentdealer in Atlanta.

Watching the bidding are J.R. Atkinson, Jr. (L), J &J Truck Sales, Dry Fork, Va., and Lee Mashburn,Mashburn Equipment, Ringgold, Ga.

Phoning his office in NewYork while jotting somenotes on a JCB Loadall ofinterest is Mike Montanoof Montano EquipmentSales and Rentals,Saugerties, N.Y.

The father and son team of John (L)and Stephen J. Connolly, ATSEquipment Inc., journeyed fromNew England to see if they couldsnag some deals at this sale.

Inspecting one of the three Takeuchi TL130s in the saleis Zak Zakeri, AutoMaster, Lawrenceville, Ga.

Ajoint venture of Martin & Martin Auctioneers & Alex Lyon & SonAuctioneers resulted in another successful auction west of Atlanta inBremen, Ga., on September 19.

The sale was a one-owner complete liquidation of construction equipment,trucks, trailers, support equipment and featured a substantial paving and com-paction line up of machines.


Day 1 Fri., October 12 @ 9AM

Day 2 (Online Only)Support Equipment

Commonwealth of VA, Sunbelt Rentals

Bid October 8 - October 13

Bidding Closes October 13Beginning @ 10AM

Must Register With ProxibidBidding Now Open! Bid at Home, WiFi

On-Site, Use our Bidding Station

or Absentee Bids Accepted!

Accepting Items DailyThrough 10/10.

Sell Your Idle Assets Now!

Annual Fall AuctionSat., Oct. 13th • 10:00 am

Dozer / Backhoes: 1989 Caterpillar D4C Dozer;1989 Case 580 K Backhoe; 2003 New Holland 555EBackhoe; 2000 New Holland LB75 4WD; 1992 Case580 SK Backhoe; 1998 New Holland 555 E Backhoe;1997 New Holland 555 E BackhoeExcavators: 2000 Linkbelt 2650; 2001 Bobcat325; Yanmar 27 Mini ExcavatorTelescopic Lifts: 1999 Manitou MTV 1130 Lift;2000 Genie 245/25, 4WD, Basket Man Lift; 1999 Lull644B-42 Lift; Gradall 534 C 4WD Telescopic Lift;Genie 40-49 4WD Platform Boom Lift; 1996 JLG 4 WDUtility Tractors: 2003 New Holland TC 30;Kubota L2900; Kubota L3010; Ford 1720Utility Trailers: 1994 DC Utility; 1996 Michell;1996 Shop Built 7’ x16; 2001 Enclosed, 7’ x 18’;1989 Pace 6’ x10’ Enclosed; 1998 McGraws 7’ x 16’;1999 Pipe 7’ x 16’ Flat; (2) 2003 C & W Enclosed, 6’x 16’; 1996 Utility 53’ Van Trailer; 1996 Great Dane53’ Van Trailer; Strick 53’ Van TrailerJob Office Trailers: (2) Single Axle Job SiteStorage / Office; 1991 G & S Modular Office Building/ Portable; 1991 G & S 8’ x 32’ Office Complex;

G & S Storage Unit / Portable; Modular Space JobTrailer; Mobile Office TrailerSupport Equipment: Pressure Washers, LaserEquipment, Generators, Hand Tools, Guard Fencing,Scaffolding, Fuel Tanks, Extra Backhoe Buckets City of Grenada: John Deere 6405 tractor withTiger side boom mower & John Deere MX8 rearbushog; Tractor; 1997 Ford F-Series Dump Truck;International Truck and Tymco Sweeper; MauldinSteel Wheel Roller; 1989 Ford F-350 Truck withbucket lift; 1988 Ford L-8000 Diesel Sewer Truck;Mack Tandem Axle Dump Truck; 1993 Mack FlatBed; 1997 Ford F-Series Dump Truck; CaterpillarD3B Dozer; 1990 International Bucket Truck; AsphaltLeeboy Paver / Model # L1000T; Caterpillar D6MDozerDRUG SEIZURE ITEMS!! 6 vehicles from DrugSeizure; Search and Rescue Boat- Steel Hull Inboard Bank Equipment (ABSOLUTE): CASE MX 210MFWD with Creeper Gear; CASE 450 CT Skid Steer;1985 Ford LT9 Dump Truck; 1986 Pintle HitchLowboy Trailer; 1986 Caterpillar D3B Dozer; 2001Case 850 G Dozer

15488 Hwy. 51 North Grenada, MS 38901

Live/Simulcast Auction. Visit www.taylorauction.com to view catalog

10% BUYERS PREMIUM

TAYLOR AUCTION & REALTY, INC.BENNY & RUTHIE TAYLOR • MS Lic. #176

15488 Hwy. 51 North Grenada, MS 38901 - 1.662.226.2080 OR 1.662.417.0397


Ritchie Bros. Holds Multi-Million Dollar Sale in Atlanta

The ringmen at the ramp make quickwork of selling a package of five

Komatsu WB 140 backhoes.

Thompson Tractor representatives from Montgomeryand Birmingham, Ala., Jason Garrison (L) and his son,Dakota, and Billy Seals were out in full force to monitorthe auction pricing at the Ritchie Bros. Atlanta area sale.

Testing a Komatsu PC138 US excava-tor is Scott McEver, H&R ConstructionParts, Lawrenceville, Ga.

Doing a final Komatsu dozer test beforeheading to the theater area is Tim Thomas,Tractor & Equipment Co., Birmingham, Ala.

Deep in discussion about an Etnyre distributor in the sale lineup areSteve Meissen (L), Reynolds-Warren Equipment Company, Lake City,Ga., and Spencer McCroskey, Sunbelt Asphalt, Atlanta.

Taking a good look at the power plant of a Cat 375L is LukeCopeland, Cope Equipment, Jasper, Ga..

Making thetrek to Atlantaspecifically toinspect andbid on a Cat939C modelcrawlerloader isDuncan Kelly,PlantationFarms,Carthage, N.C.

A hint of things to come. Perry Taggart (L), C.A. MurrenContractors & Engineers, Grayson, Ga., and his RitchieBros. representative Alex Wood stand in front of a nicepackage of C.A. Murren machines, including a Manitowoc555, which will go on the auction block in Newnan, Ga., inNovember.

More than 1,400 bidders participated online and in person atRitchie Bros. Auctioneers’ multi-million dollar unreservedpublic equipment auction in Atlanta on Sept. 20.

Bidders came from 48 countries, including 45 U.S. states. Close to80 percent of the equipment was sold to out-of-state buyers, from asfar away as Australia, Colombia and Indonesia. Online bidders pur-chased close to 38 percent of the equipment sold (by dollar value). In total, more than 1,000 equipment lots were sold in the auction,

including loader backhoes, hydraulic excavators, crawler tractors,multi-terrain loaders, wheel loaders, articulated dump trucks, trucktractors and more.


DELAWARE CONTRACTORS ASSOCIATION EVENTS:WEDNESDAY, OCTOBER 24, 2012 – Delaware Contractors Association’s43rd Annual Meeting. This premier event of the Association’s calendaryear is again being held at the Chase Center on the Riverfront and GuestSpeaker will be Mike Schmidt. Cocktails: 5:00 PM (open bar & horsd’oeuvres); Dinner: 6:00 PM. Reservations are $125.00 per person forthe entire evening. No cancellations will be accepted after 12:00 Noon onWednesday, October 17, 2012. Michael Jack Schmidt is a Hall of Famethird baseman, and is widely considered as one of the greatest at thatposition in the history of Major League Baseball. He played his entirecareer for the Philadelphia Phillies and was the National League MVP in1980, 1981 and 1986. If you are interested in becoming a sponsor ofthis event which entitles you to attend a private cocktail reception withMike, and to register for this event, please contact Marla DiSalvo atDelaware Contractors Association, P. O. Box 6520, Wilmington, DE.Telephone: 302/994-7442, Fax: 302/994-8185, or Email Marla [email protected].

Minnesota Nursery & Landscape Association (MNLA) – SuccessfulBusiness Grow Here!2012 EVENTS CALENDAR:Wednesday, October 3rd - ISA CERTIFIED ARBORIST, UTILITY SPECIALIST,and MUNICIPAL SPECIALIST EXAM (12:00 PM EST – 5:00 PM EST)Wednesday, October 10th - OPEN HOUSE DAYS AT THE MINNESOTA LAND-SCAPE ARBORETUM GRASS COLLECTION (1:00 PM CST – 6:00 PM CST)October 24th thru October 26th – GIE & EXPO 2012October 24th thru October 26th – 2012 HARDSCAPE NORTH AMERICANovember 2th thru November 6th – 2012 IRRIGATION SHOW & EDUCATION CONFERENCENovember 8th thru November 10th – TCI EXPO 2012 in BALTIMORENovember 16th – 9:00 AM CST – 3:30 PM CST –PESTICIDE RECERTIFICA-TIONJanuary 8, 2013 – 8:00 AM CST – 5:00 PM CST – SUPER TUESDAY:PERMEABLE PAVER SYSTEMS CERTIFICATE COURSEJanuary 8, 2013 – 8:00 AM CST – 5:00 PM CST – SUPER TUESDAY:LANDSCAPE IRRIGATION TROUBLESHOOTING (PLT RELICENSURE)***Please contact MNLA at [email protected] or call toll free: 888-886-6652 for more information.

AGC of AMERICA is pleased to offer a wide variety of meetings, events andseminars for construction professionals that can help you improve everyaspect of your business. AGC of MINNESOTA

AGC of MINNESOTA525 Park Street, #110, St. Paul, MN 55103-2186Telephone: 651/632-8929 or 800/552-7670 Fax: 651/632-8929

Email: [email protected] Website: www.agcmn.org

PLAN TO ATTEND: UNIVERSITY OF MINNESOTA, 2012 CONSTRUCTIONEXPOThursday – October 4, 2012, 9:00 AM to 3:00 PM, University of Minnesota,Coffman Memorial Union, Great hall, 300 Washington Avenue S.E.,Minneapolis, MN 55455-0110Exhibit Booths . Networking . Awards Incentive & Recognition (AIR)Luncheon. For more information or to register visit: bced.umn.edu. Or, youmay call Denise Woods, CMP, AGC of MN direct at 651/796-2186 or tollfree: 800/552-7670. Email: [email protected]. Website:www.agcmn.org.

October 16th – FALL MEMBER MEETING. The fall member meeting will beheld October 16 at the Embassy Suites Minneapolis Airport. The programwill feature Jim Schug of FMI Corporation. Jim will present case studies ofsuccessful contractors and analyze how companies both small and largecan remain successful in the current economy. The results of the 2012 –2013 Construction Industry Assessment Survey will also be released.

Build America Award Application AvailableThe 2013 AGC/Alliant Build America competition is open to general contrac-tors and specialty contractors who are current members of an AGC chapterworking as prime contractors for projects completed between November 1,2011 and November 1, 2012. Member companies can visithttp://awards.agc.org/ to begin a project entry. (Please note that this is anewly developed site and will be continually updated throughout the durationof the awards season. Thank you in advance for your patience and cooper-ation.) The final deadline for all submissions is Friday, November 2, at 5:00pm EST. Winners will be announced at AGC’s 94th Annual Convention inPalm Springs, California next March.

*** For more information on the above AGC of Minnesota events, youmay contact Denise Woods,CMP; Director, Communications & Events,Associates General Contractors of Minnesota, 525 Park Street, #110, St.Paul, MN 55103 DIRECT: 651/796-2186; CELL: 612/201-5501; FAX:651/632-8928; TOLL FREE: 800/552-7670 and/or www.agcmn.org.

Thursday, October 4, 2012 – Bridge Project. Mississippi River BridgeProject located at DoubleTree Hotel St. Louis at Westport, 1973 Craigshire,St. Louis, MO 63146. You will want to hear Tom Tavernaro, Project Engineer for the Massman,Traylor, Alberici joint venture provide an overview of the construction workof the Main Span portion of the bridge project. Tom will review the con-struction activities which took place in 2010 and 2011 and discuss theupcoming construction activities this year.Cost: $55.00; Cocktails: 5:30 PM; Dinner: 6:30 PM; Presentation: 7:30PMThe dinner entrée will be grilled chicken breast. A two hour bar is includedin the cost of the dinner. If you have special dietary needs, please advise.Any reservation not canceled prior to Monday, October 1, 2012 at 5:00PM will be billed. Friday, October 19, 2012 – Tournament. Fall Sporting Clays Tournament

at St. Louis Skeet and Trap Club. For Early Bird Sponsorship Specials, signup to be a sponsor by Friday, September 28th, 2012 to get the early birdspecial. This event raises money for the AGC of St. Louis’ Political ActionCommittee, which in turn enables the AGC to strengthen the legislativevoice of the industry. AGC ST. LOUIS – if you have any questions regarding the above AGCevents, you may call Nancy Valentine at the AGC office at 314/480-3173 or email: [email protected]. Completed registration formsand/or information pertinent to the above events, you may contactDonna Pigg at the AGC of St. Louis office at 314/781-2874.

Georgia Utility Contractors Association, Inc.2012 3rd Quarter Safety Training ScheduleTopics Include: . Competent Person Excavation. Confined Space Entry Program. Damage Prevention/GUFPA Law/PSC. ISEE Blasting Certification. Temporary Utility Workzone Traffic Control. NPDES Level 1A Course and Exam*. NPDES Level 1A Recertification Course*. NPDES Level 1B Course and Exam*. GDOT Approved Flagging Program. GDOT Approved Flagging Instructor Program

*No Checks accepted less than 5 days prior to class date payment reservesthe seat for class – we do not save seats. For more information on the aboveclasses which include dates/locations/costs, please contact ScottBrumbelow, Assistant Executive Director, GUCA, 404/362-9995.

GUCA 804 Main Street, Suite C, Forest Park, GA 30297404/362-9995, 877/SAF-GUCA, Fax: 404/362-9211www.guca.com

HOFFMAN EQUIPMENT, Piscataway, NJ – NCCCO Class Schedule – NCCCO Mobile Crane Certification Dates AvailableWritten Exam Prep (must pre-register August 20 - 24At least 2 weeks prior to class) October 15 – 19Mobile Crane Practical Exam Practice Call To ScheduleMust ScheduleNCCCO Mobile Crane Certification Call To SchedulePractical Exam – Must ScheduleFor More Information or to Register, Call Nancy DeCarr800-4-HOFFMANwww.hoffmanequip.comNew Jersey Corporate HeadquartersHoffman Equipment300 South Randolphville Road • Piscataway, NJ 08854

2012 FLORIDA Contractor Associations Meetings Postings:

New Installations: Wednesday, October 10th and Tuesday, December 4th

NASTT’s mission is to advance trenchless technology and to promote its ben-efits for the public and the environment by increasing awareness and knowl-edge through information dissemination; research and development; educa-tion and training; and partnerships with organizations and agencies interest-ed in trenchless technology and its benefits. NASTT provides a representativevoice for all sectors of the trenchless technology industry. For more infor-mation about NASTT and the variety of training opportunities provided, pleasevisit www.nastt.org or contact Michelle Hill, Communications & TrainingManager at 440/638-4676 or [email protected].

MNSW – ROAD – INST – SCHEDROAD INSTITUTE 2012 – 2013 Schedule Announced!!!Road Institute R will soon begin its 48th year as the asphalt paving industry’spremier training school, providing practical instruction for industry profes-sionals. Volvo Construction Equipment has announced the 2012 – 2013 schedulefor the Road Institute. The course curriculum offers two- to five-day sessionsthat begin in October and continue through May 2013, with classes held attwo training facilities in North America – one in Chambersburg, PA and theother in Phoenix, AZ. “The Volvo commitment to training includes offering thisprogram as a service to the industry and providing others the opportunity tolearn best practices in a controlled environment with a focus of instructionand training dedicated to asphalt paving,” said Wade Turlington, Director ofProduct and Sales Education. “The Road Institute is dedicated to providingquality instruction to industry professionals, even if they don’t own or oper-ate Volvo equipment.” 2012 – 2013 Road Institute Course SCHEDULE includes topics such as:. Automatic Grade and Slope Systems. Large Asphalt Compactor Mechanics (Step 1). Large Asphalt Compactor Mechanics (Step 2). MT2000 Hydraulic and Electrical Systems (Step 1). MT2000 Hydraulic and Electrical Systems (Step 2). MW500 Hydraulic and Electrical Systems (Step 1). Paver and Compactor Operation and Maintenance. Paver and Compactor Operation and Maintenance, warm-mix asphalt(WMA). Paver Hydraulic and Electrical Systems – PF6000 – Series Pavers (Step1). Paver Hydraulic and Electrical Systems – PF6000 – Series Pavers (Step2). Paver Hydraulic and Electrical Systems – Blaw-Knox R Pavers (Step 1). Paver Screed Operation and Adjustment. Paving and Compaction Application Seminar. Small Asphalt Compactor Mechanics (Steps 1 and 2). Soil Compaction Application Seminar. Soil Compactor Mechanics (Step 1). Soil Compactor Mechanics (Step 2)Class size is limited for ideal instructor-to-student ratios and team learning.Tuition is $750 (USD) per student per three to five day course or $500 (USD)per student per two day seminar. For more information on the Road Instituteor to register for classes, visit roadinstitute.com or call 866/497-4501 oremail: [email protected].

BusinessCalendar


Volvo CE Wins AEM Gold for ‘I Make America’ CampaignAs the London 2012 Olympic games

came to a close, America was celebratingafter finishing top of the medal table — win-ning more gold medals than any other coun-try in the world. Volvo ConstructionEquipment (Volvo CE) joined America’sgold-winning streak — awarded “gold sta-tus” by The Association of EquipmentManufacturers (AEM) for its participation inthe I Make America campaign. The cam-paign hopes to dramatically improveAmerican manufacturing policies to createmore jobs in the United States and keep itseconomy competitive with other countries. The Association of Equipment

Manufacturers (AEM), with more than 850member companies, announced that VolvoCE joins the elite ranks of the I MakeAmerica campaign’s gold-level companysupporters. Volvo CE has shown continuousyear-on-year dedication to this cause,expanding its sites, factories and work force

in order to grow the industry. Last year,Volvo CE achieved silver status for its par-ticipation in the grassroots campaign, firstlaunched in September 2010. Since the campaign’s inception, Volvo

CE has been heavily involved as a dedicat-ed partner contributing to its overall suc-cess. By asking state legislators and mem-bers of Congress to pass new job develop-ment policies through ambitious construc-tion projects and the restoration of theU.S.’s aging infrastructure, the companyhopes it can make a difference. “We commend Volvo CE for achieving

Gold status in the I Make America cam-paign,” said Dennis Slater, president ofAEM. “As a member of AEM, Volvo CEexemplifies the commitment we need fromall manufacturers around the country tosend the message to Congress and the

White House that our economy is in urgentneed of a new manufacturing policy that willgenerate jobs.”

There Is No Stopping Volvo Volvo CE has shown its dedication to the

long-term development of the U.S. construc-tion industry following its $100 millioninvestment in its manufacturing facilities inShippensburg, Pa., which will bring morejobs and local manufacturing of core prod-ucts to one of Volvo CE’s home markets.Volvo CE is creating a modern customer anddemonstration center in Shippensburg, aswell as an Americas Headquarters facility onits current campus, further demonstrating itscommitment to the North American market. “We all want the best for America,” said

Bill Law, Volvo CE vice president of corpo-rate communication for the Americas region. “Initiatives such as I Make America are

excellent ways to focus everyone’s attentionon using the muscle of the constructionindustry to get the giant wheel of the U.S.economy spinning at top speed again.”

I Make America gold-level supporters are an importantgroup of companies. Many of the companies are industryleaders that have reached out to the state or local and federallegislators. The campaign has enlisted the support of morethan 21,000 people nationwide so far, including industryorganizations.AEM membership comprises more than 200 product lines

in the agriculture, construction, forestry, mining and utilitysectors worldwide. Volvo has been involved with the I MakeAmerica campaign from the very beginning and has given IMake America presentations to its employees in their manu-facturing facilities and sales organization. “Our workforce is aware that, through properly thought-

out legislation and well-funded infrastructure development,so many jobs and wealth have been created in recentdecades,” adds Law. “They are keen to support initiativesand legislation that will continue to create jobs.”

Goran Lindgren (L),Volvo CE president of

sales region Americas,and Andy Knight, head of

Volvo CE operations inthe Americas, break

ground on theShippensburg, Pa.,

expansion.

Volvo CE is investing $100 million to grow its manufacturing facilities in North America.

Technicians and engineerswork hard to produceexcellent machinery onsite.



Complete Liquidation

(approx. 120 miles southeast of Baltimore)THURSDAY, OCTOBER 18th at 10AM

Inspection: Day Prior from 9AM - 4PM

Large Late Model CAT & KOMATSU Construction EquipmentB L AW K N OX

MACK MACK Tri-Axle Dump Trucks - As New

TERMS:

MYRON BOWLING

To bid online,register at:www.lyonauctionlive.com (315) 633-2944 www.lyonauction.com


N.C. Contractors Enjoy DualCustomer Appreciation Day

Blaine Reese (L) and Joey Ross, both ofJ&J Logging, Henderson, N.C., look for-ward to the annual event.

(L-R): Jimmy Cole and George Marsh, both of Gelder & Associates, Raleigh, N.C.,thank Dan Moore for his hospitality.

Mark Barnes, Benchmark Tool &Supply, sets up the Sokkia RoboticTotal Station. The machine is used forsurveying and setting the stakes.

Tom Sullivan, Sullivan Eastern, Durham,N.C., tested this John Deere 672GP motor-grader.

SKEET from page 62

www.lyonauction.com corporate offices: Bridgeport, NYPhone: (315) 633-2944 • Fax: (315) 633-5635

www.lyonauctionlive.com

Sales Managers & Auctioneers, Inc.

WED., OCT. 24 @ 9:00 AM

ALEX

LYON& SON

NOTE: Selling will be a large amount of rental fleet equipment from several national

rental fleets.

HILITES: 5 ARTICULATED HAUL TRUCKS: 2007-2006 Volvo A40D, 2005 Volvo A35D, (2) 2007 Terex TA30, 17

HYDRAULIC EXCAVATORS: Unused Cat 320EL, 2003 Cat 305SR, 2006 Volvo EC700B, 2007-2005 EC240CL, Volvo

ECR88, (2) 2006 Kobelco Sk350LC-6, 2005 - 2004 Kobelco SK250LC, (2) 2006-(2) 2005 Kobelco SK135SR, Kobelco

SK115DZ-IV, IHI 35N, (4) 2005 IHI 28N-2, IR ZX75, 2 LONG REACH EXCAVATORS: Unused 2012 Doosan

DX225LC, 2005 Cat 322CLR, 2 MOTOR GRADERS: JD 772, JD 770A, 9 RUBBER TIRED LOADERS: 2009-2008

Volvo L110F, (2) 2005 Case 621D, 2005 Komatsu WA250, 2008 Cat 962H (grapple), Cat 938G (log fork), Cat 920, JD

544J, TOOL CARRIER: Cat IT38G, 8 CRAWLER TRACTORS: Cat D8R, Cat D8N, 2003 Cat D6NLGP, 2006-(2)

2005 JD 650J, 2006-2005 JD 450JLGP, 10 TRACTOR LOADER BACKHOES: 2011 Case 590 Super N (4x4), 2006-

(3) 2005 Case 580M (4x4), 2007-2006 JCB 214 (4x4), 2005 NH LB75B (4x4), JD 310, 2007 Allmand TLB425,

ASPHALT PAVERS: 2008 IR PF6170, 5 ASPHALT ROLLERS: IR SD122DX, 2003 IR DD130, (2) Bomag BW75AD,

2004 Multiquip MRH800DS, 14 VIBRATORY ROLLERS: (2) 2007 Cat CP563E, (3) 2007-2006 Dynapac CA250D

(cab), 2006 IR SD100D, (3) 2004 IR SD70D, (2) 2004 IR SD45D, 2006 Hamm 3205, 2006 Bomag BW211-3, 19 RUB-

BER TRACKED SKID STEERS: 2007-2006 Bobcat T300, (2) 2007- (9) 2006 Bobcat T190, 2005 JD CT322, (2) 2006

Takeuchi TL130, 2009-(2) 2007 Komatsu CK35, 10 SKID STEERS: 2008 Case 465, 2006 Bobcat S220, (4) 2006 Bobcat

S175, (3) 2005 JD 317, Gehl 4835, 2 TRENCHERS: 2004 Ditch Witch 1330, Ditch Witch 1030H, FELLER BUNCH-

ERS: Hydro-Ax 321, 4 TELESCOPIC FORKLIFTS: 2005-2004 JLG G9-43A, 2005 IR VR843C, 2006 JCB 508C, 4

PIGGY BACK FORKLIFTS: (4) Moffett M5000, 4 BOOM LIFTS: 2004 JLG 800S (4x4), (2) 2004 Genie Z45/25RT,

2005 Snorkel UNO41G, 15 SCISSOR LIFTS: (6) 2003 Genie AWP-30S, 2005 Genie GS2632, (4) 2003 Genie GS1930,

(2) Genie GS1930, Skyjack 4626, 7 AIR COMPRESSORS: (2) 2006 Sullair 185DPQJD, Sullair 185DPQJD, 2005-2003

IR P185WJD, 2004 Airman PDS185S, Airman PDS185S, 5 GENERATORS: (2) Demo Cat 500kw, 2006 Multiquip

DCA70USIC, (2) 2006 Multiquip DCA25USI, 15 WELDERS: (2) 2007 –(2) 2006-(3) 2005 Miller Big Blue 400D, 2006

Miller BB400D, 2006 Miller Big 40, 2008 Multiquip DLW40ES, (2) 2006-2004 Multiquip BLW400SS, 2006 Lincoln

Vantage 300, 6 LIGHT PLANTS: (2) 2006 Magnum Pro MLT3060, (3) 2004 Magnum MLT3060, Magnum MLT3060, 2

WATER PUMPS: 2006-2003 Pioneer PP66S12L, 4 SWEEPERS: 2010 -2009 Broce KR350 (cab), (2) 2004 Terramite

TSS38, DIGGER DERRICK TRUCKS: 1982 Int’l. S1800 AWD (s/a), DUMP TRUCKS: 1996 Mack RD690S (tri.),

BOOM TRUCKS: 1999 Int’l. 4700 15T (s/a), FLATBED TRUCK: 2005 Freightliner Cab Over (tri.), 3 TRUCK

TRACTORS: 2005 Peterbilt 378 (t/a), 2005 Kenworth 900 (t/a), 2004 Volvo 4NL430 (t/a), 2 WATER TANKERS: Cat

769C, Cat 613C, SERVICE TRUCK: 2006 Ford F350XL 9 PICKUPS: 2005 Ford F250 (4x4), 2005 Ford F250, 2000

Ford F150XLT, 2006-2003-2002-2001 Ford F150, 2008 Dodge Ram 1500, 2003 Chevy Silverado 1500 Z71, SUPPORT

EQUIPMENT: Folding Ramps, Huskie Hammer Drill, New Impact Wrenches, New Abrasive Blades, New Submersible

Pumps, New Platform Scales, New Stiff Neck Pintle Hitches, New Air Spray Gun Kits, New Diamond Blades, New

Concrete Vibrators, New Plate Compactors, New Demo/ Cutoff Saws.

Address: 12601 State Rd. 545 North (Avalon Rd.), Winter Garden, FL 34787.

DIRECTIONS: From Tampa: I-4E to Rte. 27N for 6.5 miles to Rt. 192E for 1 mile. Left on Avalon Rd. for 3 miles to

sale site on left. From Orlando:I-4W to Rt. 192W for 5.5 miles, turn right on Avalon Rd. to sale site.

FLORIDA AUCTIONEER LICENSE: #AU 0001548, FLORIDA LICENSE: #AB-1091.

SALE SITE PHONE: (407) 239-2700, (770) 537-7386,

FAX: (407) 239-0068.

LARGE AUCTION OF RENTAL RETURNS: CONSTRUCTION EQUIPMENT,

SUPPORT, ATTACHMENTS,

AERIALS & FORKLIFTS.

NEFF RENTALS

HERTZ EQUIPMENT RENTALS

KISSIMMEE,(WINTER GARDEN)

FLORIDA

AUCTION

RENTAL RETURN AUCTION


ADVERTISER INDEX

The Advertisers Index is printed as a free editorial service to our advertisers and readership. Construction Equipment Guide is not responsible for errors or omissions.

ADVANCE TIRE ..........................................................................50ALEX LYON & SON INC

KISSIMMEE FL....................................................................93ANACONDA CONVEYORS USA INC ........................................25ASC CONSTRUCTION EQUIPMENT USA ............................3,38BAIR PRODUCTS INC ................................................................56BARGAINS ..................................................................................80BENCH MARK TOOL & SUPPLY ..................................................7BID SPOTTER ............................................................................89BOBCAT COMPANY....................................................................48BOMAG........................................................................................73BROOKS SALES INC....................................................................6CASE CONSTRUCTION ........................................................44,45CAT AUCTION SERVICES ..........................................................85CEG SCALE MODELS ................................................................40CHICAGO PNEUMATIC ..............................................................24CLASSIFIEDS..............................................................................80CLEVELAND BROTHERS EQUIPMENT CO ........................17-19COMPANY WRENCH ..................................................................27CONSTRUCTION EQUIPMENT GUIDE

WANTED ............................................................................81CRAWLER LOADER PROMO ............................................42AUCTION RESULTS ..........................................................91ONE BUY NATIONAL COVERAGE ....................................36

DOMINION EQUIPMENT PARTS................................................77DYNAPAC ....................................................................................64FLANGE LOCK ............................................................................30FLUID CONTROL SERVICES ....................................................14G S EQUIPMENT ..........................................................................2GEHL............................................................................................56GOMACO CORP ........................................................................65H & L TOOTH CO ........................................................................29HALE TRAILER BRAKE & WHEEL ............................................21HILLS MACHINERY COMPANY..................................................96HITACHI CONSTRUCTION MACHINERY..............................78,79HYDREMA U S INC ....................................................................15HYUNDAI CONSTRUCTION EQUIPMENT ................................41IRON PLANET ............................................................................83JCB INC ..................................................................................52,53JFW EQUIPMENT INC ................................................................66JOHN DEERE ..............................................................................57JOHN DEERE SKID STEER ......................................................95K I T EQUIPMENT ......................................................................22

KAWASAKI ..................................................................................51KOBELCO ..............................................................................46,47KOMATSU AMERICA CORP ............................................37,54,55KUBOTA SVL ..........................................................................58,59LEEBOY..................................................................................68,69LIEBHERR CONSTRUCTION EQUIPMENT ................................9LIUGONG ....................................................................................33M D MOODY & SONS INC..........................................................13MACKINNON EQUIPMENT & SERVICE ....................................10MAULDIN PAVING PRODUCTS..................................................75MAY HEAVY EQUIPMENT ..........................................................22MINNICH MANUFACTURING ....................................................66MOTLEY'S AUCTION & REALTY GROUP

RICHMOND VA ..................................................................87MYRON BOWLING AUCTIONEERS

EDEN MD ............................................................................92NPK CONSTRUCTION EQUIPMENT INC ..................................35PINNACLE CENTRAL CO ..........................................................22PROFESSIONAL SHORING & SUPPLY ......................................6RING POWER CRANE................................................................10RING POWER RENTAL ................................................................5ROAD BUILDERS MACHINERY ................................................24ROSCO MFG CO ........................................................................67RUBBERTRAX INC......................................................................50SAKAI AMERICA INC ..................................................................71SANY AMERICA INC ..................................................................27SITECH MID-ATLANTIC ..............................................................23SNEAD AG SUPPLY & SERVICES ............................................11SOLESBEES EQUIP & ATTACHMENTS ....................................14STONE CONSTRUCTION EQUIPMENT ....................................70TAKEUCHI ..................................................................................61TAYLOR AUCTION & REALTY

GRENADA MS ....................................................................87TEREX COMPACT ......................................................................70TOKU AMERICA INC ..................................................................20TRENCH SHORING SERVICES ................................................31VOLVO COMPACTION ................................................................72VOLVO CONSTRUCTION EQUIPMENT ....................................39WHITE OAK EQUIPMENT INC ....................................................6WILSON FINLEY ........................................................................76WIRTGEN AMERICA ..................................................................74YANMAR AMERICA ....................................................................60


You asked. We delivered. Our D-Series SkidSteers are loaded with customer-recommendedenhancements, like larger operator stations,quiet pressurized cabs with best-in-class visibility, and curved-glass swing-out doors. D-Series innovations include an exclusive cooling system with available hydraulically driven variable-speed fan that reverses to clear core-clogging buildup. Plus options suchas electrohydraulic joysticks, variable boomand bucket speed settings, and more than 100 attachments to let you take on more tasks.

Packed full of best-in-class productivity anduptime-enhancing features, the D-Series aredestined to become owner and operatorfavorites. Ask for a demo today.

The Difference is in the D-tails.

www.johndeere.com

KS1CUFFOO34N-00268028

Ashland, VA 23005804/358-6776

Burkeville, VA 23922434/767-5578Fishersville, VA540/337-3057Richland, VA276/596-9440

Asheboro, NC 27203336/625-2212Charlotte, NC704/597-0211 Greensboro, NC336/668-2762

Matthews, NC 28104704/821-7399Mt. Airy, NC336/352-2240Mt. Gilead, NC910/439-5653

Salisbury, NC 28144704/636-2671

Wilkesboro, NC 28697336/973-8201800/422-4193

Rock Hill, SC 29730803/325-1555866/277-8119

1206 Blaylock St, P.O. Box 3329Albany, GA 31706229/888-1212

Fax: 229/435-3612Cuthbert GA229/732-2631Dothan, AL334/794-8691Troy, AL

334/566-4181Perry, FL850/584-9200Tallahassee, FL850/575-5600

West Columbia, SC 29169803/794-9340

Aynor, SC 29511843/358-5688

Atlanta, GA 30336404/691-9445

Braselton, GA 30517770/965-1889

Adairsville, GA 30103770/773-9857Savannah, GA912/964-7370Brunswick, GA912/264-6161Ladson, SC843/572-0400Walterboro, SC843/539-1420

R.W. MOORE

EQUIPMENT CO.www.rwmoore.comAhoskie, NC252/332-5550New Bern, NC252/638-5838Greenville, NC252/758-4403Castle Hayne, NC910/675-9211

COASTAL

EQUIPMENT CORP.www.coastalequipment.net504 South Military HwyVirginia Beach, VA 23464

757/424-1900Yorktown, VA 23692757/898-1900

FLINT EQUIPMENT COMPANYJAMES RIVER EQUIPMENT

CONTACT YOUR LOCAL JOHN DEERE SKID STEER LOADER DEALER


North Carolina

South Carolina

Tier 3

Case SR220 Skid Steer Loader

Call Today!

Case SR250 Skid Steer Loader Case 586G Rough Terrain Forklift

Case TV380 Compact Track Loader Case TR320 Compact Track Loader Case TR270 Compact Track Loader

ier 3T

ier 3

ier T

3

No reasonable offer will be turned downLow rate financing and no down payment

y! They will go fHurr

No reasonable offer will be turned downLow rate financing and no down payment

asty! They will go f

ned

wn p

#NBM441014 Case TV380 Compact T

rack Loader act T Track Loader

#NCM440404 Case TR320 Compact T

#NBM438910, #NBM439021 Case TR270 Compact Track Loader t T Track Loader

#NBM438910, #NBM439021 Case TR270 Compact T

#NBM438910, #NBM439021 rack Loader T Track Loader

#NBM432151, #NBM432155 Case SR220 Skid Steer Loader

#NBM432151, #NBM432155 Case SR220 Skid Steer Loader

#NBM434360 Case SR250 Skid Steer Loader

#NBC548477 Case 586G Rough TCase SR250 Skid Steer Loader

#NBC548477 erra Case 586G Rough T Terrain Forklift

errain Forklift

#NBM432151, #NBM432155

oCall T Today!.hillsmachinerwww

Fax:Phone:877-549-3232

eenville, NC 27834Gr315 Easy Str

eenvilleGrNorth Carolina

#NBM432151, #NBM432155

oday!.comy.hillsmachiner

Fax: Phone:888-830-5939Columbia, SC 292091014 Atlas WColumbiaSouth Carolina

252-758-4163Fax:252-752-7145Phone:

877-549-3232eenville, NC 27834

eet315 Easy Streenville

North Carolina

#NBM434360

843-225-9378Fax:Phone:866-830-7577North Charleston, SC 294187168B CrCharleston

803-233-4482803-658-0200Phone:

888-830-5939Columbia, SC 29209

ay 1014 Atlas WColumbiaSouth Carolina

#NBC548477

843-225-9378843-225-9377

866-830-7577North Charleston, SC 29418

oss County Road 7168B CrCharleston

#NBC548477

ovaledit appr roval*Subject to cr redit appr

Southeast #20, 2012

Documents

new metros

housing page

new facility

housing markets list

pipeline page

housing permits

housing marketsacross

new transcanada propos