Source pack installation of OpenFOAM.4.0 into RHL

Sourcepackinstalla0onofOpenFOAM.4.0intoRHL

OpenCAELocalStudyMee0ngY.Takagi

July2,2016

Downloadthepackagesfromtheofficialwebsite

Whereshouldweinstall?

•  IfyouhaveamachineonlyforOpenFOAM,youcanupgradethelibrariesofthesystem.“DependentpackagesrequiredforRHEL6.5needupda:ngtonewerversions,e.g.Gccneedsupgradingfromv4.4tov4.5+.TheseupgradesmaybeavailableunderaRHELsupportsubscrip:on.Ifnot,thenupgradescanbeobtainedfromunofficialrepositoriesusingthefollowinginstruc:ons:”

•  Ifyoudonotwanttoupgradethesystemcasually,thecompa0blesoSwares/librariessuchasGCCandMPIarebuiltinthelocalThirdPartydirectory.

Ourmachineenvironment

•  OS:CentOS6.5(64bit)•  Systemlibraries:

–  GCC4.4.7–  cmake2.6-patch4–  Qt4.6.2

•  Targetconfigura0onofOpenFOAM–  Version4.0–  Mainsolvers,parallelprocessing,paraFoam(ParaViewreader)–  Requiredlaterversionlibrariesarebuiltintheprojectdirectory

(ThirdPartydirectory).

Procedureofinstalla0on

1.  Installthenecessaryrpmpackages.2.  Downloadthesourcepackagesandextractthem.3.  Edittheconfigura0on/sedngfiles.4.  Compilethetools/libraries.5.  Allwmake6.  Test(foamInstallationTest)7.  CompileParaViewanditsreader.

Installtherpmpackageswithyum

•  Necessarypackages:–  git,gcc-c++,bison,flex,m4,glibc-devel,glibc-devel.i686,zlib-devel

•  Asaroot,typetheyumcommand:$ yuminstallgccgcc-c++bisonflexm4glibc-devel\glibc-devel.i686zlib-devel

Directoryconfigura0on

•  UnderOpenFOAM-4.0

•  UnderThirdParty-4.0

Allwmakeapplica0ons/doc/plalorms/tutorials/COPYINGREADME.orgbin/etc/src/wmake/

Allclean cmake-3.2.1/ makeParaView3Allwmake etc/ makeQtAllwmakeLibccmio gcc-4.8.5/ mpc-1.0.1/CGAL-4.8/ gmp-5.1.2/ mpfr-3.1.2/COPYING makeCGAL openmpi-1.10.2/ParaView-5.0.1/ makeCmake plalorms/README.html makeGcc qt-everywhere-opensource-src-4.8.6/README.org makeGperSools scotch_6.0.3/boost_1_58_0/ makeLLVM build/ makeParaView

Red: make by yourself Blue: generated later

Downloadthesourcepackagesandextractthem

•  OpenFOAMmainsourcecode:

•  OpenFOAMThirdParty:

•  Compiler(GCC):

$ gitclonegit://github.com/OpenFOAM/OpenFOAM-4.x.git$ mvOpenFOAM-4.xOpenFOAM-4.0

$ gitclonegit://github.com/OpenFOAM/ThirdParty-4.x.git$ mvThirdParty-4.xThirdParty-4.0

$ cdThirdParty-4.0.x$ wgethttps://ftp.gnu.org/gnu/gcc/gcc-4.8.5/\gcc-4.8.5.tar.gz$ tarzxvfgcc-4.8.5.tar.gz


•  Libraries(gmp,mpfr,mpc)$ wgethttp://ftp.gnu.org/gnu/gmp/gmp-5.1.2.tar.bz2$ tarjxvfgmp-5.1.2.tar.bz2$ wgethttp://ftp.gnu.org/gnu/mpfr/mpfr-3.1.2.tar.gz$ tarzxvfmpfr-3.1.2.tar.gz$ wgethttp://ftp.gnu.org/gnu/mpc/mpc-1.0.1.tar.gz$ tarzxvfmpc-1.0.1.tar.gz


•  OpenMPI:

•  Scotch:•  Boost:

•  CGAL:

$ wget--no-check-certificatehttps://www.open-mpi.org/\software/ompi/v1.10/downloads/openmpi-1.10.2.tar.gz$ tarzxvfopenmpi-1.10.2.tar.gz

$ wgethttps://gforge.inria.fr/frs/download.php/\file/34099/scotch_6.0.3.tar.gz$ tarzxvfscotch_6.0.3.tar.gz

$ wgethttp://sourceforge.net/projects/boost/files/\boost/1.58.0/boost_1_58_0.tar.gz$ tarzxvfboost_1_58_0.tar.gz

$ wgethttps://github.com/CGAL/cgal/releases/download/\releases/CGAL-4.8/CGAL-4.8.tar.xz$ tarJxvfCGAL-4.8.tar.xz


•  Cmake:

•  Qt(qmake)

IfyoudonotneedParaView,thispackageisunnecessary.

$ wget--no-check-certificatehttps://download.qt.io/\archive/qt/4.8/4.8.6/qt-everywhere-opensource-src-4.8.6.tar.gz$ tarzxvfqt-everywhere-opensource-src-4.8.6.tar.gz

$ wget--no-check-certificatehttps://cmake.org/files/\v3.2/cmake-3.2.1.tar.gz$ tarzxvfcmake-3.2.1.tar.gz

Edittheconfigura0on/sedngfiles

•  EditOpenFOAM-4.0environmentfile

$ vi../OpenFOAM-4.0/etc/bashrc

exportWM_PROJECT=OpenFOAMexportWM_PROJECT_VERSION=4.0#Pleasesettotheappropriatepathifthedefaultisnotcorrect.#[$BASH_SOURCE]&&\exportFOAM_INST_DIR=${BASH_SOURCE%/*/*/*}||\#exportFOAM_INST_DIR=$HOME/$WM_PROJECT#exportFOAM_INST_DIR=~$WM_PROJECTexportFOAM_INST_DIR=/opt/$WM_PROJECT#exportFOAM_INST_DIR=/usr/local/$WM_PROJECT


$ vi../OpenFOAM-4.0/etc/bashrc

#-Compilerlocation:#WM_COMPILER_TYPE=system|ThirdParty(OpenFOAM)exportWM_COMPILER_TYPE=ThirdParty#-Labelsize:#WM_LABEL_SIZE=32|64exportWM_LABEL_SIZE=64#-MPIimplementation:#WM_MPLIB=SYSTEMOPENMPI|OPENMPI|SYSTEMMPI|\MPICH|MPICH-GM|HPMPI#|MPI|QSMPI|SGIMPIexportWM_MPLIB=OPENMPI


•  EditOpenFOAM-4.0compiler/librariessedngfile

$ vi../OpenFOAM-4.0/etc/config.sh/compiler

case"$WM_COMPILER_TYPE"inOpenFOAM|ThirdParty)#DefaultversionsofGMP,MPFRandMPC,overrideasnecessarygmp_version=gmp-5.1.2mpfr_version=mpfr-3.1.2mpc_version=mpc-1.0.1case"$WM_COMPILER"inGcc|Gcc48)gcc_version=gcc-4.8.5


•  EditThirdParty-4.0/makeCGAL

$ vimakeCGAL

#GetCGAL,boostandgmp/mpfrversions.$WM_PROJECT_DIR/etc/config.sh/functions_foamEvalSOURCE_CGAL_VERSIONS_ONLY=yes\$($WM_PROJECT_DIR/bin/foamEtcFileconfig.sh/CGAL)_foamSource$($WM_PROJECT_DIR/bin/foamEtcFileconfig.sh/compiler)set-xcgalPACKAGE=${cgal_version:-CGAL-4.8}boostPACKAGE=boost_1_58_0gmpPACKAGE=gmp-5.1.2mpfrPACKAGE=mpfr-3.1.2


•  EditCGAL

$ vi../OpenFOAM-4.0/etc/config.sh/CGAL

#Description#SetupfileforCGAL(&boost)include/libraries.#SourcedfromOpenFOAM-<VERSION>/etc/bashrc#---------------------------------------------------------boost_version=boost_1_58_0#cgal_version=cgal-systemcgal_version=CGAL-4.8

Compilethetools/libraries

•  ReloadtheOpenFOAMenvironmentfileandcompileGCC:

$ ./opt/OpenFOAM/OpenFOAM-4.0/etc/bashrc

Warningin/opt/OpenFOAM/OpenFOAM-4.0/etc/config.sh/settings:Cannotfind/opt/OpenFOAM/ThirdParty-4.0/platforms/linux64/gcc-4.8.5installation.Pleaseinstallthiscompilerversionorifyouwishtousethesystemcompiler,changethe'WM_COMPILER_TYPE'settingto'system'

$ ./makeGcc

Compilethetools/libraries

•  BuildCMakeandexecuteAllwmake:

•  BuildOpenFOAM:

•  ASerthecompiling,checkit:

$ ./makeCmake$ ./opt/OpenFOAM/OpenFOAM-4.0/etc/bashrc$ ./Allwmake

$ ./opt/OpenFOAM/OpenFOAM-4.0/etc/bashrc$ cd/opt/OpenFOAM/OpenFOAM-4.0/$ ./Allwmake–j4#-j4dependingonyourmachine

$ ./opt/OpenFOAM/OpenFOAM-4.0/etc/bashrc$ foamInstallationTest

CompileParaViewanditsreader

•  BuildQt–  ShellscriptforQtcompilingisnotincludedinThirdParty4.0.

$ cd/opt/OpenFOAM/ThirdParty-4.0$ cp/opt/OpenFOAM/ThirdParty-3.0.x/makeQt./$ cp/opt/OpenFOAM/ThirdParty-3.0.x/etc/tools/QtFunctions\./etc/tools/$ vimakeQt

#Description#Buildscriptforqt-everywhere-opensource-src#---------------------------------------------------------qtVERSION=4.8.6qtTYPE=qt-everywhere-opensource-src

$ ./makeQt


•  CompileParaView5.0.1 $ vimakeParaView

#SetthepathtotheQt-4.5(orlater)qmakeifthe\systemQtisolderQMAKE_PATH="/opt/OpenFOAM/ThirdParty-4.0/\platforms/linux64Gcc/qt-4.8.6/bin"#SetthepathtocmakeCMAKE_PATH="/opt/OpenFOAM/ThirdParty-4.0/\platforms/linux64Gcc/cmake-3.2.1/bin"

$ ./makeParaView


•  CompileParaViewreader

•  ASerthecompiling,checkatutorialrun(cavity):

$ cd$FOAM_UTILITIES/postProcessing/graphics/PVReaders$ ./Allwclean$ ./Allwmake

$ ./opt/OpenFOAM/OpenFOAM-4.0/etc/bashrc$ mkdir–p$FOAM_RUN$ run$ cp–r$FOAM_TUTORIALS/incompressible/icoFoam/\ cavity/cavity./$ cdcavity$ blockMesh$ icoFoam$ paraFoam

Herewego!Enjoy!

Source pack installation of OpenFOAM.4.0 into RHL

Engineering