Sommer Cable Catalog Deel 4 - Modular Syst. + Active Components + Mechanics & Accessories

SYSBOXX MKIITHE NEW MODULAR DIMENSION:

+++ Compatible with DIN 41494

+++ Additional installation level

+++ Optimized EMC-safety

+++ Absolutely solid with a panel thickness of 2.5 mm

Please note:Independent assembly of distribution systems and systems with our SYSBOXX- components is at your own risk. SOMMER CABLE is not responsible for personal and material damages resulting from customer non-observance of the generally applicable guidelines.The guidelines set forth in DIN VDE 0100, Parts 410, 430 ff., as well as DIN VDE 0701, DIN VDE 0702 must be observed.

MODULAR SYSTEMS

ONLINE-configurator with saving

option and SYSBOXX-specific

downloads are available under

www.sysboxx.com

www.sommercable.com · [email protected]

SYST

SYP

SYP

SYST

SYPV

SYPV

SYFB

SYFB

SYFB

MOD

ULAR

SYS

TEM

SMODULAR SYSTEMS

The compact design... of the system is really surprising. You can e.g. fit a 24 in 8 stage box with round or square multipins in an incredibly small 2 HU casing. The SYSBOXX can be configured as a 19“ system or a floor and wall box with variable width, and the 2 or 3 HU modules can be enlarge to a multiple of their height (possible height units: 2 HU, 3 HU, 4 HU, 6 HU, 8 HU) with the connection profile.Standard casing depth is 80 mm or 140 mm.

Which plug?On the following pages, plug connectors and looms suitable for the SYSBOXX are identified with our SYSBOXX-logo – you can realise the

most adventurous configurations. Some examples are shown under

www.sysboxx.com

• Time saving through short installation and configuration times

• Large range of modules

• Easy to install through pre-cut threads and simple internal wiring using flat ribbon cables

• Attractive appearance through sunken screwheads

and appealing anthracite coating

• Clean and individual labelling option

• Clear layout

• Absolute modularity (front, back, side)

• Compact design (2 HU base – even with LK150-pole)

• High stability through sandwich construction and 2.5 mm thick front panel gauge

• Perfect user support through web configurator at www.sysboxx.com

• 5 year functional warranty

• Absolute compatibility with DIN 41494 parts 1, 2 and 5 for integration of standard components. 7 PU (partial units) are equivalent to 1 WU (width unit) of the SYSBOXX MKII. 19“ = 84 PU = 12 WU

• Additional installation levels in the 140 mm deep housing – ideal for fitting transformers, electronics, top-hat rail adaptation etc.

• Optimised EMC security

• RoHS conformity

• Active components (SYSBOXX 19/4 series) such as mixer, headphone amp can be integrated

The inside wiring... for the audio connectors are simple 14- or16-pin flat belt cables (crosstalkdamping 100 dB – measured on an openinput), usually with separate grounding andan additional ground wire for the casing. The flat plug has genuine gold-plated contacts (Protection Class 2) and a lock that ensures safety even during tough stage operation. The receptacles on the boards are clearly identified and numbered.

The secret... is a stable and compact sandwich design made up of two specially developed coated SYP-profiles for installation with our SYF-panels at the front and rear and SYS-side panels from our extensive program.

Our service:Your can use our web-configurator under www.sysboxx.com to design your SYSBOXX according to your very own requirements or simply tell us what they are. We will be glad to send you a purchase offer covering all the required components. You can also order the SYSBOXX completely installed and pre-wired. The installation prices include a SOMMER CABLE 5 Year Functional Warranty.

PRODUCT ADVANTAGES compared to systems available on the market:

Now everyone gets what they deserve!Regardless of what your business is, live event or media technologies, the installation sector or A/V broadcasting. The SYSBOXX will fulfil all of yourexpectations:For example – your customer wants to connect a mixing board, a beamer, a DMX-controlled coffee maker (?!), two PC‘s with flat screen, two mice with cheese and a transmission vehicle up to one box. Now it is possible – thanks to the SYSBOXX.With the new MKII-version you can even realise industrial applications incompliance with DIN41494.

The front panels... are made of 2.5 mm sheet

steel, which is powdercoated on the front only. Due to the strength

of the material they are almost unbreakable and they are available in

unloaded and loaded, fully wired versions. The screws, for the most part self-tapping, are flush countersunk

and furnished with a Torx drive. The punchholes for the connectors are largely, which significantly minimises the installation time and

renders counter nuts superfluous.

SYSBOXX MKII – THE MODULAR BOX WITH SYSTEM

SYP Special profilesSYF Front panelsSYS Side panels

www.sommercable.com · [email protected] 367

phot

os: A

xel K

latt

MOD

ULAR

SYS

TEM

S

MODULAR SYSTEMS

DIN41494-compatible SYSBOXX system applications

“In the day-to-day rental business the fl exible options of the SYSBOXX system have fi tted in perfectly with our rental range. Especially the varying system cabling requirements for special jobs can be covered very well with this system.“

Arne Dulas (Managing director) Event-Solution Events Technology www.event-solution.de

“The SYSBOXX system has made our stage cabling a lot easier. The modularity of the

SYSBOXX enabled us to place the connections on the front or back as required to create a super compact, fl exible and clear splitter system. In addition, the Lundahl transformers ensure the stress-free operation.“

Olaf Heyer (Production manager) Fettes Brot www.fettesbrot.de

“The connection columns fi t in perfectly with our facilities. They provide the various connections in the required positions – and they look really good, too. The stability is another advantage – we would never have been able to achieve that with a dado trunking.“

Pit Pressler (Planning manager)DüsseldorfCongress www.duesseldorfcongress.de

“The installation of the media columns – which consist of SYSBOXX components – was easy as pie. We were able to fi nish the installation in next to no time. Owing to high degree of modularity it was possible to implement changed customer wishes right up to the end of the installation.“

Christian Rondinone (Project manager)ELOMECH Elektroanlagen www.elomech.de

“The SYSBOXX system offers me a previously unknown modularity. Now it‘s easy to set up connection and media wall boxes, for which you can choose from a comprehensive modular range. This has also the advantage for home-builders as there‘s no longer need for expensive and time-consuming special structures and it‘s easy to add attachments at a later date. In this special case, the request for a fl oor-to-ceiling connection column has been met perfectly.”

Jörg Sanftl (Specialist planner) E.Ingenieure www.epunkt-ingenieure.de

User reviews of SYSBOXX modular system


SYST

SYP

SYPSYST

SYPVSYPV

SYFB

SYFB

SYFB

SYP

SYPV

– Subject to change • See the price list for prices • The General Terms and conditions apply (see www.sommercable.com) –

MOD

ULAR

SYS

TEM

SMODULAR SYSTEMS

SYSBOXX MKII CASING PROFILES

ORDER NO. DESCRIPTION WIDTH SYP2-12 SYSBOXX standard profile, 140 mm depth 19“ = 12 WU = 427 mm ( 84 HP) SYP2-06 SYSBOXX standard profile, 140 mm depth 9.5“ = 6 WU = 214 mm ( 42 HP) SYP2-03 SYSBOXX standard profile, 140 mm depth 3 WU = 107 mm ( 21 HP) SYP1-12 SYSBOXX standard profile, 80 mm depth 12 WU = 427 mm ( 84 HP) SYP1-11 SYSBOXX standard profile, 80 mm depth 11 WU = 392 mm ( 77 HP) SYP1-10 SYSBOXX standard profile, 80 mm depth 10 WU = 356 mm ( 70 HP) SYP1-09 SYSBOXX standard profile, 80 mm depth 9 WU = 321 mm ( 63 HP) SYP1-08 SYSBOXX standard profile, 80 mm depth 8 WU = 285 mm ( 56 HP) SYP1-07 SYSBOXX standard profile, 80 mm depth 7 WU = 249 mm ( 49 HP) SYP1-06 SYSBOXX standard profile, 80 mm depth 6 WU = 214 mm ( 42 HP) SYP1-05 SYSBOXX standard profile, 80 mm depth 5 WU = 178 mm ( 35 HP) SYP1-04 SYSBOXX standard profile, 80 mm depth 4 WU = 143 mm ( 28 HP) SYP1-03 SYSBOXX standard profile, 80 mm depth 3 WU = 107 mm ( 21 HP) SYP1-02 SYSBOXX standard profile, 80 mm depth 2 WU = 72 mm ( 14 HP) SYP1-01 SYSBOXX standard profile, 80 mm depth 1 WU = 36 mm ( 7 HP)

SYSBOXX MKII standard profiles ALUMINUM (width unit 1 WU = 35.6 mm)

SYSBOXX MKII connecting profiles aluminum – for multiple height

ORDER NO. DESCRIPTION WIDTH SYPV-12 SYSBOXX connecting profile 12 WU = 427 mm ( 84 HP) SYPV-11 SYSBOXX connecting profile 11 WU = 392 mm ( 77 HP) SYPV-10 SYSBOXX connecting profile 10 WU = 356 mm ( 70 HP) SYPV-09 SYSBOXX connecting profile 9 WU = 321 mm ( 63 HP) SYPV-08 SYSBOXX connecting profile 8 WU = 285 mm ( 56 HP) SYPV-07 SYSBOXX connecting profile 7 WU = 249 mm ( 49 HP) SYPV-06 SYSBOXX connecting profile 6 WU = 214 mm ( 42 HP) SYPV-05 SYSBOXX connecting profile 5 WU = 178 mm ( 35 HP) SYPV-04 SYSBOXX connecting profile 4 WU = 143 mm ( 28 HP) SYPV-03 SYSBOXX connecting profile 3 WU = 107 mm ( 21 HP) SYPV-02 SYSBOXX connecting profile 2 WU = 72 mm ( 14 HP) SYPV-01 SYSBOXX connecting profile 1 WU = 36 mm ( 7 HP)

SYSBOXX MKII theading strips (2 pcs. per standard profile)ORDER NO. DESCRIPTION SYGS-12 SYSBOXX threading strips 12 WU = 19“ ( 84 HP) SYGS-06 SYSBOXX threading strips 6 WU = 9.5“ ( 42 HP)

SYSBOXX MKII labelling profiles for top or bottom installationfor labeling strips 6 – 7 mm high and 426 mm longORDER NO. DESCRIPTION SYPS-03-MK2 SYSBOXX labelling profile 3 WU = ¼ 19“ SYPS-12 SYSBOXX labelling profile 12 WU = 19“ SYPK-12 SYSBOXX tranparent strips 12 WU = 19“ for labelling profile NSSB-01-48 12 labelling strips with successive numbering in a 4-grid, 4.6 mm high

SYSBOXX MKII ground setConsisting of: 1 x brass screw M4 x 16 + 2 x brass nuts M4 + 1 x serrated washer 4.3 x 8, + 2 x brass washers 4.3 x 9 + 1 x PE-sticker (installation on side panel SYS)ORDER NO. DESCRIPTION SY-PE-SET SYSBOXX ground set

SYSBOXX MKII complete housing construction kits for rack or wall installationconsisting of: 2 x standard profiles + 2 side panels with rack ear + 4 threaded inserts + earthing kit and screw setORDER NO. DESCRIPTION SYG12-01-02 SYSBOXX housing construction kit 19”, 2 HU, depth approx. 80 mm SYG12-02-02 SYSBOXX housing construction kit 19”, 2 HU, depth approx. 140 mm SYG12-01-04 SYSBOXX housing construction kit 19”, 4 HU, depth approx. 80 mm SYG12-02-04 SYSBOXX housing construction kit 19”, 4 HU, depth approx. 140 mm SYG12-01-06 SYSBOXX housing construction kit 19”, 6 HU, depth approx. 80 mm SYG12-02-06 SYSBOXX housing construction kit 19”, 6 HU, depth approx. 140 mm SYG12-01-08 SYSBOXX housing construction kit 19”, 8 HU, depth approx. 80 mm SYG12-02-08 SYSBOXX housing construction kit 19”, 8 HU, depth approx. 140 mm SYG06-01-02 SYSBOXX housing construction kit 9.5”, 2 HU, depth approx. 80 mm SYG06-02-02 SYSBOXX housing construction kit 9.5”, 2 HU, depth approx. 140 mm

Labeling strips mounted on SYS panel


SYST

1 2

3

5 6

7

4

SYST

A

NEW!

A

B

C


MOD

ULAR

SYS

TEM

S

MODULAR SYSTEMS

SYSBOXX MKII SIDE PANELSSYSBOXX MKII SIDE PANELS – please order 2 for each SYSBOXX !

Application SYST22-LR90

ORDER NO. DESCRIPTION SYST21-L Side panel, 2 HU, 80 mm depth, blank panel

1 SYST21-LK24 Side panel, 2 HU, 80 mm depth, 1 x LK24/25 (CIR-size 24)

2 SYST21-LK37 Side panel, 2 HU, 80 mm depth, 1 x LK37 Tourlock (CIR-size 28)

3 SYST21-LK85 Side panel, 2 HU, 80 mm depth, 1 x LK85/LK150 Tourlock soldered/crimped version

4 SYST21-PG29 Side panel, 2 HU, 80 mm depth, 1 x PG29

5 SYST21-SOCA19 Side panel, 2 HU, 80 mm depth, 1 x SOCAPEX 19-pole

SYST21-SP Side panel, 2 HU, 80 mm depth, 1 x NL4/8MPR, NLT4, EP connector, LK 8-pole

SYST22-L Side panel, 2 HU, 140 mm depth, blank panel


SYST42-L Side panel, 4 HU, 140 mm depth, blank panel 6 SYST41-MP06/10 Side panel, 4 HU, 80 mm depth, 1 x MP06/MP10 ILME, Harting





ORDER NO. DESCRIPTION 7 SYST21-LR Side panel, 2 HU, 80 mm depth, blank panel, rack angle

SYST21-LR90 Side panel, 2 HU, 80 mm depth, 1 x PG29, rack angle for installation above and below the table (turned by 90°)

PGA29 PG29 – Cover plate, plastic

SYST22-LR Side panel, 2 HU, 140 mm depth, blank panel, rack angle

SYST22-LR90 Side panel, 2 HU, 140 mm depth, 1 x PG29, rack angle for installation above and below the table (turned by 90°)







SYSBOXX MKII SIDE PANEL WITH RACK ANGLE

Cassettes are “hip” again......for the SYPI cassette profile does not only provide a scoop-proof partitioning in the SYSBOXX housing (e.g. when using current-carrying combi systems), but can also be used quite easily as a practical compact housing (H x W: 68,6 mm x 35,4 mm) with guide slots for locking pc boards. Simply order two extra cover plates and you’re done. Cutouts are available on request.

ORDER NO. DESCRIPTION REQUIRED SCREWS

A SYPI-1 SYSBOXX cassette profile, 1 WU, for 2 HU modules, 68 mm deep

8 x S-G2,5X08C-TS included

SYPI-2 SYSBOXX cassette profile, 1 WU, for 2 HU modules, 128 mm deep

8 x S-G2,5X08C-TS included

B SYPFB1-L Blank panel, 1 WU, H x W: 68.6 mm x 35.4 mm 4 x S-G2,5X08C-TS

C SYPFB1-2D Front panel, 1 WU, H x W: 68.6 mm x 35.4 mm, 2 x D-type 90° rotated

4 x S-M2,5x10S-TS


1

2

NEW!


MOD

ULAR

SYS

TEM

SMODULAR SYSTEMS

THE UNIVERSAL INSTALLATION OPTION FOR AUDIO DISTRIBUTION

With the SYSPANEL and the new SYSPANEL5 you can quickly and easily set up patch panels, device connector panels or interchange points, e.g. in control or equipment rooms. At the same time, the SYSPANEL can be equipped with four of our standard circuit board modules, and the SYSPANEL5 can be variably fi tted with up to 5 SYSBOXX front panels (1 WU). These are shown on the following pages.The circuit board modules are available as 4-channel boards with Neutrik 3-pole or 5-pole XLR, as A or B series (male or female). The modules are available with 12 cutting terminals (LSA technology) or 12 terminals in lift technology on the rear side. They can also be fi tted with Neutrik EtherCon-RJ45 using the SBC13-EBL circuit board module, enabling the combination of an audio, DMX and

network patch panel on just 1 HU. For conductor strain relief the housing is fi tted with 28 metal reeds where cable ties can be attached. The PE is provided by an M4 earth bolt.Individual labelling is possible with our SYSBOXX labelling profi le. The SYSPANEL can be closed from above with the optional (SYSPAN-C) cover.The labelling profi le and the XLR modules are secured with time-saving, self-tapping M2.5 Torx screws. These are also available as screw sets on the following pages.

PRODUCT BENEFITS:• High packing density on 1 HU• High flexibility owing to a large selection of front panels (e.g. for building a patch

panel for a media server)• Flexible, quick fitting• Can be retrofitted and therefore future-proof

ORDER NO. DESCRIPTION 1 SYSPAN SYSPANEL housing 19”, 1 HU installation

housing (without cover)2 SYSPAN5 SYSPANEL housing 19”, 1 HU for 5 SYSBOXX

front panel 1 WU (without cover)

SYSPAN-C Cover for SYSPANEL

SBC13-XA3FA A series XLR 3-pole 4 x Neutrik female p 12 lift terminals + 14-pole blade terminal

SBC13-XA3FL A series XLR 3-pole 4 x Neutrik female p 12 LSA

SBC13-XA3MA A series XLR 3-pole 4 x Neutrik male p 12 lift terminals + 14-pole blade terminal

SBC13-XA3ML A series XLR 3-pole 4 x Neutrik male p 12 LSA

SBC13-XB3FA B series XLR 3-pole 4 x Neutrik female p 12 lift terminals + 14-pole blade terminal

SBC13-XB3FL B series XLR 3-pole 4 x Neutrik female p 12 LSA

SBC13-XB3MA B series XLR 3-pole 4 x Neutrik male p 12 lift terminals + 14-pole blade terminal

SBC13-XB3ML B series XLR 3-pole 4 x Neutrik male p 12 LSA

SBC13-XB5FA B series XLR 5-pole 4 x Neutrik female p 12 lift terminals + 14-pole blade terminal

SBC13-XB5FL B series XLR 5-pole 4 x Neutrik female p 12 LSA


SBC13-XB5ML B series XLR 5-pole 4 x Neutrik male p 12 LSA

SBC13-EBL EtherCon 4 x Neutrik female p 32 LSA

S-P3,0x08A-TS Screw set A series/EtherCon, Combo 25 x M2.5 x 10 counter screws Torx 8 f. modules – per item.

S-G2,5x08C-TS Screw set B series, 25 x M2.5 x 10 Torx 8 coun-tersunk screws for modules - per item.

SYPS-03-MK2 Labelling profile 3 WU (¼ x 19”)

NSSB-01-48 Labelling strip channel 1 – 48

Mounting example

Mounting example


NEW!

1

3

2

NEW!


MOD

ULAR

SYS

TEM

S

MODULAR SYSTEMS

ORDER NO. DESCRIPTION 1 SYSBOARD18 Light grey RAL 7035

3 SYSBOARD18-A Anthracite RAL 7016

All on BOARD…if you have the SYSBOARD installation housing for wall mount.This enables the installation of classic offsets with SYSBOXX components. Owing to the 100 mm offset mounting position even a multipin connector may remain plugged in despite the door being closed.The bottom of the housing also has a 154 x 30 mm opening for the supplied cable brush bushing to lead out cables also with the box closed (picture no. 2).The door has a convertible stop variable closing position and can be locked with a square-section key (also available with a lamella locking cylinder plate barrel with up to 200 different closures positions).The housing sits either “on-wall” (picture no. 3) or can also be recessed in 2 positions into the wall using the supplied mounting brackets.Inside the SYSBOARD a large number of SYSBOXX front panels with up to 48 XLR-type-D can be fi tted on a width of 9.5“ (6 WU) and 3 x 2 HU. Openings for the cable insertion are located on the back as well as on the rear bottom and can also be fi tted with SYSBOXX front panels (see next page) on a width of 6 WU (9.5“) each. The front panels are secured by M2.5 self-tapping countersunk screws. Please order separately. IP44 protection class is achieved when closed (with installed fl oor panel). Our new active components such as mixers, headphone amps etc. (SYSBOXX19/4 series) can also be integrated here. Further information can be found in the “Active components”section.

Standard colours: RAL 7035 (light grey) and RAL 7016 (anthracite).Other standard RAL colours are available at additional cost.Dimensions [W x H x D] approx. 220 x 267 x 257 mm (incl. mounting bracket: approx. 267 x 267 x 257 mm).Installation depth at mounting position 2: approx. 212 mm, installation depth at mounting position 3: approx. 238 mm. Supplied accessories: Cable brush bushing, cover panel (if no brush is required), 2 fi xing brackets, square-section key for sash lock, screw set.

SYSBOARD – THE MODULAR WALL HOUSING

”We have developed the SYSBOARD18 as customers have often asked for a modular junction box where you don‘t have to wield a drill. This also put the various requirements of planners into focus.

The result is a fully modular connection box that can replace nearly all types of junction boxes.“

Peter RieckSales & Product Management


1SYSFLOOR-06

SYSFLOOR-04

3

2

SYSFLOOR-03


MOD

ULAR

SYS

TEM

SMODULAR SYSTEMS

FLOOR TANK INSERT WITH SYSTEM

For configuration examples see: www.sysboxx.com

Application example

Application example

The ideal, extremely stable mounting frame for integrating audio/video/media and domestic installation connections in floor tank connection units.SYSFLOOR is available in three different versions:

1. The SYSFLOOR-06 can be fitted on 9.5”, 6+2+2 WU with up to 16 x D-flange plus, for example, 2 additional Schuko positions as required and provides optimum installation options due to the stable strain relief ring with 19 cable fixing positions.

2. The SYSFLOOR-04 can accommodate up to 10 x D-flange or appropriate media interfaces on 4 WU.

3. The SYSFLOOR-03 can accommodate up to 8 x D-flange or appropriate media interfaces on 3 WU.

The insert size of the SYSFLOOR-03 is equal to a GB2 mounting box (or a GB3 mounting box with the SYSFLOOR-04 resp.). This makes it possible to install SYSBOXX together with domestic installation components in one box.The insert size of the SYSFLOOR-06 is equal to 3 GB3 mounting boxes. Due to the slanted connection plane the cover of the floor tank can be closed even with plugged-in multipin connectors*. Owing to the generous space conditions power supplies and active converters (or the like) can be neatly tucked away in the floor box.

ORDER NO. DESCRIPTION GESR9/10U ACKERMANN device, plastic, RAL9011 GESRA9/10U ACKERMANN device, aluminum GES4BG ACKERMANN fixing units for GESRA9/10U GES9-2 ACKERMANN device, plastic, square, RAL9011

ACKERMANN DEVICES

ORDER NO. DESCRIPTION 1 SYSFLOOR-03 Mounting frame for floor tank, 3 WU, suitable

for all SYSBOXX front panels2 SYSFLOOR-04 Mounting frame for floor tank, 4 WU , suitable

for all SYSBOXX front panels3 SYSFLOOR-06 Mounting frame for floor tank, 6 WU , suitable

for all SYSBOXX front panels

The mounting frames are compatible with round and square OBO BETTERMANN/ACKERMANN equipment inserts (e.g. GESR9) and fitted with fixing holes in the 5.08 mm spacing (for self-tapping M2.5 screws) and installation accessories. The PE connection requires an earth bolt and naked, conductive locating surfaces for the front panels.SYSFLOOR-03/-04 are supplied with 25 front panel screws, the SYSFLOOR-06 comes with 50 front panel screws. The matching front panels for individual loading are shown on the following pages.

Incl. installation material

NEW!


3

4

5


MOD

ULAR

SYS

TEM

S

MODULAR SYSTEMS

Also

ava

ilable in white !

Mr Clean…brings order and tidiness onto your desk and into every conference room.

The SOMMER CABLE SYSDESK 09 has a stable, stainless steel or powder-coated

full metal housing, which can be fi tted with all available 2 HU SYSBOXX front panel modules. This

ensures maximum versatility and you can always keep up with new market standards. A total of 9 width units can be

fi tted.The corresponding connector modules and front panels are

shown on the following pages. Our installation recommendations are recognisable by the SYSDESK logo.

However, the inner values of the table insert box are not to be dismissed, either: The SYSDESK-09 has an integrated cable strain relief, an anti-dust brush in the connector feed slot as well as an innovative table fastening (table top thickness from 10 mm to almost unlimited). For use with mains power connectors the SYSDESK-09 can be earthed throughout. We recommend the super compact triple power outlet module (SYCFB24-3SCHU-WL) with rear Wieland mains connectors which enable a simple cascading of several consolidation points.Optionally the SYSDESK is available in a locking version (order code “-L“). This will save every school caretaker from the annoying task of removing chewing gum leftovers in sockets.Models ex works are available in brushed stainless steel, anthracite RAL 7016 fi ne structure, pure white RAL 9010 fi ne structure and stainless steel look RAL 7048 polished.

The housing is also available in all other RAL colours – please contact us to discuss your project.

Dimensions [W x L x D]: 193 mm x 352 mm x 93 mmCut out size [W x L]: 170 mm x 344 mmMax. installation depth behind front panels: 80 mm PRODUCT BENEFITS:• Stable, scratch-resistant full metal version• Harmonious table integration• High flexibility through modular construction• Can be subsequently reconfigured• Easy installation via innovative terminal mechanics• PE connection• Cascadable mains connection APPLICATIONS:• Installation in conference and training tables as well as media technical

workplaces

ORDER NO. COLOR/VERSION1 SYSDESK09 anthracite RAL 70162 SYSDESK09-WS pure white RAL 90103 SYSDESK09-EO stainless steel look RAL 70484 SYSDESK09-L anthracite RAL 7016, lockable

SYSDESK09-L-WS pure white RAL 9010, lockable

SYSDESK09-L-EO stainless steel look RAL 7048, lockable5 SYSDESK09-HQ stainless steel housing, brushed

More table mounting systems with simple, compact designs plus stainless steel front versions can be found on the following SYSWALL system pages. Complete with 40 screws for installing the front panels.

2

1


SYFB

11

10

14

13

127

5

9

6

8

15

16

17

18

19

3

4

1

2


MOD

ULAR

SYS

TEM

SMODULAR SYSTEMS

SYSBOXX MKII FRONT PANELS

ORDER NO. DESCRIPTION1 SYFB21-1DA Front panel, 2 HU, 1 WU, 1 x D-type angled2 SYFB21-1KD Front panel, 2 HU, 1 WU, 1 x cable feed Ø 12 mm

4 x incl. guide sleeves3 SYFB21-2D Front panel, 2 HU, 1 WU, 2 x D-type 90° angled4 SYFB21-3KEYSTONE Front panel, 2 HU, 1 WU, 3 x Keystone 90° angled5 SYFB21-3M12 Front panel, 2 HU, 1 WU, 3 x M12 borehole for BNC/RCA RCA/S-VHS etc.6 SYFB21-DVI Front panel, 2 HU, 1 WU, 1 x DVI + M6 x 0.5 thread for RCA 3.5 mm jack7 SYFB21-GF Front panel, 2 HU, 1 WU, 1 x fibre glass combi insert8 SYFB21-L Front panel, 2 HU, 1 WU, blank panel9 SYFB21-PG21 Front panel, 2 HU, 1 WU, 1 x PG21

10 SYFB21-SUB09HDMI Front panel, 2 HU, 1 WU, 1 x HDMI, 1 x SUB-D09 + M6 x 0.5 thread for RCA 3.5 mm jack11 SYFB21-SUB25 Front panel, 2 HU, 1 WU, 1 x SUB-D 2512 SYFB22-CEE3/SCH Front panel, 2 HU, 2 WU, 1 x CEE3-16/earthed13 SYFB22-L Front panel, 2 HU, 2 WU, blank panel14 SYFB22-LK24 Front panel, 2 HU, 2 WU, 1 x LK24/25 (CIR size 24)15 SYFB22-LK37 Front panel, 2 HU, 2 WU, 1 x LK37 (CIR size 28)16 SYFB22-PG29 Front panel, 2 HU, 2 WU, 1 x PG2917 SYFB22-SOCA19 Front panel, 2 HU, 2 WU, 1 x Socapex 19-pole18 SYFB22-SP Front panel, 2 HU, 2 WU, 1 x NL4/8MPR, NLT4, EP-connector, LK 8-pole19 M12-CAP-7016 M12 cap for SYFB21-3M12

2 HU FRONT PANELS (width unit WU = 35.6 mm 7 TE) – for installation on SYSBOXX MKII front and back

The front panels can be individually equipped with many standard connectors and provide your SYStem with a universal connector panel. Many adapters, cable splices and connectors with screw terminals see chapter connectors. Also available are loaded, fully wired modules – see next pages. For each front panel four S-M2-TS 5x10S screws are needed.The front-panel SYFB21-1KD has a grommet for feeding through your connecting cables directly.

Also recommended for:

NEW!

NEW!


SYFB

NEW!

NEW!

20 3428

30

29

31

33

32

35

23

22

25

26

27

24

2121


MOD

ULAR

SYS

TEM

S

MODULAR SYSTEMS

required front panel screws

ORDER NO. DESCRIPTIONArt.-No.

S-M2,5x10S-TS20 SYFB23-2SIEM30 Front panel, 2 HU, 3 WU, 2 x SIEMENS male/female connecting strip 6 x 21 SYFB23-6BNC-A Front panel, 2 HU, 3 WU, 6 x BNC ½“ 6 x 22 SYFB23-8A Front panel, 2 HU, 3 WU, 8 x A/B type 6 x

AP-4A-N Cover panel for SYFB23-8A for 4 x A/B type –23 SYFB23-8D Front panel, 2 HU, 3 WU, 8 x D-type 6 x 24 SYFB23-CEE5 Front panel, 2 HU, 3 WU, 1 x CEE, 5-pole 6 x 25 SYFB23-L Front panel, 2 HU, 3 WU, blank panel 6 x 26 SYFB23-LK85/150 Front panel, 2 HU, 3 WU, 1 x LK85 pole/LK150 pole (CIR size 40) 6 x 27 SYFB23-MP06 Front panel, 2 HU, 3 WU, 1 x MP06 ILME, Harting 6 x 28 SYFB23-INST Front panel, 2 HU, 3 WU, for cavity wall socket 6 x 29 SYFB24-3SCHU Front panel, 2 HU, 4 WU, 3 x earth SNAP IN SCHU-FP230/16SNG –30 SYFB24-MP06/10 Front panel, 2 HU, 4 WU, 1 x MP06/MP10 ILME, Harting 8 x 31 SYFB25-2INST Front panel, 2 HU, 5 WU, for cavity wall double socket 10 x 32 SYFB25-MP16/24 Front panel, 2 HU, 5 WU, 1 x MP16/MP24 ILME, Harting 10 x 33 SYFB26-L Front panel, 2 HU, 6 WU, blank panel 9.5“ 12 x 34 SYFB2X-L Front panel, 2 HU, 12 WU, blank panel over entire 19“ width 10 x 35 M12-CAP-7016 M12 cap for SYFB23-6BNC-A –

2 HU FRONT PANELS (width unit WU = 35.6 mm 7 TE) – for mounting front and back SYSBOXX MKII

SYSBOXX MKII FRONT PANELS 3 WU – 12 HU

Also recommended for:


4

7

17

8 9

18

16

5 6

10

14

12 13

11

15

1

3

22

16


MOD

ULAR

SYS

TEM

SMODULAR SYSTEMS

SYSBOXX MKII CONNECTOR/SWITCH MODULE – incl. SYFB front panel

ORDER NO. CONNECTOR MODULE 2 HU, 1 WU1 SYCFB21-DVI-C1 DVI fem. —> 0.15 m breakout cable DVI fem.

+ 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 2 x RCA/RCA fem.

2 SYCFB21-DVI-C3 DVI fem. —> 0.15 m breakout cable DVI fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 3.5 mm stereo mini jack fem.

SYCFB21-DVI-S DVI fem. + 3.5 mm stereo mini jack fem. —> Plug-in/screw terminal

3 SYCFB21-HD-C HDMI fem. —> 0.15 m breakout cable HDMI fem.

4 SYCFB21-HD-P HDMI fem. —> Patch HDMI fem.

SYCFB21-HD-S HDMI fem. —> Plug-in/screw terminal

5 SYCFB21-C3A-P 3 x RCA/RCA fem. —> Patch 3 x RCA/RCA fem. A/V

6 SYCFB21-C3Y-P 3 x RCA/RCA fem. —> Patch 3 x RCA/RCA fem. YUV

7 SYCFB21-SVC2-P B series XLR 5-pole 4 x Neutrik female p 12 lift terminals + 14-pole blade terminal

8 SYCFB21-SWPT Switch on/off, 6A/250 VAC + stereo volume potentiometer 50 kΩ, 90 dB —> solder contacts

9 SYCFB21-VGA-AMP VGA + audio amplifier incl. power unit and PE —> 0.25 m breakout cable VGA fem.

10 SYCFB21-VGA-C1 VGA fem. —> 0.15 m breakout cable VGA fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 2 x RCA/RCA

11 SYCFB21-VGA-C2 VGA fem. —> 0.2 m breakout cable 5 x BNC fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 2 x RCA/RCA fem.

12 SYCFB21-VGA-C3 VGA fem. —> 0.2 m breakout cable VGA fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 3.5 mm stereo mini jack fem.

13 SYCFB21-VGA-C4 VGA fem. —> 0.2 m breakout cable 5 x BNC fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 3.5 mm stereo mini jack fem.

14 SYCFB21-VGA-C5 VGA fem. —> Patch VGA fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 2 x RCA/RCA fem.

15 SYCFB21-VGA-C6 VGA fem. —> Patch VGA fem. + 3.5 mm stereo mini jack fem. —> 0,15 m breakout cable 3.5 mm stereo mini jack fem.

16 SYCFB21-VGA-S VGA fem. + 3.5 mm stereo mini jack fem. —> Plug-in/screw terminal

Front Back

Front Back

ORDER NO. CONNECTOR MODULE 2 HU, 4 WU17 SYCFB24-3SCHU 3 x snap-in Schuko sockets

SCHU-BSNG Contact protection for snap-in sockets

SYCFB24-3SCHU-F 3 x snap-in sockets,French/Belgian standard

SYCFB24-3SCHU-FW 3 x snap-in sockets,French/Belgian standard —> Wieland GSD18 mains connection, scoop-proof + cascadable

18 SYCFB24-3SCHU-WL 3 x snap-in Schuko sockets —> Wieland GSD18 mains connection, scoop-proof + cascadable

Wieland mains connection cable with 3 x 1.5 mm² cable black Wieland ST18/3 socket p Wieland ST18/3 plug

ORDER NO. LENGTHW1W2-0050 0.5 m W1W2-0100 1.0 m W1W2-0150 1.5 m

W1W2-0300 3.0 m

Wieland GST1813 socket p Angled Schuko plug

ORDER NO. LENGTHW1SC-0200 2.0 m W1SC-0300 3.0 m

W1SC-0500 5.0 m

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!


4

SBC13-4XM1:1L

SBC13-4XF1:1L

1

3

2


MOD

ULAR

SYS

TEM

S

MODULAR SYSTEMS

SYSBOXX MKII Transformer ModulesSYSBOXX MKII Transformer modules are ideally suited for applications where electrical separation is required. Next to the previous modules, we now offer the SBC13-4XM1:1L, a line-output transformer module with +22 dBU max. level. For our cost conscious users, we offer a 1:1 module, the SBC13-4XF1:1S.

Transformer data:

SOMMER SPLIT Lundahl LL1570 Lundahl LL5402Application Microphone transformer Microphone transformer Line transformer

Max. level +12 dBU +16 dBU +22 dBU

Distorsion < 1% @ +12 dBU, 40 Hz < 1% @ +16 dBU, 50 Hz 0.1% @ +22 dBU, 50 Hz

Electrical strength 500 V (winding/winding) 4 kV (winding/winding)2 kV (winding/shielding)

4 kV (winding/winding)2 kV (winding/shielding)

Frequency response 40 Hz –15 kHz ± 0.5 dB

10 Hz – 200 kHz ± 0.5 dB

20 Hz – 40 kHz ± 0.3 dB

ORDER NO. DESCRIPTION

suitable front panels (order separately)

SBC13-4XF1:1S Splitter module 1 HU, 3 WU, 4 x XLR-female, B-Series, 1:1 SOMMER CABLE transformer, 2 flat plugs, 14-pin

SBFB23-8A/SYFB23-8A (2 pcs.)

SBC13-4XF1:1+1S Splitter module 1 HU, 3 WU, 4 x XLR-female, B-Series, 1:1+1 SOMMER CABLE transformer, 3 flat plugs, 14-pin

SYFB23-8A(2 pcs.)

SBC13-4XF1:1+1L Splitter module 1 HU, 3 WU, 4 x XLR-female, B-Series, 1:1+1 LUNDAHL transformer, 3 flat plugs, 14-pin

SYFB23-8A(2 pcs.)

SBC13-4XM1:1L Splitter module 1 HU, 3 WU, 4 x XLR-male, B-Series, 1:1 LUNDAHL transformer, 1 flat plug, 14-pin

SBFB23-8A/SYFB23-8A (2 pcs.)

SYSBOXX MKII CONNECTOR MODULE with blade terminal connection – including SYFB front panel

ORDER NO. CONNECTOR MODULE 2 HU1 SYCFB22-LK08F 2 WU, 1 x LK 8-pole fem., CA-COM compatible,

6.3 mm push-on blade connectorsincl. SYFB22-SP

SYCFB22-LK08M 2 WU, 1 x LK 8-pole fem., CA-COM compatible, 6.3 mm push-on blade connectors

incl. SYFB22-SP

SYCFB22-LK08FR 2 WU, 1 x LK8-pole female o. union nut, CA-COM compatible, 6.3 mm push-on blade con.

incl. SYFB22-SP

SYCFB22-LK24F 2 WU, 1 x LK 24-pole female, 2 push-on blade con. 14-pole incl. SYFB22-LK24

SYCFB22-LK24M 2 WU, 1 x LK 24-pole male, 2 push-on blade con. 14-pole incl. SYFB22-LK242 SYCFB22-LK37F 2 WU, 1 x LK 37-pole female, 3 push-on blade con. 14-pole incl. SYFB22-LK37

SYCFB22-LK37M 2 WU, 1 x LK 37-pole male, 3 push-on blade con.14-pole incl. SYFB22-LK37

SYCFB22-NL8 2 WU, 1 x NL8MDV, 6.3 mm push-on blade con. incl. SYFB22-SP

SYCFB23-LK85F 3 WU, 1 x LK 85-pole female, 7 push-on blade con. 14-pole

incl.SYFB23-LK85/150

SYCFB23-LK85M 3 WU, 1 x LK 85-pole male, 7 push-on blade con. 14-pole


3 SYCFB23-LK150M 3 WU, 1 x LK 150-pole male, 12 push-on connectors 14-pole


SYSBOXX MKII CONNECTOR MODULE with flat push-on blade connection – including SYST side panel

ORDER NO. CONNECTOR MODULE 2 HU, 80 MM DEEPSYCST21-LK08F 1 x LK 8-pole female, 2 push-on blade con. 14-pole incl. SYST21-SP

SYCST21-LK08M 1 x LK 8 pole-male, 2 push-on blade con. 14-pole incl. SYST21-SP

SYCST21-LK08FR 1 x LK 8-pole female o. cap nut,2 push-on blade connectors

incl. SYST21-SP

4 SYCST21-LK24F 1 x LK 24-pole female, 2 push-on blade con. 14-pole incl. SYST21-LK24

SYCST21-LK24M 1 x LK 24-pole male, 2 push-on blade cons. 14-pole incl. SYST21-LK24

SYCST21-LK37F 1 x LK 37-pole female, 3 push-on blade con. 14-pole incl. SYST21-LK37

SYCST21-LK37M 1 x LK 37-pole male, 3 push-on blade con. 14-pole incl. SYST21-LK37

FOR SIDE CONNECTIONS:

NEW!


1

2

3

5

4

7

6


MOD

ULAR

SYS

TEM

SMODULAR SYSTEMS

SYSBOXX MKII CONNECTION MODULES

SYSBOXX MKII CONNECTOR MODULE with push-on connection – suitable for SYFB front panel (width unit WU = 35.6 mm 7 TE)


matching SYFB front panel (order separately)

SBC13-XA3FA A series XLR 3-pole 4 x Neutrik female p 12 lift terminals + 14-pole blade terminal

SYFB23-8A

SBC13-XA3FL A series XLR 3-pole 4 x Neutrik female p 12 LSA SYFB23-8A

SBC13-XA3MA A series XLR 3-pole 4 x Neutrik male p 12 lift terminals + 14-pole blade terminal

SYFB23-8A

SBC13-XA3ML A series XLR 3-pole 4 x Neutrik male p 12 LSA SYFB23-8A

1 SBC13-XB3FA B series XLR 3-pole 4 x Neutrik female p 12 lift terminals + 14-pole blade terminal

SYFB23-8A

SBC13-XB3FL B series XLR 3-pole 4 x Neutrik female p 12 LSA SYFB23-8A2 SBC13-XB3MA B series XLR 3-pole 4 x Neutrik male p 12 lift

terminals + 14-pole blade terminalSYFB23-8A

SBC13-XB3ML B series XLR 3-pole 4 x Neutrik male p 12 LSA SYFB23-8A

3 SBC13-XB5FA B series XLR 5-pole 4 x Neutrik female p 12 lift terminals + 14-pole blade terminal

SYFB23-8A

SBC13-XB5FL B series XLR 5-pole 4 x Neutrik female p 12 LSA SYFB23-8A


SYFB23-8A

SBC13-XB5ML B series XLR 5-pole 4 x Neutrik male p 12 LSA SYFB23-8A

4 SBC13-CDW Combo series 4 x Neutrik female p 14-pole blade terminal*

SYFB23-8D

5 SBC13-EBL EtherCon 4 x Neutrik female p 32 LSA SYFB23-8ASBC13-MF Female connecting strip 30-pole gold-plated contacts

p 2 x 14-pole + 1 x 10-pole blade terminalSYFB23-2SIEM30

SBC13-MM Male connecting strip 30-pole gold-plated contacts p 2 x 14-pole + 1 x 10-pole blade terminal

SYFB23-2SIEM30

6 SBC21-N 2 x NL4MDV1 p 6.3 mm push-on blade connectors SYFB21-2D

SBC21-D25F SUB-D 25-pole p 2 x blade terminal 14-pole, TASCAM allocation

SYFB21-SUB25

SBC23-XA3MFA A series XLR 3-pole 4 x Neutrik male + female p 12 lift terminals + 14-pole blade terminal

SYFB23-8A

7 SBC23-XB3MFA B series XLR 3-pole 4 x Neutrik male + female p 12 lift terminals + 14-pole blade terminal

SYFB23-8A

SBC-4BREAK 12 x lift terminals p 14-pole blade terminal

SBC-4BREAK-LSA 12 LSA p14-pole blade terminal for solid wire

S-P3,0X08A-TS Screw set A series/EtherCon, Combo 25 x M2.5 x 10 counter screws Torx 8 f. modules – per item.

S-G2,5X08S-TS Screw set B series, 25 x M2.5 x 10 counter screws Torx 8 f. modules – per item.

SYPS-03-MK2 Labelling profile 3 BE (¼ x 19”) NSSB-01-48 Labelling strips channel 1 – 48

* suitable countersunk screw: S-P3.0x08A-TS

SYSBOXX MKII Ground lift moduleGround lift module with 4 premounted ground lift switches on printed sheet metal module for cutting into ribbon cable system. Installation behind the front plate SYFB23-8A or SYFB23-8D.

ORDER NO. DESCRIPTION SBC13-4GND-LIFT SYSBOXX module 1 HU, 3 WU, 4 x GND LIFT


NEW!

NEW!


MOD

ULAR

SYS

TEM

S

MODULAR SYSTEMS

SYSBOXX SCREW SETS – for connector (module) fixing to front and side panels ORDER NO. DESCRIPTION SUITABLE FOR VPE S-G2,5x08C-TS M2.5 x 8 countersunk screw, B series 25 pcs. self-tapping, Torx 8 S-P3,0x08A-TS 3 x 8 countersunk screw with A series, NE8FA, 25 pcs. compact head, Torx 10 NLD4MDV1 for sunk installation in 2.5 hollowS-P3,0x08C-TS 3 x 8 PT screw, Torx 10 Speakon 25 pcs. S-M3,0x12S-TS M3 x 12 countersunk screws, Torx 10 D- series 25 pcs.

S-T3,0x00I-AB Locking nuts D series 25 pcs.

S-M4,0X10D-TS M4 x 10 screw, Torx 20 MP Multipin 25 pcs. S-M4,0X16S-TS M4 x 16 countersunk screw, Torx 20 LK Multipin, Schuko 25 pcs. S-M2,5X10S-TS Countersunk screws M2.5 x 10, Torx 8 Front panel SYFB 50 pcs.

S-G4,0x10C-TS Lens head screw self tapping Side panel SYST 25 pcs. M4 x 10, Torx 20 (4 pcs. per HE)

SYSBOXX TORX SETS – for all SYSBOXX screws ORDER NO. DESCRIPTION TORX-SET-SBB Torx set bit: 6, 8, 10 ,20 TORX-SET-SBS Torx set box spanner: 6, 8, 10, 20

SYSBOXX MKII ACCESSORIES

SYSBOXX RIBBON CABLE for SBC connector modules (except for load connections) ORDER NO. RIBBON CABLE WITH LENGTH SBC-C2-0020 2 x 14-pole blade terminal socket with lock 0.20 m SBC-C2-0040 2 x 14-pole blade terminal socket with lock 0.40 m SBC-C2-0060 2 x 14-pole blade terminal socket with lock 0.60 m SBC-F2-0030 1 x 14-pole blade terminal socket with lock p CDFA 0.30 m SBC-F2-0040 1 x 14-pole blade terminal socket with lock p CDFA 0.40 m SBC-M2-0030 1 x 14-pole blade terminal socket with lock p CDMA 0.30 m SBC-M2-0040 1 x 14-pole blade terminal socket with lock p CDMA 0.40 m 388-1406 Ribbon cable bulkware 14 x AWG28 1.00 m 1.00 mSB-FS14 Row connectors 14-pole with lock – Other lengths and other connector configurations on request.

SYSBOXX PAINT STICK RAL 7010 for touching up scratches and “usage marks“. ORDER NO. SYS-PAINTSTICK


IBC-4XM IBC-8XF IBC-4XF1:1S

BXPU-Z16/04


MOD

ULAR

SYS

TEM

SMODULAR SYSTEMS

You can connect up our INSTA-BOXX right on location – without a soldering gun! A triple plug-spring clip is available for each XLR-audio channel on the back (ground, minus, plus) to allow connection of a separate ground, either a drain wire or a solid wire measuring 0.05 – 2.5 mm². You only need a small screwdriver for insertion!(For central grounding simply bridge the respective ground connections for all channels e.g. with a wire on the plug terminals – or on the two soldering point for each channel on the board).The connection board has three soldering points per channel for additional connection of a multipin connnector.

The secret for a superfast and permanent installation solution are our special XLR-module boards with 4 or 8 channel spacing in connection with

the SOMMER CABLE casing series BLACKBOXX, PLUG MAMA and THE BOXX MK III.You can order them as a kit or preassembled and prewired, even on one or two rectangular multipins – optionally also with 1:1 transmitter technology (BLACKBOXX and THE BOXX only). The empty casings for the BLACKBOXX, PLUG MAMA and THE BOXX MK III are available in Chapter “MECHANICS & ACCESSORIES“.

For installation of > 24 channels we recommend our BLACKBOXX-casing series – see photograph and for smaller systems THE BOXX MKIII. Four holes are provided on the bottom of the BLACKBOXX and the removable 19“ side profiles to allow simple floor and wall installation.

XLR-module boards (casings are available under “MECHANICS & ACCESSORIES“)

ORDER NO. DESCRIPTIONIBC-4XF Plug connector module clamping connection 4xXLR f

IBC-4XF1:1S Plug connector module clamping connect. 4xXLR f with 1:1 transmitter

IBC-4XM Plug connector module clamping connection 4xXLR m

IBC-8XF Plug connector module clamping connection 8xXLR f

IBC-8XM Plug connector module clamping connection 8xXLR m

1 – 2 – 3 – finished !

BXPU-Z16/04 preassembled + prewired

Simply connect the cable on location

INSTA-BOXX

THE BOXX – loaded + prewired, without multipinAssignment ORDER NO.08/00, without multipin XXPY-M08/0008/04, without multipin XXPY-M08/0412/04, without multipin XXPY-M12/0416/04, without multipin XXPY-M16/0420/04, without multipin XXPY-M20/0424/08, without multipin XXPY-M24/08

BLACKBOXX – loaded + prewired, without multipinAssignment ORDER NO.16/04, without multipin BXPY-M16/0420/04, without multipin BXPY-M20/0424/04, without multipin BXPY-M24/0832/08, without multipin BXPY-M32/0840/08, without multipin BXPY-M40/08

BLACKBOXX – 1:1 transmitter technology Assignment ORDER NO. 16/04, without multipin BXPW-M16/0420/04, without multipin BXPW-M20/0424/04, without multipin BXPW-M24/0432/04, without multipin BXPW-M32/0440/04, without multipin BXPW-M40/04Configurations incl. multipin upon request.

BLACKBOXX – rectangular multipin, separate groundingAssignment ORDER NO. 16/04, MP72 BXPX-M16/0420/04, MP72 BXPX-M20/0424/08, MP108 BXPZ-M24/0816/04, 2 x MP72 BXPU-M16/0420/04, 2 x MP72 BXPU-M20/0424/08, 2 x MP108 BXPV-M24/08

BLACKBOXX – rectangular multipin, central groundingAssignment ORDER NO. 16/04, MP72 BXPX-Z16/04 20/04, MP72 BXPX-Z20/0424/08, MP108 BXPZ-Z24/0832/08, MP108 BXPZ-Z32/0840/08, MP108 BXPZ-Z40/0816/04, 2 x MP72 BXPU-Z16/0420/04, 2 x MP72 BXPU-Z20/0424/08, 2 x MP108 BXPV-Z24/0832/08, 2 x MP108 BXPV-Z32/0840/08, 2 x MP108 BXPV-Z40/08

BXPU-Z16/04

1 – 2 – 3 – finished !

BXPU-Z16/04 preassembled + prewiredpreassembled + prewiredBXPU-Z16/04 preassembled + prewired

Simply connect Simply connect the cable on locationthe cable on location


NEW!

MOD

ULAR

SYS

TEM

S

MODULAR SYSTEMS

SYSWALL 50 x 50 mmmade of 4 mm solid, glass bead-blasted stainless steel for the highest demands

SYSWALL 45 x 45 mm

timesaving, low-priced clip-in module technology in plastic, pure white and silver plastic for

multiple applications

SYSWALL 55 x 55 mm

practical clip-in system in plastic, pure white and anthracite plastic for combinations with

standard, German standard switch ranges

The SYSWALL systems give you all desired configurations and you are prepared for future amendments, upgrades and changes in line with the latest industry standards. The combination of these benefits creates a previously unachieved flexibility with the integration of media connections in a switch frame. The 4-way button modules are ideal for integration into SYSWALL and SYSBOXX components.The white, custom-labelled buttons with equally white LED lighting offer completely new possibilities for the integration into desk tanks or SYSBOXX units. Since there are different versions available, connectivity to all building and media control systems is a given.

An ideal timesaving feature for planners is the tender specification generator at www.sysboxx.com.

Another SYS in the WALL...After the sweeping success of our SYSWALL range, we are going one better with the introduction of the new SYSWALL system available now in 3 sizes.Not only have we adjusted the central plates to the requirements of the installation and property sector, but we have also created a whole range of new features for planners and installation technicians.

All ready-to-connect media modules are now available in two different versions:1.) with mini breakout cable for space-saving integration in dado trunkings, cavity walls etc. The breakout cable (in 0.15 m and 0.20 m lengths) is super compact and ideally suitable for often very tight sockets and mounting boxes.2.) with lift terminal technology for easy fitting of cable ends. All you need is a small screwdriver. The installation depth is only approx. 30 mm – even with the complex HDMI/DVI/VGA connections.

Moreover, we have considerably extended the range of available clip-in modules (Keystone).


NEW!


MOD

ULAR

SYS

TEM

SMODULAR SYSTEMS

SYSWALL 50

The 50 x 50 mm central plate made of 4 mm solid stainless steel with glass bead-blasted surface provides an outstanding look for your prestigious projects, e.g. in boardrooms or in the medical sector.A SOMMER CABLE novelty: 4-way button modules for integration into SYSWALL and SYSBOXX components.The white, custom-labelled buttons with equally white LED lighting offer completely new possibilities for the integration into desk tanks or SYSBOXX units. Since there are different versions available, connectivity to all building and media control systems is a given.The 50 mm front dimension ensures complete compatibility with all standard switch frames.

The front plates are secured by 2 screws on the stainless steel installation frame which provides great stability and easy installation. The SYSDESK 50-4 also gives you a solid stainless steel fitting solution for property in the SYSDESK 09 housing size (table cutout dimensions: 344 x 170 mm).In addition we offer you the optional service of an individual and high-quality laser marking.

PRODUCT BENEFITS:• broad range of modules • attractive look• high standard of cleanliness/sterility • ultra solid• high packing density• individual laser marking• integrated touch sensors (EIB/KNX, RS232, IP, EnOcean®,...) also available APPLICATIONS:• Installation in upmarket property and medical environments

ORDER NO.SYSWALL50-Frames and accessories, stainless steel glass pearl-blasted

28 W-MR-1 Single installation frame, 72 x 72 mm for W50 and W55*

29 W-MR-2 Double installation frame, 72 x144 mm for 2 x W 50 or W55*

30 W50M-AR Adapter frame SYSWALL50 —> Blind frame stainless steel

31 W50M-SR-1 Blind frame, 1-way 32 W50M-SR-2 Blind frame, 2-way

W50M-SR-3 Blind frame, 3-way

W50M-SR-4 Blind frame 4-way

W50M-SR-5 Blind frame, 5-way 33 W50M-SK-1 Schuko socket for W50M-SR34 W50M-SK-2 Button toggle switch, 1 rocker for

W50M-SR35 W50M-SK-3 Button series switch, double rocker for

W50M-SR36 SYSDESK50-4 Desk tank stainless steel brushed

(SYSDESK09-HQ) incl. 2 Schukos with adapter for 4 x SYSWALL50 modules, W x L x D: 193 x 352 x 170 mm

W-Laser Individual laser marking, per module/article

* absolutely essential for the installation of SYSWALL50 front plates

ORDER NO.SYSWALL50-MEDIA MODULES 50 x 50 mm, stainless steel glass bead-blasted

1 W50M-FP-2KST unloaded, with 2 x sunken Keystone cutouts(clip modules see next pages)

2 W50M-FP-2KST-VGA unloaded, VGA with 2 x sunken Keystone cutouts(clip modules see next pages)

3 W50M-FP-D unloaded, with 1 x D-hole, suitable for all D-insert connectors

4 W50M-AP-DIP 4-way button modulel, with LED lighting (variable LED input voltage adjustable via DIP jumper adjustable 5, 12, 24 & 48 V) freefloating switch contacts and 4-pole plug-in terminal per button

4 W50M-AP-EIB 4-way button module, EIB/KNX with LED lighting, incl. ETS application, buttons & LED‘s freely allocatable via software, cabling via EIB/KNX bus terminals

4 W50M-AP-ENO 4-way button module, simple integration into EnOcean® radio networks (CR2032 battery enables up to 10,000 switching cycles)

4 W50M-AP-IP 4-way button module, IP, integratable into LAN network, local power supply or via PoE, the Web interface enables easy and intuitive operation. Several modules can be connected with each other

4 W50M-AP-RS232 4-way button module, RS232 with LED lighting (module freely addressable via DIP switches, up to 16 modules cascadable —> max. 64 switching ducts), cabling via CAT.5/6 patch cables

5 W50M-CP-1XF-S XLR fem. —> Screw terminal6 W50M-CP-1XJ-S XLR/RCA-combo fem. —> Screw terminal7 W50M-CP-1XM-S XLR male —> Screw terminal8 W50M-CP-2XF-S 2 x XLR fem. —> Screw terminal9 W50M-CP-2XJ-S 2 x XLR/RCA-combo fem. —> Screw terminal

10 W50M-CP-2XM-S 2 x XLR male —> Screw terminal11 W50M-CP-C2A-C 2 x RCA Audio red/white fem. —> 0.30 m

breakout cable 2 x RCA audio red/white fem.

12 W50M-CP-C2A-S 2 x RCA Audio red/white fem. —> Screw terminal13 W50M-CP-C3A-C 3 x RCA A/V yellow/red/white fem. —> 0.30 m

Breakout cable 3 x RCA A/V yellow/red/white fem.

14 W50M-CP-C3A-S 3 x RCA A/V yellow/red/white fem. —> Screw terminal

15 W50M-CP-C3Y-C 3 x RCA YUV red/green/blue fem. —> 0.30 m Breakout cable 3 x RCA YUV red/green/blue fem.

16 W50M-CP-C3Y-S 3 x RCA YUV red/green/blue fem. —> Screw terminal

17 W50M-CP-DVI-C1 DVI fem. —> 0.15 m breakout cable DVI fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 2 x RCA/RCA fem.

ORDER NO.SYSWALL50-MEDIA MODULES 50 x 50 mm, stainless steel glass bead-blasted

18 W50M-CP-DVI-C3 DVI fem. —> 0.15 m breakout cable DVI fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 3.5 mm stereo mini jack fem.

19 W50M-CP-DVI-S DVI fem. + 3.5 mm stereo mini jack fem. —> Screw terminal

20 W50M-CP-HD-C HDMI fem. —> 0.15 m breakout cable HDMI fem.21 W50M-CP-HD-S HDMI fem. —> Screw terminal22 W50M-CP-USB-S USB-A fem. —> Screw terminal23 W50M-CP-VGA-C1VGA fem. —> 0.15 m breakout cable VGA

fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 2 x RCA/RCA fem.

24 W50M-CP-VGA-C2VGA fem. —> 0.2 m breakout cable 5 x BNC fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 2 x RCA/RCA fem.

25 W50M-CP-VGA-C3VGA fem. —> 0.2 m breakout cable VGA fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 3.5 mm stereo mini jack fem.

26 W50M-CP-VGA-C4VGA fem. —> 0.2 m breakout cable 5 x BNC fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 3.5 mm stereo mini jack fem.

27 W50M-CP-VGA-S VGA fem. + 3.5 mm stereo mini jack fem. —> Screw terminal, 3 + 15-pole fully wired

ATTENTION! W-MR mounting frame required for front plate installation

www.sommercable.com · [email protected] · [email protected]

complete compatibility with all standard PRODUCT BENEFITS:PRODUCT BENEFITS:• broad range of modules • attractive look• attractive look• high standard of cleanliness/sterility • high standard of cleanliness/sterility • ultra solid• ultra solid• high packing density• high packing density


1

28 29 30 31 32

33 34 35 36

64 52 3 7

8 9 10 11 12 13

14 15 16 17 18

19 20 21 22 23

24 25 26 27

17

20 23


MOD

ULAR

SYS

TEM

S

MODULAR SYSTEMS


NEW!NEW!


MOD

ULAR

SYS

TEM

SMODULAR SYSTEMS

PRODUCT BENEFITS:• simple clip installation without screws• fits every standard 45 mm channel system• broad range of modules• individual laser marking• integrated touch sensors (EIB/KNX, RS232, IP, EnOcean®,...) also available APPLICATIONS:• Mounting in installation ducts, underfloor systems and media columns

SYSWALL 45

With the introduction of the micro channel system for 45 mm clip modules in France and Belgium the foundation was laid for pioneering and well-structured dado trunking and media channel systems. This new system is now continuing its triumph all over Europe. The reasons are obvious:

• ultra compact and visually attractive channel system with a broad module range

• useable as dado trunking, classic flush-mounted, floor installation system and media column

• time-saving clip system: channel installation does not require frames, sockets or the like.

Here at SOMMER CABLE we are building on this success with the SYSWALL45range to provide a large range of media installation units in the 45 mm clip module size. This includes media connections, touch sensor buttons (EIB/KNX, IP, RS232, EnOcean®,...) up to media control components.The 4-way button modules are ideally suitable for integration into SYSWALL and SYSBOXX components.The white, custom-labelled buttons with equally white LED lighting offer completely new possibilities for the integration into desk tanks or SYSBOXX units. Since there are different versions available, connectivity to all building and media control systems is a given.

In addition to the pure modules, we also supply dado trunking and room column systems from the German manufacturer GGK. All modules are available as standard in pure white and aluminium-silver lacquer finish. We will be happy to discuss individual colour requirements for your project. Please contact us.

COLO

UR

ORDER NO.

SYSWALL45-Media modules 45 x 45 mm, clip-in (Colours: pure white RAL 9010 or aluminium-silver RAL 9006)

W45KWFP-0 Blind plate half, 22.5 x 45 mm, pure white1 W45KSFP-0 Blind plate half, 22.5 x 45 mm, alu.-silver

W45KWFP-1 Blind plate 45 x 45 mm, pure white2 W45KSFP-1 Blind plate 45 x 45 mm, aluminium-silver3 W45KWFP-2KST

W45KSFP-2KSTunloaded, with 2 x sunken Keystone cutouts, matching clip modules – see next pages

4 W45KWFP-D W45KSFP-D

unloaded, with 1 x D-hole, suitable for all D-insert connectors

5 W45KWAP-DIP W45KSAP-DIP

4-way button module, with LED lighting (variable LED input voltage via DIP jumper adjustable 5, 12, 24 & 48 V) floating switch contacts and 4-pole push terminal per button

5 W45KWAP-EIB W45KSAP-EIB

4-way button module, EIB/KNX with LED lighting, incl. ETS application, buttons & LED‘s freely allocatable via software, cabling via EIB/KNX bus terminals

5 W45KWAP-ENO W45KSAP-ENO

4-way button module, simple integration in EnOcean® radio networks (CR2032 battery enables up to 10,000 switching cycles)

5 W45KWAP-IP W45KSAP-IP

4-way button module, IP, integratable in LAN network, local power supply or via PoE, the Web interface enables easy and intuitive operation. Several modules can be connected with each other

5 W45KWAP-RS232 W45KSAP-RS232

4-way button module, RS232 with LED lighting (module freely addressable via DIP switches, up to 16 modules cascadable —> max. 64 switching ducts), cabling via CAT.5/6 patch cables

6 W45KWCP-1XF-S W45KSCP-1XF-S

XLR fem. —> Screw terminal

7 W45KWCP-1XJ-S W45KSCP-1XJ-S

XLR/RCA-combo fem. —> Screw terminal

8 W45KWCP-1XM-S W45KSCP-1XM-S

XLR male —> Screw terminal

9 W45KWCP-C2A-C W45KSCP-C2A-C

2 x RCA audio red/white fem. —> 0.30 m breakout cable 2 x RCA audio red/white fem.

10 W45KWCP-C2A-S W45KSCP-C2A-S

2 x RCA audio red/white fem. —> Screw terminal

COLO

UR

ORDER NO.

SYSWALL45-Media modules 45 x 45 mm, clip-in (Colours: pure white RAL 9010 or aluminium-silver RAL 9006)

11 W45KWCP-C3A-C W45KSCP-C3A-C

3 x RCA A/V yellow/red/white fem. —> 0.30 mBreakout cable 3 x RCA A/V yellow/red/white fem.

12 W45KWCP-C3A-S W45KSCP-C3A-S

3 x RCA A/V yellow/red/white fem. —> Screw terminal

13 W45KWCP-C3Y-C W45KSCP-C3Y-C

3 x RCA YUV red/green/blue fem. —> 0.30 m breakout cable 3 x RCA YUV red/green/blue fem.

14 W45KWCP-C3Y-S W45KSCP-C3Y-S

3 x RCA YUV red/green/blue fem. —> Screw terminal

15 W45KWCP-DVI-C1 W45KSCP-DVI-C1

DVI fem. —> 0.15 m breakout cable DVI fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 2 x RCA/RCA fem.

16 W45KWCP-DVI-C3 W45KSCP-DVI-C3

DVI fem. —> 0.15 m breakout cable DVI fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 3.5 mm stereo mini jack fem.

17 W45KWCP-DVI-S W45KSCP-DVI-S

DVI fem. + 3.5 mm stereo mini jack fem. —> Screw terminal

18 W45KWCP-HD-C W45KSCP-HD-C

HDMI fem. —> 0.15 m breakout cable HDMI fem.

19 W45KWCP-HD-S W45KSCP-HD-S

HDMI fem. —> Screw terminal

20 W45KWCP-SV-S W45KSCP-SV-S

S-video + 2 RCA audio red/white fem. —> Screw terminal

21 W45KWCP-USB-S W45KSCP-USB-S

USB-A fem. —> Screw terminal

22 W45KWCP-VGA-C1 W45KSCP-VGA-C1

VGA fem. —> 0.15 m breakout cable VGA fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 2 x RCA/RCA fem.


VGA fem. —> 0.2 m breakout cable 5 x BNC fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 2 x RCA/RCA fem.


VGA fem. —> 0.2 m breakout cable VGA fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 3.5 mm stereo mini jack fem.


VGA fem. —> 0.2 m breakout cable 5 x BNC fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 3.5 mm stereo mini jack fem.

26 W45KWCP-VGA-S W45KSCP-VGA-S

VGA fem. + 3.5 mm stereo mini jack fem. —> Screw terminal, 3 + 15-pole fully wired


1 2 3 4 5 7 86

9 10 11 12 13

15

14

16 17 18

20 222119 2322

24 25 26


MOD

ULAR

SYS

TEM

S

MODULAR SYSTEMS


1 2 3

5 6 74

NEW!


MOD

ULAR

SYS

TEM

SMODULAR SYSTEMS

SYSWALL 45 channel systems and accessories

For the installation of the 45 mm clip module system we supply dado trunkings, flush-mounted installation frames, room and table base columns, as well as desktop construction systems (multimedia panel).

COLO

UR

ORDER NO.

SYSWALL45 switches , frames, duct systems, accessories(Colours: pure white RAL 9010 or aluminum-silver RAL 9006)

14 W45C-AR2-0300 SYSWALL45 Aluminum room column round D=100 mm, 1-way, 3,000 mm, w/o W45C-AST

15 W45C-AR2-KAS End cap for wall, floor and ceiling connection of the aluminum micro room column, round, painted

W45C-AR2-MON Installation unit for ceiling/floor installation of aluminum room column, round

16 W45C-AS1-0200 SYSWALL45 aluminum duct, single, 60 x 90/45 mm, anodised aluminum, 2,000 mm, w/o W45C-AST

W45C-AS2-0200 SYSWALL45 aluminum duct, double, 65 x 130/45 mm, anodised aluminum, 2,000 mm, w/o W45C-AST

17 W45C-AST-0200 SYSWALL45 aluminum clip cover for 45er aluminum ducts and columns, 2,000 mm (W45C-AR1/2 and -AS1/2)

18 W45C-ASD-0065 SYSWALL45 Alu-Multimedia-Panel, 65 x 185/45 mm, 2-way, anodised aluminum, 650 mm, incl. 2 x W45C-AST

W45C-ASD-0100 SYSWALL45 aluminum multimedia panel, 65 x 185/45, 2-way, anodised aluminum, 1,000 mm, incl. 2 x W45C-AST

W45C-ASD-0200 SYSWALL45 aluminum multimedia panel, 65 x 185/45 mm, 2-way, anodised aluminum, 2,000 mm, incl. 2 x W45C-AST

19 W45C-ASD-END End cap right and left for aluminum multimedia panel incl. screws

W45C-ASD-FUSS Foot set for multimedia panel (20 pcs.)20 W45C-KW1-0200 SYSWALL45 plastic duct, 1-way,

64 x 100/45 mm, pure white, 2 m

W45C-KW1-AE External corner incl. joint with ±10° adjustability for plastic duct KW1 pure white

W45C-KW1-IE Internal corner incl. joint with ±10° adjustability for plastic duct KW1 pure white

W45C-KW1-END End cap for plastic duct KW1, pure white21 W45C-KW2-0200 SYSWALL45 plastic duct, 2-way,

64 x 130/45 mm, pure white, 2,000 mm

W45C-KW2-AE External corner incl. joint with ±10° adjustability for plastic duct KW2 pure white

W45C-KW2-IE Internal corner external corner incl. joint with ±10° adjustability for plastic duct KW2 pure white

W45C-KW2-END End cap for plastic duct KW2, pure white22 W-CUT Manual mitre-saw saw for metal and plastic

for cutting profiles to correct length on site

W45-AP-1 Surface-mounted housing, 1-way, 80 x 80 x 42 mm (W x H x D) incl. switch frame, pure white

23 W45-AP-2 Surface-mounted housing, 2-way, 149 x 80 x 42 mm (W x H x D), incl. switch frame, pure white

24 W45-AP-3 Surface-mounted housing, 3-way, 195 x 80 x 42 mm (W x H x D), incl. switch frame, pur white

25 W45C-AS3-019 SYSWALL45 Aluminum housing, W x H x D 190 x 57 x 60 mm for 4 x 45 modules, incl. end caps and 2 installation brackets

26 W45C-AS3-033 SYSWALL45 Aluminum housing, W x H x D 325 x 57 x 60 mm for 7 x 45 modules, incl. end caps and 2 installation brackets

W-LASER Individual laser marking, per module/article

COLO

UR

ORDER NO.

SYSWALL45 switches , frames, duct systems, accessories(Colours: pure white RAL 9010 or aluminum-silver RAL 9006)

W45KW-SK-1 Schuko socket, clip-in pure white1 W45KS-SK-1 Schuko socket, clip-in, silver

W45KW-SK-1B CEE7/5 socket, version for France/Belgium, clip-in, pure white

2 W45KS-SK-1B CEE7/5 socket, version for France/Belgium, clip-in, silver

W45KW-SK-1C Swiss socket version, clip-in, pure white3 W45KW-SK-2 Button-toggle switch, 1 rocker, clip-in, pure white

W45KS-SK-2 Button-toggle switch, 1 rocker, clip-in, silver4 W45KW-SK-2B Button-toggle switch, 1 rocker, custom-labelled,

clip-in, pure white

W45KS-SK-2B Button-toggle switch, 1 rocker, custom-labelled, clip-in, silver

5 W45KW-SK-3 Button serial switch, double rocker, clip-in, pure white

W45KS-SK-3 Button serial switch, double rocker, clip-in, silver6 W45KW-SK-4 Button-toggle switch, clip-in, pure white

W45KS-SK-4 Button-toggle switch, clip-in, silver7 W45KW-SK-4B Button serial switch, double rocker,

custom-labelled, clip-in, pure white

W45KS-SK-4B Button serial switch, double rocker,custom-labelled, clip-in, silver

8 W45-MR-1 Flush-mounted installation frame, single, 74 x 74 mm for W45 —> blind frame

9 W45KW-SR-1 Blind frame, 1-way, external 80 x 80 mm, pure white

9 W45KS-SR-1 Blind frame, 1-way, external 80 x 80 mm, silver





12 W45C-AR1-0300 SYSWALL45 Aluminum micro room column 62 x 62/45 mm, 1-way, 3,000 mm, without W45C-AST

13 W45C-AR1-KAS End cap for wall, floor and ceiling connection of the aluminum micro room column, painted

W45C-AR1-MON Installation unit for ceiling/floor installation of aluminum micro room column

To save you from needlessly rummaging the market, we have put together the suitable switches/buttons, switch frames and sockets in pure white and aluminium silver for you.To complete a perfectly designed system, you can have every module, every switch or switch frame individually laser marked by us.


12

13

16

19

17

21

22

23

24

25 26

14

15

8 9 10 11

20

25 26

19

18


MOD

ULAR

SYS

TEM

S

MODULAR SYSTEMS

Clipcontrol – The practical media control

With the compact size of three 45 mm modules (130 x 45 mm), integration isachieved fast and easily – without programming knowledge.Configuration is done without any additional software via a web interface (just like with an internet router), which is displayed in every standard web browser. Here various output functions or macros can be assigned to the different buttons, such as the sending of an RS232 command, the switching of a relay or the despatch of TCP/IP data packets within the network. The control has 1 bidirectional and 3 unidirectional RS232 interfaces, 1 networkconnection, 1 extension port and 8 key inputs with LED feedback via RJ12 (pot. 5 V,20 mA). This can cover the requirements for a small meeting room: the control of a beamer or screen, source selection and volume control. The additional benefit of the network connection is the remote maintenance and control diagnosis. With the remote control an employee can prepare for meetings the conference room for his meeting while sitting at his desk – or the technical staff can be informed in good time of problems with the beamer lamp.

Clipcontrol also relies on a very simple installation and operating concept. The key inputs are connected via RJ12 cables. Hence the installation can be completed in less than an hour! Each source connection is allocated a button to carry out the necessary actions required for the presentation - without navigating through complex menus. The 12 VDC power supply is provided via a push-in terminal.

ORDER NO.W45X3KW-CON


A B

NEW!


MOD

ULAR

SYS

TEM

SMODULAR SYSTEMS

PRODUCT BENEFITS:• easy clip installation without screws• suitable for all standard 55 mm ducts and switching

systems (fig. A + B)• broad range of modules• individual laser marking• integrated touch sensors (EIB/KNX, RS232, IP,

EnOcean®,...) also available APPLICATIONS:• Installation in design switch frames and in high-class

private or business environments

SYSWALL 55

The 55 x 55 mm Syswall series can be combined very easily with almost all standard German switch frame series such as the Gira-Glas and Terracotta series (fig. A, fig. B) combined. The simple clip installation system provides previously unknown visual benefits since there are no visible screws to hold the central plate in place. The combination with glass or design series will offer you special, individual opportunities for high-class private or business environments.The series is available in RAL 9010 (pure white) and RAL 7016 (anthracite). Other colours (including paint versions) are available on request.

COLO

UR

ORDER NO.SYSWALL55 Frames and accessories (Colour: pure white RAL 9010)

21 W-MR-1 Installation frame, 1-way, 72 x 72 mm for W55 and W50*

22 W-MR-2 Installation frame, 1-way, 72 x 72 mm for W55 and W50*

23 W55KW-SR-1 Blind frame, 1-way24 W55KW-SR-2 Blind frame, 2-way

W55KW-SR-3 Blind frame, 3-wayW55KW-SR-4 Blind frame, 4-wayW55KW-SR-5 Blind frame, 5-way

25 W55KW-SB-1 Blind frame, custom labelled, 1-way26 W55KW-SB-2 Blind frame, custom labelled, 2-way

W55KW-SB-3 Blind frame, custom labelled, 3-wayW55KW-SB-4 Blind frame, custom labelled, 4-wayW55KW-SB-5 Blind frame, custom labelled, 5-way

27 W-AP-1 Surface-mounted, 1-way, incl. switch frame

28 W-AP-2 Surface-mounted, 2-way, incl. switch frame

W-AP-3 Surface-mounted, 3-way, incl. switch frame

29 W55KW-SK-1 Schuko Socket30 W55KW-SK-2 Button-toggle switch, 1 rocker 31 W55KW-SK-3 Button series switch, double rocker

W-Laser Individual laser marking, per module/article

* absolutely essential for the installation of SYSWALL55 or 50 front plates

COLO

UR

ORDER NO.

SYSWALL55 Media modules 55 x 55 mm(Colours: pure white RAL 9010 or anthracite RAL 7016)

1 W55KWFP-2KST W55KAFP-2KST

unloaded, with 2 x sunken Keystone cutouts, matching clip modules – see next pages

2 W55KWFP-D W55KAFP-D

unloaded, with 1 x D-hole, suitable for all D-insert connectors

3 W55KWCP-1XF-S W55KACP-1XF-S

XLR fem. —> Screw terminal

4 W55KWCP-1XJ-S W55KACP-1XJ-S

Screw terminal. —> Screw terminal

5 W55KWCP-1XM-S W55KACP-1XM-S

XLR male —> Screw terminal

6 W55KWCP-C2A-S W55KACP-C2A-S

2 x RCA audio red/white fem. —> Screw terminal

7 W55KWCP-C3A-S W55KACP-C3A-S

3 x RCA A/V yellow/red/white fem. —> Screw terminal

8 W55KWCP-C3Y-S W55KACP-C3Y-S

3 x RCA YUV red/green/blue fem. —> Screw terminal

9 W55KWCP-DVI-C1 W55KACP-DVI-C1

DVI fem. —> 0.15 m breakout cable DVI fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 2 x RCA/RCA fem.

10 W55KWCP-DVI-C3 W55KACP-DVI-C3

DVI fem. —> 0.15 m breakout cable DVI fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 3.5 mm stereo mini jack fem.

11 W55KWCP-DVI-S W55KACP-DVI-S

DVI fem. + 3.5 mm stereo mini jack fem. —> Screw terminal

12 W55KWCP-HD-C W55KACP-HD-C

HDMI fem. —> 0.15 m breakout cable HDMI fem.

13 W55KWCP-HD-S W55KACP-HD-S

HDMI fem. —> Screw terminal

14 W55KWCP-SV-S W55KACP-SV-S

S-video + 2 RCA audio red/white fem. —> Screw terminal

15 W55KWCP-USB-S W55KACP-USB-S

USB-A fem. —> Screw terminal

16 W55KWCP-VGA-C1 W55KACP-VGA-C1

VGA fem. —> 0.15 m breakout cable VGA fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 2 x RCA/RCA fem.


VGA fem. —> 0.2 m breakout cable 5 x BNC fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 2 x RCA/RCA fem.


VGA fem. —> 0.2 m breakout cable VGA fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 3.5 mm stereo mini jack fem.

COLO

UR

ORDER NO.

SYSWALL55 Media modules 55 x 55 mm(Colours: pure white RAL 9010 or anthracite RAL 7016)


VGA fem. —> 0.2 m breakout cable 5 x BNC fem. + 3.5 mm stereo mini jack fem. —> 0.15 m breakout cable 3.5 mm stereo mini jack fem.

20 W55KWCP-VGA-S W55KACP-VGA-S

VGA fem. + 3.5 mm stereo mini jack fem. —> Screw terminal, 3 + 15-pole fully wired

ATTENTION! W-MR mounting frame required for front plate installation


1 2 3 4

14 15 16 17 18

21 2219 20

23 24 25 26

27 28 29 30 31

5 6 7 8

9 10 11 12 13


MOD

ULAR

SYS

TEM

S

MODULAR SYSTEMS


5

11 2 3 4

6 7 8 9 10 11 12

13 14 15 16 17 18 19

20 21 22 23 24 25 26 27

28 29 30 31 32 33 34 35 36

NEW!

NEW! NEW! NEW! NEW!

NEW! NEW!

NEW! NEW!

NEW! NEW! NEW! NEW! NEW! NEW!

NEW!


MOD

ULAR

SYS

TEM

SMODULAR SYSTEMS

Connectors Digital KEYSTONE PANEL CLIP CONNECTORS

The CLIP principle!The super compact clip panel connectors in the Keystone format are suitable e.g. for special 19“ panels, wall sockets and also for all SYStems such as SYSBOXX, SYSDESK, SYSWALL, SYSFLOOR etc. With the KST-D these connectors can also be mounted into all D holes.Thus the most versatile desired configurations in any mediatechnical installation will become a reality!

* please specify colour: black (-SW) white (-WS)** please specify colour: red (-RT) green (-GN) yellow (-GE) blue (-BL) black (-SW) white (-WS)

Multiple adapter bases for ground tanks and 19“ racks can be found at the end of the “Multicore Systems“ chapter and in the “Modular Systems“ section.


1 KST-AFAF-P-COLOUR* Antenna fem. p Antenna fem., patch 2 KST-AMAM-P-COLOUR* Antenna male p Antenna male, patch

KST-BEF-SW Banane fem. p Solder/push-on connection, black

3 KST-BEF-RT Banane fem. p Solder/push-on connection, red4 KST-BNBN-P-COLOUR** BNC fem. p BNC fem., patch 5 KST-BNBN-C-COLOUR** BNC fem. p BNC fem. at the cable6 KST-BNCI-P-COLOUR** BNC fem. p RCA fem., patch 7 KST-CICI-P-COLOUR** RCA fem. p RCA fem., patch8 KST-CICI-C-COLOUR** RCA fem. p RCA fem. at the cable9 KST-CI-S-COLOUR** RCA fem. p Plug-in / screw terminal

10 KST-FSFS-P-COLOUR* F socket p F socket, patch 11 KST-HDHD-P1-COLOUR* HDMI fem. p HDMI fem., patch12 KST-HDHD-P2-WS HDMI fem. p HDMI fem., short

installation depth, white, patch13 KST-HDHD-C-COLOUR** HDMI fem. p HDMI fem. at the cable14 KST-J3J3-P-COLOUR* 3.5 mm Stereo mini jack fem. p 3.5 mm

Stereo mini jack fem., patch15 KST-J3-S-COLOUR* 3.5 mm Stereo mini jack fem. p

Plug-in / screw terminal 16 KST-J3J3-C-COLOUR** 3.5 mm Stereo mini jack fem. p

3.5 mm Stereo mini jack fem. at the cable17 KST-J3CI-C-COLOUR** 3.5 mm Stereo mini jack fem. p

2 x RCA fem. at the cable18 KST-L1L1-P-COLOUR* SC fem. p SC fem., LWL Simplex, patch 19 KST-L3L3-P-COLOUR* LC fem. p LC fem., LWL Duplex, patch20 KST-2LS 2 x Loudspeaker panel connector, colour

coding red-black (set), clamping terminal max. 1.5 mm², rear solder tail

21 KST-RJ45C5-P RJ45 fem. p RJ45 fem., fully shielded, CAT.5e, patch


KST-RJ45C6-P RJ45 fem. p RJ45 fem., fully shielded, CAT.6, patch

KST-RJ45C6-P-90 RJ45 fem. p RJ45 fem., fully shielded, CAT.6, patch, 90° angled

KST-RJ45C6A-P RJ45 fem. p RJ45 fem., fully shielded, CAT.6a, patch

22 KST-UTPC6-P ISDN, RJ45 fem. p RJ45 fem., unshielded, CAT.6 downward compatible, patch

23 KST-UTPC6-S ISDN, RJ45 fem. p RJ45 fem., unshielded, CAT.6 downward compatible, patch, tool-free installation

24 KST-SVSV-P S-VHS, Hosiden 4 fem. p S-VHS Hosiden 4 fem., patch

25 KST-SV-S S-Video fem. p Plug-in / screw terminal26 KST-TLTL-P-COLOUR* Toslink fem. p Toslink fem., patch27 KST-UAUA-P1-COLOUR* USB A fem. p USB A fem., patch28 KST-U3AU3A-P USB 3.0 A fem. p USB 3.0 A fem., patch29 KST-UA-IDC USB A fem. p

110 IDC cutting/clamp connector30 KST-FWFW-P Firewire fem. p Firewire fem., patch31 RJ45CFXL RJ45 CAT.5/CAT.6/CAT.7 ONESIZE

socket LSA, full metal housing, compatible with Keystone format for CAT lines AWG 26 – 22, max. Ø 8.0 mm

32 RJ45CFXL-90 Downward outlet 90°33 RJ45CFXL-270 Upward outlet 90°34 KST-CAP-WS Closing cap / dummy plug, white

KST-CAP-SW Closing cap / dummy plug, white35 KST-D Closing cap / dummy plug, white36 KST-DR D shape with Keystone socket, suitable for

reverse mounting

RJ45 fem. CAT.6a, patch

ISDN, RJ45 fem.

KST-RJ45C6A-PKST-RJ45C6A-P

RJ45 CAT.5/CAT.6/CAT.7 ONESIZE socket LSA, full metal housing, compatible with Keystone format for CAT lines AWG 26 – 22, max. Ø 8.0 mm

ACTIVE COMPONENTS



ACTI

VE C

OMPO

NENT

SACTIVE COMPONENTS

Picolino DI-box passive – for impedance adaptation of high resistance sources and for electrical isolation. With groundlift switch and loop out for instrument signals.

TECHNICAL DATA:Connection input:. . . . . . . . . . . . Jack 6.3 mm, unbalancedLoop out, parallel to input: . . . . Jack 6.3 mm, unbalancedInput impedance: . . . . . . . . . . . . 66 kΩMax. input vevel: . . . . . . . . . . . . +6 dBuConnection output:. . . . . . . . . . . XLR 3-pin, transformer balancedOutput impedance: . . . . . . . . . . 600 ΩTransformation behavior: . . . . . . 10 : 1.1Frequency range: . . . . . . . . . . . . 20 Hz – 30 kHz ±1 dB ref. 1 kHzDistortion factor:. . . . . . . . . . . . . 0.01 % at 1 kHzTest voltage: . . . . . . . . . . . . . . . . 1.5 kV/AC Dimensions: . . . . . . . . . . . . . . . . H: 31 mm, W: 26 mm (as D-hole), L: 106 mm

ORDER NO. VERSIONK-PDI-P Jack-F 6.3 mm p XLR-M + jack loop out

K-PDI-P-L Jack-F 6.3 mm p XLR-M + jack loop out, long – directly plugable

Picolino DI-box active – for impedance adaptation of high resistance sources(e.g. guitar, bass). Active switching enables an input impedance of up to 1 MΩ. With –20 dB PAD-switch and loop out for instrument signals.

TECHNICAL DATA:Connection input:. . . . . . . . . . . . Jack 6.3 mm, unbalancedLoop out, parallel to input: . . . . Jack 6.3 mm unbalancedInput impedance: . . . . . . . . . . . . 1 MΩ (20 dB PAD –10 kΩ)Max. input level: . . . . . . . . . . . . +10 dBv (20 dB PAD – +30 dBv)Connection output:. . . . . . . . . . . XLR 3-pin, balancedOutput impedance: . . . . . . . . . . 600 ΩMax. output level: . . . . . . . . . . . +10 dBvFrequency range: . . . . . . . . . . . . 20 Hz – 30 kHz ±3 dB Distortion factor:. . . . . . . . . . . . . 0.01 % at 100 Hz – 20 kHzPower supply:. . . . . . . . . . . . . . . 48 V via phantom supplyDimensions: . . . . . . . . . . . . . . . . H: 31 mm, W: 26 mm (as D-hole), L: 106 mm

ORDER NO. VERSIONK-PDI-A-L Jack-F 6.3 mm p XLR-M + jack loop out, long – directly plugable

convinces with superior broadcast quality and a very small design which makes it suitable for space-saving universal applications. You can, for example, plug the DI-box directly into the XLR-input on the stagebox to function unobtrusively, just like a standard adapter. The Picolino DI-box series stands out with high quality transmission technology and intelligent switching and ensures superior signal conversion in studio quality. Active and passive DI-boxes as well as AES/EBU-impedance converters are available in several different designs.

The PICOLINO Series

THE

EG

G BOX

ORDER NO. VERSION

K-IWP75-110 75 Ω —> 110 Ω, BNC p XLR-M K-IWP75-110-L 75 Ω —> 110 Ω, BNC, BNC p XLR-M, long – directly plugable

K-IWP110-75 110 Ω —> 75 Ω, BNC, BNC p XLR-F

K-IWP110-75-12 incl. >12 dB PAD for AES 3id

K-IWP110-75-18 incl. >18 dB PAD for S/PDIF

K-IWP110-75-L 110 Ω —> 75 Ω, BNC, BNC p XLR-F, long – directly plugable K-IWP110-75-L-12 incl. >12 dB PAD for AES 3id K-IWP110-75-L-18 incl. >18 dB PAD for S/PDIF

PICOLINO AES-impedance converter – for impedance adaptation of digital audio signals, AES/EBU – AES3 (110 Ω) and AES3id, or S/PDIF (75 Ω) as well as electrical isolation of signals. Technically it complies with the AES Norm, thus it can be used for broadcasting, and of course studio and event technologies without limitation. Neutrik or HICON XLR- and Damar&Hagen BNC-connectors are used for accessories.

TECHNICAL DATA:Transformation behavior: . . . . . . 110 : 75 Ω / 75 : 110 ΩTest voltage: . . . . . . . . . . . . . . . . 0.5 kV/AC Coupling capacitance: . . . . . . . < 20 pF 12 dB PAD for AES 3id (3.3 V zu 1 V) and 18 dB PAD for S/PDIF (3.3 V zu 0.5 V) availableDimensions: . . . . . . . . . . . . . . . . H: 31 mm, W: 26 mm (like D-flange), L: 50 mm

APPLICATION:• Impedance adaptation of digital audio signals• Transmission of digital audio signals over long cable lengths• Use of more reasonably priced 75 Ω cables (e.g. Slimline or Focusline)

to transmit AES-signals


PAN01 PAN04

PDI01

PAN02

PAN03

PRM-MS

PLI04


ACTI

VE C

OMPO

NENT

S

ACTIVE COMPONENTS

DI-BOXESare used for adaptation. The DI-box can convert high resistance, unbalanced signals coming from electrical music instrument, such as keyboard, CD-players as well as speaker outputs and adapt them for low resistance, balanced microphone input on stageboxes or mixing boards.The passive DI-box covers more than 90 % of all standard applications. We have selected a few high quality DI- and split boxes made by Palmer just for you.

Passive DI-box with stainless steel casing. Jack input with parallel output to loop the signal through. Transformer-balance XLR-output. Input sensibility adjustable. Line and speaker signal levels can be processed. Input impedance: 68 kΩ, output impedance 600 Ω.Transmission ratio balancing transmitter: 10:1Max. output level: +6 dBu, ground lift switch

The Media-DI-Box PLI04 is ideal for interference-free audio connection of PCs, laptops, or other consumer units to a professional sound system or studio console. The unbalanced signals are connected via 2 x 6.3 mm jack sockets or 2 x RCA sockets, or a 3.5 mm stereo jack socket and balanced onto 2 x XLR male outputs. A mono-switch creates a balanced mono-signal on both outputs. The ground lift switch has an additional soft-ground function.

...are used if a signal source is to be split onto several inputs. For example, if the microphone signal is to be transmitted simultaneously to the hall mixing board on the hall system, the monitor mixing board on stage, and – because the event is also being broadcast – into the transmission vehicle.

ORDER NO. DESCRIPTION PRM-MS Passive split box 4 channel

Studio & stage equipment / Accessories DI-BOXES

Studio & stage equipment /Accessories SPLIT BOXES

Active DI-box. Battery operation or 48 V-phantom supply possible. Active switching enables a high input impedance of 1 MΩ and increased sensibility for input signals. (Typical difference between in- and output –4 dB). The max. output voltage for the phantom supply is +10 dBu. Output: trafo-balanced. Due to special “floating ground“ switching the ground lift switch also functions with phantom supply. Steel panel casing 110 x 73 x 42 mm.

ORDER NO. DESCRIPTION PAN02 DI-box active mono

Professional DI-boxNo loss in sound with an extremely high quality balancing transmitter made of MU-metal, a balanced frequency response characteristic for the entire audio range of 40 to 20 kHz, max. overmodulation stability due to the large adaptation range. Mechanically extremely robust with a die-cast casing made of a special alloy that additionally protects against interference. Triple attenuator: 0 dB, –20 dB, –40 dBInput: Jack, parallel socket for loopingOutput: Insulated XLR/m-socket, Pin 2 hot, ground lift switchInput level max: +50 dB in –40 dB position Input impedance: 68 kΩ, transformer 10:1 ratio

ORDER NO. DESCRIPTION PDI01 DI-box passive mono

Active 4-fold DI-box in 19“ casing. The technical data is identical with that of the PAN 02. But the PAN 03 is generally mains-operated (power supply fix-installed on the unit). All connections and switches are located on the 1 U front panel, in addition the XLR-output is available as a parallel socket at the rear. 19“/1 U casing, 90 mm deep.

ORDER NO. DESCRIPTION PAN03 DI-box active 4 channel

ORDER NO. DESCRIPTION PAN01 DI-box passiv mono PAN04 DI-box passiv stereo PLI04 Pro media DI-box passive stereo


1

2

3


ACTI

VE C

OMPO

NENT

SACTIVE COMPONENTS

Happy little helpers...Laptop on balanced input? Fast and easy isolation of a channel? No problem! Our happy little helpers offer fast solutions for many problems. The HI-TFO-004 split adapter has 3-pin XLR-connectors on both sides for your cable connections. The signal is galvanically separated by an integrated 1:1 transmitter. The HI-TFO-003 stereo balancing adapter has a 3-pin XLR-socket on the laptop side and a 5-pin XLR-plug on the opposite side. To connect your laptop, all you need is our cable with mini-jack stereo male p 3-pin XLR-connector. On the 5-pin XLR-output you can now use a second cable to separate your signal onto two balanced 3-pin XLR‘s in order to connect a professional mixing board.The robust metal housing holds high quality SOMMER CABLE transmitters with large windings and metal XLR-mounting plugs/sockets made by HICON.

Studio & stage equipment /Accessories HI-TFO

ORDER NO. DESCRIPTION HI-TFO-004 Split adapter XLR 3-pin p XLR 3-pin HI-TFO-003 Stereo balancing adapter CSDQ-0025-SW Adapter cable 0.25 m for HI-TFO-003 to mini-jack laptopPCGU-0500-SW Adapter cable 5.0 m for HI-TFO-003 on mix. board

Other lengths and version are available upon request.

WALLEX-HDMI incl. power unit

HDMI wall-mount module/ HDMI CAT.5/6 extender wall module

This fully wired HDMI wall module system range in RAL9010 is available in 3 versions.1. Single HDMI wall connection with breakout cable2. Double HDMI wall connection with 2 breakout cables 3. HDMI CAT.5/6 extender wall connection with transmitter and receiver

The HDMI extender system consists of a transmitter with a power lead and HDMIsocket, a receiver with HDMI socket as well as the corresponding 5 V, 2 A DCtransmitter power supply. The HDMI signal can be transmitted over a max. of 40 metres in a wall- or surface-mounted duct with two CAT.5 AWG24 cables or up to 60 metres with two CAT.6 AWG24 cables. (One CAT lead for sound, one CAT lead for picture).The recommended HDMI cable length from the socket to the component is 2 – 3 metres here. Smaller HD formats (720p, 480p) can be transmitted with longer cable lengths than specified.The active signal is displayed on the transmitter and receiver via a red LED.Ideal for communications provision in training and conference rooms.

hole size: 60 mm suitable for common flush- and surface-mounted socketsExternal frame dim.: 80.5 mm x 80.5 mm x 33 mmBandwidth: 2.25 Gbit/s

ORDER NO. DESCRIPTION 1 WALL1-HDMI Single HDMI wall connection –

0.17 m breakout cable2 WALL2-HDMI Double HDMI wall connection –

2 x 0.17 m breakout cable3 WALLEX-HDMI HDMI CAT.5/CAT.6 wall module extension system,

incl. 5 V DC power supply


3D

2K1080p+

4K

ARC+HEC

3D

2K1080p+

4K

ARC+HEC

1


ACTI

VE C

OMPO

NENT

S

ACTIVE COMPONENTS

This practical HDMI-splitter, in compliance with the 1.3 Standard, enables signal distribution from an HDMI-source (SAT-receiver, DVD-player, media computer, etc.) onto 4 or 8 HDMI-receivers. It is ideal for media, dealer, presentation, and training facilities. It supports 480i/p, 576i/p, 720i/p, and 1080i/p, DTS, and home cinema 7.1. The max. cable length is 15 m. Power is provided by a 12 V power supply (included in the delivery).

Studio & stage equipment /Accessories HDMI-SPLITTER

This high-quality and low-priced 100 m HD BaseT extension system is ideal for all communications and event technicians.A CAT.6 cable with a max. length of 100 m allows you to transmit a “high-resolution High Speed HDMI with Ethernet“ signal (1080p, 3D, 4K, ARC, HDCP, 7.1CH, home cinema TrueHD, DTS-HD) plus two additional 10/100 baseT signals (e.g. for additional notebook/PC connection).The set consists of a transmitter, a receiver, 2 5 VDC (0.35 A) power supplies and a wired IR transmitter. The infrared function enables you to remotely control a device connected via HDMI (e.g. Blu-Ray player). This links the wired IR transmitter to the HDBT transmitter and directs it at the device. To control the device, point your remote control in the direction of the IR interface on the receiver.

Temperature range: 0 °C…+40 °C

Suitable installation cable: 580-0255F (S/FTP CAT.7, 1000 MHz).Mobile network cable systems can be found in the chapter on “Premade Cables/Media Technology“.

ORDER NO. HI-HDBT-EX1

Studio & stage equipment /Accessories HD BaseT – Extension system

The installation cable set for the HD BaseT extension system consists of a single-sided premade CAT.7 installation lead (1000 MHz) with an open end that can be laid perfectly in ducts and cut to length as required. The tool-free RJ45 metal plug for the open end is included.

ORDER NO. LENGTH I740-4000-OR 40 m I740-5000-OR 50 m I740-7000-OR 70 m I740-1H00-OR 100 m

RJ45C6XL, mounted p open end (RJ45C6XL enclosed)

ORDER NO. IN-/OUTPUTS DIMENSIONS [W x H x D] 1 HD-SP12 1 / 2 84 x 24 x 48 mm 2 HD-SP14 1 / 4 175 x 24 x 114 mm 3 HD-SP18 1 / 8 235 x 32 x 132 mm

Front

Back

2K1080p+

4KNEW!

NEW!

NEW!

2

3


KR-PT102VN KR-104LN KR-VM51 KR-105VB

KR-PT102SN KR-103YCB KR-105S

KR-TR1

KR-TR1YC

KR-104LN

KR-105SKR-103YCBKR-103YCB

KR-105VB

KR-VM2HD KR-VM4HDXL KR-673RKR-673TKR-673T KR-673R


ACTI

VE C

OMPO

NENT

SACTIVE COMPONENTS

Analog/digital Video Formats

If we want to transmit video signals we have to observe the different video signals. They determine the specifications for the amplifier.

1. FBAS analog video; composite transmission with one cable; 1-channel amplifier

ORDER NO. SIGNAL BANDWIDTH LEVEL IN OUT CONNECT. OTHER CHARACTERISTICSKR-PT102VN FBAS 430 MHz 1 Vpp nominal; 75 Ω 1 2 BNC Gain + EQ; screw driver

KR-104LN FBAS 400 MHz 1 Vpp nominal; 75 Ω; ∆ –1.3/+6 dB 1 4 BNC Gain + EQ; screw driver

KR-VM51 FBAS 400 MHz 1 Vpp nominal; 75 Ω; ∆ –0.9/+1.9 dB 1 5 BNC Gain + EQ; screw driver

KR-105VB FBAS 280 MHz 1 Vpp nominal; 75 Ω 1 5 BNC –

KR-TR1 FBAS 5.8 MHz 1 Vpp nominal; 75 Ω 1 1 BNC –

2. Y/C; (S-video) Analog video transmission with two cables; 2-channel amplifier

Y = Luminance Cable 1 transmits Image information Blank signal for image change Synchronized impulse for line changeC = Chrominance Cable 2 transmits Color information

3. SDI / HD-SDI

ORDER NO. SIGNAL BANDWIDTH LEVEL IN OUT CONNECT. OTHER CHARACTERISTICSKR-PT102SN Y/C 150 MHz 1.3 Vpp nominal; 75 Ω

Y: ∆ –1.9/+5.1 dB; C: ∆ 0/+6.8 dB1 2 S-video

KR-103YCB Y/C 400 MHz 1 Vpp nominal; 75 Ω; 1 3 BNC/S-video Poti: Gain (Y); Gain (C);

Y: ∆ –1/+6.5 dB; C: ∆ –0.6/+5.9 dB Luma (Y) EQ

KR-105S Y/C 230 MHz 1 Vpp nominal; 75 Ω; 1 5 S-video –

KR-TR1YC Y/C 18 MHz – 1 1 S-video –

ORDER NO. SIGNAL DATA RATE LEVEL IN OUT CONNECTIONKR-VM2HD SDI; HD-SDI to 1485 MBit/s 800 mVss/75 Ω 1 2 BNC

KR-VM2HDXL SDI; HD-SDI to 3 GBit/s 800 mVss/75 Ω 1 2 BNC

KR-VM4HDXL SDI; HD-SDI to 3 GBit/s 800 mVss/75 Ω 1 4 BNC

KR-673R/T SDI; HD-SDI to 3 GBit/s – R: 1 x Fiber-Optic SCT: 4 x BNC

4 x BNC1 x Fiber Optic SC

BNC/SCNEW!

NEW!

NEW!


KR-VP2LKR-VP200DXLKR-VP200DXLKR-VP200DXLKR-VP200K KR-VP200AK


ACTI

VE C

OMPO

NENT

S

ACTIVE COMPONENTS

To transmit a Powerpoint presentation with a resolution of only(!) 800 x 600 pixels and a screen change frequency of 60 Hz we need a bandwidth of at least 30 MHz.The following distribution amplifiers have a bandwidth of > 400 MHz (depending on the damping value on the connection cables).

ORDER NO. SIGNAL BANDWIDTH IN OUT CONNECT. OTHER CHARACTERISTICSKR-VP200K VGA/XGA 400 MHz 1 2 HD-15 –

KR-VP200AK VGA/XGA + audio 510 MHz 1 2 HD-15 Audio connection via screw connections

KR-VP200DXL VGA/XGA 400 MHz 1 2 HD-15 Poti: level; EQ switch: ID-bit

KR-VP210XL VGA/XGA 400 MHz 1 1 + loop HD-15 Poti: level; EQ switch: ID-bit

KR-VP2L VGA/XGA 400 MHz 1 1 HD-15 –

All other KRAMER products are available short-term.

For RGBHV (VGA/XGA)The significant difference between the transmission of TV images and computer image is the number of lines per image and the image change frequency.

The number of lines for TV images is odd.The number of lines for computer is even.

This makes the two signal types incompatible.

Usually the analog output on our PC is a 15-pin HD-socket. Five signals are available here, each transmitted on one line:

Line 1: Red Analog image signal red 0.7 Vss on 75 Ω Line 2: Green Analog image signal green 0.7 Vss on 75 Ω Line 3: Blue Analog image signal blue 0.7 Vss on 75 Ω Line 4: Horizontal frequency Line change impulse TTL-level (2 – 10 Vss)Line 5: Vertical frequency Line change impulse TTL-level (2 – 10 Vss)

The signals for horizontal and vertical deflection differ widely, depending on the PC manufacturer. This also handicaps transmission over long distances. The higher image resolutions on the PC require significantly higher bandwidths (stated in MHz). The following chart clarifies the issue.

RESOLUTION BANDWIDTH at an image refresh rate of ...WIDTH HEIGHT RESOLUTION PIXEL 50 Hz 60 Hz 72 Hz 100 Hz

640 x 480 VGA 307.200 46.08 MHz 55.29 MHz 66.36 MHz 92.16 MHz

800 x 600 SVGA 480.000 72.00 MHz 86.40 MHz 103.68 MHz 144.00 MHz

1024 x 768 XGA 786.432 117.96 MHz 141.57 MHz 169.86 MHz 235.92 MHz

1152 x 864 XGA+ 995.328 119.44 MHz 149.31 MHz 214.98 MHz 298.59 MHz

1280 x 768 WXGA 983.040 147.45 MHz 176.94 MHz 212.34 MHz 294.90 MHz

1280 x 1024 SXGA 1.310.720 196.62 MHz 235.92 MHz 283.11 MHz 393.21 MHz

1400 x 1050 SXGA+ 1.470.000 220.50 MHz 264.60 MHz 317.52 MHz 441.00 MHz

1600 x 1024 SXGAW 1.638.400 245.76 MHz 294.90 MHz 353.88 MHz 491.52 MHz

1600 x 1200 UXGA 1.920.000 288.00 MHz 345.60 MHz 414.72 MHz 576.00 MHz

1680 x 1050 WSXGA+ 1.764.000 264.60 MHz 317.52 MHz 381.03 MHz 529.20 MHz

1920 x 1080 HDTV 2.073.600 311.04 MHz 373.26 MHz 447.90 MHz 662.08 MHz

1900 x 1200 UXGAW 2.280.000 342.00 MHz 410.40 MHz 492.48 MHz 684.00 MHz

1920 x 1200 WUXGA 2.304.000 345.60 MHz 414.72 MHz 497.67 MHz 691.20 MHz

2048 x 1536 QXGA 3.145.728 471.87 MHz 566.22 MHz 679.47 MHz 943.72 MHz

NEW!

NEW!


KR-401C KR-401DN KR-VP100 KR-VP414XL

KR-VP417 KR-7408 KR-7508 KR-FC4 KR-VP502XL

KR-401C

KR-FC331 KR-FC321 KR-FC332 KR-FC113KR-FC113

NEW!

NEW!

NEW!

NEW!

NEW!


ACTI

VE C

OMPO

NENT

SACTIVE COMPONENTS

ConvertersDifferent transmission format are not compatible. A converter is required forconversion. Such units are easily realized for analog use.

To convert analog TV signals into image signals for PC monitors, analog-digital converters that recalculate the image line by line on a digital level are needed. This also applies for the conversion to digital TV formats (SDI).

ORDER NO. FUNCTION INPUTS OUTPUTS BANDWIDTH LEVEL CONNECTIONKR-401C Format converter 1 x Y/C 2 x Y/C + 2 x FBAS 160 MHz 1 Vpp nominal; 75 Ω S-video / BNC (FBAS)

KR-401DN Format converter 1 x FBAS 1 x Y/C 3.6 MHz (Y) Y = 1 Vpp; 75 Ω C = 1 Vpp; 75 Ω

BNC (FBAS); S-video

KR-VP100 Standard PC interface

1 x VGA 1 x VGA + 1 x RGBHV 360 MHz 0.7 Vpp 75 Ω; H+V = TTL-level

HD-15; 5 x BNC

KR-VP414XL

Scaler/format converter to VGA, HD

1 x FBAS; 1x Y/C analog: RGBHV Output RGBHV for VGA, SVGA, XGA + WXGA

1 Vpp 75 Ω HD-15

KR-VP417

Format converter 1 x Y/C + 1x CV 1x VGA + 1x DVI-I –

KR-7408 Format converterprogrammablevia RS232

1 x SDI 1 x SDI; 1 x FBAS;1 x Y/C / YUV

5.7 MHz (analog) SDI ref. SMPTE-259M BNC; DSUB 9p

KR-7508 Format converterprogrammablevia RS232

1 x FBAS; 1x Y/C 2 x SDI Digital res: 10 Bit SDI ref. SMPTE-259M BNC (FBAS); S-videoDSUB 9p

KR-FC4 Format converter 1 x RGBS 1 x YUV Component video

> 5 MHz 0.7 Vpp 75 Ω SCART/3 x RCA

KR-VP502XL Scan converter VGA/UXGA; HD Composite video / S-video

1 Vpp 75 Ω HD-15; BNC, S-video

KR-FC331 Format converter 1 xBNC 1 x HDMI+ 1 x BNC (Loop)

max. 3 GBit/s

KR-FC321 Format converter 2 x BNC 1 x HDMI max. 3 GBit/s

KR-FC332 Format converter 1 x BNC 2 x HDMI + 1 x BNC (Loop)

max. 3 GBit/s

KR-FC113 Format converter 1 x HDMI 2 x BNC max. 3 GBit/s

All other KRAMER products are available at short notice.


KR-840

KR-PT101HDCP KR-610R/T

KR-621T KR-621R KR-VS21HDCP KR-VM4HDCP KR-FC31XL

KR-810KR-810 KR-VP800KR-VP800

KR-PT101HDCP KR-610R/T

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

KR-650TKR-650RKR-PT572HDCP+KR-PT571HDCPKR-671RKR-671T

DVI


ACTI

VE C

OMPO

NENT

S

ACTIVE COMPONENTS

ORDER NO. SIGNAL LEVEL CONNECTION OTHER PROPERTIES

KR-810Y/C + FBAS PAL/NTSC 1 Vpp nominal; 75 Ω, +6 dBu S-video / BNC (FBAS) Test generator; color beams + 1 KHz

+ bal. audio 1 KHz Screw clamp

KR-VP800 VGA; SVGA; XGA; SXGA 0.7 Vpp 75 Ω; H+V = TTL-level HD 15 Test generator color beams

KR-840 DVI-D 1.2 Vpp DVI-I Test image generator

Signal generatorsOf course you can make a quick check of the video connection, but it is better to have a reference signal available in the form of generators that fit any tool box.

The DVI-signal enables direct digital signal transmission from a graphic cart to an image for TFT or a beamer. And because the digital DVI-format is not compatible with the analog VGA-signal, special switches and splitters are needed to distribute and convert the signal. Long distance transmission is also possible with suitable amplifiers.

ORDER NO. FUNCTION INPUTS OUTPUTSMAX. DATA

RATEDIMENSIONS

[W x D x H]OTHER

FEATURESKR-PT101HDCP DVI repeater with HDCP 1 x DVI-D

(24+5 socket)1 x DVI-D (24+5 socket) 2.25 Gbit/s 6.20 x 5.20 x 3.20 cm –

KR-610R/T DVI-D optical set 1 x DVI-D (24+5 socket)

1 x DVI-D (24+5 socket) 1.65 GBit/s 3.80 x 7.20 x 1.90 cm LWL connection via four-way LC cable, not HDCP compatible.

KR-621T DVI optical transmitter DVI-D, 24+5 socket

4 x LC, 1 x RJ45 1.65 GBit/s 12.00 x 8.05 x 2.75 cm –

KR-621R DVI optical receiver 4 x LC, 1 x RJ45

DVI-I, 24+5 socket 1.65 GBit/s 12.00 x 8.05 x 2.75 cm –

KR-VS21HDCP DVI switch 2 x DVI-I 1 x DVI-I 1.65 GBit/s 12.00 x 7.50 x 2.50 cm –

KR-VM4HDCPXL DVI distribution amplifier 1 x DVI-I 4 x DVI-I 2.25 GBit/s 48.30 x 17.80 x 4.50 cm HDTV compatible

KR-FC31XL Format converter 1 x VGA 1 x DVI-D (24+5 socket) 1.65 GBit/s 10.70 x 15.90 x 4.00 cm Control via DIP switch

KR-671T DVI via fibre optic transmitter 1 x DVI-D (24+5 socket)

1 x SC Multimode 3.4 GBit/s per channel

12.00 x 7.95 x 2.76 cm –

KR-671R DVI via fibre optic receiver 1x SC Multimode 1 x DVI-D (24+5 socket) 3.4 GBit/s per channel

12.00 x 7.95 x 2.76 cm –

KR-PT571HDCP Twisted Pair transmitter for DVI 1 x DVI-D (24+5 socket)

1 x RJ45 1.65 GBit/s 6.20 x 5.20 x 2.40 cm –

KR-PT572HDCP+ Twisted Pair transmitter for DVI 1 x RJ45 1 x DVI-D (24+5 socket) 1.65 GBit/s 6.20 x 5.20 x 2.40 cm –

KR-650R DVI coax receiver 5 x BNC 1 x DVI-D (24+5 socket) 1.65 GBit/s 12.00 x 7.00 x 2.40 cm incl. RS232 + IR

KR-650T DVI coax transmitter 1 x DVI-D (24+5 socket)

5 x BNC 1.65 GBit/s 12.00 x 7.00 x 2.40 cm incl. RS232 + IR


KR-631T KR-631R KR-VS21H-IRKR-631T KR-631R

KR-VP418XL KR-640T

KR-VS21H-IRKR-VS21H-IR

KR-VM2HXLKR-VM2HXL

KR-PT101HXLKR-PT101HXLKR-PT101HXL KR-VM22HKR-VM22H

KR-PT572+KR-TP582T KR-PT571KR-670RKR-670T

KR-TP582R

KR-VS41H

KR-VM4HXL KR-VM28H

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!

NEW!


ACTI

VE C

OMPO

NENT

SACTIVE COMPONENTS

The HDMI-standard not only plays an ever increasing role in media/presentation technologies. Just like with DVI, splitters and amplifiers are needed for successful HDMI-transmissions. One bit of information: HDMI image signals can be encoded

with HDCP. We have identified these HDCP compatible units accordingly in the chart.

HDMI

ORDER NO. FUNCTION INPUTS OUTPUTSMAX. DATA RATE

DIMENSIONS [W x D x H] CONNECTION

KR-631T HDMI optical transmitter HDMI 1 x RJ45, 4 x LC 1.65 GBit/s 12.0 x 7.95 x 2.76 cm

KR-631R HDMI optical receiver 1 x RJ45, 4 x LC HDMI 1.65 GBit/s 12.0 x 7.95 x 2.76 cm

KR-VS21H-IR HDMI switch 2 1 2.25 GBit/s 12.0 x 7.2 x 2.8 cm

KR-VS41H HDMI switch 4 1 2.25 GBit/s 48.3 x 17.8 x 4.5 cm

KR-VM2HXL HDMI distribution amplifier 1 2 2.25 GBit/s 12.0 x 7.5 x 2.5 cm

KR-VM4HXL HDMI distribution amplifier 1 4 2.25 GBit/s 48.3 x 17.8 x 4.5 cm

KR-VM28H HDMI distribution amplifier 1 + 1 8 2.25 GBit/s 48.3 x 17.8 x 4.5 cm

KR-VP418XL Digital scaler 1 x CV, 1 x S-video,2 x RCA audio analogue, 2 x RCA digital audio S/PDIF

1 x HDMI – 21.5 x 16.3 x 4.4 cm

KR-PT101HXL HDMI repeater 1 1 2.25 GBit/s 6.2 x 5.0 x 2.4 cm Input also possible via RJ45 / Parallel audio out via S/PDIF

KR-VM22H HDMI distribution amplifier 1 + 1 2 2.25 GBit/s 12.0 x 7.15 x 2.44 cm

KR-640T HDMI coax transmitter 1 x HDMI 5 x BNC 10.2 GBit/s On request

KR-640R HDMI coax receiver 5 x BNC 1 x HDMI 10.2 GBit/s On request

KR-TP582R Twisted pair receiver for HDMI

1 x RJ45 2 x HDMI1 x RJ45 network1 x RS232 (D9f)1 x TOSLINK1 x S/PDIF (RCA)

2.25 GBit/s 18.8 x 11.4 x 2.4 cm

KR-TP582T Twisted pair transmitter for HDMI

2 x HDMI socket (switchable)1 x RJ45 (network)1 x RS232 (D9f)

1 x RJ45 2.25 GBit/s 18.8 x 11.4 x 2.4 cm

KR-670T HDMI via fibre optic transmitter

1 x HDMI 1 x SC Multimode 3.5 GBit/s per channel

12.0 x 7.95 x 2.76 cm

KR-670R HDMI via fibre optic receiver

1 x SC Multimode 1 x HDMI 3.5 GBit/s per channel

12.0 x 7.95 x 2.76 cm

KR-PT571 Twisted pair transmitter for HDMI

1 x HDMI 1 x RJ45 1.65 Gbit/s 6.20 x 5.20 x 2.40 cm

KR-PT572+ Twisted pair receiver for HDMI

1 x RJ45 1 x HDMI 1.65 Gbit/s 6.20 x 5.20 x 2.40 cm


KR-705XL KR-TP122 KR-TP124KR-TP50KR-TP50KR-TP50 KR-TP105HD

NEW!

NEW!


ACTI

VE C

OMPO

NENT

S

ACTIVE COMPONENTS

A seamless switcher is primarily a selection switch that can switch different image sources onto one output. But the KR-VP728 can even do more. Video sources in FBAS-formats; Y/C and component (YUV), and sources with VGA- and DVI-formats can be connected. Digital processing takes place internally so that an optimized high resolution image arrives at the projector. The switcher can be operated with the IP-remote control included in the delivery. The input and output formats as well asthe picture-in-picture function (PIP) can be programmed very easily on the keyboard or the remote control via OSD (On Screen Display).

ORDER NO. KR-VP728

Of course we have all KRAMER products

available, further articles can be found on our

website www.sommercable.com

or upon request.

TECHNICAL DATA:INPUT: 4 x universal Y/CV, Pb/C, Pr (CV, S-video and components)

1 Vss / 75 Ω with RCA sockets; 2 x UXGA with HD15F-socket (VGA to UXGA); 2 x HDMI-sockets; 1 x USB-socket; stereo-audio input and digital S/PDIF-input with RCA sockets is provided for each universal input; unbalanced stereo-audio input with 3.5 mm socket is provided for each UXGA-input.

OUTPUT: 1 x HDMI-socket; 1 x UXGA with HD15-socket;1 x unbalanced stereo-audio with RCA sockets; 1 x digital S/PDIF audio with RCA socket

SIZE: 48.3 cm x 23.6 cm x 4.5 cm [W x D x H]POWER: 100 – 240 VAC, 50/60 Hz, 30 VA, automatic power supply

It may be easier to use a twisted-pair cable for long distance transmission. The purchase price of the unit can be easily compensated for with the money you save

on cabling. It is important to use the recommended cable types, otherwise the max. transmission lengths may be shorter.

ORDER NO. SIGNAL / FUNCTION INPUT OUTPUT CABLE / LENGTH REMARKSKR-705XL FBAS / CV transmitter BNC 2 x Twisted Pair / clamps UTP / 1,000 m

BNC loop out

KR-706XL FBAS / CV receiver Twisted Pair / clamps 2 x BNC parallelTwisted Pair / clamps loop out

KR-PT110EDID VGA / XGA 1 x HD15f 1 x RJ45 F/UTP / 100 m

KR-PT120 VGA/UXGA twisted-pair receiver

1 x RJ45 1 x HD-15 UTP / 100 m

KR-TP41 YUV + S/PDIF transmitter 3 x RCA (YUV) + 1 x RCA (S/PDIF)

RJ45 UTP / 100 m

KR-TP42 YUV + S/PDIF receiver RJ45 3 x RCA (YUV)1 x RCA (S/PDIF)

KR-TP121 VGA + audio transmitter Sub-D 15HD (VGA) RJ45 UTP / 100 m3.5 mm jack (audio)

KR-TP122 VGA + audio receiver RJ45 Sub-D 15HD (VGA) Parallel audio out Analogue and digital3.5 mm jack (audio)

RCA (S/PDIF audio)

KR-TP50 TP receiver & converter 1 x RJ45 2 x Sub-D 15HD (XGA), 1 x RJ45, 2 x 3.5 mm socket (audio) 2 x RCA (S/PDIF-audio)

UTP

KR-TP123 VGA / audio / RS232 transmitter

Sub-D 15HD (VGA) RJ45 UTP / 100 m3.5 mm jack (audio)Twisted Pair/clamps (RS232)

KR-TP124 VGA / audio / RS232 transmitter

RJ45 Sub-D 15HD (VGA) Parallel audio out Analogue and digital3.5 mm jack (audio)

RCA (S/PDIF audio)Twisted Pair / clamps (RS232)

KR-TP300FW FireWire transmitter / receiver

6-pin FireWire (input and output)

RJ45 STP / 100 m Max. bandwidth 100 MBit/s

RJ45 loop in

KR-TP105HD Universal 1 x RJ45 2 x RJ45 F/UTP / 50 m

Twisted pair transmitters

KR-VP728 Seamless Switcher for Conference Applications


IX-01-0001

IX-01-0003-EU

IX-01-0004

NEW!

NEW!

NEW!

NEW!

IX-01-0004IX-01-0004

IX-01-0005


ACTI

VE C

OMPO

NENT

SACTIVE COMPONENTS

Active components INTELIX BALUNS

BORN IN THE U.S.A...Intelix was founded in 1986 and is a rather young company located in Middleton Wisconsin. The company produces and manufactures high quality and – as the name says – intelligent audio/video and network Baluns as well as many other multimedia distribution products.

In Germany American companies are often considered somewhat conservative and lethargic, not really interested in grooming the German market, because it is tiny compared to the US-market. But forget your preconceptions: Intelix is different.

The company has more than 200 distributors around the world. Intelix audio/video and network distribution products are can be found all over the USA, in well-known conference centres, hotel chains, sporting arenas, at the Olympic Games, amusement parks (right, the one with the famous duck and mouse) or in the Dow Jones building.SOMMER CABLE is the exclusive distributor for Intelix products in Germany and we have the majority of their products in stock.

Intelix Baluns“Balun“ is the imaginative and simple abbreviation for balanced – unbalanced. These units convert unbalanced audio or video input signals for a simple RJ45-connection with 4 balanced twisted pair cables. Almost all are passive, i.e. no power is required. A suitable power supply is included units requiring power.Some Intelix Baluns versions are also available in a compact design for power socket installation. They may be used in combination with the respective standard Baluns units.

Intelix is a clearly structured, modern American company, founded in 1986 and managed by Steve Cohan (see photograph), a dynamic and sporty gentleman in his best years.Intelix products are strongly adapted to the European market – they are of good workmanship, have a very ergonomic and attractive design and are known for their dependability.

ORDER NO. DESCRIPTIONMAX. TRANSMISSION LENGTH with CAT.7 installation cable

PACKAGE CONTENTS

SIGNAL CONNECTION TWISTED PAIR CONNECTION

IX-01-0001 IX-AVO-A2-F 750 m 1 pcs. 2 x RCA 1 x RJ45

IX-01-0001-PAC IX-AVO-A2-PAC-F 750 m 2 pcs. 2 x RCA 1 x RJ45

IX-01-0003-EU IX-AVO-A2-WP110-EU 750 m 1 pcs. 2 x RCA IDC block

IX-01-0004 IX-AVO-A4-F 750 m 1 pcs. 4 x RCA 1 x RJ45

IX-01-0004-PAC IX-AVO-A4-PAC-F 750 m 2 pcs. 4 x RCA 1 x RJ45

IX-01-0005 IX-AVO-A4-WP110-EU 750 m 1 pcs. 4 x RCA IDC block

ANALOGUE AUDIO BALUNSTransmission of audio signals via Twisted Pair cable. This always requires 2 devices. (Transmitter and receiver are identical). We offer double sets with several products (see order numbers ending in “-PAC”).


IX-01-0101-PAC IX-01-0105 IX-01-0107-EU IX-01-0201

NEW!

NEW!

NEW!

IX-01-0301 IX-01-0303-EU IX-01-0304


ACTI

VE C

OMPO

NENT

S

ACTIVE COMPONENTS

ANALOGUE VIDEO (+AUDIO) BALUNSTransmission of video (and audio) signals via Twisted Pair cable. This always requires 2 devices. (Transmitter and receiver are identical). We offer double sets with several products (see order numbers ending in “-PAC”).


PACKAGE CONTENTS

VIDEO SIGNAL

SIGNAL CONNECTION

TWISTED PAIR CONNECTION

IX-01-0101-PAC IX-AVO-V1-PAC-F 730 m 2 pcs. FBAS 1 x BNC 1 x RJ45

IX-01-0105 IX-AVO-V1A2-F 730 m 1 pcs. FBAS 1 x RCA video, 2 x RCA audio

1 x RJ45

IX-01-0105-PAC IX-AVO-V1A2-PAC-F 730 m 2 pcs. FBAS 1 x RCA video, 2 x RCA audio

1 x RJ45

IX-01-0107-EU IX-AVO-V1A2-WP-EU 730 m 1 pcs. FBAS 1 x RCA video, 2 x RCA audio

Cutting/terminal block

IX-01-0201 IX-AVO-SVA2-F 300 m 1 pcs. S-video (Y/C) 1 x S-video, 2 x RCA audio

1 x RJ45

IX-01-0301 IX-AVO-V3AD-F 1080p: 150 m480i (PAL): 300 m

1 pcs. Components 3 x RCA video, 1 x RCA audio (digital S/PDIF)

1 x RJ45

IX-01-0301-PAC IX-AVO-V3AD-PAC-F 1080p: 150 m480i (PAL): 300 m


1 x RJ45

IX-01-0303-EU IX-AVO-V3AD-WP-EU 1080p: 150 m480i (PAL): 300 m


Cutting/terminal block

IX-01-0304 IX-AVO-V3HD-F 1080p: 150 m 1 pcs. Components 3 x BNC video 1 x RJ45

IX-01-0304-PAC IX-AVO-V3HD-PAC-F 1080p: 150 m 2 pcs. Components 3 x BNC video 1 x RJ45


IX-01-0402-EU IX-01-0404-EU

IX-02-0101-EU

IX-01-0601

IX-01-0401

IX-02--0102-EU

IX-01-0601IX-01-0601


ACTI

VE C

OMPO

NENT

SACTIVE COMPONENTS

VGA BALUNS

Transmission of analogue VGA signals via Twisted Pair cable, supplied in sets.

BALUNS DATA


PACKAGE CONTENTS

SIGNALCONNECTION


IX-01-0601 IX-AVO-USB at 12 MBit/s: 100 mat 96 Mbit/s: 30 m

1 set USB in/out 1 x RJ45


PACKAGE CONTENTS

SIGNALCONNECTION


IX-01-0401 IX-AVO-VGA VGA (640 x 480): 150 mSVGA (800 x 600): 110 mXGA (1024 x 768): 80 mSXGA (1280 x 1024): 60 m

1 set 15-pole Sub-D female 1 x RJ45

IX-01-0402-EU IX-VGA-HR-F-EU max. 110 m, max. UXGA (1600 x 1200) 1 set 15-pole Sub-D female 1 x RJ45

IX-01-0404-EU IX-VGA-UHR-F-EU max. 110 m, max. WUXGA (1920 x 1200)

1 set 15-pole Sub-D female 1 x RJ45

IX-02-0101-EU IX-DIGI-VGA-F-EU SVGA (800 x 600): 275 mXGA (1024 x 768): 200 mSXGA (1280 x 1024): 160 mUXGA (1600 x 1200): 110 mWUXGA (1920 x 1200): 80 m

1 set Transmitter: 1 x 15-pole Sub-D female in 1 x 15-pole Sub-D female out Mini RCA in/out for audioReceiver: 2 x 15-pole Sub-D female parallel 2 x Mini RCA for audio

1 x RJ45

IX-02-0102-EU IX-DIGI-VGASD-EU max. 110 m, max. UXGA (1600 x 1200)

1 set Transmitter: 1 x 15-pole Sub-D female in 1 x 15-pole Sub-D female out Mini RCA in/out for audio Mini RCA in/out for infrared 1 x Sub-D09 male for RS232Receiver: 2 x 15-pole Sub-D female parallel 2 x Mini RCA for audio 2 x Mini RCA for infrared 1 x Sub-D09 male for RS232

1 x RJ45

NEW!

NEW!

NEW!


IX-02-0201-EU

IX-02-0202-EU

IX-02-0203-EU IX-02-0204-EU


ACTI

VE C

OMPO

NENT

S

ACTIVE COMPONENTS


PACKAGE CONTENTS

SIGNALCONNECTION TWISTED PAIR CONNECTION

IX-02-0201-EU IX-DIGI-DVI-EU 720p: 45 m1080i: 45 m1280 x 1024: 45 m1680 x 1050: 30 m1900 x 1200: 18 m

1 set DVI 24 + 5 socket (Wired as DVI-D)

2 x RJ45 (both cables must be connected)

IX-02-0202-EU IX-DIGI-DVIT2R-EU 65 m with CAT.6 shielded at 1080p

1 transmitter + 1 receiver

DVI 24 + 5 socket (Wired as DVI-D)parallel out as DVI 24 + 5

2 x RJ45 for 2 separate receivers

IX-02-0203-EU IX-DIGI-DVIT4R-EU 65 m with CAT.6 shielded at 1080p

1 transmitter + 1 receiver

DVI 24 + 5 socket (Wired as DVI-D)parallel out as DVI 24 + 5

4 x RJ45 für 4 separate receivers

IX-02-0204-EU IX-DIGI-DVI-R-EU 65 m with CAT.6 shielded at 1080p

1 additional receiver for DVIT2R and DVIT4R

DVI 24 + 5 socket(Wired as DVI-D)

1 x RJ45

DVI BALUNS (Twisted pair)

Digital transmission systems via twisted pair cable for DVI signals.


NEW!

NEW!

Set

Set

Set

IX-02-0311-EUIX-02-0312-R-EU

IX-02-0320-EU

IX-02-0312-EU

IX-02-0311-R-EU


ACTI

VE C

OMPO

NENT

SACTIVE COMPONENTS

HDMI BALUNS (Twisted pair)

Digital transmission systems via twisted pair cable for HDMI signals.


PACKAGE CONTENTS

SIGNALCONNECTION


IX-02-0311-EU IX-DIGI-HD-IR2-EU 1080p: 50 m1080i/720p: 100 m

1 set HDMI + mini RCA (for IR)

2 x RJ45(both cables must be connected)

IX-02-0311-R-EU IX-DIGI-HD-IR2-R-EU (receiver only)

1080p: 50 m1080i/720p: 100 m

1 receiver HDMI + mini RCA (for IR)

2 x RJ45(both cables must be connected)

IX-02-0312-EU IX-DIGI-HD-UHR2-EU 1080p: 50 m1080i/720p: 100 m

1 set HDMI 1 x RJ45

IX-02-0312-R-EU IX-DIGI-HD-UHR2-R-EU 1080p: 50 m1080i/720p: 100 m

1 receiver HDMI 1 x RJ45

IX-02-0320-EU IX-DIGI-HD-XR 1080p: 50 m1080i/720p: 100 m

1 receiver HDMI 1 x RJ45 in + 1 x RJ45 out

HDMI BALUNS (Coaxial)

Transmission systems for HDMI signals via coaxial cable. Transmitter with 2 parallel outputs, each can supply up to 5 cascaded receivers.


PACKAGE CONTENTS

SIGNALCONNECTION


IX-02-0315-EU IX-DIGI-HD-COAX-S-EU max. 100 m, max. 1080p

1 transmitter HDMI (720p, 1080i, 1080p)

2 x BNC parallel out

IX-02-0316-EU IX-DIGI-HD-COAX-R-EU max. 100 m, max. 1080p

1 receiver HDMI (720p, 1080i, 1080p)

1 x BNC in + 1 x BNC out


IX-02-0307-EU

NEW!

IX-02-0319-EU

IX-02-0317-EU

IX-02-0308-EU

IX-02-0318-EU


ACTI

VE C

OMPO

NENT

S

ACTIVE COMPONENTS

ORDER NO. DESCRIPTION INPUTS OUTPUTSIX-02-0307-EU IX-DIGI-HD-4X4-EU 4 x HDMI 4 x HDMI + 4 x Twisted Pair

IX-02-0308-EU IX-DIGI-HD-8X8-EU 8 x HDMI 8 x HDMI + 8 x Twisted Pair

IX-02-0317-EU IX-DIGI-HD-1X4-EU 1 x HDMI 4 x Twisted Pair



HDMI MATRIX/SPLITTER

Active matrix systems for HDMI signals. The outputs are parallel as Twisted Pairs;compatible receivers are IX-02-0311-R-EU and IX-02-0312-R-EU.

ORDER NO. DESCRIPTION INPUTS OUTPUTSIX-02-0601-EU IX-DIGI-SCAL-11X2 4 x HDMI

1 x DVI1 x VGA2 x YUV Component1 x S-video2 x FBAS

2 x HDMI

HDMI SCALER

Universal scaler with 11 inputs and 2 parallel outputs.Control via infrared and RS232.

ACTI

VE C

OMPO

NENT

S

Universal scaler with 11 inputs and 2 parallel outputs.

NEW!


NEW!


ACTI

VE C

OMPO

NENT

SACTIVE COMPONENTS

With the introduction of the CARDINAL 120 range, SOMMER CABLE is embarking on a new direction in the field of active components and audio tools.We had tried and proven designs which have

reworked into a new range with a new housing concept. We believe this range meets the highest electronic, mechanical and audiophile requirements.

Active systems DVM120 RANGE

Max. input level: . . . . . . . . . . . . . .+20 dBu / 20 Hz (THD < 0.5 %, source 200 Ω / load 2 kΩ)THD&N: . . . . . . . . . . . . . . . . . . . . .< 0.05 % input 0 dBu (20 Hz – 40 kHz, measurement bandwidth 80 kHz) < 0.01 % input 0dBu (40 Hz – 40 kHz, measurement bandwidth 80 kHz)Frequency response: . . . . . . . . . . .10 Hz – 100 kHz (±0.3 dB) Dieletric strength: . . . . . . . . . . . . . . Primary > secondary 4 kV / winding > core 2 kV Dimensions (L x W x H): . . . . . . . .260 x 120 x 51 mmWeight:. . . . . . . . . . . . . . . . . . . . . .0.8 kg

Max. level: . . . . . . . . . . . . . . . . . . .+30 dBu / 40 Hz, THD 0.5 % (source 40 Ω, load 600 Ω)THD&N: . . . . . . . . . . . . . . . . . . . . .0.15 % / 20 Hz; 0.003 % / 1 kHz

0.002 % / 20 kHz (bandwidth 80 kHz)Frequency response: . . . . . . . . . . .10 Hz –0.2 dB – 100 kHz –2 dB (source 40 Ω, load 2 kΩ) Crosstalk: . . . . . . . . . . . . . . . . . . . .1 kHz –110 dB / 10 kHz –100 dBInput symmetry: . . . . . . . . . . . . . . .100 Hz 100 dB / 1 kHz 90 dB / 20 kHz 70 dBOutput symmetry:. . . . . . . . . . . . . .> 65 dB (source < 10 Ω, load 600 Ω)Dieletric strength: . . . . . . . . . . . . . . Primary > secondary 4 kV / winding > core 2 kVDimensions (L x W x H): . . . . . . . .260 x 120 x 51 mmWeight:. . . . . . . . . . . . . . . . . . . . . .1.2 kg

A dual-channel amplifier with XLR inputs, tone control and level control provides the basis for the main path. There is an additional auxiliary input with an XLR/jack combi socket, which can be mixed to the main signal using a dedicated control.The stereo switch is used to switch between stereo and mono modes. In stereo mode, the sub/pan control is used for setting the balance of the main signal. In

mono mode, the Aux and Sub inputs are mixed with the main path via their own controls – which makes the three-channel mixer.Headphones can be connected on the front via two 6.3 mm jack sockets. All inputs are electronically balanced and can be switched from +4 dBu to –10 dBV nominal level.

PRODUCT BENEFITS:• Uncompromising mechanical design – due to

18 mm recessed front panels, 3 mm thick aluminium profile & inset stacking feet

• Integrated wide-range mains supplies (90 – 240 V) – direct connection via IEC switch/fuse combination

• Developed for highest audiophile requirements

• Exclusive use of high-quality components

APPLICATIONS:• Super high-grade audio tools

and ideal helpers for live and studio applications

DVM-120-DLI Dual Line Box – the dual-channel solution!

DVM-120-DID Dual Direct Box – the twin channel classic!

Power supply:. . . . . . . . . . . . . . . . .AC 90 – 240 V 15 VA IEC (with illuminated switch and fuse insert)Dimensions (L x W x H): . . . . . . . .260 x 120 x 51 mmWeight:. . . . . . . . . . . . . . . . . . . . . .1.2 kg

DVM 120 HPA Variable Phones Amp – the multi-purpose mini mixer

The Lundahl 1:1 line transformer used in this dual-channel device was custom-developed for applications with very high levels. It stands out by its ultra low distortion and neutral response down to extremely low frequencies. Therefore, the Dual

Line Box is perfectly suitable for the electrical isolation of active PA components or high-level line sources.Input signals are fed either via 6.3 mm jack or female XLR sockets. Both channels have separate ground

lift switches to disconnect input and output grounds as required. The output signals are on male XLR connectors.

For the easy and reliable matching of medium and high impedance sources to microphone inputs. The high-quality Lundahl transformers with 17 dB attenuation that we use are particularly suitable for applications with very high input

levels. They stand out by their ultra low distortion and neutral response even at very low frequencies.Each channel has two bridged 6.3 mm jack sockets. If necessary, the ground lift pressure switch links

the input and output grounds. The output signals are on male XLR sockets.

concept. We believe this range meets the highest electronic, mechanical and audiophile requirements.

APPLICATIONS:Super high-grade audio tools

ideal helpers for live and studio applications



ACTI

VE C

OMPO

NENT

S

ACTIVE COMPONENTS

The simple and reliable way of adapting even very demanding sources to microphone inputs. The special high-quality Lundahl transformers with 22 dB or 28 dB attenuation are suitable for high input levels and stand out by their ultra low distortion and neutral response even at very low frequencies. Each

channel has an input with two bridged jack sockets; if necessary, the input and output grounds can be linked with the ground lift switch. The output signals are on male XLR connectors.The I/P impedance switch is used to switch between the normal input impedance of 280 kΩ and the

high impedance of 560 kΩ. In the HIGH position, the design-related higher attenuation of 28 dB will occur. This allows to directly connect an electric bass or electric piano to mixing desks or pre-amplifiers with no loss and zero distortion, particularly if the instrument has no active onboard electronics.

Power supply:. . . . . . . . . . . . . . . . .AC 90 – 240 V 15 VA IEC (with illuminated switch and fuse insert)Dimensions (L x W x H): . . . . . . . .260 x 120 x 51 mmWeight:. . . . . . . . . . . . . . . . . . . . . .1.2 kg

DVM 120 SPS Remote Controlled Speaker Selector

ORDER NO. DESCRIPTION DVM-120-DID Dual DI Box DVM-120-DLI Dual Line transmitter DVM-120-HPA Headphone amplifier DVM-120-DIH HighZ DI Box DVM-120-DIT Valve DI Box DVM-120-SPS Speaker selector with remote control DVM-120-SPR Remote monitor controller

Max. level: . . . . . . . . . . . . . . . . . . .+28 dBu / 20 Hz @ THD&N ≤ 0.4 % +30 dBu / 1 kHz @ THD&N ≤ 0.001 % (source 200 Ω, load 2 kΩ)THD&N @ udBu I/P): . . . . . . . . . .≤ 0.008 % / 20Hz ≤ 0.004 % / 1 kHz

≤ 0.004 % / 40 kHz (measurement bandwidth 80 kHz)High impedance: . . . . . . . . . . . . . .≤ 0.012 % / 20 Hz ≤ 0.008 % / 1 kHz

≤ 0.008 % / 40 kHz (measurement bandwidth 80 kHz) Frequency response:Source 200 Ω, load 2k Ω: . . . . . .–0.1 dB/+0.1 dB/–0.5 dB 10 Hz/20 kHz/100 kHzSource 68 kΩ, load 2 kΩ:. . . . . . .–0.1 dB/–0.7 dB/–5.5 dB 10 Hz/20 kHz/100 kHz Source 47 kΩ, load 2 kΩ: . . . . . . .–0.7 dB/–6.1 dB/–17.3 dB 10 Hz/20 kHz/100 kHzPhase response: . . . . . . . . . . . . . . .+1 degree / 10 Hz – 1.5 degree / 20 kHzImpedance: . . . . . . . . . . . . . . . . . .≥ 280 kΩ or ≥ 560 kΩ / 1 kHzCommon mode rejection: . . . . . . .20 Hz > 100 dB 1 kHz > 95 dB 20 kHz > 60 dB dielectric

strength: DC: 3.5 kV AC: 1.5 kV (limited by the ground lift switch)Dimensions (L x W x H): . . . . . . . .260 x 120 x 51 mmWeight:. . . . . . . . . . . . . . . . . . . . . .1.2 kg

The combination of a very high-impedance input and a high-class buffered valve stage takes care of delicate signal sources in a perfect way. So for instance the high-impedance input will prevent an overloading of the pickup output.The input has two bridged 6.3 mm jack sockets plus a 1:1 valve-buffered OUTPUT jack socket. At the

same time, a balanced and electrically isolated low-impedance signal is output at the rear XLR sockets via a Lundahl transformer. With the GAIN switch the gain factor is selected.A ground lift switch for the input section and a ground-on switch for the XLR output help to prevent ground loops.

DVM-120-DIH High-impedance Dual Direct Box – the specialist!

DVM 120 DIT Tube Direct Box – the flexible tool for sensitive sources

The two-channel unit serves to connect two loudspeaker pairs with one monitoring output – a typical studio situation. The switching of the line level signals before the active loudspeakers or power amplifiers is done in the balanced signal path using high-quality signal relays.

Three functions are operated via the remote control:1. MUTE on/off: Mute is automatically active after turn-on 2. Switching between loudspeaker pairs 1 and 23. Only left loudspeaker is active: Allows true mono listening

AC 100 – 240 V 15 VA mains supply input via IEC combi unit with illuminated switch and fuse insert.

Aluminium housing 260 x 120 x 51 mm, net weight approx. 1.1 kg.

Remote control in plastic housing, dimensions approx. 100 x 50 x 20 mm– device connection via CAT.5/CAT.6 standard patch cable.

DVM-120-SPR Remote Monitor Controller

Compared to the DVM-120-SPS it has an extra level control via an incremental encoder, which can be displayed and adjusted accurate to the dB with the supplied remote control.


NEW!


ACTI

VE C

OMPO

NENT

SACTIVE COMPONENTS

PRODUCT BENEFITS:• Perfect integration into the SYSBOXX system – hence connection technology and device in one framework• Super high-grade components for daily use in the commercial and conference sector• Intuitive, easy operational concept – very suitable also for untrained users• Ultracompact design ¼-19“ x 2 HU (W x H x D): 106.5 x 84 x 128 mm• Practical features

APPLICATIONS:• Commercial sector (assembly halls, churches, schools, restaurants etc.)• Conference technology to meet all requirements• Studio/live use

Compared with the 120 series, this is a ¼-19“ module (3 WU) for integration into the SYSBOXX housing system. Here our customers' and users' wishes were clearly paramount. For in the commercial sector it's not always easy to find the right devices for integration. Moreover, they should be easy and intuitive to operate – as specialists aren't always available for these tasks.

Another important aspect is the compact integration into furniture or racks as the connections aren't always in the right place. The combination of SYSBOXX standard components with the new DVM 194 series provides a previously unknown flexibility and clarity because device and cabling system can be combined in one unit.

Active system ACTIVE 19“ SYSBOXX SYSTEMS RANGE DVM194

DVM 194 MIX – The marvellous mini mixer

DVM 194 AMP Power Amplifier – the compact amplifier

The dual mix-bus design allows a high degree of flexibility. Thus every input signal can be mixed individually with the two mix buses.The two microphone inputs are fitted with switchable phantom power and a switchable high-pass filter (on the back via DIP switch – only to be set by “specialists”). A tone control is available on the front for quickly changing the sound. The inputs have Euroblock terminals (3.5 mm contact spacing). The double LED display per channel (–20/0 dB) provides an easy level control.The two stereo line inputs can be fed in on the rear via RCA sockets. Input 2 has a switched mini jack sockets on the front – ideal for connecting an MP3 player.

Spindle potentiometers are available on the back as gain controls for the microphone and line inputs. Above the level controls, the overall level is displayed for each mix bus via an 8-segment LED bargraph (–30, –24, –18, –12, –6, 0, +6, +12 dB). The output signals of mix bus A are fed to male 3-pole XLR sockets and those of mix bus B to Euroblock terminals. Power is provided by the appropriate 24 VDC, 4-pin XLR (15 VA) power supply DVM-194-PS.

This compact power package (2 x 75 W RMS @ 8 Ω) provides amplification of audio signals in conference, project or restaurant facilities. The completely passive cooling concept and the controls hidden from the end user makes it easy to install the amplifier in conference room furniture, under tables or other inaccessible locations. An IP network connection is provided for monitoring purposes. This allows different functions, such as power, temperature or stand-by to be remotely monitored and controlled. Ideal for all conference centres with acontrol room.On the input side each channel offers a Euroblock

input on the back, 2 switchable high-pass filters (60/100 Hz) plus a recessed level control. On the output side a Euroblock connector provides a safe connection of the loudspeakers. An add-on for 100 V ELA operation should be available by the summer of 2012.The combination with the DVM-194-PS2 power supply and the DVM 194 MIX mixer provides an ultra compact 19“ mixing & amplifier system with 2 HU and a depth of just 140 mm.

NEW!



ACTI

VE C

OMPO

NENT

S

ACTIVE COMPONENTS

DVM 194 HPA Phones Amp – The multi-purpose mini amplifier

DVM 194 DIS monitor with 3.5“ display

ORDER NO. DESCRIPTION DVM-194-MIX ¼ -19“ mixer module DVM-194-DIS ¼ -19“ display module, 3.5“ diagonal 720 x 480 px, incl. 12 VDC power supplyDVM-194-HPA ¼ -19“ headphone amplifier module DVM-194-AMP ¼ -19“ amplifier module DVM-194-PS1 System power supply for 194 series, 24 VDC —> 4-pin XLR, max. 3 devices DVM-194-PS2 Heavy-duty 6.5 A power supply for 194 series, 24 VDC —> 4-pin XLR, max. 3 devicesSYG12-02-02 Sysboxx housing frame 19“, 2 HU, 140 mm deep, for 4 194 modules

A dual-channel amplifier with rear XLR inputs, tone control and level control provides the basis for the main path. There is an additional auxiliary input (front or back) with an XLR/jack combi socket which can be mixed to the main signal using a dedicated control.The stereo switch is used to switch between stereo and mono modes. In stereo mode, the sub/pan control is used for setting the balance of the main signal. In mono mode, the Aux and Sub inputs are mixed with the main path via their own controls – which makes a compact three-channel mixer.Two headphone outputs are available via

6.3 mm jack sockets (front or back) – both with individual level controls. In addition, the signal can also be picked off balanced vmale XLR outputs (with ground lift switch).The inputs are electronically balanced and canbe switched from +4 dBu to –10 dBV nominal level.Power is provided by the appropriate 24 VDC, 4-pin XLR (15 VA) power supply DVM -194-PS.

This compact 3.5“ display with a resolution of 720 x 480 pixel is super practical for camera/video signal monitoring. The connection plate (1 WU = 1/12 x 19“), which can be front- or rear-mounted, has 2 FBAS inputs (BNC 75 Ω), which are switched from the front and can be controlled in brightness

and contrast (5 steps) via another push-button. The supplied 12 V power supply (250 mA) is connected at the bayonet connection on the input side and switched on and off via a red LED button on the front.


NEW!

PMV707


ACTI

VE C

OMPO

NENT

SACTIVE COMPONENTS

FEATURES:• All core functions are performed by a micro controller and can therefore be

controlled via custom-designed remote controls as well.• Balanced input amplifier with switchable phantom power and internally

switchable pad (–20 dB)• Gain setting from 0 to 66 dB (0–18 dB in 3 dB steps, from 19 dB in 1 dB steps)• Mute switch• Connectable phase reverse switch and switchable high-pass 12 dB/octave (cutoff

frequencies 50/80/125/150 Hz)• Switchable peak limiter with locally adjustable sidechain filter and release time

control as well as pre-adjustable attack, threshold and ratio plus adjustable function control LED display

• Level meter with 66 dB display range plus separately adjustable overload LED (signal source can be preset before or after limiter)

By the early 1980's, Bernhard “Rammy” Ramroth was already developing audio and studio technology. The initial focus was the use in live performances. Since the early 1990's, he has specialised more and more in studio and broadcast applications. At that point, he concentrated on several areas including active and passive signal distribution technology (like various splitter constructions for large-scale public service radio stations), headphone distribution systems (e.g. a number

of developments in the musical sector) as well as special concepts for monitoring purposes in studios (including several production studios).He is renowned in the industry for his obsession with detail and his extremely high quality standard – for example, he also invested in high voltage test equipment, torturing his broadcast components with up to 5,000 V.

Active systems OTZ 19“ BROADCAST RANGE

All inputs and outputs are provided through rear XLR connectors. The main and sub outputs are balanced floating via a transformer. The monitor output is electronically balanced. The “General Purpose” in/out offers 2 relay outputs and 2 optocoupler inputs for integration into the broadcasting studio environment. The remote is connected via standard Cat.5/Cat.6 patch cables (via EtherCon). It is also possible to connect more than one remote per channel. Power is supplied via IEC connectors and/or 4-pole XLR (24 VDC).

ORDER NO. DESCRIPTION PMV707 Remote controlled microphone preamp PMVREM Remote control for PMV707, 2-channel

TECHNICAL DATA:INPUT DATA:Input (per cable) . . . . . . . . . . . . . . . . . . . . . . . balanced, earthed Input impedance . . . . . . . . . . . . . . . . . . . . . . . ≥ 2.5 kΩInput level for nominal output level . . . . . . . . .–60 dBu – +6 dBu ditto, pad –20 dB active . . . . . . . . . . . . . . . . .–40 dBu – +26 dBuMax. input level . . . . . . . . . . . . . . . . . . . . . . . .+24 dBuMax. input level (pad –20 dB active). . . . . . .> +30 dBuLongitudinal conversion loss (V ≥ 24 dB) . . . .≥ 60 dB

OUTPUT DATA:Outputs Main/Sub (per channel) . . . . . . . . . .balanced, floatingTerminal resistance . . . . . . . . . . . . . . . . . . . . . ≥ 300 ΩOutput impedance (40 Hz to 6 kHz) . . . . . . .≤ 40 ΩLongitudinal conversion loss (IRT) . . . . . . . . . . ≥ 50 dB/20 kHzMonitor output (per channel) . . . . . . . . . . . . . electronic, balancedTerminal resistance . . . . . . . . . . . . . . . . . . . . . ≥ 600 ΩOutput impedance . . . . . . . . . . . . . . . . . . . . . . ≤ 100 ΩLongitudinal conversion loss (IEC). . . . . . . . . . ≥ 40 dB/20 kHzNominal output level . . . . . . . . . . . . . . . . . . . .max. output level +24 dBu

FREQUENCY RESPONSE: 20 Hz to 20 kHz (referred to 1 kHz) . . . . . . .±0.3 dB

DISTORTION (THD+N): . . . . . . . . . . . . . . . . . 40 Hz to 20 kHz, RL=300 Ω, PA +6/+22 dBu . . .≤ 0.03 % (bandwidth 80 kHz)

DIMENSIONS:Amplifier unit . . . . . . . . . . . . . . . . . . . . . . . . . . 483 x 44.4 x 260 mm (19“, 1 HU)Remote control unit . . . . . . . . . . . . . . . . . . . . . 483 x 43.8 x 60 mm (19“, 1 HU)

MAINS SUPPLY:Mains operation. . . . . . . . . . . . . . . . . . . . . . . . 100...250 VAC, 50/60 Hz, ca. 30 VADC operation . . . . . . . . . . . . . . . . . . . . . . . . . . 20...36 VDC, max. 30 W

The PMV707 is a special 2-channel microphone/line level pre-amplifier for the highest quality demands. It is used e.g. by radio stations. Owing to the separate remote control, the main unit can be installed in the equipment room.

PMV707 – THE Broadcast Microphone amplifier

PMVREM (Front)

PMVREM (Back)



ACTI

VE C

OMPO

NENT

S

ACTIVE COMPONENTS

The MSS804 with the configuration shown here is a fully modular and universal signal distribution system. Every input card is fitted with a special Lundahl transformer with 4 isolated outgoing lines. The gain can be individually controlled for each channel (–6 dB...60 dB via rotary switch). And the 4-segment level display shows the exact level (–40/–20/0/+20 dB). Moreover, each channel also has a phase reverse switch and a switch for the phantom power.The input circuit has been optimised for a high dynamic headroom with an wide frequency response and a very good signal-to-noise ratio.All inputs and outputs are connected to the bus board inside the split system – this allows a simple, customer-specific configuration of the rear connections. The configuration shown merely serves as an example.

The monitoring and distribution module gives you total control over your splittersystem. It has 2 different operating modes:

1.) Monitoring:This allows every channel to be listened/monitored via headphones and level meter. Furthermore, several splitter units can be cascaded. It is also possible to switch between adding and alternating modes.

2.) Distribution:Here, the split system can be used as a press box with up to 48 isolated outputs. It is also possible to combine the operating modes.

ORDER NO. DESCRIPTION MSS804 Microphone splitter, 10 channel

MSS804 – Microphone splitter and distribution system

TECHNICAL DATA:Max. input level . . . . . . . . . . . . . . .+29 dBuMax. output level . . . . . . . . . . . . . .+23 dBuFrequency response . . . . . . . . . . . .20 Hz to > 30 kHz ±1.0 dBDimensions . . . . . . . . . . . . . . . . . . .483 x 133 x 365 mm (19”, 3 HU)Weight . . . . . . . . . . . . . . . . . . . . . .approx. 9 kgPower supply . . . . . . . . . . . . . . . . . internal power supply 230 V 50/60 Hz (standard)


TIVE

COM

PONE

NTS

ACTIVE COMPONENTS

CARDINAL DVM Linear Amplifiers for Live Sound & Installation “Made in Germany“Series CARDINAL DVM-A: Linear, maintenance-friendly amplifiers for live sound with a performance of 2 x 340 W up to 2 x 950 W (on 4 Ω). A solid high endconcept that perfectly combines the advantages of analog audio amplifiers and the light weight of switching power supply systems. Series CARDINAL DVM-D: Digital high performance amplifiers – available upon request.Series CARDINAL DVM-E: Extremely dependable and maintenance-freeaudio amplifiers with a shallow installation depth (280 mm) for installation & ELA-technology 100 V.

There is a Brit in every German…at least when it comes to sound. While the CARDINAL is a German engineering product, it still sounds a little British, regardless of the required sound level: Spacey, fast, powerful, and extremely linear.

Each unit has been manually constructed at our plant, and each assembly is tested several times before it can be installed. Before a CARDINAL Series is introduced on the market it is tested continuously for up to 14 months. This is one of the reasons why the audio amplifiers in the CARDINAL Series are considered to be extremely dependable and the purchase is rewarded with a 5 Year Warranty.As far as the variety of models is concerned, we are very conservative. All products have a consistently timeless and unobtrusive design that is favored in thebusiness and across the borders. All product are designed to be very service-friendly and can be technically upgraded for years to come. And you will not be “attacked“ by a supposedly revolutionary novelty every 6 months.

CARDINAL DVM-A SeriesLinear, maintenance-friendly amplifiers for live sound with a performance of2 x 340 W to 2 x 950 W (on 4 Ω). A solid high end concept that perfectlycombines the advantages of analog amplifiers and the light weight of switchingpower supply systems.

Frequency range (0 dB ... –1 dB): 23 – 23,000 HzDistortion factor (at 1 kHz at 95 % nom. perf.): < 0.04 % Interference voltage clearance: > 105 dBDamping factor (internal 1 kHz): > 600 Environmental temperature: –5°...+45 °CProtective circuit: DC, overheating, short circuit,

HF-vibrationsDimensions W x H x D (without handles): 483 x 88.1 x 360 mm

ORDER NO. DESCRIPTION DVM-A0340 PA-amplifier 2 x 340 W RMS, 4 Ω, 2 U DVM-A0720 PA-amplifier 2 x 720 W RMS, 4 Ω, 2 U DVM-A0950 PA-amplifier 2 x 950 W RMS, 4 Ω, 2 U DVM-E4X040 ELA-amplifier 4 x 40 W, 100 V*, height 92 mm DVM-E2X100 ELA-amplifier 2 x 100 W, 100 V, 2 U; depth 290 mm DVM-E1X300 ELA-amplifier 1 x 300 W, 100 V, 2 U; depth 290 mm

*Combinations with 4 Ω and 100 V are available upon request.

CARDINAL DVM Amplifiers


DVM-E 2x100

DVM-E 1x300

DVM-E 4x040

DVM-A


ACTI

VE C

OMPO

NENT

S

ACTIVE COMPONENTS

Technical data DVM-A 0340 DVM-A 0720 DVM-A 0950Power at 8 Ω (RMS) 2 x 200 W 2 x 430 W 2 x 630 W

Power at 4 Ω (RMS) 2 x 340 W 2 x 720 W 2 x 950 WPower at 2 Ω (RMS) 2 x 440 W 2 x 1,060 W 2 x 1,410 W

Power brided at 4 Ω 1 x 975 W 1 x 2,110 W 1 x 2,820 W

Power input max. 1,750 W 2,530 W 3,090 W

Weight 12.8 kg 14.2 kg 15.5 kg

Other Amplifiers in the DVM-Assortment

Series CARDINAL DVM-EExtremely dependable and maintenance-free amplifierswith a shallow installation depth (290 mm) for installation & ELA-technology 100 V.

Technical data DVM-E4X040 DVM-E2X100 DVM-E1X300Power at 100 V: 4 x 40 W 2 x 100 W 1 x 300 W

Frequency range: 40 – 20,000 Hz 70 – 20,000 Hz 70 – 20,000 Hz

Distortion factor: < 0.06 % < 0.8 % < 0.8 %

Interference voltage clear.: > 91 dB > 95 dB > 95 dB

Input sensitivity: 1 V 775 mV/10 kΩ 775 mV/10 kΩ

Inputs: 2 x cinch per channel Phönix Phönix

Outputs: LS-clamps up to 4 mm² Phönix Phönix

Dimensions [W x H x D]: 483 x 92 x 290 mm 483 x 88 x 290 mm 483 x 88 x 290 mm

Weight: 12.0 kg 11.8 kg 11.8 kg



ACTI

VE C

OMPO

NENT

SACTIVE COMPONENTS

The DVM-SP0801 is equipped with a high quality 8“ high performance Neodymium-chassis and a 1“ compression driver on a turnable 90° x 60° horn.It is very suitable for music and language transmission in small and midsize rooms, as well as for midsize stage monitoring, and ensures optimum performance and audibility. The use of high quality materials and a modern casing make the DVM-SP0801 easy to transport and has also proven itself for tough everyday touring.The passive concept ensures that the DVM-SP0801 can handle any acoustic task without additional electronics. A very adequate, yet economical product.The integrated tripod flange, the M8 mounting holes, and the two monitoring angles of 40° or 50° make the system with numerous accessories extremely flexible and support the expectations placed on a universally applicable speaker system.

As a special feature the DVM08 is equipped with an additional SPEAKON-connecting panel on the bottom, enabling uncomplicated speaker connection even it tight places (e.g. on a stand or on stage).

As a standard the surface of the wooden casing has a high-tech plastic coating in black. A special finish in RAL-colors is available upon request (even for smaller quantities).The front of the speaker box is protected by a robust front grid with a honeycomb structure, backed with stainless steel webbing.

SOMMER CABLE also supplies the high quality speaker boxes made by CARDINAL DVM as a touring set. It includes 4 x DVM-SP0801, a touring case (truck dimension), 4 x transport straps incl. screws, 4 x steel, as well as 4 x SUPER-CLAMP with mini TV-pegs.

The transport strap can also be ordered separately, incl. steel and super-clamp.For planners and architects, a dimensioned drawing in a DXF-format can be called up under www.sommercable.com/cardinal.

PRODUCT ADVANTAGES:• Detailed sound rendition• Compact, light casing• Passive, separate 8“/1“ speaker system• Turnable 90° x 60° horn• Multi-function casing design• 2 monitor angle (40° or 50°)• No system controller required• 4 SPEAKON connections• 16 Ω system impedance• U-strap receptable for vertical and

horizontal straps• Various M8 and M10 mounting holes• Made in Germany

APPLICATIONS:• Speech transmission• Stage monitoring• Trade fair construction,

conference technology• Permanent installation• PA system, club

Further information and pictures can be found on our website www.sommercable.com/cardinal

TECHNICAL DATA:Casing: Very solid birch-multiplex casing with a mat black, scratch- and beat-resistant textured surface. 2 x Transport strap receptacles (M10) on the side, 4 x M8-mounting holes (top, bottom, 2 x rear) 1 x Tripod flange, 35 mmSpeaker: 1 x 8“ High performance Neodymium chassis 1 x 1“ Compression driver on turnable 90° x 60° hornCapacity: 200 W cont. program / 400 W peakNominal impedance: 16 Acoustic pressure: SPLmax 124 dB, 1 W / 1 mTransmission range: 68 – 18,000 HzAngle of reflected beam: 90° horizontal x 60° vertical (horn turnable)Connections: 4 x Speakon NL4 Pin1 1±Dimensions H x W x D: 425 x 250 x 232 mmWeight: 11.8 kgAccessories available: Flight case, pivoting handle

UNIVERSAL SPEAKER BOX CARDINAL DVM-SP0801

ORDER NO. DESCRIPTION DVM-SP0801-SW Box 8“, blackDVM-SP0801-WS Box 8“, white DVM-SP08FB-SW Transport strap, black DVM-SP08FB-WS Transport strap, white

Transport strap

Available in two colors. RAL-special finish upon request !

black

white

MECHANICS & ACCESSORIES

www.sommercable.com · [email protected] MECHANICS & ACCESSORIES

TABLE OF CONTENTS MECHANICS & ACCESSORIES

INSTALLATION/DATA/MULTIMEDIA COMPONENTS Adapter MP p PG29 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 419 Blank panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 419 One Hide Stand microphone stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 419

MULTIPAIR SYSTEM COMPONENTS Gooseneck adapter/LED lamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420 Varios 19“ rack shelves, drawers, platforms , service flaps . . . . . . . . . . . . . . . . . 420

MULTICORE SYSTEM COMPONENTS Overview of modular systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 421 19“ panels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 422 19“ panel housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 424 Stagebox empty housing Plug Mama MKII, 19“ series . . . . . . . . . . . . . . . . . . . 425 Stagebox empty housing THE BOXX MKIII . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 426 Cable drums including Schuko sockets, motorised drums SCHILL . . . . . . . . . . . . . 427 Side guider for SCHILL cable drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 427 SCHILL empty drums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 428 Cover plates, trolley for cable drums . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 429 Stackable cable drum . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431 Cable drums SOMMER CABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 431

CABLE ACCESSORIES Multicore case drum system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432 Mister Twister pro winder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 432 Mister Trolley unwinder/rewinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433 Rolling carts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433 Mister Guide cable guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 433 Cable shear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 434 Mister Meter cable length measuring device . . . . . . . . . . . . . . . . . . . . . . . . . . . 434 Mister Turner table-top unwinder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 434

STUDIO & STAGE EQUIPMENT/ACCESSORIES Protective bags for multipin connectors plug, splices, housings . . . . . . . . . . . . . . 435 Cable ducts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 435

INSTALLATION/ASSEMBLY ACCESSORIES Gaffa tapes, insulating tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 436 Repair tape . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 437 Insulating sleeves, shrink-on tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 437 Shrink-on tube sets, numbered/for individual printing . . . . . . . . . . . . . . . . . . . . . 438 Shrink-on tube in dispenser boxes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 438 Velcro tapes, cable binders, spiral hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 439 Braided hoses. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 440 Cable ducts for permanent installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 441 Brackets for flat screens and beamers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 442 Cleaning spray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 448

LED light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 449

TOOLS/MEASURING INSTRUMENTS Insulation stripping tools, installation tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 449 Ferrules, silver solder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 450 Crimping tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 451 Cable testers, audio generators, analyzers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 452

TOOLS/MEASURING INSTRUMENTSTOOLS/MEASURING INSTRUMENTS Insulation stripping tools, installation tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Cable testers, audio generators, analyzers . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . .


LB1D LB2D

LB1D1A LB1A

ONE-HIDE-STAND-2 ONE-HIDE-STAND-3

50

50

130/150

PG29


MEC

HANI

CS &

ACC

ESSO

RIES


Broadcasting / data / multimedia components EMPTY PANELS

Now you can even buy holes…shaped like punched empty blanks and made of robust VA steel. We offer four different models with universal D-holes and antenna sockets.There are many applications for these blanks: They can either be used as wall or table sockets, or for conferences.The holes are pre-punched and the paneling has an outside curvature of 4 mm.Dimensions: W x H x D (114 mm x 68 mm x 4 mm).

ORDER NO. VERSIONLB1D 1 x universal D-hole

LB2D 2 x universal D-hole

LB1D1A 1 x universal D-hole + antenna hole

LB1A 1 x antenna hole

Broadcasting / data / multimedia components Microphone stand ONE-HIDE-STAND

ORDER NO. DESCRIPTIONONE-HIDE-STAND-1 Microphone stand with a solid three-legged

construction/cable outlet on the bottom center

ONE-HIDE-STAND-2 Single stand with a heavy cast base/cable outlet on the side

ONE-HIDE-STAND-3 Single stand with a slim cast cast base/cable outlet on the side

Here is a ONE-HIDE-STAND without regrets!You know the problem: You want to adjust the microphone, but the cable balks and won’t follow? The ONE-HIDE-STAND, the microphone stand with a cable guide integrated in the stand, is a practical and elegant solution. The cable is completely hidden and does not interfere.And the microphone is not screwed in, as is commonly the case, but positioned directly on an innovative XLR-adapter with strain relief by Neutrik, omitting the unpractical microphone clamp. Thus, the height of the stand is also variably adjustable in one single step.The robust three-legged construction of the large microphone stand ONE-HIDE-STAND-1 ensures a high degree of stability. The ONE-HIDE-STAND-2 and the ONE-HIDE-STAND-3 both have a robust but slim cast base and an integrated rubber mat that dampens subsonic noises. The cable with Neutrik-XLR-plug exits on the side and on the ONE-HIDE-STAND-1 in the center. When the stand is extended the cable has a length of 5 meters.

APPLICATION:• For studio and gooseneck microphones• For events in churches, town halls, and conference centers

PRODUCT ADVANTAGES:• Microphone attachment via XLR-connection with integrated strain relief• Internal cable guide• Height variable – fixation in one single step• Clean, orderly presentations

A document stand, the ONE-HIDE-SHELF, is also available. It is made of Plexiglass and has a DIN A5- document shelf and a script compartment. It is installed and fixed in place with two manual adjusting screws – an ideal addition to the ONE-HIDE-STAND-1.

ORDER NO. SUITABLE FORONE-HIDE-SHELF DIN A5

ONE-HIDE-STAND-1 with ONE-HIDE-SHELF

Multipin adapters on PG are often required for rear rack wiring. Here a multipin housing CHI 16/CHI 24 on 1 x PG29 can be wired very nicely.Size 50 x 50 x 150 mm

ORDER NO. W x H x D [mm] MP16-PG29 124 x 50 x 50 MP24-PG29 150 x 50 x 50

Broadcasting / data / multimedia components MULTIPIN ADAPTER p PG29

Threading M4


RSL

RSB

RSKRSK

1

2

3


MEC

HANI

CS &

ACC

ESSO

RIES


There are a lot of great rack inserts available on the market for your DVD player, effect unit, or expander. But there is a well known problem: the units are often so light that they slide back and forth during operation!Now there is a 19“ rack insert made by SOMMER CABLE with a track, universally adjustable on the side and also the height, this will keep your unit from sliding. Gives safe storage for units measuring less than 43 cm. The rack insert VARIOS REF19, in a typical SOMMER CABLE charcoal grey, is made of twist-proof 1.5 mm thick steel panel and will support units with a weight of more than 15 kg.As a simpler version we offer a 19“ rack drawer.And a high quality rack drawer with various features:Continuous front grip rail, lock with 2 keys, high quality workmanship.A 2 U foam block is available as an accessory.The service fl aps are made of solid metal and high quality workmanship.

Multipair system components VARIOS 19“ RACK INSERTS/RACK DRAWERS/DRAWERS/SERVICE FLAPS

ORDER NO. DESCRIPTION DIMENSIONS REF19-2U Rack insert 2 HU, 295 mm deep

REF19-3U Rack insert 3 HU, 295 mm deep

REF19-4U Rack insert 4 HU, 295 mm deep

RSB19-1U Rack drawer 1 HU




RSL19-2U Drawer 2 HU, 365 mm deep inside, 368 mm deep outside




RSL-SCH Foam block for drawer 2 HU RSL-6MI Micro-insert for 6 HU drawer with 25 microphones

RSK-U Service flap, metal 4 HU, 160 mm

RSK-6U Service flap, metal 6 HU, 19“

REF19(adjustable)

Multipair system components GOOSENECK LAMP

Like a nosy gosling…these little helpers are bound to crane. The flexibly adjustable gooseneck with 3- or 4-pole XLR connection is available both as an adapter version for microphones and with 4 mini LEDs as a light source for audio mixing desks and racks.

ORDER NO. DESCRIPTION LENGTH1 GNL380-XLR Gooseneck LED lamp (12 V) with

XLR 3-pole male connection38 – 39 cm

2 GNL380-XLR-90 Gooseneck LED lamp (12 V)with angled XLR 3-pole male connection

38 – 39 cm

GNL380-XLR-4P Gooseneck LED lamp (12 V) with XLR 4-pole male connection

38 – 39 cm

3 GNM280-XLR Gooseneck extension, XLR 3-pole male – XLR 3-pole female

28 cm

NEW!



MEC

HANI

CS &

ACC

ESSO

RIES


Multicore system components MODULAR SYSTEMS

Regardless of where you are at home – event or media technologies, the installation sector or A/V broadcasting – our modular SYStems fulfils all of your expectations with a flexibility that allows adaptation and changes for compliance with the latest market standards.

Modular tems by SOMMER CABLE

Detailed information and

overview charts are available

in Chapter “Modular Systems“.

The SYSBOXX can be configured as a 19“ system or a floor or wall box of variable width and height, and it can also be equipped with 2 or 3 HU front panels. An additional installation level in the centre of the casing allows many different configurations. It is in compliance with DIN 41494.

Table tank SYSDESK has a robust power-coated full metal casing and can be equipped with 2 HU front panels and modules up to a max. of 9 DU (accord. to DIN 41494 this amounts to 63 DU). Cable strain relief and dust protection are included.

The floor tank insert SYSFLOOR is available in 2 sizes at either 4 or 6 WU, with optional installation of 2 HU front panels, compatible with the Ackermann-floor tank round and square.

The SYSWALL-system is for installation of all network, control, multimedia and A/V-connections to mounting sockets, wall channels or switch systems as well as all SYS-module systems.

PRODUCT ADVANTAGES:• Time savings due to short installation and

configuration times

• Easy to assembly with pre-cut threading and simple inside wiring with flat belt cables

• Fine optics with counter-sunk screw heads and an attractive dark grey finish

• Clean and individual labeling options

• Clearly structured – with only 6 different front panel widths

• Absolutely modular (front, rear, side)

• Compact construction (2 HU base – even for LK150-pin)

• High stability with 2.5 mm panel thickness

• Perfect user support with web-configurator under www.sysboxx.com

• 5 Year Functional Warranty

• Absolute compatibility with DIN 41494 Parts 1, 2 and 5 for integration of components commonly available on the market (Ghielmetti, MHN, Kramer etc.). 7 DU (depth units) correspond to 1 WU (width unit) on the SYSBOXX MKII. 19“ = 84 DU = 12 WU

• Additional assembly level in 140 mm deep casing – ideal for installation of transmitters, electronic components, top hat rail adaptation etc.

• Optimised EMC-safety

• RoHS-Conformity

The wall installation casing – suitable for all SYSBOXX-components – with a 100 mm recessed installation level where plug connectors can stay connected even if the door is closed.



MEC

HANI

CS &

ACC

ESSO

RIES


a “piece of steel with holes in it”, but an important utensil for rack wiring in media technology and stage work. These panels should not just provide a decent cladding and an indestructible coating, but must also be constructed so they won’t give way or collapse when exposed to heavy strain and pressure.The front panels are made of black (PBS series...) or charcoal grey (PBA series...) powder-coated 1.2 mm or 2 mm sheet steel (depending on version). A U-profile on the top and bottom edges provides higher rigidity.

The optional strain relief clamp (order number ZEPB) can be used to reduce pressure on the cables on the back. For labelling we recommend our writable

magnetic strip (order number ZSPB) or number strip (order number NSPB...).The broadcast series (PBQ...) is new to our product line. It is made of 4 mm anodised aluminium sheeting, reinforced by a rear stainless steel bracket. The connectors are all fitted from behind (the panels have been milled off from behind for this). The SYSBOXX SYPS-03-MK2 labelling profile can be used for labelling.Of course, we can also produce custom models. Please contact us by fax or e-mail ([email protected]) with details of your project.

Multicore system components 19“ PANELS

A 19” panel is not just...

Blank rack panelEmpty panel for covering, filling out or DIY assembly

ORDER NO.PANEL THICKNESS COLOUR HEIGHT

WEIGHT [kg]

PBS0-L 1.2 mm, steel black 0.5 HU 0.250

PBS1-L 1.2 mm, steel black 1 HU 0.500





WEIGHT [kg]

PBA1-L-SOM 2.0 mm steel charcoal grey 1 HU 0.500+ SOMMER CABLE logo

Rack panel, with brushes for cable inletWith integrated strain relief


WEIGHT [kg]

PBS1-KB1 1.2 mm, steel black 1 HU 0.335

Rack panel, with brushes for cable inletFor retrofit, strain relief possible with ZEPB


WEIGHT [kg]

PBS1-KA1 1.2 mm, steel black 1 HU 0.335

Rack panel, for ventilationVentilation panel with air vents, with ventilation slots


WEIGHT [kg]

PBS1-A 1.2 mm, steel black 1 HU 0.160




Rack panel, for ventilation and with fan spacesVentilation panel with air vents, see illustration

ORDER NO. VERSIONPANEL THICKNESS COLOUR HEIGHT

WEIGHT [kg]

PBS3-A1 1 fan 1.2 mm, steel black 3 HU 0.660

PBS3-A2 2 fans 1.2 mm, steel black 3 HU 0.540

PBS3-A3 3 fans 1.2 mm, steel black 3 HU 0.420

Rack panel, universal D seriesfor XLR, jack plug, Speakon NL4MP, BNC etc.


WEIGHT [kg]

PBS1-D08 8-hole 1.2 mm, steel black 1 HU 0.300




PBS2-D24 24-hol 1.2 mm, steel black 2 HU 0.200



Quality

Quality


MEC

HANI

CS &

ACC

ESSO

RIES



WEIGHT [kg]

PBA1-B16 16-hole 2.0 mm, steel charcoal grey 1 HU 0.300

Rack panel, with BNC holes With 16/32 or 10/20 holes for screwable standard BNC sockets, which are secured on the back with a lock nut.


WEIGHT [kg]

PBS1-B16 16-hole 1.2 mm, steel black 1 HU 0.300

PBS2-B32 32-hole 1.2 mm, steel black 2 HU 0.600

Rack panel, with multipin die-cut With die-cuts for multipin connectors from Harting, Ilme etc., without an adapter panel the PBS2-MP version can be fittted with CHI 16 or CHI 24; the PBS3-MP16 version with CHI 16, the PBS4-MP panels have die-cuts for CHI 24.


WEIGHT [kg]

PBS2-MP 2 die-cuts 1.2 mm, steel black 2 HU 0.600

PBS3-MP16 6 die-cuts (CHI16)

1.2 mm, steel black 3 HU 0.840

PBS4-MP 6 die-cuts (CHI24)

1.2 mm, steel black 4 HU 0.950


WEIGHT [kg]

PBA1-D06 6-hole 2.0 mm, steel charcoal grey 1 HU 0.320




CORNER VERSION 30° angled


WEIGHT [kg]

PBA1-DA08 8-hole 2.0 mm, steel charcoal grey 1 HU 0.300

PBA1-DA12 12-hole 2.0 mm, steel charcoal grey 1 HU 0.140


WEIGHT [kg]

PBQ1-D06 6-hole 4.0 mm aluminum

anodised charcoal grey

1 HU 0.320



1 HU 0.300



1 HU 0.140



1 HU 0.130


WEIGHT [kg]

PBQ1-B10 10-hole, including ZEPB lacing bar

4.0 mm aluminum


1 HU 0.300

PBQ1-B20 20-hole, including ZEPB lacing bar

4.0 mm aluminum


1 HU 0.300

ORDER NO. DESCRIPTIONM12-CAP-7016 Plastic cap for BNC holes, M12, colour: RAL7016



MEC

HANI

CS &

ACC

ESSO

RIES


Multicore system components PANEL CASINGS

PANEL CASING 19“for do-it-youself assembly, 19“ panels up to 4 HU

ORDER NO. VERSION W x H x D [mm]

G1900 Empty / 4 HU output MP,incl. adapter panel on PG21

483 x 180 x 60

19“ INSTALLATION SETS

ORDER NO. CONTENTSS-RACKSCREW 4 rack screws with 4 torsion-proof washers

S-RACKNUT-1 4 crown nuts for rack profile with clamping spring

S-RACKNUT-2 4 square tab nuts for simple rack profile

S-RACKNUT-3 4 captive nuts for 1.5 mm steel track of rack (suitable for G1900)

S-RACKNUT-4 4 captive nuts for 3.0 mm aluminum track on rack

Magnetic labelling stripsuitable for the PBS and PBA series

ORDER NO. ZSPB

Number strips

ORDER NO. VERSIONNSPB Numbering 1 – 32

Universal labelling strips with 443 mm adhesive surface for DIY fitting with paper strips Height 9 mm. Overall height including carrier is 11 mm.

ORDER NO. HEIGHT P19-BS09 9 mm

Lacing bar

ORDER NO.ZEPB

Labelling profile suitable for the PBQ series for labelling strips of 6 mm height, L= 106.5 mm = 21 sub units in accordance with DIN

ORDER NO. SYPS-12-MK2 4 pcs. set

Rack panel, with SUB holes


WEIGHT [kg]

PBA1-S098 8 x SUB-D09/15 HD

2.0 mm, steel charcoal grey

1 HU 0.300

PBA1-S258 8 x SUB-25 2.0 mm, steel charcoal grey

1 HU 0.300


Rainer Blanck

1 2 3


MEC

HANI

CS &

ACC

ESSO

RIES


THE 19“ SERIES

An extremely robust ...and compact stagebox in a modern, well thought out panel design. Each box has punched holes for universal XLR connectors (e.g. NEUTRIK D- series), as well as SOMMER CABLE universal multipin holes for 16- and 24-pin rectangular and LK37-pin round connectors wih the optional adapter plate AP-24-LK37. Many other adapters can be installed on the adapter panels shown on the following pages.

APPLICATION:• Stage and live stagebox• Sub-distribution for keyboard or drums• Fixed installation• Floor and wall installation

PRODUCT ADVANTAGES:• Compact and suitable for muliple set-up with a modern and ergonomic

panel design• No tripping over the connecting cable with the outlet located on the side• Better overview even in bad lighting, because inputs are clearly separated

from outputs• Enormously scratch-resistent with special double lacquered coating• Large and clear numbering on in- and outputs

PLUG MAMA, empty casing ORDER NO. VERSION H x W x D [mm] 900-0106 12 in / 4 out 145 x 145 x 308 900-0126 24 in / 8 out 145 x 263 x 308 AP-4D-B Blank cover with 4 punched holes PLUG MAMA PM-LITE Lighting set with 9 V compartment, LED green and switch for PLUG MAMA MK II

19“ SERIES, empty casing ORDER NO. VERSION W x H x D BB1924N 24 holes/1 x multipin panel hole 19“ x 4 HU x 94 mmBB1932N 32 holes/1 x multipin panel hole 19“ x 5 HU x 94 mmBB1940N 40 holes/1 x multipin panel hole 19“ x 6 HU x 94 mmBB1948N 48 holes/2 x multipin panel holes 19“ x 8 HU x 94 mm

Now available with 48 x XLR, 4 x multipin rectangular or 4 x LK punched holes, 85 – 150-pin Attention! Also order adapter panels!

Go ahead, step on me, I can take it !Luxurious and nearly indestructible 19“ stagebox for studio and live application as well as permanent installation. The punched holes are intended for universal XLR plug connectors (e.g. NEUTRIK D-series) and imprinted with large numbers. The 19“ flange on the side is removable for floor and wall installation. The front of the unit has 1 or 2 multipin panel holes for up to 2 adapter panels (BB1948 only). Screws and rubber feet are included in the delivery.

Multicore system components stagebox empty casings PLUG MAMA MK II

Our Series...PLUG MAMA MKII, THE BOXX MKII and SYSBOXX are created in the same attractive SOMMER-design.

*) We equipped them with universal multipin holes for installation of all common rectangular multipins as well as a 24-, 25- or 37-pin LK or a PG29-output.

Adapter panel for BB-series – please include in the order ORDER NO. DESCRIPTION PICTURE BB-AP-LB Blank cover 1 BB-AP-2LK Adapter panel for 2 x LK85/150 2 BB-AP-2MP Adapter panel with 2 universal-multipins* 3 S-G3,0X10S-TS Screw set, 25 pcs. for BB-AP

For suitable XLR-modules with clamping connection for fast onsite installation, see Chapter “Multicore- and Distribution Systems“.


AP-24-10/06 AP-24-PG29 AP-24-LK37

TORX-SET-SBB TORX-SET-SBS


MEC

HANI

CS &

ACC

ESSO

RIES


A lot for your money...that is what you will get when you buy our well priced floor stagebox THE BOXX. It is made of powder-coated steel paneling of the highest quality, has a practical stage design with a handle.The universal D-holes are suitable for all plug connectors with common D- flange casing. The 2-part casing is solidly assembled with M3 counter-sunk screws (Torx), which also hold the 4 rubber feet in place. At the side of the casing towards the back is a treaded multipin punched hole. It can hold 16- and 24-pin rectangular multipin connectors, or alternately, wih optional adapter plate AP-24-LK37, a 37-pin round plug connector.Many other multipin connectors can be attached to the casing using the adapter panels listed below.

Multicore system components stagebox emtpy casings THE BOXX – MKIII

APPLICATION:• Stage and live stagebox• Sub-distributor box• Fixed installation

PRODUCT ADVANTAGES:• Excellent quality for the price• Comfortable and precise casing assembly possible• Optional connection of various mulitpin connectors

Universal multipin adapter panel – also suitable for THE BOXX, PLUG MAMA MK II, and the 19“-seriesHoles flush, multipin hole with M4 threading, 4 x M4 x 10 counter-sunk screws Torx included in delivery.ORDER NO. DESCRIPTION AP-24-B Blank cover for MP24 AP-24-10/06 Adapter panel MP24 p MP10/6 AP-24-PG29 Adapter panel MP24 p PG29 (for PG21 use RZG29-21) AP-24-LK24 Adapter panel MP24 p CIRLK24 and CIRLK25 AP-24-LK37 Adapter panel MP24 p CIRLK37 AP-24-SIEM30 Adapter panel MP24 p Siemens type male/female, 30-pin

THE BOXX Empty casingORDER NO. DESCRIPTION W x H x D [mm] TBH08-MK3 THE BOXX 8 x hole D-type / output multipin 16/24/37 universal 195 x 211 x 80 TBH12-MK3 THE BOXX 12 x hole D-type / output multipin 16/24/37 universal 195 x 261 x 80 TBH16-MK3 THE BOXX 16 x hole D-type / output multipin 16/24/37 universal 195 x 311 x 80 TBH24-MK3 THE BOXX 24 x hole D-type / output multipin 16/24/37 universal 195 x 411 x 80 TBH32-MK3 THE BOXX 32 x hole D-type / output multipin 16/24/37 universal 195 x 511 x 80

Torx bit and pin wrench sets for installation of THE BOXX and SYSBOXXORDER NO. CONTENTS TORX-SET-SBB Torx set bits: 6, 8, 10, 20 TORX-SET-SBS Torx set pin wrenches: 6, 8, 10, 20

We have decreased the distance between the XLR-holes on the new THE BOXX MKIII Series to allow simple and speedy pre-installation of our INSTA-modules (see Chapter “Multicore- & Distribution Systems“).

TBH12 with AP-24-PG29

Standard opening for 16- and 24-pin multipin connectors


GT310.MD4 IT266.MD3


MEC

HANI

CS &

ACC

ESSO

RIES


SIDE GUIDER FOR CABLE DRUM

Round and round we go...The SIDEGUIDER can be installed on the SCHILL cable drum GT310 quickly and easily. It guides the cable from left to right during winding, distributing it evenly onto the drum. So the cable no longer has to be guided manually and one hand is free to e.g. hold on to the drum.So you can, for example, walk up to the plugged cable with drum in hand and simultaneously wind the cable onto the drum using the SIDEGUIDERS.This is practical and saves time. Simply ideal for radio, TV and live sound.

A demo video is available for viewing under www.sommercable.com/videos.

ORDER NO. DESCRIPTION SIDEGUIDER1 Side guider for SCHILL-cable drum GT310 for cables with a diameter of max. 18 mm

CABLE DRUMS INCL. SCHUKO-SOCKETS

ORDER NO. DESCRIPTION GT310.MD4 Special rubber cable drum with 4 Schuko-sockets IT266.MD3 Plastic cable drum with 3 Schuko-sockets

Prewired cable drums incl. power cable are available in Chapter “Multicore- and Distribution Systems“.

Rope-driven and motorized drums in different sizes are available upon request. Special configurations are also possible!

Enter the cable type of your favorite multipair

or video cable made by SOMMER CABLE,

select the number of wires or wire pairs and

the desired cable length. You will then be able

to view all suitable cable drums in our product

selection.

Our practical cable drum volume calculator

is available under http://sommercable.com/drumcalculator/

SOMMER CABLE is one of SCHILL‘s largest customers and has a large product inventory. This makes us a favoured German contact address when it comes to fast product availability or professional cable equipment. Our technicians install audio, video, load and network cables on SCHILL drums (e.g. our portable CARDINAL drum with network switches). Please direct your request for SCHILL cable drums or special orders directly to [email protected]

Since 2007 SOMMER CABLE has been the official and exclusive distributor for SCHILL products in France. Most power sockets on SCHILL cable drums are also available in a French version.

The SCHILL GmbH & Co. KG, located in Swabian Fellbach, is the market leader in producing high quality cable drums for broadcasting, radio, live sound and electronic technologies as well as equipment for manufacturing sites and industries. Swabians like the Schill gentlemen (see photograph) are not only resourceful inventors and tinkerers, but they are also very finicky. Therefore, cable drums made by SCHILL stand for absolute quality. SCHILL cable drums are simply not comparable with some of the rickety drums available for the hobby sector – at an astonishingly small difference in price. Considering the quality, SCHILL drums are quite reasonably priced due to a very well organised serial production.

You need a cable drum?

No problem, we have all SCHILL-products readily available !

Just give us a call: +49 (0) 7082 / 4 91 33 - 0 NEW!


GT310

SK48

SK46

GT450

FS450FS450GT380

GT235


MEC

HANI

CS &

ACC

ESSO

RIES


Roll over Beethoven...or anyone else for that matter. These are the official cable drums for musicians, soundmen, and broadcasting technicians. The handle is so constructed that there is plenty of room between you and the drum, therefore your legs will never get hit. These drums are resistant to chemicals, gasoline, and oil. All drums are equipped with a brake. They have a large winding core, a cable infeed resistent to bending, and an effective strain relief for sensible cable handling. Models GT310 and GT450 have a drum made of almost indestructible black solid rubber. It is especially recommended for everyday use on stage.

You can download dimensioned drawings from our homepage www.sommercable.com. Here you can also find our cable length configurator to help you find out which drum is suitable for your cable length.

The drums are empty, i.e. they are delivered without cable and cover. We have the complete SCHILL-assortment in stock – just ask us!

Rolling chart for SK-series (for special accessories refer to the next page)

Dimension and cable pick-up chart (cable length configurator – refer to www.sommercable.com)

Multicore system components EMPTY DRUMS by SCHILL

HT582 with KOMB.RM (order separately)

HT480 with KOMB.RM (order separately)

HT300K with KOMB.RM (order separately)

Driving rack for HT- and GT-series – refer to next page

ORDER NO. GT235 GT310 GT380 GT450 HT300K HT380 HT381 HT480 HT481 HT482 HT582 SK4600.RM SK4601.RM SK4602.RM SK4822Outer-Ø [mm] 235 310 380 445 300 380 380 460 460 460 580 460 460 460 460Core-Ø [mm] 135 170 236 296 178 178 240 178 240 320 320 280 280 280 320Wind. width [mm] 110 132 182 187 142 142 170 142 170 170 170 250 350 500 336Wind. length/max. [m]Ø 7.0 mm 60 135 249 301 120 243 232 400 392 292 609 487 696 988 585Ø 8.0 mm 45 96 190 240 89 177 162 289 297 204 473 395 548 791 409Ø 9.0 mm 34 73 153 185 67 143 122 225 235 153 355 313 440 638 315Ø 11.0 mm 23 54 92 118 45 93 87 144 163 109 232 204 287 417 219Ø 12.0 mm 20 41 86 104 41 76 67 121 137 85 197 162 235 332 170Ø 13.0 mm 13 37 67 81 30 60 63 100 113 79 183 132 180 264 152Ø 14.0 mm 12 33 62 75 30 60 58 100 91 73 152 118 174 243 146Ø 15.0 mm 12 24 46 55 27 46 42 81 83 53 124 111 160 229 107Ø 17.0 mm 6 21 38 51 18 34 38 64 65 48 98 81 116 168 92Ø 20.0 mm 5 13 25 31 15 30 23 49 43 29 67 55 78 116 58Ø 23.0 mm 4 11 20 27 9 20 20 36 30 25 49 34 52 73 51Ø 25.0 mm 4 7 13 16 7 17 11 25 26 14 42 34 48 69 31Ø 27.0 mm 2 6 11 13 7 13 11 25 26 14 33 31 41 62 29Ø 30.0 mm 1 6 11 13 6 10 9 16 16 12 28 27 38 55 26


RUND-FL

RUND01 RUND04 RUND08 RUND12

RUND16 RUND24 RUND32 RUND40

RUND0204 RUND0208

RUND-LK85 RUND-MP2 RUND-AP380RUND-APRUND-SYS08RUND-SYS04

1 2 3 4

5 6 7 8 9 10 11 12

13 14 15 16 17 18 19 20

21 22 23 24 25 26 27 28

29 30 31 32 33 34 35 36

37 38 39 40

1 2 3 4 5 6 7 8

9 10 11 12 13 14 15 16

17 18 19 20 21 22 23 24


MEC

HANI

CS &

ACC

ESSO

RIES


Multicore system components COVER PANELS, TRANSPORT DEVICES

ORDER NO. DESCRIPTION RUND01 Front panel with 1 D-hole (XLR, etc.) Suitable for GT310-, HT- and SK-model RUND0204 Front panel with 2 Schuko- or CEE3-blue holes + 4 D-holes (XLR, etc.) Suitable for GT310-, HT- and SK-model RUND0208 Front panel with 2 Schuko- + 8 x A/B holes (XLR A-Series) Suitable for GT310-, HT- and SK-model RUND04 Front panel with 4 D-holes (XLR, etc.) Suitable for GT310-, HT- with core-Ø 240 and SK-model RUND08 Front panel with 8 D-holes (XLR, etc.) Suitable for GT310-, HT- and SK-model RUND12 Front panel with 12 D-holes (XLR, etc.) Suitable for GT310-, HT- and SK-modelRUND-LK85 Front panel with 1 LK-hole for LK85, LK150 Suitable for GT310-, HT- and SK-model RUND-MP01 Front panel with SOMMER universal multipin hole *(not shown) Suitable for GT310-, HT- and SK-model RUND-MP02 Front panel with 2 x SOMMER universal multipin hole * Suitable for GT310-, HT- and SK-model RUND-SYS04 Front panel with attachment for 4 WU SYSBOXX Front panels Suitable for GT310- and HT-model RUND-SYS08 Front panel with attachment for 2 x 4 WU SYSBOXX Front panels Suitable for GT450- and SD-model RUND-AP Front panel with attachment for small round panels RUND0204, RUND-MP etc. Suitable for GT450, SD050 and SD060 RUND-AP380 Front panel with attachment for small round panels RUND0204, RUND-MP etc. Suitable for GT380 RUND16 Front panel with 16 D-holes (XLR, etc.) Suitable for GT450, SD050 and SD060RUND24 Front panel with 24 D-holes (XLR etc.) Suitable for GT450-, SD050 and SD060 RUND32 Front panel with 32 D-holes (XLR, etc.) Suitable for GT450, SD050 and SD060 RUND40 Front panel with 40 D-holes (XLR, etc.) Suitable for GT450, SD050 and SD060RUND-FL Spacer flange for stagebox drum installation Suitable for SD046- and HT-model

* Suitable adapter plates for PG29, LK37 and Siemens type male are available under “THE BOXX Accessories“

Time to hit the drums...with the SOMMER CABLE cover panels in charcoal grey coated 2 mm -sheet steel.As multipin die-cut for RUND-MP01 and RUND-MP02 models, we use our multifunctional punching like with THE BOXX MK II and the PLUG MAMA MK II.Owing to the pre-cut M4 threads the installation is particularly quick and easy. Matching adapter panels (e.g. to LK37, Siemens etc.) can be found a couple ofpages forward under “Adapter panels THE BOXX”.

In addition to the Schuko sockets the blue 3-pole CEE socket (Mennekes) can also be installed on the RUND0204 panel (using pre-cut M4 threads). The large round panels RUND16 to RUND40 can be mounted directly on the drum using the RUND-FL (6 holes with a pitch circle diameter of 27.5 cm must be drilled into the drum).

NEW!

NEW!

NEW!NEW!


KOMB.SO

KOMB.RM

KOMB.MD4

KOMB.RM-ALU

KOMB.450.RM

KOMB.380.MFK

SK48

FS450FS450


MEC

HANI

CS &

ACC

ESSO

RIES


ORDER NO. DESCRIPTION KOMB.SO Blank cover, plastic Suitable for GT310-, HT- and SK-model KOMB.380.SO Blank cover, plastic Suitable for GT380-model KOMB.450.SO Blank cover, plastic Suitable for GT450-, SD050 and SD060 KOMB.450.RM Winding attachment, for cable splice Suitable for GT450-model KOMB.RM Winding attachment, for cable splice Suitable for GT310-, HT- and SK-model KOMB.RM-ALU Winding attachment, metal Suitable for GT310-, HT- and SK-model KOMB.310.MFK Cover with lockable door Suitable for GT310-, HT-model and SK 302 KOMB.380.MFK Cover with lockable door Suitable for GT380 and SK 380 KOMB.450.MFK Cover with lockable door Suitable for GT450 and SK450 KOMB.MD4 Front panel with 4 Schuko sockets Suitable for GT310-, HT- and SK-model TW4600 Trolley for drum SK4600 Solid rubber wheels TW4601 Trolley for drum SK4601 Solid rubber wheels TW4602 Trolley for drum SK4602 Solid rubber wheels FS450 Rolling cart for drum GT450 With height-adjustable steel pipe handle (see picture on pervious pages) FST480 Rolling cart for drums HT480, HT481, HT482, HT582 * Suitable adapter plates for PG29, LK37 and Siemens type male connector are available under “THE BOXX Accessories“

Multipair system components “BROADCAST”-EMPTY DRUM SCHILL INCL. PROTECTIVE COVER

Close the door...The stackable and roadproof cable drum SL500 was specially developed for applications in professional broadcasting. It has four reinforced castor sockets and is therefore particularly qualified for robust use. Furthermore, the drum is equipped with a cover with a lockable door, which protects the

connectors and keeps them easily accessible. An integral, adjustable brake prevents it from rolling away. The fixed, folding handles and a solid crank bracket are also practical.

CABLE MAX. LENGTHØ 3 mm 3,450 mØ 7 mm 625 mØ 15 mm 124 m

Winding width:

ORDER NO.SL500

Temperature range: –40° to 130°CExternal Ø: 450 mmCore Ø: 250 mmWinding width: 290 mm

Trolley TW for SK Series

NEW!NEW!

NEW!


SD045-350


MEC

HANI

CS &

ACC

ESSO

RIES


are gaining popularity, then with this roller despite the length of a cable, it can be transported just about everywhere.These stackable cable drums are very reasonably priced. They are made of black 20 mm thick steel piping and are mostly used to wind up heavy multipairs.

Each drum has a retractable handle and a compartment for cable end pieces and splices. The floor piping on all drums is pre-drilled for installation of all solid rubber rollers commonly available on the market.

Cable intake chart, max. length in metersDIAMETER SD045-350 SD045-44012 mm 259 34516 mm 132 18120 mm 93 12424 mm 64 8628 mm 41 5830 mm 41 5532 mm 28 38

Weight 16 kg 17.5 kgDimensions in mm 530 x 450 x 480 680 x 450 x 480

The tough rollers...

Multicore system components cable drums + equipment CABLE DRUMS, STACKABLE

SOMMER CABLE CABLE DRUM, SOLID METAL

Without wheels you will just have to walk...but moving is easier when the drum is on wheels. This drum can be put to use wherever heavy multipairs with excessive length must be transported fast and safely. The drum is available with our pre-punched XLR front panel ”RUND16/32 and 40”.

PRODUCT ADVANTAGES:• Easy to move with a height-adjustable handle and large solid rubber wheels• Clean and smooth run due to double suspension• Even unwinding and fixing possible with variable brake• Extremely long life with steel pipe rack and retractable handle

APPLICATION:• For transmission vehicles and construction sites• Convertible for use as a stagebox

Cable pick-up chartMAX. LENGTH SD 050 SD 060Cable-Ø 10 mm 250 m 440 mCable-Ø 15 mm 106 m 180 mCable-Ø 17 mm 76 m 137 mCable-Ø 22 mm 50 m 85 mOuter dim. [WxHxD] 560 x 500 x 340 mm 680 x 600 x 340 mmDimensions:A 500 mm 600 mmB 315 mm 315 mmC 220 mm 220 mmD 302 mm 302 mm

Multipair system components CABLE DRUMS by SOMMER CABLE

full metal

folding grip

slidingbearing

vario-brake D

rollers

variable carrying handle

C

AB


BA

by

A BB

by

1 2


MEC

HANI

CS &

ACC

ESSO

RIES


The magic box...It really reminds you of the magicians act when you pull out and rewind the heavy multicore cable. Thick cables are not only heavy, but often they are also very stubborn to handle. For long cable lengths two people may be needed.No problem for MISTER-WHEELER: Like a carrousel the plastic ring drum turns inside the case, and the cable can be pulled out across a detection roller, easy as pie (L x W x H: 75 x 75 x 40 cm). (Fig. A) Finished with the cable – then simply push it back into the drum. (Fig. B)The ring drum will turn and the cable gently slides back into the case. Close the lid... that‘s it.A channel hole to the inner core makes it possible to insert the multipin or splice here. This allows for accessibility even if the cable is not all unwound. MISTER-WHEELER ensures gentle ring winding, for a signifi cantly longer cable life if compared to winding an “eight“ . MISTER-WHEELER is the ideal helper for all stage technicians working with audio and video technologies.

Now also available in a compact version with a case measuring 62 x 60 x 60 cm.

Mostly it is the women...who wrap the men around their little finger – but... Here the cables are “wrapped“ around four fingers. One finger is movable for easy removal of the wound cable (gets moved towards the inside!). You can unwind everything, from a 20 mm inside diameter coil opening, even loose cable bundles measuring 300 mm. Cranking is done manually. An angular gear box converts the movement of the rotating disk into a horizontal turning movement.The advantage: The cable stays put and cannot drop towards the front. This enables simple and fast handling. The drum consists of a solid metal rack with 4 locking rollers, 1 deflection roller, 2 centering mandrels, 1 hand crank, and 1 winding plate.The cable meter counter (order separately – ORDER NO: MISTER-METER) measures the unwound length precisely.Movably installed cutting scissors (order separately – ORDER-NO: PC85) turn the winder into the perfect portable helper. If you work with the floor roller then the cable will run across a deflection roller (see picture on right). A second winding plate (MISTER-PLATE) enables winding from ring to ring.Everything has been thought of to make it universal. It is small and handy, so it can be moved to wherever it is needed. You too can utilize all of these advantages !Winding-Ø from 150 – 270 mm variably adjustable. Max. winding width 150 mm; W x H x D: 1110 x 1360 x 500 mm(patent pending)

ORDER NO. DESCRIPTIONMISTER-TWISTER Professional winder

MISTER-PLATE Replacement winding plate

Cable working tools MULTICORE CASE DRUM SYSTEM MISTER WHEELER

Deflection roller

Cable working tools PROFESS. WINDER MISTER TWISTER

ORDER NO. L x W x H1 MISTER-WHEELER 75 x 75 x 40 cm2 MISTER-WHEELER-K 62 x 60 x 60 cm


by

1 2 3

by

MISTER-GUIDE

40Ø 6,3

15

4

80


MEC

HANI

CS &

ACC

ESSO

RIES


MISTER-TROLLEY is ideal for use on the construction site, in the company, or for special cable sales. Handy and transportable like a trolley, it can be used in many different areas. As on all SOMMER working tools, the meter counter MISTER-METER* for length monitoring can be installed.

*) does not include the lovely lady, the cable, or Mister-Meter.

ORDER NO.MISTER-TROLLEY

For cable drums with a diameter of 12 to 120 cm and a max. roll width of 50 cm (for larger roll widths two units can simply be set up side by side). A practical tool for construction site and company. The use of beveled aluminum paneling is new. This makes it very well priced.

ORDER NO.MISTER-ROLLER

Cable working tools FLOOR UNWINDING UNIT MISTER ROLLER

Fig. 1: Winding off the drum onto a ring – ideal for cable fabrication, shipping, or in-store sales. The winding-Ø is variably adjustable from 150 to 270 mm. The meter counter* is optionally available.

Fig. 2: Especially for installations often the cable must be laid out directly from the ring. Here the winding plate can simply be removed and then the ring with the spreading mandrel can be installed. During installation the length can be checked using the meter counter*.

Fig. 3: Drums can be unwound as well. Max. drum-Ø: 500 mm.

Unwinding and rewinding, compact and mobile

MISTER GUIDE...helps your cable or hose turn corners gently.It is very practical because it lets you unwind cables from several reels, rings or drums on a shelf directly onto a permanently installed winding or length measuring unit.Max. diameter is 40 mm.Aluminum casing [W x H x D]: 94 x 94 x 12 mm.Two M6-threaded holes at a distance of 63 mm are available for installation.

ORDER NO. DESCRIPTION MISTER-GUIDE Cable and hose guide MISTER-GUIDE-HLD Table holder for a thickness of up to 40 mm

Cable working tools CABLE GUIDE MISTER GUIDE

MISTER-GUIDE-HLD[80 mm deep]

Cable working tools MISTER TROLLEY WINDER

by Drums can be unwound Drums can be unwound

as well. Max. drum-Ø: 500 mm.



MEC

HANI

CS &

ACC

ESSO

RIES


It is not quite as flexible and comfortable as MISTER TWISTER, but it is even more reasonably priced while fulfilling almost the same requirements. The unit can be screwed to a table with 2 screws (or clamps). Using an assembly bracket you can also install the unwinder on the wall. The simple handling will make this unit pay for itself in no time. The meter counter (optional) for length measurement (order-no. MISTER METER can be installed with a suitable plug.

Winding-Ø: 150 – 270 mm, variably adjustable. Max. winding width: 150 mmW x H x D: 930 x 340 x 340 mm

ORDER NO.MISTER-TURNERMISTER-TURNERSET To wind from drum to drum

CABLE CUTTING SCISSORS

Like butter...these scissors will cut even multiple multipairs of up to Ø in 28 mm. The POWERCUT are the sharpest cable scissors we have ever seen. Thanks to the patented mechanics and the blade system even 48-paired multipairs can be cut easily and cleanly with only one hand. Replacement blades are also available.

POWERCUT – cutting length 85 mm

METER COUNTER

by the running meter...For cables of up to 30 mm in diameter our Mister-Meter measures the cable length precisely. Without question – this practical devise is fantastic, there is nothing available that is better. Before starting to measure you just reset the button to zero. The cable is pulled through, all you do is to read the required measurement and stop at the desired length. Also suitable as a hand or table unit. Robust, practical, and dependable. Tolerance: ±2 %. Two adjustable restrainers ensure that the cable is guided evenly and prevent ”swerving” or ”slipping”, which may lead to unsatifactory measuring precision.Cable meter counter with removable handle.

ORDER NO. DESCRIPTIONPC85 Cable scissors

PC85KL Replacement blade

ORDER NO. W x H x D [mm]MISTER-METER 142 x 104 x 132

Cable working tools UNWINDER TABLE UNIT MISTER TURNER

Cable working tools CUTTING SCISSORS POWERCUT + METER COUNTER MISTER METER


2 4 5

7 8

BRM87-G

BRM-W45

BRM-E

SCT145-GE/SW


MEC

HANI

CS &

ACC

ESSO

RIES


Studio & stage equipment / accessories PROTECTIVE BAGS

ORDER NO. SUITABLE FOR... 1 BAG-CAV-O All MPs, straight output, later assembly 2 BAG-CAV All MPs, straight output 3 BAG-CAO-O All MPs, side output, later assembly 4 BAG-CAO All MPs, side output 5 BAG-LK-O All LK cable plugs and sockets, later assembly 6 BAG-SIEM-O 30-pin Siemens type male/female + triax connectors,

later assembly 7 BAG-SPLICE Splices up to 1.5 m in length, later assembly 8 BAG-BOXX 19“ Stagebox 2 HU, later assembly,

ideal protection for stage sub-distributors + 19“ components or stageboards

It does not matter...what shape, the protective bag will keep your multipin connectors safe from impact, splash water, and other inconvenient interferences...

Since January 2005 the bags are available in different sizes – also for installation at a later time – suitable for all common multipin and LK connectors made by ILME, LK, HARTING, VEAM, AMPHENOL, etc.

Unmercifully...that is how some supply cables are stepped on in crowds or flattened by the tour truck. These compact, low, modular cable channels are the solution and offer optimum protection for your cables.Also they save you the time-consuming task of checking and sorting out the cables after the event. “So you can do it all again tomorrow!“The cable channels are made of light-weight, impact-proof plastic,with a yellow cover and comply with the applicable warning and safety norms.The ideal “security“ for all professional VA-technicians.

B x H outside: 535 x 50 mmB x H inside: 5 channels 35 mm x 35 mm eachWeight: approx. 13 kg per mColor: black with yellow cover

A reasonable alternative is the cable guide tape, with simultaneous warning and identifying function.

Studio & Stage Equipment / Accessories CABLE CHANNELS/CABLE BRIDGE/CABLE TAPE

ORDER NO. DESCRIPTION BRM87-G Cable channel straight, 870 mm BRM-W45 Cable channel with 45°angle BRM-E End piece for cable channel SCT145-GE/SW Safety cable tape 145 mm x 30 m

Application example

2 4 5

Studio & stage equipment / accessories PROTECTIVE BAGS

SUITABLE FOR... SUITABLE FOR...

It does not matter...what shape, the protective bag will keep your multipin connectors safe from impact, splash water, and other inconvenient interferences...

Since January 2005 the bags are available in different sizes – also for installation at a later time – suitable for all common multipin and LK connectors made by ILME, LK, HARTING, VEAM, AMPHENOL, etc.

1

2 34

5

6

7

8

BRM87-GBRM87-G

BRM-W45

BRM-E

that is how some supply cables are stepped on in crowds or flattened by the tour that is how some supply cables are stepped on in crowds or flattened by the tour truck. These compact, low, modular cable channels are the solution and offer

Also they save you the time-consuming task of checking and sorting out the cables

The cable channels are made of light-weight, impact-proof plastic,

CABLE CHANNELS/CABLE BRIDGE/CABLE TAPECABLE CHANNELS/CABLE BRIDGE/CABLE TAPE


AT0165-SI

AT0008H-GS

AT0202

AT0200-SW

AT0209 AT211-WS

AT0007-RAINBOW

AT4000

AT0307 + AT0324AT2000

SOMMER-TAPES


MEC

HANI

CS &

ACC

ESSO

RIES


Installation accessories GAFFA TAPES, INSULATING TAPES

Stick that...cable to your floor or light traverse.

ADVANCE supplies a series of high quality tapes with excellent tearability and gluing properties, free of remnants, but with great adhesion.• We offer Gaffa Tapes in three qualities, the AT0165, a standard adhesive

tape with good adhesive properties, and the AT0202, free of residues for professional stage technologies and live sound. Practical is the AT0202 in a 10 m pocket format – ideal for all trapeze artists.

• The original Gaffa Tape AT0200 (fabric) is absolutely refection-free and thus suitable for professional video technology.

• The warning band AT0008H is yellow and black for identification of obstacles (stairways, tripods, etc.).

• The anti-slipping tape AT2000 can be used as an anti-slipping base for e.g. stairsteps, ladders, etc.

• The adhesive tape AT0209-TR for dancefloors is transparent and can be used to inconspicuously connect dancefloor elements. It is also suitable for electrical repairs.

• The AT0307-CR is a double-sided adhesive tape with a different adhesive power on each side. This makes it suitable for short term adhesion and removal without residue, e.g. for floor covering on stage and at exhibitions.

• For labeling, e.g. of mixing panels, you can use the AT211-WS. It is heat-resistant up to 80 °C and can be removed free of residue.

• The AT0201-SET is ideal for labeling of film reels with different colors.• The electrical insulating tape AT0007 is available in black, red, and grey, and

as a rainbow pack with 10 different color rolls – see photograph.

APPLICATION:Electrical, live sound, outdoors, safety, churches, theatres, sets, film, video, construction, sanitary installation.

GAFFA adhesive tapes Ad

hes.

str

eng

thN

o r

esid

ue

No

n-re

flec

tive

Fla

me-

reta

rda

ntV

erti

cal t

ear

Wa

ter-

resi

sta

nt

ORDER NO.W x L

[mm x m] COLOR AT0165-SW 50 x 50 black ++ + – + + +AT0165-SI 50 x 50 silver ++ + – + + +AT0165-WS 50 x 50 white ++ + – + + +AT0202-SW 50 x 50 black ++ ++ – + + +AT0202-SI 50 x 50 silver ++ ++ – + + +AT0202-WS 50 x 50 white ++ ++ – + + +AT0200-SW 50 x 50 black mat ++ ++ ++ ++ + +Warning tapesAT0008H-GS 50 x 33 yellow/black ++ + – – – +Non-slipping tapesAT2000-SW 50 x 18 black ++ – ++ – – ++Dance floor adhesive tapesAT0209-TR 50 x 33 transparent ++ + + + – +Double-sided adhesive tapesAT0307-CR 50 x 25 creme ++ ++ – – – +AT0324-SW 50 x 50 black ++ ++ – – – +Labeling tapesAT211-WS 19 x 50 white + ++ + – – –Electrical insulating tapesAT0007-SW 19 x 33 black ++ + – ++ – ++AT0007-RT 19 x 33 red ++ + – ++ – ++AT0007-GR 19 x 33 grey ++ + – ++ – ++AT0007-GR-15/10 15 x 10 grey ++ + – ++ – ++AT0007-RAINBOW 15 x 10 10 colors ++ + – ++ – ++SOMMER adhesive tapesST0202-SW 50 x 50 black ++ ++ – + + +ST0200-SW 50 x 50 black mat ++ ++ ++ ++ + +Warning tapesST0008H-GS 50 x 33 yellow/black ++ + – – – +

BEST QUALITY

TAPES!



MEC

HANI

CS &

ACC

ESSO

RIES


This shrink tubing made of radial polyolefine has an adhesive coating on the inside. It complies with MIL-I23053/4. The shrinking temperature is > 120 °C. The black shrink tubing is especially suitable for splices, repair work, or strain- resistant connections. The trans parent version is perfectly suitable for cable and plug labeling.

The shrinking rate is 3 : 1, making it suitable for almost all diameters. This shrink tubing should not be missing in any assortment.Advantages: Water tight, labels do not slip, attractive optics

This insulating tubing can be used to protect multipair wire pairs. The inside diameter of 3 mm is ideal for almost all common foil-insulated multipairs. The insulating hose is somewhat more robust, attractive, and much more reasonably priced than shrink tubing – and – it is much easier to pull over the wire pairs. New is the transparent insulating tubing with an inside diameter of 4.0 mm. It is ideal for the protection of

numbered wire pairs. And you will save time and money. For fixing you can use shrink tubing BPDW, for coding shrink tubing BP. The insulating tubing is available in black, green, and transparent.

Shrink tubing with inside adhesive, length 1.20 mORDER NO. Ø BEFORE SHRINKING COLOUR BPDW120-12/04-SW 12.0 mm black BPDW120-18/06-SW 18.0 mm black BPDW120-24/08-SW 24.0 mm black BPDW120-39/13-SW 39.0 mm black BPDW120-12/04-TR 12.0 mm transparent BPDW120-18/06-TR 18.0 mm transparent BPDW120-24/08-TR 24.0 mm transparent BPDW120-39/13-TR 39.0 mm transparent

Insulating tubing made of PVCORDER NO. INNER-Ø PACKAGING COLOUR ABC10030401 3.0 mm 100 m black ABC10030409 3.0 mm 500 m green ABC10040501 4.0 mm 100 m transparent

inside adhesive

Installation accessories shrink tubing SHRINK TUBING with INSIDE ADHESIVE

Installation accessories shrink tubing INSULATING TUBING PVC

Long and thick !

By the running meter !

Universal shrink tubing, incl. adhesive for repairs, length 0.25 m, black, for Ø 10.0 – 35.0 mm. Rough up the cable jacket... preheat it to approx. 60 °C... place the sleeve around the damaged area... apply the closing track and heat up until adhesive protrudes. Then cut off any protruding material.

ORDER NO. BPDW026-SW

1.20 m

Installation accessories REPAIR TAPE

When things go wrong...you have a problem – and it‘s a good thing that some problems are easy to solve.This residue-free SILICONE-REPAIR TAPE seals air, pressure and water leaks in seconds. You can easily stretch it like adhesive tape and wrap it around clean damaged areas. It is excellently suited for quick, durable cable and wire repairs, for bundling or as cable/plug or corrosion protection on metals – and it is ideal for use on grip surfaces of tools.

The transparent version is suitable for additional labelling. The SILICONE-REPAIR TAPE resists UV-radiation and oils, light acids and gasoline which makes it ideally suitable to insulate and repair cable jackets, fuel lines, water and cooling hoses – e.g. when your car breaks down.

Tensile strength: 4.1 N/mm²Flexibility: max. 300 %Isolation voltage: approx. 8000 V at 20 µmTemperature range: –55 °C...+250 °C

It should not be missing in any toolbox, household or vehicle.

ORDER NO. W x L COLOURSRT24-TR 24 mm x 3.6 m transparent

SRT24-SW 24 mm x 3.6 m black

SRT48-TR 48 mm x 10.9 m transparent

SRT48-SW 48 mm x 10.9 m black

Other colors are available upon request



MEC

HANI

CS &

ACC

ESSO

RIES


SHRINK TUBING SET, NUMBEREDThese short...pieces of shrink tubing are used for numbering and coding of multipair splices. The numbers from 0 – 9 can save you a lot of time and you will be able to immediately identify the assignments on your multipair. For 2-digit labeling you can simply slide two pieces of shrink tubing side by side. The shrinking rate is 3 : 1 with a fixing length of 20 mm.

SHRINK TUBING SET, LABELLEDExtremely practical...are the shrink tubing sets for multipair splice coding.The fixing length of the shrink tubing is 90 mm, the shrinking rate 3 : 1.For enduring readability in extreme conditions we recommend that a 120 mm long piece of the transparent BT-48/TR, or the BT-95/TR for the somewhat thicker speaker coding, be used to cover the labels.

Installation accessories SHRINK TUBING

The shrink tube music boxThe box holds very high quality, enduring shrink tubing made of polyolefine in a handy shape. The dispenser box is ideal for shop use or mobile applications. The shrink tubing complies with the international specifications for professional use. The shrinking rate is 2 : 1. To obtain the final shrinking value you simply have to divide the pre-shrunk diameter by 2.

Available in colors – please add the color code to the order-no.: black (SW), white (WS), red (RT), yellow (GE), blue (BL), green (GN), and transparent TR). Order example: BT-48/SW

Shrink tubing in dispenser boxORDER NO. Ø BEFORE SHRINKING CONTENTS BT-12/COLOR 1.2 mm 10 m BT-16/COLOR 1.6 mm 10 m BT-24/COLOR 2.4 mm 10 m BT-32/COLOR 3.2 mm 10 m BT-48/COLOR 4.8 mm 10 m BT-64/COLOR 6.4 mm 5 m BT-95/COLOR 9.5 mm 5 m BT-127/COLOR 12.7 mm 5 m BT-190/COLOR 19.0 mm 5 m BT-254/COLOR 25.4 mm 3 m

Installation accessories shrink tubing SHRINK TUBING in DISPENSER BOXES

TECHNICAL DATAShrinking rate: 2 : 1Application temperature: –55 °C / +135 °CFlammability: Fire-resistant and self-contaminatingShrinking temperature: > 100 °CDisruptive strength: > 20 kV/mm according to IEC 243Specifications: UL224 125 °C, except transparent Insulating material class: B, according to VDE 0530

Print Service

Now we also offer

individually imprinted

shrink hosing, incl.

logo imprinting.

Shrink tubing, numberedORDER NO. Ø BEFORE SHRINKING CONTENTS BP105-3,2x20 3.2 mm 50 pcs. (5 x 0 – 9) BP105-10x20 10.0 mm 50 pcs. (5 x 0 – 9)

Shrink tubing sets, labelledORDER NO. Ø BEFORE SHRINKING CONTENTS BTN-CH01-08 Ø 4.8 mm (black) Channel 1 – Channel 8 BTN-CH09-16 Ø 4.8 mm (black) Channel 9 – Channel 16 BTN-CH17-24 Ø 4.8 mm (black) Channel 17 – Channel 24BTN-CH25-32 Ø 4.8 mm (black) Channel 25 – Channel 32BTN-CH33-40 Ø 4.8 mm (black) Channel 33 – Channel 40 BTN-CH41-48 Ø 4.8 mm (black) Channel 41 – Channel 48 BTN-RT01-12 Ø 4.8 mm (red) Return 1 – Return 12 BTN-SP01-04 Ø 9.5 mm (black) Speaker 1 – Speaker 4

SHRINK SLEEVING SET WITH INDIVIDUAL PRINTINGSo unique and individual...that‘s how shrink-on tubes can be. Use our practical print service and order your individual shrink-on tubes with your own personal inscription or your companylogo. Just send us your artwork as a jpg, tif, or eps file or vector graphic together with your order. The text length or logo width should not exceed 5 cm. The individually printable shrink-on tube sets are available in black with a diameter of 9, 15 or 29 mm and a length of 5 cm.

Shrink-on tubes, numbered ORDER NO. Ø BEFORE SHRINKAGE CONTENTS PRINT-09-050-SW Ø 9 mm (black) 10 pcs. PRINT-15-050-SW Ø 15 mm (black) 10 pcs. PRINT-29-050-SW Ø 29 mm (black) 10 pcs.

NEW!

0 1 2 3 4 5 6 7 8 9



MEC

HANI

CS &

ACC

ESSO

RIES


Like glue...these tapes will hold wound cables and other things together. We offer two qualities, one for occasional use and one for frequent professional use.The cable binders with treatable PA-plastic (KLETT..P) or a metal loop (KLETT..M) are incredibly robust and intended for stage and live sound. The cable binders with metal loop and KLETT13-200-.. are available with adhesive flaps in colors black (SW), blue (BL), red (RT), green (GN), or yellow (GE). Please add the color code to the order-no. Also available is VELCRO by the meter (hooks in front – fleece on the back) for control cabinet installation (Fig. A) and the elimination of annoying cable salad (Fig. B + C), as well as self-adhesive black edge protection tape (KLETT..F) or adhesive dots (Ø 47 mm with hooks or fleece) – ideal for stage and event construction and scratch-resistant underlayment for casings and HiFi-components (Fig. D).

Installation accessories VELCRO TAPE

Sample applications:

Fig. A Fig. DFig. B Fig. C

Who would have thought...that there are differences in quality among cable binders. Here we have compiled a small, suitable program with uncompromizing elasticity and closing safety.

Cable binders, black – packaging 100 pcs.ORDER NO. SIZE PACKAGING KABI3,5-150-SW 3.5 x 150 mm 100 pcs. KABI4,6-200-SW 4.6 x 200 mm 100 pcs. KABI7,8-540-SW 7.8 x 540 mm 100 pcs. KABI7,8-750-SW 7.8 x 750 mm 100 pcs.

Installation accessories CABLE BINDERS

A whole bundle...is held in place simply and efficiently for clarity and perfect protection. It‘s easy to do with the special installation tool (please order separately) - ideal for control cabinets and line installation or for use in the office. The material is polypropylene. Temperature range: –60 °C... +110 °C, halogen-free, oil-resistant, self-extinguishing accord. to UL94HB, available in grey (GR), white (WS) or black (SW).Please add color-code behind order-no.

ORDER NO. NOM. SIZE WALL THICKNESS SPS16-.. 16 mm 0.80 mm SPS27-.. 27 mm 1.05 mm SPS16-Tool Installation tool for SPS 16-..SPS27-Tool Installation tool for SPS 27-..

Installation accessories SPIRAL TUBING

Large gaps in the slotted area enable simple and clean branching.

New in the program is the reusable 13 mm wide and 750 mm long cable binder “XXL“. The special closure makes it reusable and especially suitable for temporary and heavy-duty closure (capacity: up to 888 N). Typical areas of application

are building technology and electrical installation as well as e.g. gardening, landscaping or scaffolding.

Cable binder “XXL“Polyamide, temperature range: –40 °C… +85 °CColor and order-code: yellow: GE, black: SW

ORDER NO. SIZE KABI13-750-COLOR 13 x 750 mm

ORDER NO. W x L [mm] COLOR PACKAGINGKLETT13-200-.. 7 x 200 please state 10 pcs.

KLETT15PS-150-SW 15 x 150 black + SC logo 10 pcs.

KLETT15PS-300-SW 15 x 300 black + SC logo 10 pcs.

KLETT25-300-SW 17 x 300 black 10 pcs.

KLETT25P-360-SW 25 x 360 black 10 pcs.

KLETT50P-810-SW 50 x 810 black 10 pcs.

KLETT13-200-.. 25 x 300 please state 10 pcs.

KLETT50M-500-GE 50 x 500 yellow 10 pcs.

KLETT50M-800-GE 50 x 800 yellow 10 pcs.

KLETT10-GN 10 x infinite green 25 m

KLETT20-SW 20 x infinite black 25 m

Edge protection tape:KLETT19F-SW 19 x infinite black 15 m roll

Adhesive dots:KLETT47-SW Ø 47 – dots black 10 pair

NEW!

NEW!

KLETT25-300-SW

KLETT20-SW

KLETT19F-SW

KLETT47-SW

KLETT25M-300-..

KLETT25P-360-SW

KLETT25M-300-..KLETT25M-300-..KLETT25M-300-..KLETT25M-300-..KLETT25M-300-..

Sample applications:

KLETT15PS-300-SW

KLETT50M-500-GE



MEC

HANI

CS &

ACC

ESSO

RIES


Get ready to fight…because bundling cables on your desk is not an easy task. The halogen-free, flexible and robust braided hosing “GFS“ not only has a tight grip on your cables – it also looks very appealing. We offer the braided hosing in a closed version or with a side opening for subsequent installation. The later is available with a 25 % overlap or Velcro on the side to allow the cable to be pulled in and out. The hosing is available in white, silver or black, depending on the version. To avoid fraying, please note that the ends must be sealed with a hot wire after cutting.Our service: You can order all versions in your desired length individually and with sealed ends. Min. length: 1 m.

Order-code for your color choice: black: SW silver: SI white: WSIf not stated otherwise we deliver the hosing in black.

Installation accessories BRAIDED HOSING / CABLE HOSING

before after

ORDER NO. DIAMETER MAX. LENGTH/ROLLGFS-KLETT-COLOR 20 – 30 mm 50 m

black white

Open version with Velcro on the side Temperature range: –10 °C…+50 °C

Order-code for your color choice: black: SW silver: SI white: WSIf not stated otherwise we deliver the hosing in black.

Closed versionTemperature range: –50 °C…+150 °C

ORDER NO. DIAMETER MAX. LENGTH/ROLLGFS-200-COLOR 20 – 40 mm 50 m

GFS-400-COLOR 40 – 80 mm 50 m

GFS-550-COLOR 55 – 110 mm 50 m

Open version with 50 % – 25 % overlapping (depending on bunch diameter), only available in black. Temperature range: –70 °C… +125 °C

ORDER NO. DIAMETER MAX. LENGTH/ROLLGFS-080-OPEN 5 – 8 mm 100 m

GFS-130-OPEN 10 – 13 mm 50 m

GFS-190-OPEN 16 – 19 mm 25 m

GFS-250-OPEN 19 – 25 mm 25 m

GFS-290-OPEN 25 – 29 mm 15 m

GFS-320-OPEN 29 – 32 mm 15 m

GFS-380-OPEN 32 – 38 mm 15 m

NEW!

because bundling cables on your desk is not an easy task. The halogen-free, because bundling cables on your desk is not an easy task. The halogen-free, flexible and robust braided hosing “GFS“ not only has a tight grip on your cables – it also looks very appealing. We offer the braided hosing in a closed version or with a side opening for subsequent installation. The later is available with a 25 % overlap or Velcro on the side to allow the cable to be pulled in and out. The hosing overlap or Velcro on the side to allow the cable to be pulled in and out. The hosing is available in white, silver or black, depending on the version. To avoid fraying,

Our service: You can order all versions in your desired length individually and with



MEC

HANI

CS &

ACC

ESSO

RIES


Full blast!You can fill these half-rounded aluminum pipes with all kinds of cable for a clean cable infeed.A recipe for the successful elimination of your cable salad: Just screw or glue the carrier rail to the floor, ceiling or wall, insert the cables and reattach the attractive cover. Finished!

Temperature range: –10 °C… +50 °C

Installation accessories CABLE CHANNELS FOR PERMANENT INSTALLATION

Order-code for your color choice: black: SW silver: SI white: WS

ORDER NO. WIDTH HEIGHT LENGTHKFE-3-110-COLOR 33 mm 18 mm 110 cm

KFE-3-160-COLOR 33 mm 18 mm 160 cm





Adapter set for clean installation in corners including 1 x C- and 1 x L-adapter


ORDER NO. WIDTHKFE-CL3-COLOR 33 mm

KFE-CL5-COLOR 50 mm

before after

L– Adapter

C– Adapter

T– Adapter

T-adapter


ORDER NO. WIDTH EMPF.VK-PREISKFE-T3-COLOR 33 mm 22,79 €KFE-T5-COLOR 50 mm 27,50 €



MEC

HANI

CS &

ACC

ESSO

RIES


ORDER NO. INCHMAX. LOAD CAPACITY

WALL CLEARANCE

ROTATING ANGLE TILT ANGLE

MAX. HOLE SPACING

VESA 50 75 100 200 400 200 x 100 400 x 200 600 x 400

ANTI-THEFT DEVICE

BUBBLE LEVEL COLOUR

H-BTV-TOP1-SI 23“ – 37” 56 kg – – +15°/ –5° 515 x 320 mm – – – x – – x – x –

H-BTV-TOP2-SI 37” – 63” 80 kg – – +10° 740 x 480 mm – – – – x – x x x –

A tight grip and they won’t slip!Whether you want to place your screen/beamer on the ceiling, on a wall, a table or on the floor – our elegant, high-quality brackets will always keep a firm grip on your valuable media equipment.

In addition to the premium STUDIO & HOME range, we also offer our CONFERENCE brackets of ultimate quality and safety standards established for the highest demands of conference business.

Here is a practical and brief overview:

Installation accessories BRACKETS

STUDIO & HOME – Ceiling bracket


WALL CLEARANCE


MAX. HOLE SPACING

VESA 50 75 100 200 400 200 x 100 400 x 200 600 x 400

ANTI-THEFT DEVICE

BUBBLE LEVEL COLOUR

H-BTV-WB1-SW 23“ – 37” 50 kg 14.5 mm – – 400 x 400 mm – – – x x x x – – x

H-BTV-WB2-SW 32” – 50” 50 kg 14.5 mm – – 600 x 600 mm – – – – x – x x – x

H-BTV-WS1-SI 23” – 37” 75 kg 25 mm – – 425 x 330 mm – – – x – – x – x x

H-BTV-WS2-SI 32” – 63” 80 kg 25 mm – – 725 x 500 mm – – – – x – x x x x

H-BTV-WN-SI 37” – 50” 80 kg 85 mm – ±15° 735 x 415 mm – – – – x – x x x x

H-BTV-WD1-SW 17” – 37” 50 kg 30 mm – – 200 x 200 mm – – x x – x – – – x

H-BTV-WD2-SW 23” – 42” 50 kg 43 mm – – 400 x 400 mm – – – – x – x – – x

H-BTV-WD3-SW 32” – 60” 50 kg 50 mm – – 600 x 400 mm – – – – x – x x – x

H-BTV-WF1-SW 10” – 40” 45 kg 115 mm ±45° –5°/ +20° 400 x 200 mm – x x x – x x – – –

H-BTV-WF2-SW 14” – 40” 45 kg 100 – 340 mm 2 x 180° –5°/ +20° 400 x 200 mm – x x x – x x – – –

H-BTV-WF3-SW 14” – 40” 45 kg 95 – 555 mm 3 x 180° –5°/ +20° 400 x 200 mm – x x x – x x – – –

H-BTV-WU-SW 37” – 55” 35 kg 40 – 625 mm 3 x 180° +20° 715 x 500 mm – – – – x – – x – –

STUDIO & HOME – Wall bracket


WALL CLEARANCE


MAX. HOLE SPACING

VESA 50 75 100 200 400 200 x 100 400 x 200 600 x 400

ANTI-THEFT DEVICE

BUBBLE LEVEL COLOUR

H-BTV-TS-SI to 32” 20 kg – 270° –5°/ +20° 100 x 100 mm x x x – – – – – – –

STUDIO & HOME – Table bracket


WALL CLEARANCE


MAX. HOLE SPACING

VESA 50 75 100 200 400 200 x 100 400 x 200 600 x 400

ANTI-THEFT DEVICE

BUBBLE LEVEL COLOUR

H-BTV-F-SI 32” – 50” 40 kg – – – – – – – – x – x x – –

STUDIO & HOME – Base


WALL CLEARANCE


MAX. HOLE SPACING

VESA 50 75 100 200 400 200 x 100 400 x 200 600 x 400

ANTI-THEFT DEVICE

BUBBLE LEVEL COLOUR

H-BEA-TOP-SI – 10 kg 100 mm 360° ±25° – – – – – – – – – – –

CONFERENCE – Ceiling brackets for beamers


WALL CLEARANCE


MAX. HOLE SPACING

VESA 50 75 100 200 400 200 x 100 400 x 200 600 x 400

ANTI-THEFT DEVICE

BUBBLE LEVEL COLOUR

H-FTV-WS-SI 32” – 42” 80 kg 35 mm – – 700 x 1000 mm – – – x x x x x optimum x

H-FTV-WN-SW 46” – 63” 75 kg 45 - 148 mm – 0 – 10° 900 x 600 mm – – – x x x x x – x

H-FTV-WF1-SW 26” – 37” 25 kg 43 - 140 mm ±45° 0 –15° 200 x 200 mm – x x x – x – – – x

H-FTV-WF2-SW 26” – 42” 25 kg 47 - 225 mm ±45° 0 –15° 400 x 400 mm – – x x x x x – – x

H-FTV-WF3-SW 26” – 42” 25 kg 49 - 455 mm ±90° 0 –15° 400 x 400 mm – – x x x x x – – x

CONFERENCE – Wall bracket


WALL CLEARANCE


MAX. HOLE SPACING

VESA 50 75 100 200 400 200 x 100 400 x 200 600 x 400

ANTI-THEFT DEVICE

BUBBLE LEVEL COLOUR

H-FTV-TS-COLOUR 1 x 14”–24” 1 x 10 kg – 360° ±15° 100 x 100 mm – x x – – – – – – – H-FTV-TD-COLOUR 2 x 14”–24” 2 x 10 kg – 360° ±15° 100 x 100 mm – x x – – – – – – –

CONFERENCE – Wall bracket



MEC

HANI

CS &

ACC

ESSO

RIES


Installation accessories “STUDIO & HOME” BRACKETS

Ceiling brackets for flat screens (LCD/Plasma/LED)

23“ to 37“Max. load capacity: 56 kgTilt angle : –5°/ +15°Adjustable lengths: 380 to 630 mm (in 50 mm spacings)Max. hole spacing: 515 x 320 mmVESA Standard: 200 / 400 x 200 mmIncl. anti-theft device

ORDER NO. COLOURH-BTV-TOP1-SI silver

37“ to 63“Max. load capacity: 80 kgTilt angle : +10°Adjustable lengths: 380 to 630 mm (in 50 mm spacings)Max. hole spacing: 740 x 480 mmVESA Standard: 400 / 400 x 200 / 600 x 400 mmIncl. anti-theft device

ORDER NO. COLOURH-BTV-TOP2-SI silver

Wall brackets for flat screens (LCD/Plasma/LED)

23“ to 37“Max. load capacity: 50 kgWall clearance: 14.5 mmMax. hole spacing: 400 x 400 mmVESA Standard: 200 / 400 / 200 x 100 / 400 x 200 mmIncl. bubble level

ORDER NO. COLOURH-BTV-WB1-SW black

32“ to 50“Max. load capacity: 50 kgWall clearance: 14.5 mmMax. hole spacing: 600 x 600 mmVESA Standard: 400 / 400 x 200 / 600 x 400 mmIncl. bubble level

ORDER NO. COLOURH-BTV-WB2-SW black

NEW!



MEC

HANI

CS &

ACC

ESSO

RIES


23“ to 37“Max. load capacity: 75 kgWall clearance: 25 mmMax. hole spacing: 425 x 330 mmVESA Standard: 200 / 400 x 200 mmIncl. anti-theft deviceIncl. bubble level

ORDER NO. COLOURH-BTV-WS1-SI silver

32“ to 63“Max. load capacity: 80 kgWall clearance: 25 mmMax. hole spacing: 725 x 500 mmVESA Standard: 400 / 400 x 200 / 600 x 400 mmIncl. anti-theft deviceIncl. bubble level

ORDER NO. COLOURH-BTV-WS2-SI silver

37“ to 50“Max. load capacity: 80 kgWall clearance: 85 mmTilt angle: ±15°Max. hole spacing: 735 x 415 mmVESA Standard: 400 / 400 x 200 / 600 x 400 mmIncl. anti-theft deviceIncl. bubble level

ORDER NO. COLOURH-BTV-WN-SI silver

17“ to 37“Max. load capacity: 50 kgWall clearance: 30 mm360° horizontally adjustableMax. hole spacing: 200 x 200 mmVESA Standard: 100 / 200 / 200 x 100 mmIncl. bubble level

ORDER NO. COLOURH-BTV-WD1-SW black

23“ to 42“Max. load capacity: 50 kgWall clearance: 43 mm360° horizontally adjustableMax. hole spacing: 400 x 400 mmVESA Standard: 400 / 400 x 200 mmIncl. bubble level


32“ to 60“Max. load capacity: 50 kgWall clearance: 50 mm360° horizontally adjustableMax. hole spacing: 600 x 400 mmVESA Standard: 400 / 400 x 200 / 600 x 400 mmIncl. bubble level




MEC

HANI

CS &

ACC

ESSO

RIES


10“ to 40“Max. load capacity: 45 kgWall clearance: 115 mm±45° swivel20° horizontally adjustableTilt angle: –5°/ +20°Max. hole spacing: 400 x 200 mmVESA Standard: 75 / 100 / 200 / 200 x 100 / 400 x 200 mm

ORDER NO. COLOURH-BTV-WF1-SW black

14“ to 40“Max. load capacity: 45 kgWall clearance: 100 to 340 mm2 x 180° swivel20° horizontally adjustableTilt angle: –5°/ +20°Max. hole spacing: 400 x 200 mmVESA Standard: 75 / 100 / 200 / 200 x 100 / 400 x 200 mm


14“ to 40“Max. load capacity: 45 kgWall clearance: 95 to 555 mm3 x 180° swivel20° horizontally adjustableTilt angle: –5°/ +20°Max. hole spacing: 400 x 200 mmVESA Standard: 75 / 100 / 200 / 200 x 100 / 400 x 200 mm


Table bracket for flat screens (LCD/Plasma/LED)

1 x to 32“Max. load capacity: 20 kg270° swivel20° horizontally adjustableTilt angle: –5°/ +20°Max. hole spacing: 100 x 100 mmVESA Standard: 50 / 75 / 100 mm

ORDER NO. COLOURH-BTV-TS-SI silver


H-BEA-TOP-SI

H-BEA-EF... H-BEA-EV...

100

mm

360°

±25°


MEC

HANI

CS &

ACC

ESSO

RIES


Ceiling holder for beamers Max. load: 10 kgWith pressure spring-ball joint-ceiling fixtureIncl. ceiling coverMin. ceiling distance 100 mmTurnable by 360°Tilting angle: –25° to +25°Incl. adjustable universal fastener with safety screws and spacersFor all beamers up to 10 kg in weightColor: silver

Variably adjustable (incl. inside cable guide) or rigid extension adapter available,see chart.

ORDER NO. DESCRIPTIONH-BEA-TOP-SI Ceiling holder for beamer

H-BEA-EF050 Extension rigid, 50 cm



H-BEA-EV40/60 Extension variable, 40 – 60 cm



Installation accessories HOLDING FIXTURES

Application

Wall brackets for flat screens (LCD/Plasma/LED)

32“ to 42“Max. load capacity: 80 kgWall clearance: 35 mmMax. hole spacing: 700 x 1,000 mmVESA Standard: 200 / 400 / 200 x 100 / 400 x 200 / 600 x 400 mmIncl. bubble level

ORDER NO. COLOURH-FTV-WS-SI silver

46“ to 63“Max. load capacity: 75 kgTilt angle: 0 –10°Wall clearance: 45 to 148 mmMax. hole spacing: 900 x 600 mmVESA Standard: 200 x 100 / 200 / 300 x 200 / 300 / 400 x 200 /400 / 600 x 400 / 800 x 400 / 800 x 600 / 900 x 600 mmIncl. bubble levelIncl. anti-theft device

ORDER NO. COLOURH-FTV-WN-SW black

NEW!

NEW!


H-FTV-TS-...

360°

H-FTV-TD-...

360°

275

– 36

0 m

m

180 mm 180 mm

290

– 37

5 m

m


MEC

HANI

CS &

ACC

ESSO

RIES


before after

Table holder for flat screen monitors (LCD/plasma)

1 x 14“ – 24“ or 2 x 14“ – 24“1 x 10 kg or 2 x 10 kgInfinitely variable height adjustmentIncl. adjustment function for horizontal and vertical formatTurning/tilting and pivotingTable plate thickness up to 50 mmVESA Standard: 75 x 75 and 100 x 100 mm

Order-code for your color choice: black: SW silver: SI

ORDER NO. VERSIONH-FTV-TS-COLOUR Holder for one screen monitors

H-FTV-TD-COLOUR Holder for two screen monitors

26“ to 37“Max. load capacity: 25 kgTilt angle: 0 –15°Wall clearance: 43 to 140 mmMax. hole spacing: 200 x 200 mm±45° swivelVESA Standard: 75 / 100 / 200 / 200 x 100 mmIncl. bubble level

ORDER NO. COLOURH-FTV-WF1-SW black

26“ to 42“Max. load capacity: 25 kgTilt angle: 0 –15°Wall clearance: 47 to 225 mmMax. hole spacing: 400 x 400 mm±45° swivelVESA Standard: 100 / 200 / 400 / 200 x 100 / 400 x 200 mmIncl. bubble level


26“ to 42“Max. load capacity: 25 kgTilt angle: 0 –15°Wall clearance: 49 to 455 mmMax. hole spacing: 400 x 400 mm±90° swivelVESA Standard: 100 / 200 / 400 / 200 x 100 / 400 x 200 mmIncl. bubble level


NEW!

NEW!

NEW!



MEC

HANI

CS &

ACC

ESSO

RIES


Installation / premade accessories CABLE CLEANER

What a drag...it is to wind up or clean a messy, dirty cable.From now on no more cumbersome cleaning will be necessary! You will really be surprised how this magic rag will remove all dirt. Even sticky, dried up dirt can be removed very easily. The cable will look like new and the CABLE CLEANER does not harm the cable in any way. The combination of the cloth fibres and the special chemical cleaner make the CABLE CLEANER an outstanding product and a great help for quick and easy cable cleaning. The tissues also last a long time. Make your life easier by using these small, helpful things. You will save a lot of time. Simply try them out!

ORDER NO. CONTENTS CABLECLEAN 70 cleaning tissues in a dispenser box

Spray your problems away...with this small assortment of useful spray cans, offered for your daily use.

ORDER NO. APPLICATION CONTENTS SP-D Dust off – to clean, dedust, blow off 400 ml SP-T71 Cold spray for cooling, locating electrical and electronic faults, testing of functions, thermostats, and TN start systems 400 ml SP-SP Fine cleaner for contacts NF-, HF-, UHF-range 400 ml SP-T6 Contact spray to clean and maintain contacts, switches, relays, potis, transistors, etc. 400 ml SP-LO Label remover – also suitable for plastics 200 ml SP-SI Silicone spray – sliding and separating agent, care product for rubber, plastic and metal parts 400 ml SP-SCL Screen cleaner – for TFT-/LCD-monitors 200 ml

Installation / premade accessories SPRAYS

Keep a clear view...with our economical cleaning spray for monitors, TVs, tablets, smart phones andall other smooth surfaces. The handy spray bottle contains a 100 % biodegradable,non-alcoholic cleaning agent that removes finger marks, dust, sticky deposits and other unpleasant soilings free from residue.The cleaning spray is available as a set including a special microfibre cloth or as a single spray bottle.

Installation / premade accessories TFT CLEANING SPRAY

ORDER NO. DESCRIPTIONHI-TFT-CLEANSET 125 ml Spray bottle

+ 30 x 30 cm microfibre cloth (orange)

HI-TFT-SPRAY 250 ml Spray bottle

NEW!


WAZ4

WAA WAP130

WAM150

AIW28

AIW13

LSA

WKM28

WAZ-F

WAZ6


MEC

HANI

CS &

ACC

ESSO

RIES


Installation accessories LED LIGHT

Our strippers...drop it all. Based on a large number of requests at the music trade show we have finally taken them into our program. We offer a series of handy and high quality sleeve and insulation removal tools. They are manufactured of a special, absolutely non-breakable plastic. We have been using these multi-functional tools in our company for years and are thrilled about the dependability and good handling.

Tools / measuring instruments TOOLS

ORDER NO. DESCRIPTION WAZ4 Stripping pliers for cable jackets and insulation Ø 0.08 – 6.0 mm2, variably adjustable, stripping length 3 – 20 mmWAZ6 Stripping pliers for flexible and solid wires 0.2 mm² – 6.0 mm², stripping length 5 –12 mm, also suitable for cables with PUR-jacketWAZ-F Stripping pliers for flat cables from 0.75 mm² – 4.0 mm² and round cables from 0.5 mm² – 10 mm², stripping length 8 – 24 mmWAA Stripping tool for cable jackets and insulation with an adjustable stopWKM28 Stripping knife for all round cables Ø 4 – 28 mm incl. 2 completely retractable blades WAM150 Stripping knife with flat tip, length 150 mmWAP130 Stripping tweezers for fast removal of thin insulationAIW28 Stripping tool for removal of cable sleeves and insulation sleeves Ø 4.0 – 28.0 mm2 insulation Ø 0.5 – 6.0 mm2

AIW13 Stripping tool for removal of cable sleeves and insulation sleeves Ø 4.0 – 16.0 mm2 insulation Ø 0.5 – 16.0 mm2 LSA LSA + insertion tool for RJ45 with cutting function, incl. protective bag

ORDER NO. L x W x HLEDLIGHT24 200 x 60 x 25 mm

Turn the night into day...with the help of this practical LED light.

Perfect for every electrician, roadie, DJ, handyman, camper and driver.As a compact alternative, we also offer the slightly smaller LEDLIGHT24 in a rugged plastic housing with a practical hook and magnetic holder (requires 3 x 1.5 V LR06 AA batteries (not included)).

NEW!

LEDLIGHT24


1

2

1


MEC

HANI

CS &

ACC

ESSO

RIES


Insiders...know how hard it can be to tighten 30 XLR-connectors. This often is very cumbersome if it has to be done manually. Here is the suitable tool for efficient and comfortable assembly of XLR-connectors made by NEUTRIK!

ORDER NO. DESCRIPTION HTX Assembly tool suitable for Neutrik NC..-X and NC..-XXHTXP Assembly tool for Neutrik NC..-XX and NP..-XWSW16 Assembly tool for sockets with SW16 in HI-DET

Screwdriver with 6-bit quick changerThis practical, handy screw driver with a 6-bit magazine should not be missing in any toolbox. Pull forward – turn – push back, you will find your desired bit in no time. Nothing gets lost, the bits are held in place magnetically and can be chosen or replaced individually.

ORDER NO. DESCRIPTION WHS-6 Screwdriver with 6 bits

1 WIRE END SLEEVES DIN 46228, Part 4, insulated Installation adapter made of polyamide, resistant to temperatures up to +110 ºC.

ORDER NO. DIAMETER COLOUR QTY. AH1015 1 x 1.5 mm² black 100 AH1025 1 x 2.5 mm² blue 100 AH1040 1 x 4.0 mm² grey 100 AH1060 1 x 6.0 mm² yellow 100 AH1160 1 x 16 mm² blue 100 AH2015 2 x 1.5 mm² black 100 AH2025 2 x 2.5 mm² blue 100

Tools / measuring instruments WIRE END SLEEVES, SILVER SOLDER

2 HICON SILVER SOLDER, HIGH PERFORMANCE with 4 % silver, lead-free accord. to DIN EN29453, Ø 0.5 mm, halogen-free, corrosion-free in compliance with DIN 8516.

ORDER NO. COIL HI-SILO-250 250 g

7-in-1...The HI-MW with an ergonimically formed handle combines several practical tools in one. It is an ideal companion for mobile electricians and live sound technicians.

ORDER NO. DESCRIPTION HI-MW Multipurpose tool HICON

Screwdriver

incl. 2nd bit in the handle, integrated turning bit Ø 3.5 x 0.6 mm, Ø 4.0 x 0.8 mmPhase or voltage tester

voltage range 110 – 250 Volt

Cable cutterfor round cables Ø max. 9 mm

Coax-stripping toolfor coax-cables Ø 4.8 – 7.5 mm

Stripping toolfor solid, flexible wires and drain wires 05 mm² – 6.0 mm²

Stripping toolfor round cables Ø 8 – 13 mm

Ergonomic 2-component grip


NEW!

4 6 11 12 13 145

9

7 8 10

1918 17

1615

9


MEC

HANI

CS &

ACC

ESSO

RIES


Tools / measuring instruments CRIMPING PLIERS

Tools / Measuring instruments FIBER – PROFILE – TOOLBOX

ORDER NO. DESCRIPTION DIAMETER AWG

4 HT-CRIMPSET Universal crimping plier set for all coax-connectors (BNC),(RG179, SMA, SMB, Neutrik BNC not possible), incl. case

5 WCZ0886 Crimping pliers for wire end sleeves, chromed, 6-corner crimping 0.08 – 6.0 mm² 28 – 10

6 WCZ1200 Professional crimping pliers, chromed, incl. case – without inserts

7 WEC1232 Crimping insert for WCZ1200: cable shoes, not insulated 0.5 – 10.0 mm² 20 – 7

8 WEC1260 Crimping insert for WCZ1200: cable shoes, insulated 0.5 – 6.0 mm² 20 – 10

9 WECLOC1271 Crimping insert WEC1271 incl. locator for WCZ1200: twisted contacts, 4-corner crimping 0.14 – 4.0 mm² 25 – 11

WEC1272 Crimping insert for WCZ1200: twisted contacts, 4-corner crimping 1.5 – 6.0 mm² 15 – 10

ß WEC1286 Crimping insert for WCZ1200: RJ45 plug connectors

a WCZ1632 Crimping pliers for cable shoes, not insulated 0.5 – 10.0 mm² 20 – 7

b WCZ1660 Crimping pliers for cable shoes, insulated 0.5 – 6.0 mm² 20 – 10

c WCZ1671 Crimping pliers for twisted contacts, 4-corner crimping 0.14 – 4.0 mm² 25 – 11

WCZ1672 Crimping pliers for twisted contacts, 4-corner crimping 1.5 – 6.0 mm² 15 – 10

d WCZ1690 Crimping pliers for wire end sleeves, 5-corner crimping 0.5 – 6.0 mm² 20 – 10


HEX Crimp [mm]

SHIELD JACKET

e WCZ1201 Professional crimping pliers, chromed – without inserts

DIE-R-BNC-PDC Crimping insert for Neutrik BNC* 6.47 4.53

DIE-R-BNC-PG Crimping insert for Neutrik BNC* 6.47 5.00

f DIE-R-BNC-PJ Crimping insert for Neutrik BNC* 6.47 5.41

DIE-R-BNC-PS Crimping insert for Neutrik BNC* 6.47 7.01

DIE-R-BNC-PU Crimping insert for Neutrik BNC* 6.47 7.36

DIE-R-BNC-PY Crimping insert for Neutrik BNC* 6.47 8.23

DIE-R-BNC-Z Crimping insert for Neutrik BNC* 9.73 9.73

* Fits WCZ1200 and WCZ1201

DESCRIPTION ORDER NO.

g Professional toolbox for HI-FIBER4 system HI-WLC-SET containing:Syringe, canula, AlcoPads, fibre stripper, stripping tool, aramid scissors, epoxy adhesive, polishing foils and disc, drying cabinet, microscope 200 x etc.

h One-click cleaner for fibre optical plugs, FIBERCLEAN also in recessed position, without deinstallation

i 200 Cleaning wipes FIBERWIPES for all fibre optical fibre endings

NEW!

– Subject to change • See the price list for prices • The General Terms and conditions apply (see www.sommercable.com) –– Subject to change • See the price list for prices • The General Terms and conditions apply (see www.sommercable.com) –



MEC

HANI

CS &

ACC

ESSO

RIES


CABLE TESTER MCT8

Trust is good...testing is better. It is good to have a mobile instrument available to test XLRm/f, Speakon, jacks, RCA, DIN, and banana plug connectors. The enclosed test tips enable universal testing on all other, random plug connectors. The display operates with LED and buzzer. Power is supplied by a 9 V block battery (incl. in the shipment), simply replaceable via drawer.

ORDER NO. MCT8

ORDER NO. NTI-MR-PRO NTI-MR2 NTI-DR2Description: Enh. analog audio generator Analog audio generator Digital audio signal generatorFeatures/data: Frequency range: 10 Hz – 20 kHz Frequency range: 10 Hz – 20 kHz up to 192 kHz / 24 Bit

Output level –20 … +18 dBu Output level –76 … +8 dBu AES3, S/PDIF, TOS-Link, ADATSinus/rectangular signal up to 5 kHz Sinus/rectangular signal up to 5 kHz Sync Input: AES3, Word Clock, VideoWhite/pink noise White/pink noise Channel transparency checkPolarity signal Polarity signal Supports Dolby D, D+, E, Sweep with adjustable length Sweep with adjustable length Supports PL II, DTS, DTS-HRSource impedance 12.5 Ω Source impedance 200 Ω Signal runtime measurementRuntime test signal Runtime test signalDC + USB-connection DC + USB-connectionTHD+D –96 dB THD+D –90 dBXLR- and RCA output XLR- and RCA output3 x AA batteries (operating time: 10 h) 3 x AA batteries (operating time: 20 h)

ORDER NO. NTI-AL1 NTI-ML1 NTI-MINISPL NTI-DL1Description: Compact acoustical analyzer Analog audio analyzer Measurement Digital audio analyzerFeatures/data: Ext. sound level analysis with LEQ Level measurement in V, dBu, dBV Microphone Virtual processing of all audio formats

Short term LEQ Frequency measurement for AL1 & ML1 Incl. ADAT + sampling frequencies up to 96 kHz

Sound exposition level SEL THD+N distortion factor Analog + digital audio monitoringRealtime spectrum analysis Noise measurement D/A converter function1/3 Octavos 1/3 Octavos Opt. output compatible with ADAT-LightpipeFFT-analysis with max. resol. up to 1 Hz Control range ppm Bit-statistic incl. fault detectionReverberation time TR60 in octavos Scope function Oscilloscope function Acoustic runtime measurement Polarity testing, time sweepOptionally: Language recognition measurement STI-PAAccord. to IEC60268-13 2003

More NTI-products and -sets are available in our dealer pricelist.

Tools / measuring instruments MEASURING INSTRUMENTS

HDMI CABLE TESTERThe HD-T cable tester allows you to check HDMI cables for transmission and function, ideal for all self-assembled solutions. Using the sweep function the pin assignments are also displayed. Transmitter and receiver can be detached to check already laid cables. The 9 V battery for the transmitter is included.

ORDER NO. HD-T

Digital audio signal generatorDigital audio signal generatorEnh. analog audio generatorEnh. analog audio generator Analog audio generator

Compact acoustical analyzerCompact acoustical analyzerNTI-ML1Analog audio analyzerAnalog audio analyzer

NTI-DL1Digital audio analyzerDigital audio analyzer

NEW!

SUPPORT


NEW!

NEW!

NEW!


MER

CHAN

DISI

NGMERCHANDISING

MERCHANDISING

SOMMER CABLE TORCH LIGHT LEDThe handy mini LED-LAMP with aluminium body provides both regular beam and spotlight beam simply by adjusting the lamp head.

Included in delivery: battery (1 x AAA / 1.5 V), shirt-clip, strap and belt pouch incl. carabiner. It’s delivered in a useful gift pack.

Length: 9.45 cm / Weight: 42 g

ORDER NO. NET COST PRICESOMMER-LEDLAMP 12.90 €

SOMMER CABLE / HICON CARRYING BAG

Size [width x height]: 38 x 41 cm Color: black, with white SOMMER CABLE and HICON logo

ORDER NO. NET COST PRICESOHI-SHOPBAG 1.34 €

SOMMER CABLE BACKPACK...with lots of space! High quality roll rucksack with lots of storage capacity. Front compartment with zipper, breathable material on the back side, cushioned straps and carrying handle. Tough outside made of water-resistant, durable truck tarp – a trendy carrying bag for offi ce, leisure time and sports.

Material: polyester + high quality truck tarpSize [H x W x D]: approx. 62/48 x 34 x 14.5 cmColor: mat black

Imprint: 2-color with SOMMER CABLE logo

ORDER NO. NET COST PRICESOMMER-BACKPACK 19.90 €

SOMMER CABLE ROAD VESTIdeally suited for set-up and breakdown on the road, for windy conditions and bad weather, when it is nice and warm in the hall and you have to deal with ever changing temperatures. This road vest ensures consistent warmth both in- and outdoors – and your arms are free for working.Size: M, XL

ORDER NO. NET COST PRICESOMMER-VEST-SIZE 35.00 €

SOMMER CABLE UMBRELLA

We will not leave you standing in the rain...With our practical SOMMER CABLE umbrella, you will be able to weather any storm.And once the sun shines again, just push a button to collapse and store it. It is small enough to fit into any bag.

Material: MicrofibresSize: 30 x 7.5 cmDiameter: 104 cmAutomatic opening and closing mechanism

ORDER NO. NET COST PRICESOMMER-UMB 17.50 €

SOMMER CABLE / HICON T-SHIRTMaterial: 100% cottonAvailable sizes: M, L, XL

ORDER NO. NET COST PRICESOHI-SHIRT-SIZE 13.60 €

SOMMER CABLE LANYARD

ORDER NO. NET COST PRICESOMMER-LANYARD 2.38 €

SOMMER CABLE CAP• With suede leather shield• Color: black

ORDER NO. COLOUR NET COST PRICESOMMER-CAP black 5.70 €

NEW!


NEW!

NEW!

ME

RC

HA

ND

ISIN

GM

ER

CH

AN

DIS

ING


MER

CHAN

DISI

NG

MERCHANDISING

HICON UTILITY KNIFEIncl. 2 blades for replacement

ORDER NO. NET COST PRICEHICON-CUTTER 3.99 €

SOMMER CABLE PENORDER NO. NET COST PRICESOMMER-PEN 0.90 €

SOMMER CABLE CAR STICKERSingle letters, width 20 cm or 30 cmORDER NO. DESCRIPTION NET COST PRICESOMMER-STICK-CW2 white (for dark background) 20 cm 2.00 € SOMMER-STICK-CW3 white (for dark background) 30 cm 2.50 € SOMMER-STICK-CS2 black (for light background) 20 cm 1.80 €SOMMER-STICK-CS3 black (for light background) 30 cm 2.30 €

SOMMER CABLE NOTEPAD• 75 sheets per pad• Format: 180 x 255 mm • Premium quality paper pure white• Wire-O-binding• Perforated• High-grade, glossy laminated foil cover

ORDER NO. NET COST PRICESOMMER-MEMO 4.90 €

Black lettering.Transparent sticker. 10 x 2.5 cm

ORDER NO. DESCRIPTION NET COST PRICESOMMER-STICK-SW black on transparent 0.55 € SOMMER-STICK-WS white on transparent 0.55 € SOMMER-FOAMSTICK white on black 0.90 € SY-FOAMSTICK white-green on grey 0.95 €

White lettering for dark backgrounds. Transparent sticker. 10 x 2.5 cm

Foam sticker with white lettering on black ground. 9.5 x 1.0 cm

Foam sticker with green-white lettering on grey ground. 6.0 x 1.5 cm

SOMMER CABLE TOWELIdeal for sweaty live performances or your bathroom. Size: 50 x 100 cmColor: black

ORDER NO. NET COST PRICESOMMER-TOWEL 9.00 €

TOM HAPKE – STUDIOBIBLE (English)An easy to understand guide for life and work in a professional sound studio by Tom Hapke, incl. DVD, in English.

ORDER NO. PRICE INCL. SALES TAXSTUDIOBIBLE 24.95 €

SOMMER CABLE STAINLESS STEEL CUPSuper robust stainless steel cup with thermo-double wall for the usage „on the road“.

ORDER NO. NET COST PRICESOMMER-THERMOCUP 9.50 €

SOMMER CABLE STICKERS


3

1 2

3

12

– Life

+ Life

Ground/Shield

3

1 2

– Life

+ Life

Ground/Shield

3

1 2

+ Life

Ground/Shield

3

1 2

+ Life

Ground/Shield

- Life/Life Right

Ground/Shield

+ Life/Life Left

Ground/Shield

+ Life

Ground/Shield

+ Life

+ Life

Ground/Shield

3

12

+Life Send/Left

+Life Return/Right

Ground/Shield

1

23

12

+Life Send/Left 1

+Life Return/Right

Ground/Shield

1

2

+Life Send/Left

+Life Return/Right

Ground/Shield

1

2

1

2

3

4

5

6

7

8

9

10

11


SUPP

ORT

SUPPORT

MICROPHONE CABLE BALANCED (ACCORDING TO IEC-NORM):XLR XLRPIN 1 PIN 1: GROUND/SHIELDPIN 2 PIN 2: + LIFEPIN 3 PIN 3: - LIFE

MICROPHONE CABLE BALANCED:XLR JACK STEREOPIN 1 JACK CASING: GROUND/SHIELDPIN 2 JACK TIP: +LIFEPIN 3 JACK RING: -LIFE

MICROPHONE CABLE UNBALANCED:XLR JACK MONOPIN 1 JACK CASING: GROUND/SHIELDPIN 2 JACK TIP: +LIFEPIN 3 JACK CASING: GROUND/SHIELD

MICROPHONE CABLE UNBALANCED:XLR RCAPIN 1 RCA CASING: GROUND/SHIELDPIN 2 RCA TIP: +LIFEPIN 3 RCA CASING: GROUND/SHIELD

JACK CABLE BALANCED/ STEREO:JACK STEREO JACK STEREOJACK CASING JACK CASING: GROUND/SHIELDJACK TIP JACK TIP: +LIFE/LIFE LEFTJACK RING JACK RING: -LIFE/LIFE RIGHT

JACK CABLE UNBALANCED/ MONO:JACK MONO JACK MONOJACK CASING JACK CASING: GROUND/SHIELDJACK TIP JACK TIP: +LIFE

ADAPTER CABLE UNBALANCED/ MONO:JACK MONO RCAJACK CASING RCA CASING: GROUND/SHIELDJACK TIP RCA TIP: +LIFE

RCA CABLE UNBALANCED/ MONO:RCA RCARCA CASING RCA CASING: GROUND/SHIELDRCA TIP RCA TIP: +LIFE

INSERT/ STEREO CABLE UNBALANCED:JACK STEREO 2 x XLRJACK CASING PIN 1 + 3: GROUND/SHIELDJACK TIP PIN 2 (XLR1): +LIFE SEND/LEFTJACK RING PIN 2 (XLR2): +LIFE RETURN/RIGHT

INSERT/ STEREO CABLE UNBALANCED:JACK STEREO 2 x JACK MONOJACK CASING JACK CASING: GROUND/SHIELDJACK TIP JACK TIP (JACK 1): +LIFE SEND/LEFTJACK RING JACK TIP (JACK 2): +LIFE RETURN/RIGHT

INSERT/ STEREO CABLE UNBALANCED:JACK STEREO 2 x RCAJACK CASING RCA CASING: GROUND/SHIELDJACK TIP RCA TIP (RCA 1): +LIFE SEND/LEFTJACK RING RCA TIP (RCA 2): +LIFE RETURN/RIGHT

Wiring diagrams AUDIO CABLE


35

2

41

35

2

41

Ground/Shield

Data +

Data -

1+

1-

1+

1-

Ground

+ Life

1+

1-

1+

1-

+ Life Channel 1

Ground Channel 1

Ground Channel 2

2+

2- 2-

2+

+ Life Channel 2

31 24 43

1

+ Life Channel 1Ground Channel 1

Ground Channel 2+ Life Channel 2

2 3

12

4

7

568

3

124

7

56

8

31 2

1+

1-

+ Life

Ground 2+

2-

3

1 2

+ Life

Ground

Ground

+ Life

Ground/Shield

Data –1Data +1Data -2

Data +2

31

24

53

1

2 4

5

31

24

53

1

2 4

5

Ground/Shield

Data –

Data +

31

24

5

3

2

Ground/Shield

Data -Data +

13

1 2

3

12

Data +

Data -

Ground/Shield

+ Life

3

1 2

3

12

Ground

12

13

14

16

18

19

20

22

24

15

17

21

23


SUPP

ORT

SUPPORT

SPEAKER CABLE 2-WIRE:SPEAKON SPEAKONPIN 1+ PIN 1+: +LIFEPIN 1- PIN 1-: GROUNDPIN 2+ N.C.PIN 2- N.C.

SPEAKER CABLE 4-WIRE:SPEAKON SPEAKONPIN 1+ PIN 1+ : +LIFE CHANNEL 1PIN 1- PIN 1- : GROUND CHANNEL 1PIN 2+ PIN 2+ : +LIFE CHANNEL 2PIN 2- PIN 2- : +GROUND CHANNEL 2

SPEAKER CABLE 4-WIRE:EP 4-pin EP 4-pinPIN 1 PIN 1: +LIFE CHANNEL 1PIN 2 PIN 2: GROUND CHANNEL 1PIN 3 PIN 3: +LIFE CHANNEL 2PIN 4 PIN 4: GROUND CHANNEL 2

SPEAKER CABLE 8-WIRE:EP 8-pin EP 8-pinPIN 1 PIN 1: +LIFE CHANNEL 1PIN 2 PIN 2: GROUND CHANNEL 1PIN 3 PIN 3: +LIFE CHANNEL 2PIN 4 PIN 4: GROUND CHANNEL 2PIN 5 PIN 5: +LIFE CHANNEL 3PIN 6 PIN 6: GROUND CHANNEL 3PIN 7 PIN 7: +LIFE CHANNEL 4PIN 8 PIN 8: GROUND CHANNEL 4

SPEAKER CABLE 2-WIRE:XLR XLRPIN 1 PIN 1: GROUNDPIN 2 PIN 2: +LIFEPIN 3 N.C.

SPEAKER ADAPTER CABLE2-WIRE:XLR SPEAKONPIN 1 1- : GROUNDPIN 2 1+ : +LIFEPIN 3 1+ : N.C.

SPEAKER ADAPTER CABLE 2-WIRE:XLR JACK MONOPIN 1 JACK CASING: GROUNDPIN 2 JACK TIP: +LIFEPIN 3 N.C.

SPEAKER CABLE 2-WIRE:JACK MONO JACK MONOJACK CASING JACK CASING: GROUNDJACK TIP JACK TIP: +LIFE

DMX512 CABLE 5-PIN FULLY ASSIGNED:(ACCORDING TO USITT1990)XLR 5-PIN XLR 5-PINPIN 1 PIN 1: GROUND/SHIELDPIN 2 PIN 2: DATA -1PIN 3 PIN 3: DATA +1PIN 4 PIN 4: DATA -2/RETURN CHANNELPIN 5 PIN 5: DATA +2/RETURN CHANNEL

DMX CABLE 5-PIN PARTIALLY ASSIGNED:XLR 5-PIN XLR 5-PINPIN 1 PIN 1: GROUND/SHIELDPIN 2 PIN 2: DATA -PIN 3 PIN 3: DATA +PIN 4 N.C.PIN 5 N.C.

DMX ADAPTER CABLE PARTIALLY ASSIGNED:(ACCORDING TO USITT1990)XLR 5-PIN XLR 3-PINPIN 1 PIN 1: GROUND/SHIELDPIN 2 PIN 2: DATA -PIN 3 PIN 3: DATA +PIN 4 N.C.PIN 5 N.C.

DMX CABLE 3-PINPARTIALLY ASSIGNED:(ACCORDING TO USIT1990)XLR 3-PIN XLR 3-PINPIN 1 PIN 1: GROUND/SHIELDPIN 2 PIN 2: DATA -PIN 3 PIN 3: DATA +

MIDI CABLE:DIN 5-PIN DIN 5-PINPIN 1 N.C.PIN 2 GROUND/SHIELDPIN 3 N.C.PIN 4 DATA +PIN 5 DATA -

Wiring diagrams SPEAKER CABLE

Wiring diagrams DMX CABLE / MIDI CABLE


25

26

28

29 30

1 8 15 22 29 36

7 14 21 28 35 42

Female Wiring Side

1 5 9 13 17 21

4 8 12 16 20 24

Female Wiring Side

Female Wiring Side A B C D

1

2

3

4

5

6

7

8

9

10

1 13 25 37 49 61

12 24 36 48 60 72

Female Wiring Side

1 1 5 9 2 13 17 21 3 2 6 10 4 14 18 22 5 3 7 11 6 15 19 23 7 4 8 12 8 16 20 24

1 1 2 3 2 4 5 6 3 7 8 9 4 10 11 12 5 13 14 15 6 16 17 18 7 19 20 21 8 22 23 24 9 25 26 27 10 28 29 30 11 31 32 33 12 34 35 36

1 1A 1B ∏ 2 1C 1D ∏ 3 2A 2B ∏ 4 2C 2D ∏ 5 3A 3B ∏ 6 3C 3D ∏ 7 4A 4B ∏ 8 4C 4D ∏ 9 5A 5B ∏ 10 5C 5D ∏ 11 6A 6B ∏ 12 6C 6D ∏

1 1 2 3 2 4 5 6 3 7 8 9 4 10 11 12 5 13 14 15 6 16 17 18 7 19 20 21 8 22 23 24 9 25 26 27 10 28 29 30 11 31 32 33 12 34 35 36

13 37 38 39 14 40 41 42 15 43 44 45 16 46 47 48 17 49 50 51 18 52 53 54 19 55 56 57 20 58 59 60 21 61 62 63 22 64 65 66 23 67 68 69 24 70 71 72

1 1 2 ∏ 2 3 4 ∏ 3 5 6 ∏ 4 7 8 ∏ 5 9 10 ∏ 6 11 12 ∏ 7 13 14 ∏ 8 15 16 ∏ 9 17 18 ∏ 10 19 20 ∏ 11 21 22 ∏ 12 23 24 ∏

13 25 26 ∏ 14 27 28 ∏ 15 29 30 ∏ 16 31 32 ∏ 17 33 34 ∏ 18 35 36 ∏ 19 37 38 ∏ 20 39 40 ∏ 21 41 42 ∏ 22 43 44 ∏ 23 45 46 ∏ 24 47 48 ∏

27

1 1A 2A 3A 2 4A 5A 6A 3 7A 8A 9A 4 1B 2B 3B 5 4B 5B 6B 6 7B 8B 9B 7 1C 2C 3C 8 4C 5C 6C 9 7C 8C 9C 10 1D 2D 3D 11 4D 5D 6D 12 7D 8D 9D n.c. 10A 10B 10C 10D


SUPP

ORT

SUPPORT

Wiring diagrams audio multipairs RECTANGULAR AUDIO CONNECTORS ILME

RECTANGULAR AUDIO CONNECTOR SYSTEMS 24-PINseparate grounding up to 8 channels

RECTANGULAR AUDIO CONNECTOR SYSTEMS 42-PINseparate grounding up to 12 channels

RECTANGULAR AUDIO CONNECTOR SYSTEMS 40-PINcentral grounding up to 12 channels

For inputs see chart.Returns starting with last pin:Return 1: Hot = 10A, Cold = 10B, Gnd = ∏Return 2: Hot = 10C, Cold = 10D, Gnd = ∏etc.

RECTANGULAR AUDIO CONNECTOR SYSTEMS 72-PINcentral grounding up to 24 channels separate grounding up to 24 channels

For inputs see chart. Returns starting with last pin:Return 1: Hot = 72, Cold = 71, Gnd = ∏Return 2: Hot = 70, Cold = 69, Gnd = ∏ ...etc.

Ch.No.

Hot+

Cold-

Gnd.(shield)

Ch.No.

Hot+

Cold-

Gnd.(shield)

Ch.No.

Hot+

Cold-

Gnd.(shield)

Ch.No.

Hot+

Cold-

Gnd.(shield)

Ch.No.

Hot+

Cold-

Gnd.(shield)

Ch.No.

Hot+

Cold-

Gnd.(shield)

Gnd.(shield)

Ch.No.

Hot+

Cold-

Option: separate grounding

Ch.No.

Hot+

Cold-

Gnd.(shield)


31 321 19 37 55 73 91

18 36 54 72 90 108

Female Wiring Side

1 1 2 ∏ 2 3 4 ∏ 3 5 6 ∏ 4 7 8 ∏ 5 9 10 ∏ 6 11 12 ∏ 7 13 14 ∏ 8 15 16 ∏ 9 17 18 ∏ 10 19 20 ∏ 11 21 22 ∏ 12 23 24 ∏ 13 25 26 ∏ 14 27 28 ∏ 15 29 30 ∏ 16 31 32 ∏ 17 33 34 ∏ 18 35 36 ∏ 19 37 38 ∏ 20 39 40 ∏ 21 41 42 ∏ 22 43 44 ∏ 23 45 46 ∏ 24 47 48 ∏

25 49 50 ∏ 26 51 52 ∏ 27 53 54 ∏ 28 55 56 ∏ 29 57 58 ∏ 30 59 60 ∏ 31 61 62 ∏ 32 63 64 ∏ 33 65 66 ∏ 34 67 68 ∏ 35 69 70 ∏ 36 71 72 ∏ 37 73 74 ∏ 38 75 76 ∏ 39 77 78 ∏ 40 79 80 ∏ 41 81 82 ∏ 42 83 84 ∏ 43 85 86 ∏ 44 87 88 ∏ 45 89 90 ∏ 46 91 92 ∏ 47 93 94 ∏ 48 95 96 ∏

1 1 2 3 2 4 5 6 3 7 8 9 4 10 11 12 5 13 14 15 6 16 17 18 7 19 20 21 8 22 23 24 9 25 26 27 10 28 29 30 11 31 32 33 12 34 35 36 13 37 38 39 14 40 41 42 15 43 44 45 16 46 47 48

17 49 50 51 18 52 53 54 19 55 56 57 20 58 59 60 21 61 62 63 22 64 65 66 23 67 68 69 24 70 71 72 25 73 74 75 26 76 77 78 27 79 80 81 28 82 83 84 29 85 86 87 30 88 89 90 31 91 92 93 32 94 95 96

ABC

10 9 8 7 6 5 4 3 2 1

e

Z Y X W

P N M L

D C B A

K J H F E

V U T S R

d c b a

f

hj

NN MM LL KK

JJ HH FF EE DD

CC BB AA z

t s r p

n m l k

y x w v u

33

34 35


SUPP

ORT

SUPPORT

RECTANGULAR AUDIO CONNECTOR SYSTEMS 108-PINcentral grounding up to 48 channels separate grounding up to 32 channels

For inputs see chart. Returns starting with last pin:Return 1: Hot = 108, Cold = 107, Gnd = ∏Return 2: Hot = 106, Cold = 105, Gnd = ∏ ... etc.

Ch.No.

Hot+

Cold-

Gnd.(shield)

Ch.No.

Hot+

Cold-

Gnd.(shield)

Ch.No.

Hot+

Cold-

Gnd.(shield)

Gnd.(shield)

Ch.No.

Hot+

Cold-

Ch.No.

Hot+

Cold–

Gnd.(shield)

1 1A 1B 1C2 2A 2B 2C3 3A 3B 3C4 4A 4B 4C5 5A 5B 5C6 6A 6B 6C7 7A 7B 7C8 8A 8B 8C9 9A 9B 9C

10 10A 10B 10C

Ch.No.

Hot+

Cold–

Gnd.(shield)

1 A E L2 B F M3 C J N4 D K P5 R W a6 S X b7 U Y c8 V Z d9 k p u

10 l r v11 m s x12 n t y13 z DD KK14 AA EE LL15 BB HH MM16 CC JJ NN

Female Wiring Side

Ch.No.

Hot+

Cold–

Gnd.(shield)

In 1 HH JJ NNIn 2 x y CCIn 3 m n tIn 4 LL MM FFIn 5 AA BB wIn 6 DD EE KKIn 7 u v zIn 8 k l pOut 1 d c ZOut 2 V U POut 3 K J DOut 4 N M TOut 5 C B HOut 6 b a WOut 7 S R LOut 8 F E A

Female Wiring Side

RECTANGULAR AUDIO CONNECTOR SYSTEMS 30-PINSeparate grounding up to 10-channel

RECTANGULAR AUDIO CONNECTOR SYSTEMS 56-PINSeparate gounding up to 16 channels– female (Neutrik assignment)

Support Wiring diagrams Audio multipairs RECTANGULAR AUDIO CONNECTORS SIEMENS TYPE MALE

Support Wiring diagrams Audio multipair RECTANGULAR AUDIO CONNECTORS EDAC

Separate grounding up to 16 channels – male (ADAT assignment)


R

T

RS

HG

F

E D C

B

A

22-23A

N

L

MK

90°

S

R

T

RS K L M N P Q

E F G H J

A B C D

R S T U V

W X Y Z

S

R

T

RS

S

A B C D

N P R S T U V W

h i j k m n p q r s

AC AD AE AF AH AJ AK AL AM AN

BB BC BD BE BF BH

BS BT BU BV

t u v w x y z AA AB

AP AR AS AT AU AV AW AX AY

BJ BK BL BM BN BP BR

X Y Z a b c d f g

E F H J K L M

BAAZ

R

T

RS Z X W V U T S

f e d c b a

m k j h g

s r p n

R P N M L K

J H G F E

D C B A

S

36

37

38

39

40


SUPP

ORT

SUPPORT

Support Wiring diagrams Audio multipairs ROUND AUDIO CONNECTOR SYSTEMS TOURLOCK

ROUND AUDIO CONNECTOR SYSTEMS 8-PINSpeaker signal up to 4 channels / arrangement 22 – 23 / contact size 12

Ch.No.

Hot+

Cold–

Gnd.(shield)

1 A E F2 G C B3 D H J4 M L K5 Q P N6 W S R7 T X Y8 Z V U

Ch.No.

Hot+

Cold–

Gnd.(shield)

1 A B C2 E F H3 J K L4 N P R5 S T U6 X Y Z7 a b c8 d f g9 h i j

10 k m n11 p q r12 t u v

Ch.No.

Hot+

Cold–

Gnd.(shield)

13 w x y14 z AA AB15 AC AD AE16 AF AH AJ17 AK AL AM18 AP AR AS19 AT AU AV20 AW AX AY21 AZ BA BB22 BC BD BE23 BJ BK BL24 BM BN BP

Female Wiring Side

Female Wiring Side

ROUND AUDIO CONNECTOR SYSTEMS 24-PIN/25-PINSeparate grounding up to 12 channels / 100 % shielding (PE)on Pin Z/arrangement 24 A – 25 / contact size 16

ROUND AUDIO CONNECTOR SYSTEMS 85-PINSeprate grounding up to 28 channels /arrangement 40 – 56 / contact size 16100 % shielding (PE) on Pin BV

Support Wiring diagrams Audio multipairs ROUND AUDIO CONNECTORS TOURLOCK

Ch.No.25+ BS25– BT25G BU26+ BF26– BH26G BR27+ M27– V27G W28+ D28– s28G AN

100% shielding: BV

Ch.No.

Hot+

Cold–

A 1B 1C 2D 2E 3F 3G 4H 4

Ch.No.

Hot+

Cold–

Gnd.(shield)

1 E F A2 B C G3 H J D4 S T K5 L M U6 V W N7 P R X8 a b g9 c d j

10 e f m11 n p h12 r s k

Female Wiring Side

ROUND AUDIO CONNECTOR SYSTEMS 37-PINSeparate grounding up to 12 channels /100 % shielding (PE)on Pin Z / arrangement 28 – 21 / contact size 16

Tourlock Standard:

Ch.No.

Hot+

Cold–

Gnd.(shield)

1 B A C2 E D F3 H G J4 L K M5 P N Q6 S R T7 V U W8 Y X Z

Camtec-Norm:

only available at 25-pin LK

ØA+0

–0.15

K±0.2

L±0.3

M+0.4–0

ØNmax.

R±0.1

S±0.3

TH13

37.3 4 34.5 19.6 31.6 32.0 41.7 3.5

ØA+0

–0.15

K±0.2

L±0.3

M+0.4–0

ØNmax.

R±0.1

S±0.3

TH13

40.9 4 35.7 20.6 35.3 34.9 44.5 3.7

ØA+0

–0.15

K±0.2

L±0.3

M+0.4–0

ØNmax.

R±0.1

S±0.3

TH13

65.5 4 37.3 22.2 59 55.6 69.8 4.3

ØA+0

–0.15

K±0.2

L±0.3

M+0.4–0

ØNmax.

R±0.1

S±0.3

TH13

46.7 4 35.7 20.6 41.4 39.7 50.8 3.7


R

T

RS

106

118129

139

146150

9381

6856

4331

4

20

101

5

1121

3244

5769

8294107

119130

140147

S

41

2 41 3 5 12 1311

1415

6 7 8 9 10

16 1718 19 20 21 22 232425

24 1351213 11

1415

678910

16171819202122232425

2 41 3 5 12 1311

1415

6 7 8 9 10

16 1718 19 20 21 22 232425

24 1351213 11

1415

678910

16171819202122232425

42

43


SUPP

ORT

SUPPORT

Ch.No.

Hot+

Cold–

Gnd.(shield)

1 1 2 32 5 6 73 8 9 104 11 12 135 14 15 166 17 18 197 21 22 238 24 25 269 27 28 29

10 20 30 3111 32 33 3412 35 36 3713 38 39 4014 41 42 4315 44 45 4616 47 48 4917 50 51 5218 53 54 5519 57 58 5920 60 61 6221 63 64 6522 66 67 6823 69 70 7124 72 73 74

Ch.No.

Hot+

Cold–

Gnd.(shield)

25 75 76 7726 78 79 8027 82 83 8428 85 86 8729 88 89 9030 91 92 9331 94 95 9632 97 98 9933 100 101 10234 103 104 10535 56 81 10636 107 108 10937 110 111 11238 113 114 11539 116 117 11840 119 120 12141 122 123 12442 125 126 12743 139 128 12944 130 131 13245 133 134 13546 136 137 13847 140 141 14248 143 144 145

ROUND AUDIO CONNECTOR SYSTEMS 150-PINSeparate grounding up to 48-channels /arrangement 40 A – 150 / contact size 18 / 100 % shielding (PE) on Pin 150

Wiring diagrams audio multipairs RECTANGULAR AUDIO CONNECTORS SUB-D 25-PIN

Male Wiring Side

RECTANGULAR AUDIO CONNECTOR SYSTEMS 25-PINseparate grounding up to 8 channels (standard Fostex, Tascam D-88)

Yamaha digital standard AES/EBUNot suitable for T-DIF!

Male Wiring Side

For crossover cable of course connect In 1/2 to Out 1/2, etc.!

Pin Signal1 In 1/2+2 In 3/4+3 In 5/6+4 In 7/8+5 Out 1/2+6 Out 3/4+7 Out 5/6+8 Out 7/8+9 Offen

10 GND11 Offen12 GND13 GND

Pin Signal14 In 1/2–15 In 3/4–16 In 5/6–17 In 7/8–18 Out 1/2–19 Out 3/4–20 Out 5/6–21 Out 7/8–22 GND23 GND24 GND25 GND

Ch.No.

Hot+

Cold–

Gnd.(shield)

1 24 12 252 10 23 113 21 9 224 7 20 85 18 6 196 4 17 57 15 3 168 1 14 2

Female Wiring Side

ØA+0

–0.15

K±0.2

L±0.3

M+0.4–0

ØNmax.

R±0.1

S±0.3

TH13

65.5 4 37.3 22.2 59 55.6 69.8 4.3


3

1 2

4C Y

24

13

6

7

8

59

1012

1311

14

15

16

17

18

19

20

crimp

crimp

24 135

1213 111415678910

44

45

46


SUPP

ORT

SUPPORT

ChannelHot

+Gnd.(shield)

Colorcode

Chrominance Signal C 4 2 redLuminance Signal Y 3 1 green

ROUND VIDEO CONNECTOR SYSTEMS 4-PIN Male Wiring Side

Wiring diagrams video multipairs ROUND VIDEO CONNECTORS S-VHS (MINI-DIN/HOSIDEN)

Female Wiring Side

RECTANGULAR VIDEO CONNECTOR SYSTEMS 20-PINoriginal standard (includes RGB-video)

Wiring diagrams video multipairs RECTANGULAR VIDEO CONNECTORS SCART

ChannelHot

+Gnd.(shield)

Audio Input Left 6 4Audio Input Right 2 4Video Input 20 18Audio Output Left 3 4Audio Output Right 1 4Video Output 19 17Video Input Red 15 13Video Input Green 11 9Video Input Blue 7 5Input blanking 16 18DC12V Signal from VCR 8 14Data-Line No. 1 12 14Data-Line No. 2 10 14

Male Wiring Side

RECTANGULAR VIDEO CONNECTOR SYSTEMS 15-PIN HDIBM PC video standard

The crimping plug consists of 3 individual parts, casing, pin for inner conductor, and sleeve.

Insulate the cable as recommended. You can find crimping and stripping tools in Chapter Plug Connectors BNC.

Guide the pin over the inner conductor and crimp it. Then guide the sleeve over the cable.

Now install the casing onto the plug. Then pull the sleeve from the back over the shielding up to the casing. Then crimp it into place.

BNC CRIMPING CONNECTOR ASSEMBLY INSTRUCTIONS

Wiring diagrams video multipairs RECTANGULAR VIDEO CONNECTORS SUB-D 15-PIN HD

Wiring diagrams BNC-assembly instructions BNC

Pin No. RGB-Signal (analog)

YCbCr-Signal

1 Red Cr2 Green or sync-on-green Y3 Blue Cb4 Ground5 Ground6 Red ground Cr-ground7 Green ground Y-ground8 Blue ground Cb-ground9 Not assigned

10 Sync-signal-ground11 SCART sync Sync12 Bi-directional DATA (SDA)*13 Horizontal sync or composite sync14 Vertical sync15 Data act*

Signal levelVideo signal: 0,7 Vp-p (analog)Sync signal: TTL level* only RGB 1 input


N L

L3 L2

N L1

1

2

3

4

5

6

7

8

9

10

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

47 48

49

50

7.4.

1.2.

5.7.

3.8.

6.6.

4.3.

1.2.

5.

8.


SUPP

ORT

SUPPORT

Female Wiring Side Female Wiring Side

Female Wiring Side

Female Wiring Side

RECTANG. LOAD CONNECTOR SYSTEMS 10-PINseparate grounding up to 5 channels

RECTANG. LOAD CONNECTOR SYSTEMS 16-PINseparate grounding up to 8 channels

ROUND LOAD CONNECTOR SYSTEMS 5-PIN CEE230/400V - 3p + N + ∏

ROUND LOAD CONNECTOR SYSTEMS 3-PIN CEE230V - p + N + ∏

Ch.No.

HotL

ColdN

Gnd.

1 1 6 ∏2 2 7 ∏3 3 8 ∏4 4 9 ∏5 5 10 ∏

Ch.No.

HotL

ColdN

Gnd.

1 1 9 ∏2 2 10 ∏3 3 11 ∏4 4 12 ∏5 5 13 ∏6 6 14 ∏7 7 15 ∏8 8 16 ∏

PhaseNo.

HotL

ColdN

Gnd.

1 L N ∏

Wiring diagrams load multicores RECTANGULAR LOAD CONNECTORS ILME, In compliance with DIN 15765

Wiring diagrams load multicores ROUND LOAD CONNECTORS CEE

PhaseNo.

HotL

ColdN

Gnd.

1 L1 N ∏2 L2 N ∏3 L3 N ∏

Support Multicore SPLICE LENGTHS

AUDIO

No. of channels Length Splice length

02 all 0.2 m

03 – 08 all 0.4 m

09 – 16 all 0.8 m

17 – 24 all 1.0 m

25 – 48 all 1.2 m

VIDEO


all to 3 m 0.2 m

to 3 m 0.4 m

HYBRID


Monolith

1 to 8 x audio all 0.4 m

Monocatall 0.4 m

Splice length 0.8 m

ATTENTION! THE GIVEN SPLICE-LENGTH INCLUDES THE CONNECTORS AND IS PART OF THE TOTAL CABLE LENGTH.

Total cable length 10 m


BOSNIA-HERZEGOVINA

Genel d.o.o.Kralja Tomislava 10988000 Mostar / Bosnia-HerzegovinaPhone: +387 36 320 777Fax: +387 36 320 [email protected]

BRAZIL

AudiosuporteRua. Cel. Adolfo Guimaraes 232CEP 82520-460Curitiba - Parana / BrazilPhone: +55 41 9603 [email protected]

BULGARIA

ZVUK OT ZAPADA LTDBenoit Vanderhaghen, Simeonovo, st.197 n.13Vitosha ParkSofi a 1434 / BulgariaPhone: +359 899 30 16 [email protected]

CAMBODIA

Pro-Feel Ltd.28. Street 608. Phnom Penh / Kingdom of CambodiaPhone: +855 (0)12 582 [email protected]

CAMEROON

DEBIT STOCK Cameroun PLATE-FORME COMMERCIALE675, Rue VaxnitexB.P. 2232, Bonapriso Douala / CameroonPhone: +237 997 51 15Fax: +237 343 49 [email protected]

CANADA

BHC Cable Assemblies Inc.2 Masonry CtBurlington, Ontario, L7T 4A8 / CanadaPhone: +1 905-634-1415Fax: +1 [email protected]

CHILE

Sonoaudios del Sur S.A.Eduardo Hyatt 541, ProvidenciaSantiago / ChilePhone: +56 2 6651745Fax: +56 2 [email protected]

CHILE/BOLIVIA/CUBA/PERU/HONDURAS

Estemac Electronic GmbHBrunnenkoppel 2422041 Hamburg / GermanyPhone: +49 (0) 40 610 609Fax: +49 (0) 40 610 [email protected]

CHINA

Belatech Trade CompanyDoris To / Risky SoWorkshop No. 10, 1F Cambridge Plaza188 San Wan Road, Sheung Shui. NTHong Kong / ChinaPhone: +852 81 010 [email protected]@belatech-trading.comwww.sommercable.com.hk

CHINA

Eastern Acoustic DevelopmentRm. 7, 6/F., Block B, Hi-Tech Industrial Centre, 491-501 Castle Peak Road, Tsuen Wan, N.T., Hong Kong / ChinaPhone: +852 24 90 21 21Fax: +852 27 28 21 69

COSTA RICA

Inresa de Costa Rica S.A.Av. Central Calle 29 y 33Cond. Dona Lolita, Bo. Escalante / San Jose - Costa Rica - C.A.Phone: +506 283-6400Fax: +506 [email protected]

CROATIA

Audio pro d.o.oRudeska 1410000 Zagreb / CroatiaPhone: +385 1 3880167Fax: +385 1 [email protected]

CROATIA

NOVA GLAZBALA D.O.O.Hondlova 2Zagreb 10 000 / CroatiaPhone: +385 1 2330 005Fax: +385 1 2330 [email protected]

CYPRUS

S&V MegaSound Ltd45 Stassinou Str., P.O.Box 161512086 Nicosia / CyprusPhone: +357 22 870 287Fax: +357 22 870 [email protected]

CZECHIA

MusicData s.r.oSokolovská 250594 01 Velké Meziříčí / CzechiaPhone: +420 (566) 521 370Fax: +420 (566) 521 [email protected]

DENMARK

Light Partner apsNr. Lindvej 307400 Herning / DenmarkPhone: +45 97 26 96 00Fax: +45 97 26 96 [email protected]

DENMARK

alfa audio a/sKlamsagervej 168230 Aabyhoj / DenmarkPhone: +45 7027 7300Fax: +45 8736 [email protected]

EGYPT

Waveburg AVL Middle East Sales Offi ce55 El-Hegaz St.El-Mohandseen, Cairo / EgyptPhone: +20 2 334 48 650Fax +20 2 330 47 [email protected]

ENGLAND

SOMMER CABLE GmbHHumboldtstrasse 32-3675334 Straubenhardt / GermanyPhone: +49 (0)7082 49133-0Fax: +49 (0)7082 49 [email protected]

ENGLAND

Impact Marketing Services Ltd.Neil Harris, Radway Green Business CentreCW25PR-Crewe (Cheshire) / Great BritainPhone: +44 (0)12 7088 3243Fax: +44 (0)12 7087 [email protected]/trade

ENGLAND

Studiospares Ltd.964 North Circular RoadSouthway HouseLondon NW2 7JR / Great BritainPhone: +44 (0) 2 082 089 932Fax: +44 (0) 2 084 504 [email protected]

ENGLAND

ADAM HALL LtdUnit 3, The Cordwainers, Temple Farm, Indutrial EstateSS2 5RU Southend-on-Sea, Essex / Great BritainPhone: +44 (0) 1702 61 39 22Fax: +44 (0) 1702 61 71 [email protected]

ESTONIA

ASD – Audio System Design LLCJalaka tee 6, Pringi külaViimsi vald74011 Harju maakond / EstoniaPhone +372 56 [email protected]

FINLAND

Qualitron OY AB Vitikka 402630 Espoo / FinlandPhone: +358 (0) 9 2 510 16-0Fax: +358 (0) 9 2 510 [email protected] www.qualitron.fi

FINLAND

msonic oyMikko PalomäkiKiitoradantie 1101530 Vantaa / FinlandPhone: +358 (0) 10 439 8800Mobil: +358 (0) 40 418 [email protected] www.msonic.fi

FRANCE

SOMMER CABLE115 rue de la république67720 Weyersheim / FrancePhone: +33 (0)3 88 / 51 87 34Fax: +33 (0)3 88 / 51 24 [email protected]

FRANCE

Audioprice 18 Rue du Terrage75010 Paris / FrancePhone: +33 (0) 142 829 829Fax: +33 (0) 146 077 [email protected]

FRANCE

La boutique du spectacle 17, rue Vergniaud75013 Paris / FrancePhone: +33 01 45 81 68 00Fax: +33 01 45 81 67 00www.la-bs.com

GREECE

Nick J. Laios SA 166, 3rd Septembriou Str.11251 Athens / GreecePhone: +30 210 86 29 513Fax: +30 210 86 55 102

GUATEMALA

Inresa, Ingenieria y Representaciones, S.A. 11 Av. 12-91, Zona 21002 Guatemala Ciudad / Guatemala - C.A.Phone: +502-222 8000Fax: +502-254 [email protected]

HONG KONG

Palonn (Allenlite) Production Eng. Co. Rm 429, Kowloon-Bay Ind. CenterKonloon Bay / Hong KongPhone: +852-28 863 999Fax: +852-27 711 [email protected]

HUNGARY

Peter Csendes Jzsef krt 66/81085 Budapest / HungaryPhone: +36 (0)309 478 [email protected]

HUNGARY

MediaDot Kft Kismarton u. 10.2120 Dunakeszi / HungaryPhone: [email protected]

ICELAND

ID Electronic ehf Grensásvegur 12108 Reykjavík / IcelandPhone: +354 553 3050Fax: +354 553 [email protected]

INDIA

S.U.N. Media Ventures PVT LTD 1, Gnd Floor, Krishna Kunj, Ashok Nagar, Cross Road No. 3Kandivli (E) Mumbai-400 101 / IndiaPhone: +91 (022) 288 437 72Fax: +91 (022) 288 415 [email protected]

IRAN

Fara Sout Negar Co. No. 12-Nofel Lo Shato St - Ferdowsi St1131686614 Tehran / IranPhone: +98 21 66 72 33 80Fax: +98 21 66 72 52 [email protected]

IRAQ

Future Art Broadcast Trading Ltd. Contact person: Hadi A. MousaDist. 102, St. 9, Bldg. 12, Sa‘adoon St.Baghdad / IraqPhone: +964 1 8188959Fax: +964 1 [email protected]

IRELAND

AV TEC CorgarBallinamore, Leitrim / IrelandPhone: +353 71 96 11155Fax: +353 71 91 [email protected]

IRELAND

Altec Distribution William StreetCashel, County Tipperary / IrelandPhone: +353 878 38 50 70Fax: +353 626 32 [email protected]

ISRAEL

Sontronics, Electronic Equipment Ltd. 2 Bin Nun Street51400 Bnei Brak / IsraelPhone: +972 3 570 5223Fax: +972 3 619 [email protected]

ISRAEL

Music Center Ltd. 20 Freiman St.75358 Rishon Le-Zion / IsraelPhone: +972 3 956 17 40Fax: +972 3 967 51 [email protected]

AFRICA

HIGHWAY COMMUNICATIONS LIMITED3A, Kudirat Abiola Way, (Opposite Mobil Filling Station) OregunIkeja, Lagos / NigeriaPhone: +234 (1) 4392001Fax: +234 (1) 255 [email protected]

ALGERIA

EuroWorldTec E.U.R.L.01 Boulevard Stiti AliDZ -15000 Tizi-Ouzou / AlgeriaPhone: +213 26 20 05 18Fax: +213 26 20 05 19www.euroworldtec.com

ALGERIA

115 rue de la république67720 Weyersheim / FrancePhone: +33 (0)3 88 / 51 87 34Fax: +33 (0)3 88 / 51 24 [email protected]

U.S.A.

Lava CableSOMMER CABLEHumboldtstrasse 32-3675334 Straubenhardt / GermanyPhone: +49 (0)7082 49133-0Fax: +49 (0)7082 49 [email protected]

U.S.A.

GP2 Inc.P.O. box 5873, Santa Monica, California 90409 / USAPhone: +1 877-GP2-9777Fax: +1 [email protected]

ARMENIA

„G&S Music“ LTDIra KhanamiryanAvan 3/2, Duryan 37/17PO 375044Yerevan / ArmeniaPhone: +37410 [email protected]

ARMENIA

L.S. DESIGN LLCAmiryan str. 10010 Yerevan / Armenia Phone: +37499239373Phone: [email protected]

AUSTRIA

Wien Schall Ges.mbHNordbahnstrasse 201020 Wien / AustriaPhone: + 43 (0)1 811 55-100Fax: + 43 (0)1 811 [email protected]

AUSTRALIA

Top-notch Guitar & BassBernie JochumPO Box 1441Broadbeach Qld 4218 / AustraliaPhone: +61 (0) 418768236Fax: +61 (0) 7 55944024bernie@topnotchguitarandbass.comwww.topnotchguitarandbass.com

AZERBAIJAN

Allstaraz36 Inshaatchilar Ave.370065, Baku / AzerbaijanPhone: +994 12 4932863Fax: +994 12 4932863www.allstaraz.com

AZERBAIJAN

Promix Company15, M.H.Nakhchivani str.,AZ1009, Baku / AzerbaijanPhone: (+99412) 437 56 05 Fax: (+99412) 436 78 62offi [email protected]

BELARUS

Art Ramos Studio a.l.c.4-th Zagorodny 58-b220076 Minsk / BelarusPhone: +375 17 2 04 61 80Fax: +375 17 2 56 23 [email protected]

BELGIUM

BELRAM sa/nvChaussée de Wavre 16001160 Bruxelles / BelgiumPhone: +32 2 672 95 90Fax: +32 2 672 84 [email protected]

BOSNIA

Artist d.o.oI.G.Kovacica 203A 78000 Banjaluka / BosniaPhone: +387 51 371 977Fax: +387 51 371 [email protected]

DIST

RIBU

TORS

DISTRIBUTORS

Music Industry Pro Audio/Video Installation Market

The following addresses are authorised SOMMER CABLE distributors. These distributors guarantee you as our customer in their respective industry

an area-wide, fast delivery and a professional support.

In case your business is not listed for your country on this list, please send your inquiry to [email protected]. We will promptly get in touch with you.


ITALY

SOMMER CABLE GmbH Humboldtstrasse 32-3675334 Straubenhardt / GermanyPhone: +49 (0)7082 49133-0Fax: +49 (0)7082 49 [email protected] ITALY

Digicom Sas / K.G., Distribuzioni e Rappresentanze industriali sede legale via Mendola 93 B / uffi ci Via Dürer 39100 Bolzano / ItalyPhone: +39 0471/633080Fax: +39 0471/[email protected]

JAPAN

Graphica Inc. 421-1 Tatsumi Okayama700-0976 / JapanPhone: +81 86-242-5105Fax: +81 [email protected]

JORDAN

Yousef & Ibrahem Shehadeh Company (AVTEC) P.O.Box:144854 Amman 11814 Jordan, Amman-JordanBayader Wadi Alseer-Aljandaweel, 4- Taleb Alfuqha St. / JordanPhone: +962-6-5864018Fax: +962-6-5864019www.avtecjo.com

KAZAKHSTAN

Show Service Ltd. Shevchenko 76, Str.480050 Almaty / KazakhstanPhone: +7 3272 61 52 52Fax: +7 3272 61 77 [email protected]

KENYA

Sound Creations Ltd. Mpaka House, Mpaka Road, WestlandsNairobi / KenyaPhone: +254 20 4452205Fax: +254 20 [email protected]

KOREA

Sound Solution Co., Ltd. #201, Ace High-Tech City 4-dong, 55-20 Mullaedong 3-ga, Yeongdeungpo-gu,Seoul, 150-835 KoreaPhone: +822 2168 4510Fax: +822 2168 [email protected]

KYRGYZSTAN

KYRGYZSTAN, BISHKEK Sovetskaya St. 3BC Aberon, Offi ce 77 / KyrgyzstanPhone: +996 555 781 816Fax: +996 555 781 816

LATVIA

Muzikala Dizaina Grupa, SIA F. Sadovnikova 21-603LV-1003 Riga / LatviaPhone: +371 6727 4920Fax: +371 6727 [email protected]

LEBANON

Sounds Inc. BeirutSalamoun Bldg.Cairo Street - P.P. Box 113-5499Hamra, Beirut / LebanonPhone: +961-1-353351Fax: [email protected]

LITHUANIA

Ogmios Pulsas Pro Ltd. P. Luksio str. 23LT -09132 Vilnius / LithuaniaPhone: +370 52 741 726Fax: +370 52 741 [email protected]

LUXEMBOURG

BELRAM nv/sa Chaussée de Wavre 1600Bruxelles 1160 Brussel / BelgiumPhone: +32 2 672 95 90Fax: +32 2 672 84 [email protected]

LUXEMBOURG

SIPEL Sàrl 42, ZAE Le Triangle Vert5691 Ellange-Mondorf / LuxembourgPhone: +352 31 66 60-1Fax: +352 31 66 [email protected]

MACEDONIA

Artist d.o.o.e.l. Bul Marks i Engels 11000 Skopje / MacedoniaPhone: +389 2 321 66 40Fax: +389 2 321 66 78 [email protected]

MALAYSIA

SCA World Connection Sdn Bhd28, Jalan 15A/142, Taman Orkid Desa,56000 CherasKuala Lumpur / MalaysiaPhone: +603 - 89 42 60 36Fax: +603 - 89 42 60 [email protected]

MALTA

Studio 7 Co. LtdStudio 7 Complex, Victory StreetM - BKR2693 Birkirkara / MaltaPhone: +356 2144 7887 / 8Fax: +356 2144 [email protected]

MAROCCO


MAROCCO

PHF COM Maroc65, Bd. Al Massira Al Khadra20100 Casablanca / MarocPhone: +212 522 473 185Fax: +212 522 473 382www.phfcom.com

MARTINIQUE

Musique et Son ZI les mangles97232 Lamentin / MartiniquePhone: +33 596 42 68 60Fax: +33 596 42 68 [email protected]

MAURITIUS

Enterprise Data Services 24 Dr. Roux Street, Rose-Hill / Republic of MauritiusPhone: (+230) 465 1700Fax: (+230) 465 [email protected]

MEXICO

DiuXi SA de CV Miguel Angel of QuevedoIndiana 42 Despacho 4, Colonia NapolesMEX-03810 / México DF, MéxicoPhone: +52 55 5641 5293Fax: +52 55 5641 [email protected]

NETHERLANDS

Audio Pro Nederland B.V. Westhavenweg 1171042 BB Amsterdam / NetherlandsPhone: +31 20 613 15 21Fax: +31 20 613 16 [email protected]

NETHERLANDS

AD-Systems BV Junostraat 26468 EW Kerkrade / NetherlandsPhone: +31 (0)455 468 517Fax: +31 (0)455 468 [email protected]

NETHERLANDS

Michel Huizing Tugerallee 557041 GH s-Heerenberg / NetherlandsPhone: +31 314 [email protected]

NEW ZEALAND

Livesound Manufacturing Ltd. P.O.Box 68216 Newton 34, Crummer Rd Grey Lynn, Auckland / New ZealandPhone: +64 (0)93 78 98 63Fax: +64 (0)93 78 05 [email protected]

NIGERIA

HIGHWAY COMMUNICATIONS LTD 3A, Kudirat Abiola Way, (Opposite Mobil Filling Station) OregunIkeja, Lagos / Nigeria, West AfricaPhone: +234 (1) 4 392 00-3, -4Fax: +234 (1) 2 557 [email protected]

NIGERIA + GHANA

Present Sounds Nigeria Limited plot 3a, yetunde owoseni close off bello folawiyocrescent. ikosi ketu G.R.A Behind mr biggs lagos / NigeriaPhone: +234 (1) 853 30 66Mobile: +234 80 2363 [email protected]

NORWAY

Multitechnic AS Caspar Storms vei 120664 Oslo / NorwayPhone: +47 22 09 17 00Fax: +47 22 09 17 [email protected]

PHILIPPINES

Eleksis Service Center Unit 2, 2/F Home Studio Building63 Connecticut St., Northeast Greenhills, San Juan City, Metro Manila 1500 / PhilippinesPhone: +63 2 570-7353Fax: +63 2 725-9392www.eleksis.com

POLAND

Show Design ul. Prusicka 3155-100 Trzebnica / PolandPhone: +48 (0)71 387 44 34Fax: +48 (0)71 387 44 [email protected]

POLAND

SONO LOGIC ul. Kossaka 1776-100 Slawno / PolandPhone: +48 (0)71 7336 844Fax: +48 (0)71 7336 [email protected]

PORTUGAL

Alrica LDA R.Vale Formosa de Cima no. 125BP 1950-2-66 Lisboa / PortugalPhone: +351 21 83 94 77-0Fax: +351 21 83 94 [email protected]

ROMANIA

Eltek Distribution SRL 1/II Pipera-Tunari Street077190 - Voluntari, Ilfov / RomaniaPhone: +40 (021)200 64 64Fax: +40 (021)200 64 [email protected] www.eltek.ro

ROMANIA

Acoustics LIVEAUDIO SRL Iancu Jianu 33315400 - Lipova Arad / RomaniaPhone: +40 722 87 67 [email protected]

RUSSIA

2nd Chernogrjazskaja Street 6123100 Moscow / RussiaPhone: +7 (495) 780-51-70Fax: +7 (495) [email protected]

SAUDI ARABIA

Media Factory Key Wael ZakiSultan StreetJeddah / Saudi ArabiaPhone: +966 504 370 347Fax: +966 268 241 [email protected]

SCOTLAND

Phase 3 UK Limited Unit 14, Fife Business Centre, Faraday RoadSouthfi eld Industrial Estate, Glenrothes, Fife, KY6 2RU / ScotlandPhone: +44 (0) 15 92 77 59 95 Fax: + 44 (0) 15 92 77 59 96

S SERBIA, MONTENEGRO & BOSNIA HERZEGOWINA

Studio Berar Kosovska 3321000 Novi Sad / SerbiaPhone: +381 21 4720 556Fax: +381 21 553 [email protected]

SINGAPORE

SCA World Connection Sdn Bhd 28, Jalan 15A/142, Taman Orkid Desa,56000 CherasKuala Lumpur / Malaysia Phone: +603 - 89 42 60 36Fax: +603 - 89 42 60 [email protected]

SINGAPORE

Consolidated Audio Networks Pte Ltd. No. 48 Mactaggart Road #03-03 MAE Industrial BuildingSingapore 368088Phone: +65 6287 8038Fax: +65 6287 [email protected]

SLOVAKIA

TM Sound s.r.o. Poštová 2SK-01008 Žilina / SlovakiaPhone: +421 412 028 908Mobile: +421 905 170 [email protected]

SLOVENIA

Telma Trade d.o.o. Motnica 131236 Trzin / SloveniaPhone: +386 (0) 1562 [email protected]

SOUTHERN AFRICA

Broadcast Lines – Johannesburg 298 Samantha Street, Strijdom Park,Randburg, Johannesburg 2169 / South AfricaPhone: +27 (0)11 792-1451Fax: +27 (0)11 [email protected]

Broadcast Lines, Cape Town Phone: +27 (0)22 451 2754Fax: +27 (0)22 451 [email protected]

SOUTH AFRICA, ANGOLA, BOTSWANA, LESOTHO, MOZAMBIQUE, NAMIBIA, SWAZILAND, ZIMBABWE, ZAMBIA, MALAWI, KENYA

Stage Audio Works 4 Standard Close, Strijdompark, Randburg, 2194JohannesburgSouth AfricaPhone: SA 0861 6888 68Phone: Intl. +27 (0) 11 791 7829 Fax: +27 (0) 11 791 [email protected]

SPAIN

Essential Elements S.A. (STIL BOX), Pol. Ind. Fondo d‘en Peixo C/ Penedés, 3408820 El Prat de Llobregat (Barcelona) / SpainPhone: +34 93 431 17 77Fax: +34 93 379 90 [email protected]

SRI LANKA

THE HI-FI CENTRE LTD 300, R.A.de mel MawathaColombo 3 / Sri LankaPhone: +94 11 23 722 28Fax: +94 11 25 734 70hifi @eureka.lk

STATE OF KUWAIT

Our Style Sound Systems Center Contact person: Mr. Riad Al-LahoP.O. Box 5426Al-Safat 13055 / KuwaitMobile: +965-99 721 696Fax: +965-24 339 616 [email protected]

SULTANATE OF OMAN

SULEYUM AL KIYUMI TRADING LLC P.O. Box: 1300, RuwiPostal code: 112 / Sultanate of OmanPhone: +968 24 750 205Fax: +968 24 789 [email protected]

SWEDEN

Arva Trading AB Industrivägen 1417148 Solna / SwedenPhone: +46 8 470 58 10Fax: +46 8 470 58 80

SWITZERLAND

Show Supply GmbH Schachenallee 295000 Aarau / SwitzerlandPhone: +41-62 832 70 00Fax: +41-62 832 70 [email protected]

THAILAND

DSE CO., LTD. 9/43 Soi Rachadapisek 42, Rachadapisek RoadChandrakasem, Chatujak,Bangkok 10900 / ThailandPhone: +66 (0) 2930 6500Fax: +66 (0) 2930 [email protected]

TUNISIA


TURKEY

Mikafon Elektronik Ins.San.Tic.Ltd.Sti. Bankalar Sair Ziya Cad. No.8/134420 Karaköy-Istanbul / TurkeyPhone: +90.212.2445177 (pbx)Fax: [email protected] www.mikafon.com.tr

TURKEY

Armada Ses Isik GoruntuSistemleri San.Tic.Ltd. Hamidiye Mah. Dilaver Sok. No: 6KagithaneIstanbul / Turkey ZIP: 34408Phone: + 90 212 2 95 9730Fax: +90 212 2 955 [email protected]

UKRAINE

Forte Blues, LTD Y.Samarskogo 12/7 str.49000, Dnepropetrovsk / UkrainePhone: +38 (0) 562-362-822Fax: +38 (0) [email protected]

UNITED ARAB EMIRATES

DUTCO Tennant LLC. Business Technology Solutions Viju JoseAl Nakheel Street, P.O.Box 233UAE - Deira, Dubai / United Arab EmiratesPhone: +9714-22 20 186Fax: +9714-22 36 [email protected]

DIST

RIBU

TORS

DISTRIBUTORS


Company

Dept./osition

Name

First name

Street

CUSTOMER-NO.

Fax :+49 (0) 70 82 / 4 91 33 -11

Order via phone: +49(0)70 82/4 91 33-0

Order via eMail: [email protected]

Zip code, city/town

Phone

Fax

eMail

Date

Signature

THE BOXX (floor stagebox) max. LK37 Plug Mama (floor stagebox) max. LK37 19“ casing (for rack assembly) max. LK150 inputs: outputs:

rectang. MP straight male female rectang. MP angled male female round MP (LK) male female no = cable fixed to stagebox

rectang. MP straight male female rectang. MP socket casing male female round MP (LK) male female round MP socket casing male female no = no separation at splice

Plug connectorsINPUT/ XLR male pcs.SEND: XLR female pcs. (standard)

jack stereo pcs.

OUTPUT/ XLR male pcs. (standard)RETURN: XLR female pcs.

jack stereo pcs.

jack mono pcs.

OTHERS: pcs.

Plug connectors

XLR male pcs.

XLR female pcs.

jack stereo pcs.

jack mono pcs.

others pcs.

Plug connectors

XLR male pcs.

XLR female pcs..

jack stereo pcs..

jack mono pcs.

others pcs.

Standard splice length 0.8 m on both sides

Plug connectorsINPUT: XLR male pcs.

XLR female pcs. (standard)

jack stereo pcs.

OUTPUT: XLR male pcs. (standard)

XLR female pcs.

jack stereo pcs.

jack mono pcs.

OTHERS: pcs.

central grounding* (standard rectang. MP) separate grounding* (standard round MP) (each wire + grounding has own pin) If the assignments are different, please fax us the Wiring Diagram. with transformer 1:1 1:1+1 1:1+1 Lundahl cable wound on drum

* Standard assignments can be found under www.sommercable.com

Looms

I N Q U I R Y F O R M

cable wound on drum

rectang. MP straight male female rectang. MP angled male female round MP (LK) male female

Stagebox systems

loom length: m

channels splice length: m

multicore length: m

length: m

splice length: m*

* Info: Standard splice length: 1.2 m – starting at 24 channels: 1.5 m

INQUIRY FORM

Refresh Your Connections !Refresh Your Connections !

www.hicon-hifi.com

– A Division of

HiFi Bulk Cables

Premade HiFi- & Home-Cinema Cables

High Quality Connectors

2012

-01

ww

w.e

igen

-art

s.de

Your authorized SOMMER CABLE dealer:

SOMMER CABLE GMBHHead Office Germany

Humboldtstrasse 32 - 3675334 Straubenhardt / Germany

Phone / Sales +49 (0) 70 82/4 91 33 - 0 Phone / techn. Support +49 (0) 70 82/4 91 33 - 10Fax +49 (0) 70 82/4 91 33 - 11

[email protected]

This catalogue is available in

English

German

French

Spanish (v2010)

Bulk Cables

PreMade Cables

Connectors

Audio- & Video Distribution Systems

Modular Installation- & Stage Systems

Active Components

PA-Systems

Mechanics & Accessories

OEM Manufacturing

Your authorized Your authorized SOMMER SOMMER CABLECABLE dealer: dealer:CABLECABLE dealer:CABLECABLE

Sommer Cable Catalog Deel 4 - Modular Syst. + Active Components + Mechanics & Accessories

Documents