www.njctl.org PSI AP Chemistry Solutions Solutions: Multiple Choice Review PSI AP Chemistry Name ________________________ Part A: Mixtures, Solubility, and Concentration 1. Which of the following would be FALSE regarding mixtures? (A) Mixtures do not obey the law of definite composition. (B) Mixtures are composed of only two pure substances. (C) Mixtures can be separated by physical methods. (D) Solutions, suspensions, and colloids are all considered mixtures. (E) None of these are false. 2. Identify the type of mixture of substances X, Y and Z based on the following data. Substance X Substance Y Substance Z Particle size 0.5nm 2000nm 500nm Settling of particles No Yes No Homogenous Yes No Yes Tyndall Effect No Yes Yes (A) X = suspension, Y= colloid, Z = solution (B) X = colloid, Y = solutions, Z = suspension (C) X = solution, Y = suspension, Z = colloid (D) X = colloid, Y = suspension, Z = solution 3. Which of the following physical methods is often employed to separate a solution? I. Distillation II. Filtration III. Evaporation (A) I only (B) II only (C) III only (D) I and II only (E) I and III only 4. Which of the following is FALSE regarding a suspension? (A) Suspensions have larger particles than solutions. (B) Solutions cannot be separated by filtration. (C) A sample of a suspension will not be uniform in composition. (D) Suspensions have smaller particles than colloids. (E) Solutions demonstrate the Tyndall effect.
13
Embed
Solutions: Multiple Choice Review Part A: Mixtures ...content.njctl.org/courses/science/ap-chemistry/solutions/solutions...Solutions: Multiple Choice Review ... Part A: Mixtures, Solubility,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
www.njctl.org PSI AP Chemistry Solutions
Solutions: Multiple Choice Review PSI AP Chemistry Name ________________________ Part A: Mixtures, Solubility, and Concentration
1. Which of the following would be FALSE regarding mixtures?
(A) Mixtures do not obey the law of definite composition. (B) Mixtures are composed of only two pure substances. (C) Mixtures can be separated by physical methods. (D) Solutions, suspensions, and colloids are all considered mixtures. (E) None of these are false.
2. Identify the type of mixture of substances X, Y and Z based on the following data.
Substance X Substance Y Substance Z
Particle size 0.5nm 2000nm 500nm Settling of particles No Yes No
Homogenous Yes No Yes Tyndall Effect No Yes Yes
(A) X = suspension, Y= colloid, Z = solution (B) X = colloid, Y = solutions, Z = suspension (C) X = solution, Y = suspension, Z = colloid (D) X = colloid, Y = suspension, Z = solution
3. Which of the following physical methods is often employed to separate a solution?
I. Distillation II. Filtration
III. Evaporation
(A) I only (B) II only (C) III only (D) I and II only (E) I and III only
4. Which of the following is FALSE regarding a suspension?
(A) Suspensions have larger particles than solutions. (B) Solutions cannot be separated by filtration. (C) A sample of a suspension will not be uniform in composition. (D) Suspensions have smaller particles than colloids. (E) Solutions demonstrate the Tyndall effect.
5. A mixture of crystals of salt and sugar is added to water and stirred until all solids have dissolved. Which statement best describes the resulting mixture?
(A) The mixture is homogeneous and can be separated by filtration. (B) The mixture is homogeneous and cannot be separated by filtration. (C) The mixture is heterogeneous and can be separated by filtration. (D) The mixture is heterogeneous and cannot be separated by filtration.
6. The phrase "like dissolves like" refers to the fact that ____________.
(A) gases can only dissolve other gases (B) polar solvents dissolve polar solutes and nonpolar solvents dissolve nonpolar
solutes (C) solvents can only dissolve solutes of similar molar mass (D) condensed phases can only dissolve other condensed phases (E) polar solvents dissolve nonpolar solutes and vice versa
7. Ionic solids will most likely dissolve in
(A) H2O(l), which is a polar solvent (B) H2O(l), which is a nonpolar solvent (C) CCl4(l), which is a polar solid (D) CCl4(l), which is a nonpolar solvent
8. Of the following, ____________ should be immiscible with carbon tetrachloride, CCl4.
(A) C6H14 (B) Br2 (C) CH3CH2OH (D) C3H8 (E) I2
9. Which one of the following substances is more likely to dissolve in benzene (C6H6)?
(A) CH3CH2OH (B) NH3 (C) NaCl (D) CCl4 (E) HBr
10. Which one of the following is most soluble in water?
16. A saturated solution __________. (A) contains as much solvent as it can hold (B) contains no double bonds (C) contains dissolved solute in equilibrium with undissolved solute (D) will rapidly precipitate if a seed crystal is added (E) cannot be attained
17. An unsaturated solution is one that __________.
(A) has no double bonds (B) contains the maximum concentration of solute possible, and is in equilibrium
with undissolved solute (C) has a concentration lower than the solubility (D) contains more dissolved solute than the solubility allows (E) contains no solute
18. Which procedure will increases the solubility of KCl in water?
(A) stirring the solute and solvent mixture (B) increasing the surface area of the solute (C) raising the temperature of the solvent (D) increasing the pressure on the surface of the solvent
19. The curve to the right best represents the solubility curve for...
(A) LiBr (B) C6H6
(C) NH3
(D) NaI (E) None of these
20. The bottler of a carbonated beverage dissolves carbon dioxide in water by placing carbon dioxide in contact with water at a pressure of 1 atm at room temperafure. The best way to increase the amount of dissolved CO2, would be to (A) increase the temperafure and increase the pressure of CO2. (B) decrease the temperature and decrease the pressure of CO2. (C) increase the temperature without changing the pressure of CO2. (D) decrease the temperature and increase the pressure of CO2. (E) increase the pressure of CO2 without changing the temperature.
21. How many moles of KNO3 would dissolve in a saturated solution containing 200 g of water @25 C. Assume the solubility of KNO3 is 40.0 g/100 g water @25 C.
23. A sample of potassium nitrate (49.0 g) is dissolved in 101 g of water at 100 °C, with precautions taken to avoid evaporation of any water. The solution is cooled to 30.0 °C and no precipitate is observed. This solution is __________. (A) hydrated (B) placated (C) saturated (D) unsaturated (E) supersaturated
24. What is the molarity of an aqueos KNO3 solution @ 25oC assuming a solubility of 40
g KNO3/100 g H20. Assume a density of 1g/mL solution.
(A) 0.00396 M (B) 0.396 M (C) 3.96 M (D) 0.400 M (E) 40.4 M
25. An aqueous solution of ethanol, C2H5OH, is 19.00% ethanol by mass and has a
density of 0.9700 g/mL. Calculate the molality of the ethanol solution.
(A) 4.000 m (B) 4.124 m (C) 4.252 m (D) 5.092 m (E) 14.48 m
26. Consider a 0.900 M Al(NO3)3 solution. This solution has a nitrate ion concentration
of:
(A) 0.300 M (B) 0.900 M (C) 2.70 M (D) 3.60 M (E) 8.10 M
32. What is the mole fraction of an aqueos 100 mL solution that is 0.10 M NaCl. Assume the density of the solution hnis 1.0 g/mL
(A) 6.12 (B) 0.585 (C) 5.12 (D) 0.050 (E) 0.96
Part B: Formation and Properties
33. Which of the following is true regarding the soltution formation process. (A) Interolecular forces between the solute particles must weaken in which the
enthalpy change is exothermic (-) (B) Intermolecular forces between the solvent molecules must weaken in which the
enthalpy change is exothermic (-) (C) New coulombic attractions between the solute and solvent form in which the
enthalpy change is (-) (D) Covalent bonds within the solute and solvent molecules must be broken (E) None of the above
34. Which of the following is NOT true regarding the heat of solution for a dissolution
process? (A) The formation of hydrogen bonds between solutes and solvents release large
amounts of energy when formed (B) Ideal solution have a heat of solution equal to zero (C) An endothermic dissolution process becomes more favorable as the temperature
increases (D) An exothermic dissolution process becomes more favorable as the temperature
increases (E) None of the above
35. In an aqueous solution of an ionic salt, the oxygen atom of the water molecule is
attracted to the (A) negative ion of the salt, due to oxygen’s partial positive charge (B) negative ion of the salt, due to oxygen’s partial negative charge (C) positive ion of the salt, due to oxygen’s partial positive charge (D) positive ion of the salt, due to oxygen’s partial negative charge
36. In aqueous solution, a chloride ion is attracted to which end of the water molecule? (A) the hydrogen end, which is the partial positive pole (B) the hydrogen end, which is the partial negative pole (C) the oxygen end, which is the partial positive pole (D) the oxygen end, which is the partial negative pole
37. A sample of 10.6 g of KNO3 was dissolved in 251.0 g of water at 25oC. The final
temperature of the solution was 21.5oC. What is the molar heat of solution of KNO3? Assume the specific heat of the solution is 4.2 J/.
38. The ΔH for the solution process when solid sodium hydroxide dissolves in water is
44.4 kJ/mol. When a 10.1-g sample of NaOH dissolves in 250.0 g of water in a coffee-cup calorimeter, the temperature increases from 23.0 °C to __________°C. Assume that the solution has the same specific heat as liquid water, i.e., 4.18 J/g-K.
(A) 33.3 (B) 35.2 (C) 24.0 (D) 33.7 (E) 40.2
39. Which of the following is not a strong electrolyte?
(A) KNO3 (B) NaClO4 (C) CH3CO2H (D) KCl (E) MgSO4
40. A 0.100 m solution of which one of the following solutes will have the greatest
46. Which of the following aqueous solutions will have the highest boiling point?
(A) 0.10 m Na2SO4 (B) 0.20 m glucose (C) 0.25 m sucrose (D) 0.10 m NaCl (E) 0.10 m SrSO4
47. What would be the freezing point of a 120 mL solution of 0.60 M Ca(NO3)2? Assume
a Kb of 01.86 C/m for water and a density of the solution of 1.01 g/mL. The molal freezing point depression constant for water is 1.86 0C/m. (A) -3.32 (B) -1.11 (C) 3.32 (D) 1.11 (E) 0.00
48. What is the boiling point change for a solution containing 0.328 moles of
naphthalene (a nonvolatile, non-ionizing compound) in 250. g of liquid benzene? (Kb= 2.53°C/m for benzene)
49. What is the boiling point of a 2 m solution of NaCl in water? (The boiling point
elevation constant, kb, for water is 0.51oC/m) (A) 100 oC (B) 101 oC (C) 102 oC (D) 103 oC (E) 104 oC
50. A solution, which was made by dissolving 62.07 g of a nonelectrolyte in 500 g of
water, exhibits a freezing point of -1.86 °C. What is the molecular weight of this nonelectrolyte compound? For water, Kf is 1.86 °C/ m and Kb is 0.51 °C /m.
(A) 57.7 g mol-1 (B) 124 g mol-1 (C) 62.07 g mol-1 (D) 115 g mol-1 (E) 231 g mol-1