Ref. No ME 038 - 01/04 JE The data contained herein are intended as reference only. Please contact your local Henkel Loctite Technical Support Group for assistance and recommendation on specifications for these products. 10 0 20 30 40 50 60 70 80 90 100 110 120 130 140 150 160 170 180 190 200 210 220 in cm 230 240 250 260 270 280 290 Fifty years of success and commitment to research and development has made Henkel Loctite one of the world’s leading global brands, with a depth and diversity of product solutions that is second to none. Our products exemplify our market-led approach of quickly responding to customers’ needs. When you have a Bonding, Threadlocking, Sealing or Gasketing requirement then look no further than the Henkel Loc- tite range to find the perfect answer. If you want industrial lubricants and Anti-Seize products, surface pre- paration and rust prevention solutions, fibre or metal-based fillers and repair compounds – or just need a cleaning product – then Henkel Loctite has the appropriate solution. Our continuing programme of introducing new and improved technology – such as our range of innovative “stick” products for some of the Threadlocking, Sealant, and Anti-Seize formulations - is the living proof that we listen and respond to our customers and the market’s needs. They’re just a part of our portfolio of success – a success based on leadership, technology and innovation. Equally important is our local distributor network, with the knowledge and capability to quickly and effi- ciently deliver the right products for your application. Henkel Loctite sets high standards for its distributors and works closely with them to ensure they can supply the products you need – on time, every time. In over 80 countries worldwide Henkel Loctite technology products - designed and manufactured to the highest standards - ensure that our customers remain ahead of their needs and on top of their game. For more information on the complete range of Henkel Loctite products, please visit www.loctite.com where you can download catalogues, data sheets, technical papers and application examples. Years of Innovation LOCTITE ® THE SOLUTION PROVIDER... Solution Guide Henkel Adhesives Egypt P.O. Box 71, 6 th of October City 12573 6 th Of October City, 5 th Phase lot 90 A Egypt Phone: 002011341396/5/4 Fax: 002011341327 Henkel Adhesives Middle East C/o Ashwa Adhesives Industries Ltd. Industrial Area Phase II Opp. to Fine Tissue Paper Factory Industrial Area, JEDDAH 21442 Kingdom of Saudi Arabia Phone: 00966 2 6373969 Fax : 00966 2 6379229 [email protected]Henkel Adhesives Middle East Office No. 405 National Bank of Umm Al-Quwain Building Khalid Bin Waleed St (Banks Road) DUBAI / PO Box 29073 United Arab Emirates Phone: 009714 3970499 Fax: 009714 3972194
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Ref. No ME 038 - 01/04 JE
The data contained herein are intended as reference only. Please contact your local Henkel Loctite Technical Support Group for assistance and recommendation on specifications for these products.
10
0
20
30
40
50
60
70
80
90
100
110
120
130
140
150
160
170
180
190
200
210
220
in cm
230
240
250
260
270
280
290
Fifty years of success and commitment to research and development has made Henkel Loctite one of theworld’s leading global brands, with a depth and diversity of product solutions that is second to none.
Our products exemplify our market-led approach of quickly responding to customers’ needs. When youhave a Bonding, Threadlocking, Sealing or Gasketing requirement then look no further than the Henkel Loc-tite range to find the perfect answer. If you want industrial lubricants and Anti-Seize products, surface pre-paration and rust prevention solutions, fibre or metal-based fillers and repair compounds – or just need acleaning product – then Henkel Loctite has the appropriate solution.
Our continuing programme of introducing new and improved technology – such as our range of innovative“stick” products for some of the Threadlocking, Sealant, and Anti-Seize formulations - is the living proofthat we listen and respond to our customers and the market’s needs. They’re just a part of our portfolio ofsuccess – a success based on leadership, technology and innovation.Equally important is our local distributor network, with the knowledge and capability to quickly and effi-ciently deliver the right products for your application. Henkel Loctite sets high standards for its distributorsand works closely with them to ensure they can supply the products you need – on time, every time.
In over 80 countries worldwide Henkel Loctite technology products - designed and manufactured to thehighest standards - ensure that our customers remain ahead of their needs and on top of their game.
For more information on the complete range of Henkel Loctite products, please visit www.loctite.com where you can download catalogues, data sheets, technical papers and application examples.
Years of Innovation
LOCTITE® THE SOLUTION PROVIDER...
Solution Guide
Henkel Adhesives EgyptP.O. Box 71, 6th of October City 125736th Of October City, 5th Phase lot 90 AEgyptPhone: 002011341396/5/4Fax: 002011341327
Henkel Adhesives Middle EastC/o Ashwa Adhesives Industries Ltd.Industrial Area Phase IIOpp. to Fine Tissue Paper FactoryIndustrial Area, JEDDAH 21442Kingdom of Saudi ArabiaPhone: 00966 2 6373969 Fax : 00966 2 [email protected]
Henkel Adhesives Middle EastOffice No. 405National Bank of Umm Al-Quwain BuildingKhalid Bin Waleed St (Banks Road)DUBAI / PO Box 29073United Arab EmiratesPhone: 009714 3970499Fax: 009714 3972194
32
www.loctite.com
With this solution guide you can easily select the best
Henkel Loctite product to solve engineering problems
throughout industry, in original equipment manufacture
as well as maintenance and repair.
It has been developed to make your product selection quick,
easy and right first time. You may navigate this guide to find
solutions from several different starting points:
■ The problem solving section
■ Henkel Loctite product categories
■ A product list including ordering information
For more information about our products or us just "hit”
the Henkel Loctite website – www.loctite.com.
This will give you – anytime day or night – further information
on all of our products including those described here.
Also you have access to our most up-to-date literature and
news about solutions to industrial problems using Henkel
Loctite, addressing segments such as Industrial OEM,
Automotive, Electronics, Maintenance and Repair.
Making the Right Choice
For additional information
visit our Web Site, at:
Problem Solving Guide
ThreadlockingLocking of Threaded Fasteners
Pipe and Thread SealingSealing of Threaded Components
GasketingSealing of Flanges
RetainingSecuring Cylindrical Assemblies
Instant Bonding
Structural Bonding
UV Bonding
Flexible Sealing and Bonding
Lubrication
Surface Treatment and Rust Prevention
Fibre-reinforced Plastic Repair
Metal-filled Compounds
Wearing Compounds
Cleaning
Surface Preparation Activators and Primers
Emergency Repair Products
Equipment
Product OrderingInformation
Measurement Table
4 5
? Join different materials rapidly
? Bond parts temporarily during positioning or repair
? Re-use broken parts
? Need to speed up production
Joining Small Parts
Page 18
? Leaks from hydraulic, air, coolant, oil or other threaded fittings
? Blockages caused by debrisfrom traditional tape andhemp/paste sealants
? Need to lock and seal valves,gauges, taps and fittings inany position without leaks
See also Emergency RepairProducts on page 44
Fluid Pipe Systems
? Nuts, bolts, studs and otherthreaded parts loosening
? Need to prevent threadscorroding and seizing
Nuts, Bolts, Studs, Threaded Parts
? Loose bearings, bushes, shafts or cylindrical parts that have become oval
? Prevent reoccurrence of fretting corrosion and wear, in coaxial assemblies
? Need to increase strength
? Simplify assembly process
Bearings, Bushes,Shafts, CylindricalParts
? Bolted flanges leaking
? Fretting corrosion and /or bolt fatigue
? Bolts loosen as gaskets relax
? Need to stop movement between the flanges
Flanges Leaking
Page 10 Page 12 Page 14 Page 16
? Need to secure small parts in plastic, glass, metal
? Need cure on command
? Need fast curing on a semi or fully automated productionline
? Need to pot/seal
Joining Plastic and Glass to each otherand themselves andto Metals
Page 20
What’s the Problem?
Threadlocking Pipe and Thread Sealing
Gasketing Retaining Instant Bonding UV Bonding
76
Page 36
? Re-build, restore, repair metalparts and assemblies
? Make castings, moulds andfixtures
See also Emergency RepairProducts on page 44
Worn and Damaged Parts
? Prevent corrosion afterassembly or during storage
? Guard against electro-chemical effects
? Protect welds at high temperatures
Corroding Components
? Repair, restore, and join FRPparts or assemblies
? Waterproof filling and sealingof FRP, wood, metal
? Durable structural repairs
Repair/Join Fibre-reinforced Plastic Parts
Page 32 Page 34
? Strong durable joints between different materials
? Replace welding/ riveting -with a corrosion-free, reduced stress joint
Joining Large/ Structural Parts
? Need to combat wear and seizing caused by friction
? Resist high temperatures and tough operating conditions
Lubrication
? Impact and vibration-resistantjoint
? Permanently flexible bondingof different materials
? Joints have large gaps or aresubject to high temperatures
Flexible Joining of Parts
Page 22 Page 24 Page 26
What’s the Problem?
Metal Filled Compounds
Surface Treatmentand Rust Prevention
Fibre-reinforced Plastic Repair
Flexible Sealing and Bonding
Structural Bonding Lubrication
8 9
Page 38
Wear
? Repair or prevent erosion, sliding abrasion, wear andcorrosion in equipment such as pump housings, chutes cyclones etc.
? Protect against cavitation
Page 40
? Cleaning parts prior to usingadhesives/sealants
? Have to remove cured resins, adhesives/sealants, oldgaskets, and other compoundswithout surface damage
? Cleaning electrical contacts
? Cleaning hands, removing ink,paint, resin and hard-to-shiftdirt – with or without water
Cleaning Parts and Hands
? Fill over-sized holes, smooth rough welds, repair nonstructural defects
? Make a new O ring – in situ.
? Emergency plugging and sealing of burst or leakingpipes
EmergencyRepair
Dispensing and CuringAdhesives and Sealants
Page 42 Page 44 Page 46
What’s the Problem?
? Slow adhesive/ sealant cure on oily, contaminated, inert or passivated parts
? Working in a cold environment
? Poor adhesion to the substrate
Slow Adhesive/ Poor Adhesion
? Apply thick or thin productseasily, cleanly, accurately and without waste
? Cure UV Bonding productsquickly and completely
? Need NSF approval check section:
• Threadlocking• Pipe and Thread Sealing• Gasketing• Retaining and Securing
NSF is one of the mostwidely respected and recognised global third-party certification providersfocusing on food, water,indoor air and the environment. For more information go to www.nsf.com
Wearing Compounds
Surface PreparationActivators and Primers
EquipmentEmergency Repair Products
Cleaning
Size of Thread Up to M 6 Up to M 36 Up to M 36 Up to M 50 Up to M 20 Up to M 50
Long-Term Temperature Resistance +150 °C +150 °C +150 °C +150 °C +150 °C +150 °C
Pack Sizes 10 ml, 50 ml, 250 ml 10 ml, 50 ml, 250 ml 10 ml, 50 ml, 250 ml 9 g, 19 g stick 10 ml, 50 ml, 250 ml 9 g, 19 g stick
Loctite® 222 Recommended for low-strength threadlocking ofadjusting screws, counter-sunk head screws and setscrews.
Also use on low strengthmetals such as aluminium orbrass which could breakduring disassembly.
P1 NSF Reg. No.: 123002
Loctite® 243 Effective on all types ofmetal threaded fasteners.
Prevents loosening on vibrat-ing parts such as pumps,motor mounting bolts, gearboxes or presses.
Recommended for usewhere disassembly with hand toolsis required for servicing andwhere parts are contamina-ted with oil.
P1 NSF Reg. No.: 123000Certified to ANSI/NSF Standard 61
Application Examples
1 Typical value @ 22 °C
10 11
222 243
Liquid
Low High
■ Resists vibration■ Single part – clean and easy to apply■ Can be used on all sizes of fasteners – reduces inventory costs■ Seals threads – allows through-hole tapping
Handy Hints:
■ Clean parts with Loctite® 7063 before applying the adhesive ■ If the threadlocker will be applied below 5 °C, pre-treat with
Loctite® 7240 (Activator)■ If the parts were in contact with aqueous washing solutions or
cutting fluids which leave a protective layer on the surface, washwith hot water before use
■ If one substrate is plastic look at page 18/19 Instant Bonding
Loctite® 248Convenient to use, nomigration. Suitable whereproduct application accessis difficult – overhead, under,or around machinery – oncomponents that cannot bemoved.
Effective on all types ofmetal threaded fasteners.Recommended for applicati-ons where disassembly isrequired – Machine tools andpresses, pumps and com-pressors, mounting bolts,gear boxes.
Loctite® 2701 (improved Loctite® 270)For use on all metal fasteners (including stain-less steels and those withprotective coatings such aszinc) where regular removalfor maintenance is notrequired.
Recommended forpermanently locking studson engine blocks and pump housings.
P1 NSF Reg. No.: 123006 – only Loctite® 270
Loctite® 268Convenient to use, nomigration.Suitable where productapplication access is diffi-cult – overhead, under, oraround machinery –on components that cannotbe moved.
Effective on all types ofmetal threaded fasteners.Recommended for usewhere regular removal for maintenance is notrequired –suspension bolts, motor transmission and pumpmounts, bearing cap boltsand studs.
Loctite® 290Recommended for locking preassembled fasteners, e.g. instrumentation screws, electrical connectors and set screws.
290
Wicking grade
Yes No
Threadlocking – Locking of Threaded Fasteners
Solution
What strength do you require?
Liquid Semi-Solid
268
Semi-Solid
Medium
Are the parts already assembled?
248 2701(improved 270)
TH
EN
EW
AN
AE
RO
BIC
ADHESIVE NOZZLE & CAP
Curing semi-solid
3”
+150 °C
Low
Metal
Yes
19 g stick
12 13
Are the parts metal or plastic?
55
Handy Hints:■ If the sealant (Loctite® 542, 577 or 572) will be applied below
5 °C, pre-treat with Loctite® 7240 (Activator)■ All parts must be clean & dry before sealing –
use Loctite® 7063■ If the parts have been in contact with washes or cutting fluids
containing nitrites wash them with hot water 1
■ Clean U-PVC pipe surfaces with Loctite® 7044 prior to joining with Loctite® 5004
Do you need to make post assembly adjustments?
Yes
CordJoining non threadedplastic pipe fittings
5004
Plastic or combined plastic/metal parts
Loctite® 577Recommended for all coar-se metal threads. Suitablefor fast applications at lowtemperatures e.g. outdoorplant maintenance.
Carries the GermanDVGW approval (NG-5146AR 0621). Tested in accordance toEN 751-1.
Meets BS 6956 type B forsealing gas fittings.
WRC approval for usewith potable water.
P1 NSF Reg. No.: 123001WRC Approval 0302507
Loctite® 572Recommended for all coar-se metal threads whereslow cure is required forajusting the aligment of val-ves and fittings.
Meets BS 6956 type B forsealing gas fittings.
Loctite® 542Recommended for finethreaded fittings as usedin hydraulic and pneuma-tic installations and smallfittings in general.
Carries the GermanDVGW approval (NG-5146AR 0855). Tested in accordance toEN 751-1.
Meets BS 6956 type A forsealing gas fittings.
WRC approval for usewith potable water.
Pipe and Thread Sealing –Sealing of Threaded Components
Loctite® 5331Recommended for use onthreaded plastic or pla-stic/ metal fittings carryinghot or cold water e.g.industrial and agriculturalplastic water pipesy-stems, or drainagesystems.
Carries the GermanDVGW (NG-5146 AR0618) and KTW approvalsfor gas and potable water.Tested in accordance toEN 751-1.
WRC approved for usewith potable water up to85 °C.
P1 NSF Reg. No.: 123620
1 Does not apply to Loctite® 5331/55
Loctite® 55Can be safely applied onmetal and plastics threadedfittings.
Potable water: WRC listedfor use with potable water upto 85 °C, meets BS 6920.KTW recommendation forcold and hot water.
Gas and water: Carries the German DVGW approval (No. DV-5142AU0166),together with DIN 30660.Tested in accordance withEN 751-2 Class ARp.
Certified to ANSI/NSF Standard 61.
Application Examples
Solution
Loctite® 5004Special solvent-based adhe-sive for bonding U-PVCpipes.
Complies with the following:DIN 16970 and KRV guide-lines R1.17; BS 4346, part 3and ASTM D2564.
The cured adhesive meetsthe requirements of admissi-on for drinking water supplythrough U-PVC pipes incompliance with the Recom-mendation no. VIII of the Plastics Commission ofthe Bundesgesundheitsamt(Germany Health Authorities).
■ Provide an instant, low pressure seal for all types of pipe connections■ Will not creep, shrink or block systems (including filters) by shredding■ Disassembly can be achieved easily with normal tools■ Replace all tapes and hemp/pastes combinations
Loctite® 561Convenient to use, no migration. Suitable whereproduct application accessis difficult – overhead,under, or around machinery– on components that can-not be moved.
Recommended for all coar-se metal threads, wheredisassembly is required.
Ideal for use in a broadrange of industries inclu-ding chemical processing,waste water treatment, and automotive.
561572(Slow cure)
577General purpose
Metal parts
Are the threads fine or coarse?
Coarse up to (R3) pipe threadLiquid
No
572Slow cure
Fine up to (R3/4) pipe thread
542Hydraulic and
pneumatic5331
Semi-Solid
561
Description Solvent Cord Curing gel Curing liquid Curing gel Curing gel
Maximum Thread Size N.A. Tested to 4” 3” 3/4” 3” 3”
Temperature Resistance As plastic +130 °C +150 °C +150 °C +150 °C +150 °C
Disassembly Strength High Low Low Medium Medium Medium
Substrate to be Sealed U-PVC Metal, plastic or both Metal, plastic or both Metal Metal Metal
Instant Low Pressure Seal No Yes (full pressure) Yes No Yes No
Pack Sizes: 125 g, 250 g, 500 g 80 g = 150 m cord 100 ml 10 ml, 50 ml, 250 ml 50 ml, 250 ml 50 ml, 250 ml
1514
Does the existing gasket need to be used as a shim?
574
Handy Hints:■ If there are traces of old gasket left on the
parts to be sealed, clean with Loctite® 7200 gasket remover
■ All parts must be clean and dry before sealing– use Loctite® 7063
■ Anaerobic products cure between metal surfaces in the absence of air
■ Use activator Loctite® 7240 in cold conditions to speed up the cure
Yes
5203 3020
Coat existing gasket
Positioning cut gaskets
518 510
Up to 0.5 mm
5910 5699
Gasket Type Formed-in-place Use with cut-gasket Formed-in-place Formed-in-place Formed-in-place Formed-in-place Formed-in-place Formed-in-place
Flange Type Rigid Rigid or Flexible Rigid Rigid Rigid Rigid Flexible Flexible
Tack-Free Time N.A. N.A. N.A. N.A. N.A. N.A. 20 min. 10 min.
Temperature Resistance 150 °C N.A. 150 °C 150 °C 150 °C up to 200 °C 200 °C 200 °C
Instant Seal Excellent Excellent Excellent Excellent Excellent Excellent Excellent Excellent
Oil Resistance Excellent N.A. Excellent Excellent Excellent Excellent Excellent Good
Water/Glycol Resistance Moderate N.A. Excellent Moderate Excellent Good Moderate Excellent
Pack Sizes 50 ml, 300 ml cartridge 400 ml aerosol 50 ml, 250 ml tube 65 ml, 300 ml cartridge 50ml,160ml,250ml cartridge 50 ml, 300 ml cartridge 300 ml cartridge 300 ml cartridge
5205
Greater than 0.5 mm
Plastic or combined plastic/metal parts
What gap must the sealant fill?
No
Gasketing – Sealing of Flanges
Loctite® 5203 Recommended for coating and re-usinggaskets to improve sealing. Low strength metal/metal sealing.
Loctite® 574Recommended for useon rigid metal partse.g. cast iron compo-nents and pump hou-sings, etc.
Loctite® 5205 Recommended foraluminium parts whereflexibility is required e.g. aluminium gearboxand engine castings,etc.
■ No shimming effect – controlled tolerances, no need for re-torquing■ Fill all voids – reduce the need for a fine surface finish of flanges■ Parts can be disassembled easily even after extended service■ Resists high pressure when fully cured
Loctite® 5910Replacement for cork and paper cut gaskets on flanges and stamped sheet metalcovers.
Recommended for usewhere high vibration orflexing occurs. Canalso be used with plastic and paintedparts.
Loctite® 3020Adhesive/sealant forholding pre-cut gasketsin place during assemb-ly. Can be applied to allrubber, cork, paper andmetal gaskets.
Loctite® 518 Recommended for use on rigid iron, steel andaluminium flanges.
P1 NSF Reg. No.: 123758
Loctite® 5699 Recommended forsealing all types offlanges including stamped sheet metalwhere water glycolresistance is required.P1 NSF Reg. No.: 122998
Application Examples
Loctite® 510Sealing rigid flangesRecommended for applications wherehigh temperature andchemical resistance isneeded.
P1 NSF Reg. No.: 123007
Solution
Metals Aluminium
1716
Strength Required High Moderate High High High
Handling Strength1 20 min. 30 min. 5 min. 8 min. 10 min.
Diametrical Clearance Up to 0.5 mm Up to 0.1 mm Up to 0.15 mm Up to 0.25 mm Up to 0.1 mm
Temperature Resistance 150 °C 150 °C 175 °C 150 °C 150 °C
Pack Sizes 50 ml 10 ml, 50 ml, 250 ml 50 ml, 250 ml 50 ml, 250 ml 10 ml, 50 ml, 250 ml
Yes (gaps to 0.5 mm)
660with Activator 7240
648 638 603(improved 601)
Handy Hints:■ If the retainer will be applied below 5 °C, pre-treat with
Loctite® 7240 (Activator)■ All parts must be clean & dry before sealing –
use Loctite® 7063■ If the parts have been in contact with washing or cutting fluids
containing nitrites, wash with hot water■ Can also be used to increase the strength of existing designs
641
Yes
No (gaps to 0.25 mm)
Will the parts be dismantled later for maintenance? i.e. bearings
Up to 0.1mmUp to 0.25 mm
No
Yes (to 175 °C)
Is the assembly very loose or badly worn?
Temperatures above 150 °C?
No
How big is the gap?
Retaining –Securing Cylindrical Assemblies■ High and moderate strength products – can carry high loads
and eliminate fretting■ Fill all voids – prevent corrosion■ Reduce the need for close tolerances■ 100 % contact – load and stress is distributed evenly over the joint
Loctite® 660 (use with Activator Loctite® 7240) Used for repairing worn coaxialparts without remachining; enables re-use of worn bearingseats, keys, splines, tapers, or for retaining shims. P1 NSF Reg. No.: 123704
Loctite® 648Recommended for high temperature retaining of partswith a clearance or interference fit i.e. retaining bushes, bearings, seals,fans, and liners.
Loctite® 641Recommended for parts that will need subsequentdismantling i.e. retention ofbearings onto shafts and into housings.
1 at room temperature on steel joints
Loctite® 603(improved Loctite® 601)For retaining close fittingcylindrical parts (up to 0.1 mmgap). For use on cylindricalfitting parts where thoroughdegreasing is not possible.
Tested and approved for useon bearings.
P1 NSF Reg. No.: 123003
Loctite® 638Gives best resistance todynamic, axial and radialloads.
Recommended for retaining shafts, gears, pulleys and similar cylindrical parts.
P1 NSF Reg. No.: 123010WRC Approval 9909511
Application Examples
Solution
TH
EN
EW
AN
AE
RO
BIC
ADHESIVE NOZZLE & CAP
18 19
Operating Temperature Up to 80 °C Up to 80 °C Up to 100 °C 70 °C Up to 80 °C Up to 80 °C Up to 80 °C
Fixture Time1 10-20 sec. 5-20 sec. 60-120 sec. 5-20 sec. 3-20 sec. 5-20 sec. 5-20 sec.
Viscosity mPa.s 20 Gel 300 400 2 110 1000
Especially for Plastics Porous Substrates Metal/Plastics Flexible Substrates Metal/Plastics Porous Substrates Porous Substrates
Pack Sizes 20 g, 500 g 10 g, 20 g, 300 g, 300 g cartridge 20 g, 500 g 20 g, 500 g 20 g, 500 g 3 g, 20 g, 50 g, 500 g 20 g, 500 g
Yes
406with Primer 7239
431
No
Do any of the following apply?
Is the gap over 0.1 mm? Do you require a non-drip/non-run product?
454
If one or more apply
480
Yes
401
No
Are you bonding “difficult to bond” rubber or plastic? e.g. polyethylene, polypropylene, PTFE, thermoplastic rubbers such as Santoprene®
Handy Hints:■ To improve adhesion to
difficult-to-bond materi-als e.g. PE, PP, PTFE, Santoprene® or thermoplastic rubbers; in combination with Loctite® 401, 406, 431, 454, 480 or 4850 – use Primer Loctite®
7239
Bonding flexiblematerials
4850
Is the bond going to be subject to shock or peel loads?
4062
No
Instant Bonding
Loctite® 454General purpose gel for bondingmetals, composite materials,wood, cork, foam, leather, card,paper, and unglazed ceramics. Recommended for use on verti-cal or overhead surfaces.P1 NSF Reg. No.: 123009
Loctite® 406Rapid bonding of rubbers (in-cluding EPDM), plastics andelastomers, when used with Loc-tite® 7239 Polyolefin Primerbonds “difficult to bond” plastics.
1 on steel
Loctite® 4062Ideal for very fast bonding of plastic, rubber and metal substrates.
Loctite® 480Black, rubber toughened gradefor bonding metal to metal andmetal to rubber; especially suit-able with applications where highpeel strength is required and/orshock loads are present.
Loctite® 431Particularly suitable for bon-ding porous or absorbentmaterials such as: wood,paper, leather, cork andfabric.
Loctite® 401General purpose for bondingmost substrates such as plastics, rubber, metals, card, wood.
P1 NSF Reg. No.: 123011
■ Fixtures in seconds■ Clear bond line – good cosmetic appearance■ Versatile – dissimilar materials can be bonded■ High strength – often giving a bond stronger than the materials being bonded■ Small parts bonding
Application Examples
Solution
Loctite® 4850Flexible instant AdhesiveMedium viscosity, fastcuring,transparent adhesive.Especially designed for the assembly and repair of flexiblematerials and components.Typical application areas: Bonding materials used in themanufacture and repair of fle-xible gaskets and seals, gaiters,and loudspeaker assemblies.
2120
Operating Temperature +100 °C +100 °C +120 °C Up to 120 °C
Fixturing time 1 1-10 sec. 1-10 sec. 5-20 sec. 5-20 sec.
Viscosity mPa.s 100 5.800 5.500 19.500
Pack sizes 250 ml 250 ml 250 ml 250 ml
350
What is your transparent substrate?
352
Handy Hints:■ One of the parts being bonded must be UV-transparent■ Henkel Loctite provides a full range of UV curing equipment
302
Yes Horizontal Vertical
Horizontal or vertical application
Glass
322
No
Wicking grade
Plastic
ww
w.z
anot
ti.it
Loctite® 352Thixotropic clear UV curing adhesive.
Especially designed for vertical application.
Recommended for glass in combination with glass,metal, ceramic and GlassReinforced Plastic (GRP).
UV Bonding
■ Fast and Cure on Demand■ Rapid fixture after alignment or repositioning of parts■ Clear bond line■ High strength and excellent humidity resistance
Loctite® 350Medium viscosity UV curing adhesive.
Highly transparent.
Recommended for glass in combination with glass andmetal.
Loctite® 302Low viscosity fast curingclear UV curing adhesive.
Especially designed for post-application.
Recommended for plasticsto themselves, metal andglass.
1 Fixturing time is dependent on type of lamp and intensity as well as application details
Loctite® 322Medium viscosity fast curingclear UV curing adhesive.
Recommended for plasticsto themselves, metal andglass.
Application Examples
Solution
Loctite® Hysol® 9492 A&Bis a high operating tempera-ture resistant, 2K-Epoxy adhe-sive, suitable for multi purpo-se applications. Ideal for bonding electronic com-ponents and mesh to frames.
2322
Structural Bonding
■ Bonds a wide variety of materials such as wood, metals, hard plastics and glass
■ Provide a tough and resilient joint ■ Have high shear and peel strength
Loctite® Hysol® 3450 A&Bis a five-minute, 2K-Epoxyadhesive, suitable for wherelarge gaps are present. Idealfor bonding and filling damaged components.
Loctite® Hysol® 3421 A&B is a general purpose, 2K-Epoxy adhesive, for bondinglarge surfaces which requirea long open time. Ideal forbonding metals, plastics andmost other surfaces whichwill be subjected to highhumidity environments.
Description 2K-Epoxy 2-part-acrylic (no mix) 2K-Epoxy 2K-Epoxy 2K-Epoxy 2K-Epoxy
Mix ratio by volume 1:1 – 1:1 1:1 2:1 2:1
Mix ratio by weight 100:90 – 100:100 100:105 100:50 100:50
Working life 180 min. – 4 min. 4 min. 60 min. 15 min.
Fixture Time 240 min. 5 min. 12 min. 12 min. 180 min. 75 min.
Colour Clear amber Light amber Ultra clear Grey Off-white White
Operating temperature up to 100 °C up to 100 °C up to 80 °C up to 100 °C up to 120 °C up to 180 °C
Pack sizes 50 ml, 200 ml, 400 ml 18 ml, 50 ml Kit, 24 ml Twin Syringe; 25 ml Twin Syringe 50 ml, 200 ml, 400 ml 50 ml, 400 ml
Dual Cartridges; 315 ml Cartridge 50 ml, 200 ml Dual Dual Cartridges; 1 kg Cans; Dual Cartridges
1 kg Cans, 20 kg Pails Cartridges; 1 kg Cans 20 kg (A), 17 kg (B) Pails
3450 A&B
Loctite® Hysol® 9466 A&Bis a toughened, 2K-Epoxyadhesive, suitable for multi-purpose applications requi-ring long open time and highbonding strength. Ideal for awide variety of substrates likemetals, ceramic and mostplastics.
9466 A&B
Loctite® Hysol® 3430 A&Bis a five-minute, 2K-Epoxyadhesive, suitable for appli-cations requiring an opticallyclear bond line. Ideal for bonding glass, decorativepanels and displays andgeneral repair applications.
3430 A&B
What main performance are you looking for?
9492 A&B
Loctite® 330/7388 MULTI-BOND® 50 ml Kit is a two part no mix, fastcuring, toughened adhesivewith good impact resistance.Ideal for bonding dissimilarsubstrates, including plasticslike PC, PVC, phenolic andacrylic.
P1 NSF Reg. No.: 123005
General purpose High TempertureHandy Hints:■ All parts must be clean & dry before bonding –
use Loctite® 7063■ For slow curing products, clamp during cure
Application Examples
Solution 330/7388MULTI-BOND®
Five-minute Thoughened
3421 A&B
2524
Operating Temperature Up to 200 °C Up to 250 °C 350 °C Up to 350 °C Up to 80 °C Up to 100 °C
Skin Over Time 70 min. 5 min. 8 - 10 min. 5 min. 70 min. 15 min.
Viscosity Paste Paste Liquid Paste Paste Paste
Especially for Electrical components Glass Sealing/ Oven door seals Flexible, Flexible bonds, joint sealingPotting heat source sealing medium strength bonds
Colour Variations Translucent 5366 - Clear Red Red 5226 - Black Low Strength: 5062-Black, 5063- Grey, 5064-White5367 - White 5221 - Grey Medium: 5065- Black, 5066- Dark-Grey, 5068-White5368 - Black 5225 - White High Strength: 5069-Black
Pack Sizes 40 ml kit, 300 ml 310 ml 310 ml 310 ml 300 ml 310 ml
Yes
5145 5226 5069
Are you sealing electrical items?
No
Do you require high temperature resistance?
Yes
If a higher strength sealer and/or paintability is required
No
53995366
Up to 250 °C Up to 350 °C Up to 350 °C
Handy Hints:To improve adhesion of Loctite® 5221/5225/5226 use the following primers:
Loctite® 7251 – GlassLoctite® 7252 – Plastic and paintLoctite® 7253 – Metal
5398
Flexible Sealing and Bonding■ Withstand impact shock and bending■ Resist thermal expansion and contraction as well as vibration■ Have very good gap fill■ Wide temperature range■ Good weathering resistance
Loctite® 5399 Flexible high temperatureAdhesive/SealantSuitable for bonding andsealing glass, metal, andceramics, where temperaturecan reach 350 °C, e.g. sealingof stove flues/chimneys,industrial ovens, electro-appliances and ventilationsystems.
Loctite® 5366/5367/5368 Flexible AdhesiveCures to a flexible rubber.
Recommended for bonding, sealing and protecting components subjected tovibration. Suitable for glass, metal,ceramics, composites, andmost plastics.
Loctite® 5221/5225/5226Flexible Adhesive/SealantPaintable, with good chemi-cal resistance.
Recommended for bondingmaterials with different coeffi-cients of thermal expansion.
See handy hints.
Loctite® 5062/5063/50645065/5066/5068/5069MS PolymerAdhesive/SealantPermanently join and seal bare and painted metals, plastics, wood and many othermaterials, without the need forprimers.
Good UV resistance.
Application Examples
Loctite® 5398Flexible Adhesive/SealantFood gradeRecommended for sealing heatexchangers steam circuits,water heaters, ovens and inequipment such as turbines,pumps.The product may also be usedfor protection and insulation ofelectrical boxes.
Solution
Appearance Black Off white paste Colourless Yellow Colourless Colourless liquid Colourless liquid Light yellow liquid
Base MoS2 PTFE Mineral oil Synthetic oil Mineral oil Silicone oil Mineral oil Mineral oil
Loctite® 8150 canLoctite® 8151 aerosolLoctite® 8060 stickAluminium based Anti-Seize for screws, nuts,pipes, heat exchangersetc. Typical applications:wheel to hub connection.
Loctite® 8153 aerosolLoctite® 8156 canMetal free Anti-Seize.Recommended where cleanliness is impor-tant. Can be used onstainless steel, copperalloys, in wet environ-ments and all otherstandard applications.
Loctite® 8154 aerosolLoctite® 8155 canMoS2 assembly pastewhich is ideal for slowmoving or staticassemblies. Preventspress fits from gallingor seizing and canreduce the risk of wearduring start up.
Loctite® 8014 canFood grade metal free Anti-Seize. Recommen-ded for stainless steel components, and canbe used in wet environ-ments.
Do you need?
Yes
MoS2 Assembly Paste/Spray
Metal Free Anti-Seize
Need metal free formulation? Is the application for incidental food contact?
No Yes No Yes
8153/81568023 8013 8009 8012
Marine Grade Anti-Seize
N-7000 HighPurity Anti-Seize
Heavy Duty Anti-Seize
Moly Paste
High performance applications
To use in high humi-dity / water concen-
trations
High Purity Ideal for Nuclear
Applications
To use for long term protection at high temperatures
To eliminate friction seizure during
assembly (high %MoS2)
Colour Black Dark grey Black Black Copper Grey White Black White
Temperature Range -30 to +1315 °C -30 to +1315 °C -30 to +1315 °C -30 to +400 °C -30 to +980 °C -30 to +900 °C -25 to +900 °C -20 to +450 °C -30 to +400 °C
Pack Sizes 454 g brush top 454 g brush top 454 g brush top, 454 g brush top, 400 ml aerosol, 400 ml aerosol, 400 ml aerosol, 400 ml aerosol, 907 g can3.6 kg can 6.8 kg can 113 g, 454 g brush top, 500 g can, 500 g can 1 kg can
3.6 kg can, 1 kg can, 5 kg can, 20 g stick 20 g stick
Approvals American Bureau PMUC – – MIL-PRF-907E SECLF 216 SECLF 216 8154: H2 NSF Reg. No.: FDA 21 CFR 178-3570of Shipping certified D5OYP12 General Electric 122982 H1 NSF Reg. No.:
MIL-PRF-907E TIL 1117-3R1 123004
Loctite® 8023 brush topAnti-Seize with ultima-te wash out resistance.
Loctite® 8013 brush topHigh Purity metal free Anti-Seize with excel-lent chemical resi-stance. Recommendedfor stainless steel.Ideal for use in thenuclear industry.
Loctite® 8009 brush topMetal free Anti-Seize providing a long term lubrication on all metalsincluding stainless steel and titanium.
Loctite® 8012 brush topMoS2 assembly paste ensures maximumlubricity, gives goodresistance to extreme-ly high loads and isideal for protection ofparts during running inor cold start.
Especially suitable for pro-tecting welds from corrosionon galvanised parts.
Loctite® 7802Varnish sprayEasy to remove coating that provides long term protection.
Protects equipment such as cutting and stamping tools in perfect condition duringindoor and outdoor storage.
Loctite® 7803 Metal protection coating sprayNon drying, tack free coating which provides long term corrosion protection.
Is compatible with most plastics and elastomericmaterials.
Long term protection ofmetal assemblies such asmoulds, machines andoutdoor installations.
Solution
Handy Hints:Use Loctite® 3029 HardenerLoctite® 3029 Hardener initiates and speeds the cure of Loctite® Polyester resin based productsAdd the hardener to the resin in the recommended proportions and mix thoroughly
3534
Repair, rebuild or join Fibre Reinforced Plastic parts
Colour Blue/Green White White White/Grey Semitransparent Gold
GRP*, Steel, Aluminium Yes Yes Yes Yes Yes
Enamel No Yes No No No
Wood Yes No Yes Yes Yes
Stainless Steel No No No Yes No
Mix Ratio by wt. 97 to 3 96 to 4 97 to 3 1 to 1 96 to 4
Working time 8 min. 8 min. 6 min. 15 min. 5 min.
Setting time at 20 °C 10 min. 10 min. 10 min. 60 min. 10 min.
Sandable after at 20 °C 20 min. 60 min. 20 min. Cure time 240 min. 20 min.
Pack Sizes 165 g, 750 g 165 g 150 g, 665 g 150 g Kit
Fibre-reinforced Plastic Repair
Loctite® 3024Gelcoat FillerTwo part Polyester resin.Can be over-painted to match topside colour scheme.Can be combined with Loctite®
3025 for larger repairs.Fully cured in 60 min. to awaterproof, hard, white finish.Specially formulated for minordamage (osmosis blisters, scratches and small holes) in glass fibre and enamelled surface finishes.
■ Repair fibre- or glass-reinforced plastics, wood or metal parts■ Fill and seal cracks, holes and other gaps■ Products are waterproof and paintable■ Repairs can be sanded, shaped and machined■ Join and repair structural panels and stiffeners
Loctite® 3028Glass Fibre Resin KitTwo part Polyester resin with reinforcingglass fibre mat.The kit contains resin, hardener, glassfibre mat, mixing cup, spatula and brush.Sets in 10 min.; fully cured after 30 min.Recommended for joining different materials such as wooden bulkheads toGRP* hulls or metals and plastics. Enables the formation of a tough, gap-filling fillet where stiffeners and panels arejoined.
Loctite® 3022Glass Fibre PasteTwo part, glass fibre reinforcedPolyester paste.High strength bond for structural repair.Extremely water-resistant.Sets in 10 min.; can be sandedafter another 10 min. Recommended for repairingholes and gaps up to 50 mm inGRP*, aluminium, steel andwood.
Loctite® 3026Marine Epoxy Two part epoxy.Makes a strong and durable repair.Waterproof, fuel-resistant, paint compatible.Sets in 60 min.; fully curedin 4 hrs. Do not apply a polyester direct-ly to Loctite® 3026 Marine Epoxy. Sealthe epoxy surface first, using a primerpaint. Ideal for between-tides repairs toferrocement and fibre-reinforced hulls,will also repair wood, steel, stainlesssteel, cast iron and aluminium components.
Application Examples
*GRP – Glass Fibre Reinforced Plastic
Loctite® 3025Marine Filler Two part Polyester paste.Waterresistant must be over-painted if used below the waterline.Paint-compatible.Sets in 10 min.; can be machi-ned, drilled, tapped and sandedin further 10 min.Recommended for filling andsealing large holes and cracks inhull materials such as glassfibre, steel, aluminium andwood.
Operating temperature Up to 120 °C Up to 120 °C Up to 120 °C Up to 120 °C Up to 190 °C Up to 120 °C
Pack sizes 500 g Tub Kit 500 g Tub Kit 500 g Tub Kit 500 g Tub Kit 500 g Tub Kit 500 g Tub Kit
3736
Metal-filled Compounds
Loctite® Hysol® 3473 A&Bis a rapid curing, steel filled 2K-Epoxy adhesive, foremergency repairing andrebuilding worn metal parts.Ideal for repairing pipes andcastings as well as cracks in housings and machine parts.Making of moulds, models,tools and fixtures.
Loctite® Hysol® 3472 A&Bis a pourable steel filled, 2K-Epoxy adhesive, for repairingand rebuilding worn metalparts. Ideal for repairing pipes andcastings as well as cracks in housings and machine parts.Making of moulds, models, tools and fixtures.
Loctite® Hysol® 3471 A&Bis a steel filled, 2K-Epoxyadhesive, for repairing andrebuilding worn metal parts.Ideal for repairing pipes andcastings as well as cracks inhousings and machine parts.
Repair or rebuild damaged parts?
3472 A&B3471 A&B 3473 A&B 3479 A&B 3474 A&B
Loctite® Hysol® 3474 A&Bis a mineral filled, 2K-Epoxyadhesive, which forms a self-lubricating surface to reducesliding wear on moving parts.Ideal for metallic surfacesunder friction.
Wear resistantHigh temperatureresistant
3475 A&B
Loctite® Hysol® 3479 A&Bis an aluminium filled, 2K-Epoxy adhesive, for repairing and rebuildingworn metal parts in high operating temperature applications. Ideal for repairing castingsand cracks in housings andmachine parts.
Loctite® Hysol® 3475 A&Bis an aluminium filled, 2K-Epoxy adhesive, for repairingand rebuilding worn metalparts. Ideal for repairingcastings and cracks in housings and machineparts.
■ High compressive strength■ Choice of mild steel or aluminium fillers■ Can be machined, drilled or tapped after cure■ Excellent resistance to aggressive chemicals
Multi purpose
Aluminium Metallic parts under friction
PourablePutty Fast cure
What material are you filling?
Solution
Steel
(Metal Set S1) (Metal Set S2) (Metal Set S3) (Metal Set A1) (Metal Set HTA) (Metal Set M)
Application Examples
3938
Description High temperature High impact High temperature High temperaturewearing compound wearing compound pneu wear brushable ceramic
Colour Grey Grey Grey Grey
Maximum Temperature 230 °C 120 °C 230 °C 205 °C
Mix Ratio by Volume 4 to 1 2 to 1 4 to 1 2.75 to 1
Working Time 30 min. 30 min. 30 min. 30 min.
Cure Time 7 to 9 hrs* 6 hrs 6 to 8 hrs* 8 to 14 hrs*
Pack Sizes 10 kg Kit 1 kg Kit 10 kg Kit 1 kg Kit
7230 7229
High temperatureup to 205 °C
High temperatureup to 230 °C
Thin filmThick layer
7234
High temperatureup to 230 °C High impact
Pneumatic abrasion
FineCoarse
Repair or rebuild worn surfaces
7219
Fine or coarse particle abrasion?
Wearing Compounds
■ Restores worn surfaces■ Wear resistant coating■ Use on new parts to extend life■ Available in both trowelable and brushable forms
Loctite® 7230 High temperature wearing compoundTrowelable compound thatprotects against sliding abrasion.
Use to rebuild and protectchutes, pump housings,elbows, cyclones and material handling equipment.
Loctite® 7229High temperature pneu wearResists fine particle abrasion caused in pipe elbows of pneumatic conveyorsystems.
Loctite® 7219 High impact wearing compoundToughend adhesive absorbs impacts.
Recommended where both sliding abrasion and impacts are present.
Solution
Loctite® 7234 High temperature brushable ceramicSmooth, wear, resistant, low friction coating to combat turbulence and cavitation on components such as pump housings and impellors.
* Require heat cure for maximum temperature resistance
Application Examples
4140
70637200*Gasket Remover
Do you need a hand cleaner or a parts/surface cleaner?
Yes
7850
Hand cleaner
General purpose
7855
For ink paint or resin on hands
Large surfaces i.e. worktops
7840*
Yes
No
Description Hand cleaner Hand cleaner Contact cleaner spray Gasket remover Cleaner and degreaser Cleaner Cleaner and degreaser
Pack Sizes 400 ml bottle, 400 ml bottle, 400 ml aerosol 400 ml aerosol 400 ml aerosol, 1 litre can 750 ml trigger spray,1.75 litre pump 3 litre pump 10 litre can, 5 litre can,
Parts/surface cleanerParts i.e. machined components
General parts pipe cleaner
No
Are you removing old gaskets?
7044
U-PVCpipe cleaner
Cleaning■ Clean components prior to using Henkel Loctite Adhesives/Sealants■ Clean and degrease worktops and parts ■ Remove cured Sealant residue■ The hand cleaner sub-section includes two very effective, gentle
and biodegradable hand cleaners
Loctite® 7039 Contact cleaner sprayDoes not affect insulating varnishes. For cleaning electrical contacts, relays,switchgear etc. withoutaffecting insulating varnishes. Displaces moisture andforms a water repellant film.
Loctite® 7063Cleaner & degreaserGeneral parts cleaner which leaves no residue - ideal for use prior to adhesive bonding and sealing applications.Compatible with metal,glass, rubber, most plasticsand painted surfaces.
Loctite® 7200Gasket removerRemoves cured gasketsealants and traditionalgaskets from most types ofsurfaces in 10 to 15 minutes without scraping.
Loctite® 7840Cleaner & degreaserBiodegradable, solvent free, non-toxic and non flamma-ble, diluted with water.
Rated USFA-C1.
Removes grease, oil, cutting fluids and workshop grime.
* For best product peformance clean parts with Loctite® 7063 prior to adhesive application
Loctite® 7850 Hand cleanerHand cleaner made fromnatural extracts and free frommineral oils. Biodegradable.Contains premium skin conditioners. Works with orwithout water. Removes ground-in dirt, grease, grime,and oil.
Loctite® 7855 Hand cleanerRemoves paint, resin andadhesives. Biodegradableand non toxic.
Application Examples
Solution
Loctite® 7044 U-PVC pipe cleanerProduct 7044 is a non-aqueous, non-CFC solventdesigned for cleaning anddegreasing of PVC pipe surfaces before bonding with Loctite® 5004.
4342
Do you need an activator or primer?
7251 7252 7458 7240
In combination with222, 243, 2701, 290,
510, 518, 5203, 5205, 5208, 542, 572, 577,
603, 638, 641, 648 or 660
7253
In combination with 5221, 5225, 5226
Improve adhesion to specific surfacesAccelerate cure?Large gap fill or
Temperature <5°C?
7239
Description Primer Primer Primer Primer Activator ActivatorColour Black Black Colourless Colourless Colourless Blue-greenPack Sizes 25 ml, 200 ml 25 ml, 200 ml 25 ml, 200 ml 4 ml 500 ml 90 ml pump
Increase cure speed of
Instant Adhesivessuch as, 401, 406, 431, 454
and 4850In combination with
401, 406, 431, 454, 480 or 4850
Improve adhesion to difficult-to-bond materials e.g.
PE, PP, PTFE, Santoprene®
or thermoplastic rubbers
Surface Preparation – Activators and Primers
Primer Loctite® 7253Bonding/sealing bare metallic surfaces.
Loctite® 7239Is a general purpose Primer, suitable for use on all industrial plastics, which willimprove the adhesion ofInstant adhesives.
Loctite® 7240Is a solvent-free activatorthat increases cure speed onpassive surfaces such as,stainless steel, aluminiumand plated or passivatedmetals.
Primer Loctite® 7252Bonding/sealing glass &glazed materials.
Primer Loctite® 7251Bonding/sealing plastics, painted materials and wood.
■ Accelerate cure of Henkel Loctite products even at low temperatures■ Improve adhesion to non-wetting surfaces
Solution
Application Examples
Loctite® 7458Cures excess adhesive.
Minimizes post cure bloo-ming and optimizes bondstrength.
Low-odour.
Recommended for any areaswhere the speed of cure andaesthetics requirements arecritical to ensure a neat andconsistent bond-line.
4544
3463 50707100
Emergency Repair
O-Ring Kit5007
Replace or repair O-ring seals
Gap/void filling or pipe insulation Detect gas leak?
Fill holes, smoothwelds, repair non-structural defects?
Stop pipe leaks?
Emergency Repair Products■ Enables rapid repair of damaged or burst pipes, conveyor or
drive belts and similar rubber-based components■ Will seal leaks in tanks and other containment vessels in addition to
repairing metal parts■ Includes a kit for repairing or replacing damaged O-ring seals
and a gas leak detector
Loctite® 3463Metal Magic Steel™ stickWorking time 3 minutes -sets in 10 minutes. Steel filled kneedable stick.Adheres to damp surfacesand cures underwater. Chemical and corrosionresistant.
Can be drilled, filed andpainted.
It is ideal for emergency sealing of leaking tanks andpipes.
Smoothes welds, repairssmall cracks in castings andfills oversized bolt holes.ANSI/NSF Standard 61.
Loctite® 5070 Pipe Repair kitRepairs pipe leaks in 1 hour.
No tools required.
Maximum temperature120 °C.
Easy-to-use repair kit.
Use for temporary/mediumterm repair of leaking pipesand reinforcement of weakareas.
Loctite® 7100Leak DetectorFacilitates the detection ofboth micro-leaks and largerleaks in gas handlingsystems.
It will not cause subsequent corrosion and is recommen-ded for use with all gasesand gas mixtures exceptpure oxygen.
Loctite®
O-Ring kitSaves the need for complete disassembly.
Eliminates the need for aninventory of different sizedO-rings.
Joints resist water/oil and are as strong as the rubber itself.
Kit contains: 7 standard diameter sizes of nitrile cord,splicing jig, safety knife andLoctite® 406 instant adhesive.
Loctite® 5007PU-FoamIs a moisture-curing poly-urethane foam, whichexpands to fill and seal gapsand voids.
Recommended for sealingpipe entries in walls, insulating pipe-work andtanks, filling gaps around doors and windows,draught-proofing aroundpipework and cable runs.
Cured material can bemachined, sanded and painted.
Application Examples
Solution
46
Loctite® 97002 Hand-Held Cartridge Applicator (pneumatic)Dispenses all Henkel Loctite products packaged in a250 ml squeeze tube or in a300 ml cartridge.
Loctite® 97001Peristaltic Hand PumpThis hand-held applicator isa low-cost, precision bottletop applicator that mountseasily on the top of any Loc-tite® 50 ml or 250 ml bottle.
Loctite® 97006 Digital Syringe Dispenser SystemThis is a fully-integratedsystem that will dispenseproducts from water-thin topaste-thick from 10 ml plasticsyringes.
Loctite® 97262Needle Selection PackSelection of dispensingneedles which are used forthe application of HenkelLoctite products.
Equipment
■ Henkel Loctite dispensing equipment is specially designed to make application and use of Henkel Loctite products fast, precise, clean and economical
■ The following is a selection, from an extensive equipment range, of items most relevant to the products in this guide
structural adhesives in theircorrect proportions. Applica-tion is done without waste, inquantities determined by pro-duction needs
Loctite® 97121 Pinch valve ApplicatorA Pinch-valve with a pneu-matic actuator for use withLoctite® 97008 and 97009.
Loctite® 97033 UV Wand SystemHigh intensity spot curingsystem designed to emit UVAand visible light (blue light) for extremely fast curing.Ideal for high-volume production and short cycletimes.
Loctite® 97035 UVALOC Flood SystemIs a high intensity, bench top modular light cure system. Itis equipped with a 1000 Wmetal halide lamp. Designedto emit UVA, UVC and visiblelight. 47
Product Ordering Information■ Look for Henkel Loctite Product number on these pages! * Products with
NSF approval
Pr.-No. Product Name Pack-Size Order-No. IDH-No. Page Pr.-No. Product Name Pack-Size Order-No. IDH-No. Page
222 Threadlocker, Low Strength* 12 x 10 ml 267358 267358 10
222 Threadlocker, Low Strength* 50 ml 231501 231501 10
222 Threadlocker, Low Strength* 250 ml 267359 267359 10
243 Threadlocker, Medium Strength*, Liquid 12 x 10 ml 135279 135279 11
243 Threadlocker, Medium Strength*, Liquid 50 ml 135278 135278 11
243 Threadlocker, Medium Strength*, Liquid 250 ml 135357 135357 11
248 Threadlocker, Medium Strength*, Semi-Solid 9 g stick TBC TBC 11
248 Threadlocker, Medium Strength*, Semi-Solid 19 g stick TBC TBC 11
268 Threadlocker, High Strength*, Semi-Solid 9 g stick TBC TBC 11
268 Threadlocker, High Strength*, Semi-Solid 19 g stick TBC TBC 11
270 Threadlocker, High Strength*, Liquid 12 x 10 ml 267380 267380 11
270 Threadlocker, High Strength*, Liquid 50 ml 232515 232515 11
270 Threadlocker, High Strength*, Liquid 250 ml 267381 267381 11
2701 Threadlocker, High Strength, Liquid 10ml TBC TBC 11
2701 Threadlocker, High Strength, Liquid 50ml 234853 234853 11
2701 Threadlocker, High Strength, Liquid 250 ml 234855 234855 11
290 Threadlocker,Wicking 12 x 10 ml 267397 267397 10
290 Threadlocker,Wicking 50ml 233733 233733 10
290 Threadlocker,Wicking 250 ml 267398 267398 10
302 UV Adhesive 250 ml 88468 88468 20
3020 Gaskets Adhesive, Aerosol 400 ml 458645 458645 14
3022 Glass fibre Paste 165 g ** ** 34
3022 Glass fibre Paste 750 g ** ** 34
3024 Gelcoat Filler 165 g ** ** 34
3025 Marine Filler 150 g ** ** 35
3025 Marine Filler 665 g ** ** 35
3026 Marine Epoxy 150 g ** ** 35
3028 Glass Fibre Resin Kit Kit ** ** 35
322 UV Adhesive 250 ml 88301 88301 21
330 MULTI-BOND® Kit* 50/18 ml 230054 230054 22
330 Structural Adhesive, Toughened, non-mix* 315 ml 135407 135407 22
3421 A&B Structural Adhesive, General Purpose 50 ml 248211 248211 22
3421 A&B Structural Adhesive, General Purpose 200 ml 254055 254055 22
3421 A&B Structural Adhesive, General Purpose 400 ml 530376 530376 22
3421 A Structural Adhesive, General Purpose 1kg 431949 431949 22
3421 A Structural Adhesive, General Purpose 20 kg 431948 431948 22
3421 B Structural Adhesive, General Purpose 1kg TBC TBC 22
3421 B Structural Adhesive, General Purpose 20 kg TBC TBC 22
3430 A&B Structural Adhesive, Fast cure 2 x 24 ml 142517 142517 23
3430 A&B Structural Adhesive, Fast cure 50 ml TBC TBC 23
3430 A&B Structural Adhesive, Fast cure 200 ml TBC TBC 23
3430 A Structural Adhesive, Fast cure 1 kg TBC TBC 23
3430 B Structural Adhesive, Fast cure 1 kg TBC TBC 23
3450 A&B Structural Adhesive, Fast cure 2 x 25 ml 229177 229177 23
3463 Metal Magic Steel™ Stick 114 g 265628 265628 45
3471 A&B Metal Set S1, Putty 500 g 229176 229176 36
3472 A&B Metal Set S2, Pourable 500 g 229175 229175 36
3473 A&B Metal Set S3, Fast Cure 500 g 229174 229174 37
3474 A&B Metal Set M,Wear Resistant 500 g 195891 195891 37
3475 A&B Metal Set A1, Multi Purpose 500 g 229173 229173 37
3479 A&B Metal Set HTA, High Temperature Resistant 500 g 195826 195826 37
350 UV Adhesive 50 ml 267423 267423 21
350 UV Adhesive 250 ml 195551 195551 21
352 UV Adhesive 250 ml 195552 195552 21
401 Instant Adhesive, General Purpose* 10 x 3 g 87993 87993 19
401 Instant Adhesive, General Purpose* 20 g 135428 135428 19
401 Instant Adhesive, General Purpose* 50 g 233658 233658 19
401 Instant Adhesive, General Purpose* 500 g 135431 135431 19
406 Instant Adhesive, Elastomers 20 g 233695 233695 18
406 Instant Adhesive, Elastomers 500 g 135438 135438 18
4062 Instant Adhesive, Wicking 20 g 152922 152922 19
4062 Instant Adhesive, Wicking 500 g 234075 234075 19
431 Inst. Adhesive, General Purpose, High viscosity 20 g 261800 261800 19
431 Inst. Adhesive, General Purpose, High viscosity 500 g 234053 234053 19
454 Instant Adhesive, General Purpose Gel* 10 x 10 ml 231100 231100 18
454 Instant Adhesive, General Purpose Gel* 20 g 195678 195678 18
454 Instant Adhesive, General Purpose Gel* 300 g 88526 88526 18
454 Instant Adhesive, General Purpose Gel* 300 g 234443 234443 18
(Collapsable Cartridge)
480 Instant Adhesive, Peel Resistant 20 g 135250 135250 18
480 Instant Adhesive, Peel Resistant 500 g 135253 135253 18
4850 Flexible Instant Adhesive 20 g 373358 373358 19
4850 Flexible Instant Adhesive 500 g 373354 373354 19
5004 Thread Sealant, Plastic 125 g ** ** 12
5004 Thread Sealant, Plastic 250 g ** ** 12
5004 Thread Sealant, Plastic 500 g ** ** 12
5007 PU-Foam, white 600 ml 402690 402690 44
5062 Flexible Adhesive Sealant, Low Modulus, Black 310 ml 263178 263178 25