Solid Waste Management Department of Geology and Environment science at Islamic University of Gaza (IUG) - represent- -March 2007- Presented by Prof. Dr. Samir Afifi
Feb 10, 2016
Solid Waste Management
Department of
Geology and Environment science
at Islamic University of Gaza (IUG) -represent-
-March 2007-
Presented byProf. Dr. Samir Afifi
1/34
2- Waste Characterization 2- Waste Characterization
2-Waste Characterization
2.1 Introduction2.2 Waste Generation Rates 2.3 Waste Composition 2.4 Waste Trends
2/34
2- Waste Characterization 2- Waste Characterization
Main elements of waste characterization:• Waste sources and types • Waste generation rate• Waste composition
3/34
2- Waste Characterization 2- Waste Characterization
Important of waste characterization:
It is necessary to monitor and control existing waste management systems and to make regulatory, financial, and institutional decisions.
4/34
2- Waste Characterization 2- Waste Characterization
2.1 Waste sources and types
There are eight major classifications of solid waste generators based on waste source:
Residential, Industrial, Commercial, Institutional, construction and Demolition, Municipal services, Process, and Agricultural.
5/34
2- Waste Characterization 2- Waste Characterization
SourceTypical waste generators
Types of solid wastes
Residential Single and multifamily dwellings
Food wastes, paper, cardboard, plastics, textiles, leather, yard wastes, wood, glass, metals, ashes, special wastes (e.g., bulky items, consumer electronics, white goods, batteries, oil, tires), and household hazardous wastes
IndustrialLight and heavy manufacturing, fabrication, construction sites, power and chemical plants
Housekeeping wastes, packaging, food wastes, construction and demolition materials, hazardous wastes, ashes, special wastes
Table 1: Sources and Types of Solid Wastes
All of the above should be included as “municipal solid waste”.
6/34
2- Waste Characterization 2- Waste Characterization
SourceTypical waste generators
Types of solid wastes
Commercial Stores, hotels, restaurants, markets, office buildings, etc.
Paper, cardboard, plastics, wood, food wastes, glass, metals, special wastes, hazardous wastes
InstitutionalSchools, hospitals, prisons, government centers
Same as commercial
Construction and Demolition
New construction sites, road repair, renovation sites, demolition of buildings
Wood, steel, concrete, dirt, etc.
Continue Table 1: Sources and Types of Solid Wastes
All of the above should be included as “municipal solid waste”.
7/34
2- Waste Characterization 2- Waste Characterization
SourceTypical waste generators
Types of solid wastes
Municipal services
Street cleaning, landscaping, parks, beaches, other recreational areas, water and wastewater treatment plants
Street sweepings; landscape and tree trimmings; general wastes from parks, beaches, and other recreational areas; sludge
ProcessHeavy and light manufacturing, refineries, chemical plants, power plants, mineral extraction and processing
Industrial process wastes, scrap materials, off-specification products, slag, tailings
Continue Table 1: Sources and Types of Solid Wastes
All of the above should be included as “municipal solid waste”.
8/34
2- Waste Characterization 2- Waste Characterization
AgricultureCrops, orchards, vineyards, dairies, feedlots, farms
Spoiled food wastes, agricultural wastes, hazardous wastes (e.g., pesticides)
Continue Table 1: Sources and Types of Solid Wastes
9/34
2- Waste Characterization 2- Waste Characterization
MSW includes:Residential, commercial, industrial, institutional, construction, demolition, process, and municipal services.
10/34
2- Waste Characterization 2- Waste Characterization
• Some sources are commonly excluded, such as industrial, construction and demolition, and municipal services.• In high income countries, only 25 percent to 35 percent of the overall waste stream is from residential sources.
11/34
2- Waste Characterization 2- Waste Characterization
• If municipal waste stream includes construction and demolition waste, the quantity of waste is doubled.
12/34
2- Waste Characterization 2- Waste Characterization
2.2 Waste Generation RatesFactors Influence Waste Generation Rates:
• Socioeconomic development,
• Degree of industrialization,
• Climate.
13/34
2- Waste Characterization 2- Waste Characterization
• Greater the economic wealth and the higher percentage of urban population, the greater the amount of solid waste produced• Low income countries have the lowest percentage of urban populations and the lowest waste generation rates,
14/34
2- Waste Characterization 2- Waste Characterization
• As GNP increases toward the middle income range, the per capita waste generation rates also increase,
15/34
2- Waste Characterization 2- Waste Characterization
CountryGNP Per Capita
Current Urban
(1995 US $)MSW Generation(kg/capita/day)
Low Income4900.64Nepal2000.50
Bangladesh2400.49
Myanmar2400.45
Vietnam2400.55Mongolia3100.60
India3400.46
Lao PDR3500.69
China6200.79
Sri Lanka7000.89
CountryGNP Per Capita
MSW Generation(kg/capita/day)
Middle Income
1,4100.73
Indonesia9800.76
Philippines1,0500.52
Thailand2,7401.10Malaysia3,8900.81
High Income30,9901.64Korea, Republic of
9,7001.59
Hong Kong22,9905.07*Singapore26,7301.10
Japan39,6401.47*Enormous quantities of construction and demolition waste
Table 2: Current Urban Municipal Solid Waste Generation
16/34
2- Waste Characterization 2- Waste Characterization
2.3 Waste Composition• Factors Influence Waste Composition:• Geographical location,• Standard of living,• Energy source, and • Weather
17/34
2- Waste Characterization 2- Waste Characterization
Percentages based on a weighted average of the compositions for individual countries Compositions for municipal solid waste based on wet weight Different definitions and methodologies for determining composition
18/34
2- Waste Characterization 2- Waste Characterization
Figure 1: Waste Composition of Low, Middle, and High Income Countries
19/34
2- Waste Characterization 2- Waste Characterization
Conclusion • Low and middle income countries have a high percentage of compostable organic matter (40 to 85%)• Percentage of consumer packaging wastes increases relative to the population’s degree of wealth and urbanization.
20/34
2- Waste Characterization 2- Waste Characterization
Continue Conclusion • Presence of paper, plastic, glass, and metal becomes more prevalent in the waste stream of middle and high income countries.
21/34
2- Waste Characterization 2- Waste Characterization
Figure 2: Variations in Waste Generation and Composition
22/34
2- Waste Characterization 2- Waste Characterization
2.4 Waste Trends
Figure 3: United States Material Consumption Trends,
1900-89 (millions of tones)
23/34
2- Waste Characterization 2- Waste Characterization
• Japan has experienced waste trends comparable to the United States. Waste quantities were rising until 1970, declined temporarily after the 1973 energy crisis, and then rose again slightly.
• Since 1990, generation rates have stabilized due to an economic slow-down and the implementation of waste reduction policies.
24/34
2- Waste Characterization 2- Waste Characterization
Figure 4: China City Waste Composition
25/34
2- Waste Characterization 2- Waste Characterization
• China is also experiencing rapid population and economic growth. Consequently, municipal solid waste is increasing in excess of 10 percent per year.
26/34
2- Waste Characterization 2- Waste Characterization
• MSW quantities have increased from 1.19 million tones in 1985 to 1.50 million tones in 1993• Composition shifting towards plastic and paper packaging a reflection of improved living standards.
27/34
2- Waste Characterization 2- Waste Characterization
CountryGNP Per Capitain 2025( US $)
2025 UrbanPopulation(% of Total)
2025 UrbanMSW Generation(kg/capita/day)
Low Income
1,05048.80.6-1.0
Nepal36034.30.6
Bangladesh44040.00.6
Myanmar58047.30.6
Vietnam58039.00.7
Mongolia56076.50.9
India62045.20.7Lao PDR85044.50.8
China1,50054.50.9
Sri Lanka1,30042.61.0
Middle Income
3,39061.10.8-1.5
Indonesia2,40060.71.0
Philippines2,50074.30.8
Thailand6,65039.11.5
Malaysia9,40072.71.4
High Income
41,140
88.21.1-4.5
Korea, Republic of
17,600
93.71.4
Hong Kong31,000
97.34.5
Singapore36,000
100.01.1
Japan53,500
84.91.3Table 3: 2025 Urban Per Capita Municipal Solid Waste Generation
28/34
2- Waste Characterization 2- Waste Characterization
Waste generation rate for low income countries increase by approximately 0.2 kg per day
Packaging wastes, such as paper, plastic, and glass, will increase as economies increase
29/34
2- Waste Characterization 2- Waste Characterization
Middle income countries should anticipate increase of about 0.3 kg/c.dOverall, waste composition is predicted to become even more variable as the percentage of compostable matter declines, and packaging wastes, especially paper and plastic, increase.
30/34
2- Waste Characterization 2- Waste Characterization
Figure 5: Total Waste Quantities and Volumes Generated by Low, Middle and High Income Countries (per day)
31/34
2- Waste Characterization 2- Waste Characterization
MSW Status By 2025:•Urban populations from low and middle income countries will triple their current rate of MSW generation•Low income countries will generate more than twice as much MSW than all of the middle and high income countries
32/34
2- Waste Characterization 2- Waste Characterization
Continue MSW Status By 2025:•Such a dramatic increase will place enormous stress on limited financial resources and inadequate waste management systems.•Per capita MSW generation rate in high income countries is expected to remain stable or even decrease slightly due to the strengthening of waste minimization programs.
33/34
2- Waste Characterization 2- Waste Characterization
Continue MSW Status By 2025:•Overall MSW composition for high income countries is predicted to be relatively stable; •A different trend when comparing waste volume; Average waste densities of 500 kg/m3, 300 kg/m3, and 150 kg/m3 were used to calculate the volume of waste generated for low, medium, and high income
34/34
2- Waste Characterization 2- Waste Characterization
Continue MSW Status By 2025:•Low income countries currently produce the highest quantity of waste on mass basis; high income countries generate the most waste on volumetric basis.•Increase in volume result of paper, plastics, bulky wastes, and other multi-material packaging in high income countries. Low and middle income countries have a larger percentage of high density organic matter and ash residues