Page 1
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment
Solid Pharma Handing Equipment
www.saintyco.com
Contents: 1. SMG‐H Series High Shear Mixer Granulator w/Conic Mill 2. FG Series Fluid‐Bed Dryer( Drying Only) 3. FBG Series Fluid‐Bed Granulator with Top Spray system 4. NTF‐200/800 Pharma Lifter‐For Fluid‐bed Granulator Bowl 5. FZB Series Fritz/Conic Mill 6. FZ Series Fritz/Conic Mill 7. HZD Pharma IBC Blending System 8. HTD Post Bin Blender 9. HDD Single Arm Bin Blender 10. HSD Bench Top Blender 11. NTG Drum Lifting Column‐Fixed only in the floor 12. NTY Drum Lifting Column ‐Moveable
13. NTS Pharma Lifter‐Telescopic&Moveable14. NTD Pharma Lifting Column‐For Bin 15. NTC Pharma Lifter‐Between Floors 16. Pharma Bin‐LDZ 17. Pharma Bin‐LDT 18. Round IBC Bin‐LDC 19. Square IBC Bin‐LDF 20. Round Tablets Bin‐LDP 21. Pharma Bin‐LDS 22. Drum‐LT 23. QY‐5 Moveable&Semi‐Auto Washer for Bin and container 24. QD Series Automatic Washing Station for IBC Bin 25. Trolley Mounted CIP/WIP System
Page 2
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment SMG-H Series High Shear Mixer Granulator w/Conic Mill
Usage:
SMG‐H Series high shear mixer granulator is used in pharmaceutical solid dosage area for mixing and granulation application. It’s the major processing equipment in solid dosage production line. The equipment is PLC automation controlled and well satisfies the current SMG‐H P and Pharmacy Code regulation.
Features: 1. Cylinder & conical material container structure, Z shaped mixing impeller, together forms the perfect mixing and granulation
performance with qualified wet granules. 2. Modular designed platform and on‐line wet cone mill option satisfies with various process and facility conditions. 3. Pressured spray, manual or other requested binder loading sys option satisfies with various product & granulation requests. 4. Designed with granulation end‐point detection function, satisfies with the process reproducibility request. 5. Designed with self‐vent vacuum loading sys for raw material, reduce the labor and avoids dust and cross contamination, satisfies with
the current GMP clean production request. 6. Compound mechanical & air sealing structure avoid any material leakage and cross contamination, satisfies with the current GMP
clean production request. 7. Variable impeller & chopper speed controlled by VFD and setup from HMI, satisfies with various product mixing & granulation
requests.
Working Principle: The raw material is loaded into the container via self vent vacuum sys(in case this option selected), or other loading sys as requested; and mechanically fluidized inside the container under the impeller force, which realizes the perfect mixing performance. Loading the binder into the container and starts the chopper; The material coheres together by the binder which forms the binder bridge for form the core granules. Under the mechanical energy conversion, the qualified granule grows up and formed.
TMain Technical Data T
Volume(L) Working Volume(L)
Mixing(Rpm)Mixing
Power(Kw) Chopper(Rpw)
Chopper Power(Kw)
SMG‐H25 25 10~20 50‐420 2.2 1000‐2500 1.1
SMG‐H 50 50 20~40 50‐355 5.5 1000‐2500 1.5
SMG‐H 100 100 40~80 50‐287 11 1000‐2500 3.0
SMG‐H 200 200 80~160 50‐223 18.5 1000‐2500 4
SMG‐H 300 300 120~240 50‐200 22 1000‐2000 5.5
SMG‐H 400 400 160~320 50‐200 30 1000‐2000 5.5
SMG‐H 500 500 200~400 30‐172 37 1000‐2000 7.5
SMG‐H 600 600 240~480 30‐162 45 1000‐2000 7.5
SMG‐H 800 800 320~640 20‐148 55 1000‐2000 11
SMG‐H 1200 1200 480~960 20‐133 75 1000‐2000 15
Page 3
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment FG Series Fluid-Bed Dryer( Drying Only)
Application:
FG Series Fluid‐Bed Dryer is one of the main process equipments in the
solid dosage production procedure in pharmaceutical industry, and is also
widely used in chemical, foodstuff industries, etc. This equipment is set
with mixing and drying functions.
Main Technical Parameters FG5 FG15 FG30 FG60 FG120 FG200 FG300 FG500
Materials Bowl Volume L 22 45 100 250 420 670 1060 1500
Production capacity Kg/batch 5 15 30 60 120 200 300 500
Pressure Mpa 0.4~0.6 Steam
Consumption Kg/h 18 33 166 166 213 405 686 400
Pressure Mpa 0.45~0.6 Compressed air
Consumption Kg/h 0.3 0.6 1 1 1 1 1.8 1.5
Fan power Kw 5.5 7.5 11 18.5 18.5 30 45 55
W mm 820 870 1200 1460 1650 1890 2090 2300
H mm 2250 2350 3130 3865 3900 4520 4850 5450 Outline
dimensions Ø mm 500 550 800 1000 1200 1400 1600 1800
Principle:
This equipment is composed of main machine (Processor), air handling
unit (AHU), heating and control systems. When operating, charge the
materials into the FBD Bowl, set the procedure and parameters according
to process requirements and then, start the processor. The inlet air is
filtered by the air handling unit (AHU) and heated by the heating system,
and then the processed air enters the processor to blow up materials into
fluidization condition. Materials are apace dried and moisture rapidly
vaporized. When the operation has been finished according to the set
procedure and parameters; move out the FBD Bowl to lock with NTF
Series FBD/FBG Bowl Post hoist for lifting and discharging the produced
granules. During the whole process, powder dust and cross pollution are
effectively controlled.
Features:
This equipment is successfully designed on the basis of a wide research,
absorption and digestion of foreign advanced models. It has a reasonable
structure with stable performances and easy operation; the whole
machine has no dead angle or protruded screws. PLC is designed to ensure
a fully automatic control. All the operations are automatically finished
according to the customer’s set parameters; moreover, process
parameters can be printed and records of original data are fully true and
reliable. FG Series Fluid‐Bed Granulators comply entirely with GMP
requirements for medicine production.
Page 4
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment FBG Series Fluid-Bed Granulator with Top Spray system
Features:
Fluid Bed Dryer offer the outstanding advantages of efficiency and product uniformity
achieved with fluid bed dryers. The process uses high‐pressure air to atomize a liquid
binder solution creating binder droplets in a fluidized particle bed creating liquid
bridges between the discrete particles and increasing granule size. The advantage of
this process is two unit operations (drying and granulating) are accomplished in a
single processing step. Granules produced by this method are highly porous and quick
solvable, which is widely used in pharmaceutical, chemical and foodstuff industries
worldwide.
Fluid Bed Dryers are commonly used for process applications, which require excellent
product uniformity, particle size, moisture content and morphology. These granulators
are ruggedly and precision built to achieve consistent batch‐to‐batch repeatability. This
granulation technology has also been applied in the food ingredient, agricultural,
nutritional and powdered chemical industries.
Main parameter FBG‐15 FBG‐30 FBG‐60 FBG‐120 FBG‐200 FBG‐300 FBG‐500
Volume (L) 45 100 220 420 670 1000 1500 Material Container
Dimension (mm) 750 800 1000 1200 1400 16000 1800
Capacity (Kg/batch) 15 30 60 120 200 300 500
Pressure (Mpa) 0.4‐0.6 Steam
Steam flow (kg/h) 20 60 120 140 180 310 400
Pressure (Mpa) 0.4‐0.6 Compression air
Steam flow (m3/min) 0.6 0.6 0.9 0.9 1.1 1.1 1.5
Blower (kw) 3 5.5 11 18.5 22 30 45
Heater (kw) 12 21 30 48 87 163 185
Noise (db) less than 75 db
A 1900 2100 2250 2650 2800 3500 4000
B 1350 1800 2400 3200 3800 4200 4200
C 380 420 480 500 520 600 680
D 700 1100 1320 1420 1640 2000 2260
Tower Dimension (mm)
E 700 860 1000 1200 1400 1600 1800
Page 5
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment NTF-200/800 Pharma Lifter-For Fluid-bed Granulator Bowl
Features:
It's made of austemitic stainless steel. There is no dead angle, no concave‐convex face, no
screw on surface. It's easy to wash. Tailor‐made butterfly valve with no dead angle, no
remnant, and appliance against wrong way operation is easy to dismantle and wash.
Especially equipped with cone adapter with sealing set and butterfly valve for the bowl of
FBG or FBD, the dust and cross pollution are well controlled. The surface contacting with
materials is polished to high quality. Roughness degree inside is Ra≤0.2μm,and outside is
Ra≤0.4μm.it's easy to wash. NTF series Pharma Lifter is the brand‐net successfully
developed type by our company widely researching, absorbing and digesting foreign
updated models. It's authenticated by the Provincial Science Committee to be of
"reasonable design, compact structure, steady performance, beautiful form, easy to wash;
main technical level reaches to the world similar products of 1990s".It's in conformity with
GMP requirements.
Main Technical Specifications NTF‐200 NTF‐300 NTF‐500 NTF‐800
S 3210 3210 3400 3400
H 2500 2500 2500 2500
L 3500 3600 3750 3850
A 1080 1180 1400 1500
B 2260 2460 2850 2950
C 750 750 750 750
Load(Kg) 200 300 500 800
Power(Kw) 2.2 2.2 3 3
Weight(Kg) 900 1100 1400 1600
Usage: NTF series Pharma Lifter is mainly used in pharmaceutical industry for shifting,
transferring the operated granules out from the bowl of fluid‐bed granulator or dryer
and charge for the next processing equipment. It can be used along with such main
processing equipments as flued‐bed granulator of dryer and shift materials to the
next processing equipment. Meanwhile, it can be widely used in such areas as raw
medicine material industry, chemical industry, foodstuff industry, etc.
Principle: NTF series Pharma Lifter consists of fixed chassis, post, hydraulic system, turnover
structure, horizontal gyration structure and skid appliance, etc. It's especially
equipped with cone adapter with sealing set and butterfly valve for the bowl of FBG.
To start to work, cover and bowl of FBG/FBD with the cone adapter and seal them
tightly to form an integrated hopper. Switch on the lifting handle, the hopper is
lifted; then switch on the turnover handle, the hopper turns over 180°.Unfix the skid
appliance on the chassis by foot, gyrate to the post horizontally, and fix the outlet of
the cone adapter with the inlet of the next processing equipment. Open the
butterfly valve on the cone adapter, materials flow out fluently into the next
equipment. It's in conformity with GMP requirements.
Page 6
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment FZB Series Fritz/Conic Mill
Parameters FZB‐150 FZB‐300 FZB‐450 FZB‐700 FZB‐1000
Capacity 15‐150 kg/hr 30‐300 kg/hr 45‐450 kg/hr 70‐700 kg/hr 100‐1000 kg/hr
Granularity 6‐80 mesh
Temp. Rise (C) < 30
Range of Speed 300~3600 rpm
Power 1.5 kw 1.5 kw 2.2 kw 3.0 kw 5.5
Dimension 720 * 445 *1345 810 * 445 * 1345 920 * 445* 1430 1000 * 500 * 1530 1100*600*1875
Height of discharge hopper
from the ground level 650 mm 650 mm 690 mm 690 mm 700 mm
General description: FZB Series cone mill is used in pharmaceutical, food, fine chemical
processing industries. This machine reaches the world advanced level and
conforms to the GMP specification. It is completely made of stainless steel
material.
Working principle: The material to be processed enters into the feed inlet of grinding and
granulating machine, drops into the conical sieve chamber. The rotary
knife plays a whirling action to the material, and throws the granules to
the sieve mesh surface by centrifugal force, The granulates are ground into
particles by the shearing action produced by the rotary knife and the sieve
mesh, and discharged through the sieve apertures. The size of ground
particles can be adjusted by the sieve mesh number, the gap between
rotary knife and sieve mesh, and the rotary speed.
Usage: Pharmacy:
Grinding of raw material
Granulating of wet material
Granulating of dry material
Unqualified tablets to be recycled can be granulated
according to the requirement of granularity
Food:
Grinding of biscuit for recycling
Others: Grinding and granulating of rough raw material
Grinding and granulating of lump raw material.
Features: Thoroughly solving the tough problem of material
contaminated by the debris of worn sieve mesh in a
pendulum‐type granulating machine.
The unique patented shaft sealing technology ensures no
leakage of lubrication oil.
Easy to control granularity
No retention dead corner, no material overheating.
Less dust, no vibration, low noise.
High efficiency, energy saving, large production capacity.
Attractive appearance ,easy to clean
type machine apply to the work requirements of 100‐grade
workshop.
Page 7
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment FZ Series Fritz/Conic Mill
Brief Description:
FZ Series Milling and Granulating Machines are widely used in
pharmaceutical, food, and fine chemical processing industries. It
is completely made of high quality stainless steel and built
strictly conformed to the current cGMP standard. It is one of the
most necessary solid dosage processing equipment in re‐sizing
the granules, re‐granulating unqualified tablets or retrieve
powder from unqualified capsules.
Working Principle:
The material to be processed enters into the feed inlet of
grinding and granulating machine, which drops into the conical
sieve chamber. The rotary knife rotates a whirling action to the
material, and place the granules to the sieve mesh surface by
centrifugal force. The granules are grinded into particles by the
shearing action produced by the rotary knife, the sieve mesh,
and discharged through the sieve apertures. The size of particles
can be adjusted by the sieve meshes as shown below.
Parameters FZ‐150 FZ‐300 FZ‐450 FZ‐700 FZ‐1000
Capacity 15‐150 kg/hr 30‐300 kg/hr 45‐450 kg/hr 70‐700 kg/hr 100‐1000 kg/hr
Granularity 6‐80 mesh
Temp. Rise (C) < 30
Range of Speed 300~3600 rpm
Power 1.5 kw 1.5 kw 2.2 kw 3.0 kw 5.5
Dimension 720 * 445 *1345 810 * 445 * 1345 920 * 445* 1430 1000 * 500 * 1530 1100*600*1875
Height of discharge hopper
from the ground level 650 mm 650 mm 690 mm 690 mm 700 mm
Page 8
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment HZD Pharma IBC Blending System
Features: HZD series Bin Blender is the brand‐new successfully type by our company widely researching, absorbing and digesting foreign updated models. It has compact structure, steady performance and is convenient to operate. It can adapt to the mixing demand of large output and diversity products. And the working efficiency is improved. There is no dead angle, no concave‐convex face and no screw on surface. All angles are cambered. The surface outside and inside is polished to high quality. Roughness degree inside is Ra≤0.2μm,and outside is Ra≤0.4μm.Applying sealing appliance made of silicon latex on the cover of the bin to gain a good airproof quality. It's easy to wash. The mixing efficiency reaches to 99%, and charging coefficient ranges from50%to 80%.Applying infrared appliances to gain an isolated working area, and butterfly valve against wrong way operation, controlled by PLC control system. This makes a sure safe operation. All the crafts are finished in the same container to avoid the frequent charging, shifting and transferring. This has avoided dust and cross pollution and materials layering, optimized the producing flow. It's in conformity with the GMP requirements.
Main Technical Specifications HZD‐400 HZD‐600 HZD‐800 HZD‐1000 HZD‐1200 HZD‐1500 HZD‐1800 HZD‐2000
B 1820 1900 2050 2070 2180 2180 2220 2350
C 2410 2540 2710 2760 2940 3050 3180 3420
H 2810 2980 3210 3350 3500 3560 3620 3860
L. 2470 2940 2940 3310 3310 3500 3500 3500
E 460 210 350 470 510 480 500 620
R 1950 2330 2470 2590 2630 2780 2800 2900
F 1100 1440 1440 1440 1440 1550 1550 1550
G 420 520 520 520 520 600 600 600
Volume(L) 400 600 800 1000 1200 1500 1800 2000
Power(Kw) 4 5.5 5.5 5.5 5.5 7.5 7.5 7.5
Weight(Kg) 1800 2500 2800 3000 3200 3700 4000 4200
Usage: HZD series Bin Blender can automatically finish the whole process of clamping, lifting, mixing and falling, etc. Equipped with one set of HZD series Bin Blender and applying some different models of bins, pharmaceutical enterprises can satisfy with the mixing demands of large output and diversity products. It's the desirable final mixing equipment for pharmaceutical factories. Meanwhile, it can be widely used in such areas as raw medicine material industry, chemical industry, foodstuff industry, etc. Principle: HZD series Bin Blender consists of shelf, rotary frame, driving system, lifting system, braking system and PLC control system, etc. To start to work, put the bin into the rotary frame, and press the confirmation button on the touch screen. The bin is then lifted to the required height and clamped. The driving sys tem starts to work and mix according to time and speed assigned in advance after the pressure sensors receive signal of tightly clamped. Reaching to the parameters assigned, the braking system starts to work and the rotary frame stops vertically. The mixing craft is over. The lifting system then works accordingly to lay down the bin. Pull the bin out from the rotary frame(can also separate materials from the bin directly in the frame)and the printer types the entire craft data. The working cycle finishes. The structure trait of HZD series Bin Blender is that the rotary frame(bin) and the mixing axis make of an angle, the movement of the materials inside the bin contains not only overturn, but tangent movement along the wall of bin. This gains it a perfect mixing efficiency effect.
Page 9
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment HTD Post Bin Blender
Application:
This equipment can execute automatically raising, blending and lowering tasks.
One main machine can be configured with multi‐bins, so varietal blending can be
satisfied, consequently it is considered as the ideal blending equipment in
pharmaceutical industry. It is also widely used in chemical, foodstuff industries,
etc.
Principle:
This equipment is composed of column, frame, slewing fork mounting; drive,
brake and control systems, etc. When operating, load the bin on the blending
carriage and lock the nuts, and start the control system, the blending carriage is
automatically raised to the blending height and reliably positioned. Then the
drive system starts blending task according to the set time and rotation speed.
All the set parameters have been reached, the brake system operates
automatically to stop the blending carriage being a horizontal position and the
blending task is finished. Then, the lifting system works to lower the bin on the
ground and stops automatically on reaching that position. Finally, data of this
batch are printed. Unfasten the nuts of the bin blending fork carriage and move
out the bin to transfer it for the next process.
Features:
This equipment is successfully designed on the basis of a wide research,
absorption and digestion of foreign advanced models. It has a reasonable
structure with stable performances and easy operation; the whole machine has
no dead angle or exposed screws. Structural characteristics of this equipment
are: the bin is tilted 30° as compared with the rotation axis, the materials
perform a double movement inside the bin: a constant and intense turn over
following the frame rotation and also a relatively high tangential motion along
the bin wall to realize an optimal blending effect. PLC, also infrared safety device
and a device avoiding misoperation of butterfly valve are designed to ensure a
fully automatic control and a safe production. All processes of the materials are
finished in a same container without frequent materials transfer, charging and
shift. Consequently, powder dust or cross pollution are effectively controlled to
reduce materials losses, and on the other hand, an effective control of materials
layers is achieved. Finally, the production process has been greatly optimized.
HTD Series Post Bin Blenders comply entirely with GMP requirements for
medicine production.
Parameters L W W1 W2 L1 H H1 H2 H3 H4 Blending speed(rpm) Net load(Kg) Power(Kw) Weight(T)
HTD‐50 2120 1400 1040 800 600 2000 250 750 1500 2800 3~20 25 3.7 0.6
HTD‐100 2120 1400 1040 800 600 2000 250 750 1500 2800 3~20 50 3.7 0.7
HTD‐200 2400 1800 1040 800 600 2300 350 750 1950 2800 3~20 100 4.4 0.8
HTD‐300 2420 1900 1220 800 600 2300 350 750 2100 2800 3~20 150 4.4 0.9
HTD‐400 2535 2100 1300 800 600 2300 350 750 2250 2800 3~20 200 5.2 1
HTD‐500 2580 2200 1435 800 600 2300 350 750 2350 2800 3~15 250 5.2 1.2
HTD‐600 2680 2400 1500 800 600 2300 350 750 2500 3000 3~15 300 5.2 1.3
HTD‐800 2850 2500 1580 800 600 2500 400 750 2650 3000 3~15 400 7 1.6
HTD‐1000 3010 2700 1720 900 820 2700 400 750 2800 3000 3~10 500 7 2
HTD‐1500 3200 2800 1800 900 1500 2800 400 750 2800 3000 3~10 750 6.2 2
HTD50‐800
HTD‐1500 LDT Pharma Bin
Page 10
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment HDD Single Arm Bin Blender
Usage:
HDD series Bin Blender can automatically finish the whole process of clamping,
lifting, mixing and falling, etc. Equipped with one set of HDD series Bin Blender and
applying some different models of bins, pharmaceutical enterprises can satisfy with
the mixing demands of large output and diversity products. It's the desirable final
mixing equipment for pharmaceutical factories. Meanwhile, it's widely used in such
areas as chemical industry, raw medical material industry, foodstuff industry, etc.
Principle: HDD series Bin Blender consists of shelf, rotary frame, driving system, lifting system,
and PLC control system, etc. To start to work, put the bin into the rotary frame, and
press the confirmation button on the touch screen. The bin is then lifted to the
required height and clamped. The driving system starts to work and mix according to
time and speed assigned in advance after the pressure sensors receive signal of
tightly clamped. Reaching to the parameters assigned in advance, the rotary frame
stops vertically. The mixing craft is over. The lifting system then works accordingly to
lay down the bin. The printer types the entire craft data automatically and reliable.
The working cycle finishes. Features: HDD series Bin Blender can clamp bins of different model and volume. Thus
gain it adapts to the mixing demands of large output and diversity products.
And the working efficiency is improved. There is no dead angle, no
concave‐convex face and no screw on surface. All angles are cambered. The
surface outside and inside is polished to high quality. Roughness degree
inside is Ra≤0.2μm,outside is Ra≤0.4μm.Applying sealing appliance made of
silicon latex on the cover of the bin to gain a good airproof quality. It's easy to
clean. The mixing coefficiency reaches to 99%, and charging coefficient
ranges from 50% to 80%.Applying infrared appliances to gain an isolated
working area, and butterfly valve against wrong way operation, controlled by
PLC control system. This makes a sure safe operation. It's in conformity with
the GMP requirements.
Main Technical Specifications HDD‐400 HDD‐600 HDD‐800 HDD‐1000 HDD‐1200
A 1300 1340 1340 1500 1500
B 1200 1400 1400 1400 1400
C 1700 1800 1800 1900 1950
D 2460 2800 2920 3220 3250
L 2700 2900 2951 3054 3620
H 2300 2400 2460 2610 2630
Volume(L) 400 600 800 1000 1200
Power(Kw) 4 5.5 5.5 5.5 5.5
Weight(Kg) 1600 2000 2400 2700 2900
Page 11
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment HSD Bench Top Blender
Application: This equipment is mainly used in the solid dosage production procedure for
mixing granules with powder, granules with granules and powder with
powder, consequently it is considered as the ideal mixing equipment for
pharmaceutical laboratory. It is also widely used in chemical, foodstuff
industries, etc.
Principle: This equipment is composed of frame, drive and control systems, and fixed
mixing bin, etc. When operating, charge the materials and lock the bin lid.
Set the mixing time and speed, start the control system to execute the
operation. On reaching the set time, the fixed bin stops being a horizontal
position and the mixing task is finished.
Features: This equipment is successfully designed on the basis of a wide research, absorption
and digestion of foreign advanced models. It has a reasonable structure with stable
performances and easy operation; the whole machine has no dead angle or exposed
screws. Structural characteristics of this equipment are: the bin is tilted 30° as
compared with the rotation axis, the materials perform a double movement inside
the bin: a constant and intense turn over following the frame rotation and also a
relatively high tangential motion along the bin wall to realize an optimal blending
effect. A device avoiding misoperation of the butterfly valve is designed to ensure a
safe production. All processes of the materials are finished in a same container
without frequent materials transfer, charging or shift. Consequently, powder dust or
cross pollution are effectively controlled to reduce materials losses, and on the
other hand, an effective control of materials layers is achieved. Finally, the
production process has been greatly optimized. HSD Series Laboratory Mixers
comply entirely with GMP requirements for medicine production.
Main Technical Parameters
Main Structural Dimensions Blending speed
Net load
Total power
Machine weight Model
L L1 W W1 W2 H H1 H2 H3 DN rpm kg kw kg
HSD5 950 740 570 250 450 1000 470 980 830 50 3~25 2.5 0.25 150
HSD10 1050 740 650 340 450 1050 410 980 800 50 3~25 5 0.25 160
HSD15 1050 740 650 350 450 1050 410 980 880 50 3~25 7.5 0.25 170
HSD20 1150 740 700 420 450 1050 360 980 820 75 3~25 10 0.25 180
HSD25 1150 740 700 420 450 1050 370 980 880 75 3~25 12.5 0.55 185
HSD30 1150 740 700 430 450 1050 370 980 925 75 3~25 15 0.55 190
HSD50 1350 940 880 600 700 1320 440 1315 1085 100 3~25 25 0.55 200
HSD75 1350 940 1050 600 700 1415 370 1315 1155 100 3~25 37.5 0.75 230
HSD100 1550 940 900 770 700 1350 440 1315 1125 200 3~20 50 0.75 250
LDS Pharma Bin
HSD5‐100
Page 12
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment NTG Drum Lifting Column-Fixed only in the floor
Features: This equipment is successfully designed on the basis of a
wide research, absorption and digestion of foreign
advanced models. It has a reasonable structure with stable
performances and easy operation; the whole machine has
no dead angle or protruded screws. To ensure a safe
production, it is also designed with a device avoiding
misoperation of the butterfly valve which is easy to
dismantle and wash. Consequently, powder dust or cross
pollution are effectively controlled to optimize the
production process. NTG Series Pharma Lifters, stationary
comply entirely with GMP requirements for medicine
production.
Automatical discharge Valve of the drum optional
Main Technical Parameters
Main structural dimensions Lifting Capacity
(with drum) Total power Machine weight
Model
L L1 L2 W H H1 H2 H3 DN kg kw kg
NTG50 1800 420 1100 600 3200 2200 2550 2985 150 50 1.5 270
NTG100 1920 500 1100 700 3400 2200 2550 3150 200 100 2 340
NTG150 1920 500 1100 700 3510 2200 2550 3260 200 150 2.2 340
NTG200 1920 500 1100 700 3510 2200 2550 3320 200 200 2.5 340
NTG300 1920 500 1100 700 3150 2200 2550 3500 200 300 2.5 340
Application: This equipment is mainly used in the solid dosage production procedure
for transferring and discharging materials, consequently it is operated
with corollary equipments such as granulator, blender, tablets press,
capsule filling machine, etc. Pharma Lifters, stationary are widely used in
pharmaceutical, chemical, foodstuff industries, etc..
Principle: This equipment composed of chassis, column and drum inversion
system. When operating, lock first the drum with the cone adapter, then
press “Raise” button to raise the drum. When it’s raised in position,
press the “ Invert”button to invert it 180°and slew the column to swivel
the drum over the inlet of the next processing equipment, then open
the butterfly valve to discharge the materials into the next processing
equipment.
Page 13
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment NTY Pharma Lifter-Moveable
Features: This equipment is successfully designed on the basis of a wide research,
absorption and digestion of foreign advanced models. It has a
reasonable structure with stable performances and easy operation; the
whole machine has no dead angle or exposed screws. To ensure a safe
production, it is also designed with a device avoiding misoperation of
the butterfly valve which is easy to dismantle and wash. Consequently,
powder dust or cross pollution are effectively controlled to optimize the
production process. NTY Series Pharma Lifters, movable comply entirely
with GMP requirements for medicine production.
Main Technical Parameters NTY‐50 NTY‐100
A 500 600
B 1700 2000
C 650 750
L 1950 1950
H 1800 1800
S 2570 2750
Load(kg) 50 100
Power(Kw) 0.75 1.5
Weight(kg) 310 420
Application: This equipment is mainly used in the solid dosage production procedure
for transferring and discharging materials, consequently it is operated
with corollary equipments such as blender, mill facility, coater, tablets
press, capsules filling machine, etc. Pharma Lifters, movable are widely
used in pharmaceutical, chemical, foodstuff industries, etc.
Principle: This equipment is composed of chassis trolley, lifting and drum inversion
systems. When operating, lock first the drum with the cone adapter,
then press “Raise” button to raise the drum. When it’s raised in position,
press “Invert” button to invert it 180° and align the Pharma Lifter,
movable to dock to the inlet of the next processing equipment, and then
open the butterfly valve to discharge the materials.
Page 14
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment NTS Pharma Lifter-Telescopic&Moveable
Features:
It’s made of Austenitic stainless steel. There is no dead angle, no concave/convex face, and no
screws on the surface. Especially equipped with one cone adapter, a sealing set and butterfly
valve for tank, the dust and cross pollution are well controlled. Tailor‐made butterfly valve with
no dead angle, no remnant, and appliance against wrong way operation is easy to dismantle
and wash. Tailor‐made casters protect the floor from being destroyed or leaving stains.
Especially designed with oil collector, this has avoided the hydraulic oil polluting the clean area.
It’s authenticated by the Provincial Science Committee to be of “reasonable design, compact
structure, steady performance, beautiful for, easy to wash; main technical level reaches to the
world similar products of 1990s.”
Main Technical Specifications NTS‐50 NTS‐100
A 500 600
B 1710 2000
C 650 750
L 1950 1950
H 2500 2500
S 3270 3450
Load(Kg) 50 100
Power(Kw) 0.75 1.5
Weight(Kg) 370 470
Usage: NTS series Pharma Lifter is mainly used in pharmaceutical industry for transferring and
charging powder and granules. It can be used along with equipments such as blender,
mixers, mill cum sifter, tablet press, coating machines, capsule filling machines and so on.
Using the TS series Pharma Lifter has optimized the producing flow and avoided dust and
cross pollution. It’s the desirable transferring equipment in pharmaceutical industry for solid
dosage sector. Meanwhile, it can be widely used in such areas as raw medicine material
industry, chemical industry, and foodstuff industry.
Principle: NTS series Pharma Lifter consists of chassis trolley, telescopic post, hydraulic system,
turnover structure. To start to work, cover the tank with the cone adapter and seal them
tightly with hoop to form an integrated hopper. Switch on the lifting handle, the hopper is
lifter; then switch on the turnover handle, the hopper turns 180 º. Move the chassis trolley,
orientate it and fix the outlet of the cone adapter with the inlet of the next processing
equipment. Open the butterfly valve on the cone adapter, materials flow out fluently into
the next equipment. Especially designed with telescopic system, t his has enlarged working
scope.
Page 15
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment NTD Pharma Lifting Column-For Bin
Features:
It's made of austenitic stainless steel. There is no dead angle, no concave‐convex face, no screw on surface.
It's easy to wash tailor‐made butterfly valve with no dead angle, no remnant, and appliance against wrong
way operation is easy to dismantle and wash. All the crafts are finished in the same container to avoid the
frequent charging, shifting and transferring. This has avoided dust and cross pollution and materials
layering, optimized the producing flow. NTD series Pharma Lifter is the brand‐new successfully developed
type by our company widely researching absorbing and digesting foreign updated models. It's authenticated
by the Provincial Science Committee to be of "reasonable design, compact structure, steady performance,
beautiful form, easy to wash; mail technical level reaches to the world similar products of 1990s".It's in
conformity with GMP requirements.
Main Technical Specifications NTD‐600 NTD‐800 NTD‐1000 NTD‐1200 NTD‐1500 NTD‐1800 NTD‐2000
H 2500 2500 2500 2500 2500 2500 2500
S 1300 1340 1375 1525 1625 1770 2025
L 3400 3600 3600 3800 3800 3800 3800
A 1100 1100 1100 1100 1100 1100 1100
E 2040 2140 2240 2240 2240 2240 2240
C 750 750 750 750 750 750 750
Power(KW) 2.2 2.2 3 3 3 3 3
Siut Bin(L) 600 800 1000 1200 1500 1800 2000
Usage: NTD series Pharma Lifter is mainly sued in pharmaceutical industry for transferring and charging
powder and granules. It can be used along with such main equipments as bin blender, tablet press,
capsule filling machine and so on. Applying the NTD series Pharma Lifter has optimized the producing
flow, avoided dust and cross pollution. It's the desirable transferring equipment in pharmaceutical
industry for solid dosage sector. Meanwhile, it can be widely used in such areas as raw medicine
material industry, chemical industry, foodstuff industry, etc.
Principle: NTD series Pharma Lifter consists of fixed chassis, post, hydraulic system, turnover structure,
horizontal gyration structure and skid appliance, etc. To start to work, switch on the operation handle
on the control panel, the bin is lifted to the required height; then gyrate to the post horizontally.
Switch on the skid appliance on the fixed chassis by foot and fix the outlet of the bin with the inlet of
the next processing equipment. Open the butterfly valve on the bin, materials flow out fluently into
the next equipment. It has avoided dust and cross pollution and optimized the producing flow. It's in
conformity with GMP requirement.
Page 16
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment NTC Pharma Lifter-Between Floors
Features:
It's made of Austenitic stainless steel, contact parts are polished to high
quality. There is no dead angle, no concave‐convex face, no screw on surface.
It's easy to wash. The lengthened post specially isolated by curtain structure
to satisfy the requirements of clean area. Especially designed with oil
collector, this has avoided the hydraulic oil polluting the clean area. It equips
with electric inter‐lock system and upper and lower limit appliance to assure
the operation safety. It's in conformity with GMP requirements.
Main Technical Specifications NTC‐200 NTC‐300 NTC‐400 NTC‐600 NTC‐800 NTC‐1000
B 1600 1620 1650 1700 1750 1800
L 1200 1500 1800 1800 1800 1800
C 750 750 750 750 750 750
N 500 500 500 500 500 500
Load(kg) 200 300 400 600 800 1000
Power(Kw) 2.2 2.2 2.2 2.2 3 3
Usage: NTC series Pharma Lifer is mainly used in pharmaceutical industry for
transferring solid dosage materials (in bulk, sachet, bag, tank, etc)between
floors. Applying the NTC series Pharma Lifter has optimized the producing
flow, avoided dust and cross pollution. It's the desirable transferring
equipment in pharmaceutical industry for solid dosage sector. Meanwhile, it
can be widely used in such areas as raw medicine material industry, chemical
industry, foodstuff industry. etc.
Principle: NTC series Pharma Lifter consists of operation panel, lengthened post,
hydraulic system, material puller, electric inter‐lock system between floors,
etc. To start to work, pull the material in bulk, sachet, bag, or tank into the
puller, close the fence of the pallet. Switch on the lifting handle, the pallet is
lifted to the required height. The upper limit appliance then works safely, and
the pallet stops. Open the fence, pull out the materials and finish the
transferring craft.
Page 17
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment Pharma Bin-LDZ
To use with HZD Bin Blender
Volume Main structural dimensions Weight Parameters
L H1 H2 H3 ØD Ød W1 DN kg
LDZ300 300 1118 960 138 400 125 794 200 145
LDZ400 400 1287 1130 165 400 125 794 200 155
LDZ600 600 1366 1200 151 500 125 994 200 185
LDZ800 800 1545 1375 118 500 125 994 200 200
LDZ1000 1000 1586 1400 168 500 150 1194 250 248
LDZ1200 1200 1736 1550 181 500 150 1194 250 285
LDZ1500 1500 1868 1680 99 500 150 1194 250 312
LDZ1800 1800 1982 1800 141 500 150 1194 250 328
LDZ2000 2000 2238 2055 113 500 150 1194 250 355
Usage: LDZ Series Pharmaceutical Bin is one of the most popular shifting
containers used in the producing flow of solid dosage. It can be used along
with HZD series Bin Blender, HDD series Bin Blender, etc. Different
processing crafts for solid materials can be operated in the same container.
The frequent charging and discharging of materials are reduced thus
avoiding dust and cross pollution. It’s conformity with GMP requirements.
Features: It’s made of Austenitic stainless steel. All Angles are cambered. There is no
dead angle, con concave‐convex face and no screw on surface. The surface
outside and inside are polished to high quality. Roughness degree inside is
Ra = 0.2 µ m, and outside is Ra = 0.4 µ m. Applying sealing appliance made
of silicon latex on the cover to gain a good airproof quality. Tailor‐made
butterfly valve with no dead angle, no remnant, or appliance against
wrong way operation is easy to dismantle and clean. It’s in conformity with
GMP requirements.
Page 18
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment Pharma Bin-LDT
To use with HTD Bin Blender
Volume Main structural dimensions Parameters
L H1 H2 H3 L1 ØD Ød W1 DN
LDT50 50 714 500 130 630 200 100 394 150
LDT100 100 910 550 204 630 400 100 544 150
LDT200 200 946 700 100 770 400 100 694 200
LDT300 300 1258 800 180 788 400 125 694 200
LDT400 400 1318 850 166 888 400 125 794 200
LDT600 600 1475 950 163 988 500 125 894 200
LDT800 800 1508 1000 141 1088 500 125 994 200
LDT1000 1000 1672 1050 125 1210 500 125 1094 250
Usage: LDT Series Pharmaceutical Bin is one of the most popular shifting
containers used in the producing flow of solid dosage. It can be used along
with HTD series Post Bin Blender. Different processing crafts for solid
materials can be operated in the same container. The frequent charging
and discharging of materials are reduced thus avoiding dust and cross
pollution. It’s conformity with GMP requirements.
Features: It’s made of Austenitic stainless steel. All Angles are cambered. There is no
dead angle, con concave‐convex face and no screw on surface. The surface
outside and inside are polished to high quality. Roughness degree inside is
Ra = 0.2 µ m, and outside is Ra = 0.4 µ m. Applying sealing appliance made
of silicon latex on the cover to gain a good airproof quality. Tailor‐made
butterfly valve with no dead angle, no remnant, or appliance against
wrong way operation is easy to dismantle and clean. It’s in conformity with
GMP requirements.
Page 19
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment Round IBC Bin-LDC
Materials Storage, Transportation
Volume Main structural dimensions Parameters
L H1 H2 H3 ØD1 ØD1 Ød DN
LDC100 100 900 140 160 400 660 100 150
LDC150 150 992 140 167 400 750 100 200
LDC200 200 1104 140 167 400 750 100 200
LDC300 300 1106 185 87 400 900 125 200
LDC400 400 1261 185 87 400 900 125 200
LDC500 500 1416 185 87 400 900 125 200
LDC600 600 1468 185 231 500 1200 125 250
LDC800 800 1654 185 231 500 1200 125 250
LDC1000 1000 1654 185 81 500 1200 125 250
Usage: LDC Series Pharmaceutical Bin is one of the most popular shifting
containers used in the producing flow of solid dosage. Different processing
crafts for solid materials can be operated in the same container. The
frequent charging and discharging of materials are reduced thus avoiding
the dust and cross pollution. It’s conformity with GMP requirements.
Features: It’s made of Austenitic stainless steel. All angles are cambered. There is no
dead angle, no concave/convex face and no screw on the surface. The
surfaces outside and inside are polished to high quality. Roughness degree
inside is Ra =0.2 µ m, and outside is Ra= 0.4 µ m. Applying sealing
appliances made of silicon latex on the cover to gain a good airproof
quality. Tailor‐made butterfly valve with no dead angle, no remnant, and
appliance against wrong way operation is easy to dismantle and clean.
Page 20
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment Square IBC Bin-LDF
Materials Storage, Transportation
Volume Main structural dimensions Parameters
L H1 H2 H3 ØD Ød W1 DN
LDF100 200 1097 150 158 400 100 594 150
LDF300 300 1178 185 202 400 125 794 200
LDF400 400 1293 185 170 400 125 794 200
LDF600 600 1371 185 187 500 125 994 250
LDF800 800 1541 185 152 500 125 994 250
LDF1000 1000 1591 211 173 500 150 1194 250
LDF1200 1200 1741 211 186 500 150 1194 250
LDF1500 1500 1888 211 119 500 150 1194 250
LDF1800 1800 2088 211 103 500 150 1194 250
LDF2000 2000 2238 211 113 500 150 1194 250
Usage: LDF Series Pharmaceutical Bin is one of the most popular shifting
containers used in the producing flow of solid dosage. Different processing
crafts for solid materials can be operated in the same container. The
frequent charging and discharging of materials are reduced thus avoiding
the dust and cross pollution. It’s conformity with GMP requirements.
Features: It’s made of Austenitic stainless steel. All angles are cambered. There is no
dead angle, no concave/convex face and no screw on the surface. The
surfaces outside and inside are polished to high quality. Roughness degree
inside is Ra =0.2 µ m, and outside is Ra= 0.4 µ m. Applying sealing
appliances made of silicon latex on the cover to gain a good airproof
quality. Tailor‐made butterfly valve with no dead angle, no remnant, and
appliance against wrong way operation is easy to dismantle and clean.
Page 21
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment
Round Tablets Bin-LDP Tablets Storage, Transportation
Volume Main structural dimensions Parameters
L ØD1 ØD2 Ød DN H
LDP200 200 400 900 100 150 672
LDP300 300 400 900 100 150 738
LDP400 400 400 1200 100 150 858
LDP500 500 400 1200 100 150 959
LDP600 600 400 1200 100 150 1050
Usage: LDP Series Pharmaceutical Bin is one of the most popular shifting
containers used in the producing flow of solid dosage. Different processing
crafts for solid materials can be operated in the same container. The
frequent charging and discharging of materials are reduced thus avoiding
the dust and cross pollution. It’s conformity with GMP requirements.
Features: It’s made of Austenitic stainless steel. All angles are cambered. There is no
dead angle, no concave/convex face and no screw on the surface. The
surfaces outside and inside are polished to high quality. Roughness degree
inside is Ra =0.2 µ m, and outside is Ra= 0.4 µ m. Applying sealing
appliances made of silicon latex on the cover to gain a good airproof
quality. Tailor‐made butterfly valve with no dead angle, no remnant, and
appliance against wrong way operation is easy to dismantle and clean.
Page 22
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment
Pharma Bin-LDS To use with HSD Bin Blender
Volume Main structural dimensions Parameters
L H ØD1 ØD2 W
LDS2 2 151 101.6 38 150
LDS5 5 358 127 50 190
LDS10 10 384 127 50 260
LDS15 15 465 127 50 260
LDS20 20 456 200 75 320
LDS25 25 506 200 75 320
LDS30 30 556 200 75 320
LDS35 35 606 200 75 320
LDS50 50 638 200 100 400
LDS75 75 783 200 100 400
LDS100 100 653 400 200 550
Usage: LDS Series Pharmaceutical Bin is one of the most popular shifting
containers used in the producing flow of solid dosage. It can be used along
with HSD series Bin Blender. Different processing crafts for solid materials
can be operated in the same container. The frequent charging and
discharging of materials are reduced thus avoiding dust and cross
pollution. It’s conformity with GMP requirements.
Features: It’s made of Austenitic stainless steel. All Angles are cambered. There is no
dead angle, con concave‐convex face and no screw on surface. The surface
outside and inside are polished to high quality. Roughness degree inside is
Ra = 0.2 µ m, and outside is Ra = 0.4 µ m. Applying sealing appliance made
of silicon latex on the cover to gain a good airproof quality. Tailor‐made
butterfly valve with no dead angle, no remnant, or appliance against
wrong way operation is easy to dismantle and clean. It’s in conformity with
GMP requirements.
Page 23
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment
Drum-LT
Parameters C ØD H δ
LT50 580 Ø500 460 1
LT100 680 Ø600 570 1
Usage: LT series Drum is one of the popular transferring and shifting
containers used in the producing flow of solid dosage. By using
them along with NT series Pharma Lifters and some other related
equipments, the producing flow and materials transferring system
is optimized, the dust and cross pollution are well controlled. It’s in
conformity with GMP requirements.
Features: It’s made of Austenitic stainless steel. All angles are cambered.
There is no dead angle, no concave‐convex face and no screw, no
remnant on surface. The surface outside and inside is polished to
high quality. It’s in conformity with GMP requirements.
Page 24
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment QY‐5 Moveable&Semi‐Auto Washer for Bin and container
Features:
This equipment is successfully designed on the basis of a
wide research, absorption and digestion of foreign
advanced models. It has a reasonable structure with
stable performances and easy operation; the whole
machine has no dead angle or protruded screws. The
washing process has been greatly optimized with user
friendly operation. QY Series Movable Washers comply
entirely with GMP requirements for medicine production.
Application: The Movable Washer is the main containers washing equipment in
the solid dosage production procedure. One main machine can
wash various bin and container specifications and, consequently it
is considered as the ideal washing equipment in pharmaceutical
industry. It is also widely used in chemical, foodstuff industries, etc
Principle This equipment is composed of pump station, washing and control
systems. When operating, push the used bin or container in the
washing room, take down the bin lid, then put on the lid installed
with rotating washing ball and prepare all the washing processes.
Then, set the washing procedure according to the process
requirements. On confirmation, start the washing procedure
according to the set parameters. When the washing is finished, the
machine stops automatically. Outer surfaces of the bin or container
are washed manually by the operator with a high pressure water
jet. Finally, push the washed bin or container in a drying room for
drying purpose and then store it in a clean room for next
production usage.
Main Technical Specifications QY‐5
Flow rate(T/h) 5
Pressure(Bar) 6.3
B 1300
A 800
H 1300
Page 25
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment QD Series Automatic Washing Station for IBC Bin
Main structural dimensions Main Technical Specifications
C B A
Pump
power Kw
Pump flow rate
T/h
Pump pressure
bar
Total power
Kw
QD400 1600 2500 1350 2.2 5 6.3 7.45
QD600 1800 2700 1400 3 10 6.3 10.75
QD800 1800 2900 1600 3 10 6.3 10.75
QD1000 2100 3000 1700 3 10 6.3 11.1
QD1200 2100 3100 1800 3 10 6.3 11.1
QD1500 2100 3250 1950 5.5 15 6.7 13.6
QD1800 2100 3450 2100 5.5 15 6.7 13.6
QD2000 2100 3600 2300 5.5 15 6.7 13.6
Principle: QD series Automatic Washing Station consists of washing
system, pump system, air handling system, and control
system. To start to work, open the entrance door of the
washing station, push the used containers such as bins,
intermediate bulk containers into the station. When oriented,
close the entrance door, and prepare for cleaning. Assign the
working procedures (hot water, detergent, ionic water) and
parameters at cleaning time, drying time according to craft
requirements. After confirmed, switch on the whole system to
start to work according to procedures and parameters
assigned in advanced. The surfaces outside of the container
are cleaned by the nozzles proportioned on the inner walls of
the station; the surfaces inside of the container are cleaned by
the spray nozzle with telescopic appliance. After cleaned,
drying procedure works automatically Until finishing the
whole work cycle. Open the exit door of the washing station,
pull out the cleaned and dried container and shift it to the
intermediate storage for use of the next work cycle to attain a
safe production.
Usage: QD series Automatic Washing Station is mainly
used in pharmaceutical industry for cleaning the
containers as bins, intermediate bulk containers.
It’s widely used in such areas as pharmaceutical
industry, chemical industry, and foodstuff
industry.
Features:
It’s made of Austenitic stainless steel. Angles are
cambered. There is no dead angle, no
concave/convex face and no screws on the
surface. Applying the PLC control system, all
parameters can be assigned in advanced
according to requirements. Using QD series
Automatic Washing Station to clean LD series
Pharma bins or CD series Intermediate Bulk
containers, has optimized producing flow and
improved working efficiency.
Page 26
402#,Tower‐1,Pearl Mansion Block+3, Rui’an Bund Ave.Rui’an city Zhejiang,China‐325200
[email protected] Tel:0086‐577‐66612826 Fax:0086‐577‐66612827
Solid Pharma Handing Equipment Trolley Mounted CIP/WIP System
Features:
Design is cGMP – Current Good Manufacturing Practices compliance.
All contact parts AISI 316 & non contact parts AISI 304.
CIP (Cleaning‐In‐Place) is a system designed for automatic cleaning by Plain water, Hot Water, detergent, D.M.Water and rinse
solutions without major disassembly and assembly work.
Capacity is designed to accordingly as per customer requirement
The Clean‐In‐Place Systems can be provide reservoirs for detergent and rinse solutions as well as pumping and heating
capabilities for the solutions.
The washing process consists of several cycles in which rinsing material is recycled through the vessels, pumps, valves and
other process equipment in the flow system.
The cleaning can be carried out with automated or manual systems is a reliable process that meets the stringent hygiene
regulations demanded by the food, dairy, beverage, biotechnology and pharmaceutical industries etc.
All the operation processes take place in sealed pipe line, which is easy to operate saving work and meets high sanitary
requirement.
It has advantages as energy‐saving, high work efficiency, perfect cleaning effect, operator safety and easy to operate and
maintain.
Specifications: The CIP/ WIP system is useful for cleaning and washing
at place of Vessel, Tank, Bin, Fluid Bed Equipment, High
shear Mixer, Blender, Auto Coater and IBC Bin.
The Trolley mounted system have inlet connection with
pneumatic operated valve for Plain water, Hot water,
Detergent and D.M.Water and which are connected
with supply pipe in the manufacturing area and near
the machine.
Also high pressure pump is mounted and inter
connected with all above and PLC based controls
system is mounted on the trolley for automatic washing
cycle on time base.
The pump outlet is connected with spray ball of the
machine.
The automatic washing cycle data loaded in the PLC
through HMI and PLC system will wash the machine
accordingly by spray ball.