Solenoid-coupled centrifugal pump vonTaine ® 1010 PP and PVDF Assembly and operating instructions A2924 Insert type and serial no. here: ________________________________________________________________ EN Original operating instructions (2006/42/EC) Part no. 987044 Version: BA vT 017 11/19 EN Please carefully read these operating instructions before use. · Do not discard. The operator shall be liable for any damage caused by installation or operating errors. The latest version of the operating instructions are available on our homepage.
10
Embed
Solenoid-coupled centrifugal pump, vonTaine® 1010 PP and PVDF
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Solenoid-coupled centrifugal pumpvonTaine® 1010 PP and PVDF
Assembly and operating instructions
A2924
Insert type and serial no. here: ________________________________________________________________
EN
Original operating instructions (2006/42/EC)Part no. 987044 Version: BA vT 017 11/19 EN
Please carefully read these operating instructions before use. · Do not discard.The operator shall be liable for any damage caused by installation or operating errors.
The latest version of the operating instructions are available on our homepage.
346 x 163 x 186 346 x 163 x 186 346 x 163 x 186 346 x 163 x 186
Technical data
28
10 Spare partsOrdering address for spare parts and accessories: The currentaddress for ordering spare parts and accessories can be found onthe manufacturer’s homepage www.prominent.com.
10.1 Exploded view drawing
A2928
Fig. 13: Exploded view drawing
10.2 Parts list for vonTaine® 1010 PP/FPMPos. Qty. Part no. Designation Material
101 1 PUMA.14.0180.020 Pump housing without thrust ring Polypropylene
113 1 PUMA.00.0370.020 Housing, 30 mm Aluminium
161 +314.3
1 PUMA.12.0150.086 Housing canister, 30 mm, withoxide ceramic thrust ring
Polypropylene
211 1 PUMA.12.0150.135 Centring shaft, 30 mm Oxide ceramic
230 1 PUMA.14.0180.033 Impeller, Ø 90/5.7 mm Polypropylene