Solar SSR™ Program A better understanding of Solar SSR™ Solar Building Integrated Photovoltaic (BIPV) for Standing Seam AND Exposed Fastener Roof Systems.

Solar SSR™ Program

A better understanding of Solar SSR™

Solar Building Integrated Photovoltaic (BIPV) for

Standing Seam

AND

Exposed Fastener Roof Systems


The Solar SSR System– Total system working together to harvest power– Standing seam applications– Exposed fastener applications– System sizes – System costs– Fabral’s offering


Total System

“On grid” system is shown; “Off grid” systems require battery storage between DC Disconnect and Inverter


The Total System Working together to harvest power.

• Triple-junction technology captures three

wave lengths (red, green/yellow and blue) of sunlight

• Panels are electrically daisy-chained together to maximize output

• Power is converted from DC to AC and is returned to the grid

• Optional Data Acquisition System provides real-time analysis of energy production


The Solar SSR panels are:

• Highly flexible, lightweight and durable

• More efficient at producing electricity than alternative polycrystalline solar technology, especially in shadows and/or low light

• Efficient up to 185°F

• A peel and stick back

The Total System


• No roof penetrations to install

• Eliminates additional structural support requirements

• Maintains serviceability and walkability of the roof

• Roof slopes between 1:12 and 21:12

• Curving is permitted

• Tested to very high hail and wind resistance ratings – extremely durable

• Extremely light weight at ±0.75 psf

The Total System


Standing Seam Applications

• Can be applied to existing metal roofs or new standing seam panels

• Standing Seam panels must be at least 16” seam to seam

• Fabral Enduracote™ and Flurobond™ paint systems are approved

• Solar SSR panels are field installed – can be adhered prior or post to

installing standing seam panels


Standing Seam Panel profile optionsArchitectural/Commercial

16” or 18” Coverage

Thin Seam

16” Coverage

Prestige™

16”, 18” or 20” Coverage

Snap-on-Seam

16” Coverage

Slim Seam

Post Frame/Residential

16” Coverage

1 ½” SSR


Exposed Fastener Applications-A PATENT PENDING APPLICATION -

• BIVP solar thin film laminates can be adhered to hemmed flat sheets that are one foot longer than the solar panels

• Flat sheets are then attached over exposed fastener systems


Solar Panels on Grandrib 3®

Note: panels shown much shorter than actual length to get all details on drawing



PV Wires Under Ridge Cap


Transparent Drawing Showing Wires Under Ridge Cap



Baffling Material Under Flat Plate



System Sizes

• Wide range of power sizes to choose from, depending upon budget and building requirements.

• Standard system sizes: 1.5, 3, 5, 10, 15, 30, 60, 120 and 240 Kw

• The system requires approximately 600 s.f. for 3 kW


Watt = Unit of power = Volt x Amp

Watt Hour = Unit of energy equal to 1 watt of power operating for one hour.

1,000 W (watt) = 1 kW (Kilowatt)

Watts?

5kW system x 1hour = 5 kW-h

Average 3.5-4 hours a day of 100% efficiency

Average day:5kW system x 3.8 hours = 18 kW-h / Day

18kW-h will light 7.5 100w light bulbs for 24 hours


•Commercial buildings: 11.7 – 17.4 kWh per sq.ft. floor area

•Residential buildings: Average house uses 11,000 kWh per year

•5kW system produces approximately 5,000 – 8,000 kWh per year

•1.5kW – Pennsylvania 2,020 kWh / yr

•3kW – Virginia 4,077 kWh / yr

•5kW – Washington 6,389 kWh / yr

•5kW – N. Carolina 6,939 kWh / yr

•5kW – N. Carolina 7,201 kWh / yr

•5kW – Pennsylvania 6,753 kWh / yr

•10kW – Wisconsin 12,155 kWh / yr

•15kw – Wisconsin 18,215 kWh / yr

Typical Power Production Percentages


Other Factors

•Azimuth angle (direction the roof faces, SE, S, SW, etc)

•South or SW is often considered the best

•Sunlight

•Shade

•Snow cover

•Module/Panel Width – 15.5” PV width

•16” SSR most efficient

•18” – 20” SSR = wasted space

Solar SSR


What Fabral Sells

• Fabral sells:• Solar SSR panels• Cable Trays• Cable Tray Covers• Rubber Grommets• S-5! Mini Clamps

• Our customers must obtain the other components themselves

• We provide suggested manufacturers and contacts to call


System Costs

Total estimated system price (less the metal roof):

• 3kw (rated DC, 3.264kw) ~$25,786

• 5kw (rated DC, 5.44kw) ~$41,344


• Metal panels must be clean and smooth with no stiffening ribs, striations or embossing

• Thin-film solar laminate is adhered directly onto the exposed face of the SSR panel in the field or shop in temperatures between 50° and 100°F before roof installation

• Video available online

Installation


Installation

• Fabral specifications clearly outline the scope of work and installation responsibilities

• Fabral manufactures and delivers the entire system to specification

• The system is installed in two steps:

1. The BIPV roofing panels by the trained roofing contractor

2. The electrical system by the electrical subcontractor


Warranty

• The Fabral Solar SSR system comes with a Fabral/EnergyPeak™ 25-year manufacturer’s warranty

25 Years


ROI

• The perfect start

• Can be processed via paper or online at www.fabral.com/ROI.php

• Calculations are available for all power size options

• All current federal rebates, state and local incentives, utility provider incentives, renewable energy credits and depreciation are shown

• ROI well under 10 years is common

• About 7 days for results


Tax Credit Advantages

30% Solar IRS tax credit is available on PV systems- Extended through 2016- Previous cap on residential PV systems has been REMOVED, significantly increasing the tax incentives for residential applications- Many state and local utility rebates exist

PLUS don’t forget - Homeowner Energy Credit of 30% for projects using metal roofing meeting ENERGY STAR® (cool colors) requirements

- Maximum credit is $1500- Does not include installation costs- Must be installed during 2009 or 2010


Drawings & Specifications • Fabral will supply all required AutoCad

drawings, electrical schematics and Masterspec® specifications for both the electrical and roofing sections

• Electrical schematics and specifications should be given to the electrical engineer for review


A better understanding of Solar SSR™

Solar Building Integrated Photovoltaic (BIPV) for

Standing Seam

AND

Exposed Fastener Roof Systems

Solar SSR™ Program A better understanding of Solar SSR™ Solar Building Integrated Photovoltaic (BIPV) for Standing Seam AND Exposed Fastener Roof Systems.

Documents