1288642AProject ReportBased OnAutoCAD A Project Submitted
In Partial Fulfilment of the Requirements
For the Degree of
Bachelor of Technology
In Civil Engineering
By BHART SHARMA
Roll No:-1288642
Under the guidance of Er. GURSHARAN SINGH Head of Civil
Department
DEPARTMENT OF CIVIL ENGINEERING
GLOBAL COLLEGE OF ENGG. & TECH. KAHNPUR KHUI 2015
ACKNOWLEDGMENT
I feel immense pleasure in submitting this training report on
AutoCAD we avail the opportunity in acknowledging to that entire
individual who have directly or indirectly contributed towards the
completion of this report.
We are grateful to respected Er. Gursharan Singh the moral
support, guidance and constructive criticism for evaluation of this
training report.
I am sincere thankful to Mr. Karan Kaundal for their support,
cooperation, motivation and time provided to me during the training
for constant inspiration, presence and blessings.
We cannot find words to carbide may deep sense of gratitude
towards my loving parents. As without their cooperation, inspiring
encouragement and great patience it would not had been possible to
steer the course of this training report to fruition.
PUNJAB TECHNICAL UNIVERSITY GLOBAL COLLEGE OF ENGG. & TECH.
ROPAR (PUNJAB)
CERTIFICATE
This is to certify that BHART SHARMA university registration no.
1288642, has undergone software training at CADD CENTRE UNA (H.P.)
in partial fulfilment of requirement of award of bachelor of
technology degree in Civil engineering. He has successfully
completed his training.
Signature of H.O.D Principal
CONTENTS
S NO. Topics Page
1.Introduction 5
2.Design cycle 6
3.GUI 7
4.Option in menu bar 8
5. Function keys & Filling information 9-10
6.Drawing units 11
7.Co-ordinate system & Commands in AutoCAD12-17
8.Isometric views & Other commands 18-21
9.Layers22
10.Array23-26
11.Hatching26-29
12.Dimensioning29
13.Plotting30
14.Reference and Bibliography31
INTRODUCTION
About AutoCAD:
Auto CAD, a product from Autodesk is a Computer Aided Design
(CAD) program used by just about every Engineering and Design
office in the world. AutoCAD is one of the worlds leading 2D and 3D
CAD design tools.
About CADD Centre:
It is Asias no. 1 CADD centre.There are more than 260 centres in
India.There are 12 international centres.Auto is logo of (U.S.A.)
Auto Desk Company. This company made AutoCAD in December 1982 and
breaks India ltd. Company used this software first time in
1985.First AutoCAD centre was in Chennai.
AutoCAD: Computer Aided Drafting.CAD: Computer Aided
Designing.CAE: Computer Aided Engineering.CAM: Computer Aided
Manufacturing.
Benefits if CADD centre:It provides us study material.It
provides us theory classes.It provides us practical classes.It
provide us internationally valid certificate.Different between
drafting and designing:
Drafting: Without the help of stress-strain, physical and
mechanical properties when we draw any drawing is called
drafting.
Designing: With the help of stress-strain, physical and
mechanical properties when we create any model is known as
designing.
AutoCAD: It is a most popular tool or software used for 2D
drafting. But in case of some small scape industries it is also
used for 3D modelling.
CAD: Computer Aided DraftingIt is used to assist in creation of
new design or modification of existing one with the help of
computer is called as CAD.
Design Cycle
GUI: Graphical User Interface:
It is the graphical interaction between user and machine
UCS: User Co-ordinate System.It represent the position of
point.
Option in menu bar: -
1. File
2. Edit
3. View
4. Insert
5. Format
6. Tool
7. Draw
8. Dimension
9. Modify
10. Parametric
11. Window
12. Help
13. Express
Function Keys:
F1:- Online help
F2:- Command window on and off
F3:- OSNAP on and off
F4:- Table on and off
F5:- Switches among isometric views top, right and left
F6:- Co-ordinates on and off
F7:- Grid on and off
F8:- Ortho on and off
F9:- Snap on and off
F10:- Polar tracking on and off
F11:- Object snap tracking on and off
F12:- Dynamic input on and off
Filling information:-
All drawing are saved as *dwg format.Drawing
templates:-CivilMechanicalAcadacadiso
Measurement system:Empiricalmatric(Inches)(mm)Sheet
size:129420297
NEW: - ctrl+nMenu filenewWrite in command prompt area
OPEN: - ctrl+o Menufileopen Write in command prompt area:-OpenTo
save the page.
SAVE: - ctrl+s Menufilesave Write on command prompt areaIf we
change in project after save it, change will save automatically to
save project.
SAVE AS:-ctrl+shift+s Menufilesave asIf we change in project
after save as, there is no change I our saved project.
CLOSE: - menu window close, to close a project.CLOSE ALL: -
menuwindowclose allTo close all projects in one time.
FTP: - file transfer protocol.
MOVE: - m Move menumodifymoveFirst select move, then select
objects, then press ENTER and select pick point, then move
object.In command prompt areaSelect object:-Specify a base point or
[Displacement]:-Specify second point
Drawing Units: - unMenuformetunit
If we select clockwise angle varies in clockwise
direction.Eastin this option 0 angle starts from east
direction.Otherin this option we can 0 angle at any angle.Insertion
scaleto change units.
COPY: - co
MenuEdit copyWhen in command prompt areaSelect object:Specify
base object or [displacement]:Specify second point or:First select
copy, then select objects, then press ENTER and select pick point,
then paste object.Copy with base point: - Menu File Copy with
base
Paste: Menu file pastePaste as block: - Menu file paste as
blockObject becomes block while pasting.Paste to original: Menu
file paste originalWhile paste in other page, co-ordinates of
object remain same.Paste special: Menu file paste specialTo paste
special file like paint file, word file etc.Type of Co-ordinate
System used in AutoCAD:
There are 3 type of Co-ordinate system used in AutoCAD:
1. Absolute Co-ordinate system2. Relative Rectangular
Co-ordinate system3. Relative Polar Co-ordinate system
COMMANDS IN AUTOCAD:-
LINE: L Line
Menu draw line Toolbar palettes tool palettes draw lineLine
commands allow us to create lines.
Command: _lineSpecify first point: here we give a point with
different methods.Specify next point or {undo}: here we gives next
point of line.Specify next point or {close/undo}: we can give other
point or close.
CO-ORDINATE SYSTEMS
1. Absolute Co-ordinate system: In this system we gives values
in X & Y from origin.Conditions: Origin is always fixed.In case
of closed object starting point and end point is same.
Example: command: _ lineSpecify first point: 0,0Specify next
point or [undo]: -2,0Specify next point or [undo]: -2,2Specify next
point or [close/undo]: 4,2Specify next point or [close/undo]:
4,0Specify next point or [close/undo]: 2,0Specify next point or
[close/undo]: 2,-4Specify next point or [close/undo]: 0,-4Specify
next point or [close/undo]: 0,0 or c
2:- Relative Rectangular Co-ordinate System:-In this system
previous point is considered as 0,0.
Example:-command: - lineSpecify first point:0,0Specify next
point or [undo]:@-3,0Specify next point or [undo]:@0,-6Specify next
point or [close/undo]:@3,0Specify next point or
[close/undo]:@0,-3Specify next point or [close/undo]:@-9,0Specify
next point or [close/undo]:@0,3Specify next point or
[close/undo]:@3,0Specify next point or [close/undo]:@0,6Specify
next point or [close/undo]:@-3,0Specify next point or
[close/undo]:@0,3Specify next point or [close/undo]:@9,0Specify
next point or [close/undo]: c
3:- Relative Polar Co-ordinate System:
In relative polar co-ordinate system we use only distance and
angle.Specify first point: 0,0 or select point anywhere on drawing
area.Specify next point or [undo]:@2