SOFT CLOSE DOOR DEVICE For All Non Soft-Close Hinges 2 PCS
SOFT CLOSE DOOR DEVICEFor All Non Soft-Close Hinges
2 PCS
ARTICLE # 483.01.699HÄFELE AUSTRALIA PTY. LTD 8 MONTEREY RD DANDENONG VIC 3175
730.83.617
MADE IN ITALY
1. Place the adaptor over one “wing” of the mounting plate. Use the front stop for the correct depth positioning.
3. Insert the Smove piston assembly, sliding it in the direction indicated by the arrow.
2. Fix the adaptor in position using woodscrews.
3
Assembly instructions
Place the adapter over one “wing” of the mounting plate. Use the front stop for the correct depth positioning.
Fix the adapter in position using woodscrews.
Insert the Smove piston assembly, sliding it in the direction indicated by the arrow.
It is possible to reduce or increase the decelerating e�ect by turning the screw indicated.
To remove the Smove piston assembly, insert a screwdriver in the indicated slot and prise it o�.
3
Assembly instructions
Place the adapter over one “wing” of the mounting plate. Use the front stop for the correct depth positioning.
Fix the adapter in position using woodscrews.
Insert the Smove piston assembly, sliding it in the direction indicated by the arrow.
It is possible to reduce or increase the decelerating e�ect by turning the screw indicated.
To remove the Smove piston assembly, insert a screwdriver in the indicated slot and prise it o�. 3
Assembly instructions
Place the adapter over one “wing” of the mounting plate. Use the front stop for the correct depth positioning.
Fix the adapter in position using woodscrews.
Insert the Smove piston assembly, sliding it in the direction indicated by the arrow.
It is possible to reduce or increase the decelerating e�ect by turning the screw indicated.
To remove the Smove piston assembly, insert a screwdriver in the indicated slot and prise it o�.
4. It is possible to reduce or increase the decelerating effect by turning the screw as indicated.
5. To remove the piston assembly, insert a screwdriver in the indicated slot and prise it off.
3
Assembly instructions
Place the adapter over one “wing” of the mounting plate. Use the front stop for the correct depth positioning.
Fix the adapter in position using woodscrews.
Insert the Smove piston assembly, sliding it in the direction indicated by the arrow.
It is possible to reduce or increase the decelerating e�ect by turning the screw indicated.
To remove the Smove piston assembly, insert a screwdriver in the indicated slot and prise it o�. 3
Assembly instructions
Place the adapter over one “wing” of the mounting plate. Use the front stop for the correct depth positioning.
Fix the adapter in position using woodscrews.
Insert the Smove piston assembly, sliding it in the direction indicated by the arrow.
It is possible to reduce or increase the decelerating e�ect by turning the screw indicated.
To remove the Smove piston assembly, insert a screwdriver in the indicated slot and prise it o�.
3
Assembly instructions
Place the adapter over one “wing” of the mounting plate. Use the front stop for the correct depth positioning.
Fix the adapter in position using woodscrews.
Insert the Smove piston assembly, sliding it in the direction indicated by the arrow.
It is possible to reduce or increase the decelerating e�ect by turning the screw indicated.
To remove the Smove piston assembly, insert a screwdriver in the indicated slot and prise it o�.