195 Eléments logiques Logic elements Fluide Fluid Température de travail Temperature range max +60°C Pression de travail Working pressure 2 ... 10 bar 0.2 ... 1 MPa Débit nominal a 6 bar Nominal flow rate at 6 bar 100 Nl/min Diamètre nominal Nominal orifice 2.5 mm Air filtré 50µ avec ou sans lubrification 50µ filtered, lubricated or non lubricated air Matériaux Corps: Aluminium anodisé Ressort: Inox Joints: NBR Parties internes: Laiton OT58 Materials Body: Aluminium 11S Springs: Stainless steel Seals: NBR Internal parts: Brass OT58 • Large gamme Wide range • Petites dimensions Small dimensions • Possibilité de montage sur équerre de support Mountable on bracket • Raccord M5 ou raccord instantané pour tube Ø4 M5 threaded ports or push-in fittings for Ø4 tube
8
Embed
Socafluid - Elements Logique Sopra · Voyant pneumatique alimentation tube Ø4 mm Pneumatic indicator, push-in fittings for Ø4 tube Voyantpneumatiquerouge Red pneumatic indicator
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
195
Eléments logiquesLogic elements
FluideFluid
TempératuredetravailTemperature range max+60°C
PressiondetravailWorking pressure
2...10bar0.2...1MPa
Débitnominala6barNominal flow rate at 6 bar 100Nl/min
DiamètrenominalNominal orifice 2.5mm
Airfiltré50µavecousanslubrification50µ filtered, lubricated or non lubricated air
Eléments logiques pour interfaceLogic elements for interface
Pion de référence
Vis de fixation M4
08.296.4 - CELLULE “OU” CRCelluleET,montagesurembaseOR element, for assembling on sub-base
08.297.4 - CELLULE “ET” CRCelluleOU,montagesurembaseAND element, for assembling on sub-base
Pion de référence
Vis de fixation M4
199
Eléments logiques pour interfaceLogic elements for interface
Pion de référence
Vis de fixation M4
08.298.4 - CELLULE “NON” CRCelluleNON,montagesurembaseNOT element, for assembling on sub-base
08.299.4 - CELLULE “OUI” CRCelluleOUI,montagesurembaseYES element, for assembling on sub-base
Pion de référence
Vis de fixation M4
200
Eléments logiques pour interfaceLogic elements for interface
Pion de réference
Vis de fixation M4
08.300.4 - CAPTEUR DE FUITE POSITIF CRCapteurdefuitepositifpourmontagesurembaseSWITCH WITH INHIBITION EXHAUST, for assembling on sub-base
QuandlasortieX(fuite)estbouchéeledistributeurcommutel’entrée1verslasortie2When exhaust is inhibited, the valve switches and air goes out from exit port 2.
Trou de fixation pour vis M4
AQ.015.1EmbasesimplepourlemontagedesélémentslogiqueCRSingle sub-base for assembling of CR logic elements