So you want to make slime - originalstationery.co.ukoriginalstationery.co.uk/wp-content/uploads/2018/02/SlimeKitManual_v3.pdfborax stage and stirring for a minute will make your slime

So you wantto make slime...

...Let’s goo!

THANKS forbuying our SLIME KIT!

We hope youhave lots of fun getting creativewith your slime.You can use this manual as a guide to get started!

Before you get started, a parent or guardian should read the safety information given at the back of this booklet.

What’s in my Slime Kit?

2 MeasuringCups

4 LargeContainers

7 InkColors

1 Packof Clay

5 StirringSticks

Tool KnifeSet

Mixing Bag Glitters - 12 colors

Borax Glue

Softener4 Small

Containers

1 Pack of MiniStyrofoam Balls

Nozzle

2 White Glue

Tips and tricks PageUh oh! My slime isn’t looking quite right. What can I do?!

Don’t worry my slime making pals. We have loads of simple solutions to help you get back on track with your slime.

My color isn’t working right, it’s not mixing or it’s not bright enough.

I want a stretchier slime. How can I do that?

My slime is all wet and nasty. What’s wrong?

I left my slime for a day and now it’s dried up. Can I fix it?

I’ve mixed it but it doesn’t look like slime. How come?

Make sure to add the color BEFORE you add borax water. This will help to make sure the color gets mixed in correctly. If you need it to be brighter, you can always add a little more.

There are loads of ways you can make a stretchier slime. You can add shaving foam (included) or foam lotion (not included) just before the borax stage and stirring for a minute will make your slime extra stretchy.

Sometimes if you get the ratio of glue or water a little bit wrong then your slime can be a little bit wet. There are two simple things you can do to fix this:1. Add a little bit more borax.2. Leave the slime to dry for 2 to 4 hours. This is best if there is too

much water.3. Sometimes the heat of your hands and playing with the slime is all it

needs. Get in there and get messy kneading your slime.

It’s difficult to revive a dead slime. The best thing to do is start again and have loads more fun making new slime. Remember to keep your slime in the containers provided to make sure it lasts a long time.

Sometimes slime needs to be worked with your hands a little bit before it turns into slime. So get stuck in and get messy! Keep trying and following our instructions you’ll be making perfect slime in no time.

S T Y L I N GY O U RS L I M E

A D DS T Y R O F O A M

P I E C E SF O R

AP O P C O R NE F F E C T !

U S ES T R A W S

T OM A K E

C R U N C H YS L I M E !

T H E T O P T I P S

U S ES H A V I N G

F O A MF O R

F L U F F YS L I M E !

U S E P I G M E N T ST O M A K E

A L L K I N D SO F

M A G I C A LC O L O R S !

A D DG L I T T E R

F O RT H A T

E X T R AS P A R K L E !

v

Add a few drops of borax water to 30ml clear glue, and stir for around 30 seconds or until the slime comes together.

If it is not sticking together, add another drop of borax water.

Knead in your hands to take away the last of the wetness.

Borax Water

Borax Water

30mlClear Glue

10mlClear Glue

10mlWhite Glue

30ml Water

Basic Slime 1A slightly stretchy

and firm slime

Basic SlimesThree best slimes to get you started!

Stir 10ml clear glue and 10ml white glue for 30 seconds.

Add 30ml water and mix for 1 minute.

Add a drop of boraxwater and mix for 30 seconds.

Knead.

Basic Slime 2 Wibbly jelly-like slime

that bounces

Don’t add too much borax water

or your slimewill go hard.

Add water to the borax bottle and mix.

Shake it to wake it!

Remember to make sure the borax water is fully mixed!

Shake before every use.

Borax Mixture

v

Alien Egg SlimeMake a bowl of cosmic fun!

10mlClear Glue

SlimeMixture

30ml Water

10ml Borax Water

Ink Color of Choice

v

Basic Slimes (Cont’d.)

Three best slimes to get you started!

Styrofoam

Balls

Mix 10ml clear glue with 30ml water. Stir well and add ink color of choice.

Add 10ml Borax water and mix well until your slime has thickened.

Add a handful of Styrofoam balls to form your alien eggs!

Mix 25ml clear glue and 1 good squirt of shaving foam for 1 minute until creamy.

Add a drop of borax water and mix for 30 seconds.

Knead.

Borax Water

ShavingFoam

25mlClear Glue

Basic Slime 3Super stretchy slime

that is glossy and pretty

Colorful Glitter SlimesCreate the slime of your dreams!

7 Ink Colors

12 Packs of Glitter

You can play with the clay by itself - it feels amazing! If it gets a little dry or you want to add some color, you can use the recipe below:

Mix 20ml warm water with your favourite ink color. Add more ink to make it really bright.

Knead it together with one bag of clay for about 3 to 5 minutes until all the water is gone(this is messy).

Squishy SlimeA crazy slime that feels a little like a marshmallow!

Alternative:

Add 2 to 3 squirts of shaving foam and kneed until all the foam is gone. It is super messy but super fun!

Ink Colorof Choice

Clay20mlWarm Water

Combine different inks to make nearly any color you like. Any slime

can be made into bright amazing colors AND with tons of sparkle!

What can you come up with?

Always add colors or glitters just before adding

borax. All you need to do is make sure they are

stirred in really well.

UsingYour

Slime Kit Safely

And finally, try to avoid the common disease known as “Slime Obsession”!

Full safety information is at the back of this book. Please make sure to read before using this kit.

Children should use this kit under the supervision of adults. The kit is not suitable for children under3 years old.

Keep contents of kit away from eyes and mouth. In case of contact, wash with plenty of water.

PARENTS’ SECTION - READ BEFORE USEALWAYS SUPERVISE YOUR CHILDEN WHEN PLAYING WITH THIS KIT.DO NOT CONSUME ANY INGREDIENTS WITHIN THE KIT. THIS PRODUCT IS NOT FOOD.This kit contains Borax. It’s widely used in the USA as a hardening agent to make slime and with millions of kids making slime using it, there have been no issues reported.

Our kits are designed in the USA and manufactured in China. We have gone to serious lengths to make sure all the content is safe and lab tested.

With that said, some care should be taken with Borax. It has a health hazard level of 2, which puts it in the same category as salt and baking soda. It is classed as an irritant; this is because of its high level of alkalinity. If you have a concern over this, please make sure your child wears hand protection when mixing up their slime. The safety advice on Borax states “wear protective gloves if handling with large quantities.” More details on Borax safety below.

WARNING!! This kit is to be used solely under the strict supervision of adults that have read and fully understand the safety precautions given in the set. Not suitable for children under 36 months old. Use with care and only under adult supervision.

FULL SAFETY INFORMATIONAll ingredients in this kit should always be handled with care and never consumed or eaten. In case of contact with mouth or eyes, wash with water carefully. If in doubt, contact a physician immediately.

The product contains small parts and should be kept away from children younger than 36 months.

PER ITEM SAFETY AND FIRST AID MEASURESPigment – This is NOT considered hazardous under the GHS classification. In case of inhalation, skin contact, eye contact, or swallowing, please follow the standard first aid measures outlined on the next page.

Hardening Agent (Borax) - Serious eye damage or eye irritation, category 2 - causes serious eye irritation.

Prevention: Wash skin thoroughly after handling. Wear eye protection/ face protection when there is the potential for exposure of the eyes to liquid.

IF INHALED: Move person into fresh air. If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.

IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: get medical advice or attention.

IF ON SKIN: No first aid required. However, it is recommended that exposed areas are cleaned with soap and water after use.

IF SWALLOWED: Obtain medical attention. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.

Most important symptoms and effects, both acute and delayed: Signs and symptoms of exposure to this material through breathing, swallowing, and/or passage of the material through the skin may include: stomach or intestinal upset (nausea, vomiting, diarrhoea) irritation (nose, throat, airways), nose bleeding.

Notes to physician: No hazards which require special first aid measures.

Clay: This is NOT considered hazardous under the GHS classification. In case of inhalation, skin contact, eye contact, or swallowing, please follow the standard first aid measures outlined on the next page.

Glue: This is NOT considered hazardous under the GHS classification. In case of inhalation, skin contact, eye contact, or swallowing, please follow the standard first aid measures outlined below.

Glitter: This is NOT considered hazardous under the GHS classification. In case of inhalation, skin contact, eye contact, or swallowing, please follow the standard first aid measures outlined below.

STANDARD FIRST AID MEASURESGeneral advice: No hazards which require special first aid measures.

IF INHALED: Move person into fresh air. If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.

IF IN EYES: Flush with water as a precaution. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: get medical advice/attention.

IF ON SKIN: No first aid required. However, it is recommended that exposed areas are cleaned with soap and water after use.

IF SWALLOWED: Rinse with water. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.

Most important symptoms and effects, both acute and delayed: None known or anticipated symptom.

Notes to physician: No hazards which require special first aid measures.

HANDLING AND STORAGEDo not breathe vapours or mist. Avoid contact with eyes. Do not smoke. Smoking, eating, and drinking should be prohibited in the application area.

DISPOSALDispose of in accordance with all applicable local, state, and federal regulations.

Do not dispose of waste into sewer. Do not contaminate ponds, waterways, or ditches with chemical or used container.

DESIGNED IN THE UK MADE IN CHINA

Reach out to us via our Amazon account bytyping this into your web browser:

support.originalstationery.co.uk

If you love the product and would like to leave a review, head to: Amazon.com/orders

Your feedback is truly appreciated.