SMYTIK(Kunshan) Precision Machinery Co.,Ltd SMYTIK(Kunshan ...

Address: No. 5, Chengbei Road, Yushan Town, Kunshan City, Jiangsu Province Mobile:

+86-19951158023 (Manager Liu)

Tel: +86-512-57923768

Fax: + 86-512-57923768

Email:[email protected]

Web:www.SMYTIKgroup.com

SMYTIK (Kunshan) Precision Machinery Co.,Ltd

SMYTIKgroup.com

SMYTIK(Kunshan) Precision Machinery

ContentsCompany profile 01-02

Product catalog

Double sleeve connector 03-11 Unloading valve 66-68

Nipple 12-16 Pressure reducing valve 69-79

Welded joint (Series A) 17-22 Super high purity diaphragm valve

80-87

Welding joint (B, C, D, E series)

23-27 Ball valve 88-96

VCR joint 28-33 Needle valve 97-101

Hose connection 34-40 Globe valve (wrought steel) 102-103

Hose 41-46 Table valve, instrument valve group

104-110

Hard pipe, coil pipe 47-51 Isolate the release valve set 111-118

Quick connector QC、KS 52-55 Distributor 119-120

Filter joint 56-57 The sampling system 121-123

Medium and high pressure joints, valves

58-60 Sampling steel cylinder 124-126

Check valve 61-63 Cooling container 127-128

Relief valve 64-65

Company profileSMYTIK(Kunshan) Precision Machinery Co., Ltd. SMYTIK is an internationally renowned machinery

brand from the United Kingdom. It was established in Jiangsu, China in 2017. The company sets

research and development, design, production and sales as one, the main instrument valve

products, including stainless steel card sleeve joints, pipe joints, hydraulic joints, quick

joints, hose joints; Instrument valves, valve sets, pressure reducing valves; Socket welding,

butt-welding pipe fittings; Seamless, stitched stainless steel pipe; All kinds of hoses and metal,

Teflon hoses, etc. Widely used in petroleum, chemical, steel, paper, medicine, electronics,

semiconductor, shipbuilding and other industries.

Since its establishment, based on the values, the company has been committed to improving the

system, improving the supporting ability and innovation ability of the project, and has passed the

ISO9001, ISO14001, ISO45001 management certification system. The product quality has been

recognized by domestic and foreign customers, exported to the United States, Europe, Japan and so

on. The company always adheres to the "product quality" as the basis; "Customer-oriented" as the

core; "Pursuit of excellence" as the concept. To provide customers with quality products,

professional technical support and satisfactory after-sales service.

01 02

n Double sleeve joint provides all metal seal, no elastic sealing element, sealing more reliable

n The SMYTIK double sleeve joint is stronger than any applicable pipe

n Meet the industry standard, suitable for all kinds of standard pipes

n The hardness of stainless steel tube is recommended to be less than 85HRB

n Sizes from 1/16 to 2 in, 2 mm to 50 mm

n SMYTIK double sleeve joint materials are stainless steel, brass, carbon steel, aluminum, nickel-

copper alloy, Hastelloy alloy, Inconel alloy

n SMYTIK special treatment of the rear sleeve to ensure the safety and reliability of the seal

n Thread internal silver plating to prevent occlusal, multiple disassembly and assembly

n Reliable seal can be used in high pressure, vacuum and vibration applications

Double sleeve connector

n Hydraulic seal test (1.5 times working pressure) : no leakage

n Repeated installation test (10 times) : no leakage

n Maximum static pressure test (4 times working pressure) : no leakage

n Vacuum test (1 × 10-4mbar or greater) : leakage rate less than 1 ×10-8mbarl/s n Gas static pressure test (1.5 working pressure nitrogen) : no bubbles

n Hydraulic vibration and pulse test (pulse frequency 0.5 Hz to 1.7 Hz, vibration frequency 23 Hz

to 47 Hz) : no leakage thermal cycle test (- 25℃ to +80℃

n Alternating temperature) : no leakage

n Pneumatic pressure vibration test (frequency 45 Hz cycle 20 × 106) : no failure n Fire resistance test (according to BS ISO 19921) : no leakage

n Corrosion resistance test (salt spray test 168 h) : no rust spot

n Deep water test (equivalent to 3,048 m of sea water) : no leakage

Performance and Testing

04

Product introduction, performance and test

Balance thread seal form

Standard and pressure class

The product selection

Encoding rules

04

05

06

07-10

11



S M Y T I K (Kunshan) Precision Machinery Co.,Ltd03

Material Bar Forgings

316 Stainless steelA S T M A 2 7 6

A S M E SA479, EN1.4401

A S T M A 2 7 6

A S M E SA479, EN1.4401

Alloy 20 A S T M B 4 7 3 A S T M B 4 6 2

Alloy 400/R-405 A S T M B164, A S M E S B 1 6 4 A S T M B564, A S M E S B 5 6 4

Alloy 600 A S T M B166, A S M E S B 1 6 6 A S T M B564, A S M E S B 5 6 4

Alloy 625 A S T M B 4 4 6 A S T M B564, A S M E S B 5 6 4

Alloy 825 A S T M B 4 2 5 A S T M B564, A S M E S B 5 6 4

AlloyC-276 A S T M B 5 7 4 A S T M B 5 6 4

Aluminum A S T M B 2 1 1 A S T M B 2 4 7

Brass A S T M B16, A S T M B 4 5 3 A S T M B 2 8 3

Carbon steel A S T M A 1 0 8 -

Dual phase steel 2507 A S T M A 4 7 9 A S T M A 1 8 2

Titanium（grade4） A S T M B 3 4 8 A S T M B 3 8 1

P F A - A S T M D3307 TypeⅠ

P T F E A S T M D 1 7 1 0 A S T M D 3 2 9 4

Material standard

N P T

Thread

sizes

316 Stainless steel and carbon steel brass

Pin Female thread Pin Female thread

psig bar psig bar psig bar psig bar

1/16 11000 760 6700 460 5500 380 3300 230

1/8 11000 690 6500 440 5000 340 3200 220

1/4 8000 550 6600 450 4000 270 3300 220

3/8 7800 540 5300 360 3900 270 2600 180

1/2 7700 530 4900 330 3800 260 2400 160

3/4 7300 500 4600 320 3600 250 2300 160

1 5300 370 4400 300 2600 180 2200 150

1 1/4 6000 410 5000 350 3000 200 2500 170

1 1/2 5000 340 4600 310 2500 170 2300 150

2 3900 270 3900 270 1900 130 1900 130

N P T Thread pressure class

S A E / M S Thread pressure class

n The pressure rating is based on SAE J196/3 room temperature

n For joints with O-rings, the pressure is lower

Sealing form of parallel thread

GO

GS

GE

GP2

GP1


S M Y T I K (Kunshan) Precision Machinery Co.,Ltd05 06

SAE/MSThread sizes

316 Stainless steel and carbon steelSAE/MS

Thread sizes

316 Stainless steel and carbon steel

The positioning Can locate The positioning Can locate

psig bar psig bar psig bar psig bar

5/16-24

4568 315

4568

3626

315

250

1"1/16-12 3626 250 2900 200

7/16-20 1"3/16-122900 200 2320 160

2001/2/20 1"5/16-12

9/16-18 1"5/8-122320 160 1813 125

2003/4/16 1"7/8-12

2007/8/14 3626 250 3626 200 2"1/2-12 1813 125 1450 100


Male thread joint of sleeve

Double clamp female thread joint

Double gimlet straight connector

Male thread elbow of sleeve

S 6 - M C - 0 3 - M N 0 1

S 6 - B M C - 6 - M N 0 1

S 6 - T M C - 0 3 - M N 0 1

S 6 - F C - 8 - F N 0 3

S 6 - B F C - 6 - F N 0 3

S 6 - U - 0 2

S 6 - B U - 0 2

S 6 - L M - 8 - M R 0 2

Double clamp sleeve male thread through plate joint

Boring joint of sleevewith male thread

Straight through plate joint with double clamp sleeve

Double clamp sleeve female thread through plate joint


The product n a m e Examples of coding selection Appearance of the form Section view

Elbow of female thread of clamping sleeve

The card sets of elbow

Card sleeve cap

Card sets of plug

Card sleeve - card sleeve

The short answer

Clamp bushing - male thread

S6-LP-03-UN7/16"-20

S 6 - L F - 0 2 - F N 0 2

S 6 - L U - 0 2

S 6 - C - 0 2

S 6 - P - 0 8

S 6 - P C - 0 4

Adjustable elbow for female thread position of clamping sleeve

The product n a m e Appearance of the form Section view

S 6 - O D O T - 0 2 - O T 0 3

S 6 - O T M - O T 0 3 -M N 0 1


Examples of coding selection

Double sleeve connector Double sleeve connector



Clamp bushing - female thread

Holder - flange

Jacket welded joint

Jacket welding elbow

Double sleeve insulated joint

Front card - rear card

Card sleeve nut

S 6 - L B W - 0 4 - T B 0 6

S 6 - D F - 6

S 6 - N - 0 3

The product name Examples of coding selection Appearance of the form Section view


S 6 - T M T - 8 - M R 0 1

S 6 - T T M - 8 - M R 0 2

S 6 - T F T - 0 2 - F R 0 2

S 6 - T T F - 0 2 - F R 0 2

S 6 - T U - 0 3

S 6 - U C R - 0 3

Main male thread collar tee

Branch pipe male thread sleeve tee

Main female thread collar tee

Branch pipe female thread collar tee

Card sleeve tee

Card sets of cross

The position of main male thread can be adjusted

The position of the male thread of the branch pipe can be adjusted


S 6 - O T F - O T 1 0 -F N 0 3

S 6 - F A - 0 4 -F L 0 8 R F 1 5 0 #

S 6 - F F - 0 4 S 6 -

B F - 0 4

S 6 - O D B W - 8 - P B 0 1 S6-TPT-02-M8 * 0.5

S6-TTP-04-M12 *1.5


Double sleeve connector Double sleeve connector

Body material

Encoding rules

S 6 M C N04 03

P 3和P4端口

The P1, P2, P3, and P4 ports should be described according to the following rules:n Sleeve -Tube -NPT thread -ISO taper thread -ISO parallel thread -

SAE/MS straight thread -37 flares -Pipe butt welding - Inch Tube butt welding - Other

n The joint types are the same and are described in order of joint size from large to small

n If all connectors are of the same type and size, just describe the P1 port

n Please consult SMYTIK after service for flange standard

P 4

P 3

P 2P 1

Product introduction, standard and working temperature


Encoding rules

13

14-15

16

Nipple


Joint type P1/P3/P4 port type P1/P3/P4 port size P2 Port Type P2 Port Size


S6 316Stainless steel MC Threaded joint with double clamp sleeve The double card set 005 1/6" MN NPT male 005 1/6"

S6L 316LStainless steel BMC Double clamp sleeve male thread through plate joint OT Card casing 01 1/8" FN NPT female thread 01 1/8"

S4 304Stainless steel TMC Boring joint of sleeve with male thread 015 3/16" MR PT pin 015 3/16"

S1 321Stainless steel FC Double clamp female thread joint 02 1/4" FR PT female thread 02 1/4"

A20 Alloy20 BFC Double clamp sleeve female thread through plate joint 025 5/16" GQ BSPP thread O seal 025 5/16"

M Alloy400 U Double gimlet straight connector 03 3/8" GE BSPP thread E seal 03 3/8"

INC Alloy600 BU Straight through plate joint with double clamp sleeve 04 1/2" GS BSPP thread S seal 04 1/2"

A65 Alloy625 LM Double clamp male thread elbow 05 5/8" GP1 BSPP thread P1 seal 05 5/8"

HC AlloyC276 LPAdjustable elbow for position of female thread of double clamp

sleeve 06 3/4" GP2 BSPP thread type P2 seal 06 3/4"

AL Aluminum LF Double clamp female thread elbow 07 7/8" UN UN thread 07 7/8"

B Brass LU Double sleeve elbow 08 1" M Metric thread 08 1"

CS Carbon steel C Double clamp sleeve cap L11 1-1/8" OT Card casing L11 1-1/8"

D5 2205 P Double sleeve plug L12 1-1/4" TB TUBE pipe butt welding L12 1-1/4"

D7 2507 ODOT Double sleeve * card sleeve L14 1-1/2" TS TUBE pipe welding L14 1-1/2"

T PTFE PC The short answer L2 2" PB PIPE PIPE butt welding L2 2"

TI Titanium OTM Male thread of clamp sleeve 2-50Metric size:

2mm-50mmPS PIPE PIPE welding 2-50

Metric size: 2mm-50mm

PA Nylon OTF Clamp sleeve * female thread FL The flangeOther expressions: M

tooth: M5*0.8,UN tooth: 5/16"-24

A PFA FA Double sleeve flange

ODBW Double sleeve welded joint

LBW Double sleeve welded elbow

DF Double sleeve insulated joint

FF*BF Front card * rear card

N Card sleeve nut

TMT Main male thread collar tee

TTM Branch pipe male thread sleeve tee

TPT The position of main male thread can be adjusted

TTP The position of the male thread of the branch pipe can be adjusted

TFT Main female thread collar tee

TTF Branch pipe female thread collar tee

TU Card sleeve tee

UCR Double card sleeve four-way

n Size from 1/16 to 2 in, 6 mm to 30 mm SMYTIK thread joint material

n Includes stainless steel, Alloy400/R-405, brass, carbon steel, etc

n Threads include NPT, ISO/BSP, SAE and ISO metric threads

n Precise machined, burr-free threads ensure an effective seal and prevent bite

Nipple

Material standard

The material Working temperature°F（°C）

316 Stainless steel -65(-53) to 1000(537)

Brass -20(-28 )to 400(204)

Carbon steel -65(-53) to 375(190)

B S g a s k e t（FK M） 5(-15) to 400(204)

BG、BP gasket（copper） 5(-15) to 400(204)

S A E O r i n g（FK M） 5(-15) to 400(204)

Operating temperature range

Thread plug

Double outer thread joint

Double internal thread coupling

Big female and small female thread joint

Large Yin and small Yang thread joint

Male thread elbow

Female thread elbow

Yin and Yang thread elbow

Male thread tee

S 6 - P T H - M R 0 3

S 6 - H N - M R 0 1

S 6 - H C G - F R 0 6

S 6 - R B - M R 0 4 - F R 0 2

S 6 - R A - F N 0 3 - M N 0 2

S 6 - L M E - M R 0 1

S 6 - L F E - F R 0 1

S 6 - L S E - F R 0 4 -M R 0 1

S 6 - M T - M R 0 1


The product name Examples of coding selectionAppearance of the form Section view


316Stainless steel A S T M A 2 7 6 A S M E SA479, EN1.4401 A S M E SA182, EN1.4401

Alloy20 A S T M B 4 7 3 A S T M B 4 6 2

Alloy400/R-405 A S T M B164, A S M E S B 1 6 4 A S T M B564, A S M E S B 5 6 4

Alloy600 A S T M B166, A S M E S B 1 6 6 A S T M B564, A S M E S B 5 6 4

Alloy625 A S T M B 4 4 6 A S T M B564, A S M E S B 5 6 4

Alloy825 A S T M B 4 2 5 A S T M B564, A S M E S B 5 6 4

AlloyC-276 A S T M B 5 7 4 A S T M B 5 6 4

Aluminum A S T M B 2 1 1 A S T M B 2 4 7

Brass A S T M B16, A S T M A S T M B 2 8 3

Carbon steel B 4 5 3 A S T M A 1 0 8 -


Nipple Nipple

S 6 - P H - A N 0 4 - M N 0 4

S 6 - P H L - A N 0 4 -M N 0 2

S 6 - V P F - M N 0 6

S 6 - P U P - M 2 0 * 2 -M N 0 2

Material ontology Joint type

Encoding rules

S 6 T R 02

The P1, P2, P3, and P4 ports should be described according to the following rules:n NPT Thread -ISO Taper Thread -ISO Parallel Thread -SAE/MS Strait Thread -

Metric Thread - Othersn When describing the type, the male thread is named after the female thread,

except for the type "RB"n The joint types are the same and are described in order of joint size from large

to smalln If all connectors are of the same type and size, just describe the P1 port

P 4

P 3

P 2P 1


Main male thread tee

Branch pipe male thread tee

Female thread tee

Female thread four through

Flared male thread joint

Flared male thread elbow

Discharge protector

Male and female threaded couplings

S 6 - S T - F R 0 1 - M R 0 1

S 6 - B T - F R 0 2 - M R 0 1

S 6 - T - F R 0 1

S 6 - F C R - F R 0 4



Nipple Nipple

S6 316Stainless steel PTH Thread plug MN NPT male 005 1/6"

S6L 316LStainless steel HN Double outer thread joint FN NPT female thread 01 1/8"

S4 304Stainless steel HCG Double internal thread coupling MR PT pin 015 3/16"

S1 321Stainless steel RBBig female and small female thread

joint FR PT female thread 02 1/4"

A20 Alloy20 RALarge Yin and small Yang thread

joint GO BSPP thread O seal 025 5/16"

M Alloy400 LME Male thread elbow GE BSPP thread E seal 03 3/8"

INC Alloy600 LFE Female thread elbow GS BSPP thread S seal 04 1/2"

A65 Alloy625 LSE Yin and Yang thread elbow GP1 BSPP thread P1 seal 05 5/8"

HC AlloyC276 MT Male thread tee GP2 BSPP thread type P2 seal 06 3/4"

B Brass ST Side male thread tee UN UN thread 07 7/8"

CS Carbon steel BT Branch pipe male thread tee M Metric thread 08 1"

D5 2205 T Female thread tee FAN Flared female thread L11 1-1/8"

D7 2507 FCR Female thread four through MAN Flared male thread L12 1-1/4"

PH Flared male thread joint L14 1-1/2"

PHL Flared male thread elbow L2 2"

VPF Discharge protectorOther

expressions: M tooth: M5*0.8,UN tooth: 5/16"-24

PUP Male and female threaded couplings

P1/P2/P3/P4 port type P1/P2/P3/P4 port size

n Sizes from 1/8 to 2 in., 6 mm to 38 mm

n SMYTIK welding joint standard material is 316 stainless steel, other materials can be provided on

demand

n Provide socket welding and butt welding

n Operating temperature up to 538℃ (1000 F), suitable for harsh and high temperature conditions

n Elbow channel is connected with circular arc to ensure smooth flow of fluid.

n SMYTIK welded joints are made of 316/316L stainless steel, Bar is ASTM A479/ASME SA479 and ASTM

A276

n SMYTIK welded joints are made of 316/316L stainless steel and forged materials are ASTM A182/ASME

SA182 and ASTM A314

Welding joint -A



Tube butt welding - male thread joint

Tube butt-welded female thread joint

Tube butt welding

into straight through

joint

S 6 - W M - T B 0 4 - M N 0 4

S 6 - W F - T B 1 4 - F N 0 4

S 6 - W U - T B 2 0 - T B 1 4

Welding joint A series

Encoding rules

Welding joint B, C, D, E series

Encoding rules

18-21

22

23-26

27

Welding joint series



Tube insert welding elbow

Tube insert welding tee

Tube insert welding four-way



Butt-welding elbow of Tube

Tube butt welding tee

Tube butt welding four-way

Tube plug welding - male thread elbow

Tube plug welding - female thread elbow

Tube plug welding - male thread joint

Tube insert welding-female thread joint

Straight welded Tube

joint

Tube insert welding

into straight through

joint

S 6 - W L U - T B 0 4

S 6 - W T - T B 1 4

S 6 - W C - T B 1 2

S 6 - W M - T S 0 4 - M N 0 4

S 6 - W F - T S 1 4 - F N 0 2

S 6 - W L M - T S 0 3 - M R 0 3

S 6 - W L F - T S 0 4 - F N 0 4

S 6 - W U - T S 0 4

S 6 - W U - T S 0 6 - T S 0 4

S 6 - W L U - T S 1 4

S 6 - W T - T S 1 4

S 6 - W C - T S 0 4

S 6 - W M - P B 0 3 - M N 0 3

S 6 - W F - P B 0 4 - F N 0 4



Butt-welded Pipe - female threaded joint


Butt-welded Pipe joint with male thread

Welding joint series Welding joint series

The P1, P2, P3, and P4 ports should be described according to the following rules:n When describing the type, name PIPE threaded joints after butt-

welded joints (except "PUW" and "MUW").n Pipe butt welding - Tube butt welding - Pipe insert welding - Tube

insert welding - Othern If the joint type is the same, it is written according to the joint

sizen If all connectors are of the same type and size, just describe the

P1 port

P 4

P 3

P 2P 1

Body material Joint typeThe P2 / P3 / P4

port

Encoding rules

P1端口尺寸

S 6 W M T B 04 M N 0 4

Female thread - welding loose joint

Male thread - welding loose joint

Tube butt welding - TUBE butt welding straight joint

Pipe butt welding - Tube butt welding straight joint

Pipe butt welding - male thread joint

S 6 - W A - T B 0 4 - T S 0 3

S 6 - W A - P B 0 4 - T S 0 4

S 6 - P U W - M 2 0 * 2 -T B 1 4

S 6 - M U W - M N 0 4 -T B 14






S6 316Stainless steel WM Welding - male thread joint TB TUBE pipe butt welding 005 1/6" The identification method is the same as P1

S6L316L Stainless

steelWF Weld-female threaded joint TS TUBE pipe welding 01 1/8"

S4 304Stainless steel WUWelding change straight through

jointPB PIPE PIPE butt welding 015 3/16"

S4L304L Stainless

steelWLU The welding elbow PS PIPE PIPE welding 02 1/4"

S1 321Stainless steel WT Welding tee MN NPT male 025 5/16"

A20 Alloy20 WC Welding cross FN NPT female thread 03 3/8"

M Alloy400 WLM Welding - male thread elbow MR PT pin 04 1/2"

INC Alloy600 WLF Weld-female thread elbow FR PT female thread 05 5/8"

A65 Alloy625 WA Welding change-over joint GO BSPP thread O seal 06 3/4"

HC AlloyC276 PUWFemale thread - welding loose

jointGE BSPP thread E seal 07 7/8"

B Brass MUW Male thread - welding loose joint GS BSPP thread S seal 08 1"

CS Carbon steel GP1 BSPP thread P1 seal L11 1-1/8"

D5 2205 GP2BSPP thread type P2

sealL12 1-1/4"

D7 2507 UN UN thread L14 1-1/2"

M Metric thread L2 2"

FAN Flared female thread 2-50 Metric size: 2mm-50mm

MAN Flared male thread Other expressions: M tooth: M5*0.8,UN

tooth: 5/16"-24 Fran: 1 "RF150 #

P1 Port Type P1 Port Size

Pipe insert welding-female thread joint

Straight joint for Pipe insert welding

S6-WM-PS03-MN03

S6-WF-PS04-FN04

S6-WU-PS04

n Dimensions range from 1/8" to 1/2", 6 mm to 12 mm

n 316L VAR and 316L Vim/VAR stainless steel are available

n Butt-welded connections ensure no abrupt changes in the system

n Elbow channel is connected with circular arc to ensure smooth flow of fluid

n Operating temperature up to 454℃ (850℉)

n Standard runner surface finish up to Ra 0.25μm (10μin.)

Welding joint -B

Tube butt welding into straight through joint

S 6 - W U 1 - T B 0 4 - T B 0 2

S 6 - W L 1 - T B 1 0

S 6 - W L 1 - T B 1 2 - T B 6

S 6 - W V 1 - T B 0 2

S 6 - W T 1 - T B 1 2

S 6 - W T 1 - T B 0 4 -T B 0 4 - T B 0 2

S 6 - W C 1 - T B 0 3

S 6 - W U 2 - T B 0 4 - T B 0 2

S 6 - W L 2 - T B 1 0

S 6 - W T 2 - T B 1 0

S 6 - W T 2 - T B 0 4 -T B 0 4 - T B 0 2

S 6 - W C 2 - T B 0 4


Tube butt-welded reducer elbow

Tube butt welding Angle tee


Tube butt welding reduced diameter tee




n Extended Tube design

n Except for the through-through structure, all other structural joints are machined from

Forgings blank

n Size range: 1/4 "to 1", 6mm to 18mm

Welding jo int -C

Tube butt welding into straight through joint









n Comply with ASME B16.9 and GB/T 12459

n Size range: NPS 1/2" to 2"

n Standard material is 316 stainless steel, other materials can be provided on demand

n Butt-welding connection to ensure that the system without abrupt

n Arc connection of bend joint channel ensures smooth flow of fluid

n Operating temperature up to 454℃ (850℉)

Welding jo int -E

Get straight through

90° long radius elbow

45 °elbow

Equal tee

Branch pipe reducer tee



n Size range: 1/4" to 2"

n 316 l stainless steel

n Butt-welded connections ensure no abrupt changes in the system

n Elbow channel is connected with circular arc to ensure smooth flow of fluid

n Operating temperature up to 454℃(850℉)


Welding joint -D

Concentric reducer butt-welded straight Tube joint


S 6 - W U 3 - T B 0 3 - T B 0 2

S 6 - W L 3 - T B 0 2

S 6 - W T 3 - T B 0 2

S 6 - W T 3 - T B 0 3 -T B 0 3 - T B 0 2

S 6 - C W 3 - T B 0 2

S 6 - W U 4 - P B 0 8 -P B 0 4

S 6 - W L 4 - P B 0 4

S 6 - W V 4 - P B 0 4

S 6 - W T 4 - P B 0 8

S 6 - W T 4 - T B 0 8 -T B 0 8 - T B 0 4



Butt-welded Tube caps





Body materialThe P2 / P3 / P4

port

Encoding rules

S 6 W U 1 T B 04 T B 0 2

■ The joint types are the same and are described in order of joint size from large to small

■ If all connectors are of the same type and size, just describe the P1 port

P 4

The P1, P2, P3, and P4 ports should be described according to the following rules:

P 3

P 2P 1

Product introduction, standard and working temperature


Encoding rules

29

30-32

33

VCR joint



S6 316 Stainless steel WUTube butt welding into straight through joint

01 B series TBTUBE PIPE butt

welding005 1/6" The

identification method is the same as P1S6L 316L Stainless steel WL

Butt-welding elbow of TUBE

02 C series PBPIPE PIPE butt

welding01 1/8"

6LV316L VAR Stainless

steelWT Tube butt welding tee 03 D series 015 3/16"

6LW 316L VIM / VAR Stainless steel

WVTube butt-welded 45°

elbow04 E series 02 1/4"

B series only supply 316/304 material

WCTube butt welding

four-way025 5/16"

CW Butt cap 03 3/8"

04 1/2"

05 5/8"

06 3/4"

07 7/8"

08 1"

L11 1-1/8"

L12 1-1/4"

L14 1-1/2"

L2 2"

2-50Metric

size: 2mm-50mm

Joint type Joint series P1 Port Type P1 Port Size

n Size range: 1/16" to 1", 6 mm to 25 mm

n 316, 316L and 316L VAR stainless steel materials are available

n Metal-to-metal seals ensure zero leakage from high vacuum to high pressure


n Nut threads are silver-plated to effectively reduce friction with body threads

VCR jo int VCR

接头

Material standard Temperature range


Short Tube butt-welded nozzles

Long Tube butt-welded nozzles

S 6 - V G - V C R 0 4

- T B 0 4 - S - V G T 1

S 6 - V G - V C R 0 4

- T B 0 4 - L - V G T 1



Weld outside the Tube

Tube in welded pipe

Clamp pipe pipe

Blind to take over

Welding nozzles for the sleeve

Welding nozzles through

VCR nut

Short Tube with welded Tube

NPT male thread welding nozzles

NPT female thread welding nozzle

S 6 - V G - V C R 0 4

- T S 0 3 - S - V G T 1

S 6 - V G - V C R 0 4

- O T 0 3 - V G T 1

S 6 - V G - V C R 0 4

- B - V G T 1

S 6 - V W G - V C R 0 4

- M N 0 3 - V G T 1

S 6 - V W G - V C R 0 4

- F N 0 3 - V G T 1

S 6 - V W G - V C R 0 4

- O D 0 3 - V G T 1

S 6 - V W G - V C R 0 4

- V G T 1

S 6 - V N - V C R 0 4

- V G T 1

S 6 - V G - V C R 0 4

- T B 0 4 - V G T 1

S 6 - V G - V C R 0 4

- T S 0 3 - V G T 1


VCR

接头


VCR joint VCR joint

Test ports on two parts for easy leak testing

Side-load support gaskets with minimal disassembly clearance for easy installation

The average roughness of standard surface finishes on the nozzle and joint body is 10μin.(0.25μm)Ra

No "active leak" zone

Precise manufacture of gaskets for the highest performance The internal thread is silvered to prevent wear and to

ensure the consistency of assembly and construction


Joint material

316 Stainless steel

ASTM A276 ASME SA479

ASTM A182 ASME SA182

316L Stainless steel

316L VAR Stainless steel

Gasket materials

316 Stainless steel ASTM A240, A167

Copper ASTM B152

Nickel ASTM B162

Product Material Operating temperature range

Joint

316Stainless steel

-425°F to 1000℉ （-254℃ to 538℃）

316LStainless steel

316L VAR Stainless steel

316Stainless steel

GasketCopper -425°F to 400℉ （-269℃to204℃）

Nickel -325°F to 600℉ （-198℃to315℃）


Male thread nut

Ody of male thread

Female thread body

Card sleeve joint

Piercing board card sleeve joint

Male thread joint through plate

Through ontology

Straight through plate connector

Female thread body

S 6 - V C F - V C R 0 4

- F N 0 4 - V G T 1

S 6 - V U - V C R 0 4

- O D 0 3 - V G T 1

S 6 - V U B - V C R 0 4

- O D 0 3 - V G T 1

S 6 - V B W - V C R 0 2

- T B 0 2 - V G T 1

S 6 - V C M B - V C R 0 4

- M N 0 2 - V G T 1

S 6 - V U - V C R 0 4 -V G T 1

S 6 - V B U - V C R 0 4 -V G T 1

S 6 - V B C - V C R 0 4 -V G T 1

S 6 - W M N - V C R 0 4 -V G T 1


Butt-welded joint of Tube Tube through plate

S 6 - V C M - V C R 0 4

- M N 0 4 - V G T 1


Taper body of female thread

Big Yin small Yang body

Big Yang small Yin body

Elbow body of male thread

Bend the ontology

Tee ontology

Four-way ontology

Plug

Pipe cap

Gasket

S 6 - V R B - V C R 0 4

- V C R 0 2 - V G T 1

S 6 - V L U - V C R 0 4

- M N 0 4 - V G T 1

S 6 - V L U

- V C R 0 4 - V G T 1

S 6 - V T

- V C R 0 4 - V G T 1

S 6 - V U C R

- V C R 0 3 - V G T 1

S 6 - V P

- V C R 0 2 - V G T 1

S 6 - V C

- V C R 0 2 - V G T 1

S 6 - V G T 1 - V C R 0 4

S 6 - V R U - V C R 0 4

- V C R 0 2 - V G T 1

S 6 - V R A - V C R 0 4

- V C R 0 2 - V G T 1



VCR joint VCR joint

Body material Joint type

Encoding rules

S 6 V G N 04 V G T 1V C R

■ The joint types are the same and are described in order of joint size from large to small

■ If all connectors are of the same type and size, just describe the P1 port

P 4

The P1, P2, P3, and P4 ports should be described according to the following rules：

P 3

P 2P 1

Hose connection


VCR joint

S6316 stainless

steelVG To take over

VCR Metal gasket end face sealing joint

01 1/8" VCRMetal gasket end face

sealing joint005 1/6"

VGT1

Flat gasket

S6L316L stainless

steelVWG Welding to take over 02 1/4" MN NPT male 01 1/8"

VGT2

Scratched gasket

6LV 316L VAR stainless steel

VN Nut 03 3/8" FN NPT female thread 015 3/16"

VMN Male thread nut 04 1/2" MR PT pin 02 1/4"

VCM Body of male thread 06 3/4" FR PT female thread 025 5/16"

VCF Female thread body 08 1" GO BSPP thread O seal 03 3/8"

VU Through ontology GE BSPP thread E seal 04 1/2"

VUBWear board card sleeve

bodyGS BSPP thread S seal 05 5/8"

VCMB

Male thread body of plate

GP1 BSPP thread P1 seal 06 3/4"

VBY Blind ontology GP2BSPP thread type P2

seal07 7/8"

VBUThrough the plate through the body

UN UN thread 08 1"

VBWButt-welding body of TUBE through plate

M Metric thread L11 1-1/8"

VBC Female thread body OT Card casing L12 1-1/4"

VCWTube insert welding

bodyTB

TUBE pipe butt welding

L14 1-1/2"

VRUTaper body of female

threadTS TUBE pipe welding L2 2"

VRA Big Yin small Yang body PBPIPE PIPE butt

welding2-50 Metric

size: 2mm-50mmVRB Big Yang small Yin body PS PIPE PIPE welding

VLMElbow body of male

thread Others: M tooth:

M5*0.8,UN tooth: 5/16"-24 Fran: 1 "RF150 #

VLU Bend the ontology

VT Tee ontology

VUCR

Four-way ontology

VP Plug

VC Pipe cap

VGT1

Flat gasket

VGT2

Scratched gasket

P1 Port Type P1 Port Size P2/P3/P4 port types P2/P3/P4 port size Gasket type

04

35 Product Introduction

36 Teflon connector

37 Panda fittings

38 Sand-filled pipe fittings

39 Multi-purpose push-in hose

40 Encoding rules

■ P T F E Lining, stainless steel braided

■ Metal flexes ■ Multi-purpose push-in connection

■ Thermal plastic ■ The conductive lining

Hose connection

Check Make inspection plan according to system application and replacement history

Recommended Is not recommended

Electrostatic discharge

Fluid flowing through the hose produces static electricity.

Choose a hose with sufficient electrical conductivity to

ensure that the static charge is transmitted to the earth and

the static electricity dissipates. If static electricity is

likely to be generated in an application, select a static

dissipating hose and properly ground it.

Vibration

The vibration of the system should be considered when

selecting hoses. Metal hoses may not be suitable for use in

systems with continuous or severe vibration.

The length of theHose movement, system pressure and thermal expansion must be

considered when determining hose length. Installation of hose

length is not sufficient to meet the needs of the above

factors will shorten the hose life.

Minimum bending radius

Minimum bend radius requirements for hoses must be observed. Too small bending radius of installed hoses may cause hose kink and shorten hose life.

Hose strainBending parts too close to the hose/connector connection may cause the hose to break or leak.

Sports to absorbDisperse movement through sufficient hose length and prevent bending less than the minimum hose bending radius.

The machine tool tolerance

Length variations due to machine movements and tolerances must be taken into account.

System pressure change

Adequate hose length should be used to accommodate changes in system pressure. Do not reconnect the high pressure hose to the low pressure hose.

Bend in the same plane

The hose should be bent in the same plane to avoid distortion. For complex bends, use multiple hoses or other isolation measures.

Teflon card sleeve coupling

Teflon double sleeve joint

Teflon female threaded joint

Teflon 37° flared female nipple

Teflon Male Thread Joint


The product name Examples of coding selection Appearance of the form

S 6 - T F L 1 - 0 2

- O T 0 2 - 1 P - 3 0 0 0 m m

S 6 - T F L 1 - 0 2

- O D 0 2 - 1 P - 3 0 0 0 m m

S 6 - T F L 1 - 0 2

- F R 0 2 - 1 P - 3 0 0 0 m m

S 6 - T F L 1 - 0 2

- F A N 0 2 - 1 P -3 0 0 0 m m

S 6 - T F L 1 - 0 2

- M N 0 2 - 1 P - 3 0 0 0 m m

Compiled SS30 layer PTFE content SS316 termination

n The structure is light and easy to operate and install

n Inner tube material: smooth pure PTEE outside

n Braided layer material: 304 stainless steel

n Working pressure up to: 207bar (3000PSLG)

n Hose size: 1/4 "to 1"

n Operating temperature: -53℃ to 204℃ (-65℉ to 400℉)

n Standard length and customizable length are available

Teflon connector


Hose connection Hose connection

Elongation

To shorten the

Elbows and change-over couplings can be used to eliminate hose strain

Bending parts too close to the hose/connector connection may cause the hose to break or leak

Bending radius

Minimum diameter length, 2 hoses OD


Panda tube clamp sleeve joint

Panda tube double clamp sleeve joint

Panda tube female thread joint

Panda tube 37° flared female thread joint


n The operating pressure and temperature range is greater than the corresponding range for

connecting the hose

n The shank design of the barb firmly maintains the inner diameter of the inner tube

n Hose couplings can be reused

Panda joint

S 6 - X M G - 0 2

- O T 0 2 - 1 P - 3 0 0 0 m m

S 6 - X M G - 0 2

- O D 0 2 - 1 P - 3 0 0 0 m m

S 6 - X M G - 0 2

- F R 0 2 - 1 P - 3 0 0 0 m m

S 6 - X M G - 0 2

- F A N 0 2 - 1 P - 3 0 0 0 m m

P V C P V CArtificial fiber reinforcement

SS316 termination

n Polyurethane coat: oil resistance, weather resistance and wear resistance

n Strong layer: High strength double woven layer of man-made fibres

n Working pressure up to: 345bar (5000psig) hose size: 3/16 "to 1"

n Operating temperature: -40℃ to 93℃ (-40℉ to 200℉

n Ending: 1/4" to 1 "pipe thread, 1/4 "to 1" and 6mm to 22mm double ferrules

n End material: stainless steel, brass and carbon steel

n Customizable length

n Inner tube: nylon

Sand - in pipe joints


Sand clamped pipe sleeve joint

Double clamp sleeve joint for sand pipe

Sand embedded pipe female thread joint

Sand - in tube 37° flared female thread joint


S 6 - J S G - 0 2

- O T 0 2 - 1 P - 3 0 0 0 m m

S 6 - J S G - 0 2

- O D 0 2 - 1 P - 3 0 0 0 m m

S 6 - J S G - 0 2

- F R 0 2 - 1 P - 3 0 0 0 m m

S 6 - J S G - 0 2

- F A N 0 2 - 1 P - 3 0 0 0 m m

Polyurethane coat


Fiber reinforced Nylon tube SS316 termination



Push-in type card sleeve joint

Push - in double sleeve joint

Push in male thread joint

Push-in hose coupling


n Cover: Synthetic rubber resistant to weather, wear and oil

n Reinforcement: a single layer of high strength synthetic woven yarn, providing maximum grip

for fixed joints

n Inner tube: high oil resistant rubber

n Hose colours: blue, black, green, grey, red and yellow

n Working pressure up to: 20.7bar (300psig)


n End material: stainless steel and brass end joints can be reused


Multi-purpose push-in hose

S 6 - P B - 0 2

- O T 0 2 - 1 P - 3 0 0 0 m m

S 6 - P B - 0 2

- O D 0 2 - 1 P - 3 0 0 0 m m

S 6 - P B - 0 2

- M N 0 2 - 1 P - 3 0 0 0 m m

S 6 - P B - 0 2 - 1 P -3 0 0 0 m m

NBR skin Artificial fiber reinforced layer NBR inner tube

Body material ClassesP1/P2 port types

Encoding rules

接头类型

S 6 TFL 02 02O D 1 P 3

The length of the



S6316

stainless steel

BMG Metal bellows 02 1/4" OT Card casing 02 1/4" 0.5P 500PSIG 3 3000mm

S6L316L

stainless steel

TFL1

Teflon Smooth PTFE(J polytetrafluoroethylene)

inner tube03 3/8" OD

The double card set

03 3/8" 1P 1000PSIGOther lengths are available

S4304

stainless steel

04 1/2" MN NPT male 04 1/2" 3P 3000PSIG

S4L304L

stainless steel TFL2

Teflon corrugated PTFE(J polytetrafluoroethylene)

inner tube06 3/4" FN

NPT female thread

05 5/8" 6P 6000PSIG

08 1" MR PT pin 06 3/4"

XMG The panda tube L11 1-1/8" FRPT female thread

08 1"

JSG Sand inclusion tubes L12 1-1/4" MAN37° flared male thread

6-16 Metric size: 6mm to 16mmPB Push in the connecting hose L14 1-1/2" FAN

37° flared female thread

PTFE Teflon tubes L2 2" GOBSPP thread O

sealOther

expressions: M teeth:

M5*0.8 UN teeth :5/1

6"-24

PFA Perfluoroalkoxy resin tube GEBSPP thread E

seal

PU Polycarbamate tubes GSBSPP thread S

seal

NL Wool tube GP1BSPP thread P1 seal

GP2BSPP thread type P2 seal

UN UN thread

M Metric thread

SFN

NPT female thread

removable joint

SMN

NPT male thread

removable joint

For other port types, please consult

Smytik after-sales service

Joint type Hose sizeP1/P2 port class

size

n Tube and joint material: 316 stainless steeln External braiding material: 304 stainless

steel (316 also available)n Can be used in vacuum and positive pressure

systemsn Working pressure up to: 213bar (3100 psig)

Hose size: 1/4 "to 2"n End connection: 1/4" to 2" pipe threads 1/4

"to 2" and 6mm to 50mm double ferrulesn Operating temperature: -200℃ to 426℃ (-325℉

to 800℉) hose and joint welding to ensure firm and reliable

n Standard length and customizable length are available

Metal flexible hose

Hose technical parameters (high pressure)

Technical parameters of hose (medium pressure)

316不锈钢管

304不锈钢外编织层

MH seriesMetal flexible hose MH/MM

Teflon TFL

Push into connecting hose PB

JSG sand inclusion pipe

Encoding rules

42

43

44

45

46

Hose

Pressure（pslg）

Pressure（bar）

3500

3000

2500

2000

1500

1000

500

241

206

172

137

103

69.0

34.4

0

-200 38 93 260 316 371 426

0

-325 100 200 300 400 500 600 700 800

149 204

MH4

MH6

MH12MH16

MH20

MH32MH24


MH8

Hose

316 stainless steel clamp sleeve joint

304 stainless steel exterior braided

316 stainless steel pipe

Hose size in.(mm)

Inside diameter in.

(mm)

Minimum bending radiusTemperature Range: ° F

(℃)

Working Pressure at 70 ° F (20 °

C)

Minimum Burst Pressure at 70 ° F (20 ° C) Psig (bar)

Hose seriesStatic in.

(mm)Dynamic in.

(mm)

1/4(6.4) 0.28(7.1) 2.25(57.2) 10.0(254)

-325 to 800(-200 to

426)

3100(213) 12400(854) MH4

3/8(9.7) 0.42(10.6) 3.00(76.2) 12.0(305) 2000(137) 8000(551) MH6

1/2(12.7) 0.53(13.5) 4.50(114) 16.0(406) 1800(124) 7200(496) MH8

3/4(19.0) 0.80(20.3) 6.00(152) 17.0(432) 1500(103) 6000(413) MH12

1(25.4) 1.03(26.0) 6.75(171) 20.0(508) 1200(82.6) 4800(330) MH16

1 1/4(31.8) 1.30(33.0) 8.86(225) 23.0(584) 950(65.4) 3800(261) MH20

1 1/2(38.1) 1.53(38.9) 11.0(280) 26.0(660) 900(62.0) 3600(248) MH24

2(50.8) 2.05(52.1) 13.8(350) 32.0(813) 500(34.4) 2000(137) MH32

Hose size in.(mm)

Inside diameter in.

(mm)

Minimum bending radius

Temperature Range: ° F

(℃)

Working Pressure at 70 ° F (20 °

C)

Minimum Burst Pressure at 70 ° F (20 ° C) Psig (bar)

Hose seriesThe spiral wave Circumferential wave

Static in. (mm)

Dynamic in. (mm)

Static in. (mm)

Dynamic in. (mm)

1/4(6.4) 0.25(6.4) 1.38(35) 8.66(220) 0.79(20) 4.33(110)

-325 to 800 (-200 to 426)

1600(110) 6400(440) MN4

3/8(9.7) 0.38(9.5) 2.36(60) 10.40(264) 0.98(25) 5.91(150) 1470(101) 6000(413) MN6

1/2(12.7) 0.50(12.7) 2.95(75) 11.89(302) 1.18(30) 4.88(124) 1110(76.4) 4500(310) MN8

3/4(19.0) 0.75(19.0) 3.54(90) 13.58(345) 1.50(38) 6.65(169) 860(59.2) 3500(241) MN12

1(25.4) 1.00(25.4) 4.13(105) 15.00(381) 1.77(45) 7.68(195) 680(46.8) 2680(184) MN16

1 1/4(31.8) 1.25(31.8) 4.72(120) 16.22(412) 680(46.8) 2600(179) MN20

1 1/2(38.1) 1.50(38.1) 5.51(140) 16.89(429) 520(35.8 2200(151) MN24

2(50.8) 2.00(50.8) 6.30(160) 18.43(468) 450(31.0)) 1800(124) MN32

MM4

MM6

MM12

MM16/MM20

MM32

MM24

MM8

MM series

Pres

sure

（ba

r）

Pres

sure

（ps

lg）

2000

1500

1000

500

0

-200 38 93 149 204 260 316 371 426

-325 100 200 500 600 700 800300 400

The temperature（℃）

137

103

69.0

34.4

0

The temperature（℉）


The temperature（℉）

软管

n The structure is light and easy to operate and

install

n Inner tube material: smooth pure PTFE outside

n Braided layer material: 304 stainless steel

n Working pressure up to: 207bar (3100 psig)


n Operating temperature: -53℃ to 204℃ (-65℉ to

400℉)

n Standard length and customizable length are

available

Teflon TFL

Temperature, pressure curve

n Cover: resistant to weather, wear and oil, synthetic

rubber

n Strong layer: a single layer of high strength

synthetic woven yarn with maximum grip for fixed

joints

n Inner tube: high oil resistant rubber

n Hose colours: blue, black, green, grey, red and

yellow

n Working pressure up to: 20.7bar (300psig)

n Hose size: 1/4 "to 3/4"


n Ending material: stainless steel and brass

n The end connector is reusable and can be customized

in length

Push into connecting hose PB

Temperature, pressure curve

Hose technical data

Synthetic rubberA single layer of high strength synthetic woven yarn

Synthetic rubber inner tube


Pressure（psig）

Pressure（bar）

3300

3000

2700

2400

2100

1800

1500

1200

900

600

300

0

227.6

206.9

186.2

165.5

144.8

124.1

103.4

82.8

62.1

41.4

20.7

0

-100 100 200 300 400 600

-73.3 38 93 149 204 316

PS4

PS6

PS8

PS12

PS16

350


300

250

200

150

100

50

0

24.1

20.7

17.2

13.7

10.3

6.8

3.4

0

-40 70 200

-40 20 88

100 150

37 65

Hose Hose

Smooth pure PTFE inner tube

316 stainless steel clamp sleeve joint

304 stainless steel exterior braided


The temperature（℉） The temperature（℉）

Pressure（psig）

Pressure（bar）

Hose technical data Hose size

in.(mm)The inner diameter

in.(mm)

Minimum bending radiusTemperature range

℉(℃)Working Pressure at

70 ° F (20 ° C)

Minimum Burst Pressure at 70 ° F (20

° C) Psig (bar) Static in.(mm) Dynamic in.(mm)

1/4(6.4) 0.19(4.8) 1.5(38.1) 2.0(50.8)

-65 to 400(-53 to 204)

3000(206) 12000(826)

3/8(9.5) 0.31(7.9) 3.5(88.9) 5.0(127) 2500(172) 10000(690)

1/2(12.7) 0.41(10.3) 4.5(114) 6.0(152) 2000(137) 8000(551)

3/4(19.0) 0.63(15.9) 6.0(152) 7.5(190) 1500(103) 6000(413)

1(25.4) 0.88(22.2) 9.0(229) 11.3(287) 1000(68) 4000(275)

Hose size in.(mm)The inner diameter

in.(mm)

Minimum bending radius Temperature range

℉(℃)Working Pressure at

70 ° F (20 ° C)

Minimum Burst Pressure at 70 ° F (20 ° C) Psig (bar)Static in.(mm)

1/4(6.4) 0.26(6.6) 2.50(63.5)

-40 to 200(-40 to 93)

300(20.6) 1200(82.7)3/8(9.5) 0.39(9.9) 3.00(76.2)

1/2(12.7) 0.50(12.7) 5.00(127)

3/4(19.0) 0.76(19.3) 7.00(178)

n Polyurethane coat: resistance to oil, weather

and wear

n Reinforcement layer: high strength double layer

of braided man-made fibers

n Inner tube: nylon

n Working pressure up to: 345bar (5000 psig)



200℉)

n End connection: 1/4 to 1 pipe thread, 1/4" to 1"

and 6mm to 22mm double ferrules

n End material: stainless steel, brass and carbon

steel


JSG sand inclusion pipe

Thermoplastic hydraulic hose（SAE 100R7）

Thermoplastic Hydraulic Hose (SAE 100R8)

The outer braiding layer material

Classes

Encoding rules

S 4

TFL 02 1 P 3

The length of the


Hose Hose

S6316 stainless

steelBMG Metal bellows 015 3/16" 0.5P 500PSIG 3 3000mm

S4304 stainless

steel

TFL1Teflon Smooth PTFE

(J polytetrafluoroethylene) inner tube

02 1/4" 1P 1000PSIGOther lengths are

available

No outer braiding is not filled 025 5/16" 3P 3000PSIG

TFL2Teflon corrugated PTFE

(J polytetrafluoroethylene) inner tube

03 3/8" 6P 6000PSIG

04 1/2"

XMG The panda tube 06 3/4"

JSG Sand inclusion tubes 08 1"

PB Push in the connecting hose L12 1-1/4"

PTFE Teflon tubes L14 1-1/2"

PFA Perfluoroalkoxy resin tube L2 2"

PU Polycarbamate tubes

NL Wool tube

Hose type Hose size

Fiber reinforced layer

Inner tube

The polyurethane skin

Hose size in.(mm)

Hose seriesMinimum

bending radius in.(mm)

Hose diameter in.(mm)

Temperature range℉(℃)

Working Pressure at 70

° F (20 ° C)

Minimum Burst Pressure at 70

° F (20 ° C) Psig (bar)

Specifications

3/16(4.8) TH3 1.58(40) 0.19(4.8)

-40 to 200(-40 to 93)

3000(207) 12000(828)

SAE J517100R7

1/4(6.4) TH4 1.97(50) 0.25(6.4) 2750(189) 11000(758)

5/16(8.0) TH5 2.36(60) 0.31(7.9) 2500(173) 10000(690)

3/8(9.6) TH6 2.95(75) 0.38(9.8) 2250(155) 9000(620)

1/2(12.7) TH8 3.74(95) 0.50(12.7) 2000(137) 8000(551)

Hose size in.(mm) Hose seriesMinimum bending radius in.(mm)

Hose diameter in.(mm)

Temperature range℉(℃)

Working Pressure at 70 ° F (20 ° C)

Minimum Burst Pressure at 70 ° F (20 ° C) Psig

(bar)

Specifications

3/16(4.8) TH3 2.00(50.8) 0.19(4.8)

- 40 to 200(to 40 to

93)

5000(344) 20000(1378)

SAE J517100R8

1/4(6.4) TH4 2.00(50.8) 0.25(6.4) 5000(344) 20000(1378)

3/8(9.6) TH6 2.5(63.5) 0.38(9.8) 4000(275) 16000(1102)

1/2(12.7) TH8 4.00(102) 0.50(12.7) 3500(241) 14000(964)

3/4(19.0) TH12 6.50(165) 0.75(19.0) 2250(155) 9000(620)

1(25.4) TH16 10.0(25.4) 1.00(25.4) 2000(137) 8000(551)

Tube standardThe recommended allowable working pressure for stainless steel pipes

Level Standard

TP316L

TP304LA269, A213, S A 2 13

N P S

W a l l t h i c k n e s s（ A S M E B 3 6 . 1 9 M）

5 S 1 0 S 4 0 S 8 0 S

Pressure of work psig(bar)

1/8 - 3940(272) 5750(397) 8700(600)

1/4 - 3960(273) 5620(387) 8130(560)

3/8 - 3110(215) 4540(313) 6660(459)

1/2 2470(170) 3220(222) 4370(301) 6190(427)

3/4 1960(135) 2540(175) 3550(245) 5040(348)

1 1550(107) 2680(185) 3330(229) 4650(320)

1 1/4 1230(85) 2110(146) 2760(190) 3890(268)

1 1/2 1070(74) 1830(126) 2460(170) 3520(243)

2 840(58) 1430(99) 2060(142) 2990(206)

Pipe tube standardLevel

TP316L

TP304LA S T M A 3 1 2 / A 3 1 2 M /A S M E / B 3 6 . 1 0

Pipe size

N P S

Outer diameter

Wall Thickness No (wall thickness mm)

In. m m 5 S 5 1 0 S 1 0 20 30 40s 4 0 S T D 6 0 8 0 S 8 0 XS 1 0 0 120 1 4 0 1 6 0 X X S

1/8 0.4 10.3 1.2 1.2 1.448 1.7 1.7 1.7 2.4 2.413 2.413

1/4 0.5 13.7 1.7 1.7 2.2 2.2 2.2 3.0 3.0 3.0

3/8 0.6 17.1 1.7 1.7 1.845 2.3 2.3 2.3 3.2 3.2 3.2

1/2 0.8 21.3 1.7 1.7 2.1 2.1 2.413 2.8 2.8 2.8 3.7 3.7 3.7 4.8 7.5

3/4 1.0 26.7 1.7 1.7 2.1 2.1 2.413 2.9 2.9 2.9 3.9 3.9 3.9 5.6 7.8

1 1.3 33.4 1.7 1.7 2.8 2.8 2.900 3.4 3.4 3.4 4.5 4.5 4.5 6.4 9.1

1 1/4 1.6 42.2 1.7 1.7 2.8 2.8 2.972 3.6 3.6 3.6 4.9 4.9 4.9 6.4 9.7

1 1/2 1.9 48.3 1.7 1.7 2.8 2.8 3.175 3.7 3.7 3.7 5.1 5.1 5.1 7.1 10.2

2 2.3 60.3 1.7 1.7 2.8 2.8 3.175 3.9 3.9 3.9 5.5 5.5 5.5 8.7 11.1

2 1/2 2.8 73.0 2.1 2.1 3.1 3.0 4.775 5.2 5.2 5.2 7.0 7.0 7.0 9.5 14.0

3 3.5 88.9 2.1 2.1 3.1 3.0 4.775 5.9 5.9 5.9 7.6 7.6 7.6 11.1 15.2

3 1/2 4.0 101.6 2.1 2.1 3.1 3.0 4.775 5.7 5.7 5.7 8.1 8.1 8.1 13.5

4 4.5 114.3 2.1 2.1 3.1 3.0 4.775 6.0 6.0 6.0 8.6 8.6 8.6 11.1 15.9 17.1

5 5.5 141.3 2.8 2.8 3.4 3.4 6.6 6.6 6.6 9.5 9.5 9.5 12.7 18.3 19.1

6 6.6 168.3 2.8 2.8 3.4 3.4 7.1 7.1 7.1 11.0 11.0 11.1 14.3 23.0 21.9

8 8.6 219.1 2.8 2.8 3.8 3.8 6.4 7.0 8.2 8.2 8.2 10.3 12.7 12.7 12.7 15.1 18.3 20.6 28.6 22.2

10 10.7 273.1 3.4 3.4 4.2 4.2 6.4 7.8 9.3 9.3 9.3 12.7 12.7 15.1 12.7 18.3 21.4 25.4 33.3 25.4

12 12.7 323.9 4.0 4.0 4.6 4.6 6.4 8.4 9.5 10.3 9.5 14.3 12.7 17.5 12.7 21.4 25.4 28.6 35.7 25.4

14 14.0 355.6 4.0 4.0 4.8 4.8 7.9 9.5 9.5 11.1 9.5 15.1 12.7 19.1 12.7 23.8 27.8 31.8 40.5

16 16.0 406.4 4.2 4.2 4.8 4.8 7.9 9.5 9.5 12.7 9.5 16.7 12.7 21.4 12.7 26.2 31.0 36.5 45.2

18 18.0 457.2 4.2 4.2 4.8 4.8 7.9 11.1 9.5 14.3 9.5 19.1 12.7 23.8 12.7 29.4 34.9 39.7 50.0

20 20.0 508.0 4.8 4.8 5.5 5.5 9.5 12.7 9.5 15.1 9.5 20.6 12.7 26.2 12.7 32.5 38.1 44.5 54.0

22 22.0 558.8 4.8 4.8 5.5 5.5 9.5 12.7 9.5 22.2 28.6 12.7 34.9 41.3 47.6 59.5

24 24.0 609.6 5.5 5.5 6.4 6.4 9.5 14.3 9.5 17.5 9.5 24.6 12.7 31.0 12.7 38.9 46.0 52.4

26 26.0 660.4 12.7 9.5 12.7

28 28.0 711.2 12.7 15.9 9.5 12.7

30 30.0 762.0 6.4 6.4 8.0 8.0 12.7 15.9 9.5 12.7

32 32.0 812.8 12.7 15.9 17.5 9.5 12.7

34 34.0 863.6 12.7 15.9 17.5 9.5 12.7

36 36.0 914.4 12.7 15.9 19.1 9.5 12.7

48-49

50-51

51

Hard pipe, Coil pipe

The hard tube

Coil

Encoding rules



Standard

Seamless Tube, inch stainless steel

Metric stainless steel seamless Tube

The imperial

Allowable working pressure at room temperature

The metric system

n Material: 316/316L, 304/304L

n Outside diameter: 1.5mm-12 mm, 1/16"- /2"

n Operating Temperature: -198°C to 537°C (-325 ° F to

1000 ° F)

n Bright annealing, mechanical polishing of exterior

surface

n The safety factor between the joint and the steel pipe

and the steel pipe is 4:1

Coil


Hard pipe, Coil pipe Hard pipe, Coil pipe

Outer diameter (mm)

Wall thickness(mm)

0.8 1 1.2 1.5 1.8 2 2.2 2.5 2.8 3 3.5 4 4.5 5

Pressure of work bar

Note: For gas applications, select the shadow outside the specification

3 670

6 310 420 540 710

8 310 390 520

10 240 300 400 510 580

12 200 250 330 410 470

14 160 200 270 340 380 430

15 150 190 250 310 360 400

16 170 230 290 330 370 400

18 150 200 260 290 320 370

20 140 180 230 260 290 330 380

22 120 160 200 230 260 300 340

25 180 200 230 260 290 320

28 180 200 230 260 280 330

30 170 180 210 240 260 310

32 160 170 200 220 240 290 330

38 140 160 190 200 240 270 310

50 150 180 210 240 270

NPS

Wall thickness(In.)

0.01 0.012 0.014 0.016 0.02 0.028 0.035 0.049 0.065 0.083 0.095 0.109 0.12 0.134 0.156 0.188

Pressure of work psig

Note: For gas applications, select the shadow outside the specification

1/16 5600 6800 8100 9400 12000

1/8 8500 10900

3/16 5400 7090 10200

1/4 4000 5190 8000 10200

5/16 4090 6500 8000

3/8 3390 5100 6500 7500

1/2 2600 4000 5100 6700

5/8 3300 4000 5200 6000

3/4 2800 3300 4200 4900 5800

7/8 2400 2800 3600 4200 4800

1 2400 3100 3600 4200 4700

11/4 2400 2800 3300 3600 4100 4900

11/2 2300 2700 3000 3400 4000 4900

2 2000 2200 2500 2900 3600

Outer diameter (mm)

Wall thickness(mm)

0.8 1 1.2 1.5 1.8 2 2.2 2.5 2.8 3 3.5 4 4.5 5

Pressure of work bar is allowed

3 670

6 310 420 540 710

8 310 390 520

10 240 300 400 510 580

12 200 250 330 410 470

14 160 200 270 340 380 430 490

15 150 190 250 310 360 400 450

16 170 230 290 330 370 400

18 150 200 260 290 320 370

20 140 180 230 260 290 330 380

22 140 160 200 230 260 300 340

25 180 200 230 260 290 320

28 180 200 230 260 280 330

30 170 180 210 240 260 310

32 140 170 200 220 240 290 330

38 140 160 190 200 240 270 310

50 150 180 210 240 270

Outer diameter (in.)

Wall thickness(mm)

0.01 0.012 0.014 0.016 0.02 0.028 0.035 0.049 0.065 0.083 0.095 0.109 0.12 0.134 0.156 0.188

Pressure of work bar is allowed

1/16 670 6800 8100 9400 12000

1/8 310 8500 10900

3/16 5400 7000 10200

1/4 4000 5100 7500 10200

5/16 4000 5800 8000

3/8 3300 4800 6500

1/2 2600 3700 5100 6700

5/8 2900 4000 5200 6000

3/4 2400 3300 4200 4900 5800

7/8 2000 2800 3600 4200 4800

1 2400 3100 3600 4200 4700

11/4 2400 2800 3300 3600 4100 4900

11/2 2300 2700 3000 3400 4000 4900

2 2000 2200 2500 2900 3600

Size

The metric systemThe imperial

Body material Hose typeOutsside Dimension

Wall thickness Length Surface state

Encoding rules

S 6 T U B E 225 *

*

B A P3

Quick connector QC

Quick connector KS

Encoding rules

53-54

54-55

55

Quick connector QC/KS



S6 316 stainless steel TUBE TUBE tube 005 1/6" 010 0.01”(0.254mm) 2 2000mmMP

The exterior surface is mechanically polished

S6L 316L stainless steel PIPE PIPE tube 01 1/8" 012 0.012”(0.3048mm) 3 3000mm

S4 304 stainless steel PG Coil 015 3/16" 014 0.014”(0.3556mm) 4 4000mm BAP Bright annealing

S4L 304L stainless steel 02 1/4" 016 0.016”(0.4064mm) 6 6000mm EP Electrolytic polishing

M Alloy 400 025 5/16" 020 0.02”(0.508mm) Specified length can

contact SMTIK after-sales service

AP Pickling

HC C276 alloy 03 3/8" 028 0.028”(0.7112mm)

INC Alloy 600 04 1/2" 035 0.035”(0.889mm)

05 5/8" 049 0.049”(1.2446mm)

06 3/4" 065 0.065”(1.651mm)

07 7/8" 083 0.083”(2.1082mm)

08 1" 095 0.095”(2.413mm)

L11 1-1/8" 109 0.109”(2.7686mm)

L12 1-1/4" 120 0.12”(3.048mm)

L14 1-1/2" 134 0.134”(3.4036mm)

L2 2" 156 0.156”(3.9624mm)

2-50 Metric size:

2mm-50mm

188 0.188”（4.7752mm)

0.8-5 Metric size: 0.8mm to 5mm

Outer diameter (in.)

Wall thickness (in.)

Standard Single Volume ① Supply Length

(ft)

Standard Maximum ② Available length (ft)

1/16 0.016 200 400

1/8 0.028 200 400

1/4

0.035 600 2130

0.049400

1550

0.065 1280

3/8

0.035 400 1300

0.049300

970

0.065 760

1/2

0.035 300 950

0.049

220

700

0.065 550

0.083 450

Outer diameter (mm)

Wall thickness (mm)

Standard Single Volume ①

Supply Length (m)

Standard maximum ② Available length (m))

1.5 0.4 60 120

3 0.7 60 120

6

0.8

120

650

1 600

1.2 520

1.5 450

8

1

120

380

1.2 350

1.5 310

10

1

120

320

1.2 280

1.5 240

12

112

240

1.2 230

1.512

190

2 150

DESO valve O-ring

Structural materials

Single-ended shut off（SESO） Double end cutoff (SESO) - red tube stem cannula

The pipe stem

Pipe stem casing

The shell The tube body

Locking devices

Stem seal O-ring

Insert seal O-ring

Quick couplings -QC series

n Polyurethane coat: resistance to oil, weather and

wear

n Reinforcement layer: high strength double layer

of braided man-made fibers

n Inner tube: nylon

n Working pressure: 345bar (5000 psig) Hose size:

3/16 "to 1"


200℉)

n End connection: 1/4 to 1 pipe thread, 1/4" to 1"

and 6mm to 22mm double ferrules

n End material: stainless steel, brass and carbon

steel


QC clamp tube stem

QC positive thread tube stem

QC female thread tube stem

QC clamp casing body

QC positive thread tube body

QC female thread pipe body

S 6 - Q C 0 4 - O D 0 6 - P

S 6 - Q C 0 4 - M N 0 6 - P

S 6 - Q C 0 4 - F N 0 6 - P

S 6 - Q C 0 4 - O D 0 6 - S

S 6 - Q C 0 4 - M N 0 6 - S

S 6 - Q C 0 4 - F N 0 6 - S



Quick connector -KSn Working pressure up to: 137bar(2000 psig)

n The large flow area of the tube stem and body ensures high flow

n The valve closes automatically, maintaining the metal-to-metal valve in

alignment to ensure that the valve is fully opened each time

n Hardened stem and sleeve and solidified cold-drawn bar construction minimize

resistance to hydraulic and mechanical vibration

n Reliable sealing and high pressure resistance

n Durable ball lock ensures a strong and reliable connection

Two-way flow


Quick connector QC/KS Quick connector QC/KS

ElementMaterial

Stainless steel Brass

Tube body, tube stem, tube body valve, tube body plug-in 316 SS Brass C36000

DESO valve, DESO fixed valve 316 SS 316 stainless steel, brass, C36000

SESO tube stem insertion key 316 SS C26000 brass

O-ringsFluorocarbon FKM, ethylene propylene, perfluorine FFKM

Nitrile rubber NBR

Spring 316 SS

Retaining ring 302 SS

The valve body casing Powder Metal 300 Series SS Brass C36000

The shell 316 stainless steel Brass C36000

Deso tube stem cannula Polyurethane glaze 316 SS Polyurethane glazed brass C36000

Stem cannula of SESO tube 316 SS Brass C36000

Calm device 316 SS powder metal coated with Xylan

lubricant Silicone base

lubricant PTFE base

Wetting elements are identified in bold type. Other O-ring materials and lubricants are available, please contact us.

Casing pipe body

Pipe valve O-ring


Encoding rules

S 6

Q C O D 04 S

Pipe diameter or pipe body

KS female thread tube body S 6 - K S 0 4 - F N 0 4 - S

The product selectionThe product name Examples of coding selection Appearance of the form

Structural materials

Pressure-temperature ratings

Product introduction

Encoding rules

57

57


Filter joint

Quick connector QC/KS

S6 316 stainless steel QC QC quick connector OD The double card set 01 1/8" P Pipe diameter

S6L 316L stainless steel QCB QC through plate quick connector MN NPT male 02 1/4" S The tube body

S4 304 stainless steel KS KS quick connector FN NPT female thread 03 3/8"

B Brass MR PT pin 04 1/2"

FR PT female thread 06 3/4"

08 1"

L11 1-1/8"

L12 1-1/4"

L14 1-1/2"

L2 2"

6 to 12 Metric size:

6mm-12mm

Joint type Port type Port size

KS female thread tube stem S 6 - K S 0 4 - F N 0 4 - P

PartsStainless steel Brass

Material grade /ASTM specification

The tube body 316 stainless steel /A479 C30666/B16

Locating ring 304 stainless steel

Locating piece 316 stainless steel /A479 BrassC36000/B16

spring 316 stainless steel /A313

The valve stem 316 stainless steel /A479 C36000/B16

O-ring Fluorocarbon FKM Nitrile rubber NBR

Spring 316 stainless steel /A313

Lock the ball 440C/A276

Casing pipe body 316 stainless steel /A479 C36000/B16

Shaft with retaining ring 316 stainless steel /A313

The pipe stem 316 stainless steel /A479 C36000/B16

lubricant Silicone grease

The tube body material Stainless steel Brass

O-ring Fluorocarbon rubber Nitrile rubber

Temperature range -23℃ to 204℃ (-10℉ to 400℉) -23℃ to 121℃ (-10℉ to 250℉)

Pressure of workbar(psig) 137（2000） 103（1500） 69.0（1000）

Filter joint

Straight through filter (GLF series) T-filter

■ Straight - through filters can be used where space is limited.

■ Replacement sintered filter elements with nominal hole sizes of 0.5, 2, 7, 15, 60 and 90 μm:

■ The replaceable mesh filter elements have nominal hole sizes of 40, 140,230, and 440 μm.

■ End-ups include Smetticka sleeve couplings, NPT, sleeve changeover couplings, and VCR face seals with external threads.

■ The filter element can be replaced without dismantling the body.

■ Replacement sintered filter elements with nominal hole sizes of 0.5, 2, 7, 15, 60 and 90 μm:

■ The replaceable mesh filter elements have nominal hole sizes of 40, 140,230, and 440 μm.

■ Ends include SMYTIK sleeve joints, NPT and sleeve socket welding or sleeve butt welding ends.。

Filter series F W , T F 2F, 4 F 6F, 8 F F T F

Material 3 1 6 S S Brass

Temperature ℃ (℉) Pressure of work psig(bar)

-28(-20)to37(100) 6000(413) 3000(206) 2500(172) 1000(68.9) 2000(137)

93(200) 5160(355) 2580(177) 2150(148) 780(53.7) 1730(119)

148(300) 4660(321) 2330(160) 1940(133) 680(46.8) 1470(101)

204(400) 4280(294) 2140(147) 1780(1220) - -

260(500) 3980(274) 1990(137) 1660(114) - -

315(600) 3760(259) 1880(129) 1560(107) - -

343(650) 3700(254) 1845(127) 1540(106) - -

371(700) 3600(248) 1800(124) 1500(103) - -

398(750) 3520(242) 1760(121) 1460(100) - -

426(800) 3460(238) 1725(118) 1440(99.2) - -

454(850) 3380(232) 1690(116) 1410(97.1) - -

482(900) 3280(225) 1640(112) 1360(93.7) - -


Series

Encoding rules

S 6 F W O D 04

■ Filtering system for particulate

pollutants

■ Used for gases and liquids

■ 1/8 to 1/2 in. And 3 to 12 mm

■ Ended with stainless steel and brass

material

Medium high pressure connector

Medium high pressure valve

Encoding rules

59

60

60

Medium and high pressure joints, valves


Filter joint

S6 316 stainless steel FW Straight-through filter OD The double card set 01 1/8"

S6L 316L stainless steel FT Three-way filter MN NPT male 02 1/4"

S4 304 stainless steel FN NPT female thread 03 3/8"

S4L 304L stainless steel MR PT pin 04 1/2"

FR PT female thread 6 to 12Metric size: 6mm-12mm

M Metric thread

Entry/Exit types Inlet/Exit dimensions

Bypass holes are available

Pictured are sintered filter elements. Screen filter elements are available

Pictured are sintered filter elements. Screen filter elements are available

Medium pressure taper thread end shown on the left side of connector

The nozzles create a load on the ring to ensure sealing on the card sleeve and body Angle area

The ring is tapped on the vertebral body and tapped on the clamp sleeve with left-hand thread to prevent accidental disassembly of the ring during installation

Installation of taper threaded joints requires taper threaded pipe high pressure clamp sleeves to have thicker walls than medium pressure clamp sleeves

Medium pressure taper thread end shown on right side of connector

Joint ontology The primaryLeakage holes support leak detection and validation for proper installation

Medium pressure connection

High pressure coupling

The intermediate pressure elbow

The high pressure elbow

Medium pressure tee joint

High pressure tee

S 6 - M P - B 0 4 - 1 5 P

S 6 - H P - B 0 4 - 2 0 P

S 6 - M P - L 0 4 - 1 5 P

S 6 - H P - L 0 4 - 2 0 P

S 6 - M P - T 0 4 - 1 5 P

S 6 - H P - T 0 4 - 2 0 P

Medium high pressure connector


中高压接头︑阀门

Medium high pressure valve


High pressure through needle valve

High pressure Angle needle valve

Medium pressure through ball valve

Medium pressure three-way ball valve

S 6 - H P N V - B 0 2 - 2 0 P

S 6 - H P N V - L 0 2 - 2 0 P

S 6 - M P B V - B 0 2 - 1 5 P

S 6 - M P B V - T 0 2 - 1 5 P


Encoding rules

本体材料系列接口类型

S 6 M P B 20P

压力等级Body material Series Classes

04


Medium and high pressure joints, valvesMedium and high pressure joints, valves

S6 316 stainless steel MPMedium pressure

connection B The pass-through 02 1/4" 15P 15000PSIG

S6L 316L stainless steel HP High pressure coupling L Elbow/corner type 03 3/8" 20P 20000PSIG

MPBVMedium pressure ball

valve T Tee 04 1/2" 60P 60000PSIG

HPMV High pressure needle valve UR Four-way 06 3/4"

08 1"

L14 1-1/2"

The interface type The interface size


Medium pressure four-way connector

High pressure four-way connector

S6-MP-UR04-15P

S6-HP-UR04-20P

Check valve -CV series

n Elastic sealing ring seat, no noise, effective check

n Maximum working pressure: 207 bar (3000 psig)

n Operating Temperature: -23 ° C to 190 ° C (-10 °

F to 375 ° F) Opening Pressure: 0.02 to 1.7 bar

(1/3 to 25 psig)

n Body material: stainless steel, brass, carbon steel

and alloy steel available


Double cartridge CV check valve

CV check valve with female thread

CV check valve with positive thread

V C R - C V c h e c k v a l v e

S 6 - C V - O D 0 4 - 1 P

S 6 - C V - F N 0 4 - 1 P

S 6 - C V - M R 0 4 - 1 P

S 6 - C V - V C R 0 4 - 1 P


62

63

63

Check valve Check valve -CV series


Check valve -CL series

Encoding rules

Check valve

Check valve -CL series

The product selectionThe product name

Double clamp CL check valve

CL check valve with female thread

Butt-welded CL check valve

Double ferrules * CL check valve with female thread

S 6 - C L - O D 0 4 - 1 P

S 6 - C L - F N 0 4 - 1 P

S 6 - C L - T B 0 4 - 1 P

S 6 - C L - O D 0 4 - 1 P

Examples of coding selection Appearance of the form

Body material Series

Encoding rules

S 6 C V O D 04 3 P

Opening pressure Exit型


Encoding rules

65

65

Relief valve


n Combination bonnet design for safety, all metal construction, horizontal mounting

n Maximum working pressure: 414 bar (6000 psig)n Operating temperature: -54℃ to 482℃ (-65℉ to 900℉ )n Body material: stainless steel, carbon steel and alloy steel available

Check valve

S6 316 stainless steel CV CV series check valve OD The double card set 01 1/8" 3P 3psig

S6L 316L stainless steel CL CL series check valve MN NPT male 02 1/4" 0.3P 1/3psig

S4 304 stainless steel FN NPT female thread 03 3/8" 1P 1psig

S4L 304L stainless steel MR PT pin 04 1/2" 10P 10psig

FR PT female thread 06 3/4" 25P 25psig

TB TUBE pipe butt welding 08 1"

TS TUBE pipe welding 6 to 12 Metric size: 6mm-12mmPB PIPE PIPE butt welding

PS PIPE PIPE welding

VCRMetal gasket end face

sealing joint

Entry/Exit types Inlet/Exit dimensions


Male thread relief valve bar handle

Male thread relief valve SAE thread

Male thread relief

valve bar handle with

barbed drain pipe

S 6 - X F - O D 0 3 - B

S 6 - X F - M N 0 3 - D - B

S 6 - X F - G O 03


Stem threads and head chrome plated to extend valve life

n Compact structure, easy to install

n Maximum working pressure: 689 bar (10 000 psig)


n Body material: stainless steel, carbon steel, alloy R-

400 and other materials are available

Relief valve


Numbering rules

S 6

X F O D 02 B

The handle

D

Discharge tube

Product introduction and product selection

Encoding rules

67

68

Unloading valve


Relief valve

S6 316 stainless steel XF Relief valve MN NPT male 01 1/8" Normal discharge pipe Without a handle

S6L 316L stainless steel MR PT pin 02 1/4" D With barbed drain pipe B With bar handle

S4 304 stainless steel M Metric thread 03 3/8"

S4L 304L stainless steel 04 1/2"

Other expressions: M teeth: M5*0.8

Entry type The entrance size

S 6 - R V - O D 0 3

S 6 - R L - M N 0 3 - F N 0 3

S 6 - R M - M N 0 3 - O D 0 3

Dual sleeve RV unloading valve

Male thread * sleeve RL unloading valve

Male thread * female thread RM unloading valve


Encoding rules

S 6 R V O D 04

Spring color

B M

Superdrive control handle

Exit类型

RVn Set pressure: a variety of springs are available for selection, increasing the opening pressure

range from 0.34 ℃ to 414bar@20℃(50 to normal ℉)

n Maximum pressure at outlet: 103 bar (1500 psig)

n Balanced stem design eliminates the influence of back pressure on opening pressure


n Can be used in gas or liquid

n Adjustable bonnet cover with adjustable opening pressure

n Anti-loose wire hole can effectively maintain the set opening pressure

n A variety of sealing materials are available

n The label indicates the range of opening pressure

RLn Set pressure: 0.68 to 15.5 bar @ 20 C (10 to 225 psig @ 70 F)

n Maximum pressure at outlet: 15.5 bar (225 psig)

n Preset pressure = required pressure -0.8× back pressure


n Can be applied to gases or liquids

n Adjustable bonnet cover with adjustable opening pressure

n Anti-loose wire hole can effectively maintain the set opening pressure

n A variety of sealing materials are available

R Mn Set pressure: Multiple springs are available for selection, increasing the selection range of

opening pressure from 3.4 ℃ to 103bar@20℃(50 ℃ to normal ℉)n Maximum pressure at outlet: 103 bar (1500 psig)n Balanced stem design eliminates the influence of back pressure on opening pressuren Operating temperature: -23℃ to 148℃ (-10℉ to 300℉)n Can be used in gas or liquidn Adjustable bonnet cover with adjustable opening pressuren Anti-loose wire hole can effectively maintain the set opening pressuren A variety of sealing materials are availablen The label indicates the range of opening pressure




Unloading valve Unloading valve

S6316 stainless

steelRV

The RV unloading valve

ODThe double card

set 01 1/8" Yellow 10 to 25psig(RL series only) There is no

MN NPT male 02 1/4" G Green 50 to 300psig (RV and RM series) M Wear manual overdrive

control gloves

S6L316L stainless

steelRM

The RM unloading valve

FN NPT female thread 03 3/8" OOrange 300 to 700psig (RV and RM

series)

MR PT pin 04 1/2" YYellow 700 to 1500psig (RV and RM

series)

RLRL unloading

valveFR PT female thread 06 3/4" P Purple 1500 to 2500psig(RV series only)

M Metric thread 6 to 12Metric size:

6mm-12mm

W White 2500 to 3500psig(RV series only)

B Blue 3500 to 4500psig(RV series only)

R Red 4500 to 6000PSIG (RV Series only)

N There is no spring

Entry/Exit typesInlet/Exit dimensions

The pressure regulating valve reduces the pressure of the gas or hydraulic discharged from the

cylinder, compressor, etc., to the lower value required by the analyzer, etc. When the inlet

pressure and control range pressure are very close to the pressure requirements of the liquid

treatment system, the resolution and control ability of the pressure regulating valve is higher.

Resolution refers to the number of handle turns required to adjust the pressure regulating valve

from the lowest outlet pressure setting to the highest outlet pressure device. Control capacity

refers to the ability of a pressure regulating valve to maintain a given outlet pressure set point.

Pressure regulating valveThe pressure relief valve controls the outlet pressure by balancing the force generated by the inlet

pressure and the outlet pressure through the adjustable spring force. The spring can be adjusted by

turning the stem/handle to set the desired outlet pressure.

As the inlet pressure decreases, the force balance will change. To achieve equilibrium, the outlet

pressure will be increased. This supply effect (SPE) is an effect of the pressure regulating valve

design and type. If the inlet pressure of the pressure regulating valve often fluctuates, but you do

not want the outlet pressure to change, you can use a two-stage pressure regulating valve.

Back pressure regulating valveThe back pressure regulating valve controls the inlet pressure by balancing the inlet pressure with

spring force. The spring force can be adjusted by turning the valve/handle to set the desired inlet

pressure. When the force generated by the inlet pressure rises to exceed the spring force, the

pressure regulating valve opens until the balance between the spring force and the inlet pressure is

regained.


R21 series small flow stainless steel pressure reducing valve, R22 series medium flow stainless steel pressure reducing valve

R23 series medium flow stainless steel pressure reducing valve, R31 series bipolar stainless steel pressure reducing valve

R44 series high pressure stainless steel pressure reducing valve, R46 series high pressure medium flow stainless steel pressure reducer

R48 series high pressure and large flow stainless steel pressure reducer, R50 series micro pressure stainless steel pressure reducing valve

R60 series vacuum stainless steel pressure reducing valve, R66 series large flow stainless steel pressure reducer

R68 series large flow stainless steel pressure reducer, R72 series medium pressure piston stainless steel back pressure valve

R77 series low pressure diaphragm stainless steel back pressure valve, ASC series semi-automatic switching system

GQ series one-side air supply panel, ZD series terminal control panel

Code selection

70

71

72

73

74

75

76

77

78

79

Pressure reducing valve



Operation of pressure regulating valve

R21 series low flow stainless steel pressure reducing valves

Product features

n Economical, compact structure, stable output pressuren Metal seals are used between the diaphragm and the bodyn Can be used for corrosive, non-corrosive, toxic gasesn Metal diaphragm ensures output stability and service lifen Optional panel installation

R21 series stainless steel pressure reducing valve adopts single-stage diaphragm structure, stable output pressure, suitable for gas instrument analysis, all kinds of high purity gas and corrosive gas, etc.

Featuresn Inlet and outlet air connection: 1/4"NPT

n Maximum inlet pressure: 500/3500 psi

n Output pressure range: 0-50,0-150,0-250 psi

n Operating temperature: -40℃ to 74℃

n Leakage rate: 1*10-6atm.cc/ SEC He

n CV value: 0.15

n Body: 316 l

n The valve core: 316 l

n Seat: PTFE/PCTFE

n Other parts: 304

Featuresn Inlet and outlet air connection: 1/2"NPTn Maximum inlet pressure: 500/3500 psin Output pressure range: 0-50,0-150,0-250 psin Operating temperature: -40℃ to 74℃n Leakage rate: 1*10-6atm.cc/ SEC Hen CV value: 1.6n Body: 316 ln The valve core: 316 ln Seat: PTFE/PCTFEn Other parts: 304

R22 series medium flow stainless steel pressure reducing valves

Product features

R21 series stainless steel pressure reducing valve adopts single-stage diaphragm structure, stable output pressure, high sensitivity, mainly used in medium flow gas system.

n Compact structure, large flow raten Metal seals are used between the diaphragm and the bodyn Large area metal diaphragm, accurate adjustmentn Metal diaphragm ensures output stability and service lifen Multiple outlet pressure rangesn Optional panel installation

R23 series medium flow stainless steel pressure reducing valves

Product featuresn Compact structure, large flow raten Metal seals are used between the diaphragm and the bodyn Stable output pressuren Metal diaphragm ensures output stability and service lifen Multiple outlet pressure rangesn Optional panel installation

R23 series stainless steel pressure reducing valve adopts large area metal diaphragm structure, stable output pressure, high sensitivity, mainly used in medium flow gas system.





n Leakage rate: 1*10-6atm.cc/ SEC He

n CV value: 1.6

n Body: 316 l


n Seat: PTFE/PCTFE

n Other parts: 304


n Maximum inlet pressure: 3500Psi



n Leakage rate: 1*10-6/ ATM.cc/SEC HE

n CV value: 0.15

n Body: 316 l


n Seat: PTFE/PCTFE

n Other parts: 304

R31 series bipolar stainless steel pressure reducing valves

Product features

R23 series bipolar stainless steel pressure reducing valve adopts bipolar pressure reducing diaphragm structure, stable output pressure, suitable for analytical instruments and all kinds of high purity gases.

n Compact structure, metal seal is used between the bipolar decompression structure film and the body

n The change of inlet pressure has very little effect on outlet pressuren The output pressure is stable and accuraten Multiple outlet pressure rangesn Optional panel installation


Pressure reducing valvePressure reducing valve

R44 series high pressure stainless steel pressure reducing valves

Product featuresn Economical, compact structure, high output pressuren Piston design, high safety and reliabilityn Optional panel installation

R44 series stainless steel pressure reducing valve adopts piston type pressure reducing structure, high output pressure, stable pressure, suitable for high pressure occasions

n Inlet and outlet air connection: 1/4"NPT


n Output pressure range: 0-1500 psi,0-2500 psi


n CV value: 0.15

n Body: 316 l


n Seat: PCTFE

n O-ring: Viton

n Other parts: 304

n Air inlet/outlet: 1/2"NPT (3/4"NPT optional)n Maximum inlet pressure: 6,000 psin Output pressure range: 50-1500,50-2500 psin Operating temperature: -40℃ to 74℃n CV value: 1.6n Body: 316 ln The valve core: 316 ln Seat: PCTFEn O-ring: Vitonn Other parts: 304

Features

R46 series high pressure medium flow stainless steel pressure reducer

Product features

R46 series stainless steel pressure reducing valve adopts piston type pressure reducing structure, high output pressure, stable pressure, suitable for high pressure and large flow occasions.

n High input pressure, large outlet flown Piston design, high safety and reliabilityn Balance spool designn Optional panel installation

R48 series high pressure and large flow stainless steel pressure reducers

n High input pressure, large outlet flown Piston design, high safety and reliabilityn Balance spool design

R48 series stainless steel pressure reducing valve adopts piston type pressure reducing structure, high output pressure, stable pressure, suitable for high pressure and large flow occasions.


n Maximum inlet pressure: 6,000 psi

n Output pressure range: 50-1500,50-4000 psi


n CV value: 2.0

n Body: 316 l


n Seat: PCTFE/PEEK

n O-ring: Viton

n Other parts: 304

n Inlet and outlet air connection: 1/4", 1/2"NPT

n Maximum inlet pressure: 50,1000 Psi

n Output pressure range: 0-25,0-50, 0-100kPa


n CV value: 0.15/1.6

n Body: 316 l


n PTFE seat:

n O-ring: NBR/ Viton

n Other parts: 304

R50 series micro pressure stainless steel pressure reducing valves

Product features

R50 series micro pressure stainless steel pressure reducer, with large area diaphragm, suitable for outlet micro pressure adjustment occasions.

n Super large area diaphragmn Low pressure dropn Precise adjustment, adjustable small pressuren Optional panel installationn The inlet end has a precision filter element



Features Features

Product features Product features

Features

R60 series vacuum stainless steel pressure reducing valves

Product featuresn Single stage decompression structuren Body is hard sealed with diaphragm metaln Precise adjustment, adjustable small pressuren Optional panel installationn The inlet end has a precision filter element



n Output pressure range: 30Hg VAC-15psi -30Psi


n CV value: 0.15

n Body: 316 l


n PTFE seat:

n Iris: 316 l

n Other parts: 304

Features

n Air inlet and outlet: 1"NPT


n Output pressure range: 25,50,150Psi


n CV value: 5.0

n Body: 316 l


n Seat: PTFE/VITON

n Iris: 316 l

n Other parts: 304

R66 series high flow stainless steel pressure reducer

Product features

R66 series stainless steel pressure reducer, using large area plastic diaphragm, accurate output pressure, large flow, suitable for gas cleaning and low pressure storage tank and other occasions.

n Large area plastic diaphragmn Low pressure dropn Precise adjustment, large outlet pressure rangen Multiple load options

R68 series large flow stainless steel pressure reducer

Product featuresn Large area plastic diaphragmn Large flown Precise adjustment, large outlet pressure rangen Multiple load optionsn Various inlet and outlet connectors are available

R68 series stainless steel pressure reducer, using a large area plastic diaphragm, accurate output pressure, large flow, suitable for large flow occasions.

Features

n Inlet and outlet air interface: 2" flange, thread, etc


n Output pressure range: 0-50, 0-150 psi


n CV value: 10.0

n Body: 316 l


n Seat: PTFE/VITON

n Other parts: 304

Featuresn Inlet and outlet air connection: 1/4"NPTn Maximum control pressure: 1500Psin Operating temperature: -40℃ to 74℃n CV value: 0.15n Body: 316 ln The valve core: 316 ln Seat: PTFE/VITONn Other parts: 304

R72 series medium pressure piston stainless steel back pressure valves

Product features

R72 series stainless steel back pressure valves, piston type structure, suitable for medium pressure applications.

n Compact structuren Piston constructionn Precise control, large adjustment rangen Optional panel installation



R77 series low pressure diaphragm stainless steel back pressure valves

Product features

n Compact structuren Metal seals are used between the diaphragm and the bodyn Control precisionn Optional panel installation

R77 series stainless steel back pressure valves, diaphragm type structure, accurate control, suitable for low pressure applications.

Features


n Maximum control pressure: 250Psi



n CV value: 0.15

n Body: 316 l

n Seat: PTFE/VITON

n O-ring: Viton

n Other parts: 304

Features

n Maximum intake: 3500Psi

n Switching pressure: 50,150,200 Psi

n Flow coefficient: CV0.15



n The outlet switching pressure can be adjusted according to the customer's requirements before leaving the factory. The panel installation can no longer be adjusted as a standard configuration

ASC series semi-automatic switching system

Product features

ASC series semi-automatic switching system, using the pressure difference set by the pressure reducer to realize the switch of air supply source, suitable for the laboratory air supply system.

n Economy type, compact structure

n Suitable for corrosive and harmful gases

n Panel mounting is standard for easy installation

n Optional shutoff valve, flame arrestor and other accessories

GQ series single side air supply panel

Product features

n A variety of pressures availablen Suitable for corrosive and toxic gasesn On/off valve and drain valve can be selected ball valve

or diaphragm valven Optional safety valve and pressure sensor

Features

n Maximum intake pressure: 500/3500 psi

n Output pressure: 0-50, 0-150,0-250 psi




n Material: the valve body and valve core material are 316L

Features

n Maximum intake pressure: 500Psi

n Output pressure: 0-50, 0-150,0-250 psi




n Material: the valve body and valve core material are 316L

ZD series terminal control panel

Product features

n A variety of pressures available

n Standard on/off ball valve and axial pressure gauge

n On/off valve ball valve or diaphragm valve



Body materialThe interface

size

Encoding rules

S 6 K P R 0.1PA A F N 02

Accessory inlet with

filter device

Pressure regulating valve (from left to right flow type) Back pressure regulating valve (from left to right flow type)

Orifice configuration symbol

Main inlet with filter

Exit

Factory assembled cylinder connectors are located at a main inlet with a filter; The isolation valve is located at the outlet 180° from the cylinder connector.

Gi Inlet pressure gauge

G o Outlet manometer

Configuration

Go/R

Go/R

Gi

G o Gi

G o Gi

R

G o

R

G o Gi

Code A C E F H L K

Configuration

Gi G o

Gi G o

R

Code A B E M N

R Unloading valve

Configuration

Gi

Code A D V

Configuration

Gi

Code A G

Low pressure manual diaphragm valve

Low pressure pneumatic diaphragm valve

High pressure manual diaphragm valve

High pressure pneumatic diaphragm valve

Two-way three-way manual diaphragm valve

Two - way pneumatic diaphragm valve

Encoding rules

81

82

83

84

85

86

87

Super high purity diaphragm valve


Go/R Outlet pressure gauge or unloading valve


S6316

stainless steel

S6L316L

stainless steel

S4304

stainless steel

S4L304L

stainless steel

PR31PR31 bipolar stainless steel

pressure reducing valve

PR44PR44 high pressure stainless steel


PR46PR46 high pressure medium flow stainless steel pressure reducing

valve

PR48PR48 high pressure and large flow stainless steel pressure reducing

valve

PR50PR50 micro pressure stainless steel pressure reducing valve

PR60PR60 vacuum stainless steel


PR66PR66 high flow stainless steel


PR68PR68 large flow stainless steel


ASC Semi-automatic switching system

GQ Single side air supply panel

ZD Terminal control panel

PR72PR72 medium pressure piston

stainless steel back pressure valve

PR77PR77 low pressure diaphragm

stainless steel back pressure valve

A 0 to 2.0psig(0 to 0.13bar)

B 0 to 10psig(0 to 0.684bar)

C 0 to 25psig(0 to 1.7bar)

D 0 to 50psig(0 to 3.4bar)

E 0 to 100psig(0 to 6.8bar)

F 0 to 250psig(0 to 17.2bar)

G 0 to 500psig(0 to 34.4bar)

H 0 to 750psig(0 to 51.6bar)

I 0 to 1000psig(0 to 68.9bar)

J 0 to 1500psig(0 to 103bar)

K 0 to 2000psig(0 to 137bar)

L 0 to 3000psig(0 to 206bar)

M 0 to 3600psig(0 to 248bar)

N 0 to 4000psig(0 to 275bar)

O 10 to 1500psig(0.68 to 103bar)

P 15 to 2500psig(1.0 to 172bar)

Q 25 to 3600psig(1.7 to 248bar)

R 50 to 6000psig(3.4 to 413bar)

S100 to 10000psig(6.8 to

689bar)

0.1P 100psig

0.5P 500psig

1P 1000psig

2P 2000psig

3P 3000psig

6P 6000psig

10P 10000psig

0 Not applicable equals the pressure

control range

See the orifice

configuration in

the figure below

FN

NPT femal

e thread

02 1/4"

No pressu

re gauge

04 1/2"P

Pressure

gauge

Series Pressure control rangeMaximum inlet

pressureOrifice location

The interface type

Pressure gauge

Pressure regulating valve (from right to left flow type) Back pressure regulating valve (from right to left flow type)

Go/R

Go/R

Gi

Gi

Low pressure manual diaphragm valve

The valve body

Technical data

n SUS316L VAR stainless steel double melting material for ultra

high purity applications.

n The inner surface roughness is up to Ra 5 μIn, and the flow

passage can be completely cleaned. The closure area is

minimized. Easy to purge; Maximize traffic.

The diaphragmn The cobalt-based super alloy (UNS R30003) material provides

high strength and corrosion resistance.

n Optimal design, long service life.

The seatn The fully enclosed seat design has the following advantages:

n Excellent anti-expansion and anti-pollution capability;

Improved helium leak testing performance; Rarely produces

particles; Long service life.

n High clean assembly and packaging for high purity

semiconductor industries.

n Every product leaves the factory tested for helium.

Low pressure pneumatic diaphragm valve


The valve body

Technical data

n SUS316L VAR stainless steel double melting material for

ultra high purity applications.

n The inner surface roughness is up to Ra 5 μIn, and the flow

passage can be completely cleaned. The closure area is

minimized. Easy to purge; Maximize traffic.

The diaphragm

n The cobalt-based super alloy (UNS R30003) material provides

high strength and corrosion resistance.


The seat







Super high purity diaphragm valve Super high purity diaphragm valve

The main specifications

Termination specifications 1/4” 3/8, 1/2” 3/4”

Flow coefficient (CV) 0.27 0.7 1.7

Maximum service pressure 300pisg(20.6bar)

Working temperaturePCTFE -40℃-80℃(-40°F-80°F)

PEA, Vespel -26℃-177℃(-15°F-350°F)

The leakage rate of The valve body 1x10-9 sccs He


Product level

Level BA EP SEP

The Valve Body Material SS 316L SS 316L VAR

Inner surface roughness Ra 10μin Ra 5μin

Grinding Mechanical lapping Electrolytic grinding

Cleaning Degreasing cleaning + precision cleaning

Packaging A single layer Double

Product material

The valve body SS 316L/A479, SS316L / VAR/SEMI F20-0305

The diaphragm Cobalt-based superalloy/UNS R30003

The seat PCTFE, PFA, Vespel


Termination specifications 1/4” 3/8, 1/2” 3/4”

Flow coefficient (CV) 0.27 0.7 1.7

Maximum service pressure 300pisg(20.6bar)


PEA, Vespel -26℃-177℃(-15°F-350°F)

The leakage rate of The valve body 1x10-9sccsHe

The leakage rate of The valve body 1x10-9sccsHe

Product level

Level BA EP SEP




Cleaning Degreasing cleaning + Precision cleaning


Product material




High pressure manual diaphragm valve

The valve body

Technical data

n SUS316L VAR stainless steel double melting material for

ultra high purity applications.

n The inner surface roughness is up to Ra 5 μIn, and the

flow passage can be completely cleaned. The closure area

is minimized. Easy to purge; Maximize traffic.

The diaphragm

n The cobalt-based super alloy (UNS R30003) material

provides high strength and corrosion resistance.


The seat







High pressure pneumatic diaphragm valve


The valve body

Technical data

n SUS316L VAR stainless steel double melting material

for ultra high purity applications.

n The inner surface roughness is up to Ra 5 μIn, and

the flow passage can be completely cleaned. The

closure area is minimized. Easy to purge; Maximize

traffic.

The diaphragm

n The cobalt-based super alloy (UNS R30003) material

provides high strength and corrosion resistance.


The seat









Termination specifications 1/4”

Flow coefficient (CV) 0.27

Maximum service pressure 300pisg(207bar)


PEA, Vespel -26℃-177℃(-15°F-350°F)



Product level

Level BA EP SEP






Product material





Termination specifications 1/4”

Flow coefficient (CV) 0.27

Maximum service pressure 300pisg(206bar)


PEA, Vespel -26℃-177℃(-15°F-350°F)

Valve body leakage rate 1x10-9 sccs He

Body leakage rate 1x10-9 sccs He

Product level

Level BA EP SEP

The valve body material SS 316L SS 316L VAR





Product material


The diaphragm Cobalt-based super alloy / UNS R30003


Two-way three-way manual diaphragm valve

The valve bodyn 316L Vim-Var Stainless Steel The Valve Body material for

ultra-high purity applications.n The inner surface roughness can reach Ra 5 μIn, and the flow

passage can be cleaned completely.n The two LD or HD series The Diaphragm is combined into one

with a common flow path to maximize.n Minimized dead zone, and excellent degassing.n While maintaining the basic performance of the original valve,

through the same or different combinations.n The most compact piping system can be designed.n You can choose the most suitable flow system, piping

configuration and joint type according to piping layout.n Can design and manufacture three or more special

specifications of The multi-diaphragm valve

The diaphragm

n The cobalt-based super alloy (UNS R30003) material provides high strength and corrosion resistance.

n Optimal design, long service life

The seat

n Excellent anti-expansion and anti-pollution capability; Improved helium leak testing performance; Rarely produces particles; Long service life.

n High clean assembly and packaging for high purity semiconductor industries.


The two - way pneumatic diaphragm valve


The valve bodyn 316L Vim-Var Stainless Steel The Valve Body material for

ultra-high purity applications.

n The inner surface roughness can reach Ra 5 μIn, and the flow passage can be cleaned completely.

n The two LD or HD series The Diaphragm is combined into one with a common flow path to maximize.

n Minimized dead zone, and excellent degassing.

n While maintaining the basic performance of the original valve, through the same or different combinations.

n The most compact piping system can be designed.

n You can choose the most suitable flow system, piping configuration and joint type according to piping layout.

n Can design and manufacture three or more special specifications of The multi-diaphragm valve.

The diaphragm

n The cobalt-based super alloy (UNS R30003) material provides high strength and corrosion resistance.


The seat

n Excellent anti-expansion and anti-pollution capability; Improved helium leak testing performance; Rarely produces particles; Long service life.

n High clean assembly and packaging for high purity semiconductor industries.


Technical data Technical data



Termination specifications 1/4” 3/8”,1/2”

Flow coefficient (CV) 0.22 0.7

Maximum service pressure Low pressure: 300pisg(20.7bar); High pressure: 3000 pisg (207 bar)


PEA, Vespel -26℃-177℃(-15°F-350°F)



Product level

Level BA EP SEP






Product material


The diaphragm Cobalt-based super alloy / UNS R30003



Termination specifications 1/4” 3/8”,1/2”

Flow coefficient (CV) 0.22 0.7

Maximum service pressure Low pressure: 300pisg(20.7bar); High pressure: 3000 pisg (207 bar)


PEA, Vespel -26℃-177℃(-15°F-350°F)



Product level

Level BA EP SEP






Product material


The diaphragm Cobalt-based super alloy/ UNS R30003


One-piece ball valve, two-piece ball valve

One-piece ball valve

Three-piece bar ball valve

Three-piece cast ball valve

Trunnion type ball valve

Switch ball valves (4 and 6) (5 and 7)

Encoding rules

81

82-83

84

85

86

87

88

Ball valve

The interface sizeBody material

Encoding rules

S 6 L D S O DB 02

The seat material

C

Pneumatic valve selection


Super high purity diaphragm valve

S6316 stainless

steelLDS

Low pressure manual diaphragm

valveB

The pass-through OD

The double card set 02 1/4" C PCTFE C

Normally closed

S6L316L

stainless steel

LDQLow pressure

pneumatic diaphragm valve

L Angle TBTUBE pipe butt welding 03 3/8" A PFA O Normally open

HDSHigh pressure

manual diaphragm valve

V Vertical VCR VCR pin 04 1/2" VS VespelManual valve is not selected

HDQHigh pressure

pneumatic diaphragm valve

H The level of FVCRVCR female

thread 06 3/4"

B23STwo-way three-way manual diaphragm

valve

V and H are B23S and B23Q options

B23QTwo - way pneumatic

diaphragm valve

TypeDirection of connection

The interface type

n Strong flow capacity, fast switching speed

n The medium is allowed to flow in both directions

n Uniform operation resistance, small torque, easy to operate

n Handle color optional


One-piece female thread ball valve

S 6 - B V 1 - F N 0 2 - 4 - 1 P



n Strong flow capacity, fast switching speed

n The medium is allowed to flow in both directions

n Uniform operation resistance, small torque, easy to operate

n Handle color optional

Two-piece ball valve

Two-piece female thread ball valve

Two-piece ball valve with male thread

Two - piece male * female thread ball valve

S 6 - B V 2 - F N 0 2 - 4 - 1 P

S 6 - B V 2 - M N 0 2 - 4 - 1 P

S 6 - B V 2 - M N 0 2 -F N 0 2 - 4 - 1 P



n Working pressure up to 3000 psig (206 bar)

n Temperature range from -- 53 to 148°C (-- 65 to 300°F)n Top design, no need to remove the valve from the pipeline to replace the integrated club

n A variety of handle colors available

n Available in stainless steel, brass and alloy

n 1/16 to 3/4 in. And 3 to 12 mm end

One-piece straight through ball valve with bayonet

One-piece straight through female threaded ball valve

One-piece ball valve with straight male thread

All-in-one ball valve with straight sleeve and male thread

S 6 - B V 5 - O D 0 4 - 4 - 3 P

S 6 - B V 5 - F N 0 2 - 4 - 3 P

S 6 - B V 5 - M N 0 4 - 4 - 3 P

S 6 - B V 5 - O D 0 4 -M N 0 4 - 4 - 3 P

Straight-through type Angle Middle closed position





Ball valve Ball valve

Open Close

Open Close

Open Close Open



All-in-one Angle jacketing ball valve with positive thread

All-in-one three-way ball valve with male thread * jacketing

All-in-one VCR ball valve

One-piece angular jacketed ball valve

One-piece angular female thread ball valve

One-piece three-way jacketed ball valve

One-piece three-way female threaded ball valve

All-in-one three-way VCR ball valve

S 6 - B V 5 - V C R 0 4 - 4 - 3 P

S 6 - B V L 5 - O D 0 4 - 4 - 3 P

S 6 - B V L 5 - F N 0 4 - 4 - 3 P

S 6 - B V L 5 - M N 0 2 -O D 0 2 - 4 - 3 P

S 6 - B V T 5 - O D 0 4 - 4 - 3 P

S 6 - B V T 5 - F R 0 4 - 4 - 3 P

S 6 - B V T 5 - M R 0 4 -O D 0 4 - 4 - 3 P

S 6 - B V T 5 - V C R 0 4 - 4 - 3 P


n Use compact design to provide high flow capacity

n Panel installation


Three-piece bar-type jacketing through ball valve

Three - piece bar card - sleeve Angle ball valve

Three-piece type ball valve with bar sleeve

Pneumatic three-piece ball valve

S 6 - B V 3 - O D 0 4 - 6 P

S 6 - B V L 3 - O D 0 4 - 6 P

S 6 - B V T 3 - O D 0 4 - 6 P

S 6 - Q D B V 3 - O D 0 4 - 6 P





Trunnion type jacketing through ball valve

Trunnion type female thread through ball valve

Trunnion type jacketed ball valve

Trunnion type female thread tee ball valve

S6-BV6-OD02-2.4-6P

S6-BV6-FN02-2.4-6P

S 6 - B V 6 - F N 0 2 - O D 0 2 - 4 - 6 P

S 6 - B V 6 - F N 0 2 - F N 0 3 - 4 - 6 P

The product selectionThe product selection



n Use compact design to provide high flow capacity

n Panel installation

Trunnion type ball valve

n 1/4 turn operation

n Stainless steel, carbon steel, brass and

special alloys

n A wide variety of The seat materials

n 1/8 to 2 in. And 6 to 25 mm in diameter for

various ends

n Alternative discharge outlets

Three-piece cast ball valve

S 6 - B V 4 - O D 0 8 - 1 0 - 3 P

S 6 - B V 4 - F N 0 8 - 1 0 - 3 P

S 6 - B V 4 - M N 0 8 - 1 0 - 3 P

S 6 - B V 4 - T S 0 8 - 1 0 - 3 P

S 6 - B V 4 - T B 0 8

S 6 - B V 4 - K 0 8 - 1 0 - 3 P

Three-piece cast jacketed ball valve

Three-piece cast female thread ball valve

Three-piece casting ball valve with positive thread

Three-piece cast socket welded ball valve

Three-piece cast butt-welded ball valve

Three-piece cast sanitary clamp ball valve




Body material Series Entry/Exit types PressureSize The handle type

Encoding rules

S 6 B V 3 02O D 3 P4

4through the valve

5through the valve

6through the valve

7through the valve

S6-BV7-4-FN02-2.4-3P

S6-BV7-5-FN02-2.4-3P

S6-BV7-6-FN02-2.4-3P

S6-BV7-7-FN02-2.4-3P



n The box-shaped seat packing allows

crossover between two or three

injection flows

n Machined stopper can position the

orifice correctly

Switching ball valves (4-way and 6-way)

n Boxed The Seat Packing allows

reliable switching.

n The flow can be switched from single

inlet to multiple outlet, or from

multiple inlet to universal outlet.

n Spring bearing pin for accurate

orifice positioning

Switching ball valves (5 and 7 way)

4through the valve 6through the valve

5through the valve 7through the valve



S6316 stainless

steelBV1

One-piece ball valve OD

The double card set 01 1/8" 2.4 2.4mm 1P 1000psig A word handle

S6L316L stainless

steelBV2

Two-piece ball valve MN NPT male 02 1/4" 3.2 3.2mm 2P 2000psig D

Butterfly handle

S4304 stainless

steelBV3

Three-piece bar ball valve FN

NPT female thread 03 3/8" 4 4mm 3P 3000psig

S4L304L stainless

steelBVL3

Three-piece bar Angle ball valve MR PT pin 04 1/2" 5 5mm 6P 6000psig

B Brass BVT3Three-piece ball valve with bar

materialFR

PT female thread 06 3/4" 10 10mm

BV4Three-piece cast

ball valve M Metric thread 08 1"

BV5One-piece

through ball valve

TBTUBE pipe butt

weldingL11 1-1/8"

BVL5One-piece

angular ball valve

TSTUBE pipe welding

L12 1-1/4"

BVT5One-piece three-

way ball valve PBPIPE PIPE butt

weldingL14 1-1/2"

BV6Trunnion type

ball valve PSPIPE PIPE welding

L2 2"

BV7-4BV7-4 4-way

switch ball valve K Health clamp 6 to 50 Metric size:

6mm-50mmBV7-5

BV7-5 5-way switch ball valve VCR Metal gasket

end face sealing jointBV7-6

BV7-6 6-way switch ball valve

BV7-7BV7-7 7-way

switch ball valve

Inlet/Exit dimensions

Forged card sleeve through needle valve

Forged female thread through needle valve

Forged straight through needle valve with male thread

Forged male thread * female thread through needle valve

Forged male thread * sleeve through needle valve

Forged card sleeve Angle needle valve

Forged female thread Angle needle valve

Forging male thread * female thread Angle needle valve

S 6 - N V 1 - O D 0 2 - 4 A - 3 P - C

S 6 - N V 1 - F N 0 2 - 4 A - 3 P - C

S 6 - N V 1 - M N 0 2 - 4 A - 3 P - C

S 6 - N V 1 - M N 0 2 - F N 0 2 - 4 A - 3 P - C

S 6 - N V 1 - M N 0 2 - O D 0 2 - 4 A - 3 P - C

S 6 - N V L 1 - O D 0 2 - 4 A - 3 P - C

S 6 - N V L 1 - F N 0 2 - 4 A - 3 P - C

S 6 - N V L 1 - M N 0 2 - F N 0 2 - 4 A - 3 P - C

The product selectionExamples of coding selection Appearance of the form

Forged needle valve NV1

n Integral forging of The valve bodyn Disc spring automatic compensation packing

sealing systemn Packing nut facilitates external adjustmentn A variety of color handles available

n Compact structuren Panel mountablen Each valve is sealed with nitrogen or

compressed air at rated working pressure before delivery

Forged needle valve NV1

Square body needle valve NV2

Harsh environment needle valve NV3

Encoding rules

90

91

92

93

Needle valve


Needle valve

Square sleeve through needle valve

Square body female thread through needle valve

Square male thread * female thread through needle valve

Square butt welding through needle valve

Square body insert welding through needle valve

Square body live butt welding through needle valve

S 6 - N V 2 - O D 0 2 - 4 A - 6 P

S 6 - N V 2 - F N 0 2 - 4 A - 6 P

S 6 - N V 2 - M N 0 2 - F N 0 2 - 4 A - 6 P

S 6 - N V 2 - T B 0 4 - 4 A - 6 P

S 6 - N V 2 - T S 0 4 - 4 A - 6 P

S 6 - N V 2 - H J H 0 4 - 4 A - 6 P



n Stainless Steel 414bar (6000psig)n Alloy C-276:414bar (6000psig)n Alloy 400:345 bar (5000psig)n Titanium: 241bar (3500psig)n Brass: 207bar (3000psig)

Square body needle valve NV2

n PTFE packing: -54℃ to 232℃ (-65℉ to 450℉)n Peek: -54℃ to 260℃ (-65℉ to 500℉)n Graphite filler: -54℃ to 649℃ (-65℉ to 1200℉）

n Cold pull square bar The valve bodyn Two-cut stem design, upper stem thread by rolling hardening treatment, lower stem surface by special

hardening treatmentn The grease on the upper stem thread is isolated from the system mediumn The non-rotating lower stem moves up and down instead of The rotary lift, reducing wear on The packing with

each stroke and reducing friction between The seat and The valve headn The valve has a back seal function in the fully open positionn Panel mountablen The handle adopts both ends screw lock, stable and durablen A variety of color handles availablen Each valve has been tested for sealing with nitrogen or compressed air at rated working pressure before

delivery

Harsh environment needle valve NV3

n Integral forging of The valve bodyn Two stem design, upper stem thread by rolling hardening treatment, lower stem surface by special

hardening treatmentn Combined bonnet design prevents accidental valve disintegrationn The grease on the upper stem thread is isolated from the system mediumn The non-rotating lower stem moves up and down instead of rotating up and down. Reduce wear on

packing per stroke. Reduce friction between The seat and The valve headn The valve has a back seal function in the fully open positionn Panel installationn The handle adopts both ends screw locking, stable and durablen A variety of color handles availablen Each valve is sealed with nitrogen or compressed air at rated working pressure (NU series) or water

at 1.1 times rated working pressure (NUH series) before delivery

Straight through card sleeve valve for harsh conditions

Straight female threaded needle valve for harsh conditions

Straight-through male * female needle valve for harsh environments

Straight through needle insert welding valve for harsh conditions

S 6 - N V 3 - O D 0 2 - 4 A - 6 P

S 6 - N V 3 - F N 0 2 - 4 A - 6 P

S 6 - N V 3 - M N 0 2 - F N 0 2 - 4 A - 6 P

S 6 - N V 3 - T S 0 2 - 4 A - 6 P

The product selectionThe product name Examples of coding selection Appearance of the form


Needle valve Needle valve

Working pressure can be reached Working temperature

Entry/Exit typesBody material Series PressureSize

Encoding rules

S 6 N V 1 O D 04 4 A C3 P

The handle type

Globe valve GL1, GL2

Encoding rules

95

95

Globe valve (wrought steel)


Needle valve

S6316

stainless steel

NV1Forged through needle valve

ODThe double card set

005 1/6" 2.4 2.4mm A Conical 1P1000psig

Stainless steel face handle

S6L316L

stainless steel

NVL1Forged Angle Needle Valve

MN NPT male 01 1/8" 3.2 3.2mm BThe regulator

pointed2P

2000psig

CBlack nylon

round handle

S4304

stainless steel

NV2The valve body acupuncture

FNNPT female thread

015 3/16" 4 4mm CBall valve, pointed

3P3000psig

S4L304L

stainless steel

NV3Needle valves for harsh

environmentsMR PT pin 02 1/4" 5 5mm D Soft valve tip 6P

6000psig

B Brass FRPT female thread

025 5/16" 10 10mm

S1321

stainless steel

M Metric thread 03 3/8"

A20 Alloy 20 TBTUBE pipe

butt welding04 1/2"

M Alloy 400 TSTUBE pipe welding

05 5/8"

INC Alloy 600 PBPIPE PIPE

butt welding06 3/4"

A65 Alloy 625 PSPIPE PIPE welding

07 7/8"

HCC276 alloy

K Health clamp 08 1"

VCR

Metal gasket end face

sealing jointL11 1-1/8"

HJHArticulated butt welding

L12 1-1/4"

L14 1-1/2"

L2 2"

2-50Metric

size: 2mm-50mm

Other expressions: M teeth: M5*0.8 UN teeth: 5/16"-24

Inlet/Exit dimensions

Valve head type

n Integrated forging of The valve body bonnet, no leakage point, no need to

cut off The welding seam at The joint of The traditional valve body

bonnet

n Operating Temperature: -20 ° F to 1250 ° F (-28 ° C to 676 ° C)n 65°Y design reduces pressure lossn All working parts can be taken out in one step, easy maintenance

n Non-rotating stem design, vertical rise instead of spiral rise reduces

packing wear

n Double upper and lower guide design of valve stem ensures alignment of

valve stem and The seat at high flow rate, reliable sealing and long

service life

n Staili stem and The SEAT and upper seal can work in harsh conditions for

a long time

n Precision machined stem and packing box up to 8Ra

n Fully enclosed bearing structure ensures low operating torque

n Handwheel design with protruding, operation is not skid

Globe valve GL1

n Separate design of The valve body and bonnet, OS&Y structure

n Operating Temperature: -20 ° F to 1250 ° F (-28 ° C to 676 ° C)n Stem adopts guide design to ensure The alignment of The stem and

The seat at high flow rate, reliable sealing and long service

life

n High precision machining stem and valve head, switch sensitive

n High finish of seasoning box and valve stem, reliable sealing of

pre-tight packing

n Two pieces self versus gran

Globe va lves - GL2

Body material Type

Encoding rules

S 6

G L 2 1500#

The interface type

F N 08

Pressure rating ASME CLASS

Table valve

Instrument valve group

Two groups of valve

Three groups of valve

Five groups of valve

Encoding rules

97

98

99

100

101-102

102

Table valve, instrument valve group


Globe valve (wrought steel)

S6 316 stainless steel GL1 Globe valve GL1 FN NPT female thread 03 3/8" 1500# Class1500

S6L 316L stainless steel GL2 Globe valve GL2 FR PT female thread 04 1/2" 2500# Class2500

S4 304 stainless steel TB TUBE pipe butt welding 06 3/4" 4500# Class4500

S1 321 stainless steel TS TUBE pipe welding 08 1"

PB PIPE PIPE butt welding L12 1-1/4"

PS PIPE PIPE welding L14 1-1/2"

L2 2"

9 to 50 Metric size: 9mm to 50mm

The interface size

S 6 - G V - R 1 - M N 0 4

- F N 0 4 - F N 0 4 P - T1/2"NPT Female thread 1/2"NPTFemale thread 1/2"NPTFemale thread

S 6 - G V - R 2 - M N 0 4

- F N 0 4 - F N 0 4 P - T1/2"NPT Female thread 1/2"NPTFemale thread 1/2"NPTFemale thread

InstrumentThe process interface

Plug

Isolation valve

Test/Release

InstrumentThe process interface

Plug

Isolation valve

Test/Release

n Non-rotating lower stem, ball head and plug head design

n A variety of The seat and sealing materials are available

n The valve has a back seal function in the fully open position

n Stem thread rolling forming, good mechanical properties

n The grease on the upper stem thread is isolated from the system medium

n Packing can be externally adjusted

n Bonnet with anti-loose screw

n Low torque T handle

n A variety of color handles available

n The handle adopts both ends screw tightening, stable and durable

n Operating pressure up to 404 bar (6000psig)

n PTFE packing: -54℃ to 232℃ (-65℉ to 450℉)

n Graphite packing: -54℃ to 649℃ (-65℉ to 1200℉

Table valve

S 6 - V M 2 - R 2 - F N 0 4- F N 0 4 - F N 0 2 V - T

1/2"NPTfemale thread



S 6 - V M 2 - R 1 - F N 0 4- F N 0 4 - F N 0 2 V - T




Instrument

Bleach/bleed valve

Isolation valve

PT

The process interface

Instrument valve group

n Inner diameter: 0.157in. (6000psig)

n Double stem design, upper stem thread by rolling hardening treatment, lower stem surface by

special hardening

n The upper stem road Vaughan's grease is isolated from the system medium

n The non-rotating lower stem moves up and down instead of The threaded lift, reducing friction on

The packing with each stroke and reducing wear between The seat and The valve head

n The valve has a back seal function in the fully open position

n The handle adopts both ends screw locking, stable and durable

n Operating pressure up to 404 bar (6000psig)

n PTFE packing: -54℃ to 232℃ (-65℉ to 450℉)

n Graphite Filler: -54℃ to 649℃ (-65℉ to 1200℉)

Bleach/bleed valve

Isolation valve

P T


P T

Bleach/bleed valve

Isolation valve



The product selection Code selection Import/process interface Export/instrument interface Test port/drain port

Product selection - two sets of valves

Table valve, instrument valve group Table valve, instrument valve group

S6-VM2-GRV-MN02-FN02-FN02V-T 1/4"NPTpin 1/4"NPTfemale thread 1/4"NPTfemale thread



S6-VM2-GRV-MN06--FN06-FN02V-T 3/4"NPTpin 3/4"NPTfemale thread 1/4"NPTfemale thread

Code selection Import/process interface Export/instrument interface Test port/drain port

Instrument

Instrument

S 6 - V M 2 - R 4 - F N 0 4

- F L - F N 0 2 V - T

S 6 - V M 2 - R 3 - F N 0 4

- F L - F N 0 2 V - T

S 6 - V M 2 - T - F N 0 4

- F L - F N 0 2 V - T

Instrument

Bleach/bleed valve

Isolation valve

PT


Instrument

Bleach/bleed valve


S 6 - V M 3 - R 1 - F N 0 4

- F N 0 4 - F N 0 2 V - T

S 6 - V M 3 - R 2 - F N 0 4

- F L - F N 0 2 V - T

Bleach/bleed valve

Isolation valve

P T


Isolation valve

Isolation valve

Plug Plug

Balancing valve

Instrument

D P

Isolation valve

「

「



The flange

The flange




Code selection Import/The process interface Export/instrument interface Test port/drain port

The product selection-Two groups of valve


The flange


The flange


There is no


The flange There is no


The flange1/4"NPTfemale thread


The product selection-Three groups of valve

Isolation valve

Isolation valve

Plug Plug

Balancing valve

Instrument

D P


「

「

Isolation valve Plug

DP Instrument


S 6 - V M 3 - H - F L - F L - T

S 6 - V M 3 - R 3

- F N 0 4 - F L - T

S 6 - V M 3 - R 4 - F N 0 4

- F L - F N 0 2 V - T

Isolation valve

Isolation valve

Balancing valve

Instrument

D P


「

「

Isolation valve

Isolation valve

Instrument

D P




PT

Instrument

Balancing valve



Balancing valve


The flange

Code selection Import/The process interface Export/instrument interface Test port/drain port

Body material SeriesDimensions of sewage outlet

Encoding rules

Valve group type

S 6 V M 2 R 1 F N 04 02 TV

Packing/sealing material

S 6 - V M 5 - R 1 - F N 0 4

- F N 0 4 - F N 0 2 V - T

S 6 - V M 5 - T - F N 0 4

- F L - F N 0 2 V - T

S 6 - V M 5 - H - F L

- F L - F N 0 2 V - T

S 6 - V M 5 - R 2 - F N 0 4

- F L - F N 0 2 V - T

Isolation valve

Test/bleed valve Test/bleed valve

Isolation valve

Balancing valve

Instrument

D P


Isolation valve

Test/bleed valve



Discharge port

Test/bleed valve

Isolation valve

Balancing valve

Instrument D P

Discharge port D P


Balancing valveIsolation valve

Instrument

D P


S 6 - V M 5 - R 3 - F N 0 4

- F N 0 4 - F N 0 2 V - T


Balancing valve

Isolation valve

Instrument

D P



The flange

The flange

The flange



1/2"NPTfemale thread The flange1/4"NPTfemale thread

1/2"NPTfemale thread 1/2"NPTfemale thread1/4"NPTfemale thread


The product selection-Five groups of valve

1/2 "TUBE pipe welding The flange1/4"NPTfemale thread


The product selection-Five groups of valve

S 6 - V M 5 - R 4 - F N 0 4

- F L - F N 0 2 V - T

S 6 - V M 5 - R 5 - T S 0 4

- F L - F N 0 2 V - T

Isolation valve

Plug Plug

Isolation valve

Balancing valve

Instrument

D P



Instrument

Balancing valve

Isolation valve

DP




S6316 stainless

steelGV Table valve GRV MN NPT male 4 1/2" FN 02 1/4" V Outlet T PIPE

S6L316L

stainless steel

VM2 Two valve group R1 FNNPT female thread

Connected with the transmitter, the flange can be

directly indicated by FL, without

marking the flange size

04 1/2" P With a plug G Graphite

S4304 stainless

steelVM3 Three valve group R2 MR PT pin XF Relief valve

S4L304L

stainless steel

VM5 Five valve group R3 FRPT female thread

R4 FL The flange

R5

T

H

Entry/Exit typesInlet/Exit dimensions

Type of outlet

F N

V

1/2"NPTfemale thread 1/2"NPTfemale thread1/4"NPTfemale thread

1/2"NPTfemale thread The flange1/4"NPTfemale thread

Instrument

Plug

Plug



Isolation valve

Isolation valve

Balancing valve

Balancing valve

Test/bleed valve

n Pressure and volume refer to ASME B16.34n The controller color has functional zoningn The structure of ball valve and needle valven Material traceabilityn Each valve is factory tested in accordance

with EN 12266 or API STD 598

n Flange ports are available according to ASME B16.5, EN 1092-1

n Drain outlet with plugn It saves weight, space and cost compared to

traditional design

Isolate the release valve set


D B B v a l v e g r o u p

DB valve set - single The flange single release valve set

DB valve set - single The flange double isolation release valve set

A tube valve

Encoding rules

104

105

106-107

108

109-110

110



n Maximum pressure level: Class2500n Operating temperature: -54℃ to 232℃ (-65℉ to 450℉ )n Quarter turn open and close operationn The pointing type locator block shows the open or closed

positionn Bottom loaded stem design prevents stem from running out and

improves system safetyn High strength stem bearing support provides smooth opening

and closing and eliminates friction between The stem and The valve body

n The valve may need to be adjusted for packing during servicen SMYTIK ball valves are designed for use in fully open or fully

closed positions

n Maximum pressure level: Class4500n Operating temperature: PTFE packing: -54 ° C to 232 ° C (-

65 ° F to 450 ° F) Graphite packing: -54 ° C to 649 ° C (-65 ° F to 1200 ° F)

n Two stem design: upper stem thread by rolling hardening treatment, lower stem surface by special hardening

n The grease on the upper stem thread is isolated from the system medium

n The non-rotating lower valve stem moves up and down instead of The rotating lift, avoiding The friction between The SEAT sealing surface and The valve head.

n The friction between the lower stem and packing is greatly reduced

n The valve stem has a back seal function in the fully open position

n The handle adopts both ends screw locking, stable and durable

n Maximum pressure level: Class4500n Operating temperature: PTFE packing: -54℃ to 232℃ (-65℉

to 450℉ )n Graphite Filler: -54℃ to 649℃ (-65℉ to 1200℉ )n Two stem design: upper stem thread by rolling hardening

treatment, lower stem surface by special hardeningn The grease on the upper stem thread is isolated from the

system mediumn The non-rotating lower valve stem moves up and down

instead of The rotating lift, avoiding The friction between The SEAT sealing surface and The valve head.

n The friction between the lower stem and packing is greatly reduced

n The bonnet is bolted for good strength and reliabilityn The stem has a back seal function and prevents the stem from

being blown out by medium pressuren Adjustable packing gland facilitates adjustment of packing

gland to form an effective sealn One-piece forged bonnet bracket provides high strength and a

fully concentric stemn Two screws are used to lock the handle, which is strong and

durable


Ball valve features

Needle valve features

OS

&Y needle type structure

Stainless steel handle

Blowout proof stem

Lock nut

Stop pin

Stem packing

Stem bearing

The seat

The ball

The packing gland

Lock nut

Packing gland ring

The valve stem

On the valve stem

Lock nut

The bonnet

Packing

Stop pin

Lock screw

Hydraulic threaded valve stem

Adjustable flange gland

Packing gland ring

Back seal design

Aluminum oxide handle

Bolted bonnet

Non-rotating down stem

Yoke shape bracket



Exit

Discharge port


Exit

Discharge port


Exit


Exit

Discharge port


Exit

Discharge port

DBB valve groupn Threaded port connection or

all-in-one forging The valve body

n Process and instrument pipelines are combined on The same valve body

n 1/2 NPTFEMALE THREAD standard discharge port

S6-DBB-BN9.5-FLL2RF300#

- F N 0 4 - F N 0 2 P - TThe flange2"RF

C L A S S 300


The flange2"RF

C L A S S 300

The flange2"RF

C L A S S 3001/4"NPTfemale

thread

S6-DBB-BN9.5-FLL2RF300#

- F N 0 2 P - T

The flange2"RF

C L A S S 300

1/2"NPT female thread

The flange2"RF

C L A S S 300

The flange2"RF


thread

S6-DBB-BB9.5-FLL2RF300#

- F N 0 4 - F N 0 2 P - T

S6-DBB-BB9.5-FLL2RF300#

- F N 0 2 P - T

The flange2"R

C L A S S 300



S6-DBB-BNB9.5-FLL2RF300#

- F N 0 4 - F N 0 2 P - T

The flange2"RF

C L A S S 300

The flange2"RF


thread

S6-DBB-BNB9.5-FLL2RF300#

- F N 0 2 P - T



Exit


Exit

Discharge Vport

The process interface Exit

Discharge port

Discharge port

The process interface Exit

Discharge port


The flange2"RF

C L A S S 300

S 6 - M F 1 - O N 4 - F N 0 4 - F L L 2 R F 3 0 0 #

- F N 0 2 P - T


The flange2"RF

C L A S S 300

S 6 - M F 1 - N N 4 - F N 0 4 - F L L 2 R F 3 0 0 #

- F N 0 2 P - T


The flange2"RF

C L A S S 300

S 6 - M F 2 - O N 4 - F N 0 4 - F L L 2 R F 3 0 0 #

- F N 0 2 P - T




Lower 1/4"NPT

female thread,

Side 1/4"NPT

female thread

Lower 1/4"NPT

female thread,

Side 1/2"NPT

female thread

The flange2"RF

C L A S S 300

S 6 - M F 2 - N N 4 - F N 0 4 - F L L 2 R F 3 0 0 #

- F N 0 2 - F N 0 4 P - T

DB valve set - single The flange single release valve set口


n Process and instrument pipelines are combined on The same valve body

n 1/2 NPTFEMALE THREAD standard discharge port

n 1/4 NPT Female Thread standard discharge port


Code selection Inlet/process connector Export/instrument interface Test port/drain port



Isolate the release valve set Isolate the release valve set

Exit

Discharge port

Discharge port

Discharge Vport

Discharge Vport

Discharge port


Exit

Discharge port


Exit

Discharge port


Exit

Discharge port


Exit

Discharge port


Exit


Exit


Exit


Exit


The flange2"RF

C L A S S 300

S 6 - M F 5 - O N N 4 - F N 0 4

-FLL2RF300#-FN02P-T


The flange2"RF

C L A S S 300

S 6 - M F 5 - N N N 4 - F N 0 4

-FLL2RF300#-FN02P-T


The flange2"RF

C L A S S 300

S 6 - M F 6 - O N N 4 - F N 0 4

-FLL2RF300#-FN02P-T






There is no

There is no

There is no

There is no The flange2"RF

C L A S S 300

S 6 - M F 6 - N N N 4 - F N 0 4

-FLL2RF300#-FN02P-T

DB Valve Set - Single Flange Double Isolation Relief Valve Set


The flange2"RF

C L A S S 300S 6 - M F 3 - O N 4 - F N 0 4

-FLL2RF300#-T


The flange2"RF

C L A S S 300S 6 - M F 3 - N N 4 - F N 0 4

-FLL2RF300#-T


The flange2"RF

C L A S S 300S 6 - M F 4 - O 4 - F N 0 4

-FLL2RF300#-T


The flange2"RF

C L A S S 300S 6 - M F 4 - N 4 - F N 0 4

-FLL2RF300#-T

DB valve set - single The flange single release valve set口


n Process and instrument lines are combined on the same valve body

n 1/4 NPT female thread standard discharge outlet

n 1/2 NPT female thread standard outlet









Encoding rules

SizeBody material SeriesDimensions of sewage outlet

S 6 D B B 9.5 F N 02 Gp

Type of outlet

Valve group structure Entry/Exit types

B N B FL 04RTJ1500#

A tube valve




S 6 - M F 7 - N 4 - T B 0 4 -F L L 2 R F 3 0 0 # - T

The flange2"RF

C L A S S 300



The flange2"RF

C L A S S 300


S 6 - M F 7 - N 4 - T B 0 4 -F L L 2 R F 3 0 0 # - F N 0 4 P - T


The flange2"RF

C L A S S 300


Tube butt welding 1/2"


There is no

S 6 - M F 7 - N N 4 - T B 0 4 -F L L 2 R F 3 0 0 # - F N 0 2 P - T

S 6 - M F 8 - N 4 - T B 0 4 - F N 0 4 - T



Exit

Discharge port


Exit

Discharge port


Exit


Exit

The flange2"RF C L A S S 300

S 6 - M F 8 - N N 4 - T B 0 4 - F N 0 4 -F N 0 2 P - T

S 6 - M F 8 - N 4 - T B 0 4 - F N 0 4 -F N 0 4 P - T


Discharge port


Exit

Discharge port


Exit





Tube butt welding 1/2"





S6316

stainless steel

DBB BNBall valve + needle valve

S6L316L

stainless steel

MF1 BBBall valve + ball valve

S4304

stainless steel

MF2 ONOS&Y + needle

valve

S4L304L

stainless steel

MF3 NNNeedle valve + needle valve

A350

Low temperature steel 350

MF4 N Needle valve

MF5 O OS&Y

MF6 BNBBall valve + needle valve + ball valve

MF7 ONNOS&Y+ needle valve + needle

valve

MF8 NNNNeedle valve + needle valve + needle valve

6 4mm

6.4 6.4mm

9.5 9.5mm

14 14mm

20 20mm

25.4 25.4mm

38.1 38.1mm

50.8 50.8mm

MN NPTpin

FNNPTfemale thread

MR PTpin

FRPTfemale thread

MThe metric system

FL The flange

TBTUBE pipe butt

welding

TSTUBE pipe welding

PBPIPE PIPE butt

welding

PSPIPE PIPE welding

FN 02 1/4" V Outlet T PIPE

04 1/2" P With a plug G Graphite

XF Relief valve

02 1/4”

025 5/16”

03 3/8"

04 1/2"

05 5/8”

06 3/4"

07 7/8”

08 1"

L11 1-1/8"

L12 1-1/4"

L14 1-1/2"

L2 2"

12 -50Metric size: 12mm

to 50mm

Other expressions :M teeth :M5*0.8 UN teeth: 5/16"-24

Inlet/Exit dimensions PPacking/sealing

material


n The outlet is a ball valven Main circuit size is availablen Maximum working pressure: 68.9 bar (1000 psig)n Operating temperature: -26℃ to 232℃ (-15℉ to 450℉ )）

FPQ2 series

n The outlet is needle valven Main circuit size is availablen Maximum working pressure: 414 bar (6000 psig)n Operating temperature: -26℃ to 232℃ (-15℉ to 450℉ )

Distributor

Encoding rules

Body material series Type of outlet valve

S 6 F P Q 1 04 RF300# B V 1

Entry typeExport quantity

F N 04FL 8 F N 04 B V 1

D i s t r i b u t o r s F P Q 1 , F P Q 2

Encoding rules

112

112

Distributor


n Pressure and volume refer to ASME B16.34n The controller color has functional zoningn The structure of ball valve and needle valven Material traceability

FPQ1 series

Distributor

S6316

stainless steel

FPQ1 FLThe

flange

S6L316L

stainless steel

FPQ2 MN NPT male

S4304

stainless steel

FNNPT

female thread

S4L304L

stainless steel

MR PT pin

FRPT female thread

005 1/6"

01 1/8"

015 3/16"

02 1/4"

025 5/16"

03 3/8"

04 1/2"

05 5/8"

06 3/4"

07 7/8"

08 1"

L11 1-1/8"

L12 1-1/4"

L14 1-1/2"

L2 2"

2-50 Metric size: 2mm-50mm

Other expressions: M teeth: M5*0.8 UN teeth: 5/16"-24 Fran: 1 "RF150 #

4 Same as the

entryBV1


Same as the entry

6

The identification method is the same as the

entry

BV2Two-piece ball valve

The identification method is the same as the

entry8 BV3


12:

BV4Three-piece cast ball valve

:

BV5One-piece ball valve

NV1The forging

of the needle valve

NV2Bar of the needle valve

P Plug

When there is a plug behind the outlet valve, +P behind the above

valve

BV1 One-piece ball valve

BV2 Two-piece ball valve

BV3 Three-piece bar ball valve

BV4 Three-piece cast ball valve

BV5 One-piece through ball valve

NV1The forging of the needle

valve

NV2 Bar of the needle valve

P Plug

FL The flange

MN NPT male

FN NPT female thread

MR PT pin

FR PT female thread

M Metric thread

When there is a plug behind the outlet valve, +P behind the

above valve

The entrance sizeExport type

Export size

Type of discharge outlet

Outlet size

Type of outlet valve

The sampling systemQYA

n In-line liquid phase sampling system with in-line valves is used for representative sampling of low vapor pressure liquids at low pressure.

n Suitable for low vapor pressure (< 0.7bar) representative sampling of corrosive and hazardous liquids

n Sampling from low pressure device or line: 0-10bar (0-145psig)n In-line samplingn Fire prevention, anti-static in - line ball valven Nitrogen purge type is optional

The sampling systemQYB

n In-line liquid phase sampling systems with plunger valves are used for representative sampling of high viscosity or particulate liquids.


n Especially suitable for high viscosity or particulate liquid samplingn Quantitative samplingn Nitrogen purge and solvent cleaning are optionaln Suitable for high temperature applications

The sampling systemQYC

n Quantitative liquid phase sampling system with linkage valve is suitable for low vapor pressure liquid sampling under high or low pressure conditions.


n It is especially suitable for sampling in medium and high pressure equipment or pipeline

n Quantitative samplingn Suitable for high temperature applicationsn Various nitrogen purge types

The sampling systemQYD

T h e s a m p l i n g s y s t e m Q Y A、 Q Y B、 Q Y C、 Q Y D

T h e s a m p l i n g s y s t e m Q Y E、 Q Y F、 Q Y G

114

115

The sampling systemThe eliminator

The sample inlet

The eliminator

PI

Export of samplesNitrogen gas inlet

The eliminator

The sample inlet

Nitrogen gas inlet

The eliminator

PI


n Liquid phase sampling systems with three-way ball valves or in-line needle valves are used for representative sampling of low vapor pressure liquids at low pressures.


n Sampling from low pressure device or line: 0-10bar (0-145psig)n A variety of nitrogen purge options

The sampling system

The sampling systemQYE

n Liquid phase sampling system with linkage valves is used

for representative sampling of low vapor pressure

liquids under vacuum conditions.

n Suitable for low vapor pressure (< 0.7bar)

representative sampling of corrosive and hazardous

liquids

n It is especially suitable for sampling from vacuum, zero

pressure devices or pipelines

n Quantitative sampling

n Various nitrogen purge types

n 6 types available for selection

n A cylinder type sampling system with an interconnected

valve is used for representative sampling of liquefied

gas or high vapor pressure liquids under pipeline

pressure.

n Suitable for corrosive, dangerous liquefied gas or high

vapor pressure liquid sampling

n Limit cylinder sampling by expansion chamber or reserve

volume tube

n Double end off type quick connection, zero volume

leakage

n By-pass nitrogen purge type washable

The sampling systemQYF

n A cylinder type sampling system with an interconnected

valve is used for representative sampling of gas samples

under line pressure.

n Corrosive and dangerous gas sampling

n Double end off type quick connection, zero volume

leakage

n By-pass valve air purge type is optional

The sampling systemQYG

Sample cylinder QYP, Single - ended cylinder, Double - ended cylinder

Encoding rules

117

118

Sampling steel cylinder

PI

The sample inlet

The vacuum interface

Nitrogen gas inlet

The sample inlet

Export of samples

The eliminator

PI

Export of samples

The sample inlet

The eliminator

PI


The sampling system

Sampling cylinder QYP

n The bottle body is made of seamless, with consistent wall thickness,

size and capacity

n Smooth inner neck facilitates cleaning and eliminates residual fluid

n Cold-formed NPT internal threads have greater strength

n Thick-walled ends provide greater strength and prevent flaring

n Fully permeable gas shielded tungsten arc structure can prevent

leakage of samples in the bottle

Single-ended cylinder

n The 150,300 and 500cm3 volumes can meet a variety of sampling needs

n 304L stainless steel structure can withstand intergranular corrosion

Double side cylinder

Single/double ended cylinders

Material 316L S S 316L SS，304L S S 304L S S Alloy 400 316 S S 316 S S

Specification D O T - 3 A 5000 D O T - 3 E 1800 D O T - 3 A 1800 D O T - S P 7 4 5 8 1800 There is no D O T - 4 B 500

The temperature℃(℉)

-53（-65）至37（100） 5000（344） 1800（124） 1800（124） 1800（124） 1000（68.9） 500（34.4）

93（200） 3960（272） 1360（93.7） 1360（93.7） 1580（108） 840（57.8） 500（34.4）

148（300） 3570（245） 1230（84.7） 1230（84.7） 1490（102） 760（52.3） 500（34.4）

204（400） 3290（226） 1130（77.8） 1130（77.8） 1430（98.5） 700（48.2） 500（34.4）

260（500） 3060（210） 1050（72.3） 1050（72.3） 1420（97.8） 650（44.7） 500（34.4）

315（600） 2920（201） 1000（68.9） 1000（68.9） 1420（97.8） 620（42.7） 500（34.4）

343（650） 2870（197） 980（67.5） 980（67.5） 1420（97.8） 610（42.0） 500（34.4）

371（700） 2810（193） 970（66.8） 970（66.8） 1420（97.8） 590（40.6） 500（34.4）

398（750） 2750（189） 950（65.4） 950（65.4） 1410（97.1） 580（39.9） 500（34.4）

426（800） 2700（186） 930（64.0） 930（64.0） - 570（39.2） 500（34.4）

454（850） 2640（181） - - - 560（38.5） -

Encoding rules

Body material Series Internal volume cm3

S 6

Q Y P - S

Port type

F N

150

Port type

02

Classes

1.8P


n Volume from 40 to 3785cm3 (1 gal)

n Working pressure up to 5000psig (344 bar)

n 304L and 316L stainless steels are resistant to intergranular

corrosion

Pressure-temperature ratings

n Single end or double end design

n Corrosion resistant 316 stainless steel construction

n Pressure rating 1000psig (68.9bar)

n Dimensions are available in 10,25 and 50cm3 capacities

n Smooth internal port gradient for easy cleaning

n Volume is strictly controlled

n Full penetration butt-welded construction

Sampling steel cylinder Sampling steel cylinder

S6316 stainless

steelQYP-S

Single ended seamless sampling cylinder

40 OT Card casing 01 1/8" 0.5P 500PSI

S6L316L stainless

steelQYP-D

Double-ended seamless sampling cylinder

50 FN NPT female thread 02 1/4" 1P 1000PSI

S4304 stainless

steelXQYP-S

Single ended small seamless sampling cylinder

75 FR PT female thread 04 1/2" 1.8P 1800PSI

S4L304L stainless

steelXQYP-D

Double-ended small seamless sampling cylinder

150 6-16Metric size: 6mm to 16mm

5P 5000PSI

300

400

500

1000

2250

3785

n The maximum working pressure is 6000psig

n Operating temperature from -65℉ to 850℉ (-53℃ to 454℃)

n 304, 316 stainless steel

n Socket welding in accordance with ASME B16.11

n Butt welding in accordance with ASME B16.9

n NPT thread according to ASME B1.20.1

n Multiple interfaces are available

Condensation container LNQ

Port type

2 A 2 B 3 A

3 B 4 A 4 B

Numbering rules

Body material Type Port type

S 6

L N Q

P1 Port Type

F N2 A 02

P3 and P4 ports

1.8P

Condensation container LNQ

Encoding rules

120

120

Cooling container


Cooling container

S6 316 stainless steel LNQCooling container

2A MN NPT male 01 1/8" 0.5P Same as P1 port

S6L 316L stainless steel 2B FN NPT female thread 02 1/4"

S4 304 stainless steel 3A MR PT pin 04 1/2"

S4L 304L stainless steel 3B FR PT female thread 8-16Metric size: 8mm to 16mm

4A TB TUBE pipe butt welding

4B TS TUBE pipe welding

PB PIPE PIPE butt welding

PS PIPE PIPE welding

P1 Port Size

Selection of the code



Schematic diagram Schematic diagram Schematic diagram

SMYTIK(Kunshan) Precision Machinery Co.,Ltd SMYTIK(Kunshan ...

Documents