SEATTLE MANUFACTURING CORPORATION PRODUCT COMPARISON
SEATTLE MANUFACTURING CORPORATION
PRODUCT COMPARISON
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
1
MINIMUM BREAKING STRENGTH – 3 SIGMA TESTThe minimum Breaking Strength (MBS) of all SMC products are calculated using the 3 Sigma Rating system which indicates that 99.87% of the products tested will break at values above the published MBS. All breaking strengths reported in this product catalog and on SMC equipment are calculated using this method.
PIN TO PIN VS. SYSTEM STRENGTHStandards such as NFPA, ANSI, CE and UIAA prescribe various types of test methods; some of them are intended to test the system strength and others are designed to test the device only. The “system strength” method tests the device as it interacts with rope, webbing or other applicable equipment. The “pin to pin” method tests the device strength only by loading the device between two polished steel pins and slowly pulled to failure.
When comparing device minimum breaking strengths, the user needs to be certain which test methods have been applied as the results can be signi� cantly di� erent from one to the other and o� en misleading. For example, a rescue descender used with lightweight, small diameter rope will have a lower system strength than the same descender used with a heavyweight, larger rope. In addition, the pin to pin method on this same device will provide another MBS altogether. As such, the user can be misinformed if the source and method of testing is not adequately understood.
Many of the standards are written to test the system strength rather than the pin to pin strength. This is important because the system is only as strong as the weakest link and when using the device in the � eld, the user needs this information to make good gear choices for their application. When it is not practical to test in a system due to so many variables or when variables can signi� cantly alter the e� ect of the test, the pin to pin method is used.
MARKING OF STANDARD STRENGTH VS ACTUAL STRENGTHWhen a device is certi� ed to a standard, the minimum breaking strength required to meet the standard is marked on all SMC devices. If the actual breaking strength (still tested per the standard) is signi� cantly greater than the minimum required strength, SMC may also mark the device with the actual strength information. For example, the large rescue carabiner meets the NFPA G rating of 40kN MBS, but the actual MBS is 46kN. SMC marks both of these results on the carabiner.
Please note that SMC does not mark a device with the pin to pin results (which is o� en greater than the system strength) unless it is the method required by the standard. For example, the rescue descender may break at 150% of the rated strength when pulled pin to pin. Per the standards, however, SMC will only mark the more realist, but lower system strength, on the device.
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
2
ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches) WEIGHT GATE OPEN (inches)
MAJOR AXIS
MINOR AXIS OPEN RATING(s)
11803Captive Eye Keeper
Small Stainless
Steel Bright 1.95 x .52
0.15 oz.
4.2g .58 NA NA NA
11804Captive Eye Keeper
Large Stainless
Steel Bright 2.05 x .66
0.17 oz.
4.8g0.67 NA NA NA
170xx Light D Aluminum
Bright (01)Black (02)Purple (03)Orange (04)
Red (05)
3.96 x 2.211.7 oz.
48g0.74
4496 lbf.
20 kN
1798 lbf.
8 kN
1124 lbf.
5 kN–
180xx Mountain D Aluminum
Bright (01)Black (02)Purple (03)Orange (04)
Red (05)
4.37 x 2.562.4 oz.
68g0.95
6070 lbf.
27 kN
1574 lbf.
7 kN
1574 lbf.
7 kN–
185xx Locking D Aluminum
Bright (01)Black (02)Purple (03)Orange (04)
Red (05)
4.37 x 2.562.6 oz.
74g0.82
6070 lbf.
27 kN
1574 lbf.
7 kN
1574 lbf.
7 kN–
190xx Oval Carabiner Aluminum Bright (01)Black (02)
4.26 x 2.212.2 oz.
63g0.71
4496 lbf.
20 kN
1574 lbf.
7 kN
1349 lbf.
6 kN–
250xx Large Aluminum Locking Aluminum Bright (01)Black (02)
5.04 x 2.973.8 oz.
108g1.2
7643 lbf.
34 kN
2473 lbf.
11 kN
2248 lbf.
10 kN–
Aluminum Carabiners
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
3
ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches) WEIGHT GATE OPEN (inches)
MAJOR AXIS
MINOR AXIS OPEN RATING(s)
NFPA1030xx Kinetic Screw Lock Aluminum Blue (00)
Orange (04)Black (07)
4.57 x 2.832.8 oz.
79g0.98
6294 lbf.
28 kN
2023 lbf.
9 kN
1798 lbf.
8 kNNFPA-T
NFPA1031xx Kinetic Twist Lock Aluminum Blue (00)
Orange (04)Black (07)
4.57 x 2.853.2 oz.
91g0.98
6294 lbf.
28 kN
2023 lbf.
9 kN
1798 lbf.
8 kNNFPA-T
NFPA185xx Locking D Aluminum Bright (01)Black (02)Red (05)
4.37 x 2.562.6 oz.
74g0.82
6070 lbf.
27 kN
1574 lbf.
7 kN
1574 lbf.
7 kNNFPA-T
NFPA2055xx Crossover, Screwlock Aluminum Pewter (00)Black (07)
5.53 x 3.345.1 oz.
145g1
8992 lbf.
40 kN
3597 lbf.
16 kN
4046 lbf.
18 kNNFPA-G
NFPA2056xx Crossover, Dual-lock Aluminum Pewter (00)Black (07)
5.53 x 3.355.5 oz.
156g1
8992 lbf.
40 kN
3597 lbf.
16 kN
4046 lbf.
18 kN
NFPA-G
ANSIZ359.1 (07)
NFPA2057xx Crossover, Tri-lock Aluminum Pewter (00)Black (07)
5.53 x 3.355.5 oz.
156g1
8992 lbf.
40 kN
3597 lbf.
16 kN
4046 lbf.
18 kN
NFPA-G
ANSIZ359.1 (07)
NFPA Aluminum Carabiners
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
4
Large Steel Carabiners
ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches) WEIGHT GATE OPEN (inches)
MAJOR AXIS
MINOR AXIS OPEN RATING(s)
240xx Large Stainless Locking Stainless
Steel Bright (01)Black (07)
5.04 x 2.9710.9 oz.
309g1.2
10341 lbf.
46 kN
4046 lbf.
18 kN
2473 lbf.
11 kN–
NFPA20003 X-Large Steel Locking Steel Bright 5.7 x 3.512.2 oz.
346g1.45
12139 lbf.
54 kN
2922 lbf.
13 kN
3147 lbf.
14 kNNFPA-G
NFPA210xx Large Steel Locking Steel Bright (01)Black (07)
5.04 x 2.9710.6 oz.
300g1.2
10341 lbf.
46 kN
3597 lbf.
16 kN
2473 lbf.
11 kNNFPA-G
NFPA21002 Large Heat-Treated Steel Steel Bright 5.04 x 2.9710.6 oz.
300g1.2
14612 lbf.
65 kN
3597 lbf.
16 kN
4046 lbf.
18 kNNFPA-G
NFPA21501 ANSI Safety Lock Steel Bright 5.04 x 2.9711.5 oz.
325g1.2
10341 lbf.
46 kN
3597 lbf.
16 kN
2473 lbf.
11 kN
NFPA-G
ANSI Z359.12 (09)
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
5
Lite Steel Carabiners
ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches) WEIGHT GATE OPEN (inches)
MAJOR AXIS
MINOR AXIS OPEN RATING(s)
1000xx Lite Stainless Lite Stainless
Steel Bright (03)Black (07)
4.52 x 2.766 oz.
170g0.94
7418 lbf.
33 kN
2248 lbf.
10 kN
1798 lbf.
8 kN–
NFPA1000xx Lite Alloy Steel Lite Alloy
Steel Bright (01)Black (07)
4.52 x 2.766.6 oz.
187g0.94
10116 lbf.
45 kN
2697 lbf.
12 kN
2473 lbf.
11 kNNFPA-G
NFPA102100 ANSI FP Lite Alloy Lite Alloy
Steel Bright 4.61 x 2.91
9 oz.
255g1
10116 lbf.
45 kN
3600 lbf.
16 kN
2473 lbf.
11 kN
NFPA-G
ANSI Z359.12 (09)
NFPA102200 Lite Alloy DualGuard Lite Alloy
Steel Bright 4.52 x 2.76
7 oz.
199g0.88
10116 lbf.
45 kN
2697 lbf.
12 kN
2473 lbf.
11 kNNFPA-G
NFPA102300 Lite Alloy TriGuard Lite Alloy
Steel Bright 4.52 x 2.76
7 oz.
199g0.88
10116 lbf.
45 kN
2697 lbf.
12 kN
2473 lbf.
11 kNNFPA-G
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
6
ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches)
THICK (inches) WEIGHT MBS BECKET:
Pin to Pin BEARING TYPE SHEAVE (dia in)
TREAD (dia in)
ROPE(dia mm) RATING
NFPA1305002” SMC/RA
Aluminum Single Aluminum Green 4.6 x 2.5 1.34
6.3 oz.
179g
6070 lbf.
27 kN– Ball Bearing 2 1.48 13 NFPA-T
147000 Swiftwater Aluminum Red/Black 4 x 3 1.3756 oz.
170g
7786 lbf.
34 kN– Ball Bearing 2 1.48 13 –
1573xxCRx
Crevasse Rescue
Aluminum Blue (00)
Orange (03)2.67 x 1.74
1.061.8 oz.
52g
4946 lbf.
22 kN– Delrin 1.2 0.82 13 –
159500TR
Technical Rescue
Aluminum Green 3 x 1.75 1.072.3 oz.
66g
5845 lbf.
26 kN– Oilite Bushing 1.2 0.82 12 –
1596xx JR Pulley Aluminum Blue (00)Black (02)
2.84 x 1.75
1.563.2 oz.
89g
4946 lbf.
22 kN– Delrin 1.2 0.82 9 –
1597xx JRB Pulley Aluminum Blue (00)Black (02)
3.57 x 1.75
1.563.3 oz.
94g
4946 lbf.
22 kN
2298 lbf.
13 kNDelrin 1.2 0.82 9 –
Aluminum Pulleys
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
7
ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches)
THICK (inches) WEIGHT MBS BECKET:
Pin to Pin BEARING TYPE SHEAVE (dia in)
TREAD (dia in)
ROPE(dia mm) RATING
NFPA1527xx2” PMPSingle
Aluminum Green/Black (00)
Black (01)3.97 x 2.9 1.37
6.3 oz.
179g
8093 lbf.
36 kN– Ball Bearing 2 1.48 13 NFPA-G
NFPA1528xx2” PMPDouble
Aluminum Green (00)Black (01)
5.1 x 2.9 2.210.4 oz.
295g
10341 lbf.
46 kN
5170 lbf.
23 kNBall Bearing 2 1.48 13 NFPA-G
NFPA1530xxMicro PMP
Single Aluminum
Red/Grey (00)Black (01)
3.75 x 2.55
1.123.5 oz.
99g
4946 lbf.
22 kN– Ball Bearing 1.37 1 13 NFPA-T
NFPA1540xxMicro PMP
Double Aluminum
Gold (00)Black (01)
4.65 x 2.55
1.815.8 oz.
164g
8992 lbf.
40 kN
4496 lbf.
20 kNBall Bearing 1.37 1 13 NFPA-T
NFPA1580003” PMPSingle
Aluminum Red/Grey5.85 x 4.17
1.3812.5 oz.
354g
8542 lbf.
38 kN– Ball Bearing 2.97 2.46 13 NFPA-G
NFPA1585003” PMPDouble
Aluminum Gold 7.1 x 4.17 2.220.8 oz.
590g
10790 lbf.
48 kN
6744 lbf.
30 kNBall Bearing 2.97 2.46 13 NFPA-G
Aluminum Pulleys, continued
(PMP) Prusik-Minding-Pulley: Common in rope rescue. The rope to be pulled is passed through a pulley, and a Prusik is tied on the loaded side. When the rope is pulled, the Prusik rides against the pulley, and the rope slides through it; but when the rope is relaxed, the Prusik slides away from the pulley and grabs the rope. Thus, the combination acts as a ratchet.
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
8
ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches)
THICK (inches) WEIGHT MBS BECKET:
Pin to Pin BEARING TYPE SHEAVE (dia in)
TREAD (dia in)
ROPE(dia mm) RATING
NFPA154801Advance Tech
Mate Aluminum Orange 2.97 x 2.4 1.81
5.44 oz.
154g
7643 lbf.
34 kN– Ball Bearing 1.37 1.0 7 - 12.5 NFPA-T
NFPA154900Advance Tech
HX Aluminum Orange
5.08 x 2.74
1.979.52 oz.
270g
7643 lbf.
34 kN
4046 lbf.
18 kNBall Bearing 1.37 1.0 7 - 12.5 NFPA-T
ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches)
THICK (inches) WEIGHT MBS BECKET:
Pin to Pin BEARING TYPE SHEAVE (dia in)
TREAD (dia in)
ROPE(dia mm) RATING
NFPA125500Kootenay HX
KPP Aluminum Gold/Black
8.67 x 4.34
3.426.4 oz.
750g
8542 lbf.
38 kN– Ball Bearing 3.455 2.21 – NFPA-G
156302 Shuttle Rope Aluminum Blue4.25 x 3.21
1.075.7 oz.
162g
5845 lbf.
26 kN– Ball Bearing 1.32 0.99
13Rope
–
156303 Shuttle Cable Aluminum Orange4.25 x 3.21
1.078 oz.
227g
5845 lbf.
26 kN– Ball Bearing 1.32 0.99
13Cable
–
156304Shuttle Xtreme
Aluminum Green4.25 x 3.21
1.227.6 oz.
215g
5845 lbf.
26 kN– Ball Bearing 1.32 1.06
13Cable
–
Progress Capture Pulleys (PCP)
Specialty Pulleys
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
9
Stainless Steel Pulleys
ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches)
THICK (inches) WEIGHT MBS BECKET:
Pin to Pin BEARING TYPE SHEAVE (dia in)
TREAD (dia in)
ROPE(dia mm) RATING
NFPA150xxx2” SMC/RA
Single Stainless
Steel Bright 4.6 x 2.5 1.4
8.6 oz.
244g
6519 lbf.
29 kN–
Oilite Bushing (000)
Ball Bearing (500)2 1.48 13 NFPA-T
NFPA1510003” SMC/RA
Single Stainless
Steel Bright 6.6 x 3.6 1.5
16 oz.
454g
11465 lbf.
51 kN– Oilite Bushing 3 2.34 16 NFPA-G
NFPA152xxx4” SMC/RA
Single Stainless
Steel Bright 7.7 x 4.6 1.5
23 oz.
652g
11465 lbf.
51 kN–
Oilite Bushing (000)
Ball Bearing (500)4 3.33 16 NFPA-G
NFPA155xxx2” SMC/RA
Double Stainless
Steel Bright 6.6 x 2.5 2
16.2 oz.
460g
17 oz.
482g
9217 lbf.
41 kN
3372 lbf.
15 kN
Oilite Bushing (000)
Ball Bearing (500)2 1.48 13 NFPA-T
NFPA157xxx4” SMC/RA
Double Stainless
Steel Bright 9.9 x 4.6 2.4
40.3 oz.
1142g
44.2 oz.
1253g
14163 lbf.
63 kN
4383 lbf.
19.5 kN
Oilite Bushing (000)
Ball Bearing (500)4 3.33 16 NFPA-G
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
10
ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches) THICK (inches)1 WEIGHT MBS ROPE (dia) mm RATING
13700 Micro Rack Stainless Steel Rack
Stainless Steel Tie-off BarStainless Steel Brake Bars
Bright 8.66 x 2.75 0.3214.1 oz.
399g
1798 lbf.
8 kN
4945 lbf.
22 kN
7 - 12.5
11 - 12.5NA
NFPA14001NFPA Flat 6 Bar, J-Rack
Kit
Stainless Steel RackStainless Steel Tie-off Bar
Aluminum Brake Bars Bright 14.4 x 3.6 0.38
29.2 oz.
828g
3034 lbf.
13.5 kN
4945 lbf.
22 kN
9.5-12.5
11-16
NFPA-T
NFPA-G
NFPA14002NFPA Twist 6 Bar, J-Rack
Kit
Stainless Steel RackStainless Steel Tie-off Bar
Aluminum Brake Bars Bright 14.4 x 3.6 0.38
29.2 oz.
828g
3034 lbf.
13.5 kN
4945 lbf.
22 kN
9.5-12.5
11-16
NFPA-T
NFPA-G
NFPA14003NFPA Long 6 Bar, J-Rack
Kit
Stainless Steel RackStainless Steel Tie-off Bar
Aluminum Brake Bars Bright 17.9 x 3.6 0.38
32.9 oz.
933g
3034 lbf.
13.5 kN
4945 lbf.
22 kN
9.5-12.5
11-16
NFPA-T
NFPA-G
NFPA14400 NFPA 4 Bar U-Rack Kit Stainless Steel Rack
Stainless Steel Tie-off BarStainless Steel Brake Bars
Bright 9.6 x 3.6 0.3826.6 oz.
754g
3034 lbf.
13.5 kN
4945 lbf.
22 kN
9.5-12.5
11-16
NFPA-T
NFPA-G
NFPA14600 6 Bar U-Rack Kit Stainless Steel Rack
Stainless Steel Tie-off Bar Aluminum Brake Bars
Bright 14 x 3.6 0.3829.7 oz.
842g
3034 lbf.
13.5 kN
4945 lbf.
22 kN
9.5-12.5
11-16
NFPA-T
NFPA-G
Rappel Rack Kits
¹Dimension of the rack frame diameter only without the bars installed. See brake bar dimension for additional information.
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
11
ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches) THICK (inches) WEIGHT
13002 6 Bar J-Rack Stainless Steel Bright 14.4 x 2 0.3814.5 oz.
397g
13105 4 Bar U-Rack Stainless Steel Bright 9.6 x 2 0.3810.4 oz.
295g
13106 6 Bar U-Rack Stainless Steel Bright 14 x 2 0.3814.8 oz.
420g
13311 Long J-Rack Stainless Steel Bright 17.9 x 3.6 0.3818.4oz.
523g
13502 6 Bar Twisted J-Rack Stainless Steel Bright 14.4 x 2 0.3814.5 oz.
397g
11000 7/8” Brake Bar Stainless Steel Bright 2.47 x 0.87 0.874.1 oz.
120g
12010 1” Brake Bar - Angled Slot Stainless Steel Bright 2.455 x 1 12.8 oz.
80g
Rappel Racks & Brake Bars Components
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
12
Brake Bars
ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches) THICK (inches) WEIGHT
12020 1” Brake Bar - Straight Slot Stainless Steel Black 2.455 x 1 12.8 oz.
80g
12110 Tie-Off Bar - U-Rack Stainless Steel Bright 3.645 x 1 15.3 oz.
150g
12201 7/8” Brake Bar - Angled Slot Aluminum Bright 2.5 x 0.87 0.871.9 oz.
54g
12301 Tie-Off Bar - J-Rack Stainless Steel Bright 3.65 x 1 15.1 oz.
145g
12401 7/8” Brake Bar - Straight Slot Aluminum Blue 2.5 x 0.87 0.871.8 oz.
51g
12500 U Shape - Angled Slot Stainless Steel Bright 2.7 x 0.86 0.821.7 oz.
48g
12605 7/8” Grooved Angled Slot Aluminum Red 2.5 x 0.87 0.871.8 oz.
51g
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
13
ITEM # DESCRIPTION MATERIAL COLOR(s) L x W (inches) THICK (inches)1 WEIGHT MBS ROPE (dia) mm RATING
817xx Mountaineering 8 Aluminum Black (00)Blue (02)
4.62 x 2.96 0.382.8 oz.
79.4g
1798 lbf.8kN
4046 lbf. 18 kN
8 - 10
10.2 - 13–
113000 Descent Control 8 Stainless Steel Bright 5.18 x 3.61 0.3757.5 oz.
213g
4046 lbf.
18 kN10.2 - 13 –
129000 SMC/ RA 8 Aluminum Black 6 x 3.4 0.55.3 oz.
150g
4945 lbf.
22 kN9.5 - 16 –
142000 Large Rescue 8 w/ Ears Aluminum Grey 7.15 x 6.4 0.58 oz.
227g
3822 lbf.
17 kN9.5 - 16 –
NFPA1265xx Escape 8 Aluminum Gold (01)Black (02)
2.8 x 2.73 0.381.7 oz.
48g
3147 lbf.
14 kN7.5 - 9.5 NFPA-E
NFPA1287xx Rescue 8 w/ Ears Aluminum Black(01)Grey (02)
6.16 x 5.25 0.56.5 oz.
184g
3035 lbf.13.5kN
4945 lbf. 22 kN
9.5 - 12.5
11 - 16
NFPA-T
NFPA-G
1695xx Spire AluminumBlue (02)
Orange (03)2.84 x 1.75 0.72
2.0 oz.
56g
1798 lbf.
8 kN7.5 - 10.7 UIAA
NFPA220300 Spider Stainless Face
Aluminum Body Blue/Black 8.64 x 3.35 1.55
19.8 oz.
562g
3035 lbf.
13.5 kN10 - 12.5 NFPA-T
Descenders
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
14
ITEM # DESCRIPTION MATERIAL COLOR L x W (inches) THICK (inches) WEIGHT
148100 Rope Tracker Plastic Orange 20.1 x 3.4 114.5 oz.
413 g
148200 FLEX Plastic White 16 x 8 0.44 oz.
113 g
148202 FLEX Kit Plastic White 16 x 8 .728.3 oz.
235 g
148210 FLEX Clip Kit Aluminum Black 1” Diameter .720.32 oz.
9.1 g
148500 Edge Roller Aluminum Red 6.9 x 9.9 4.2549.6 oz.
1406 g
149000 Roof Roller Aluminum Gold 10 x 9.9 5.973.7 oz.
2091 g
Protection
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
15
Rigging
ITEM # DESCRIPTION MATERIAL COLOR L x W (inches) THICK (inches) WEIGHT MBS RATING
815xx Rigging Ring Aluminum Grey (03)Red (05)
1.7 OD x 1.1 ID 0.50.9 oz.
26g
7193 lbf.
32 kN–
81600 Aluminum Descending Ring Aluminum Matte 2 OD x 1.5 ID 0.30.4 oz.
11g
3372 lbf.
15 kN–
130104 Webbing Rigging Plate Aluminum Orange 3.3 x 2.9 .251.9 oz.
53g
5171 lbf.
23kN–
NFPA130005 SMC Rigging Plate Aluminum Red 7 x 5.3 0.511.4 oz.
323g
11,240 lbf.
50 kNNFPA-G
NFPA1303xx Mini Rigging Plate Aluminum Black (01)Blue (02)
3.75 x 2.93 0.372.8 oz.
79g
8093 lbf.
36 kNNFPA-G
NFPA1360xx SMC Swivel Aluminum Blue/Black (00)Black/Black (07)
3.5 x 2 1.34.5 oz.
128g
9892 lbf.
44 kNNFPA-G
NFPA220500 Grip Aluminum Gold 3.8 x 2.9 1.856.7 oz.
190g
1124 lbf.
5 kNNFPA-T
305100 SMC Rescue StaykStainless Steel and
AluminumBright/Orange 35 x 3.85 x 1 2.7 9.2 lbs. * –
305130 SMC Rescue Stayk KitStainless Steel and
AluminumBright/Orange 35.1 x 3.85 x 1 2.7 27.6 lbs. * –
*MBS: Actual break strength is dependent on ground placement, density and composition. See user instructions.
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
16
TerrAdaptor
The TerrAdaptor is the most versatile portable anchor system available for use in rescue, industrial, and wilderness environments. This innovate high directional system is the result of the combined years of experience in the design, use and manufacturing of equipment by Pigeon Mountain Industries (PMI), Skedco, and Seattle Manufacturing Corporation (SMC).
The TerrAdaptor system is unique in that it con� gures as a gin pole/monopod, an A-Frame/Bipod, a Quadpod and, of course, the most adjustable Tripod in the market today. Due to the extreme adjustability of the TerrAdaptor, countless non-standard con� gurations are available utilizing shallow angles and horizontals that are not available with other tripod systems in the market. With independently variable head angles and interchangeable compo-nents, the TerrAdaptor will adjust to your rescue environment whether it is rural, urban, industrial, or con� ned space.
The TerrAdaptor Portable Anchor System is Certi� ed CE0843 to EN795 and CEN TS16415 (PENDING) in the standard symmetric Tripod and Quadpod con� gurations and Certi� ed NFPA1983 2012 Edition.
NFPA230100 TerrAdaptor™ Tripod System1 TerrAdaptor™ Tripod Head2 O� set Leg Clamps with 3 Load Locking Pins1 Center Leg Clamp with 3 Load Locking Pins1 Main Attachment Pin3 Legs Kits with Modular Adaptors/Rocker Feet 3 Rope Hobble Sections1 Cotter Pin Kit1 Extra Leg Coupling Pin 1 Extra Load Locking Pin 2 Lash Rings with 1 Coupling Pin each 1 TerrAdaptor™ Head/ Accessory Bag2 TerrAdaptor™ Leg Bags TerrAdaptor™ 1 User Guide
230105 TerrAdaptor™ Quadpod Attachment KitQuadpod Head AttachmentLeg kit complete with Modular Adaptor/Rocker Foot Center Leg Clamp with 3 Load Locking Pins Main Attachment PinRope Hobble Section
230109 TerrAdaptor™ Gin to Quad KitQuadpod Head AttachmentCenter Leg Clamp with 3 Load Locking Pins Main Attachment PinRope Hobble Section
230106 TerrAdaptor™ Gin Pole Kit2 Lash Rings with 2 Coupling PinsLeg Kit with Modular foot/Rocker TerrAdaptor™ User Guide
230230 Lash Ring Assembly 1 Lash Ring1 Leg Coupling Pin
230370 QuickLash Assembly1 QuickLash1 Quick Release Pin
230326 Bolt Replacement Kit 4 SHCS Alloy Bolts 4 Nylok Nuts
230107 Leg Extension Kit 1 Mid-Tube1 Leg Coupling Pin
230260 Load Locking Head Pin
230301 Leg Coupling Pin230304 Replacement Quick Link230307 Rope Hobble Section230311 Main Attachment Pin 230314 TerrAdaptor™ Leg Bag230315 TerrAdaptor™ Head Bag 230360 TerrAdaptor™ Cable Sheave 230500 TerrAdaptor™ Rocker Foot 230510 TerrAdaptor™ Talon Foot 230530 TerrAdaptor™ Articulating Foot230540 TerrAdaptor™ Modular Adaptor Foot 230550 Standard Winch Bracket230551 Capstan Winch Bracket230552 Capstan Winch System
Pigeon Mountain Industries4466 N US Hwy 27 | LaFayette, GA 30728 | USA
Phone: 706.764.1437 | Fax: 706.764.1531www.pmirope.com
Skedco, Inc.10505 SW Manhasset Drive | Tualatin, OR 97062 | USA
Phone: 503.691.7909 | Fax: 503.691.7909www.skedco.com
Only Distributed By
For more information visit www.terradaptor.com
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
17
Mountaineering Tools
ITEM # DESCRIPTION MATERIAL COLOR LENGTH THICK (inches) WEIGHT RATING
138000 Snow Saw Aluminum Blue 20.74 x 3.42 in. 0.1254 oz.
113g–
170500 Ice Axe Head Cover Neoprene Orange 13 in. –2.9 oz.
84g–
171200 Ice Axe Spike Cover Neoprene Orange 3.5 in. –.98 oz.
28g–
1788xx Capra Ice Axe Aluminum Shaft
Chromoly Steel HeadChromoly Steel Spike
Blue
60 cm*65 cm70 cm75 cm80 cm
100 cm
–.99 lbs.
453g*Meets UIAA**
*Axe weights are based off of the 60cm model. | **Tested to meet the current UIAA standard. xx = size
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
18
ITEM # DESCRIPTION MATERIAL COLOR L x W (inches) WEIGHT RATING
162024 I Picket, 24" Aluminum Bright 24 x 212.7 oz.
361g–
162036 I Picket, 36" Aluminum Bright 36 x 219.2 oz.
544g–
162000 Picket CableStainless QuickLinkGalvinized Cable
Bright 36”3.10 oz.
88g_
164000 Snow Anchor, Small Aluminum Bright 7.5 x 4.487.5 oz.
211g_
164100 Snow Anchor, Large Aluminum Bright 10.25 x 5.9810 oz.
296gMeets UIAA*
Pickets and Anchors
**Tested to meet the current UIAA standard.
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
19
Tent Stakes
ITEM # DESCRIPTION MATERIAL COLOR L x W (inches) WEIGHT
110006 6-1/2” Sheet Tent Stake Aluminum Aluminum 6.5 x 0.890.75 oz.
21g
110008 8-1/2” Sheet Tent Stake Aluminum Aluminum 8.5 x 0.891 oz.
28g
110009 9-1/2” Sheet Tent Stake Aluminum Aluminum 9.5 x 0.891 oz.
28g
110011 11-3/4” Perforated Tent Stake Aluminum Aluminum 11.75 x 0.891.36 oz.
38g
11002x Mountaineering Tent Stake Aluminum Bright (0)
Orange (3)9 x 1.29
1.5 oz.
42g
11002xMountaineering Tent Stake
4 Pack Aluminum
Bright (4)Orange (5)
9 x 1.296 oz.
168g
11003x Mountaineering Tent Stake Large Aluminum Bright (0)
Orange (3)14 x 1.29
2.7 oz.
75g
11003x Mountaineering Tent Stake
Large, 4 Pack Aluminum
Bright (4)Orange (5)
14 x 1.2910.8 oz.
300g
11004xMountaineering Tent Stake
Ultra Light Aluminum
Bright (0)Orange (3)
7 x 0.610.50 oz.
14g
11004xMountaineering Tent Stake
Ultra Light, 4 Pack Aluminum
Bright (4)Orange (5)
7 x 0.612.0 oz.
56g
115000 T-Anchor Aluminum Bright 5.15 x 3.751 oz.
28g
115050 T-Anchor, 4 Pack Aluminum Bright 5.15 x 3.754 oz.
124g
1.800.426.6251 | smc gear.net
S E AT T L E M A N U FA C T U R I N G C O R P O R AT I O N | SINCE 1967
20
Endeez
ITEM # DESCRIPTION MATERIAL COLOR L x W (inches) THICK (inches) WEIGHT ROPE (dia)
169101 Endeez Pack, Small Aluminum Pewter/Green 4 x 0.51 0.51.56 oz.
16g7.5 - 9.2
169201 Endeez Pack, Medium Aluminum Pewter/Blue 4 x 0.56 0.56.60 oz.
17g9.2 - 10.4
169202 Endeez Pack, Medium Aluminum Blue/Purple 4 x 0.56 0.56.60 oz.
17g9.2 - 10.4
For the most updated information on all SMC products visit us at www.smcgear.net
6930 Salashan ParkwayFerndale, WA 98248
800.426.6251smcgear.net
President: Kathy HughesDirector of Design: Garin WallaceDirector of Engineering: Chris Starr Director of Sales: Donald Enos
Brands: Endeez & TerrAdaptorProduct Lines:n Endeez Rope End-icator n Ice Axes, Hammers & Accessoriesn Carabiners n Crampons & Accessoriesn Pulleys n Tent Stakesn Rigging n Pickets & Anchorsn Edge Protection n Snow Sawsn Figure 8’s n TerrAdaptor & Accessoriesn Descenders n Rappel Racks & Accessories
Memberships:n Outdoor Industry Association n NFPA n ASTM n NASARn MRA n UIAA n UL n Rotary International
SMC is a mountaineering and technical work and rescue brand that produces elite equipment. SMC designs and manufactures sport and rescue hardware to aircra� industry standards while remaining true to a heritage of excellence and innovation. Seasoned climbers and rescue person-nel depend on the reliable performance of SMC gear in the most critical situations and demand-ing conditions around the globe.
Founded in 1967 as Seattle Manufacturing Corporation, on the slopes and training grounds of the worlds best mountaineers, SMC gear is trustworthy in complicated rescues, record setting rapid ascents, and expeditions to the most remote summits in the world. Our � rst product was an oval carabiner designed and manufactured speci� cally for Mary Anderson of the original REI Co-op Store who was dissatis� ed with the quality and turnaround time of overseas manufactur-ers. Our founder, Jim Clark, identi� ed the critical design and tooling elements that REI required and brought his aircra� industry standards of excellence to the manufacture of mountaineering gear. Our products expanded into the rescue market as climbers of the 60’s and 70’s became the rescue experts of the 80’s. They required durable hardware that would reliably perform in the de-manding rescue environment. This request for stronger, more sophisticated products launched SMC’s technical rescue division.
Thirty years a� er our � rst oval carabiner, SMC saw a change in leadership that would instigate even higher standards of quality for our products. In 1997 while volunteering for Alaska State Parks, avid outdoorswoman Kathy Hughes was approached with the challenge of her life – to become the next CEO of SMC. Kathy le� Alaska to meet with Jim Clark and a� er considering the endless potential of commanding an industry icon, the decision was easy. Kathy became our CEO and moved SMC into a new era of customer service, information-driven communication, and ISO certi� cation.
SMC is one of the few manufacturers of mountaineering and technical work and rescue hardware that is ISO 9001 certi� ed. ISO 9001 is maintained by the International Organization for Standard-ization (ISO) and is a family of standards for managing quality control systems. This indepen-dent, third party certi� cation process guarantees reliability and e� ciency in manufacturing. We are proud that every piece of SMC gear meets these rigid controls; our products are simply the highest quality gear that you can buy; for your life – to last a lifetime.
Today, under the direction of Kathy Hughes and her highly skilled management team, SMC is proud to be a US manufacturer of functional, high-quality mountaineering and technical work and rescue gear that dreams, designs, and manufactures 100% of its equipment in the USA. We hold true to our heritage by continuously working to improve and develop our people, our processes and our procedures. Quality Gear for Life is more than a statement… for us, it is a way of life.