DATASHEET ® smartRDU-ACEM Model No. SMNR220-ACEM Description: smartRDU-ACEM can connect up to 6 sensors - 3 sensors at the front of the Rack and similarly at rear end of the Rack. PT-100 gets placed at Top & Bottom and 12C (T+RH) sensor at middle. Thanks to its strong access control combined features it secures the Rack with 2 Nos. Biometric devices or readers. User enrolment can be done from the Data Centre Monitoring software and same user Id can be used in the wiegand reader itself.The devices connects and transfers all transaction to software over TCP/IP port. Features: ► 1U size Fits into a 19” or 10” rack ► Separate device for every Rack. ► TCP/IP based System, which helps to monitor system from remote location. ► 4nos. Analog channels for Temperature Sensors ► 2nos. Digital channels for Digital Temperature and Humidity Sensors. ► 4nos. potential free inputs for Fire, Intrusion, Water leak detector and Acknowledgment. ► In built 2 Door access control (for Front and Rear Door) with 2nos. Wiegand Reader Interface. ► Configurable User access for only Front door / only Rear door or both doors. ► Advance access control features like access levels and Time Zones. ► ‘Block Access’ feature from Data Centre Monitoring software to avoid access for all authorized users. ► Feature of Expiry Date to restrict contract basis employees and vendors etc. ► Alarm alerts by e mail and SMS (Alarm on:Water Leak, Fire, Unauthorised puch).Door opening & Closing from Software. ► Daily receive email about controller health status. ► All Access and Environment related Reports will send on email automatically on daily, monthly basis.