1 Installation Installation procedure: A Install ADSL Router (Page 1-3) B LAN Card setting (Page 4-12) B.1 For Windows XP userB.2 For Windows Vista userC How to use 3BB CD-ROM and Username/Password Setting (Page 13-21) C.1 Setting by using CD-ROM C.2 Setting via web page A Install ADSL RouterYou can connect the cables according to Figure (1): 1. Connect the LINE port of the ADSL2+ router and the MODEM port of a splitter by using a telephone line. (Two telephone lines are provided in the product package) 2. Connect the LINE port of the splitter and the telephone outlet on the wall by using the othertelephone line. 3. Connect the LAN port of the ADSL2+ router and the Ethernet/LAN port of a PC by using a LAN cable. 4. Connect the POWER port of the ADSL2+ router to the power socket by using the poweradapter. (10) (11) Figure (1) 2 (1) PC (2) Phone (3) RJ-11 telephone line (4) Spl itt er (5) RJ- 11 telephone line (6) Phone jack (7) RJ- 11 telephone line (8) MT880 (9) RJ-45 Ethernet cable (10) power socket (11) power socket Router rear panel Figure (2) ADSL ADSL port; connects to the Modem port of the splitter. Ethernet Ethernet port; connects to the Ethernet port on yourcomputer or an Ethernet hub Reset Press this button and hold for three seconds to restore the Modem to its default setting. Resetting will eliminate the customized data,PowerPower switch12V AC 0.8A Power plug; connects to power adapter. Remark: You can see installation guide from the CD which provided in the box.
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
7/31/2019 SmartAX MT880 ADSL Router User Manual English
Verify the network settings by selecting the Status tab of the web setup page. See Figure (40).
If the IP address is 0.0.0.0, it indicates that the connection is incorrect. The correct value should
be something like 202.xxx.xxx.xxx.
Figure (40)
Troubleshooting
If there is any problem with the ADSL2+ router, try the following operations to fix the problem:
1. Make sure that all the cables and the power adapter are connected properly refer toFigure (1)
2. Make sure that the TCP/IP settings of your PC are correct.That is, the PC is set to obtain an IP address automatically from the DNS server. Refer totopic B.