Smart Irrigation System Raihan Haque Brian Moy Puneet Karnawat Group 7 ME 3484 Polytechnic University April 24, 2003.

Smart Irrigation SystemSmart Irrigation System

Raihan Haque

Brian Moy

Puneet Karnawat

Group 7 ME 3484

Polytechnic University

April 24, 2003

OverviewOverview Objective Guidelines Initial Plan Resources Circuits Pbasic Code Video and Pictures Problems Improvements Real life cost and model Closing

GuidelinesGuidelines Device should be controlled by BS2. Incorporate and document hardware and software

features to prevent damage to the BS2 IC and other components on the device.

Project must include some form of a user interface so that a human user can monitor the device.

Project must utilize at least one actuator. Project must utilize at least one analog and one

digital sensor. Actuators must be controlled using sensory

feedback.

ObjectiveObjective

To implement a autonomous machine that makes the decision of irrigation control based on climate.

Initial PlanInitial Plan

To make the robot go on a predefined pathway.

Stop at predefined intervals.Sense the humidity and temperatureFollow a line and dock.Actuate the valves and water pump based

on humidity levels.

ResourcesResources

SensorsActuatorsIntegrated Circuit ChipsRobot Body and Brain

SensorsSensors

Temperature SensorHumidity Sensor: HM1500NDInfrared SensorLight Sensor

ActuatorsActuators

Continuous Rotation Servos Stepping ServosDC Motor Pump

Integrated Circuit ChipsIntegrated Circuit Chips

DS1620: Temperature Sensor

ADC0831: Analog to Digital Converter

Robot Body and BrainRobot Body and Brain

Brain: Parallax Basic Stamp II, Board Of Education

Body: Parallax BOE-BOT Chassis

CircuitsCircuits

Circuits (continued)Circuits (continued)

Circuits (continued)Circuits (continued)

PBasic CodePBasic Code•Object Detection

•Humidity Sensor

PBasic Code(continued)PBasic Code(continued)•Line Follower

PBasic Code(continued)PBasic Code(continued)

•Temperature Sensor

Videos and PicturesVideos and PicturesFailure Success

Valves

Videos and Pictures(continued)Videos and Pictures(continued)

ProblemsProblems

Predefined Path

Docking

Water Pump

Valves

SolutionsSolutions

Line Following

External Power Source

Docking station improved

Real Life Model and CostReal Life Model and Cost

Model:– Bigger– Better quality sensors– Enhanced drive control through Sensors

Cost– Estimated cost of the prototype: $150– Estimated cost of real life model: $500– Exact cost to be determined

ClosingClosing

Why is this an effective equipment:– Save time– Conserve water consumption– Autonomous