L11.12 L11 SLIDING DOORS B-SLIDE 01.11.2019 Waregemstraat 5 - 9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - [email protected] - www.sobinco.com
L11.12
L11
SLIDING DOORS
B-SLIDE01.11.2019
Waregemstraat 5 - 9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - [email protected] - www.sobinco.com
L11.12.02 LOCKS
B-SLIDE
L11.12
CONTENTS
1. General characteristics........................................................L11.12.03
2. Central lock ..........................................................................L11.12.032.1. General dimensions and function L11.12.032.2. Types L11.12.042.3. Adjustment hook bolt L11.12.04
3. Top and bottom lock ............................................................L11.12.05
4. Keeps ....................................................................................L11.12.06
5. Operations ............................................................................L11.12.075.1. Sobinox handles L11.12.075.2. Edge handles L11.12.085.3. Horizon handles L11.12.125.4. Finger pull n° 74003 L11.12.13
6. Guiding piece n° 79000 .......................................................L11.12.14
7. Installation examples ..........................................................L11.12.14
8. Profilepreparationsandinstallation ..................................L11.12.15
LOCKS L11.12.03
B-SLIDE
L11.12
1. General characteristics• Multi-point lock for aluminium and PVC sliding doors.
• Modular: the central lock is easily expandable to a multi-point lock (3-point lock and more) with extensions. The central lock and the extensions contain an adjustable hook lock.
• Opening and closing of the sliding door is by means of a rod, that slides in the faceplate and moves the hook bolts up and down.
• The multipoint lock can be operated by a window handle or a finger pull and can be locked by a cylinder.
2. Central lock2.1. General dimensions and function
• Entirely manufactured from high quality materials: - faceplate, rod, hook bolts and screws: stainless steel - spindle follower: brass.
• U-shaped faceplate of 15.2 mm.
• Quick and easy installation with special connections between the central lock and the extensions.
• The upward sliding hook bolt prevents the lifting of the vent.
• Anti-mishandling device: the hook bolts stay in place in the opened position.
• Positioning screws or support screws: prevent twisting of the lockcase when fixing the handle.
Positioning screws
Anti-mishandling device
L11.12.04 LOCKS
B-SLIDE
L11.12
2.2. Types
• Lock available with 3 different backsets:
2.3. Adjustment hook bolt
• Easy horizontal adjustment of 4 mm of the hook bolts.
• The adjustment screw is underneath the hook bolt and can be operated by an allen key of 2.5 mm.
Lock X (mm) 70000-10 11.670000-14 14.170000-20 20.6
Allen key 2.5 mm
LOCKS L11.12.05
B-SLIDE
L11.12
3. Top and bottom lock• Quick and easy installation with special connections between the central
lock and the extensions: see drawing on the right hand side.
• The extensions are available in 2 lengths: 350 mm and 640 mm.
• The hook bolts also have a horizontal adjustment of 4 mm.
• The bottom extension is also available with locking mechanism, operated by a eurocylinder.
• Important note: the housing of the cylinder always has the same installa-tion depth and is independent from the backset of the central lock.
Length 640 mm Length 350 mm
central lock
top lockbottom lock
Note:The hook bolts are drawn in opened position.
Hook bolt
Locking mechanism
n° 70001 n° 70002 CYLn° 70002 (without locking)
Onl
y fo
rn°
700
02 C
YL
TOP BOTTOM
n° 70005 n° 70006 CYLn° 70006 (without locking)
Onl
y fo
rn°
700
06 C
YL
TOP BOTTOM
L11.12.06 LOCKS
B-SLIDE
L11.12
4. Keeps
• The keeps in zinc alloy are profile-related.
n° 72000 n° 72001
To slide in a frame groove and clamp.
n° 72006
n° 72002 n° 72003
LOCKS L11.12.07
B-SLIDE
L11.12
5. Operations5.1. Sobinox handles
• Characteristics Sobinox handles: see chapter A11.15.• The handles can be supplied without or with square spindle of 7 mm with length 25 mm or 38 mm.• A number of handles are also available in an aluminium version (AL).
Finish: anodised or polyester powder coated in more than 450 RAL colours.
With oval backplate
With rectangular backplate
Cylinder locking handles
• The cylinder locking handles can be used: - when there’s only a handle on the inside.
- as an option for the bottom exten-sion with locking mechanism.
n° 1850-0n° 1850-25n° 1850-38n° 1850AL-0n° 1850AL-25n° 1850AL-38
n° 1854-0n° 1854-25n° 1854-38
n° 1851-0n° 1851-25n° 1851-38
n° 1852-0n° 1852-25n° 1852-38n° 1852AL-0n° 1852AL-25n° 1852AL-38
n° 1853-0n° 1853-25n° 1853-38
n° 1855-0n° 1855-25n° 1855-38n° 1855AL-0n° 1855AL-25n° 1855AL-38
n° 1859-0n° 1859-25n° 1859-38
n° 1856-0n° 1856-25n° 1856-38
n° 1857-0n° 1857-25n° 1857-38n° 1857AL-0n° 1857AL-25n° 1857AL-38
n° 1858-0n° 1858-25n° 1858-38
n° 1852 CYL-0n° 1852 CYL-25n° 1852 CYL-38
n° 1857 CYL-0n° 1857 CYL-25n° 1857 CYL-38
L11.12.08 LOCKS
B-SLIDE
L11.12
5.2. Edge handlesGeneral
• Window handle with integrated spring system, rotating over 360° in 4 steps of 90°.
• Due to the cover, the screws are always concealed.
• Versions: - standard handle - handle, lockable by cylinder (CYL) - handle, lockable by push button (KNOB)
• All handles are non-handed.
• Suitable for aluminium, wood and PVC.
• The Edge handles have the same design as the Edge door handles. So these handles can be used next to one another with the advantage of having the same appearance.
• Finish: - N° 35000-682-xx, 35300-682-xxCYL, 35300-682-xxKNOB: grip and base plate cover in aluminium, base in zinc alloy, always polyester powder coated in more than 450 RAL colours.
- N° 30000-682-..: grip and base in aluminium, anodised or polyester powder coated in more than 450 RAL colours.
Standard handle n° 35000-682-xx
• The handle has been tested in accordance with the European standard EN13126-3:2012 and obtained the following classification code:
Order code Spindle length L35000-682-25 25 mm35000-682-38 38 mm35000-682-70 70 mm35000-682-90 90 mm
Categoryof use
Durability MassFire
resistanceSafety
Corrosionresistance
SecurityApplication
partTestsizes
1 4/180 - 0 1 4 0 3/C1 -
LOCKS L11.12.09
B-SLIDE
L11.12
Handle with cylinder n° 35300-682-xxCYL• The handle can be locked in closed position (0°).
• The handle has been tested by SKG, 3 stars. Attention:thecertificateexpireswhenyouorderinmillfinish!
• The handle has been tested in accordance with the European standard for anti-burglary windows EN1627-1630 (class RC1-6) and has a tested break moment of 100 Nm.
• The handle has been tested in accordance with the European standard EN13126-3:2012 and obtained the following classification code:
Order code Spindle length L35300-682-25CYL 25 mm35300-682-38CYL 38 mm35300-682-70CYL 70 mm35300-682-90CYL 90 mm
Categoryof use
Durability MassFire
resistanceSafety
Corrosionresistance
SecurityApplication
partTestsizes
1 4/180 - 0 1 4 2/2 3/C1 -
L11.12.10 LOCKS
B-SLIDE
L11.12
Handle with push button n° 35300-682-xxKNOB• The handle locks automatically in closed position (0°) by means of a push button operated cylinder.
• The handle is unlocked by pushing the button. Then the handle can be turned.
• The handle has been tested in accordance with the European standard for anti-burglary windows EN1627-1630 (class RC1-6) and has a tested break moment of 100 Nm.
• The handle has been tested in accordance with the European standard EN13126-3:2012 and obtained the following classification code:
Order code Spindle length L35300-682-25KNOB 25 mm35300-682-38KNOB 38 mm35300-682-70KNOB 70 mm35300-682-90KNOB 90 mm
Categoryof use
Durability MassFire
resistanceSafety
Corrosionresistance
SecurityApplication
partTestsizes
1 4/180 - 0 1 4 2/1 3/C1 -
LOCKS L11.12.11
B-SLIDE
L11.12
Variant handle n° 30000-682• Only available as standard version.
Profilepreparations
Order code Spindle length L30000-682 25 mm30000-682-38 38 mm
L11.12.12 LOCKS
B-SLIDE
L11.12
5.3. Horizon handles
Horizon handle n° 30000-680• Window handle with integrated spring system, rotating over 360° in 4 steps of 90°.
• Due to the cover, the screws are always concealed.
• Only available as standard version.
• All handles are non-handed.
• Suitable for aluminium, wood and PVC.
• The Horizon handles have the same design as the Horizon door handles. So these handles can be used next to one another with the advantage of having the same appearance.
• Finish: grip and base in aluminium, anodised or polyester powder coated in more than 450 RAL colours.
Profilepreparations• Similar to the Edge handles.
Order code Spindle length L30000-680 25 mm30000-680-38 38 mm
LOCKS L11.12.13
B-SLIDE
L11.12
5.4. Finger pull n° 74003
General
• The B-Slide can also be operated by a finger pull with lever handle. The finger pull is connected to the hook bolt casement of the central lock.
• Easy operation: - lever handle upwards: open - lever handle downwards: close
• The finger pull is supplied with 2 connection pins (short and long) in zinc alloy. The selection of the pin is determined by the distance between the finger pull and the position of the lock. The pin must engage at least 7 mm in the hook bolt casement.
• Finish: aluminium faceplate, anodised or polyester powder coated in more than 450 RAL colours.
Installation/demounting
Installation:
1. Slide pin in finger pull. The pin can be slid in from the left or right (in accordance with opening direction).
2. Mount the finger pull in the profile cut-out.3. Slide the finger pull behind the profile wall at the top of the
cut-out.4. Turn the finger pull in the profile at the bottom of the cut-
out. Make sure that the pin engages into the hook bolt case-ment.
5. Make sure that the clamping piece is well behind the bottom profile wall.
Demounting:Through the hole of ø10 mm (see profile preparations), you can push the clamping piece upwards with a screwdriver. The finger pull is pushed out of the profile.
Connection pins
Short pin: X = 24.4 mmLong pin: X = 31.8 mm
Clamping piece
L11.12.14 LOCKS
B-SLIDE
L11.12
6. Guiding piece n° 79000• The guiding piece provides a much better guiding of the vent when closing the
sliding door.
• The guiding piece is mounted on the faceplate of the lock and is fixed together with the lock.
• We recommend to provide a guiding piece at every hook bolt.
• Material: synthetic material.
• One set n° 79000 contains 20 pieces.
7. Installation examples
Installation example
With interior and exterior handle
B-Slide n° 70000-14Keep n° 72001Handle n° 1850-0
With interior handle
B-Slide n° 70000-14Keep n° 72006Handle n° 1850-25
Withfingerpull
B-Slide n° 70000-14Keep n° 72006Finger pull n° 74003
LOCKS L11.12.15
B-SLIDE
L11.12
8. Profile preparations and installation
Preparations
Length X depends on the central lock type:70000-10 : X = 7.4 mm70000-14 : X = 9.9 mm70000-20 : X = 16.4 mm
Length Y depends on the profile type:Y min = 11.8 mmY max = 13.8 mm
For the finger pull, dimension D must be between 13 mm and 23 mm.
Reference
Handle and cylinder Finger pull
Central lockLocking mechanismTop lockBottom lock
Milling for top lock
Milling for bottom lock
Milling for locking with eurocylinder
Hole for demounting finger pull
Length Z depends on the type of extension:Short (350 mm) : Z=197.5 mmLong (640 mm) : Z=487.5 mm
L11.12.16 LOCKS
B-SLIDE
L11.12
Installation
• The hook bolt must be put in the correct position to make the connection with the top and bottom extension. This can only be done by pushing in the anti-mishandling device.
• We recommend to use countersunk head tapping fixing screws DIN 7982 St3.9 or St4.2.
• Installation order:
- Mount the central lock in the profile cut-out and put the hook bolt in the lower position (1).
- Fix the central lock using the lower fixing hole. - Connect the bottom extension (with the hook bolt in the lower position (1)) and fix it.
- Slide the hook bolts to the upper position (2). - Fix the central lock using the upper fixing hole. - Connect the upper extension (with the hook bolt in the upper position (2)) and fix it.
• Positioning screws or support screws: Where the profile allows it, we recommend to mount these screws to prevent twisting of the central lockcase when fixing the handle.
Connect lower extension
Open position
Connect upper extension
(closed position)
(1)
(2)
With allen key 2 mm
Positioning screws