2012 www.panelplus.co SLIDES, HINGES & PNEUMATIC LIFTS
Mar 30, 2016
2012
www.panelplus.co
SLIDES, HINGES & PNEUMATIC LIFTS
Slides, Hinges &
Pneumatic Lifts
Drawer Sidespg. 293
Hinges• Acrylic Hinge - pgs. 306-307• Euro Hinges • Concealed Metal - pg. 302 • Double Action Spring Hinge - pg. 303 • Face Frame - pg. 295 • Flap Door Hinge - pg. 303 • Glass Door Hinge - pg. 303 • Institutional Hinge - pg. 303 • Plates For Euro Hinge - pg. 300 • Screw On & Dowel - pgs. 296-297 • Soft Close Euro Hinge & Attachment - pg. 302 • Specialty Euro Hinge - pg. 301 • Tool-Less - pgs. 298-299• Lateral Opened Door Hinge pg. 313• Panel Hinge (Plastic) - pg. 307• Piano Hinge • Metal - pg. 305 • Plastic - pgs. 306-307• Soft Closing Damping - pg. 315• Tools - pg. 304Hydraulic
Door Closerpg. 314
Sliding Door Track
& Hardware• Aluminum Sliding Passing Track - pgs. 317• Closet Door - pgs. 322-323• Furniture Inlay & Bypass Track - pgs. 318-319• Plastic Bypassing Track - pg. 316• Top Sliding Track (Wood) - pgs. 320-321
Slides• Euro Slides - pg. 289• Full Extension - Undermount • Soft close (Grass) - pg. 280 • Soft Close, Concealed - pg. 281 • Full Extension - Side Mount • 1” Over Travel (Dynaslide) - pg. 283 • 1” Over Travel Economy (e-line) - pg. 284 • 1” Over Travel Heavy Duty (e-line) - pg. 288 • Push Rebound, (REPON) - pg. 285 • Stainless Steel (Sugatsune) - pg. 287 • Low Profile (Fulterer) - pg. 282• Fulterer Pantry Pull Out- pgs. - 290-291• Keyboard Pull Out - See Section D• Waste Container - pgs. 292
Pneumatic Lifts• Lid Stays - pgs. 308-312
Soft Close Dampening System
pg. 282
Works with any drawer slide, allowing drawer to softly dampen & pull shut without slamming
pgs. 279-323
F
F-279
F-280
CONCEALED UNDERMOUNT ROLLER SLIDESFOR FACE FRAME APPLICATIONS
MOUNTING SCREWS SOLD SEPARATELY
See page 267 for our complete screw line
FULL EXTENSION SOFT CLOSE DRAWER SLIDESFACE FRAME OR FRAMELESS APPLICATION
JUST A SLIGHT PULL IS ALL YOU NEED
PRODUCT FEATURES:• Regular extension, concealed slide with smooth glide Delrin rollers.• Double captive, self-aligning slide system.• 1-1/4” self-closing feature.• 100 lb. static load capacity, 75 lb. dynamic load capacity.• Made in the USA & meets ANSI/BHMA A-156.9-2001 industry standard.• For use with up to 5/8” drawer material.• Rear sockets feature side-to-side plus height and depth adjustment.• Each set includes slides and rear mount sockets.• Almond color.
PRODUCT FEATURES:• Easily pulls open & closes with the grass soft-close dampening system.• Full extension with synchronized mechanism.• Integrated 2-dimesional adjustment for alignment- height + 3.5 mm & side + 1.5 mm• Each pair of slides is handed- 1 left & 1 right.• For use with up to 5/8” drawer material.• 100 lb. load capacity.• Each set includes slides, left & right front fixing brackets, and two rear mount brackets (rear mount brackets required for face frame applications only).
Calculation Outside Drawer WidthDrawer side thickness 16 (5/8”) 15 (9/16”) 14 (9/16”) 13 (1/2”)
Deduct from inside cabinet width 10 (3/8”) 12 (1/2”) 14 (9/16”) 16 (5/8”)
Frameless
Face Frame
Bonus Feature:Height & SideAdjustment
DRAWERLENGTH
CABINETDEPTH
INTERIOR CABINET DEPTHPART # MINIMUM MAXIMUM
OI-5323-09 9” 12” 10-15/16” 11-1/2”OI-5323-12 12” 15” 13-27/32” 14-7/16”OI-5323-15 15” 18” 16-29/32” 17-1/2”OI-5323-18 18” 20” 20” 20-9/16”OI-5323-21 21” 24” 22-15/16” 23-1/2”
16 pieces required per pairSCR-6625FHZ
DRAWER LENGTH
CABINETDEPTH
INTERIOR CABINET DEPTHPART # MINIMUM MAXIMUM
OI-DP2D-9 9” 12” 11-15/32” 11-3/4”OI-DP2D-12 12” 15” 12-7/8” 14-9/16”OI-DP2D-15 15” 18” 15-7/8” 17-9/16”OI-DP2D-18 18” 20” 18-27/32” 20-9/16”OI-DP2D-21 21” 24” 21-27/32” 23-17/32”
GRASS EXPRESS
GRASS DYNAPRO 2-D
F-281
SLIDE INSIDE CABINET DEPTH MOUNTING MEASUREMENTSSIZE
mm • inchesTRAVEL
mm • inchesMINIMUMmm • inches
MAXIMUMmm • inches
Amm • inches
Bmm • inches
Cmm • inches
Dmm • inches
305 • 12” 292 • 11.50” 325 • 12.80” 366 • 14.41” – – – 32 • 1.26” 381 • 15” 368 • 14.49” 401 • 15.79” 442 • 17.40” 320 • 12.60” – – 32 • 1.26” 457 • 18” 444 • 17.48” 477 • 18.78” 518 • 20.39” 320 • 12.60” 416 • 16.39” – 32 • 1.26” 553 • 21” 520 • 20.47” 553 • 21.77” 594 • 23.39” 320 • 12.60” 416 • 16.39” 480 • 18.90” 32 • 1.26”PACKING UNIT: 10 PAIR PER BOX (INCLUDING REAR MOUNTING BRACKETS AND DRAWER LOCKING DEVICE)
OI-4100 SERIES
• Galvanized Steel.• Has great smooth running qualities.• Can be used with Frameless or Face Frame cabinets.• Easy close device prevents slamming.• Each set includes slides, front mounting clips and rear mounting brackets.
Product Features
FOR USE WITH UP TO 5/8” DRAWER MATERIAL
MOUNTING SCREWS SOLD SEPARATELY
See page 267 for our complete screw linePART # LENGTH
LOAD RATING
CARTON SIZE
OI-4100-12 12” 85 lbs. 10 PairsOI-4100-15 15” 80 lbs. 10 PairsOI-4100-18 18” 80 lbs. 10 PairsOI-4100-21 21” 75 lbs. 10 Pairs
16 pieces required per pairSCR-6625FHZ
75 LB. FULL EXTENSION SOFT CLOSECONCEALED UNDERMOUNT SLIDE
F-282
OI-5043 SERIES•Availablelengths:10”-28”.•ClearZincFinish.•Sidemountedwithtriggerrelease.•Lowprofileforshallowdrawersandtraditionaldesks.
•Lowprofile,only43mm(1.69”height).
•100lbs.LoadRating•Fullextensiontravel.•1/2”Sidespacing.•Triggerreleasedesign.•FaceFramehole.•32mmScrewMountingsystem.
•Coldrolledsteelwithsteelballbearings.
Product Features
mOuntIng SpEcIFIcatIOnS
mOuntIng ScREWS SOLD SEpaRatELY
See page 267 for our complete screw line
Note: Measurements in Metric
SEE PAGE 294FOR REAR MOUNTING
BRACKETS AND SPACERS
•Madeofgreyhighimpactpolystyrene.•3modelsavailabletoaccommodatesideclearance .39”(10mm)-.53”(13.5mm).•Drawerissoftlydampened&pulledshutwithoutslamming.•Allmountinghardware&installationinstructionsincluded.
Product Features4.5 7
496145
192
129 3132
27 522
OI-8002
OI-8001, OI-8003
Follower
Works with any drawer slide.
SLIDE caBInEt pROFILE DRaWER pROFILELEngtHSmm•inches
tRaVELmm•inches
amm•inches
Bmm•inches
cmm•inches
Dmm•inches
Emm•inches
Fmm•inches
gmm•inches
250•9.84” 250•9.84” – – 195•7.68” 160•6.30” – – 160•6.30” – – –300•11.81” 300•11.81” – 244•9.61” 224•8.82” 192•7.56” 128•5.04” – 192•7.56” – – 32•1.26”350•13.78” 350•13.78” – 296•11.65” 282•11.10” 224•8.82” 128•5.04” – 256•10.08” – 96•3.78” –400•15.75” 400•15.75” 320•12.60” 282•11.10” – 224•8.82” 128•5.04” 25•.98” 288•11.34” – 128•5.04” 32•1.26”450•17.72” 450•17.72” 352•13.86” 282•11.10” – 224•8.82” 128•5.04” 43•1.69” 352•13.86” 271•10.67” 160•6.30” –500•19.69” 500•19.69” 416•16.38” 282•11.10” – 224•8.82” 128•5.04” 29•1.14” 416•16.38” 297•11.69” 192•7.56” –550•21.65” 550•21.65” 448•17.64” 352•13.86” 282•11.10” 224•8.82” 128•5.04” 47•1.85” 448•17.64” 323•12.72” 224•8.82” –600•23.62” 600•23.62” 480•18.90” 352•13.86” 282•11.10” 224•8.82” – 64•2.52” 512•20.16” – 224•8.82” –
paRt # LEngtHLOaD
RatIngOI-5043-10 10” 120lbs.OI-5043-12 12” 120lbs.OI-5043-14 14” 115lbs.OI-5043-16 16” 110lbs.OI-5043-18 18” 105lbs.OI-5043-20 20” 100lbs.OI-5043-22 22” 95lbs.OI-5043-24 24” 90lbs.
16 pieces required per pairScR-6625FHZ
paRt #DRaWERWEIgHt
SIDEcLEaRancE pacKIng
OI-8002 Upto40lbs.* .39”(10mm)-.53”(13.5mm) PerPiece
OI-8001 Upto75lbs. .49”(12.5mm) PerPairOI-8003 Upto150lbs. .49”(12.5mm) PerPair*nOn-HanDED-uSE 2 pIEcES FOR DRaWERS up tO 80 LBS.
EASY CLOSE SOFT CLOSE DAMPENING SYSTEM
100 LB. LOW PROFILE FULL EXTENSION DRAWER SLIDE
F-283SEE PAGE 294 FOR REAR MOUNTING BRACKETS AND SPACERS
•1”overtravel.•AvailableLengths:10”-28”.•ClearZincfinish.•SideMountedwithButterflyrelease.•1/2”sideclearance.
ButtERFLY RELEaSE
mOuntIng SpEcIFIcatIOnS
SLIDE mOuntIng mEaSuREmEntSLEngtHSmm•inches
tRaVELmm•inches
a1mm•inches
amm•inches
Bmm•inches
cmm•inches
Dmm•inches
Emm•inches
Fmm•inches
gmm•inches
Hmm•inches
250•9-21/32” 254•10” – – – – – 192•7-9/16” – – –300•11-13/16” 305•12” – – – – – 242•9-17/32” 224•8-7/8” – –350•13-25/32” 356•14” 128•5-1/32” – – – – 292•11-1/2” 224•8-7/8” – –400•15-3/4” 406•16” 128•5-1/32” – 320•12-19/32” – – 342•13-15/32” 224•8-7/8” 320•12-19/32” –450•17-23/32” 457•18” 128•5-1/32” – 320•12-19/32” – – 392•15-7/16” 224•8-7/8” 352•13-55/64” –500•19-11/16” 508•20” 128•5-1/32” 192•7-9/16” 352•13-55/64” – – 442•17-13/32” 224•8-7/8” 416•16-5/32” –550•21-21/32” 559•22” 128•5-1/32” 224•8-7/8” – 416•16-3/8” – 492•19-3/8” 224•8-7/8” 352•13-55/64” 448•17-41/64600•23-5/8” 610•24” 128•5-1/32” 224•8-7/8” – 416•16-3/8” – 542•21-11/32” 224•8-7/8” 352•13-55/64” 480•18-57/64”650•25-19/32” 660•26” 128•5-1/32” 224•8-7/8” – 416•16-3/8” 544•21-13/32” 592•23-19/64” 224•8-7/8” 352•13-55/64” 544•21-27/64”700•27-9/16” 711•28” 128•5-1/32” 224•8-7/8” 288•11-11/32” 448•17-3/8” 544•21-13/32” 642•25-9/32” 224•8-7/8” 352•13-55/64” 544•21-27/64”
•EasytopulloutButterflyreleasefordisconnect.•Ballretainerdetentforeasydrawerre-install.•Hold-In-Detent.•1/2”Sidespacing.•Loadrating:100lbs/Pair(22”length).•Screwmountingsystem32mmcompatible.•ComparablewithAccuride®3834andKnape&Vogt®8405.
•Quietestslideonthemarket.
Product Features
Note: Measurements in Metric.508”
1.816”
pROFILE:
mOuntIng ScREWS SOLD SEpaRatELY
See page 267 for our complete screw line
100 LB FuLL EXtEnSIOn SLIDEWItH OVER tRaVEL ZInc FInISH (Zn)
paRt # LEngtHLOaD
RatIngREcOmmEnDED DRaWER WIDtH
caRtOn SIZE
OI-4634-10- 10” 120lbs. 10” 20OI-4634-12- 12” 115lbs. 12” 20OI-4634-14- 14” 110lbs. 14” 20OI-4634-16- 16” 105lbs. 16” 20OI-4634-18- 18” 100lbs. 18” 10OI-4634-20- 20” 100lbs. 20” 10OI-4634-22- 22” 100lbs. 22” 10OI-4634-24- 24” 85lbs. 24’ 10OI-4634-26- 26” 80lbs. 26” 10OI-4634-28- 28” 75lbs. 28” 10
(16 pieces required per pair)
ScR-6625FHZ
100 LB. FULL EXTENSION SLIDE 4634
F-284
mOuntIng SpEcIFIcatIOnS
WItH 1” OVER tRaVEL•Standardwith1”overtravel.•AvailableLengths:10”-28”.•ClearZincFinish.•Sidemountedwithreleaselatchforeasydisconnect.•Holdindetent.•1/2”sidespacing.•Loadrating:100lbs/pair(22”length).•Screwmountingsystem32mmcompatible.•1/2”sideclearance.•ComparablewithDynaslide®4634,Accuride®3834,&Knape&Vogt®8405.
Product Features
Note: Measurements in Metric
pROFILE:
1.816”
.508”
SEE PAGE 294 FOR REAR MOUNTING BRACKETS AND SPACERS
mOuntIng ScREWS SOLD SEpaRatELY
See page 267 for our complete screw line
SLIDE mOuntIng mEaSuREmEntSLEngtHSmm•inches
amm•inches
Bmm•inches
cmm•inches
Dmm•inches
Emm•inches
Fmm•inches
gmm•inches
Hmm•inches
Imm•inches
Jmm•inches
Kmm•inches
250•10” – – – – – 192•7.68” 279.4•11.176” 250•10” – – –300•12” 128•5.12” – – – – 242•9.68” 330.2•13.208” 300•12” 224•8.96” – –350•14” – – – – – – – 350•14” – – –400•16” 128•5.12” – – – – 342•13.68” 431.8•17.272” 400•16” 224•8.96” 320•12.8” –450•18” 128•5.12” – – 320•12.8” – 392•15.68” 482.6•19.304” 450•18” 224•8.96” 352•14.08” –500•20” 128•5.12” – – 320•12.8” – 442•17.68” 534.2•21.368” 500•20” 224•8.96” 416.1•16.644” –550•22” 128•5.12” – – – 416•16.64” 492•19.68” 584.2• 23.368” 550•22” 224•8.96” 352•14.08” –600•24” 128•5.12” 224•8.96” – 416•16.64” – 542•21.68” 635•25.4” 600•24” 224•8.96” 352•14.08” 480•19.2”650•26” 128•5.12” 224•8.96” – 416•16.64” 544•21.75” 592•23.68” 685.8•27.432” 650•26” 224•8.96” 352•14.08” 544.1•21.764”700•28” 128•5.12” 224•8.96” 288•11.52” 416•16.64” 544•21.75” 642•25.68” 736.6•29.464” 700•28” 224•8.96” 352•14.08” 544.1•21.764”
paRt # LEngtHLOaD
RatIngREcOmmEnDED DRaWER WIDtH
caRtOn SIZE
OI-9400-10 10” 120lbs. 10” 15PairsOI-9400-12 12” 115lbs. 12” 15PairsOI-9400-14 14” 110lbs. 14” 15PairsOI-9400-16 16” 105lbs. 16” 15PairsOI-9400-18 18” 100lbs. 18” 15PairsOI-9400-20 20” 100lbs. 20” 15PairsOI-9400-22 22” 100lbs. 22” 15PairsOI-9400-24 24” 85lbs. 24” 10PairsOI-9400-26 26” 80lbs. 26” 10PairsOI-9400-28 28” 75lbs. 28” 10Pairs
16 pieces required per pair
ScR-6625FHZ
ECONOMY 100 LB. FULL EXTENSION SLIDE
F-285
WItH puSH REBOunD
See page 247 for our complete screw line.
WItH puSH REBOunD
See page 247 for our complete screw line.
BOnuS FEatuRES:- Only 4mm or (.16”) push
in on drawer front required to activate.
- 3mm (.12”) reveal or gap on the drawer front.
•Lengths:12”to28”.•ClearZincFinish.•BlackFinishavailable whilesupplieslast.•1/2”sideclearance.
SLIDE mOuntIng mEaSuREmEntSSIZE
mm•inchestRaVELmm•inches
amm•inches
Bmm•inches
cmm•inches
Dmm•inches
Emm•inches
LOaDkg•lbs.
300•12” 305•12” 96•3-3/4” – – 136•5-3/8” – 22•50350•14” 356•14” 96•3-3/4” 128•5” – 192•7-9/16” – 27•60400•16” 406•16” 128•5” 144•5-11/16” – 128•5” 240•9-1/2” 27•60450•18” 457•18” 160•6-1/4” 160•6-1/16” – 128•5” 288•11-3/8” 45•100500•20” 508•20” 192•7-9/16” 160•6-1/16” – 192•7-9/16” 336•13-1/4” 45•100550•22” 559•22” 224•8-13/16” 192•7-9/16” 224•8-13/16” – 384•15-1/8” 45•100600•24” 610•24” 224•8-13/16” 224•8-13/16” 256•10-1/16” – 432•17” 45•100650•26” 660•26” 256•10-1/16” 256•10-1/16” 288•11-5/16” – 486•19-1/8” 36•80700•28” 711•28” 256•10-1/16” 320•12-9/16” 320•12-9/16” – 544•21-1/8” 31•70
WItH puSH REBOunD
•Push-Reboundfunctionbuiltinslide,easyforinstallation.
•Rebound2”-5”whenpushdrawer.
•Non-handeddisconnectrelease.
•Electro-Zincplatedwithclearchromate.
•Only4mm(.16”)requiredtofullypushinforopenorclose.
•Loadrating100lbsperpairat22”length(75lbsforepoxyfinish).
Product Features
1.8”
.5”
Note: Measurements in Metric
pROFILE:
mOuntIng SpEcIFIcatIOnS
mOuntIng ScREWS SOLD SEpaRatELY
maXImum REcOmmEnDED DRaWER WIDtH
ZInc FInISH (Zn) * BLacK FInISH (BK)
paRt # LEngtHLOaD
RatIngcaRtOn
SIZEcaRtOn
SIZEOI-4060-12 12” 50lbs. 19” 20Pairs 20PairsOI-4060-14 14” 60lbs. 21” 20Pairs 20PairsOI-4060-16 16” 60lbs. 23” 20Pairs 20PairsOI-4060-18 18” 100lbs. 25” 10Pairs 10PairsOI-4060-20 20” 100lbs. 27” 10Pairs 10PairsOI-4060-22 22” 100lbs. 29” 10Pairs 10PairsOI-4060-24 24” 100lbs. 31” 10Pairs 10PairsOI-4060-26 26” 80lbs. 33” 10Pairs 10PairsOI-4060-28 28” 70lbs. 35” 10Pairs 10Pairs
16 pieces required per pair
ScR-6625FHZ
* 17/32” Side Clearance
100 LB. FULL EXTENSION BALL BEARING SLIDE
F-286
Note: Measurements in Metric
tEStED & cERtIFIED
to anSI/BIFmaspecifications
cycles at 50,000
SLIDE mOuntIng mEaSuREmEntSSIZE
mm•inchestRaVELmm•inches
amm•inches
Bmm•inches
cmm•inches
Dmm•inches
Emm•inches
**300 • 11.81” 260•10.24” – – 166•6.64” 144•5.67” 96•3.78”350 • 13.78” 350•13.78” – – 160•6.30” 144•5.67” 128•5.04”400 • 15.75” 400•15.75” – – 224•8.82” 160•6.30” 160•6.30”450 • 17.72” 450•17.72” – – 256•10.08” 192•7.56” 160•6.30”500 • 19.69” 500•19.69” – 352•13.86” 224•8.82” 192•7.56” 192•7.52”550 • 21.65” 550•21.65” 416•16.38” 352•13.86” 224•8.82” 224•8.82” 224•8.82”600 • 23.62” 600•23.62” 416•16.38” 352•13.86” 224•8.82” 256•10.08” 256•10.08”650 • 25.59” 650•25.59” 512•20.16” 352•13.86” 224•8.82” 256•10.08” 288•11.34”700 • 27.56” 700•27.56” 512•20.16” 352•13.86” 224•8.82” 288•11.34” 288•11.34”
** 25kg. (55 lbs) max. load capacity for 300mm slide.
mOuntIng SpEcIFIcatIOnS
SEE PAGE 294 FOR REAR MOUNTING BRACKETS AND SPACERS
mOuntIng ScREWS SOLD SEpaRatELY
See page 267 for our complete screw line
•Lengths:12”to28”.•ClearZincFinish.• Precisionballbearingslideformedium-dutyapplicationsin
officeandresidentialfurniture.• Drawerprofilefeaturesaneasy tooperatedisconnectfinger releasetrigger.• System32compatiblehole locations.• Drawerslideisnon-handed.• NewECD™easyclose (softclose)device.• 1/2”sideclearance.
WItH EaSY cLOSE (SOFt cLOSE) mEcHanISm
Product Features
16 pieces required per pair
ScR-6625FHZ
paRt # LEngtHLOaD
RatIngcaRtOn
SIZEOI-5000-12 12” 100lbs. 10PairsOI-5000-14 14” 100lbs. 10PairsOI-5000-16 16” 100lbs. 10PairsOI-5000-18 18” 100lbs. 10PairsOI-5000-20 20” 95lbs. 10PairsOI-5000-22 22” 90lbs. 10PairsOI-5000-24 24” 85lbs. 10PairsOI-5000-26 26” 50lbs. 10PairsOI-5000-28 28” 75lbs. 10Pairs
100 LB. FULL EXTENSION BALL BEARING SLIDE
F-287
PRODUCT FEATURES:•304gradestainlesssteel.•3memberfullextension.•Ballbearingconstruction.•Frontdisconnect.•Positivestop.•Sidemounting.•Nonhanded.•Screwssoldseparately.
OI-3800S SERIES
OI-4500S SERIES
PRODUCT FEATURES:•304gradestainlesssteel.•3memberfullextension.•Ballbearingconstruction.•Frontdisconnect.•Positivestop.•Sidemounting.•Nonhanded.•Fulltravel.•Screwssoldseparately.
75 lb. Capacity
100 lb. Capacity
PROFILE
PROFILE
PART #SLIDE
LENGTHTRAVELLENGTH
LOAD RATING PER PAIR
OI-3800S-8 7.87” 7.54” 98lbs.OI-3800S-10 9.84” 9.57” 92lbs.OI-3800S-12 11.81” 12” 88lbs.OI-3800S-14 13.78” 14” 84lbs.OI-3800S-16 15.75” 16” 79lbs.OI-3800S-18 17.72” 18” 75lbs.OI-3800S-20 19.69” 20” 73lbs.OI-3800S-22 21.65” 22” 68lbs.OI-3800S-24 23.62” 24” 64lbs.
PART #SLIDE
LENGTHTRAVELLENGTH
LOAD RATING PER PAIR
OI-4500S-10 9.84” 9.57” 115lbs.OI-4500S-12 11.81” 12” 111lbs.OI-4500S-14 13.78” 14” 108lbs.OI-4500S-16 15.75” 16” 104lbs.OI-4500S-18 17.72” 18” 100lbs.OI-4500S-20 19.69” 20” 97lbs.OI-4500S-22 21.65” 22” 95lbs.OI-4500S-24 23.62” 24” 92lbs.OI-4500S-26 25.59” 26” 90lbs.OI-4500S-28 27.56” 28” 87lbs.
SCREW PART #
SCR-8625PHZ#8 x 5/8” Pan
Head Zinc
SCREW PART #
SCR-8625PHZ#8 x 5/8” Pan
Head Zinc
STAINLESS STEEL FULL EXTENSIONDRAWER SLIDES
F-288
• Heavy Duty with 1” over travel extension, quick release brackets for quick drawer removal & anti rebound bumpers.
• 32mm screw mounting system.• Non-handed.• Side mount with mounting brackets included (1 left & 1 right).• Comparable with Accuride® 3640 and Knape & Vogt 8805.• 7/8” side clearance.
Product Features
SLIDE MOUNTING MEASUREMENTSLENGTHmm • inches
A mm • inches
B mm • inches
C mm • inches
D mm • inches
E mm • inches
F mm • inches
Gmm • inches
Hmm • inches
I mm • inches
J mm • inches
K mm • inches
L mm • inches
300 (12”) – 135.4 • 5.416” 179.1 • 7.164” 204.5 • 8.18” 229.9 • 9.20” 45.2 • 1.81” 190.5 • 7.62” 240.4 • 9.616” 152.4 • 6.10” – 20.2 • 0.81” 32.5 • 1.30”350 (14”) – 186.2 • 7.448” 229.9 • 9.196” 255.3 • 10.212” 280.7 • 11.23” 45.2 • 1.81” 190.5 • 7.62” 240.4 • 9.616” 152.4 • 6.10” – 20.2 • 0.81” 32.5 • 1.30”400 (16”) – 237.0 • 9.48” 280.7 • 11.228” 306.1 • 12.244” 331.5 • 13.26” 45.2 • 1.81” 190.5 • 7.62” 240.4 • 9.616” 152.4 • 6.10” – 20.2 • 0.81” 32.5 • 1.30”450 (18”) 190.5 • 7.62” 287.8 • 11.512” 331.5 • 13.26” 356.9 • 14.276” 382.3 • 15.29” 57.9 • 2.32” 266.7 • 10.67” 316.6 • 12.664” 203.2 • 8.13” – 32.9 • 1.32” 32.9 • 1.32” 500 (20”) 215.9 • 8.636” 338.6 • 13.544” 382.3 • 15.292” 407.7 • 16.308” 433.1 • 17.32” 57.9 • 2.32” 266.7 • 10.67” 316.6 • 12.664” 203.2 • 8.13” – 32.9 • 1.32” 32.9 • 1.32”550 (22”) 241.3 • 9.652” 389.4 • 15.576” 433.1 • 17.324” 458.5 • 18.34” 483.9 • 19.36” 70.6 • 2.82” 317.5 • 12.70” 367.4 • 14.696” 254 • 10.16” 171 • 6.84” 45.6 • 1.82” 45.6 • 1.82”600 (24”) 266.7 • 10.668” 440.2 • 17.608” 483.9 • 19.356” 509.3 • 20.372” 534.7 • 21.39” 70.6 • 2.82” 317.5 • 12.70” 367.4 • 14.696” 254 • 10.16” 171.1 • 6.84” 45.6 • 1.82” 45.6 • 1.82”650 (26”) 292.1• 11.684” 491.0 • 19.64” 534.7 • 21.388” 560.1 • 22.404” 585.5 • 23.42” 83.3 • 3.33” 393.7 • 15.75” 443.6 • 17.744” 330.2 • 13.21” 209.1 • 8.36” 58.3 • 2.33” 58.3 • 2.33”700 (28”) 317.5 • 12.7” 541.8 • 21.672” 585.5 • 23.42” 610.9 • 24.436” 636.3 • 25.45” 83.3 • 3.33” 393.7 • 15.75” 443.6 • 17.744” 330.2 • 13.21” 209.1 • 8.36” 58.3 • 2.33” 58.3 • 2.33”
Note: Measurements in Metric
MOUNTING SpECIFICATIONS
pROFILE:
MOUNTING SCREWS SOLD SEpARATELY
See page 267 for our complete screw line
pART # LENGTHTRAVEL LENGTH
mm • inchesLOAD
RATINGRECOMMENDED DRAWER WIDTH
CARTON SIZE
OI-74006-12 12” 330.2 • 13” 215 lbs. 12” 5OI-74006-14 14” 381 • 15” 210 lbs. 14” 5OI-74006-16 16” 431.8 • 17” 205 lbs. 16” 5OI-74006-18 18” 482.6 • 19” 200 lbs. 18” 5OI-74006-20 20” 533.4 • 21” 190 lbs. 20” 5OI-74006-22 22” 584.2 • 23” 180 lbs. 22” 5OI-74006-24 24” 635 • 25” 170 lbs. 24” 5OI-74006-26 26” 685.8 • 27” 160 lbs. 26” 5OI-74006-28 28” 736.6 • 29” 150 lbs. 28” 5
SCR-6625FHZ
200 LB. OVERTRAVEL SLIDES - CLEAR ZINC FINISH
HEAVY DUTY FULL EXTENSION SLIDES
F-289
• Single extension/Self closing.• Available Lengths: 10” to 28”.• White epoxy coated finish.• 1/2” Side Clearance.
SUPER STRONG100 LB LOAD RATING
@ 22”!
SIZEinches
DRAWER LENGTH
mm • inches
MIN. INTERNAL CAB. DEPTH
mm • inches
LOSS OF EXTENSIONmm • inches
10” 250 • 9-13/16” 253 • 9-15/16” 85 • 3-3/8”12” 300 • 11-13/16” 303 • 11-7/8” 85 • 3-3/8”14” 350 • 13-3/4 353 • 13-7/8” 85 • 3-3/8”16” 400 • 15-3/4” 403 • 15-7/8” 85 • 3-3/8”18” 450 • 17-3/4” 453 • 17-13/16” 95 • 3-3/4”20” 500 • 19-11/16” 503 • 19-13/16” 102 • 4”22” 550 • 21-5/8” 553 • 21-3/4” 110 • 4-5/16”26” 650 • 25-5/8” 653 • 25-3/4” 120 • 4-3/4”28” 700 • 27-1/2” 703 • 27-5/8” 135 • 5-3/8”
• Load rating: 100 lbs at 22”.• Double out-stop safety feature.• Locked-in position when extended.• 32 mm screw hole pattern system.• 3/4” Travel.• Blum compatible.
Product Features
Features include:• Self-close/Stay-closed action.• Load Capacity: 75 lbs.• 32mm system screw hole pattern.• Durable epoxy coated steel profiles.• Smooth & quiet nylon rollers.• Bottom mounting.• Drawer Extension (Travel):
Length of slide minus 1-1/2”.• 1/2” Side Clearance.
PROFILE:
$uperior Quality At Affordable Price$
note: Measurements in Metric
MOUNTING SCREWS SOLD SEPARATELY
see pages 267 for our complete screw line
PART # LENGTHLOAD
RATINGRECOMMENDED DRAWER WIDTH
CARTON SIZE
OI-H2030-10 10” 100 lbs. 10” 25 PairsOI-H2030-12 12” 100 lbs. 12” 25 PairsOI-H2030-14 14” 100 lbs. 14” 25 PairsOI-H2030-16 16” 100 lbs. 16” 25 PairsOI-H2030-18 18” 100 lbs. 18” 25 PairsOI-H2030-20 20” 100 lbs. 20” 25 PairsOI-H2030-22 22” 100 lbs. 22” 25 PairsOI-H2030-26 26” 80 lbs. 26” 25 PairsOI-H2030-28 28” 75 lbs. 28” 25 Pairs
(16 pieces required per pair)
SCR-6625FHZ
see PaGe 294 FOr rear MOuntinG BracKets and sPacers
PART # SIZERECOMMENDED DRAWER WIDTH
OI-1500-10 10” 10”OI-1500-12 12” 12”OI-1500-14 14” 14”OI-1500-16 16” 16”OI-1500-18 18” 18”OI-1500-20 20” 20”OI-1500-22 22” 22”OI-1500-24 24” 24”
PREMIUM EURO SLIDE
EURO SLIDES
F-290
EASY CLOSE DAMPENING CYLINDER
TOP RAIL
BOTTOM RAIL
•AmericA’sstAndArd-Ideally suited for “Standard” Cabinet Depths!•superior construction - Solid Delrin (Encased Steel Ball
Bearings) Bearings provides the best solution for heavy-weight full-extension movement!
•smooTh ACTION - Provides quite movement, even under heavy loads!•mAintenAnce FREE - (Note: Do not lubricate any part of the slide).•durAbility - LGA tested according to DIN 4554 Standards @ 50,000
cycles.•nodeflection in fully extended position!•ThetopslideprovidesLateralStability,thuspantrycontentswillnotfall
out when slide is engaged.•TheEZ CLOSE SYSTEM is an automatic/self-closing and slam resistant
function and will not be compromised by varying load conditions. During the last 75mm of the closing motion the pull-out is decelerated and then softly pulled completely closed.
•Horizontal&VerticalAdjustment.•FloorMounted(withTopSlide).•BackStopIncluded.•Material/Finish:Steel,SilverPowderCoated.•Top slide uses #6 countersink screws - bottom slide uses 1/4. 20Machinescrews&nutsand#8screwsnotincluded.
Load CapaCity:
250 Lbs
1.58”
.52”
2.36”
1” 1.46”
.08”1.48”.16”
.08”
1.56”
1.56”
.08”.08”
1.48”
BOTTOM SLIDE
TOP SLIDE
Ideally suited for standard cabinet depths
pRodUCt FEatUREs:
NEWNow
INcludedwith each
slide
PART # LENGTh EXTENSION WEIGhT
BY LBS.MM IN. MM IN.OI-771-22 575 22.64” 559 22.01” 19.27
PROGRESSIVE ACTION FULL EXTENSIONPANTRY PULL OUT SLIDE WITH TOP SLIDE
F-291
pRodUCt FEatUREs:•175lb.dynamic.•Delrinencasedsteelballbearings.•Quick&easyinstallationthroughpatentedsystem.•Quietmovement.•Integratedhorizontalandverticaladjustment.•Recommendedforcabinetheightsupto59.6”.•Maintenancefree,(Donotlubricateanypartoftheslide).•Double-sidedcaptiveprofile.•Material:Steel,whitepowdercoated.•Easyclosedeviceintegratedtobothtop&bottomslide.
LENGTh EXT A B C D E F G h I J KWEIGhT PER SET
MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN MM IN KG LBS400(16’) 15.75 385 15.16 133 5.24 261 10.28 357 14.06 - - 293 11.54 - - 133 5.24 165 6.50 261 10.21 293 11.54 306 12.05 4.90 10.78450(18”) 17.72 435 17.13 133 5.24 261 10.28 421 16.58 - - - - 357 14.06 133 5.24 165 6.50 261 10.21 293 11.54 306 12.05 5.40 11.88500 (20”) 19.69 485 19.10 165 6.50 325 12.78 453 17.84 - - - - 389 15.32 197 7.76 229 9.02 357 14.06 389 15.32 402 15.83 6.10 13.42550 (22”) 21.65 535 21.06 197 7.76 357 14.06 517 20.35 - - - - 453 17.84 197 7.76 229 9.02 357 14.06 389 15.32 402 15.83 6.60 14.52600(24”) 23.62 585 23.03 197 7.76 389 15.32 549 21.61 229 9.02 - - 485 19.09 197 7.76 229 9.02 357 14.06 389 15.32 402 15.83 7.15 15.73650(26”) 25.59 635 25.00 229 9.02 421 16.58 613 24.13 261 10.28 - - 549 21.61 197 7.76 229 9.02 357 14.06 389 15.32 402 15.83 7.75 17.05700(28”) 27.56 685 26.97 261 10.28 485 19.09 645 25.39 293 11.54 - - 581 22.87 197 7.76 229 9.02 357 14.06 389 15.32 402 15.83 8.25 18.15750 (30”) 29.53 735 28.94 261 10.28 485 19.09 709 27.91 325 12.78 - - 645 25.39 197 7.76 229 9.02 357 14.06 389 15.32 402 15.83 895 19.69pAcKinGunit:1setperboxwithmountinginstructions
PART # LENGThWEIGhT BY LBS.
OI-775-16 16” 11OI-775-18 18” 12OI-775-20 20” 13.5OI-775-22 22” 14.5OI-775-24 24” 16OI-775-26 26” 17OI-775-28 28” 18OI-775-30 30” 20
Load CapaCity:
175 Lbs
75 LB. FULL EXTENSION SOFT CLOSECONCEALED UNDERMOUNT SLIDE
F-292
OI-3600 SERIESMaterial: White Powder Coated Cold Rolled Steel
PRODUCT FEATURES:•Fullextensionwithsteelballbearings.•Neweasycloseautomaticselfclosing&slamresistant.•Versatile,worksinmostkitchenbasecabinets&givesuser flexibilityinconfigurationsofbins.•6-wayadjustablefrontbracketIsreversibleforanydoorapplication.
Floor Mount
Available in White
5349-18DM-2RV-18PB-1 RV-18PB-2-S
RV CONTAINERSShown with RV-DM-KIT
See pages 379-383
for our complete line of Waste Containers
Side Mount
PART # DESCRIPTIONWEIGHT
PER CARTONRV-18PB-1 14-7/8”Wx22”Dx19-1/4”HSingle35Qt.WasteContainer 13lbs.
RV-18PB2-S 14-3/8”Wx22”Dx19-1/4”HDouble35Qt.WasteContainerw/fullextension 14lbs.5349-18DM-2 14-7/8”Wx22”Dx19-1/2”HDouble35Qt.WhiteWasteContainer --
MOUNTINGTYPE
LENGTH EXTENSION LOAD CAPACITYPART # MM IN MM IN
OI-3600-F Floor 575 22.64” 575 22.64” 100lbs.OI-3600-S Side 575 22.64” 575 22.64” 100lbs.
PULL-OUT WASTE CONTAINERS
WASTE CONTAINER PULL-OUT SLIDES
F-293
Sides and fronts/backs are 5/8” solid edge glued birch components. Straight and true, our drawer components are finished with a durable UV coating and available in 6 sizes for any drawer application. Side lengths are 22” (558.8mm) and fronts/backs are 67” (1701.8mm). Drawer bottoms are also available in 5mm Birch Plywood (BIBB grade).
Height
R1/16 (R1.6mm)
9/32” (7.0mm)
33/64” (13.1mm)
5/8 (15.9mm)
Ends can be joined by gluing, nailing or cutting out dovetail joinery.
DRAWER SIDES, FRONTS, BACKS
Solid Birch Drawer Construction Components with Clear Catalyzed Finish (Natural Light)
Use on drawer fronts to provide realignment facility on fronts attached to 4-sided drawers. Housing is nylon with die cast threaded insert screw, plated steel. Housing is hammer driven into a 25MM prebored hole. Screw attaches 4th side of drawer to allow adjustment of front until fully tightened. Screw size is 7/8” x 8/32”. FEATURES: 2mm of adjustment in vertical or horizontal directions. 25mm hole boring in drawer front. Large head screw attachment to 4th side of drawer. Simple to use.
DRAWER FRONT ADJUSTER• Simple - Cost Effective
• Eliminates need for drawer slides• Ideally suited for applications limited in space
SpECIFICATIONS FOR RuNNER WhEEl Colors: Black & Brown
Drilled Hole Required: 8mm x 11mm deep
Requires 8mm x 11mm drilled hole
RUNNER WHEEL
DRAWER BOTTOM
DRAWER SIDESPART # HEIGHT LENGTH BOX QTY.
DS-2-BIR 2-1/2” 22” 20 pcs.DS-3-BIR 3-1/2” 22” 20 pcs.DS-4-BIR 4” 22” 20 pcs.DS-6-BIR 6” 22” 20 pcs.DS-8-BIR 8” 22” 10 pcs.
DS-10-BIR 10” 22” 10 pcs.* DS-10-BIR-NG 10” 22” 10 pcs.
* products with an NG part number are supplied with no groove and have a finished radius on both sides for custom heights.
DRAWER BOTTOMPART # HEIGHT LENGTH BOX QTY.DB-2160 21-7/8” 60” 3 pcs.
DRAWER FRONTS/BACKSPART # HEIGHT LENGTH BOX QTY.
DF-2-BIR-8 2-1/2” 96” 5 pcs.DF-3-BIR-8 3-1/2” 96” 5 pcs.DF-4-BIR-8 4” 96” 5 pcs.DF-6-BIR-8 6” 96” 5 pcs.DF-8-BIR-8 8” 96” 3 pcs.DF-10-BIR-8 10” 96” 3 pcs.
* DF-10-BIR-NG-8 10” 96” 3 pcs.* products with an NG part number are supplied with no groove
and have a square edge on both sides for custom heights.
PART # COLOR6310-BR Brown
PART # COLOROP-0900 Black
0900 Brown
FURNITURE ASSEMBLYFASTENERS & ACCESSORIES
P R O D U C T S
SOLID BIRCH DRAWER PARTS
F-294
REAR MOUNTSOCKET
METAL REAR MOUNTING BRACKETS
ADJUSTABLE UNDER MOUNT REAR SOCKET
FULL EXTENSIONDRAWER SLIDE SPACER
UNDER MOUNTDRAWER SLIDE SPACER
STANDARDDRAWER SLIDE SPACER
FIXED REAR SOCKETS
PRODUCT FEATURES:• Replaces commonly used block of wood for mounting drawer glides.• Can be used flush with face frame edge and mounted to back of drawer glide.• Can be used 2 per side in frameless cabinets to adjust drawer glides.
FIXED FULL EXTENSION REAR SOCKET
LEFTSOCKET RIGHT
SOCKET
WORKS WITH DRAWER SLIDE SETS:
OI-2030
WORKS WITH DRAWER SLIDE SETS:
OI-2030
WORKS WITH DRAWER SLIDE SETS:
OI-5000
WORKS WITH DRAWER SLIDE SETS:
OI-4634, OI-9400, OI-4500S, OI-4070
WORKS WITH DRAWER SLIDE SETS:
OI-4634, OI-9400, OI-4500S, OI-4070
WORKS WITH DRAWER SLIDE SETS:
OI-1500, OI-H2030
WORKS WITH DRAWER SLIDE SETS:
OI-1500, OI-H2030
WORKS WITH DRAWER SLIDE SETS:
OI-1500, OI-H2030
WORKS WITH DRAWER SLIDE SETS:
OI-4634, OI-9400
All bumpers stocked in clear. Please inquire for colors. Colors sold in full cases only.
1000 PIECE MINIMUM ORDER
PAB-001 PAB-002PAB-003
PAB-006PAB-106
PAB-008PAB-012PAB-112
PAB-078
PAB-018PAB-023
PAB-044 PAB-009
MILLER FASTBLOCK™MILLER FASTBLOCK™
PART # DESCRIPTIONFC-MFB-WH Miller Fast Block 2 pc. pack
FC-MFB-WH-100 Miller Fast Block 100 pc. pack
OI-3616
OI-RMB
OI-5000B-SOI-RMB-S OI-6402
OI-627 OI-680
OI-3640 OI-3602
PART # WIDTH HEIGHT CASE QUANTITYPAB-001CL .500” .140” 5000PAB-002CL .312” .085” 5400PAB-003CL .440” .200” 5082PAB-006CL .375” .150” 7200PAB-008CL .500” .120” 5000PAB-009CL .880” .400” 1440PAB-012CL .500” .140” 5000PAB-018CL .500” .230” 5000PAB-023CL .810” .300” 2646PAB-044CL .750” .160” 2450PAB-078CL .400” .0130” 7200
SOFT SERIES -Softer bumper for extra sound deadening properties
PAB-106CL .375” .150” 7200PAB-112CL .500” .140” 5000
DRAWER SLIDE SPACERS
REAR MOUNT SOCKETS
SPACERS
POLYURETHANE ADHESIVE BUMPERS
NEW!
F-295
PRODUCT FEATURES:• Face frame hinges with 3-dimensional adjustment.• 42mm drilling pattern.• 1 piece hinge and base plate combination.• For door thickness up to 3/4”.• Front locating tabs position hinge on face frame.• Available with either wrap around or side mount base plate.
DRILLING DEPTH 7/16” (10.5mm)
42mm DRILLING PATTERN
TEC 864 ONE PIECE HINGE108º OPENING ANGLE - 1/4” TO 1” OVERLAY
FOR FACE FRAME APPLICATIONS
PRODUCT FEATURES:• Works for face frame cabinets on all overlays and frameless cabinets on full overlay doors.• Brushed nickel finish blends well with hinge finish.• Manually adjustable to desired closing speed.• Mounts easy in corners with #6 x 3/4” wood screws included.• 11/16” (17mm) Clearance required.• Ideal when upgrading existing cabinets or working with other hinges options.
WRAP AROUNDPART# OVERLAY PLATE TYPE
VS8-108-25W 1/4”
DOWELLED
VS8-108-50W 1/2”VS8-108-75W 3/4”VS8-108-100W 1”VS8-108-125W 1-1/4”VS8-108-138W 1-3/8”VS8-108-150W 1-1/2”VS-108-25W 1/4”
SCREW-ON
VS-108-50W 1/2”VS-108-75W 3/4”VS-108-125W 1-1/4”VS-108-138W 1-3/8”VS-108-150W 1-1/2”
SIDE MOUNTPART# OVERLAY PLATE TYPE
VS8-108-25S 1/4”
DOWELLED
VS8-108-50S 1/2”VS8-108-75S 3/4”VS8-108-100S 1”VS8-108-125S 1-1/4”VS8-108-138S 1-3/8”VS8-108-150S 1-1/2”VS-108-25S 1/4”
SCREW-ON
VS-108-50S 1/2”VS-108-75S 3/4”VS-108-100S 1”VS-108-125S 1-1/4”VS-108-138S 1-3/8”VS-108-150S 1-1/2”
PART# DESCRIPTIONUNI-SFT Individual Polybag
UNI-SFT-25 25 piece bag
UNI-SOFT SOFT CLOSE ADAPTOR
HINGES
F-296
DOWELED (Knock-In)
PRODUCT FEATURES:• All Metal, Nickel Plated, self closing hinges.• Full overlay, half overlay, and in-set options.• Screw-on or doweled (knock-in) options available.• All hinges work with soft close system - see individual charts below.• Plate options available for Face Frame or Frameless applications.
SCREW-ONBORING PATTERN
DOWELEDOVERALL CUP SIDE VIEW
Mimimum cup depth11mm or .44”
SCREW-ON
100° OPENINGSPECIFICATIONS:
INSET
FULL OVERLAY
HALF OVERLAY INSET
FULL OVERLAY
HALF OVERLAY
Door Size Guidelines
Hinges
• Works with up to 7/8” (22mm) thick door.
* INSTALLATION DIMENSIONS AVAILABLE UPON REQUEST. ALL MEASUREMENTS ARE IN MILLIMETERS.
PLATES FOR FACE FRAME APPLICATIONS
PLATES FORFRAMELESS APPLICATIONS
SOFTCLOSE
A, B, C D, E See Option A, pg. 301
PLATES FOR FACE FRAME APPLICATIONS
PLATES FORFRAMELESS APPLICATIONS
SOFTCLOSE
A, B, C D, E See Option A, pg. 301
NEXIS CLICK-ON QUICK MOUNTING HINGES
PART# DESCRIPTIONPCS. PER CARTON
CS4-100S-F Full Overlay (00) 250CS4-100S-H Half Overlay (08) 250CS4-100S-I Inset (15) 250
PART# DESCRIPTIONPCS. PER CARTON
CS4-100D-F Full Overlay (00) 250CS4-100D-H Half Overlay (08) 250CS4-100D-I Inset (15) 250
CS-SCREW6 x 5/8” Zinc Plated Screw 500 pcs. per carton
HINGES
F-297
FULL OVERLAY HALF OVERLAY FULL OVERLAY HALF OVERLAY
FULL OVERLAY
HALF OVERLAY
FULL OVERLAY
HALF OVERLAYINSET INSET
SCREW-ONBORING PATTERN
DOWELEDOVERALL CUP SIDE VIEW
Mimimum cup depth11.8mm or .47”
125° OPENINGSPECIFICATIONS:
• Works with up to 3/4” (19mm) thick door.
COMPARABLE TO BLUM
SCREW-ONBORING PATTERN
DOWELEDOVERALL CUP SIDE VIEW
Mimimum cup depth11mm or .44”
110° OPENINGSPECIFICATIONS:
• Works with up to 25/32” (20mm) thick door.
COMPARABLE TO BLUM
* INSTALLATION DIMENSIONS AVAILABLE UPON REQUEST. ALL MEASUREMENTS ARE IN MILLIMETERS.
PLATES FOR FACE FRAME APPLICATIONS
PLATES FORFRAMELESS APPLICATIONS
SOFTCLOSE
A, B, C D, E See Option A, pg. 301
PLATES FOR FACE FRAME APPLICATIONS
PLATES FORFRAMELESS APPLICATIONS
SOFTCLOSE
A, B, C D, E See Option A, pg. 301
PLATES FOR FACE FRAME APPLICATIONS
PLATES FORFRAMELESS APPLICATIONS
SOFTCLOSE
A, B, C D, E See Option A, pg. 301
PLATES FOR FACE FRAME APPLICATIONS
PLATES FORFRAMELESS APPLICATIONS
SOFTCLOSE
A, B, C D, E See Option A, pg. 301
DOWELED (Knock-In)SCREW-ON
DOWELED (Knock-In)SCREW-ON
NEXIS CLICK-ON QUICK MOUNTING HINGES
PART# DESCRIPTIONPCS. PER CARTON
CS22-110S-F Full Overlay (00) 250CS22-110S-H Half Overlay (08) 250CS04-110S-I Inset (15) 250
PART# DESCRIPTIONPCS. PER CARTON
CS22-110D-F Full Overlay (00) 250CS22-110D-H Half Overlay (08) 250CS04-110D-I Inset (15) 250
PART# DESCRIPTIONPCS. PER CARTON
CS29-125S-F Full Overlay (00) 250CS29-125S-H Half Overlay (08) 250
PART# DESCRIPTIONPCS. PER CARTON
CS29-125D-F Full Overlay (00) 250CS29-125D-H Half Overlay (08) 250
CS-SCREW6 x 5/8” Zinc Plated Screw 500 pcs. per carton
HINGES
F-298
EASY TO INSTALL!1. Insert Twin NT hinges
into the door boring.2. Close the flap of the
hinge cup, and you are done!
PRODUCT FEATURES:• Twin NT hinges are perfect for door materials such as Particle Board, Solid Wood and MDF.• Twin NT securely fits and does not allow twisting of the hinge due to a 3-point connection of the hinge cup.• All Metal Nickel Plated, self closing hinges.• Full Overlay and Half Overlay options.• All hinges work with Soft Close-see individual charts below.• Plate Options available for Face Frame and Frameless Options.
1. 5.4.3.2.
FITS BOTH HOLE PATTERNS
HALF OVERLAYFULL OVERLAY
ALL MEASUREMENTS ARE IN MILLIMETERS.
170° OPENINGCOMPARABLE TO BLUM
SCREW-ONBORING PATTERN
DOWELEDOVERALL CUP SIDE VIEW
Maximum Cup Depth is 11.5mm or .46”
110° OPENINGSPECIFICATIONS:
• Works with up to 25/32” (20mm) thick door.
PLATES FOR FACE FRAME APPLICATIONS
PLATES FORFRAMELESS APPLICATIONS
SOFTCLOSE
A, B, C D, E See Option B, pg. 301
SCREW-ON DOWELED (Knock-In)
100% FINGERPROTECTION
FULL OVERLAY HALF OVERLAY FULL OVERLAY HALF OVERLAY
SCREW-ONBORING PATTERN
DOWELEDOVERALL CUP SIDE VIEW
Mimimum cup depth11mm or .44”
SPECIFICATIONS:
• Works with up to 1” (26mm) thick door.
PLATES FOR FACE FRAME APPLICATIONS
PLATES FORFRAMELESS APPLICATIONS
SOFTCLOSE
A, B, C D, E See Option A, pg. 301
PLATES FOR FACE FRAME APPLICATIONS
PLATES FORFRAMELESS APPLICATIONS
SOFTCLOSE
A, B, C D, E See Option A, pg. 301
• Does not work with CS-SOFT
NEXIS CLICK-ON QUICK MOUNTING HINGES
CS-SCREW6 x 5/8” Zinc Plated Screw 500 pcs. per carton
PART# DESCRIPTIONPCS. PER CARTON
CST22-110-F Full Overlay (00) 125CST22-110-H Half Overlay (08) 125
PART# DESCRIPTIONPCS. PER CARTON
CS65-170D-F Full Overlay (00) 250CS65-170D-H Half Overlay (08) 250
PART# DESCRIPTIONPCS. PER CARTON
CS65-170S-F Full Overlay (00) 250CS65-170S-H Half Overlay (08) 250
NEXIS IMPRESSOWITH “TOOL-LESS” QUICK MOUNTING TECHNOLOGY
HINGES
F-299
FULL OVERLAY HALF OVERLAY
100% FINGERPROTECTION
FULL OVERLAY HALF OVERLAY
* INSTALLATION DIMENSIONS AVAILABLE UPON REQUEST. ALL MEASUREMENTS ARE IN MILLIMETERS.
PLATES FOR FACE FRAME APPLICATIONS
PLATES FORFRAMELESS APPLICATIONS
SOFTCLOSE
A, B, C D, E See Option B, pg. 301
SCREW-ONBORING PATTERN
DOWELEDOVERALL CUP SIDE VIEW
Minimum Cup Depth is 12mm or .48”
125° OPENINGSPECIFICATIONS:
• Works with up to 3/4” (19mm) thick door.FITS BOTH HOLE PATTERNS
PLATES FOR FACE FRAME APPLICATIONS
PLATES FORFRAMELESS APPLICATIONS
SOFTCLOSE
A, B, C D, E See Option B, pg. 301
SCREW-ONBORING PATTERN
DOWELEDOVERALL CUP SIDE VIEW
Minimum Cup Depth is 11mm or .44”
170° OPENING
• Works with up to 1” (26mm) thick door.FITS BOTH HOLE PATTERNS
NEXIS IMPRESSOWITH “TOOL-LESS” QUICK MOUNTING TECHNOLOGY
PART# DESCRIPTIONPCS. PER CARTON
CST65-170-F Full Overlay (00) 50CST65-170-H Half Overlay (08) |50
CS-SCREW6 x 5/8” Zinc Plated Screw 500 pcs. per carton
PART# DESCRIPTIONPCS. PER CARTON
CST29-125-F Full Overlay (00) 125CST29-125-H Half Overlay (08) 125
HINGES
F-300
• Nickel Plated.• Adjustments can be made independently: up and down.
D. SUPER CLICK
E. 3D ADJUSTABLE EURO CAM
• Nickel Plated.• 6 way adjustment: up and down, in and out, and side to side.• Height and depth adjustable.
B. 3D CAMPLATE
A. SPECIAL PLATE FOR FACE FRAME
C. BEADED INSET
• Height and depth adjustable.• Mounts with wood screws (not included).
• All adjustments can be made independently.• Mounts with wood screws (not included).
* INSTALLATION DIMENSIONS AVAILABLE UPON REQUEST. ALL MEASUREMENTS ARE IN MILLIMETERS.
NEXIS MOUNTING PLATESNEXIS MOUNTING PLATES
Boring distance will affect overlay result; always
prepare a mock up before boring doors.
HINGES FULL - 00 HALF - 08 INSET - 15
FRAMELESSPLATES
“00” Full - 3/4” Half - 3/4” Inset“02” Full - 5/8” Half - 5/8” Inset“08” Half Inset N/A“18” Inset N/A N/A
FACE FRAMEPLATES
“00” 5/8” - 3/4” 3/8” N/A“04” 1/2” 1/4” N/A“02” N/A Inset N/A
PLEASE REFER TO CHART BELOW WHEN PURCHASING PLATES FOR HINGES DIFFERENT COMBINATIONS WILL YIELD DIFFERENT RESULTS
NEXIS MOUNTING PLATES
PART#HINGE TYPE
DOOROVERLAY
PLATE TYPE
PCS. PER CARTON
CSP-FR55-00 Click-on Twin Full, Half, Inset “00” 250CSP-FR55-08 Click-on Twin Half, Inset “08” 250CSP-FR55-18 Click-on Twin Inset Only “18” 250
PART#HINGE TYPE
DOOROVERLAY
PLATE TYPE
PCS. PER CARTON
CSP-FR70-00 Click-on Twin Full, Half, Inset “00” 250CSP-FR70-08 Click-on Twin Half, Inset “08” 250
PART#HINGE TYPE
DOOROVERLAY
PLATE TYPE
PCS. PER CARTON
CSP-FF88-00 Click-on Twin 1/8” to 3/4” “00” 250CSP-FF88-04 Click-on Twin 1/8” to 3/4” “04” 250
PART#HINGE TYPE
DOOROVERLAY
PLATE TYPE
PCS. PER CARTON
CSP-FF91-00 Click-on Twin 1/8” to 3/4” “00” 250CSP-FF91-04 Click-on Twin 1/8” to 3/4” “04” 250
PART#HINGE TYPE
DOOROVERLAY
PLATE TYPE
PCS. PER CARTON
CSP-FF90-02 Click-on Twin Inset “02” 250
CS-SCREW6 x 5/8” Zinc Plated Screw 500 pcs. per carton
FOR FRAMELESS APPLICATIONS
FOR FACE FRAME APPLICATIONS
HINGES
F-301
OPTION A: SOFT CLOSE FOR CS* HINGES
EACH SET INCLUDES:1 Soft Close CS adapter with pre-mounted Soft Close.1 hinge cup cover cap.2 hinge arm cover caps.
OPTION B: SOFT CLOSE FOR CST* HINGES
EACH SET INCLUDES:1 Soft Close CST adapter.1 Soft Close CST damper.2 hinge arm cover caps.
* INSTALLATION DIMENSIONS AVAILABLE UPON REQUEST. ALL MEASUREMENTS ARE IN MILLIMETERS.
This unique design defines a new closing of doors. The motion of the doors is softly slowed down and the door self closes softly and quietly. • Toolless. • Quick and easy to install. • Minimum one set required per two hinges.
DOWELED (Knock-In)
FULL OVERLAY
PLATES FOR FACE FRAME APPLICATIONS
PLATES FORFRAMELESS APPLICATIONS
SOFTCLOSE
A, B, C D, E See Option A, above.
PLATES FOR FACE FRAME APPLICATIONS
PLATES FORFRAMELESS APPLICATIONS
SOFTCLOSE
A, B, C D, E See Option A, above.
HALF OVERLAY INSET
45° CORNER
90° CORNER PIE CUT CORNER
BORING PATTERN OVERALL CUP SIDE VIEWSPECIFICATIONS:
BORING PATTERN OVERALL CUP SIDE VIEWSPECIFICATIONS: CS/D-PCC
BORING PATTERN OVERALL CUP SIDE VIEWSPECIFICATIONS: CS/45-IV & CS/90-IV
Works with doors up to 1-1/8” thick.
NOTE: DOES NOT WORk WITH 170° HINGES
95° OPENING FOR THICK DOORS DOWELED (Knock-In)
SOFT CLOSE SYSTEM
PART# CS-SOFT1 setFull Carton (125 sets)
PART# CST-SOFT1 setFull Carton (125 sets)
CS-SCREW6 x 5/8” zinc plated screw for “CS” hinges.500 per carton
CS-SCREW6 x 5/8” Zinc Plated Screw 500 pcs. per carton
PART# DESCRIPTIONPCS. PER CARTON
CS5/45-IV 45° Corner 125CS5/90-IV 90° Corner 125CS/D-PCC Pie Cut Corner 125
PART# DESCRIPTIONPCS. PER CARTON
CS5-95D-F Full Overlay (00) Thick Door 250CS5-95D-H Half Overlay (08) Thick Door 250CS5-95D-I Inset (15) Thick Door 250
SPECIALITY HINGES
CORNER HINGES
HINGES
F-302
CONCEALED METAL HINGE
OPI SERIES - SOFT CLOSE PNEUMATIC HINGE
The CONCEALED METAL HINGE is surface mounted - this means no routing of door or cabinet. Made of cold rolled steel with a bright nickel finish and a stainless steel spring. All pins & rivets are zinc plated for long life.
ONE HINGES DOES IT ALL; FITS ANY FRAME-LESS CABINET.
• Overlay, adjustable from 0 to 3/4".• 3/8" inset.• Full inset.• Allows door to open over 150°.• Built-in closing mechanism.• Screws not included.
3/4" OVERLAY FULL INSET 3/8" INSET
*Application drawings are based on use with a 3/4" thick door.
*AppLIcATIONS:
pRODUcT FEATURES:• Softens the impact of the door against
the cabinet.• Can be recessed into the cabinet side or
mounted to the table.• Suitable for double doors, inset doors &
face frame applications.• Use 2 dampers for door heights over 3’.
MEDIUM DUTY
SIDE MOUNTED
RECESSED
CLIP-ON SOFT CLOSE HINGE ATTACHMENTpRODUcT FEATURES:• Grey plastic.• Left and Right side.• Can be adjusted for various door clearances.• Suitable for most Euro Hinges.
pRODUcT FEATURES:• NO MORE SLAMMED DOORS! Pneumatic cylinder provides soft closing action.• NO EXTRA ACCESSORIES! Built-in cylinder makes closing doors easy.• Clip on system.• Screws included.
PART#SG-225
PART#SFT-MAD-GY
PART# DESCRIPTIONSFT-CLIP-R RightSFT-CLIP-L Left
PART# DESCRIPTION
SFT-HINGE-F 110° Full Overlay Hingewith Plate
MISCELLANEOUS HINGES
DAMPING ACCESSORIES FOR CABINET DOORS
SOFT CLOSE DAMPERS
F-303
1/2” OVERLAY INSTITUTIONAL HINGE
* 2 screws required for
hinge arm mounting
• All metal diecast construction for extreme durability in black & nickel finishes.
• Toolless snap-on mounting for quick & easy installation.
• Side-to-Side adjustment of -2mm(1/16”) & height adjustment of +/-2mm(1/16”).
• Hinge cup has 35mm diameter with a 45/9.5mm boring pattern (similar to Blum).
• Designed for Frameless Cabinet Construction.
32mm OVERLAY INSTITUTIONAL HINGEGloss White, Gloss Black, Dull Chrome
DOUBLE ACTION SPRING HINGE
• Allows door to swing back and forth.• For doors up to 1-1/8" thick.• Screws & instructions included.• Dimensions: 4-7/8" high x 3-1/2" wide.
NO-BORE GLASS DOOR HINGE
• For 1/4” Glass.
• Opening angle 90°.• For flap door thickness up to 20mm.• Cup boring cover.• Bottom and Flap door are flush inside
the cabinet when doors are open.• 3-D Adjustable.
FLAP DOOR HINGE
• 2-3/4” Five Knuckle Hinge.
• Designed for 32mm hole system.
• Radius ground hospital tips.
• Matte Chrome finish.
Made in USA.
• 2 3/4" Five Knuckle Hinge.• Radius Ground Hospital Tips
For Increased Safety.• Designed for 32mm Hole
System.• Radius Corners For Easy
Mortising• ANSI/BHMA A156.9 Grade 1.
44 lb. Load
RatingMaterial: Steel Material: Steel
Material: Steel Material: SteelMaterial:
Steel
• Opening angles range from 180° - 270° depending on your application.
• Meets ANSI/BHMA A 156.9 - 2003 Grade 1 Requirements when the screw & adjustment tabs are in place.
• Cover caps (included) conceal mounting screws.
• One hinge cup works arms.
PRODUCT FEATURES:
PART #TYPE BLACK NICKEL
HINGE CUP SCREW-ON MBS-8010-BK MBS-8010-NDOWELLED MBD-8010-BK MBD-8010-N
FULL OVERLAY HINGE ARM 270° MB-8310-BK MB-8310-N
HALF OVERLAY HINGE ARM 230° MB-8510-BK MB-8510-N
COMMON PANEL (INSET) HINGE ARM 180° MB-8610-BK MB-8610-NEURO-SCREWS FOR
HINGE ARM N/A MB-SCREW*#6 x 13.5mm Euro Screw
PART#DIMENSIONS
A B CIH-E60- 3/4" 3/4" 23/32"IH-G60- 3/4" 13/16" 23/32"
PART# COLORDAH-BRS BrassDAH-BLK Black
PART # COLOR30023-CHR Chrome
PART#PCS. PER CARTON
FLAP-735 100
DIMENSIONSPART# A B C
INSHIN-34 3/4” 3/4” 23/32”
GRASS INSTITUTIONAL HINGES
F-304
So! Where do you want the holes?Euro-32
TemplateConcealed-Hinge
Boring Tool
Euro-Handle-ItHandle & Knob Drilling Tool• V-notch in fence for use in installing
handles at a 45-degree angle.• English and metric scales for use on all
handles.• Height adjustment to center of a 12” high
drawer front.• Center reference line for extra wide
drawer fronts.• Movable positioning stop for use on
drawer fronts of the same size.• Installs handles as large as 24” (600mm).• Made of polycarbonate (jet aircraft canopy
material). The tool is virtually unbreakable.EHIT
Euro-JigConcealed Hinge Installation Tool• Quickly and accurately locates European
concealed hinge plates.• Lightweight, durable construction.• Will locate all makes of concealed hinges
regardless of cup size.• “V” locator templates set to door hinge arm,
then transfers layout to cabinet.• Minimal setup time allows for changing hinge
locations quickly.• Works for overlay and inset conditions.• Will effectively set doors up to 50” tall.• Length, 28-3/4”, designed to clear existing
countertops make Euro-Jig ideal for refacing operations.
• Requires Euro-Bit Self-Centering Drilling Tool (EB)
EJ200
Euro-UniguideFor fast, accurate drawer guide positioning• Locates pilot holes for all brands of drawer guides:
European and American made.• Infinite vertical adjustment for various drawer sizes
and layouts.• For use with regular and full extension guides.• Positions guides for overlay and inset conditions.• Install 1 to 4 guides in a single operation.• No vertical layout marks required as tool is set
directly to tape measure.• Length, 28-3/4”, designed to clear existing counter-
tops, making Uniguide ideal for refacing operations.• Requires Euro-Bit Self-Centering Drilling Tool & Bit.EUG
Euro Trimmer• Laminate trimmer with
Teflon® square bearing. ET 1/2” Dia. x 1/4” Shank ET3/4 3/4” Dia. x 1/4” Shank
Replacement BearingsET1/2-Bearing1/2” Bearing OnlyET3/4-Bearing3/4” Bearing Only
Euro-BitSelf-Centering Drilling Tool• Use with other tools shown.• Tip has excellent chip ejection.• Interchangeable bits: 1/4” Bit – 1/4” shelf pins. 5mm Bit – 5mm shelf pins or system screws. 7/64” Bit Adapter – designed to be used with standard 7/64”
bit (not included).• Uses carbide tipped brad point bits or a
7/64” bit (not included).EB (EURO BIT)EB2570 (1/4” X 7mm Bit)EB570 (5mm x 70mm Bit)7/64 x 40mm (7/64” x 40mm Bit adaptor)
• Use with any 3/8” drill motor or drill press.• Compact and portable, ideal for shop and
field operations.• Automatic boring depth stop.• Special non-skid base protect work and
inhibits movement during boring operation.• Centerline mark provides easy alignment.• 32mm compatible.• Uses standard 35mm x 37 mm boring bit,
not included.ED50-UED-KIT (drill press kit)ED3557 (35mm x 57mm Bit)
Euro-32 Template• To Drill 5mm or 1/4” holes.• Use on cabinet parts or
constructed cabinets.• Use with the Euro-Bit Self-
Centering Drilling Tool (EB).• Drill for carcass assembly.• Use for 32mm construction.• Aluminum bushings for
long life.E32T ....
MOUNTING TEMPLATES & BORING TOOLS
F-305
For Our Complete Line
Of Screws See Page 267
AVAILABLE FINISHES: Nickel, Brite Brass, *304 Grade Stainless Steel, Statuary Bronze, Electro Black Lacquered
4 SIZES:1-1/4"x 72", 1-1/2" x 72", 2" x 72" & 1-1/4" x 100'
A
B C
D
Steel Pin
NOTE: All measurements are approximate; please refrain from drilling your holes
until product is received.
Electro Black
Laquered (BLQ)
Statuary Bronze (BZ)
304 Grade
Stainless Steel (SS)
Nickel (N)
Brite Brass (B)
72 screws are required per piece.
DIMENSIONSA B C D
1 1-1/4" 2" 1/2" .750"2 1-1/2" 2" 1/2" .876"3 2" 2" 1/2" 1.13"4 1-1/4" 2" 1/2" .75"
PIANO HINGE FLAT PHILLIPS SCREWS
If you are interested in aluminum hinges or
custom lengths, please inquire.
1-1/4" x .030* x 72"PART # FINISH
PH-28-72N NickelPH-28-72B Brite Brass
PH-28-72BZ Statuary Bronze
PH-28-72BLQ Electro Black Lacquered
PH-28-72SS *304 Grade Stainless Steel
1-1/2" x .040* x 72"PART # FINISH
PH-40-72N NickelPH-40-72B Brite Brass
PH-40-72BZ Statuary BronzePH-40-72BLQ Electro Black
Lacquered
PH-40-72SS *304 Grade Stainless Steel
2" x .040* x 72"PART # FINISH
PH-64-72N NickelPH-64-72B Brite Brass
PH-64-72BZ Statuary BronzePH-64-72BLQ Electro Black
Lacquered
PH-64-72SS *304 Grade Stainless Steel
* All Stainless Steel Hinges are .037" Thick
100 FT. COILS1-1/4" x .030" x 100' PART # FINISH
PH-28-100N NickelPH-28-100B Brite Brass
SOLD IN FULL COILS ONLY!
PART # FINISH WORKS WITH HEAD SIZESCR-5625FHZ Zinc all piano hinges
except PH-*-72SS#5 x 5/8"
SCR-5625FHB Black #5 x 5/8"SCR-6625FHZ Zinc only PH-*-72SS
(stainless steel hole is larger)#6 x 5/8"
1
2
3
4
CONTINUOUS STEEL PIANO HINGE
F-306
MONSTER HINGE™
TOTALLY CLEAR FLAT HINGES EXTRUDED HINGE
• Replacesmetalhingesthatrequireontodrill,taporrivet.
• Outerbondingsurfaceiswideforaddedbondingstrength.
• Easilycutstosmallsizewithoutfallingapart.
Clear or Black 12” Long x 1-3/4” Wide
PLASTIC PIANO HINGE ACRYLIC HASPClear, Black or White
2-3/8” Long x 1-1/16” Wide x 1/8” ThickBottomsectionofhaspisreversibleforeithercorner
orflatmounting.
Predetermine assembly before inserting pin
completely!
PLASTIC HINGES
CLEAR ACRYLIC/PVC5 Ft. Lengths
CLEAR P.E.T.G./PVC with glue groove5 Ft. Lengths
1.375
.50 .50.375
CLEAR URETHANE & ACRYLIC4 Ft. Lengths U.V. Stabilized for Outdoor Use!
CLEAR ACRYLIC HINGE POLYPROPYLENE HINGE
Won’t Rust - Quiet - Long Life
175-150150-1375END VIEW
TOP VIEW
Larger Quantities Available - Please Inquire
CLEAR ECONOMY ACRYLIC HINGE
END VIEW
TOP VIEW
Black or WhiteScrew Size Recommended
#10 Countersunk (not included)
Material: Acrylic DR101 (Clear), ABS (Black)Indestructible:New“patentpending”designmakesthishingevirtuallyunbreakable!Noothersimilarhingeonthemarketcomesclosetothestrengthofthisdynamichinge!Ribbed:Wehaveeliminatedthebarrelsection,theweakestpartofahinge,andreplacedwithlargeribbedsectionsunlikeanyhingeinthedisplayindustryforincrediblestrength!Largerpindiameter(.190”dia.)too!Size:1-5/16”Lx2”Wx1/2”T(33mmx51mmx13mm)
PART # MATERIALPH-175-12CL AcrylicPH-175-12BK ABS
PART # COLORHSP-110-CL ClearHSP-110-BK BlackHSP-110-WH White
PART #9888H
PART #F2000-CL
PART #696H
PART #150-1375175-150
PART # COLOR200-200-WH White200-200-BK Black
PART #EC175-150
PART # DESCRIPTIONMONSTER-HINGE-CL ClearAcrylic1-5/16”Lx2”Wx1/2”ThickHingeMONSTER-HINGE-BK BlackABS1-5/16”Lx2”Wx1/2”ThickHinge
HINGES
F-307
103-571- Fits 3/16” Panels 103-635- Fits 1/4” Panels 103-637- Fits 3/8” Panels 103-4175- Fits 1/2” Panels
P4440-CL Fits 1/4” PanelsP4506-CL Fits 3/16” Panels108-640- Fits 1/8” Panels
PVCBlack, White & Clear
PVCBlack, White & Clear
108-641- Fits 3/16”-1/4” Panels
PVC - ClearClear with White Web
PVC - ClearClear with White Web
103-631- For 1/2” Panel 103-630- For 5/8” Panel 103-632- For 3/4” Panel
USE S055 SLOTTER USE S1/S7 SLOTTER USE S1/S7 SLOTTER
Polypropylene12 Ft. Lengths
Black, White & Brown
Polypropylene12 Ft. Lengths
Black, White & BrownPolypropylene12 Ft. Lengths
Black, White & Brown
Polypropylene12 Ft. Lengths
Black, White & Brown
Polypropylene12 Ft. Lengths
Black, White & Brown
Polypropylene12 Ft. Lengths
Black, White & Brown
Polypropylene12 Ft. Lengths
Black, White & Brown
103-639-
9888H 696H
.035/.045 Thick - Polypropylene100 & 500 Ft. Coils
Black, White & Brown
103-638-P4169-CL
.086 Thick - PVC100 Ft. Coils - Clear with White Web
.062/.070 Thick - Polypropylene100 & 500 Ft. Coils
Black, White & Brown
Polypropylene12 Ft. Lengths
Black, White & Brown
103-634- Fits 1/8” Panels
CLEAR ACRYLIC/PVC5 Ft. Lengths
CLEAR P.E.T.G./PVC with glue groove
5 Ft. Lengths
PLASTIC TEE HINGE
FLAT HINGE
PLASTIC PANEL HINGE
F-308
4”
.4”
10.4”90°
3.60”
.4”
10.2”
3.2”
.4”
10”
8mm
15mm
InstallatIonDoor Weight
2 -3 kg(5 - 7 lb)
3.5 - 4.5 kg(8 - 10 lb)
5 -6 kg(11 - 13 lb)
Door Height Force Force Force254 - 305 mm(10 - 12 in)
100 N(22.5 lb)
100 N(22.5 lb)
100 N(22.5 lb)
330 - 380 mm(13 - 15 in)
100 N(22.5 lb)
100 N(22.5 lb)
150 N(33.7 lb)
406 - 457 mm(16 - 18 in)
100 N(22.5 lb)
100 N(22.5 lb)
150 N(33.7 lb)
483 - 533 mm(19 - 21 in)
100 N(22.5 lb)
150 N(33.7 lb)
559 - 610 mm(22 - 24 in)
100 N(22.5 lb)
150 N(33.7 lb)
Gas Springs Selection Guide
PRODUCT FEATURES:This multipurpose stay can be used on “Drop Down” and “Lift up Doors”.• This stay will open as wide as 100°, depending on the adjustment this stay “brakes” the door as it holds in intermediate positions.• Adjustments can be made using a 4mm allen key.• 1 piece recommended for doors under 8 lbs. and 2 pieces for doors ranging from 8 lbs. to 16 lbs.• Non-handed.• Chrome plated, all metal construction.
Can be used for either frameless or framed cabinet applications. Opening angle can be adjusted from 45°-90°
4.24”
1.28”
.48”6.4”
1.28”.4”
1.28”
.48”
PRODUCT FEATURES:• Suitable for face frame and frameless applications.• Suitable for wood and aluminum doors.• No lubrication required, (notE: If lubricated, product will not operate properly).• Set includes: 2 gas springs, 2 sets of mounting brackets and screws.• Finish: Silver, all metal construction.
10.8”3.6” 4.8”
.24” .6”
2.04”1.20”
.4”.24”
.08”
1”.3”1.28”
1.86”
PaRt #ssH-2007
PaRt # DEsCRIPtIon
6552-EtH-10 Euro HingeFalse Front Hinge
PaRt # FoRCElFtUP-100sV 100n (22.5 lbs)lFtUP-150sV 150n (33.7 lbs)
OPI ECONOMY SERIES:SOFT STAYUP HINGE
CHROME PLATEDEURO HINGES
OPI ECONOMY SERIES: “LIFT - UP” GAS SPRING
F-309
PRODUCT FEATURES:• Positive stop to keep flap open• Left or right hand installation• 304 stainless steel/satin finish• 33 lbs. load each• Screws not included• Must install parallel to sidewall
gREAT FOR OFFICES
PRODUCT FEATURES:• 11 lb. capacity• Doors will not slam shut• Adjustable closing speed• Successfully passed 30,000 open/close cycles• Material: Steel, Zinc Diecast and Plastic• Screws included
For over the top Flipper doors
KEEPS FlAP/lIDS FROm SlAmmIng ShUT & FlyIng OPEnPRODUCT FEATURES:• Upward opening flap• Closing speed adjusts with the turn of a screw• Oblong holes of the mounting plate allow flap opening angle adjustable from 80° to 100°• Right and left hand mounting• For Piano/Butt/Concealed Hinges• Supplied with screws• Material: Zinc Alloy, Steel• Finish: Bright Nickel
torque Calculation: torque = door height x 1/2 x door WeightPer Piece: 20 - 70 kg • cm (19 - 60 lbs • inch)Per Pair: 40 - 140 kg • cm (38 - 120 lbs • inch)
Max 75° opening Max 90° opening
Conversion Formula: mm ÷ 25.40 = inchExample: 32mm ÷ 25.40 = 1.25 inches
Conversion Formula: mm ÷ 25.40 = inchExample: 32mm ÷ 25.40 = 1.25 inches
pArt #slide
leNGthtrAvel leNGth
ovl-14 355.6 mm 249.2 mmovl-15 381 mm 274.6 mm
pArt # tYpeNsdX-35l Left HandNsdX-35r Right Hand
pArt #ls-195
pArt #ls-270
ADJUSTABLE SOFT DOWN STAY
LID STAY
SOFT CLOSING MECHANISMS
F-310
Dimensions in millimeters
20 (B
oard
thi
ckne
ss)
requires Hinge
PRODUCT FEATURES:• Unique mechanism will help
lift doors and hold at the open position.
• Sleek & Compact design.• Easy installation• Adjustable mounting plate• Patented LAPCON technology
provides smooth and quite motion.
• Successfully passed 30,000 open/close private cycle tests.
PRODUCT FEATURES:• SOFT CLOSE• Constructed of nickel plated steel with light gray plastic
housing.• No tracks or guides required.• Handle positions at the bottom of the door.• Patented LAPCON technology provides smooth and
quiet motion.• Can be set for a 90˚ or 105˚ opening.• Smaller mechanism does not intrude into cabinet space.• Sold in pairs with all hardware included for one door.• Requires piano hinge or concealed hinge.• Can be used with aluminum or wood doors.
135 2632.5
95
38
18
425
(Doo
r tra
vel l
engt
h)35
2.5
35
Doo
r
3
34 3174
.3
32
Top board
Dimensions in millimeters
PART #DOOR WIDTH
DOOR HEIGHT DOOR WEIGHT (kg)
SLUN-3 600-900mm(23-5/8” to35-7/16”)
390-450mm(15-23/64 to17-23/32”)
2.5 - 3.5 (5.5 - 7.7 lbs.)SLUN-4 3.6 - 4.5 (7.9 - 9.9 lbs.)SLUN-5 4.6 - 5.2 (10.1 - 11.4 lbs.)
PART # DOOR WIDTH DOOR HEIGHT DOOR WEIGHT HBFN-2M
17-23/32” to 35-7/16” 12-19/32” - 14-9/16”5.5 - 7.7 lbs
HBFN-3M 7.9 - 9.9 lbsHBFN-4M 9.9 - 12.1 lbs
VERTICAL SWING UP MECHANISM
HORIZONTAL BIFOLDING DOOR MECHANISM
F-311
Black
White
62(2.441”)
38(1.496”)
22(.866”)
(1.13”)28.28
20(.797”)
20(.797”)
101(3.937”) 62
(2.441”)31.5
(1.240”)
10.5(.413”)
9 (.354”)
(.768”)19.5
65(2.559”)
(1.260”)32 4
(.157”)
(.472”)12
Mounting Plate SDS-A
S=Overlay Coverage in case of drop hingeHINGE TYPE A B C D
Single Knuckle Hinge 60 (2.362”) 73(2.874”) - -Drop Hinge - - 49+S (1.929”) 62+S(2.441”)
Product Features• For DOWNWARD-OPENING FLAP DOOR with piano, butt or drop hinges, (SOLD SEPARATELY) • Designed for small height door application• SDS-C100TV has a catch to hold the lid closed in position• SDS-100TV does not have a catch feature• Designed to be used with magnetic catch or touch latch• Torque Calculation: Torque = Door Height x 1/2 door Weight
PART # COLOR TYPE * TORQUE PER PIECE * TORQUE PER PAIRSDS-100W-TV White W/O Catch 5-12kgf•cm (4.3-10.4 lbs•in) 10-24kgf•cm (8.7-20.1 lbs•in)SDS-100B-TV Black
SDS-C100W-TV White With Catch 5-12kgf•cm (4.3-10.4 lbs•in) 10-24kgf•cm (8.7-20.1 lbs•in)SDS-C100B-TV BlackSDS-100W-TVZ White W/O Catch 16.5-37.6kgf•cm (14.3-32.6 lbs•in) 33-75.2kgf•cm (28.6-65.2 lbs•in)SDS-100B-TVZ Black
SDS-C100W-TVZ White With Catch 16.5-37.6kgf•cm (14.3-32.6 lbs•in) 33-75.2kgf•cm( 28.6-65.2 lbs•in)SDS-C100B-TVZ Black* Torque measurement is referring to kilograms of force per centimeter (kgf•cm) or pounds of force per inch (lbs•in).
(SHORT ARM)
SDS-100-TV/TVZ
SOFT DOWN STAY
F-312
SLS-ELAN
(1.102”)26
8 (.315”)
19mm (.748”) overlay use shown(Left-hand side mounting)
(7.283”)185
47(1.850”)
270
(10.
630”
)
(1.260”)32
(6.614”)168
(6.300”)160
25 (.984”) 27 (1
.063
”)59
(2.3
23”)
70 (2
.756
”)
DOOR WEIGHT RANGE TABLE (LBS.)DOOR
HEIGHT(inches)
SINGLE USE PAIR USEM-TYPE H-TYPE M-TYPE H-TYPE
MIN. MAX. MIN. MAX. MIN. MAX. MIN. MAX.12” 8.0 10.8 10.8 14.5 16.0 21.7 21.7 29.013” 7.4 10.0 10.0 13.4 14.8 20.0 20.0 26.814” 6.9 9.3 9.3 12.4 13.7 18.6 18.6 24.915” 6.4 8.7 8.7 11.6 12.8 17.3 17.3 23.216” 6.0 8.1 8.1 10.9 12.0 16.3 16.3 21.817” 5.6 7.6 7.6 10.2 11.3 15.3 15.3 20.518” 5.3 7.2 7.2 9.7 10.7 14.4 14.4 19.319” 5.1 6.8 6.8 9.2 10.1 13.7 13.7 18.320” 4.8 6.5 6.5 8.7 9.6 13.0 13.0 17.421” 4.6 6.2 6.2 8.3 9.1 12.4 12.4 16.622” 4.4 5.9 5.9 7.9 8.7 11.8 11.8 15.823” 4.2 5.7 5.7 7.6 8.3 11.3 11.3 15.124” 4.0 5.4 5.4 7.3 8.0 10.8 10.8 14.525” 3.8 5.2 5.2 7.0 7.7 10.4 10.4 13.926” 3.7 5.0 5.0 6.7 7.4 10.0 10.0 13.427” 3.6 4.8 4.8 6.4 7.1 9.6 9.6 12.928” 3.4 4.6 4.6 6.2 6.9 9.3 9.3 12.4
Single or Pair use depending on door size
• LAPCON stay for upward-opening flap doors.• Lift-assist mechanism for extra light-opening.• Damper equipped for soft & silent closing at the end.• Slim design and installed location maximizes space inside of cabinet.• Simple installation by aligning body to edge of cabinet.• Single or Pair use allows wide range of door size/weight.• Recognized by LGA for 40,000 cycles.• Optional bracket for aluminum frame door available, please inquire.
Product Features
PART # TYPETORQUE
PER PIECE MATERIALFINISH/COLOR
SLS-ELAN-MR (Right) M-Type (Medium Duty)
55-75 kg-cm(48-65 lbs•in) • Aluminum
• Steel • ABS
• Anodized• Galvanized• Light Gray
SLS-ELAN-ML (Left)SLS-ELAN-HR (Right) H-Type
(Heavy Duty)75-100 kg-cm(65-87 lbs•in)SLS-ELAN-HL (Left)
SOFT CLOSING LID STAY
F-313
• Lateral swing mechanism.• Ideal for tight front space application.• Allows doors to swing out laterally in a small radius.• Doors will not get in the way when fully opened thus providing full access to the cabinet.• Door has free swing & soft close.• Easy installation. Designed for standard 32mm system mounting, with snap-on hinge.• 4-way adjustment.• Can be used in single or double door configuration.• Ideal for cabinets and hiding flat screen t.v.’s.• Use with frameless cabinets.
Product Features
PARTS INCLUDED:
• Hinge Body: 2 pcs. •Connecting Bar: 1 pcs.• Mounting Plates: 2 pcs. •Cover Cap: 2 pcs.
LIN-X-SET
EACH BASIC KIT DOES 1 DOOR
Hinge Body(Closed)
Hinge Body(Open)
CLOSE-UP:
LIN-X450 LIN-X600Door (Max. 7kg)
(15.4 lbs.)
264(10-25/64”)
Door
Hei
ght 6
00-9
00(2
3-5/
8”-3
5-7/
16”)
Door Width 400-500(15.748-19.685”)
70(2
.756
”)
236
(9.2
91”)
Door
Thi
ckne
ss15
-24
(.591
-.945
”)
68(2
.677
”)
Max
. 490
(19.
291”
)54
6(2
1-1/
2”)
Door (Max. 9kg)(19.8 lbs.)
264(10-25/64”)
Door
Hei
ght 6
00-9
00(2
3-5/
8”-3
5-7/
16”)
Door Width 550-650(21.656-25.594”)
70(2
.756
”)
236
(9.2
91”)
Door
Thi
ckne
ss15
-24
(.591
-.945
”)
68(2
.677
”)
Max
. 490
(19.
291”
)54
6(2
1-1/
2”)
ANODIZED NICKEL FINISH ~ STEEL / ALUMINUM MATERIAL
NOTE: When working with taller/heavier doors,
please inquire!!! Many options available!
CLOSED
OPENED
Optional bracket to use LIN-X450 & LIN-X600 with face frame cabinets.
FACE FRAMECABINET OPTIONS
Bracket- Sold Separately
FFCB-HG-1
PART #DOOR WIDTH
DOOR HEIGHT
DOOR THICKNESS
DOOR WEIGHT
LIN-X450 400-500mm15-3/4” - 19-11/16”
600-900mm23-5/8” - 35-7/16”
15-24mm19/32” - 61/64”
max 7kg15.4 lbs./door
LIN-X600 550-650mm21-21/32” - 25-19/32”
600-900mm23-5/8” - 35-7/16”
15-24mm19/32” - 61/64”
max 9kg19.8 lbs./door
LATERAL OPENING DOOR HINGE
F-314
• Strong magnet holds door in the open position. • 17.6 lbs. of magnetic force per assembly. • Can be mounted on either the floor or the wall. • Optional anchor bolt available for installing on concrete surfaces. • Available in ivory or brown.
Product Features
• 304 Stainless steel body with aluminum cylinder and steel pin/shaft. • Bracket arm catches the roller for self closing at approximately 10º. • Silent operation, the hydraulic cylinder absorbs shock, preventing the door from slamming shut. • Easy installation, ideal for retro-fit. • Works with a maximum door width of 43-5/16”. • Maximum door weight of 176 lbs.
Product Features
PART #SMDH/IVY
SMDH/BRNANCHOR-SMDH*
*Optional
JFR-021205
DOOR STOPPER
STAINLESS STEEL HYDRAULIC DOOR CLOSER
F-315
Product Features
• No more lids that slam shut! This hinge has a built-in soft close dampening mechanism.• Mortise mounting.• Sold in pairs, handed.• Choice of Black or White cover.• Ideal for small to large lids.• Calculate torque required to determine which hinge will work best for your application.• Torque Calculation: Torque = Door Height x 1/2 x Door Weight.• For upward opening applications only.
No. PART NAME MATERIAL FINISH / COLOR1 Bracket Polyacetal Black2 Mounting Plate Aluminum Black3 Face Plate ABS Black / White4 Damper 304 Stainless Steel Plain
.118”.157”
1 4
3 2
2.126”
1.97
”
HG-JHM162.60”
2.12
6”
HG-JHM20
DampingDirection
Black Cover White Cover
Bracket / Mounting Plate
HG-JHM16 HG-JHM20
PART # COLOR DESCRIPTION*TORQUE PER PAIR
HG-JHM16-34 Black Body 17.4 - 29.5 lbs•inHG-JHM16-50 29.5 - 43.4 lbs•inHG-JHM16-BL Black Face Plate -HG-JHM16-WT WhiteHG-JHM20-80 Black Body 53 - 70.8 lbs•inHG-JHM20-BL Black Cover -HG-JHM20-WH White* Torque measurement is referring to pounds of force per inch (lbs•in)
HG-JHM16/20SOFT CLOSING DAMPENING HINGE
F-316
K101-4079-
UPPER TRACK For:K101-606, K101-610,K101-601
STYRENEK101-606-
LOWER DOUBLE FLAT TRACKFor 5/8” Doors
K101-610-
LOWER DOUBLE FLAT TRACKFor 3/4” Doors K101-601-
LOWER SINGLEFLAT TRACK
BROWN, WHITE,BLACK, ALMOND
Nylon Glides Are Recessed Into The DoorR26-62BE 1/4” x 1/4” x 1” For Use with:
K101-606K101-610K101-601
180- For 1/8” Doors 140- For 1/4” Doors 120- For 1/2” Doors 340- For 3/4” Doors
*5/32”gap
*5/16”gap
*9/16”gap
*13/16”gap
StyreneWhite - Black - Brown
12 Ft. Lengths
StyreneWhite - Black - BrownAlso Available in Beige
12 Ft. Lengths
StyreneWhite - Black - BrownAlso Available in Beige
12 Ft. Lengths
StyreneWhite - Black - BrownAlso Available in Beige
12 Ft. Lengths
R101-603-BRFor 3/16”-1/4” glass/panelAnti-Rattle Feather Track
Polypropylene- Brown12 Ft. Lengths
NOTE: ALL TRACK CAN BE MADE AVAILABLE WITH PRESSURE SENSITIVE TAPE. PLEASE INQUIRE.
Mounts onto 1/4” mortise on the bottom of each door with a brad nail.
K101-4079
R26-62
K101-610
100/500’ coils
NYLON NON-LOCKING GLIDES
- OUR MOST POPULAR ASSEMBLY-Complete Set Consists Of:
1 x 12 Ft. Length Upper Track1 x 12 Ft. Length Shoe
1 x 12 Ft. Length Lower Track1 Wheel Per Running Ft.
• Lower track has sidewalls to prevent rollers from slipping off track• 1” (25.4mm) shoe allows superior gripping of glass or plywood doors.• Deep upper track to allow extra clearance and easy installation.• Zinc plated rollers with plastic wheel.• Track & shoe material is rigid PVC.
SLIDING DOOR TRACK SYSTEM WITH WHEELS12 FT. LENGTHS - AVAILABLE IN SILVER GRAY
MT39-SG For 1/4” Doors
No Glides or Wheels Needed – For Light Weight Doors
SLIDING DOOR TRACK SYSTEM WITH WHEELS12 FT. LENGTHS - AVAILABLE IN SILVER GRAY & BLACK
HIGH QUALITY EASY-ROLL METAL BALL BEARINGS WITH ECONOMY OF PLASTIC TRACK.CASE PRICES
Complete - 2 Tracks,1 Dual Wheel Per Running Ft.
MT38- For 1/4” Doors
NOTE: Rough Opening
Less 7/8” = Door Size
POLYPROPYLENE - WHITE & BROWN
- 12 FOOT LENGTHS
For additional wheels, order
Part #MTR2
For additional wheels, order
Part #MTR
PLASTIC SLIDING DOOR TRACK
PLASTIC MIRACLE TRACK
PLASTIC MIRACLE TRACK II
F-317
FINISH CHARTM Mill As extruded - may or may not have “scratches”/die lines. Dull Finish.
ALUT18-M For 1/8” Doors
ALUT14-M For 1/4” Doors
ALUT12-M For 1/2” Doors
ALUT34-M For 3/4” Doors
ALU7474-M
ALUT134SP-M For 3/4” Doors
ALUSH2-12 For Up to 1/4”Doors
Galvinized Steel
ALURC4-12Galvinized Steel
Wheels every 4-1/2”.Use 2/3 of the track with wheels.Example:6 ft. opening use 4 ft. of roller system.
12 FOOT LENGTHS
SELF SUPPORTING PILE IS ALWAYS ON CENTER AND HAS THE INTEGRITY AND CONSISTENCY
TO ENSURE A TIGHT SEAL.
MANY APPLICATIONS:Windows
DoorsShowcases
50'Minimum Coil
No Glides or Wheels Needed
PART# DESCRIPTION COLORDS-150-GY .270 W x .150 H GrayDS-200-GY .270 W x .200 H Gray
ALUMINUM SLIDING DOOR TRACK
ULTRA PILE DUST SEAL/WEATHER SEAL w/ADHESIVE
F-318
Product Features:•Ballbearinghighqualityrollersforasilent&smoothglide.•Stoppersareinstalledinsidethetrack.•Onetrackworkswithbothglass&woodcarrierkits.•Aluminumtrackavailableintwolengths.•Worksasbothupper&lowertrack.•Glasscarrierworkswith5/32-1/4”thickdoorsupto33lbs. Note: Must bore holes in glass for installation before tempering•Woodcarrierworkswith5/8”thickdoorsupto33lbs.
carrIer INstaLLatIoN GuIde INstaLLatIoN
AL1535GLASS&WOOD:Idealforbypassglassorwooddoorsinfurnitureapplications.
SLIDINGDOORSYSTEMFORFURNITURE
carrIer INstaLLatIoN GuIde INstaLLatIoN
For Glass
For Wood
ALUMINUMTRACK(ClearAnodizedFinish)AL1535-TRK66.5 Ft. Lengths
AL1535-TRK1010 Ft. Nominal Lengths
GLASSDOORCARRIERKITFOR2DOORSEach Kit Includes: 4 carriers, 4 top guides w/clip device, 8 finishing caps, 4 stoppers w/retention device & screws.
AL1535-GKIT
WOODDOORCARRIERKITFOR2DOORSEach Kit Includes: 4 carriers, 4 top guides w/clip device,, 4 stoppers w/retention device & screws.
AL1535-WKIT
SLIDING DOOR FITTINGS
F-319
D25:Idealforbypasswooddoorsinfurnitureapplications.
SLIDINGDOORSYSTEMFORFURNITURE
Product Features:•Easytoinstall®ulate.
•PVCtrackavailablein6colorstomatchanyapplication.
•Worksasbothupper&lowertrack.
•Workswith5/8”thickdoorsupto33lbs.
carrIer INstaLLatIoN GuIde INstaLLatIoN tracK INstaLLatIoN
Silver(SL),Brown(BR),Caramel(CA),Beige(BE),White(WH)&Black(BK)
PVCTRACK(finishesbelow)D25-TRK10-10 Ft. Nominal Lengths
WOODKIT
A
choice of Matching colors:
Each Kit Includes: 4 carriers, 4 stoppers, 4 upper guides & screws.
D25-KIT
SLIDING DOOR FITTINGS
F-320
Product Features:•Ballbearinghighqualityrollersforasilentandsmoothglide.
•Stopperswithretentiondeviceinstalledinsidethetrackwillstopandretainthedoorinposition.
TOPSLIDINGDOORTRACKFORWOODDOORS
IdealforIn-lineorbypassdoors,whentworunsof
trackareused.
For 3/4” or tHIcKer Wood doors uP to 100 LB. Load caPacItY
CARRIER TRACK
> 2-1/2”
1-23/32”
1/2"
3/4"
3/16"
5/8"
3/8"
TRACK INSTALLATION
GUIDE INSTALLATION
CARRIER INSTALLATION
D & E
1 set required per doorDN50-WKIT
2 Rollers
2 Stoppers with retention device
1 Floor guide GP-12
2 Mounting plates
Screws
A
B
C
D
E
MAX DOORWEIGHT
110 50 KG
LBS
DOORTHICKNESS
> 18 mm> 3/4”
E
INLAY SYSTEM BYPASS IN LINE/
1
MAX DOORHEIGHT
NONENONE
MAX DOORWIDTH
DOOR / TRACKGAP
>13 mm> 1/2”
>3 mm>1/8”
N.A.
MIN DOORFRAME HEIGHT
WOOD
DOOR FRAMEMATERIAL
ANSI-BHMA *
GRADE 1
SYSTEM 32
NO
ROLLER
BEARINGPREMIUM
BALL
DN50
ALUMINUMTRACK(ClearAnodizedFinish)DN50-TRK66.5 ft. Lengths
DN50-TRK1010 ft. Nominal Lengths
WOODDOORCARRIERKIT
DN50-WKIT
SLIDING DOOR FITTINGSNEW!
F-321
TRACK INSTALLATION
GUIDE INSTALLATION
CARRIER INSTALLATION
> 3-3/16”
1-3/8”
1-9/16”
3/8”
5/8”
D & E
TOPSLIDINGDOORTRACKFORWOODDOORSDN80
IdealforIn-lineorbypassdoors,whentworunsof
trackareused.
For 13/16” or tHIcKer Wood doors uP to 176 LB. Load caPacItY
1 set required per doorDN50-WKIT
2 Rollers
2 Stoppers with retention device
1 Floor guide GP-12
2 Mounting plates
Screws
A
B
C
D
E
MAX DOORWEIGHT
110 50 KG
LBS
DOORTHICKNESS
> 18 mm> 3/4”
E
INLAY SYSTEM BYPASS IN LINE/
1
MAX DOORHEIGHT
NONENONE
MAX DOORWIDTH
DOOR / TRACKGAP
>13 mm> 1/2”
>3 mm>1/8”
N.A.
MIN DOORFRAME HEIGHT
WOOD
DOOR FRAMEMATERIAL
ANSI-BHMA *
GRADE 1
SYSTEM 32
NO
ROLLER
BEARINGPREMIUM
BALL
1 set required per doorDN80-WKIT
2 Rollers
2 Stoppers with retention device
1 Floor guide GP-12
2 Mounting plates
Screws
A
B
C
D
E
MAX DOORWEIGHT
176 80 KG
LBS
DOORTHICKNESS
> 20 mm> 13/16”
E
INLAY SYSTEM BYPASS IN LINE/
1
MAX DOORHEIGHT
NONENONE
MAX DOORWIDTH
DOOR / TRACKGAP
>16.5 mm> 21/32”
>5 mm>13/64”
N.A.
MIN DOORFRAME HEIGHT
WOOD
DOOR FRAMEMATERIAL
ANSI-BHMA *
GRADE 1
SYSTEM 32
NO
ROLLER
BEARINGPREMIUM
BALL
CARRIER TRACK
Product Features:•Ballbearinghighqualityrollersforasilentandsmoothglide.
•Stopperswithretentiondeviceinstalledinsidethetrackwillstopandretainthedoorinposition.
ALUMINUMTRACK(ClearAnodizedFinish)DN80-TRK66.5 ft. Lengths
WOODDOORCARRIERKIT
DN80-WKIT
SLIDING DOOR FITTINGSNEW!
F-322
FINISH CHARTM Mill As extruded - may or may not have
“scratches”/die lines. Dull Finish. A medium duty commercial and residential grade sliding door hard-ware series ideal for single and bi-parting installations. Applications include doors between rooms, closet doors, cabinets, storage walls, and partitions.• Grant Sliding door hardware.• For doors 3/4” and up weighing up to 150 lbs (68 kg).• Precision ball-bearing wheels guarantee a smooth, quiet and
long lasting performance.• Heavy duty aluminum l-beam track; jump proof design.• Pivoting rocker arms ensure track-carrier contact.• Bail and socket suspension compensates for minor header
misalignment.• Lock nut guarantees permanent positioning.• Vertical adjustment + 3/8” (9.5 mm).• Conforms to ANSI/BHMA standards, Grade 1.• Made in USA.
12 FooT LeNgTHS 150 LbS.
A heavy duty commercial and residential grade sliding door hardware series ideal for design applications which require the movement of heavy panels, space dividers or large doors.• Grant sliding door hardware.• For doors 1” and up weighing up to 325 lbs/door (147 kg/door).• Precision ball-bearing wheels guarantee a smooth, quiet and
effortless operation.• Four wheel carrier, center hung for efficient operation.• Vertical adjustment + 1/4” (6.4 mm).• Heavy duty aluminum l-beam track; jump proof design.• Conforms to ANSI/BHMA standards, Grade 1.• Made in USA.For by-passing doors mount parallel tracksFor bi-parting doors use an additional set of hardware
12 FooT LeNgTHS 325 LbS.
Holes spaced every 6”
staggered
Holes spaced every 6”
staggered
6”
6”
PART #ALU561-M
PART #561-R
PART #ALU562-M
PART #562-R
ALUMINUM SINGLE UPPER TRACK WITH HOLES
F-323
FoR 3/4” oR 1-3/8” THICK DooRS (Weighing up to 50 lbs. each)
CoNTeNTS:1 length of steel track
2 pairs of nylon wheel hangers with installation screws1 nylon adjustable floor guide
2 brass finger pulls
PLASTIC FINgeR PULLS with high quality pressure sensitive adhesive backing. No holes to drill. Peel off protective backing paper and apply directly to surface of glass.
170-WH (WHITE)170-bK (BLACK)170-CL (CLEAR)
• Simple adjustment with a screw driver• Nylon adjustable non-routing floor guides• Nylon wheel hangers for smooth,
quiet operation• Shrink packed with all necessary hardware• Installation instructions included
gLASS FINgeR PULLS• 3/4” x 2-3/4” thick with peel
and stick adhesive backing.
PART # FINISH171-Cg Clear Glass171-Mg Mirror Glass
PART #TRACK
LeNgTHDooR SIZe
SDT-400 4 ft. 24”SDT-500 5 ft. 30”SDT-600 6 ft. 36”SDT-800 8 ft. 48”
BY-PASS CLOSET DOOR TRACK SET