- 1. Features and TypesSlide RailFeatures of the Slide RailOuter
railInner rail Cage BallFig.1 Structure of Slide Rail Model
FBLStructure and Features Slide Rail model FBL is a thin, compact,
lightweight and ultra-low price slide unit for nite motion. It has
two rows of balls placed between an inner rail (made of a steel
sheet roll-formed with precision) and an outer rail. The balls are
evenly spaced by a cage press-molded with precision, thus
eliminating friction between balls and achieving a smooth slide
mechanism. Since model FBL achieves smooth straight motion with
easy installation, it can be used in a wide range of applications
such as photocopiers, measuring instruments, telecommunication
equipment, medical equipment, automatic vending machines and
various types of of ce equipment. [Unit Type That Allows Easy
Installation] Since the clearance and the motion of the slide unit
are optimally adjusted, simply mounting the unit onto the base or
the table using screws will achieve a slide mechanism with
virtually no running noise. [Thin and Compact] Since the sectional
shape is thin designed, this slide pack only requires a small side
space for installation. In addition, a desired number of slide pack
units can be installed in parallel according to the load
conditions. [Maintenance-free Operation] Since the Slide Rail model
FBL is treated with zinc plating, and models E and D are treated
with white alumite treatment, they are highly corrosion resistant.
In addition, the slide unit contains lithium soap-based grease,
which is highly stable against oxidation.A13-2
2. Features and Types Types of the Slide RailTypes of the Slide
Rail Types and Features [Single Slides for Light Load]Model FBL
27SSpeci cation TableA13-14The most compact slide rail from
THK.Model FBL 27SModel FBL 27S-P14Speci cation TableA13-15An inner
rail pulling type of model FBL 27S. Releasing the automatic free
disconnection spring attached on the inner rail allows the slide
rail to be pulled out. When stored, the spring is automatically
released unidirectionally under a certain pressure.Slide RailModel
FBL 27S-P14Model FBL 35SSpeci cation TableA13-16A single slide type
of Slide Rail with the most fundamental shape.Model FBL 35SA13-3 3.
Model FBL 35S-P13Speci cation TableA13-17An inner rail pulling type
of model FBL 35S. Releasing the disconnection spring attached on
the inner rail allows the slide rail to be pulled out. When folded,
the locked state with the disconnect spring is manually
released.Model FBL 35S-P13Model FBL 35S-P14Speci cation
TableA13-18An inner rail pulling type of model FBL 35S. Releasing
the automatic free disconnection spring attached on the inner rail
allows the slide rail to be pulled out. When stored, the spring is
automatically released unidirectionally under a certain
pressure.Model FBL 35S-P14A13-4 4. Features and Types Types of the
Slide RailModel FBL 35MSpeci cation TableA13-19An inner rail
pulling type of model FBL 35S. It stops by frictional resistance
when the slide rail is fully opened, and is pulled out when being
pulled further with force. (brake-stop type)Model FBL 35MModel FBL
35JSpeci cation TableA13-20Based on model FBL 35M, this model has a
lead ball that serves as a guide when the inner rail is
inserted.Model FBL 35JSpeci cation TableA13-21A brake-stop type of
model FBL 35M. It can be mounted on the bottom face of a moving
object when used.Model FBL 35BA13-5Slide RailModel FBL 35B 5.
[Single Slides for Medium Load]Model FBL 35TSpeci cation
TableA13-22A single slide combining two units of model FBL 35S.
When folded, the locked state with the disconnect spring is
manually released.Model FBL 35T[Double Slides for Light Load]Model
FBL 27DSpeci cation TableA13-23A double-slide type that combines
two units of model FBL 27S back-to-back. It is widely used in
various types of OA equipment.Model FBL 27DModel FBL 35ESpeci
cation TableA13-24This is a 2-level slide-unit type suitable for
restricted spaces, featuring a stroke length that can exceed the
total rail length.Model FBL 35EModel FBL 35E-P14Speci cation
TableA13-25A three-rail, double-slide type that allows a long
stroke in a small space. Releasing the automatic free disconnection
spring attached on the inner rail allows the inner rail to be
pulled out. When closed, the locked state is automatically released
under pressure in the closing direction.Model FBL 35E-P14A13-6 6.
Features and Types Types of the Slide Rail[Double Slides for Medium
Load]Model FBL 35G-P13Speci cation TableA13-26A double-slide type
that combines two units of model FBL 35S front-to-front. Releasing
the automatic free disconnection spring attached on the inner rail
allows the inner rail to be pulled out. When folded, the locked
state with the disconnect spring is manually released. It is also
equipped with a pull-lock mechanism that functions when the slide
rail is fully opened. Model FBL 35G-P13Model FBL 35G-P14 A
double-slide type that combines two units of model FBL 35S
front-to-front. Releasing the automatic free disconnection spring
attached on the inner rail allows the inner rail to be pulled out.
When folded, the lock state with the disconnect spring can
automatically be released under a certain pressure in the folding
direction. It is also equipped with a pull-lock mechanism that
functions when the slide rail is fully opened.Model FBL 35DSpeci
cation TableA13-27Model FBL 35G-P14Speci cation TableA13-28Slide
RailA double-slide type that combines two units of model FBL 35S
back-to-back. It is extensively used regardless of the
industry.Model FBL 35DModel FBL 35WSpeci cation TableA13-29A
double-slide type based on model FBL 35S that achieves a thickness
of one single-slide unit.Model FBL 35WA13-7 7. Model FBL 51HSpeci
cation TableA13-30A three-rail, double-slide type that allows a
long stroke. With the smallest thickness, this model can be used in
a space-saving location even under a large load.Model FBL 51HModel
FBL 51H-P13Speci cation TableA13-31A three-rail, double-slide type
that allows a long stroke. With the smallest thickness, this model
can be used in a space-saving location even under a large load.
Releasing the automatic free disconnection spring attached on the
inner rail allows the inner rail to be pulled out. When folded, the
locked state with the disconnect spring is manually released. It is
also equipped with a lock mechanism that functions when the slide
rail is fully opened. Model FBL 51H-P13Model FBL 51H-P14Speci
cation TableA13-32A three-rail, double-slide type that allows a
long stroke. With the smallest thickness, this model can be used in
a space-saving location even under a large load. Releasing the
automatic free disconnection spring attached on the inner rail
allows the inner rail to be pulled out. When closed, the locked
state is automatically released under pressure in the closing
direction.Model FBL 51H-P14A13-8 8. Features and Types Types of the
Slide Rail[Double Slides for Heavy Load]Model FBL 35KSpeci cation
TableA13-33A double-slide type combining 4 units of model FBL 35S.
It achieves the largest permissible load among all types and is
optimal for opening/ closing heavy objects.Model FBL 35KModel FBL
56HSpeci cation TableA13-34A double-slide type with the largest
permissible load among the three rails. It is used extensively in
various types of OA furniture.Model FBL 56HModel FBL 56H-P13Speci
cation TableA13-35Slide RailA double-slide type with the largest
permissible load among the three rails. Releasing the automatic
free disconnection spring attached on the inner rail allows the
inner rail to be pulled out. When folded, the locked state with the
disconnect spring is manually released. It is also equipped with a
lock mechanism that functions when the slide rail is fully opened.
Model FBL 56H-P13Model FBL 56H-P14Speci cation TableA13-36A
double-slide type with the largest permissible load among the three
rails. Releasing the automatic free disconnection spring attached
on the inner rail allows the inner rail to be pulled out. When
closed, the locked state is automatically released under pressure
in the closing direction.Model FBL 56H-P14A13-9 9. [Linear Type
Slides]Light Load Type Model FBL 35FSpeci cation TableA13-37Using a
ange type that can easily be mounted, this slide-type model is
capable of performing straight, nite motion.Light Load Type Model
FBL 35FMedium Load Type Model FBL 56FSpeci cation TableA13-38Using
a ange type that can easily be mounted, this slide-type model is
capable of performing straight, nite motion. It is optimal for
locations under a large working load.Medium Load Type Model FBL
56FHeavy Load Type Model FBL 48DRSpeci cation TableA13-39A
heavy-load, low-friction slide rail developed for sliding heavy
doors.Heavy Load Type Model FBL 48DR[Wheel-type Linear Slide]Model
E36RSSpeci cation TableA13-40A linear slide that combines a
lightweight outer rail made of precision-extruded aluminum alloy
with a highly wear-resistant resin bearing. Since no grease adheres
to the rail surface, it can be used for a drawer without soiling
the stored articles. Model E36RSA13-10 10. Features and Types Types
of the Slide Rail[Aluminum Alloy Slide Rail]Light Load Type Model
E15Speci cation TableA13-41The lightest and most compact single
slide in the aluminum alloy series. It is especially suitable for
locations with magnetism, locations requiring antirust measures and
locations where much importance is given to appearance.Light Load
Type Model E15Light Load Type Model E20Speci cation TableA13-42A
single-slide with the most fundamental shape in the aluminum alloy
series. It is especially suitable for locations with magnetism,
locations requiring antirust measures and locations where much
importance is given to appearance.Light Load Type Model D20Speci
cation TableA13-43The lightest and most compact double slides in
the aluminum alloy series. It is especially suitable for locations
with magnetism, locations requiring antirust measures and locations
where much importance is given to appearance.Light Load Type Model
D20A13-11Slide RailLight Load Type Model E20 11. Classi cation
Table for Slide RailsSlide Rail Single SlideDouble SlideFor Light
Load Model FBL27SModel FBL35BFor Light Load Model FBL27DModel
FBL27S-P14Model FBL35E35.3272748.5Model FBL35E-P1433 19.1 9.5Model
FBL35J Model FBL35S13Model D20 (Made of Aluminum) 2035.3Model
FBL35S-P13 Model FBL35S-P149.5 16Model E15For Heavy Load9.55Model
FBL35MModel E20Model FBL56H 561535.3(Made of Aluminum)Model
FBL56H-P13(Made of Aluminum)Model FBL56H-P14 2035.316Model
FBL35K9.571.48For Medium Load71.4Model FBL35T12.7A13-1223.9 12.
Features and Types Classi cation Table for Slide RailsLinear Type
Slide For Medium Load Model FBL51HModel FBL35G-P14Model
FBL51H-P1335.3Model FBL51H-P14Model FBL35F35.3Model FBL35G-P13For
Light Load11.151.519.1Model FBL35D12.7Model FBL56F5681.335.3Model
FBL35WFor Medium Load19.114For Heavy Load48Model FBL48DR14.6Wheel
Type36Model E36RS (Aluminum Outer Rail)12A13-13Slide Rail12.7 13.
Model FBL 27S Stroke length S3Rail length L0.8 200.5B 0.3 A0.32-
4.5 (both ends)1000.3 200.3Access hole200.3 1000.3 C0.34.26 Access
hole2- 4.5 (both ends)4.2 6D 0.3 E0.3 Rail length (L-3)
0.8200.59.50.5 Outer rail270.5Inner rail 1.61.6Retainer Cross
section Unit: mmRail length L ( 0.8)Stroke S (
3)ABCDE200135140.0160.0140.0160.0Mounting hole dimensionsMounting
holePermissible load N/pair Inner rail Outer rail 55260Mass kg/pair
0.32250185190.0210.0150.0190.0210.0652400.40300222240.0260.0190.0240.0260.0652400.48350260290.0310.0225.0290.0310.0652300.56400297340.0360.0265.0340.0360.0652100.64450334390.0410.0300.0390.0410.0652000.72500371440.0460.0337.0440.0460.0651800.80Note)
The Permissible Load and Mass each indicate when used as a pair of
2 units. Model number codingFBL27S +300L Model numberA13-14Overall
rail length (mm)To download a desired data, search for the
corresponding model number in the Technical
site.https://tech.thk.com 14. Model FBL 27S-P14Stroke length S3Rail
length L 0.8 E0.3200.5D0.3 2- 4.5 (both ends)1000.3 200.3Lead
stick4.264.262- 4.5 (both ends)Automatic free disconnection
spring200.3 A 0.3Rubber cushionB0.3 C0.3200.59.50.5 Outer railRail
length (L-3) 0.8270.5Inner rail 1.61.6Retainer Cross sectionRail
length L ( 0.8)Stroke S (
3)ABCDE20011665.0170.0140.0160.0452600.32250152100.0210.0190.0210.0452400.40300202100.0260.0240.0260.0452400.48350251100.0310.0290.0310.0452300.56400297100.0360.0340.0360.0452100.64450332100.0390.0410.0390.0410.0552100.72500371100.0440.0460.0440.0460.0552000.80550407100.0490.0510.0490.0510.0551800.80Mounting
hole dimensionsMounting holePermissible load N/pair Inner rail
Outer railMass kg/pairNote) The Permissible Load and Mass each
indicate when used as a pair of 2 units. Model number
codingFBL27S-P14 +500L Model numberOverall rail length
(mm)A13-15Slide RailUnit: mm 15. Model FBL 35SStroke length S3Rail
length L 0.8 G0.3 F0.3 E0.3 D0.3 111.10.3 4.55.315.90.5Access
hole4.5 5.3101.60.3 A0.3 B0.3 25.40.512.70.3 25.40.3C0.3 Rail
length (L-3) 0.89.50.5 Outer rail Inner rail
35.30.51.61.6RetainerCross sectionUnit: mmRail length Stroke L S (
0.8) ( 3)Mounting hole dimensions ABCDEMounting holeFGPermissible
load Mass N/pair kg/pair Inner rail Outer rail305229152.4
254.0149.2 260.3 273.0474900.6356279203.2 304.8200.0 311.1
323.8474000.7406305254.0 355.6250.8 361.9 374.6473900.8457330203.2
304.8 406.4 212.7 301.6 412.7 425.4583800.9508381228.6 355.6 457.2
238.1 352.4 463.5 476.2583301.0559406254.0 406.4 508.0 263.5 403.2
514.3 527.0583201.1610432279.4 457.2 558.8 288.9 454.0 565.1
577.8583101.2660483304.8 508.0 609.6 314.3 504.8 615.9
628.6582801.3711508330.2 558.8 660.4 339.7 555.6 666.7
679.4582701.4Note) The Permissible Load and Mass each indicate when
used as a pair of 2 units. Model number codingFBL35S +457L Model
numberA13-16Overall rail length (mm)To download a desired data,
search for the corresponding model number in the Technical
site.https://tech.thk.com 16. Model FBL 35S-P13 Rail length
L0.8Stroke length S3 28.60.5F 0.3 E0.3 D 0.3 C0.3 98.40.3Access
hole 4.55.312.70.3Lead stick101.60.34.55.3 Disconnection springA0.3
25.40.59.50.5 Outer railB0.3Inner railRail length (L-4) 0.8
35.30.51.61.6RetainerCross sectionRail length Stroke L S ( 0.8) (
3)Mounting hole dimensions ABCDMounting holeEFPermissible load
N/pair Inner rail Outer railMass
kg/pair305224152.4136.5247.6260.3364900.6356275203.2187.3298.4311.1364000.72406315254.0238.1349.2361.9363900.84457330203.2406.4200.0288.9400.0412.7473800.96508381228.6457.2225.4339.7450.8463.5473301.04559406254.0508.0250.8390.5501.6514.3473201.16610432279.4558.8276.2441.3552.4565.1473101.24660483304.8609.6301.6492.1603.2615.9472801.36711493330.2660.4327.0542.9654.0666.7472701.48Note)
The Permissible Load and Mass each indicate when used as a pair of
2 units. Model number codingFBL35S-P13 +559L Model numberOverall
rail length (mm)A13-17Slide RailUnit: mm 17. Model FBL 35S-P14 Rail
length L 0.8Stroke length S3 28.60.5F0.3 E0.3 D0.3 C0.3
98.40.3Access hole Lead stick4.55.3101.60.312.70.34.55.3Automatic
free disconnection springA0.3 25.40.59.50.5 Outer railB0.3 Rail
length (L-4) 0.8 35.30.5Inner rail 1.61.6RetainerCross section
Unit: mmRail length Stroke L S ( 0.8) ( 3)Mounting hole dimensions
ABCDMounting holeEFPermissible load N/pair Inner rail Outer
railMass
kg/pair305224152.4136.5247.6260.3364900.6356275203.2187.3298.4311.1364000.72406315254.0238.1349.2361.9363900.84457330203.2406.4200.0288.9400.0412.7473800.96508381228.6457.2225.4339.7450.8463.5473301.04559406254.0508.0250.8390.5501.6514.3473201.16610432279.4558.8276.2441.3552.4565.1473101.24660483304.8609.6301.6492.1603.2615.9472801.36711493330.2660.4327.0542.9654.0666.7472701.48Note)
The Permissible Load and Mass each indicate when used as a pair of
2 units. Model number codingFBL35S-P14 +559L Model
numberA13-18Overall rail length (mm)To download a desired data,
search for the corresponding model number in the Technical
site.https://tech.thk.com 18. Model FBL 35M Stroke length S3Rail
length L 0.8 G 0.3 F0.3 E0.3 D0.3 111.1 0.3 4.55.315.90.5Access
hole4.5 5.3101.60.3 A0.3 B0.3 25.40.512.70.3 25.40.3C 0.3 Rail
length (L-4) 0.8 9.50.5 Outer rail Inner rail
35.30.51.61.6RetainerCross section Rail length Stroke L S ( 0.8) (
3)Mounting hole dimensions ABCDEFGMounting hole Permissible load
Mass N/pair kg/pair Inner rail Outer rail305229152.4 254.0149.2
260.3 273.0474900.6356279203.2 304.8200.0 311.1
323.8474000.7406305254.0 355.6250.8 361.9 374.6473900.8457330203.2
304.8 406.4 212.7 301.6 412.7 425.4583800.9508381228.6 355.6 457.2
238.1 352.4 463.5 476.2583301.0559406254.0 406.4 508.0 263.5 403.2
514.3 527.0583201.1610432279.4 457.2 558.8 288.9 454.0 565.1
577.8583101.2660483304.8 508.0 609.6 314.3 504.8 615.9
628.6582801.3711508330.2 558.8 660.4 339.7 555.6 666.7
679.4582701.4Note) The Permissible Load and Mass each indicate when
used as a pair of 2 units. Model number codingFBL35M +406L Model
numberOverall rail length (mm)A13-19Slide RailUnit: mm 19. Model
FBL 35JStroke length S3Rail length L 0.8 G0.3 F0.315.90.5Access
hole 4.55.3E0.3 D0.3 111.1 0.3 25.40.3 12.70.3Lead
ball4.55.3101.60.3 A0.3 B0.39.50.5 Outer railC 0.3 Rail length
(L-4) 0.8Inner rail 35.30.525.40.51.61.6RetainerCross section Unit:
mmRail length Stroke L S ( 0.8) ( 3)Mounting hole dimensions
ABCDEMounting holeFGPermissible load Mass N/pair kg/pair Inner rail
Outer rail305229152.4 254.0149.2 260.3 273.0474900.6356279203.2
304.8200.0 311.1 323.8474000.7406305254.0 355.6250.8 361.9
374.6473900.8457330203.2 304.8 406.4 212.7 301.6 412.7
425.4583800.9508381228.6 355.6 457.2 238.1 352.4 463.5
476.2583301.0559406254.0 406.4 508.0 263.5 403.2 514.3
527.0583201.1610432279.4 457.2 558.8 288.9 454.0 565.1
577.8583101.2660483304.8 508.0 609.6 314.3 504.8 615.9
628.6582801.3711508330.2 558.8 660.4 339.7 555.6 666.7
679.4582701.4Note) The Permissible Load and Mass each indicate when
used as a pair of 2 units. Model number codingFBL35J +660L Model
number Overall rail length (mm)A13-20To download a desired data,
search for the corresponding model number in the Technical
site.https://tech.thk.com 20. Model FBL 35B Rail length L 0.8Stroke
length S34.610.363.5 41.4 4.7 6.54.65.33 4.29.5 3.76.44.8 101.60 to
35 213.9139.7 3 4.65.3 2 4.3P11.647.912.7Mounting bracket3 4.8Rail
length (L-4) 0.8Mounting bracket2 4.5 4.6 31.8 48.5 9.6Mounting
bracket33 30.59.50.5(10.5)Inner rail6.8 23.94.6Mounting
bracketRetainer4 35.30.5 (37.3)Outer rail(37.3)R4.55.2 9.5Cross
sectionStroke S ( 3) 216Inner rail
771150.8375267771050.92425305771001Mounting hole Outer
railPermissible load N/pairMass
kg/pair47631877901.1252736877831.2457841977731.3262944577661.4467949577611.6Note)
The Permissible Load and Mass each indicate when used as a pair of
2 units. Model number codingFBL35B +375L Model numberOverall rail
length (mm)A13-21Slide RailUnit: mmRail length L ( 0.8) 324 21.
Model FBL 35T Stroke length S 3Rail length L 0.8
C0.315.90.5(14.2)Access hole36.10.54.55.3B0.3 A0.3 111.10.3101.60.3
D0.3 E0.3 25.40.54.55.3 12.70.8 Cabinet railF0.3 Rail length (L-3)
0.871.40.8Drawer rail1.61.6Retainer Cross section Unit: mmRail
length Stroke L S ( 0.8) ( 3) 305 227Mounting hole
dimensionsMounting holeABCDEF149.2273.0152.8254.44Permissible load
N/pairMass kg/pair411202.16Inner rail Outer
rail356278200.0323.8203.6305.24410702.56406303250.8374.6254.4356.04410202.96457354212.7301.6425.4203.2305.2406.85510003.3508367238.1352.4476.2228.6356.0457.6559713.64559430263.5403.2527.0254.0406.8508.4559224.04610456288.9454.0577.8279.4457.6559.2558734.32660468314.3504.8628.6304.8508.4610.0558434.72711506339.7555.6679.4330.2559.2660.8557845.1Note)
The Permissible Load and Mass each indicate when used as a pair of
2 units. Model number codingFBL35T +559L Model numberA13-22Overall
rail length (mm)To download a desired data, search for the
corresponding model number in the Technical
site.https://tech.thk.com 22. Model FBL 27DStroke length S3Rail
length L 0.8 B0.3 A0.3200.5 2- 4.5 (both ends)1000.3 200.34.26200.3
1000.3Access holeA0.3 B0.3 Rail length L0.8200.54.2 6Cabinet rail2-
4.5 (both ends)Center rail270.5Drawer rail1.61.6 Retainer 19.10.5
Cross sectionRail length L ( 0.8)Stroke S ( 3)200Mounting hole
dimensionsMounting holePermissible load N/pair Cabinet railMass
kg/pairABDrawer
rail229140.0160.055370250276190.0210.0553600.8300327240.0260.0553500.96350376290.0310.0553301.12400426340.0360.0553101.28450475390.0410.0552901.46500524440.0460.0552801.60.64Note)
The Permissible Load and Mass each indicate when used as a pair of
2 units. Model number codingFBL27D +200L Model number Overall rail
length (mm)A13-23Slide RailUnit: mm 23. Model FBL 35EStroke length
S3Rail length L0.8 G0.3 F0.3 E0.319.10.5D0.3 25.40.3 A0.3 B0.3
19.10.54.55.3C0.3 Rail length (L-11) 0.8Rubber cushion 4.55.3Access
hole1335.31.6 2.21.6 2.4 15.3 24.9Cross section Unit: mmRail length
L ( 0.8)Stroke S ( 3)ABCDEF30533076.2154.976.2190.5241.3Mounting
hole dimensions GPermissible load N/pairMass
kg/pair266.72900.6356381127266.788.9215.9292.1317.52800.7406432152.4317.5127241.3342.9368.32700.9457483177.8368.3127292.1393.7419.12501.1508533152.4342.9419.1152.4317.5444.5469.92401.3Note1)
To mount model FBL35E, use an M3 truss and binding machine screws.
Note2) The Permissible Load and Mass each indicate when used as a
pair of 2 units. Model number codingFBL35E +406L Model
No.A13-24Overall rail length (mm)To download a desired data, search
for the corresponding model number in the Technical
site.https://tech.thk.com 24. Model FBL 35E-P14 Stroke length
S3Rail length L 0.8 15.90.5Automatic free disconnection springD 0.3
C0.3 B 0.3 A0.3 111.10.3 25.40.3 12.70.312.70.3 25.40.34.55.3Access
holeRubber cushion 4.55.3101.60.3 E0.3 F0.3130.5Outer rail Center
rail35.30.51.6 1.61.615.3 24.9G0.3 Rail length (L-11)
0.815.90.5Inner rail Retainer Cross sectionMounting hole
dimensionsRail length Stroke L S ( 0.8) ( 3)Mounting holeMass
kg/pair305330149.2 260.3 273.0 233.1 254.0 266.72940.88356381200.0
311.1 323.8 258.5 304.8 317.5772841.04406432250.8 361.9 374.6 283.9
355.6 368.3772751.16457483212.7 301.6 412.7 425.4 309.3 406.4
419.1782551.32508533238.1 352.4 463.5 476.2 334.7 457.2
469.9782351.48BCDEFGOuter rail 7Permissible load N/pairInner rail
7ANote) The Permissible Load and Mass each indicate when used as a
pair of 2 units. Model number codingFBL35E-P14 +508L Model
numberOverall rail length (mm)A13-25Slide RailUnit: mm 25. Model
FBL 35G-P13 Stroke length S3Rail length L0.8 E0.3 D0.315.90.5
123.80.3 12.70.3Disconnection spring Access hole4.55.3 A0.3F0.3
Lock mechanism4.55.312.70.3 25.40.3 111.1 0.3Lead stick B 0.3 C 0.3
D0.3 E0.3Rubber cushion Rubber cushion19.10.5 Cabinet
rail15.90.5Drawer rail35.30.5Rail length (L-4) 0.8 1.61.6Retainer
Center rail Cross section Unit: mmMounting hole dimensionsRail
length Stroke L S ( 0.8) ( 3)ABMounting holeCDEFDrawer Cabinet rail
rail 5 6Permissible load N/pairMass
kg/pair305327260.3273.06231.2356378298.4311.1323.8665861.4406429349.2361.9374.6250.8675551.6457480212.7400.0412.7425.4301.6775161.8508530238.1365.1450.8463.5476.2352.4874752559581263.5415.9501.6514.3527.0403.2874442.2610632288.9466.7552.4565.1577.8454.0874132.4660683314.3517.5603.2615.9628.6504.8873822.6711734339.7568.3654.0666.7679.4555.6873552.8Note)
The Permissible Load and Mass each indicate when used as a pair of
2 units. Model number codingFBL35G-P13 +356L Model
numberA13-26Overall rail length (mm)To download a desired data,
search for the corresponding model number in the Technical
site.https://tech.thk.com 26. Model FBL 35G-P14 Rail length
L0.8Stroke length S 3E0.3 D0.315.90.5 123.80.3 12.70.3Automatic
free disconnection spring Access hole4.55.3 A0.3F0.3 Lock
mechanism4.55.312.70.3 25.40.3 111.10.3Lead stick B0.3 C0.3 D0.3
E0.3Rubber cushion Rubber cushion19.10.5 Cabinet rail15.90.5Drawer
rail35.30.5Rail length (L-4) 0.81.61.6Retainer Center rail Cross
sectionMounting hole dimensionsRail length Stroke L S ( 0.8) (
3)ABMounting holeCDEFDrawer Cabinet rail rail 5 6Permissible load
N/pairMass
kg/pair305327260.3273.06231.2356378298.4311.1323.8665861.4406429349.2361.9374.6250.8675551.6457480212.7400.0412.7425.4301.6775161.8508530238.1365.1450.8463.5476.2352.4874752559581263.5415.9501.6514.3527.0403.2874442.2610632288.9466.7552.4565.1577.8454.0874132.4660683314.3517.5603.2615.9628.6504.8873822.6711734339.7568.3654.0666.7679.4555.6873552.8Note)
The Permissible Load and Mass each indicate when used as a pair of
2 units. Model number codingFBL35G-P14 +610L Model numberOverall
rail length (mm)A13-27Slide RailUnit: mm 27. Model FBL 35D Rail
length L 0.8Stroke length S3 15.90.5D0.3 C0.3 B0.3 A0.3 111.10.3
25.40.3 12.70.34.55.312.70.3 25.40.3 111.1 0.3 A0.3 B0.3 C0.3 D0.3
Rail length L 0.84.55.3Access hole19.10.5 Cabinet
rail15.90.535.30.5Drawer rail1.61.6Retainer Center rail Cross
section Unit: mmRail length L ( 0.8)Stroke S ( 3)Mounting hole
dimensionsMounting holeMass
kg/pair305327149.2260.3273.05881.28356378200.0311.1323.8775781.48406429250.8361.9374.6775591.72457480212.7301.6412.7425.4885491.96BCDCabinet
rail 7Permissible load N/pairDrawer rail
7A508530238.1352.4463.5476.2885292.12559581263.5403.2514.3527.0885002.4610632288.9454.0565.1577.8884802.56660683314.3504.8615.9628.6884612.8711734339.7555.6666.7679.4884413Note)
The Permissible Load and Mass each indicate when used as a pair of
2 units. Model number codingFBL35D +711L Model numberA13-28Overall
rail length (mm)To download a desired data, search for the
corresponding model number in the Technical
site.https://tech.thk.com 28. Model FBL 35W 5 5 Rail length L 0.8 D
0.3 C 0.3 B 0.315.90.5A 0.3 111.1 0.3 25.4 0.3 12.7 0.3Rubber
cushion 4.55.3Rubber cushion 12.70.8Access hole15.90.335.3
0.512.70.3 25.40.3 111.10.3 A0.3 B0.3 C0.3 D0.3 Rail length L0.84.5
5.31.6460.5Access holeDrawer rail Center rail 1.681.30.8Stroke
length S 31.6Cross section Cabinet rail Note) The product has a
rubber cushion. If desiring to keep the length within the rail
length when storing the product, remove the rubber cushion. Unit:
mmRail length L ( 0.8) 305 356 406 457 508 559 610 660 711Stroke S
( 3) 327 378 429 480 530 581 632 683 734Mounting hole dimensions
ABCD 225.4 250.8 276.2 301.6 327.0 352.4149.2 200.0 250.8 301.6
352.4 403.2 454.0 504.8 555.6260.4 311.2 362.0 412.8 463.6 514.4
565.2 616.0 666.8273.1 323.9 374.7 425.5 476.3 527.1 577.9 628.7
679.5Mounting hole Drawer Cabinet rail rail 7 7 7 7 7 7 8 8 8 8 8 8
8 8 8 8 8 8Permissible load N/pairMass kg/pair706 676 637 598 569
520 480 422 3531.68 2 2.32 2.64 2.88 3.2 3.52 3.84 4.12Note) The
Permissible Load and Mass each indicate when used as a pair of 2
units. Model number codingFBL35W +356L Model numberOverall rail
length (mm)A13-29Slide RailRetainer 29. Model FBL 51H Rail length
L0.8Stroke length S3 19.10.5G0.3 F0.3 E0.3 D0.3
25.40.34.55.3A0.3Access holeRubber cushion4.5 5.3B0.3 Outer rail
19.10.5C0.3Center rail t1.651.50.5Rail length (L-11) 0.8 1.6 Inner
rail 1.8Retainer12.70.5 Cross section Unit: mmRail length L ( 0.8)
305 356 406 457 508 559 610 660 711 762Stroke S ( 3) 330 381 432
483 533 584 635 686 737 787Mounting hole dimensions ABCDEFG76.2
101.6 127.0 127.0 152.4 177.8 177.8 203.2 228.6 228.6177.8 203.2
228.6 279.4 304.8 330.2 381.0 406.4 431.8 457.2254.0 304.8 355.6
406.4 457.2 508.0 558.8 609.6 660.4 711.276.2 88.9 127.0 127.0
152.4 177.8 177.8 203.2 228.6 228.6190.5 215.9 241.3 292.1 317.5
342.9 393.7 419.1 444.5 469.9241.3 292.1 342.9 393.7 444.5 495.3
546.1 596.9 647.7 698.5266.7 317.5 368.3 419.1 469.9 520.7 571.5
622.3 673.1 723.9Mounting hole Inner Outer rail rail 4 6 4 6 4 6 4
6 4 6 4 6 4 6 4 6 4 6 4 6Permissible load Mass N/pair kg/pair 850
820 770 730 710 690 660 630 610 5801.46 1.72 1.89 2.26 2.52 2.72
3.00 3.25 3.54 3.86Note) The Permissible Load and Mass each
indicate when used as a pair of 2 units. Model number codingFBL51H
+610L Model numberA13-30Overall rail length (mm)To download a
desired data, search for the corresponding model number in the
Technical site.https://tech.thk.com 30. Model FBL 51H-P13 Stroke
length S3 19.10.54.5 5.3Disconnection springLead stickRail length L
0.8 G0.3 F 0.3 E0.3 D0.3 Lock 25.40.3 mechanismAccess holeA 0.3
19.10.54.5 5.3Rubber cushionB0.3 C0.3Outer rail Center rail
t1.651.50.5Rail length (L-11) 0.8Inner rail 1.6 Retainer1.812.70.5
Cross sectionRail length L ( 0.8)Stroke S ( 3)305 356Mounting hole
dimensionsMounting holePermissible load Mass N/pair kg/pair190.5
241.3 266.7Inner rail 3Outer rail 68501.46215.9 292.1
317.5368201.72304.8 127.0 241.3 342.9 368.3367701.89483127.0 317.5
368.3 127.0 292.1 393.7 419.1467302.26508533152.4 355.6 406.4 152.4
317.5 444.5 469.9467102.52559584177.8 381.0 457.2 177.8 342.9 495.3
520.7466902.72610635177.8 430.8 508.0 177.8 393.7 546.1
571.5466603.00ABCD33076.2190.576.2381101.6266.788.9406432127.0457EFG660686203.2
457.2 558.8 203.2 419.1 596.9 622.3466303.25711737228.6 508.0 609.6
228.6 444.5 647.7 673.1466103.54762787228.6 533.4 660.4 228.6 469.9
698.5 723.9465803.86Note) The Permissible Load and Mass each
indicate when used as a pair of 2 units. Model number
codingFBL51H-P13 +559L Model numberOverall rail length
(mm)A13-31Slide RailUnit: mm 31. Model FBL 51H-P14 Rail length L
0.8Stroke length S3 19.10.5G0.3 F0.3 E0.3Automatic free
disconnection spring4.55.3D0.3 25.40.3Lead stickA0.3Rubber cushion
4.55.3Access holeB0.3Outer rail Center rail t1.6C0.319.10.551.5
0.5Rail length (L-11) 0.81.6 Inner rail 1.8Retainer12.70.5 Cross
section Unit: mmRail length L ( 0.8)Stroke S ( 3)Mounting hole
dimensionsMounting hole30533076.2254.076.2190.5 241.3
266.78501.46356381127.0304.888.9215.9 292.1
317.5368201.72406432152.4 317.5 355.6 127.0 241.3 342.9
368.3467701.89457483177.8 368.3 406.4 127.0 292.1 393.7
419.1467302.26BCDEFGOuter rail 6Permissible load Mass N/pair
kg/pairInner rail 3A508533152.4 419.1 457.2 152.4 317.5 444.5
469.9467102.52559584177.8 469.9 508.0 177.8 342.9 495.3
520.7466902.72610635177.8 520.7 558.8 177.8 393.7 546.1
571.5466603.00660686203.2 571.5 609.6 203.2 419.1 596.9
622.3466303.25711737228.6 622.3 660.4 228.6 444.5 647.7
673.1466103.54762787228.6 673.1 711.2 228.6 469.9 698.5
723.9465803.86Note) The Permissible Load and Mass each indicate
when used as a pair of 2 units. Model number codingFBL51H-P14 +305L
Model numberA13-32Overall rail length (mm)To download a desired
data, search for the corresponding model number in the Technical
site.https://tech.thk.com 32. Model FBL 35K 5 5Stroke length S3
15.90.536.14.55.3Rail length L 0.8 C0.3 B0.3 A 0.3 111.10.3 4.5
5.3Rubber cushionAccess holeRubber cushion Cabinet rail t=1.6
Center rail t=1.615.90.571.4 0.8111.10.3 A 0.3 B 0.3 C 0.3 Rail
length L0.81.61.6Drawer rail t=1.6Cross section Note) The product
has a rubber cushion. If desiring to keep the length within the
rail length when storing the product, remove the rubber cushion.
Unit: mmRail length L ( 0.8) 305 356 406 457 508 559 610 660
711Stroke S ( 3) 327 378 429 480 530 581 632 683 734Mounting hole
dimensions ABC 212.7 238.1 263.5 288.9 314.3 339.7149.2 200.0 250.8
301.6 352.4 403.2 454.0 504.8 555.6273.0 323.8 374.6 425.4 476.2
527.0 577.8 628.6 679.4Mounting hole Permissible load Drawer
Cabinet N/pair rail rail 4 4 2670 4 4 2630 4 4 2540 5 5 2450 5 5
2360 5 5 2250 5 5 2120 5 5 1960 5 5 1780Mass kg/pair 4.04 4.8 5.6
6.04 6.92 7.56 8.4 9 9.68Note) The Permissible Load and Mass each
indicate when used as a pair of 2 units. Model number codingFBL35K
+711L Model numberOverall rail length (mm)A13-33Slide Rail23.90.8
33. Model FBL 56H Rail length L 0.8Stroke length S3 19.10.5G0.3
F0.3 E0.3 D0.3 25.40.34.55.3Access holeRubber cushion 4.55.3 Outer
railA0.3 B0.3 19.10.5Center rail t=1.6 C0.3Inner railRail length
(L-9.5) 0.8 2.0 560.52.0Retainer160.5 Cross section Unit: mmRail
length L ( 0.8) 305 356 406 457 508 559 610 660 711 762Stroke S (
3) 330 381 432 483 533 584 635 686 737 787Mounting hole dimensions
ABCDEFG76.2 101.6 127.0 127.0 152.4 177.8 177.8 203.2 228.6
228.6177.8 203.2 228.6 279.4 304.8 330.2 381.0 406.4 431.8
457.2254.0 304.8 355.6 406.4 457.2 508.0 558.8 609.6 660.4
711.276.2 88.9 127.0 127.0 152.4 177.8 177.8 203.2 228.6 228.6190.5
215.9 241.3 292.1 317.5 342.9 393.7 419.1 444.5 469.9241.3 292.1
342.9 393.7 444.5 495.3 546.1 596.9 647.7 698.5266.7 317.5 368.3
419.1 469.9 520.7 571.5 622.3 673.1 723.9Mounting hole Inner Outer
rail rail 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6Permissible load
N/pairMass kg/pair961 951 941 922 902 882 863 843 824 7841.76 2.04
2.36 2.64 2.96 3.24 3.6 3.84 4.06 4.44Note) The Permissible Load
and Mass each indicate when used as a pair of 2 units. Model number
codingFBL56H +406L Model numberA13-34Overall rail length (mm)To
download a desired data, search for the corresponding model number
in the Technical site.https://tech.thk.com 34. Model FBL 56H-P13
Stroke length S3Rail length L 0.8 G0.3 F0.3 E0.319.10.5
Disconnection spring 4.55.3D0.325.4 0.3Lock mechanismA0.3 B0.3
19.10.54.5 5.3Lead stickC0.3Rubber cushionAccess holeRail length
(L-11) 0.8Outer rail Center rail t=1.6 Inner rail560.5Retainer
2.02.0160.5 Unit: mmRail length L ( 0.8) 305 356 406 457 508 559
610 660 711 762Stroke S ( 3) 330 381 432 483 533 584 635 686 737
787Mounting hole dimensions ABCDEFG76.2 127.0 152.4 177.8 152.4
177.8 177.8 203.2 228.6 228.6 317.5 368.3 419.1 469.9 520.7 571.5
622.3 673.1254.0 304.8 355.6 406.4 457.2 508.0 558.8 609.6 660.4
711.276.2 88.9 127.0 127.0 152.4 177.8 177.8 203.2 228.6 228.6190.5
215.9 241.3 292.1 317.5 342.9 393.7 419.1 444.5 469.9241.3 292.1
342.9 393.7 444.5 495.3 546.1 596.9 647.7 698.5266.7 317.5 368.3
419.1 469.9 520.7 571.5 622.3 673.1 723.9Mounting hole Inner Outer
rail rail 3 6 3 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6Permissible load
N/pairMass kg/pair961 951 941 922 902 882 863 843 824 7841.76 2.04
2.36 2.64 2.96 3.24 3.6 3.84 4.06 4.44Note) The Permissible Load
and Mass each indicate when used as a pair of 2 units. Model number
codingFBL56H-P13 +762L Model numberOverall rail length
(mm)A13-35Slide RailCross section 35. Model FBL 56H-P14 Stroke
length S3Rail length L 0.8 G 0.3 F0.3 E0.319.10.5 Automatic free
disconnection springD 0.3 25.40.3Lead stick4.55.3A0.3 Access
holeB0.3 19.10.5C0.3 Rail length (L-11) 0.84.5 5.3 Rubber cushion
Outer rail Center rail t=1.6 Inner rail560.5Retainer 2.02.0160.5
Cross section Unit: mmRail length L ( 0.8) 305 356 406 457 508 559
610 660 711 762Stroke S ( 3) 330 381 432 483 533 584 635 686 737
787Mounting hole dimensions ABCDEFG76.2 127.0 152.4 177.8 152.4
177.8 177.8 203.2 228.6 228.6 317.5 368.3 419.1 469.9 520.7 571.5
622.3 673.1254.0 304.8 355.6 406.4 457.2 508.0 558.8 609.6 660.4
711.276.2 88.9 127.0 127.0 152.4 177.8 177.8 203.2 228.6 228.6190.5
215.9 241.3 292.1 317.5 342.9 393.7 419.1 444.5 469.9241.3 292.1
342.9 393.7 444.5 495.3 546.1 596.9 647.7 698.5266.7 317.5 368.3
419.1 469.9 520.7 571.5 622.3 673.1 723.9Mounting hole Inner Outer
rail rail 3 6 3 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6 4 6Permissible load
N/pairMass kg/pair961 951 941 922 902 882 863 843 824 7841.76 2.04
2.36 2.64 2.96 3.24 3.6 3.84 4.06 4.44Note) The Permissible Load
and Mass each indicate when used as a pair of 2 units. Model number
codingFBL56H-P14 +457L Model numberA13-36Overall rail length (mm)To
download a desired data, search for the corresponding model number
in the Technical site.https://tech.thk.com 36. Model FBL 35F Rail
length L 0.8 Stroke length S 3A 0.8 B 0.36.21.6 84
4.5101.60.34.55.31.6600.8 47.6 0.3Access holeC 0.3 D0.3 E 0.3
25.40.5Mounting plate Outer rail Mass305 356 406 457 508 559 610
660 711 762Mounting plate Model No. #3 0.60 0.66 0.73 0.80 0.86
0.93 1.0 1.06 1.13 1.20#4 0.67 0.73 0.80 0.87 0.93 1.0 1.07 1.13
1.20 1.27#5 0.74 0.80 0.87 0.94 1.0 1.07 1.14 1.20 1.27 1.34#6 0.81
0.87 0.94 1.01 1.07 1.14 1.21 1.27 1.34 1.41#7 0.94 1.01 1.08 1.14
1.21 1.28 1.34 1.41 1.48#8 1.01 1.08 1.15 1.21 1.28 1.35 1.41 1.48
1.55Retainer 35.3 0.5Rail length L ( 0.8) mmInner railUnit:
kg/pair1.69.5 11.1 0.51.6Cross sectionNote) The mass indicates the
value for a pair of 2 product units.Mounting plateModel
No.#3#4#5#6#7#8Length (A 0.8)76.2101.6127152.4177.8203.2Rail length
L ( 0.8) Stroke length S ( 3) Varies with the combination with the
mounting plate above. 305 225.4 200.0 174.6 149.2 356 276.2 250.8
225.4 200.0 174.6 149.2 406 327.0 301.6 276.2 250.8 225.4 200.0 457
377.8 352.4 327.0 301.6 276.2 250.8 508 428.6 403.2 377.8 352.4
327.0 301.6 559 479.4 454.0 428.6 403.2 377.8 352.4 610 530.2 504.8
479.4 454.0 428.6 403.2 660 581.0 555.6 530.2 504.8 479.4 454.0 711
631.8 606.4 581.0 555.6 530.2 504.8 762 682.6 657.2 631.8 606.4
581.0 555.6 Pitch of the mounting plate mounting hole 60.2 85.6
111.0 136.4 161.8 187.2 (B 0.3) Permissible load (N/pair) 294 392
490 588 686 784Dimension of the outer rail mounting hole ( 0.3) C
203.2 228.6 254.0 279.4 304.8 330.2 355.6D 152.4 203.2 254.0 304.8
355.6 406.4 457.2 508.0 558.8 609.6E 254.0 304.8 355.6 406.4 457.2
508.0 558.8 609.6 660.4 711.2Note) The Permissible Load and Mass
each indicate when used as a pair of 2 units. Model number
codingFBL35F +356L #5 Model numberModel number of mounting
plateOverall rail length (mm)A13-37Slide RailUnit: mm 37. Model FBL
56F 4 4.52 4.55.3Access hole800.8 67.60.32 8Outer rail length L0.8
Stroke length S3A0.8 B0.36.2101.60.3 C0.3160.5D0.3Mass305 356 406
457 508 559 610 660 711 762Inner railUnit: kg/pairMounting plate
Model No. #3 1.16 1.32 1.46 1.59 1.73 1.87 2.0 2.14 2.28 2.41#4
1.31 1.44 1.58 1.71 1.85 1.99 2.13 2.26 2.40 2.54#5 1.43 1.57 1.70
1.84 1.98 2.11 2.25 2.39 2.52 2.66#6 1.55 1.69 1.83 1.96 2.10 2.24
2.37 2.51 2.65 2.78#7 1.81 1.95 2.09 2.22 2.36 2.50 2.63 2.77
2.912#8 1.94 2.07 2.21 2.35 2.48 2.62 2.76 2.89 3.03560.5Rail
length L ( 0.8) mm140.5E0.325.40.52Retainer Outer rail Mounting
plate 2Cross sectionNote) The mass indicates the value for a pair
of 2 product units. Unit: mmMounting plateModel
No.#3#4#5#6#7#8Length (A 0.8)76.2101.6127152.4177.8203.2Rail length
L ( 0.8) Stroke length S ( 3) Varies with the combination with the
mounting plate above. 305 224.6 199.2 173.8 148.4 356 275.4 250.0
224.6 199.2 173.8 148.4 406 326.2 300.8 275.4 250.0 224.6 199.2 457
377.0 351.6 326.2 300.8 275.4 250.0 508 427.8 402.4 377.0 351.6
326.2 300.8 559 478.6 453.2 427.8 402.4 377.0 351.6 610 529.4 504.0
478.6 453.2 427.8 402.4 660 580.2 554.8 529.4 504.0 478.6 453.2 711
631.0 605.6 580.2 554.8 529.4 504.0 762 681.8 656.4 631.0 605.6
580.2 554.8 Pitch of the mounting plate mounting hole 60.2 85.6
111.0 136.4 161.8 187.2 (B 0.3) Permissible load (N/pair) 588 784
980 1176 1372 1568Dimension of the outer rail mounting hole ( 0.3)
C 203.2 228.6 254.0 279.4 304.8 330.2 355.6D 152.4 203.2 254.0
304.8 355.6 406.4 457.2 508.0 558.8 609.6E 254.0 304.8 355.6 406.4
457.2 508.0 558.8 609.6 660.4 711.2Note) The Permissible Load and
Mass each indicate when used as a pair of 2 units. Model number
codingFBL56F +305L #6 Model numberModel number of mounting
plateOverall rail length (mm)A13-38To download a desired data,
search for the corresponding model number in the Technical
site.https://tech.thk.com 38. Model FBL 48DRRail length L1 Inner
rail length L22 20 4040P35040Stroke length S 4030n- 6 through206-M5
through2Access holeA30 7.3 Inner rail28.248 2 2 Retainer Outer rail
t=1.6 11.2Reinforced channelCross section Unit: mmOuter rail length
Inner rail length Stroke length Mounting hole pitch No. of mounting
holes Permissible load L1 L2 S A n [N] 1110 496 610 P3503 4 490
1110 696 410 P3503 4 686 1460 496 960 P3504 5 490 1460 696 760
P3504 5 686 1810 696 1110 P3505 6 686 2160 496 1660 P3506 7 490
2160 696 1460 P3506 7 686Mass [kg] 2.73 2.88 3.47 3.62 4.36 4.95
5.10Note1) Set the length of the mounting screws for the inner rail
such that they do not touch the retainer. Note2) Model FBL48DR
differs from other slide rails by assuming use with a single rail.
Therefore, the value is per single rail for permissible load.Model
number codingFBL48DR +1810/696L Model numberOuter rail length L1
(mm)Inner rail length L2 (mm)A13-39Slide Rail14.6 39. Model E36RS
Rail length L 0.8n 10025Permissible load100 0.3(25)Countersink for
(n+1)-M46 Stroke length S376 120.5 8(12.5)1.6(52)360.5500.1Slider
600.3Outer rail4- 4.5(4 )(45)Resin bearing 50.752600.1 700.35Unit:
mmRail length L ( 0.8) 150 250 350 450 550 650 750Stroke length S (
3) 68 168 268 368 468 568 668n 1 2 3 4 5 6 7Mounting hole n+1 2 3 4
5 6 7 8Note1)Permissible load N 40 40 40 40 40 40 40Mass g 104 130
156 182 207 233 259Note) Model E36RS differs from other slide rails
by assuming use with a single rail. Therefore, the value is per
single rail for permissible load.Model number codingE36RS +550L
Model number Rail length (mm)A13-40To download a desired data,
search for the corresponding model number in the Technical
site.https://tech.thk.com 40. Model E15Rail length L0.8Stroke
length S3 100.5A0.3 Access hole2-M3 throughA0.3100.5Countersink for
2-M2.6 (for class 1 countersink screw No. 0)Rail length
L0.84.5Outer rail19150.5Inner rail50.5BallCross sectionRail length
L ( 0.8)Stroke S ( 3)Mounting hole dimensions A 0.3Permissible load
N/pairMass
[g/pair]502030.0515804560.08241006080.0103012075100.01036Note) The
Permissible Load and Mass each indicate when used as a pair of 2
units.Model number codingE15 +100L Model number Overall rail length
(mm)A13-41Slide RailUnit: mm 41. Model E20Stroke length S 3Rail
length L 0.8 B 0.3150.5n-M4 throughA0.3(Access hole)A 0.3 150.5n-
3.5 90 countersunk ( 6)B 0.3 Rail length L 0.87.2 Outer
rail12200.51.6Inner rail 8 0.5BallCross sectionUnit: mmMounting
hole dimensionsRail length L ( 0.8)Stroke S ( 3)A 0.3B
0.3804550.010060150 200 300180n (pcs)Permissible load N/pairMass
[g/pair]2205070.0230628560.0120.03809812085.0170.03140131135.0270.03145197Note)
The Permissible Load and Mass each indicate when used as a pair of
2 units. Model number codingE20 +150L Model number Overall rail
length (mm)A13-42To download a desired data, search for the
corresponding model number in the Technical
site.https://tech.thk.com 42. Model D20Rail length L0.8Stroke
length S3 150.5Countersunk for n-M3A0.3 150.5B0.3 A0.3Countersunk
for n-M3Access holeB0.3 Rail length L0.8 7.2 Center rail200.5
12Cabinet rail1.6BallDrawer rail 160.5Unit: mmMounting hole
dimensionsRail length L ( 0.8)Stroke S ( 3)A 0.3B
0.3808050.0100100150n (pcs)Permissible load N/pairMass
[g/pair]2209470.023011816060.0120.038017920022385.0170.03140241300345135.0270.03145364Note)
The Permissible Load and Mass each indicate when used as a pair of
2 units. Model number codingD20 +300L Model number Overall rail
length (mm)A13-43Slide RailCross section 43. Point of DesignSlide
Rail[Permissible Load and Mounting Orientation] For use other than
with the mounting orientation shown in Fig.1, contact THK. The
permissible load of the Slide Rail indicates the load in the
direction Pa that two rails can receive in the middle of the inner
rail length at the maximum stroke. The mounting orientation shown
in Fig.2 is applicable to model FBL35B only.TopPaPaBottom Fig.1Top
PaPaBottom Fig.2 Applicable to model FBL35B onlyA13-44 44. Point of
Design The mounting orientation of Fig.3 is applicable to model
FBL35F and model FBL56F. The mounting orientation of Fig.4 is
applicable to model FBL48DR. To prevent a moment load from being
applied, position the center of gravity of the door on the ball and
the cage center lines, and ensure that the section A of the hanger
is structured to allow free rotation. The mounting orientation of
Fig.5 is applicable to model E36RS. Unlike other slide rails, model
FBL48DR and model E36RS are used with a single rail. Therefore, set
the load application position so that it is on the ball and the
cage center lines. TopPaPa BottomFig.3 Applicable to model FBL35F,
model FBL56FRail bearing Suspended fittingInner rail center
axisCenter of gravitySection A DoorCenter of gravityBall center
axisSlide RailFig.4 Applicable to model FBL48DRTopBottom PaPa Fig.5
Applicable to model E36RS[Surface Treatment] The surface of the
Slide Rail is electro-galvanized (treated with trivalent chromate)
as standard. The aluminum slide rail of models E and D is white
alumite-treated as standard. The slider of model E36RS is
electro-galvanized (trivalent chromate treatment) and the rail is
white alumite-treated as standard. For other surface treatments,
contact THK.A13-45 45. Model No.Slide RailModel Number Coding Model
number con gurations differ depending on the model features. Refer
to the corresponding sample model number con guration. [Single
slide/Double slide]Models FBL 27S, FBL 27S-P14, FBL 35S, FBL
35S-P13, FBL 35S-P14, FBL 35M, FBL 35J, FBL 35B, FBL 35T, FBL 27D,
FBL 35E, FBL 35E-P14, FBL 35G-P13, FBL 35G-P14, FBL 35D, FBL 35W,
FBL 51H, FBL 51HP13, FBL 51H-P14, FBL 35K, FBL 56H, FBL 56H-P13 and
FBL 56H-P14FBL27S +300L Model No.Overall rail length (in mm)[Linear
Type Slides]Models FBL35F and FBL56FFBL35F +356L #5 Model No.Model
number of mounting plate Overall rail length (in mm)[Heavy Load
Linear Type Slide]Model FBL48DRFBL48DR +1810/696L Model No.Outer
rail length Inner rail length (in mm) (in mm)[Linear Slide
Wheel-type]Model E36RSE36RS +550L Model number Rail length
(mm)A13-46 46. Model No. [Aluminum Alloy Slide Rail]Models E15, E20
and D20E15 +100L Model No. Overall rail length (in mm)Slide
RailA13-47 47. Precautions on UseSlide Rail[Handling] (1) Tilting a
slide rail may cause it to fall by its own weight. (2) Dropping or
hitting the Slide Rail may damage it. Giving an impact force to the
slide rail could also cause damage even if the product looks
intact. [Precautions on Use] (1) When mounting the Slide Rail, use
care to always keep both rails in parallel. (2) Entrance of foreign
material may cause damage to the Slide Rail or functional loss. (3)
Avoid using the product at other than normal temperature, or using
it in harsh conditions such as intensive reciprocations that
generate frictional heat and environments with water or dust. (4)
The durability of the Slide Rail varies depending on factors such
as the drawing dimension, travel distance, mounting conditions and
environment in addition to operating frequency. Take these factors
into account when making a selection. (5) Note that the cage may be
displaced due to vertical installation, machine vibration, etc. To
correct the cage position, perform the full-close and full-open
operations. During these operations, the balls slip to make the
sliding motion less smooth. If cage displacement cannot be
prevented, we recommend using Slide Packs, LM Guides, etc., which
are in nite linear motion systems. (6) If you replace an old slider
or outer rail of your E36RS with a new one, the clearance and
sliding resistance may substantially increase. [Storage] When
storing the Slide Rail, avoid high temperature, low temperature and
high humidity.A13-48