Copyright © 2012-2014, Astro Devices. All rights reserved. 1 SkyWatcher: Encoders Installation This kit is suitable for SkyWatcher classic 6”-16” and Collapsible up to 16”. Please unpack all parts from the encoder kit. Make sure that your kit contains the following parts:. Please note the encoder on the left is for the altitude.
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Copyright©2012-2014,AstroDevices.Allrightsreserved.
1
SkyWatcher:EncodersInstallationThiskitissuitableforSkyWatcherclassic6”-16”andCollapsibleupto16”.
Pleaseunpackallpartsfromtheencoderkit.Makesurethatyourkitcontainsthefollowingparts:.
Pleasenotetheencoderontheleftisforthealtitude.
Copyright©2012-2014,AstroDevices.Allrightsreserved.
2
Azimuthencoderinstallation
• Theazimuthpivotboltneedstobereplacedwiththesuppliedazimuthpivotbolt.Unscrewtheexistingazimuthpivotboltandremovetherockerbox(putawaytheboltandthenutbutkeeptheplasticbushing):
• Locatethenewazimuthpivotbolt,insertitintotheplasticbushing:
• Inserttheboltwiththebushingintotheholeinthegroundboard:
Copyright©2012-2014,AstroDevices.Allrightsreserved.
3
• Turnthegroundboardupsidedownwhileholdingtheboltinplace:
• Locateasquarealuminiummountingplate• Screwthemountingplateontotheboltwiththesurfacewithconcentriccircles
finishfacingthegroundboard
• Fixthemountingplatewiththescrewsprovided
Copyright©2012-2014,AstroDevices.Allrightsreserved.
4
• Unscrewthebolt,turnthegroundaround,inserttheplasticbushingandawhite
plasticwasher
• Carefullyputtherockerboxontopofthegroundboard,inserttheboltwithametalwasherandscrewittightly(butmakesurethattherockerboxcanrotate):
Copyright©2012-2014,AstroDevices.Allrightsreserved.
5
• Puttherockerboxwiththegroundboardonitssideandfixtheboltwiththenutprovided:
• Positiontherockerboxwiththegroundboardnormallyandinserttheazimuth
encoder’sshaftintotheholeinthepivotbolt:
• Inserttheanchorboltintotheslotontheencoder’sarm,markitsplacewithapencil:
• Removetheencoderandfixtheanchorbolt’sfootwiththescrewprovided:
Copyright©2012-2014,AstroDevices.Allrightsreserved.
6
• Puttheencoderbackon,tightenthegrubscrew(onthepivotbolttoholdtheencodershaft),installthecabletieandconnecttheencodercable:
AltitudeEncoderInstallation
• Thealtitudeencodercanbeinstalledoneithersideoftherockerbox.Removethecarryhandlefrom(theonewiththeshorterthreadandwithouttheballbearings).Screwtheencodershaftcouplerprovidedinitsplace:
• InserttheAltitudeencoderintothecoupler:
Copyright©2012-2014,AstroDevices.Allrightsreserved.
7
• Inserttheanchorboltintotheslot,positionitlikeonthephotoandmarkits
placewithapencil:
Copyright©2012-2014,AstroDevices.Allrightsreserved.
8
• Removetheencoderandfixtheanchorbolt’sfootwithscrewsprovided:
Puttheencoderbackon,tightenthethumbscrew,connecttheencodercable:
Copyright©2012-2014,AstroDevices.Allrightsreserved.
9
Finished!
Related Documents
