Top Banner
Sketching Angles Sketching Angles And Coterminal Angles And Coterminal Angles
23

Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

Dec 17, 2015

Download

Documents

Tyler Lee
Welcome message from author
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Page 1: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

Sketching AnglesSketching Angles

And Coterminal AnglesAnd Coterminal Angles

Page 2: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

Standard PositionStandard Position

An angle is in standard position if its An angle is in standard position if its vertex is at the origin and its initial vertex is at the origin and its initial side is along the positive x-axis.side is along the positive x-axis.

Page 3: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

Link to Link to

http://www.mathopenref.com/degreehttp://www.mathopenref.com/degrees.htmls.html

Page 4: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

Quadrantal Angles Quadrantal Angles

Quadrant I

0° < θ < 90°

Quadrant II

90° < θ < 180°

Quadrant III

180° < θ < 270°

Quadrant IV

270° < θ < 360°

90°

180°

270°

360°

Angles in standard position having their terminal sides along the x-axis or y-axis are called Quadrantal angles. (shown in red)

Page 5: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

Let’s PracticeLet’s Practice

Take your white board and sketch Take your white board and sketch each angle in standard position. each angle in standard position. Indicate its rotation by a curved Indicate its rotation by a curved arrow. Classify each angle by it’s arrow. Classify each angle by it’s quadrant.quadrant.

1) 50°1) 50° 2) 120 °2) 120 ° 3) 260 °3) 260 ° 4) 300 °4) 300 °

Page 6: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

AnswersAnswers

Take your white board and sketch Take your white board and sketch each angle in standard position. each angle in standard position. Indicate its rotation by a curved Indicate its rotation by a curved arrow. Classify each angle by it’s arrow. Classify each angle by it’s quadrant.quadrant.

1) 50° I1) 50° I 2) 120 ° II2) 120 ° II 3) 260 ° III3) 260 ° III 4) 300 ° IV4) 300 ° IV

Page 7: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

ReviewReview

A A quadrantal anglequadrantal angle is one that is one that has its terminal side on one of has its terminal side on one of the coordinate axes.the coordinate axes.

What are the four quadrantal What are the four quadrantal angles?angles?

Page 8: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

4 Quadrantal angles4 Quadrantal angles

90° 90°

180° (1/2 revolution)180° (1/2 revolution)

270° 270°

360° (1 complete revolution)360° (1 complete revolution)

Page 9: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

Practice - Sketch each angle in Practice - Sketch each angle in standard position. Indicate it’s rotation standard position. Indicate it’s rotation by a curved arrow. Classify each angle by a curved arrow. Classify each angle

by its quadrant. If the angle is a by its quadrant. If the angle is a quadrantal angle, say so. This is on quadrantal angle, say so. This is on

your worksheet.your worksheet.

1) 135°1) 135° 2) -2402) -240 3) 403) 40 4) -3004) -300 5) -2705) -270 6) 3156) 315 7) 2907) 290 8) -908) -90 10) 49510) 495 11) -81011) -810 12) 75012) 750

Page 10: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

ANSWERSANSWERS

1) II1) II 2) II2) II 3) I3) I 4) I4) I 5) Quadrantal Angle5) Quadrantal Angle 6) IV6) IV 7) IV7) IV 8) Quadrantal 8) Quadrantal

AngleAngle 10) II10) II 11) Quadrantal Angle 12) I11) Quadrantal Angle 12) I

Page 11: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

Coterminal AnglesCoterminal Angles

Coterminal anglesCoterminal angles are angles are angles that have the same terminal side that have the same terminal side (unlimited). (unlimited).

60° and 420°

(360 + 60)

One revolution + 60

HAVE THE SAME TERMINAL SIDE

Page 12: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

The UNIT CIRCLEThe UNIT CIRCLE

This unit circle will be essential to This unit circle will be essential to our study in trig.our study in trig.

You will want to study it daily You will want to study it daily because we will be adding new because we will be adding new pieces of information to it pieces of information to it constantly. Yes, you will need to constantly. Yes, you will need to memorize it!memorize it!

Today we will label the positive Today we will label the positive angles.angles.

Page 13: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

Try this exampleTry this example

Find the angle of smallest positive Find the angle of smallest positive measure coterminal with this angle.measure coterminal with this angle.

908°908°

Page 14: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

Try this exampleTry this example

Find the angle of smallest positive Find the angle of smallest positive measure coterminal with this angle.measure coterminal with this angle.

908°908°

Hint: subtract off 360 as many times Hint: subtract off 360 as many times as need to obtain an angle with as need to obtain an angle with measure greater than 0 but less than measure greater than 0 but less than 360360

Page 15: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

Try this exampleTry this example

Find the angle of smallest positive Find the angle of smallest positive measure coterminal with this angle.measure coterminal with this angle.

908°908° 908 – 360 = 548 908 – 360 = 548

548 – 360 = 188548 – 360 = 188

So 188° is coterminal with an So 188° is coterminal with an angle of 908°angle of 908°

Page 16: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

How about a negative How about a negative angle?angle?

Find the angle of smallest positive Find the angle of smallest positive measure coterminal with this angle.measure coterminal with this angle.

-75°-75°

-75°

Page 17: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

How about a negative How about a negative angle?angle?

Find the angle of smallest positive Find the angle of smallest positive measure coterminal with this angle. measure coterminal with this angle. HINT: use of rotation of 360°HINT: use of rotation of 360°

-75°-75°

360 + (-75) = 285°360 + (-75) = 285°

-75°285°

Page 18: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

CoterminalCoterminal

Let n represent any integer, then all angles Let n represent any integer, then all angles coterminal with an angle of 150° can be coterminal with an angle of 150° can be expressed as 150° + (n x 360°)expressed as 150° + (n x 360°)

N = 0 then 150° + (0 x 360°) = 150 °N = 0 then 150° + (0 x 360°) = 150 ° N = 1 then 150° + (1 x 360°) = 510 °N = 1 then 150° + (1 x 360°) = 510 ° N = 2 then 150° + (2 x 360°) = 870 °N = 2 then 150° + (2 x 360°) = 870 ° N = -1 then 150° + (-1 x 360°) = -210 °N = -1 then 150° + (-1 x 360°) = -210 °

Page 19: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

Find the angle of smallest Find the angle of smallest positive measure positive measure

coterminal with each anglecoterminal with each angle If positive angle, keep subtracting If positive angle, keep subtracting

off 360° until it is in the range 0 < off 360° until it is in the range 0 < θθ < 360° < 360°

If negative angle, then add 360°If negative angle, then add 360°

1)1) -40 °-40 ° 5) 539 °5) 539 °

2)2) -98 °-98 ° 6) 699 °6) 699 °

3)3) -125 °-125 ° 7) 850 °7) 850 °

4)4) -203 °-203 ° 8) 1000 °8) 1000 °

Page 20: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

AnswersAnswers

1) 320 °1) 320 ° 5) 179 °5) 179 ° 2) 262 °2) 262 ° 6) 339 °6) 339 ° 3) 235 °3) 235 ° 7) 130 °7) 130 ° 4) 157 °4) 157 ° 8) 280 °8) 280 °

Page 21: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

Now try in radiansNow try in radians

If positive angle, keep subtracting If positive angle, keep subtracting off 2off 2ππ until it is in the range 0 < until it is in the range 0 < θθ < 2< 2ππ

If negative angle, then add 2If negative angle, then add 2ππ

1)1) 1212ππ/5/5

2)2) 1717ππ/4/4

3)3) -7-7ππ/3/3

Page 22: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

AnswersAnswers

1) 121) 12ππ/5 - 10/5 - 10ππ/5 = /5 = 2 2ππ /5 /5 2) 172) 17ππ/4 - 8/4 - 8ππ/4 = 9/4 = 9ππ/4 now too large/4 now too large So subtract off 2 So subtract off 2 ππ and get 9 and get 9ππ/4 -8/4 -8ππ/4 = /4 = ππ/4 /4 3) -73) -7ππ/3 + /3 + 66ππ/3 = - /3 = - ππ /3 Now less than 0 so /3 Now less than 0 so

add 2 add 2 ππ - - ππ/3 + 6 /3 + 6 ππ /3 = 5 /3 = 5ππ/3/3

Fractions are fun!Fractions are fun!

Page 23: Sketching Angles And Coterminal Angles. Standard Position An angle is in standard position if its vertex is at the origin and its initial side is along.

HomeworkHomework

Page 453 #2-36 evenPage 453 #2-36 even

Packet p. 6Packet p. 6 Practice unit circlePractice unit circle