This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
SK100MLI07S5TD1E2
SEMITOP®E2
MLI-T
3-Level NPC
SK100MLI07S5TD1E2
Features*• Optimized design for superior thermal
performance• Low inductive design• Press-Fit contact technology• Split IGBT gates for optimized driving• 650V Trench5 IGBT (S5)• Rapid switching diode technology• Integrated NTC temperature sensor• UL recognized file no. E 63 532Typical Applications• UPS• Energy Storage Systems• SolarRemarks*• Recommended Tj,op=-40 ...+150 °C• IGBTs characteristics are valid for
Footnotes1) Please find further technical information on the SEMIKRON website.
2
Absolute Maximum Ratings Symbol Conditions Values UnitDiode5VRRM Tj = 25 °C 650 VIF λpaste=0.8 W/(mK)
Tj = 175 °CTs = 25 °C 97 ATs = 70 °C 77 A
IF λpaste=2.5 W/(mK)Tj = 175 °C
Ts = 25 °C 114 ATs = 70 °C 90 A
IFRM 200 AIFSM 10 ms, sin 180°, Tj = 25 °C 540 ATj -40 ... 175 °CModuleIt(RMS) ∆Tterminal at PCB joint = 30 K, per pin 30 ATstg module without TIM -40 ... 125 °CVisol AC, sinusoidal, t = 1 min 2500 V
Characteristics Symbol Conditions min. typ. max. UnitIGBT1VCE(sat) IC = 100 A
VGE = 15 Vchiplevel
Tj = 25 °C 1.35 1.75 VTj = 150 °C 1.56 2.06 V
VCE0 chiplevel Tj = 25 °C 0.92 1.02 VTj = 150 °C 0.82 0.97 V
rCE VGE = 15 Vchiplevel
Tj = 25 °C 4.3 7.3 mΩTj = 150 °C 7.4 11 mΩ
VGE(th) VGE = VCE, IC = 1 mA 3.2 4 4.8 VICES VGE = 0 V, VCE = 650 V, Tj = 25 °C 0.45 mACies VCE = 25 V
VGE = 0 Vf = 1 MHz 6.2 nF
Coes f = 1 MHz 0.176 nFCres f = 1 MHz 0.024 nFQG VGE = -15V ... +15V 480 nCRGint Tj = 25 °C 0 Ωtd(on) VCE = 300 V
IC = 100 AVGE = +15/-15 VRG on = 1.5 ΩRG off = 1.5 Ωdi/dton = 4170 A/µsdi/dtoff = 2930 A/µsdv/dt = 7710 V/µs
Tj = 150 °C 27 nstr Tj = 150 °C 22 nsEon Tj = 150 °C 0.36 mJtd(off) Tj = 150 °C 107 nstf Tj = 150 °C 29 ns
Eoff Tj = 150 °C 1.63 mJ
Rth(j-s) per IGBT, λpaste=0.8 W/(mK) 0.74 K/WRth(j-s) per IGBT, λpaste=2.5 W/(mK) 0.57 K/W
This is an electrostatic discharge sensitive device (ESDS) due to international standard IEC 61340.
*IMPORTANT INFORMATION AND WARNINGSThe specifications of SEMIKRON products may not be considered as guarantee or assurance of product characteristics ("Beschaffenheitsgarantie"). The specifications of SEMIKRON products describe only the usual characteristics of products to be expected in typical applications, which may still vary depending on the specific application. Therefore, products must be tested for the respective application in advance. Application adjustments may be necessary. The user of SEMIKRON products is responsible for the safety of their applications embedding SEMIKRON products and must take adequate safety measures to prevent the applications from causing a physical injury, fire or other problem if any of SEMIKRON products become faulty. The user is responsible to make sure that the application design is compliant with all applicable laws, regulations, norms and standards. Except as otherwise explicitly approved by SEMIKRON in a written document signed by authorized representatives of SEMIKRON, SEMIKRON products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury. No representation or warranty is given and no liability is assumed with respect to the accuracy, completeness and/or use of any information herein, including without limitation, warranties of non-infringement of intellectual property rights of any third party. SEMIKRON does not assume any liability arising out of the applications or use of any product; neither does it convey any license under its patent rights, copyrights, trade secrets or other intellectual property rights, nor the rights of others. SEMIKRON makes no representation or warranty of non-infringement or alleged non-infringement of intellectual property rights of any third party which may arise from applications. Due to technical requirements our products may contain dangerous substances. For information on the types in question please contact the nearest SEMIKRON sales office. This document supersedes and replaces all information previously supplied and may be superseded by updates. SEMIKRON reserves the right to make changes.