-
ZXUR 9000 GSMBase Station Controller
Radio Parameter Reference
Version: V6.50.102
ZTE CORPORATIONNo. 55, Hi-tech Road South, ShenZhen,
P.R.ChinaPostcode: 518057Tel: +86-755-26771900Fax:
+86-755-26770801URL: http://ensupport.zte.com.cnE-mail:
[email protected]
-
LEGAL INFORMATIONCopyright 2013 ZTE CORPORATION.
The contents of this document are protected by copyright laws
and international treaties. Any reproduction or
distribution of this document or any portion of this document,
in any form by any means, without the prior written
consent of ZTE CORPORATION is prohibited. Additionally, the
contents of this document are protected by
contractual confidentiality obligations.
All company, brand and product names are trade or service marks,
or registered trade or service marks, of ZTE
CORPORATION or of their respective owners.
This document is provided as is, and all express, implied, or
statutory warranties, representations or conditions
are disclaimed, including without limitation any implied
warranty of merchantability, fitness for a particular purpose,
title or non-infringement. ZTE CORPORATION and its licensors
shall not be liable for damages resulting from the
use of or reliance on the information contained herein.
ZTE CORPORATION or its licensors may have current or pending
intellectual property rights or applications
covering the subject matter of this document. Except as
expressly provided in any written license between ZTE
CORPORATION and its licensee, the user of this document shall
not acquire any license to the subject matter
herein.
ZTE CORPORATION reserves the right to upgrade or make technical
change to this product without further notice.
Users may visit ZTE technical support website
http://ensupport.zte.com.cn to inquire related information.
The ultimate right to interpret this product resides in ZTE
CORPORATION.
Revision History
Revison No. Revision Date Revision Reason
R1.0 2012-12-21 First edition
Serial Number: SJ-20121227135800-015
Publishing Date: 2012-12-21 (R1.0)
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
ContentsAbout This Manual
.........................................................................................
I
Chapter 1
Overview....................................................................................
1-1
1.1 Introduction to BSS Radio
Parameters.................................................................
1-1
1.2 The Format to Explain Parameters
......................................................................
1-2
1.3 Precautions on Parameter
Adjustment.................................................................
1-4
Chapter 2 GSM Radio Parameters
............................................................
2-1
2.1 GSM Logical Configuration(GBssFunction)
.......................................................... 2-2
2.1.1 User Label
...............................................................................................
2-2
2.1.2 BSS ID
....................................................................................................
2-3
2.1.3 Managed Object Description
.....................................................................
2-4
2.1.4 BSC Sequence
........................................................................................
2-5
2.1.5 Load indication allowed
............................................................................
2-6
2.1.6 Load indication Valid Time
........................................................................
2-7
2.1.7 Load Indication Period
..............................................................................
2-8
2.1.8 Send assignment failure allowed in outer direct retry
procedure .................. 2-9
2.1.9 TFO Enable
...........................................................................................
2-10
2.1.10 Report voice quality
..............................................................................
2-12
2.1.11 R99
Ind................................................................................................
2-13
2.1.12 DCS1800/PCS1900
support..................................................................
2-14
2.1.13 External cell load notify
.........................................................................
2-15
2.1.14 Neighbor cell load valid
duration............................................................
2-16
2.1.15 Pre-Access Control for IP Transmission
................................................. 2-17
2.1.16 Using load information provided by CRRM
............................................. 2-17
2.1.17 Automatic Resource Indication Threshold
.............................................. 2-18
2.1.18 Access class parameter config select
.................................................... 2-20
2.1.19 First barred
class..................................................................................
2-21
2.1.20 Barred class windows
...........................................................................
2-22
2.1.21 Barred time
step...................................................................................
2-23
2.1.22 Access Control
.....................................................................................
2-24
2.1.23 Paging repeat number
..........................................................................
2-25
2.1.24 Congestion Threshold for Send Load
Indication...................................... 2-26
2.1.25 Forbid Handover According to Resource Threshold of Load
Indication ..... 2-27
2.1.26 Resource Threshold of Load Indication for Forbid Handover
................... 2-28
I
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.1.27 Force
FACCH.......................................................................................
2-29
2.1.28 Use system message method when MSC over loaded or link
blocked...... 2-30
2.1.29 Start system message method for CPU
overload.................................... 2-32
2.1.30 Start FUC flow control for CPU overload
................................................ 2-33
2.1.31 The maximum control level for MSC overload or link block
...................... 2-34
2.1.32 Start limit of system message method for CPU overload
......................... 2-35
2.1.33 Start limit of FUC flow control for CPU
overload...................................... 2-36
2.1.34 B2 support
AMR...................................................................................
2-37
2.1.35 Enable power dynamic
sharing..............................................................
2-38
2.1.36 Power congest delay
............................................................................
2-39
2.1.37 Time interval of channel power adjustment based on power
dynamic
sharing
.................................................................................................
2-40
2.1.38 If paging flow control due to high CPU
................................................... 2-41
2.1.39 CPU threshold of paging flow control
..................................................... 2-42
2.1.40 Radio pre-access procedure switch
....................................................... 2-43
2.1.41 Transport Pre-Access
Flag....................................................................
2-44
2.1.42 The switch of sending Immediate assign message and radio
channel
activating
synchronously........................................................................
2-45
2.1.43 FO report for
CS...................................................................................
2-46
2.1.44 FO report for
PS...................................................................................
2-47
2.1.45 FO report for DBS
................................................................................
2-48
2.1.46 Inter BSC handover out on SDCCH permitted
........................................ 2-48
2.1.47 The switch of connection and radio channel activating
synchronization ..... 2-50
2.1.48 Use BER to average quality
..................................................................
2-51
2.1.49 Check IMSI when
access......................................................................
2-52
2.1.50 Include BTS power in MR
.....................................................................
2-53
2.1.51 Measurement Result Recording Interval in MSC Invoke
Trace................. 2-54
2.1.52 Preprocessed Measurement Result Recording Interval in MSC
Invoke
Trace
...................................................................................................
2-55
2.1.53 Enhanced and Preprocessde MR
report................................................. 2-56
2.1.54 Preferred speech version for
FR............................................................
2-57
2.1.55 Preferred speech version for HR
...........................................................
2-58
2.1.56 Dynamic HR support
indication..............................................................
2-59
2.1.57 HR channel fragment finishing
support................................................... 2-60
2.1.58 BCCH switch allowed
...........................................................................
2-61
2.1.59 Dynamic configuration
SDCCH..............................................................
2-62
2.1.60 Scan
SDCCH.......................................................................................
2-63
2.1.61 Scan BCCH
.........................................................................................
2-64
II
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.1.62 BCCH starting delay
.............................................................................
2-65
2.1.63 BCCH finishing
delay............................................................................
2-66
2.1.64 TCH->SDCCH
limit...............................................................................
2-67
2.1.65 SDCCH->TCH
delay.............................................................................
2-68
2.1.66 Minimum Tch reserved for dynamic
SDCCH........................................... 2-69
2.1.67
Baseband frequency hopping
TRX exchange support
............................................................................................................
2-70
2.1.68 The method of intelligent TRX
poweroff.................................................. 2-72
2.1.69 IBS shutdown limit
................................................................................
2-73
2.1.70 IBS powerup limit
.................................................................................
2-73
2.1.71 IBS powerover
limit...............................................................................
2-74
2.1.72 IBS power priority
.................................................................................
2-75
2.1.73 BCCH forbidden TS merger time bitmap
................................................ 2-76
2.1.74 The master power control option of intelligent TRX
poweroff system ........ 2-77
2.1.75 Baseband resource share support
......................................................... 2-78
2.1.76 TRX Selection priority for baseband share
............................................. 2-79
2.1.77 Number of BA Ranges
.........................................................................
2-80
2.1.78 BA Range Lower
.................................................................................
2-81
2.1.79 BA Range Higher
.................................................................................
2-82
2.1.80 If get Utran classmark information from UE
............................................ 2-83
2.1.81 IPA AMR start mode
.............................................................................
2-84
2.1.82 Send OVERLOAD message to
MSC...................................................... 2-85
2.1.83 Use Load of Subcell1 as Load of Cell
.................................................... 2-86
2.1.84 Enough MS MR For Connection Failure After
Handover.......................... 2-87
2.1.85 Ts Block Alarm Switch
..........................................................................
2-88
2.1.86 BVC Block Alarm Switch
.......................................................................
2-89
2.1.87 AMR full Active Codec Set(4.75kbps)
.................................................... 2-90
2.1.88 AMR full Active Codec Set(5.15kbps)
.................................................... 2-91
2.1.89 AMR full Active Codec Set(5.9kbps)
...................................................... 2-92
2.1.90 AMR full Active Codec Set(6.7kbps)
...................................................... 2-93
2.1.91 AMR full Active Codec Set(7.4kbps)
...................................................... 2-93
2.1.92 AMR full Active Codec Set(7.95kbps)
.................................................... 2-94
2.1.93 AMR full Active Codec Set(10.2kbps)
.................................................... 2-95
2.1.94 AMR full Active Codec Set(12.2kbps)
.................................................... 2-96
2.1.95 AMR Half Active Codec
Set(4.75kbps)...................................................
2-97
III
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.1.96 AMR Half Active Codec
Set(5.15kbps)...................................................
2-98
2.1.97 AMR Half Active Codec
Set(5.9kbps).....................................................
2-99
2.1.98 AMR Half Active Codec
Set(6.7kbps)....................................................2-100
2.1.99 AMR Half Active Codec
Set(7.4kbps)....................................................2-101
2.1.100 Thresholds of AMR FR
1....................................................................2-102
2.1.101 Thresholds of AMR FR
2....................................................................2-103
2.1.102 Thresholds of AMR FR
3....................................................................2-104
2.1.103 Thresholds of AMR FR
4....................................................................2-105
2.1.104 Thresholds of AMR FR
5....................................................................2-107
2.1.105 Thresholds of AMR FR
6....................................................................2-108
2.1.106 Thresholds of AMR FR
7....................................................................2-109
2.1.107 Thresholds of AMR HR 1
...................................................................2-110
2.1.108 Thresholds of AMR HR 2
...................................................................
2-111
2.1.109 Thresholds of AMR HR 3
...................................................................2-112
2.1.110 Thresholds of AMR HR
4....................................................................2-113
2.1.111 Thresholds of AMR HR
5....................................................................2-114
2.1.112 Hysteresis of AMR FR
1.....................................................................2-115
2.1.113 Hysteresis of AMR FR
2.....................................................................2-117
2.1.114 Hysteresis of AMR FR
3.....................................................................2-118
2.1.115 Hysteresis of AMR FR
4.....................................................................2-119
2.1.116 Hysteresis of AMR FR
5.....................................................................2-120
2.1.117 Hysteresis of AMR FR
6.....................................................................2-122
2.1.118 Hysteresis of AMR FR
7.....................................................................2-123
2.1.119 Hysteresis of AMR HR
1.....................................................................2-124
2.1.120 Hysteresis of AMR HR 2
....................................................................2-125
2.1.121 Hysteresis of AMR HR 3
....................................................................2-126
2.1.122 Hysteresis of AMR HR 4
....................................................................2-128
2.1.123 Hysteresis of AMR HR 5
....................................................................2-129
2.1.124 Enable AMR FR noise
control.............................................................2-130
2.1.125 AMR FR Initial codec
mode................................................................2-131
2.1.126 AMR FR Start mode
..........................................................................2-132
2.1.127 Enable AMR HR noise control
............................................................2-133
2.1.128 AMR HR Initial codec mode
...............................................................2-134
2.1.129 AMR HR Start mode
..........................................................................2-135
2.1.130 Hysteresis of AMRWFS
1...................................................................2-136
2.1.131 Hysteresis of AMRWFS
2...................................................................2-138
2.1.132 Hysteresis of AMRWFS
3...................................................................2-139
IV
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.1.133 Hysteresis of AMRWFS
4...................................................................2-140
2.1.134 Hysteresis of AMROWFS 1
................................................................2-141
2.1.135 Hysteresis of AMROWFS 2
................................................................2-142
2.1.136 Hysteresis of AMROWHS
1................................................................2-144
2.1.137 Hysteresis of AMROWHS
2................................................................2-145
2.1.138 Thresholds for AMRWFS
1.................................................................2-146
2.1.139 Thresholds for AMRWFS
2.................................................................2-147
2.1.140 Thresholds for AMRWFS
3.................................................................2-148
2.1.141 Thresholds for AMRWFS
4.................................................................2-150
2.1.142 Thresholds for AMROWFS 1
..............................................................2-151
2.1.143 Thresholds for AMROWFS 2
..............................................................2-152
2.1.144 Thresholds for AMROWHS
1..............................................................2-153
2.1.145 Thresholds for AMROWHS
2..............................................................2-154
2.1.146 Busy threshold of sub cell
..................................................................2-155
2.1.147 Support of SON Transfer Application
..................................................2-156
2.1.148 Circuit data handover
control..............................................................2-157
2.1.149 Cell Bar when A break
.......................................................................2-158
2.1.150 VAMOS II prior to pair with non saic UE
..............................................2-159
2.1.151 Send Paging CS on CCCH or not when PS instance exists
..................2-160
2.1.152 If support mute call detect
..................................................................2-162
2.1.153 P value of MUTE SAIC MS capability detection
...................................2-163
2.1.154 N value of SAIC AFC MS capability detection
......................................2-163
2.1.155 N value of MUTE SAIC MS capability detection
...................................2-164
2.1.156 Whether using Frequency List describe channel frequency
hopping of
assignment command
..........................................................................2-165
2.1.157 P value of SAIC AFC MS capability detection
......................................2-166
2.2 BSS Function Timer(GBssFunctionTimer)
.........................................................2-167
2.2.1 BSS Function Timer ID
..........................................................................2-167
2.2.2 Protective time waiting for
access...........................................................2-168
2.2.3 Protection time for link establishment response
.......................................2-169
2.2.4 SAPI3 link establishment time
................................................................2-170
2.2.5 Protective time that responses external handover
completion
message
.............................................................................................2-171
2.2.6 External handover protective time
..........................................................2-173
2.2.7 Protective time for RF channel release
...................................................2-174
2.2.8 Starting time for oriented retry
................................................................2-175
2.2.9 Encryption mode modification time
.........................................................2-176
2.2.10 Mode modification process time
...........................................................2-177
V
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.2.11 Continue timer for mode modify
............................................................2-178
2.2.12 First overload period of flow traffic control
.............................................2-179
2.2.13 Second overload period of flow traffic
control.........................................2-180
2.2.14 Immediate assignment
period...............................................................2-181
2.2.15 Handover period of source cell
.............................................................2-182
2.2.16 Assignment
period...............................................................................2-184
2.2.17 TCH Channel release period
................................................................2-185
2.2.18 TCH Channel deactivation delay
..........................................................2-186
2.2.19 RLSD message receive protection timer
...............................................2-187
2.2.20 Channel activation protection timer
.......................................................2-188
2.2.21 MSC clear command protection timer
...................................................2-189
2.2.22 SCCP connection protection timer
........................................................2-190
2.2.23 Time of micro-micro handover delay
.....................................................2-191
2.2.24 TFI and USF release timer
...................................................................2-192
2.2.25 TBF release
timer................................................................................2-194
2.2.26 TBF protect time when radio link failure
................................................2-195
2.2.27 Bvc block/unblock retry
time.................................................................2-196
2.2.28 Bvc reset retry
time..............................................................................2-198
2.2.29 Suspend retry time
..............................................................................2-199
2.2.30 Resume retry time
...............................................................................2-200
2.2.31 Access capability update retry
time.......................................................2-202
2.2.32 PFC creating retry time
........................................................................2-203
2.2.33 PFC modifying retry
time......................................................................2-204
2.2.34 Supervision Timer of LCS
....................................................................2-205
2.2.35 Radio Timer of LCS
.............................................................................2-206
2.2.36 LCS wait intra BSS handover
timer.......................................................2-207
2.2.37 PS channel delay release timer
............................................................2-208
2.2.38 Ater wait SCCP connection
timer..........................................................2-209
2.2.39 Ater wait resource acknowledge
timer...................................................2-210
2.2.40 Ater wait resource timer
.......................................................................2-212
2.2.41 Ater wait resource release timer
...........................................................2-213
2.2.42 Ater handover monitor timer
.................................................................2-214
2.2.43 HO performed ack
timer.......................................................................2-215
2.2.44 RIR Timer
...........................................................................................2-216
2.2.45 RI
Timer..............................................................................................2-217
2.2.46 RIAE Timer
.........................................................................................2-218
2.2.47 Time to wait A handover request
..........................................................2-219
VI
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.2.48 Timer to wait a relocation commit MSG from RNC
.................................2-220
2.2.49 Timer of TRAU frame Synchronization
..................................................2-221
2.2.50 Guards the PS handover required procedure
........................................2-222
2.2.51 Guard resource release after sending PS HO command
........................2-223
2.2.52 Time of waiting an internal HO command
..............................................2-224
2.2.53 Round trip delay
..................................................................................2-225
2.2.54 IP Abis Wait Timer
...............................................................................2-227
2.2.55 synchronization timer that ensures source BSS receives
both PS and
CS
responses......................................................................................2-228
2.2.56 synchronization timer that ensures target BSS receives
both PS and
CS requests
........................................................................................2-229
2.2.57
T3197.................................................................................................2-230
2.2.58 Paging Interval
....................................................................................2-231
2.2.59 2G Load synchronized to 3G
Timer.......................................................2-232
2.2.60 2G Cell Radio Resource Synchronization Timer
....................................2-233
2.2.61 Handover protecting timer to
WCDMA/FDD...........................................2-234
2.2.62 SubCell PingPong handover timer
........................................................2-235
2.2.63 Time of Cobcch wait for MR
report........................................................2-237
2.2.64 SDCCH Channel release period
...........................................................2-238
2.2.65 SDCCH Channel deactivation delay
.....................................................2-239
2.2.66 Mute call detect
timer...........................................................................2-239
2.3 BSS Function Handover Control(GBssHandoverControl)
...................................2-240
2.3.1 BSC Handover Control ID
......................................................................2-240
2.3.2 Handover synchronization indication
support...........................................2-241
2.3.3 Internal redirection
enable......................................................................2-242
2.3.4 Outer redirection enable
........................................................................2-244
2.3.5 BSC intracell handover enable
...............................................................2-245
2.3.6 SDCCH handover
enable.......................................................................2-246
2.3.7 Handover request response
...................................................................2-246
2.3.8 Old BSS to new BSS
information............................................................2-248
2.3.9 Queuing indicator in handover required message
....................................2-249
2.3.10 A+B solution for TD handover
enabled..................................................2-250
2.3.11 Pingpong handover
duration.................................................................2-251
2.3.12 Use N/P When Select Neighbour Cell for Pbgt Handover On
Sdcch........2-252
2.3.13 Use N/P When Select Neighbour Cell for Pbgt Handover On
Tch............2-253
2.3.14 Use N/P When Select Neighbour Cell for Uplink Quality
Handover On
Sdcch..................................................................................................2-254
VII
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.3.15 Use N/P When Select Neighbour Cell for Uplink Quality
Handover On
Tch......................................................................................................2-255
2.3.16 Use N/P When Select Neighbour Cell for Downlink Quality
Handover
On Sdcch
............................................................................................2-256
2.3.17 Use N/P When Select Neighbour Cell for Downlink Quality
Handover
On Tch
................................................................................................2-257
2.3.18 Use N/P When Select Neighbour Cell for Uplink Level
Handover On
Sdcch..................................................................................................2-258
2.3.19 Use N/P When Select Neighbour Cell for Uplink Level
Handover On
Tch......................................................................................................2-259
2.3.20 Use N/P When Select Neighbour Cell for Downlink Level
Handover On
Sdcch..................................................................................................2-260
2.3.21 Use N/P When Select Neighbour Cell for Downlink Level
Handover On
Tch......................................................................................................2-261
2.3.22 BSC Internal Handover Parameter of
IPA..............................................2-262
2.3.23 Handover between cells of different net support
....................................2-263
2.3.24 the policy of choosing speech version in 3GPP IPA BSC
handover .........2-264
2.4 eMLPP
Configuration(GBssEmlpp)...................................................................2-265
2.4.1 eMLPP
ID.............................................................................................2-265
2.4.2 Queue indicate when assign
..................................................................2-266
2.4.3 Queue allowed when handover
..............................................................2-267
2.4.4 Forced handover indication for
assign.....................................................2-268
2.4.5 Forced handover indication for handover
................................................2-269
2.4.6 Forced release indicate when assign
......................................................2-270
2.4.7 Forced release allowed when handover
..................................................2-272
2.4.8 Wait resource timer after forced handover (ForceHoWait,
100ms) ............2-273
2.4.9 Wait resource timer after forced
release..................................................2-274
2.4.10 Enough low priority for
preemption........................................................2-275
2.4.11 Enough call duration for
preemption......................................................2-276
2.4.12 Forced handover target penalty
time.....................................................2-277
2.4.13 Priority of emergency service
...............................................................2-278
2.4.14 User priority threshold for
EMLPP.........................................................2-279
2.4.15 Reserved channel first
.........................................................................2-280
2.4.16 Support EMLPP(SupportEMLPP)
.........................................................2-281
2.4.17 EMLPP channel reserved
rate..............................................................2-282
2.5 eMLPP User Priority
Configuration(GEmlppUserPriority)....................................2-283
2.5.1 eMLPP User Priority Configuration ID
.....................................................2-283
2.5.2 User priority
..........................................................................................2-284
2.5.3 Strategy for preemption when
assign......................................................2-285
VIII
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.5.4 Strategy for preemption when
handover..................................................2-286
2.5.5 Max forced handover times when assign
................................................2-288
2.5.6 Max forced handover times when handover
............................................2-289
2.5.7 Max forced release times when assign
...................................................2-290
2.5.8 Max forced release times when handover
...............................................2-291
2.5.9 Preemption duration when
assign...........................................................2-292
2.5.10 Preemption duration when
handover.....................................................2-293
2.5.11 Timer for start forced release when assign
............................................2-294
2.5.12 Timer for start forced release when handover
........................................2-295
2.5.13 Interval for search forced handover target when
assign..........................2-296
2.5.14 Interval for search forced handover target when handover
.....................2-298
2.5.15 Interval for search forced release target when
assign.............................2-299
2.5.16 Interval for search forced release target when handover
........................2-300
2.5.17 Queue timer for
assign.........................................................................2-301
2.5.18 Queue timer for handover
....................................................................2-302
2.6 BSS Function
PS(GBssFunctionPS).................................................................2-303
2.6.1 BSC PS
ID............................................................................................2-303
2.6.2 Bvc flow control
period...........................................................................2-304
2.6.3 MS flow control period
...........................................................................2-305
2.6.4 Max times of radio access capabilities update retry
.................................2-306
2.6.5 Max times of PFC create
retry................................................................2-308
2.6.6 Max times of PFC modify retry
...............................................................2-309
2.6.7 Max times of Bvc block retry
..................................................................2-310
2.6.8 Max times of Bvc unblock
retry...............................................................2-311
2.6.9 MAX times of Bvc reset retry
..................................................................2-312
2.6.10 Max times of suspend retry
..................................................................2-314
2.6.11 Max times of resume retry
....................................................................2-315
2.6.12 Max allowed number of continous losses of uplink data
blocks(N3101)
.....................................................................................2-316
2.6.13 Times of packet uplink ACK/NACK retries(N3103)
.................................2-317
2.6.14 Max allowed number of continuous losses of uplink RLC/MAC
control
message(N3105)
.................................................................................2-319
2.6.15 Bvc flow control support
.......................................................................2-320
2.6.16 MS flow control support
.......................................................................2-321
2.6.17 Bvc flow control R MIN
value................................................................2-322
2.6.18 MS flow control R MIN value
................................................................2-324
2.6.19 Flow control mode
...............................................................................2-325
2.6.20 PFC
support........................................................................................2-326
IX
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.6.21 Net operation mode
.............................................................................2-327
2.6.22 Page coordination support
...................................................................2-328
2.6.23 NACC
support.....................................................................................2-330
2.6.24 LLC Transfer for SAPI0(Reserved)
.......................................................2-331
2.6.25 LLC Transfer for
SAPI1(LLGMM)..........................................................2-332
2.6.26 LLC Transfer for SAPI2(TOM2)
............................................................2-333
2.6.27 LLC Transfer for SAPI3(User-Data)
......................................................2-334
2.6.28 LLC Transfer for SAPI4(Reserved)
.......................................................2-336
2.6.29 LLC Transfer for SAPI5(User-Data)
......................................................2-337
2.6.30 LLC Transfer for SAPI6(Reserved)
.......................................................2-338
2.6.31 LLC Transfer for
SAPI7(LLSMS)...........................................................2-339
2.6.32 LLC Transfer for SAPI8(TOM8)
............................................................2-340
2.6.33 LLC Transfer for SAPI9(User-Data)
......................................................2-341
2.6.34 LLC Transfer for SAPI10(Reserved)
.....................................................2-343
2.6.35 LLC Transfer for
SAPI11(User-Data).....................................................2-344
2.6.36 LLC Transfer for SAPI12(Reserved)
.....................................................2-345
2.6.37 LLC Transfer for SAPI13(Reserved)
.....................................................2-346
2.6.38 LLC Transfer for SAPI14(Reserved)
.....................................................2-347
2.6.39 LLC Transfer for SAPI15(Reserved)
.....................................................2-348
2.6.40 RIM support
........................................................................................2-350
2.6.41 RIM retry
times....................................................................................2-351
2.6.42 TBF establish support
..........................................................................2-352
2.6.43 Signal extended uplink TBF support
.....................................................2-353
2.6.44 Highest coding scheme of POC service in GPRS
..................................2-354
2.6.45 Highest coding scheme of POC service in EGPRS
................................2-355
2.6.46 Highest coding scheme of signal TBF
...................................................2-356
2.6.47 Support of enhanced radio status
procedures........................................2-358
2.6.48 Support of PFC flow control procedures
................................................2-359
2.6.49 PS handover support
...........................................................................2-360
2.6.50 Max of sending PS handover required
..................................................2-361
2.6.51
Enable PS Handover Indications in Inter-BSS
handover
...........................................................................................................2-362
2.6.52 Request SI/PSI
...................................................................................2-363
2.6.53 Service UTRAN CCO support
..............................................................2-364
2.6.54 FANR in TBF
support...........................................................................2-365
X
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.6.55 DLDC support
.....................................................................................2-366
2.6.56 RTTI support
.......................................................................................2-367
2.6.57 EGPRS2-A support
.............................................................................2-369
2.6.58 EGPRS prior to GPRS Support
............................................................2-370
2.6.59 Allocating weights of EGPRS
...............................................................2-371
2.6.60 Choose PS route by NSVC
..................................................................2-372
2.6.61 Enable PS Uplink Power Control In Establishment Phase
......................2-373
2.6.62 DTM Enhance Capability
.....................................................................2-374
2.6.63 Enable PCU resource
alarm.................................................................2-375
2.6.64 E-UTRAN CCN support
.......................................................................2-376
2.6.65 DTM Handover Support
.......................................................................2-377
2.6.66 Continue with CS HO While PS HO is failure in DTM HO
.......................2-378
2.6.67 Send suspend message when GPRS suspension
.................................2-379
2.6.68 Send by SNDCP indicator
....................................................................2-380
2.6.69 TCP/IP performance enhance
..............................................................2-381
2.6.70 IP Segment Optimization
.....................................................................2-382
2.6.71 Support resource optimizing by
service.................................................2-383
2.6.72 Identify of special service
.....................................................................2-384
2.6.73 Extended uplink dynamic allocation support
..........................................2-385
2.6.74 Resource pool for PS rate
....................................................................2-386
2.6.75 Max users of POC service on shared PS channel uplink
........................2-387
2.6.76 Max users of POC service on shared PS channel downlink
....................2-388
2.6.77 Optimized POC service
support............................................................2-389
2.6.78 IP abis pool bandwidth restore support
.................................................2-390
2.6.79 Max LLC num that per bssgp may save
................................................2-391
2.6.80 Max LLC num that per bssgp may transfer
............................................2-393
2.6.81 RRM threshold
....................................................................................2-394
2.6.82 Parameter of Flow control mode 1
........................................................2-395
2.6.83 Parameter of Flow control mode 2
........................................................2-396
2.6.84 Coefficient of Bvc bucket
size...............................................................2-397
2.6.85 Coefficient of MS bucket
......................................................................2-398
2.6.86 Enable implicit reject with paging
..........................................................2-399
2.6.87 Implicit reject CS and PS with
paging....................................................2-400
2.6.88 PS service Bar when Gb
break.............................................................2-401
2.7 Common Measure and Information Exchange(GCommMeas)
............................2-402
2.7.1 Common Measure and Information Exchange
ID.....................................2-402
2.7.2 Report characteristics
............................................................................2-403
XI
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.7.3 Measurement Load Threshold
1.............................................................2-404
2.7.4 Measurement RT Load Threshold
1........................................................2-405
2.7.5 Measurement NRT Load Threshold 1
.....................................................2-406
2.7.6 Measurement Load Threshold
2.............................................................2-407
2.7.7 Measurement RT Load Threshold
2........................................................2-408
2.7.8 Measurement NRT Load Threshold 2
.....................................................2-409
2.7.9 Report periodicity unit
............................................................................2-410
2.7.10 Report Periodicity
Value.......................................................................2-411
2.7.11 Measurement Hysteresis Time
.............................................................2-412
2.7.12 Event Report
Periodicity.......................................................................2-413
2.7.13 Information Report
Type.......................................................................2-414
2.7.14 Measurement
type...............................................................................2-415
2.7.15 Support of 2g request Iur-g
..................................................................2-416
2.7.16 Not Real Time Load Overflow Threshold
...............................................2-417
2.7.17 Not Real Time Load High Threshold
.....................................................2-418
2.7.18 Not Real Time Load Low Threshold
......................................................2-419
2.8 BSC Precise Paging Configuration(GBssPrecisePaging)
...................................2-421
2.8.1 BSC Precise Paging Configuration
ID.....................................................2-421
2.8.2 Support Precise Paging
.........................................................................2-422
2.8.3 Use HPC for Precise Paging
..................................................................2-423
2.8.4 Adopt Precise Paging for repaging of Circuit Switched
Service ................2-424
2.8.5 Adopt Precise Paging for repaging of Packet Switched
Service ................2-425
2.8.6 Allow Exceed area Precise Paging for Circuit Switched
Service ...............2-426
2.8.7 Allow Exceed area Precise Paging for Packet Switched
Service...............2-427
2.8.8 Paging Repeat Time for Circuit Switched Service
....................................2-428
2.8.9 Paging Repeat Time for Packet Switched Service
...................................2-429
2.9 BSC Reserved Configuration(GBssFunctionRsv)
..............................................2-430
2.9.1 BSC Reserved Configuration ID
.............................................................2-430
2.9.2 Global Reserved Parameter 1
................................................................2-431
2.9.3 Global Reserved Parameter 2
................................................................2-432
2.9.4 Global Reserved Parameter 3
................................................................2-432
2.9.5 Global Reserved Parameter 4
................................................................2-433
2.9.6 Global Reserved Parameter 5
................................................................2-434
2.9.7 Global Reserved Parameter 6
................................................................2-435
2.9.8 Global Reserved Parameter 7
................................................................2-436
2.9.9 Global Reserved Parameter 8
................................................................2-437
2.9.10 Global Reserved Parameter 9
..............................................................2-438
XII
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.9.11 Global Reserved Parameter
10.............................................................2-439
2.9.12 Global Reserved Parameter
11.............................................................2-440
2.9.13 Global Reserved Parameter 12
............................................................2-440
2.9.14 Global Reserved Parameter 13
............................................................2-441
2.9.15 Global Reserved Parameter 14
............................................................2-442
2.9.16 Global Reserved Parameter 15
............................................................2-443
2.9.17 Global Reserved Parameter 16
............................................................2-444
2.9.18 Global Reserved Parameter 17
............................................................2-445
2.9.19 Global Reserved Parameter 18
............................................................2-446
2.9.20 Global Reserved Parameter 19
............................................................2-447
2.9.21 Global Reserved Parameter 20
............................................................2-448
2.10 External GSM Cell Configuration(GExternalGsmCell)
......................................2-449
2.10.1 External GSM Cell
ID...........................................................................2-449
2.10.2 Cell Identity
.........................................................................................2-450
2.10.3 BCCH arfcn
........................................................................................2-450
2.10.4 NCC
...................................................................................................2-451
2.10.5 BCC
...................................................................................................2-452
2.10.6 LAC (LAC)
..........................................................................................2-453
2.10.7
MCC...................................................................................................2-454
2.10.8
MNC...................................................................................................2-455
2.10.9
FreqBand............................................................................................2-456
2.10.10 Cell type
...........................................................................................2-457
2.10.11 GPRS service
support........................................................................2-458
2.10.12 Allow SOLSA MS to access
...............................................................2-459
2.10.13 LSA
ID..............................................................................................2-460
2.10.14 RAC (RAC)
.......................................................................................2-461
2.10.15 Cell bar access
2...............................................................................2-463
2.10.16 GPRS access minimal signal level in idle
............................................2-465
2.10.17 GPRS MAX initial access signal level in idle
........................................2-466
2.10.18 Cell reselection offset in idle
...............................................................2-467
2.10.19 Cell reselection temporary offset in idle
...............................................2-469
2.10.20 Penalty time of cell reselection in
idle..................................................2-470
2.10.21 HSC exist in idle
................................................................................2-471
2.10.22 Threshold of HSC signal level in idle
...................................................2-472
2.10.23 HCS priority in
idle.............................................................................2-473
2.10.24 GPRS access minimal signal level in transfer
......................................2-474
2.10.25 GPRS MAX initial access signal level in
transfer..................................2-476
XIII
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.10.26 Cell reselection offset in transfer
.........................................................2-477
2.10.27 Cell reselection temporary offset in transfer
.........................................2-478
2.10.28 Penalty time of cell reselection in
transfer............................................2-480
2.10.29 HSC exist in transfer
..........................................................................2-481
2.10.30 Threshold of HSC signal level in
transfer.............................................2-482
2.10.31 HCS priority in
transfer.......................................................................2-483
2.10.32 MAX power level of
MS......................................................................2-484
2.10.33 RemoteSp
DN...................................................................................2-486
2.10.34 Um soft Synchronous Support
............................................................2-486
2.11 External UTRAN FDD Cell
Configuration(GExternalUtranCellFDD) ...................2-487
2.11.1 External UTRAN FDD Cell ID
...............................................................2-487
2.11.2 CI
.......................................................................................................2-488
2.11.3
MCC...................................................................................................2-489
2.11.4
MNC...................................................................................................2-490
2.11.5 RNC ID
...............................................................................................2-491
2.11.6 LAC (LAC)
..........................................................................................2-492
2.11.7 UTRAN cell
frequency..........................................................................2-493
2.11.8 Scrambling
code..................................................................................2-494
2.11.9 TX diversity indication
..........................................................................2-495
2.11.10 RAC (RAC)
.......................................................................................2-496
2.11.11 Whether an external 3G cell is included in GSM system.
......................2-497
2.12 External UTRAN TDD Cell
Configuration(GExternalUtranCellTDDLcr) ..............2-498
2.12.1 External UTRAN TDD Cell ID
...............................................................2-498
2.12.2 CI
.......................................................................................................2-499
2.12.3
MCC...................................................................................................2-500
2.12.4
MNC...................................................................................................2-501
2.12.5 RNC
ID...............................................................................................2-502
2.12.6 LAC (LAC)
..........................................................................................2-503
2.12.7 UTRAN cell frequency
.........................................................................2-504
2.12.8 UTRAN TDD cell parameter
.................................................................2-505
2.12.9 TX diversity
indication..........................................................................2-506
2.12.10 RAC (RAC)
.......................................................................................2-506
2.12.11 UTRAN adjacent cell
bandwidth..........................................................2-508
2.12.12 Apply Sync Case / Apply TSTD
..........................................................2-509
2.12.13
Whether an external 3G cell is included in
GSM system.
XIV
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
...........................................................................................................2-510
2.13 External E-UTRAN FDD Cell
Configuration(GExternalEutranCellFDD)..............2-511
2.13.1 External E-UTRAN FDD Cell Configuration
ID.......................................2-511
2.13.2
MCC...................................................................................................2-512
2.13.3
MNC...................................................................................................2-512
2.13.4 EUTRAN NODEB Identification
............................................................2-513
2.13.5 Physical layer cell identity of LTE
CELL.................................................2-514
2.13.6 specified EARFCN of E-UTRAN cells
...................................................2-515
2.13.7 Tracking area
code..............................................................................2-516
2.13.8 The attribute of LTE
NodeB..................................................................2-517
2.13.9 the minimum value of the channel bandwidth
........................................2-518
2.13.10 EUTRAN CELL
Identification..............................................................2-519
2.14 External UTRAN FDD Cell CRRM
Configuration(GCrrmNCellLdFDD)...............2-520
2.14.1 External UTRAN FDD Cell CRRM ID
....................................................2-520
2.14.2 Cs Remained User Num Low Threshold
...............................................2-521
2.14.3 Ps Remained User Num Low
Threshold................................................2-522
2.14.4 Cs Remained User Num Medium
Threshold..........................................2-523
2.14.5 Ps Remained User Num Medium
Threshold..........................................2-524
2.14.6 Uplink Load Low Threshold
..................................................................2-525
2.14.7 Uplink Load Medium Threshold
............................................................2-526
2.14.8 Uplink Load High Threshold
.................................................................2-527
2.14.9 Downlink Load Low
Threshold..............................................................2-528
2.14.10 Downlink Load Medium Threshold
......................................................2-529
2.14.11 Downlink Load High Threshold
...........................................................2-530
2.14.12 Real Time Uplink Load Low Threshold
................................................2-531
2.14.13 Real Time Uplink Load Medium Threshold
..........................................2-532
2.14.14 Real Time Uplink Load High Threshold
...............................................2-533
2.14.15 Real Time Downlink Load Low
Threshold............................................2-534
2.14.16 Real Time Downlink Load Medium Threshold
......................................2-535
2.14.17 Real Time Downlink Load High Threshold
...........................................2-536
2.14.18 Not Real Time Uplink Load Low Threshold
..........................................2-537
2.14.19 Not Real Time Uplink Load Medium Threshold
....................................2-538
2.14.20 Not Real Time Uplink Load High Threshold
.........................................2-539
2.14.21 Not Real Time Downlink Load Low
Threshold......................................2-540
2.14.22 Not Real Time Downlink Load Medium Threshold
................................2-541
2.14.23 Not Real Time Downlink Load High Threshold
.....................................2-542
2.15 External UTRAN TDD Cell CRRM
Configuration(GCrrmNCellLdTDDLcr) ..........2-543
XV
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.15.1 External UTRAN TDD Cell CRRM ID
....................................................2-543
2.15.2 Cs Remained User Num Low Threshold
...............................................2-544
2.15.3 Ps Remained User Num Low
Threshold................................................2-545
2.15.4 Cs Remained User Num Medium
Threshold..........................................2-546
2.15.5 Ps Remained User Num Medium
Threshold..........................................2-547
2.15.6 Uplink Load Low Threshold
..................................................................2-548
2.15.7 Uplink Load Medium Threshold
............................................................2-549
2.15.8 Uplink Load High Threshold
.................................................................2-550
2.15.9 Downlink Load Low
Threshold..............................................................2-551
2.15.10 Downlink Load Medium Threshold
......................................................2-552
2.15.11 Downlink Load High Threshold
...........................................................2-553
2.15.12 Real Time Uplink Load Low Threshold
................................................2-554
2.15.13 Real Time Uplink Load Medium Threshold
..........................................2-555
2.15.14 Real Time Uplink Load High Threshold
...............................................2-556
2.15.15 Real Time Downlink Load Low
Threshold............................................2-557
2.15.16 Real Time Downlink Load Medium Threshold
......................................2-558
2.15.17 Real Time Downlink Load High Threshold
...........................................2-559
2.15.18 Not Real Time Uplink Load Low Threshold
..........................................2-560
2.15.19 Not Real Time Uplink Load Medium Threshold
....................................2-561
2.15.20 Not Real Time Uplink Load High Threshold
.........................................2-562
2.15.21 Not Real Time Downlink Load Low
Threshold......................................2-563
2.15.22 Not Real Time Downlink Load Medium Threshold
................................2-564
2.15.23 Not Real Time Downlink Load High Threshold
.....................................2-565
2.16 External E-UTRAN TDD Cell
Configuration(GExternalEutranCellTDD)..............2-566
2.16.1 External E-UTRAN TDD Cell Configuration
ID.......................................2-566
2.16.2
MCC...................................................................................................2-567
2.16.3
MNC...................................................................................................2-568
2.16.4 EUTRAN NODEB Identification
............................................................2-569
2.16.5 Physical layer cell identity of LTE
CELL.................................................2-570
2.16.6 specified EARFCN of E-UTRAN cells
...................................................2-571
2.16.7 Tracking area
code..............................................................................2-572
2.16.8 The attribute of LTE
NodeB..................................................................2-573
2.16.9 the minimum value of the channel bandwidth
........................................2-574
2.16.10 EUTRAN CELL
Identification..............................................................2-575
2.17 GSM Cell
Configuration(GGsmCell)................................................................2-576
2.17.1 GSM Cell Configuration ID
...................................................................2-576
2.17.2 CI
.......................................................................................................2-577
XVI
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.17.3 NCC
...................................................................................................2-577
2.17.4 BCC
...................................................................................................2-578
2.17.5
TSC....................................................................................................2-580
2.17.6 MIN received signal level to access
......................................................2-581
2.17.7 Control channel MAX power level
.........................................................2-582
2.17.8 NCC permitted
....................................................................................2-584
2.17.9 GPLMN
DN.........................................................................................2-585
2.17.10 LocationArea DN
...............................................................................2-586
2.17.11 Cell Sequence
...................................................................................2-587
2.17.12 BCCH
arfcn.......................................................................................2-588
2.17.13 Common control channel configuration
...............................................2-588
2.17.14 PS Support
.......................................................................................2-590
2.17.15 GRoutingArea
DN..............................................................................2-591
2.17.16 Number of blocks reserved for AGCH
.................................................2-592
2.17.17 Number of multi-frames of the PCH
....................................................2-593
2.17.18 Early class-mark sending control
........................................................2-595
2.17.19 CBC support
.....................................................................................2-596
2.17.20
FreqBand..........................................................................................2-597
2.17.21 Cell type
...........................................................................................2-598
2.17.22 MAX number of re-transmitting events times
.......................................2-599
2.17.23 Number of slots to spread
transmission...............................................2-601
2.17.24 Cell bar qualify
..................................................................................2-602
2.17.25 Cell bar
access..................................................................................2-604
2.17.26 Call re-establishment
allowed.............................................................2-605
2.17.27 Emergency call allowed
.....................................................................2-606
2.17.28 Access Control
..................................................................................2-607
2.17.29 Uplink discontinuous transmission
......................................................2-608
2.17.30 Protection period for access attempt
...................................................2-610
2.17.31 Multi-band report indication
................................................................2-611
2.17.32 Redirection
enable.............................................................................2-613
2.17.33 Outer redirection
enable.....................................................................2-614
2.17.34 Downlink discontinuous transmission
allowed......................................2-615
2.17.35 SI13 sending
position.........................................................................2-616
2.17.36 Queue allowed when
assign...............................................................2-617
2.17.37 Forced release indicate when assign
..................................................2-619
2.17.38 Forced handover indication for
assign.................................................2-620
2.17.39 Queue allowed when handover
..........................................................2-621
XVII
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.17.40 Forced release indicate when handover
..............................................2-622
2.17.41 Forced handover indication for
handover.............................................2-623
2.17.42 Cipher mode priority
1........................................................................2-625
2.17.43 Cipher mode priority
2........................................................................2-626
2.17.44 Cipher mode priority
3........................................................................2-627
2.17.45 Cipher mode priority
4........................................................................2-628
2.17.46 Cipher mode priority
5........................................................................2-629
2.17.47 Cipher mode priority
6........................................................................2-631
2.17.48 Cipher mode priority
7........................................................................2-632
2.17.49 Preprocessing indication
....................................................................2-633
2.17.50 Fast average indication
......................................................................2-635
2.17.51 Allowed FACCH call setup after emergency
call...................................2-636
2.17.52 Allowed FACCH call setup when page respond
...................................2-637
2.17.53 Allowed call setup on
FACCH.............................................................2-638
2.17.54 Allowed call reestablished on FACCH
.................................................2-639
2.17.55 Minimal resource threshold
................................................................2-640
2.17.56 PCH load indication period
.................................................................2-641
2.17.57 CCCH load indication (RACH)
............................................................2-642
2.17.58 CCCH load indication (PCH)
..............................................................2-643
2.17.59 Interference average period
...............................................................2-644
2.17.60 Interference Band
Boundary...............................................................2-645
2.17.61 MAX resending times for physical
information......................................2-646
2.17.62 RACH load indication
period...............................................................2-647
2.17.63 Average bursts count surveyed by
RACH............................................2-648
2.17.64 RACH receiving signal level threshold for busy
burst............................2-649
2.17.65 Times of N200 for SDCCH
.................................................................2-650
2.17.66 Times of N200 for
FACCH_F..............................................................2-651
2.17.67 Times of N200 for
FACCH_H..............................................................2-652
2.17.68 Times of N200 for SACCH
.................................................................2-653
2.17.69 Times of N200 for establish
................................................................2-654
2.17.70 Times of N200 for
Release.................................................................2-655
2.17.71 Interval of SDCCH re-sending PHY info
message................................2-656
2.17.72 Interval of TCH re-sending PHY info
message.....................................2-657
2.17.73 TA Max
.............................................................................................2-659
2.17.74 TA allowed
........................................................................................2-660
2.17.75 Allow SOLSA MS to access
...............................................................2-661
2.17.76 Repeated ACCH
support....................................................................2-662
XVIII
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.17.77 Frequency offset correct support
........................................................2-663
2.17.78 Maximum power on handover command support
.................................2-664
2.17.79 Coefficient of Bvc bucket size
.............................................................2-665
2.17.80 TA MIN
.............................................................................................2-666
2.17.81 8PSK modulating power attenuation level
...........................................2-667
2.17.82 Access class parameter config
select..................................................2-668
2.17.83 Cell access control support
................................................................2-669
2.17.84 Support NCell of Channel Release
.....................................................2-670
2.17.85 Strategy for E-Utran Neighbour Select When Release
.........................2-671
2.17.86 E-Utran FDD and TDD Prio When Release
.........................................2-672
2.17.87 Support Emergency call preemption
...................................................2-673
2.17.88 BA show
...........................................................................................2-675
2.17.89 Support CS paging prefer PS Assignment
...........................................2-676
2.17.90 Channel Select Strategy
....................................................................2-677
2.17.91 EMLPP channel reserved rate
............................................................2-678
2.17.92 Use cell EMLPP
Threshold.................................................................2-679
2.17.93 Dynamic HR support
indication...........................................................2-680
2.17.94 Threshold of AMR
HR........................................................................2-681
2.17.95 Threshold for FR to
HR......................................................................2-682
2.17.96 Dynamic HR channel allocation algorithm
...........................................2-683
2.17.97 HR channel fragment finishing
support................................................2-685
2.17.98 Busy threshold for HR defrag
.............................................................2-686
2.17.99 Idle FR threshold For HR defrag
.........................................................2-687
2.17.100 HR channel percentage threshold
.....................................................2-688
2.17.101 If support allocating channel by
TA....................................................2-689
2.17.102 The TA threshold of allocating channel in BCCH
................................2-690
2.17.103 Support dynamic channel
move........................................................2-691
2.17.104 Idle static TCH threshold for dynamic channel move
..........................2-692
2.17.105 UpLink Optimize Method for Assignment or Intracell
Handover ...........2-693
2.17.106 DownLink Optimize Method for Assignment or Intracell
Handover.......2-694
2.17.107 UpLink Optimize Method for Intercell Handover
.................................2-695
2.17.108 DownLink Optimize Method for Intercell Handover
.............................2-696
2.17.109 UpLink Optimize Method for Immediate Assignment
..........................2-697
2.17.110 DownLink Optimize Method for Immediate Assignment
......................2-698
2.17.111 Uplink target
level.............................................................................2-699
2.17.112 Downlink target level
........................................................................2-700
2.17.113 Low RSSI threshold
.........................................................................2-701
XIX
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.17.114 High RSSI Threshold
.......................................................................2-703
2.17.115 Ms power inherit
threshold................................................................2-704
2.17.116 Additional reselection parameter
indication(SI4).................................2-705
2.17.117 Cell reselection parameter indication
.................................................2-706
2.17.118 Cell reselection offset
.......................................................................2-708
2.17.119 Temporary offset
..............................................................................2-709
2.17.120 Penalty time
....................................................................................2-711
2.17.121 Cell reselecting hysteresis level
........................................................2-712
2.17.122 New setup cause indication
..............................................................2-713
2.17.123 Power offset indication
.....................................................................2-714
2.17.124 Power offset
....................................................................................2-716
2.17.125 Priority
threshold..............................................................................2-717
2.17.126 LSA Offset
......................................................................................2-718
2.17.127 Additional reselection parameter indicator(SI3)
..................................2-718
2.17.128 MAX value of MS Radio link timeout
.................................................2-720
2.17.129 Radio link failure criterion
.................................................................2-721
2.17.130 MAX value of BSS Radio link
timeout................................................2-722
2.17.131 Receiving level
threshold..................................................................2-724
2.17.132 Receiving quality
threshold...............................................................2-725
2.17.133 Radio link failure checking
period......................................................2-726
2.17.134 BCCH switch
allowed.......................................................................2-727
2.17.135 Dynamic configuration
SDCCH.........................................................2-728
2.17.136 Baseband frequency hopping TRX exchange support
........................2-729
2.17.137 Start PA power
off............................................................................2-730
2.17.138 Switch flag of cell TRX power
off.......................................................2-731
2.17.139 Start PA output voltage
tuning...........................................................2-732
2.17.140 Enable RRU of cell power off
............................................................2-733
2.17.141 The switch of CIR
report...................................................................2-734
2.17.142 The L2 frame of Lapdm fill random
value...........................................2-735
2.17.143 MR Report Time Bmp
......................................................................2-736
2.17.144 Support intelligent cell shutting down
................................................2-737
2.17.145 Upper GGsmCell DN
.......................................................................2-738
2.17.146 Mobile Originated Short Message Intercept
.......................................2-739
2.17.147 Mobile Terminated Short Message Intercept
......................................2-740
2.17.148 Diversity Combine Mode
..................................................................2-741
2.17.149 Joint Source-Controlled Channel Decoding
Switch.............................2-742
2.17.150 Joint Source-Controlled Channel Decoding
.......................................2-743
XX
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.17.151 IBS time bitmap
...............................................................................2-744
2.17.152 Cell shuttingdown based on traffic load
.............................................2-745
2.17.153 Support implicit reject in assignment
.................................................2-746
2.17.154 Implicit reject CS and
PS..................................................................2-747
2.17.155 Support broadcasting EAB
...............................................................2-748
2.17.156 EAB Subcategory
............................................................................2-749
2.17.157 EAB Authorization
Mask...................................................................2-750
2.17.158 EAB Position
...................................................................................2-751
2.17.159 NCC Config Parameter
....................................................................2-752
2.17.160 RxQual
Threshlod............................................................................2-753
2.17.161 TCH Allocation Threshold For Dual-Frequency
Network.....................2-754
2.17.162 Um soft Synchronous Support
..........................................................2-755
2.17.163 Is Enhanced Dual-Frequency Network
Support..................................2-756
2.17.164 SubCell Channel Allocation
Control...................................................2-757
2.17.165 Use Uniform Power Control
.............................................................2-758
2.17.166 Longitude
........................................................................................2-759
2.17.167
Latitude...........................................................................................2-760
2.17.168 Altitude
...........................................................................................2-761
2.17.169 Offset Angle
....................................................................................2-762
2.17.170 Site location
....................................................................................2-763
2.17.171 Immediate assignment maximum delay times
...................................2-764
2.17.172 Filter Exceed Traffic threshold NCell
.................................................2-765
2.17.173 Emergency Handover use Dynamic
Priority.......................................2-765
2.17.174 Assign strategy for
Cobcch...............................................................2-766
2.17.175 Arf power reduce function switch
......................................................2-768
2.17.176 SupportBtsBcchExchg
.....................................................................2-769
2.17.177 Stop power Reduce Level
Threshold.................................................2-770
2.17.178 Reduce Power Step
.........................................................................2-771
2.17.179 Reduce Power Arfcn
........................................................................2-771
2.17.180 Prom power step
.............................................................................2-772
2.17.181 Non Emergency Handover use Dynamic
Priority................................2-773
2.17.182 Immediate assignment occupy PCH
option........................................2-774
2.18 Cell Precise Paging Configuration(GCellPrecisePaging)
..................................2-775
2.18.1 Cell Precise Paging Configuration ID
....................................................2-775
2.18.2 Adopt Precise Paging for Circuit Switched
Service.................................2-776
2.18.3 Adopt Precise Paging for Packet Switched
Service................................2-777
2.18.4 VPC Age Time
....................................................................................2-778
XXI
SJ-20121227135800-015|2012-12-21 (R1.0) ZTE Proprietary and
Confidential
-
2.18.5 Paging Hole
Timer...............................................................................2-779
2.19 Location Area(GLocationArea)
.......................................................................2-780
2.19.1 Location Area ID
.................................................................................2-780
2.19.2
LAC....................................................................................................2-781
2.19.3 IMSI attach/detach allowed
..................................................................2-782
2.19.4 Periodical location updating timer
.........................................................2-783
2.20 Routing Area(GRoutingArea)
.........................................................................2-785
2.20.1 Routing Area
ID...................................................................................2-785
2.20.2 RAC
...................................................................................................2-785
2.21 AMR Configuration(GCellAmr)
.......................................................................2-787
2.21.1 AMR Configuration
ID..........................................................................2-787
2.21.2 Support AMR
Codec............................................................................2-788
2.21.3 Use cell AMR parameter
......................................................................2-788
2.21.4 AMR full Active Codec Set(4.75kbps)
...................................................2-789
2.21.5 AMR full Active Codec Set(5.15kbps)
...................................................2-790
2.21.6 AMR full Active Codec Set(5.9kbps)
.....................................................2-791
2.21.7 AMR full Active Codec Set(6.7kbps)
.....................................................2-792
2.21.8 AMR full Active Codec Set(7.4kbps)
.....................................................2-793
2.21.9 AMR full Active Codec Set(7.95kbps)
...................................................2-794
2.21.10 AMR full Active Codec Set(10.2kbps).........