Since 1960 we have produced your hot water VERTICAL ELECTRIC WALL HANG WATER HEATERS ENERGY SAVING Pages 3 - 8 ELECTRIC WATER HEATERS Pages 9 - 25 WOOD WATER HEATERS Pages 26 - 29 MULTIGAS WATER HEATERS Pages 30 - 48 HEAT PUMP WATER HEATERS AND TREATMENT UNITS Pages 49 - 63 BOILERS WITH DOUBLE WALLED EXCHANGER Pages 64 - 66 BOILERS WITH WELDED COIL Pages 67 - 82 TANKS Pages 83 - 89 Catalogue 01/2016
92
Embed
Since 1960 we have produced your hot water · Since 1960 we have produced your hot water BSETRONIC VERTICAL ELECTRIC WALL HANG WATER HEATER ENERGY SAVING This electric water heater,
This document is posted to help you gain knowledge. Please leave a comment to let me know what you think about it! Share it to your friends and learn new things together.
Transcript
Since 1960 we have produced your hot water
VERTICAL ELECTRIC WALL HANG WATER HEATERS ENERGY SAVING
Pages 3 - 8
ELECTRIC WATER HEATERS
Pages 9 - 25
WOOD WATER HEATERS
Pages 26 - 29
MULTIGAS WATER HEATERS
Pages 30 - 48
HEAT PUMP WATER HEATERS AND TREATMENT UNITS
Pages 49 - 63
BOILERS WITH DOUBLE WALLED
EXCHANGER
Pages 64 - 66
BOILERS WITH WELDED COIL
Pages 67 - 82
TANKS
Pages 83 - 89
Catalogue 01/2016
Page 1
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Founded in 1960, Boschetti Industrie Meccaniche is a prime exponent of Italy’s finest traditions of technical excellence in the heating and hot water sector. The continuous efforts of the firm in use of the most advanced technologies and in the constant search of a careful production for the environement and energy saving, allowed to Boschetti to produce a wide range of products according to the European standard. The company was founded and grew in the hardworking area of north-east Italy, thanks to the passion and resourcefulness of a family that has been able to conquer a place of honour as one of the most appreciated brands in its sector, and Boschetti is proud to offer all the values of production quality, technological brilliance and Italian style associated with its name.
Evolution
Advanced technical skills, experience, operative flexibility and a passion for innovation are the cornerstones of Boschetti’s long and highly successful presence on the Italian and international heating and hot water market, coupled with an intense interest in the themes of sustainable energy and environmental protection. Every products processing cycle is executed inside the factory. It allows to verify the quality of the materials and components and check every steps of production. All items are tested by qualified staff. Boschetti is able to produce new models for the most different requests.
Design and production
Boschetti Industrie Meccaniche collaborates with important corporate of certification for technical advice. All products are guaranteed in compliance with applicable standards and CE certification requirements.
Certification and approval
The company’s versatile range of products, which includes gas, electric and wood-fired storage heaters and boilers for both domestic and industrial use, guaranteeing high performance and renowned for their robustness and reliability, is the result of an integrated philosophy developed entirely within the company, the hallmark of Made-in-Italy distinction with the indispensable objective of the maximum standards of safety and efficiency. The selection of materials, the development and the creativity of new projects and production technology, labour force and national services allows to safeguard the product quality and the wellness of the complete production chain.
Made in Italy
Boschetti has always looked towards the future with technological innovations driven by a philosophy inspired by respect for the environment and the rational use of energy resources. It is also for this reason that a 200 kW photovoltaic system is used to power the factory and offices of the entire company, allowing vital energy to be produced from renewable sources.
Boschetti for the environment
Since 1960 we have produced your hot water
Welding plant for domestic use tanks
Tanks pressure test
Press plant
Welding plant for industrial use tanks
Sandblasting plant
Painting plant
Functional test of products
Page 2
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Page 3
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
VERTICAL ELECTRIC WALL HANG WATER HEATERS ENERGY SAVING
BSEGOLD Vertical electric wall hang water heater energy saving
BSETGOLD Vertical electric wall hang water heater energy saving - Thermo version
BSETRONIC Vertical electric wall hang water heater energy saving
Page 4
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BSEGOLD VERTICAL ELECTRIC WALL HANG WATER HEATER ENERGY SAVING
This electric water heater, designed to enhance its energy efficiency characteristics, is suitable in particular for domestic users, where energy savings are required. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and double insulation characteristics of this model, available in several versions (from 56 to 100 litres, also in a thermo version), ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power. The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective phenolic epoxy resin finishes inside the tank, which are then polymerized at high temperatures. BSEGOLD brings domestic users all the necessary comfort and safety, thanks to a bipolar safety thermostat and a protection rating against water splashes of IPX4. The thermo version is also pre-fitted for a temperature probe. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples.
4 Electrical operation with single-phase 220 V 4 On the thermo version, the heat exchanger with a large surface
area has a cavity, with joints on two sides 4 Insulation consists in rigid polyurethane foam, free from
chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect"
4 The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stove-fired at 220°C, after being suitably treated
4 Thermostat adjustment knob 4 The product is supplied complete with an extra-large anode in
magnesium alloy 4 Guarantee 5 years
DESCRIPTION
Page 5
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BSEGOLD 50 BSEGOLD 80 BSEGOLD 100 D mm 460 460 460 H mm 625 825 985 h1 mm 255 230 280 G mm 489 489 489 g1 mm 86 86 86 i mm 120 120 120
AF - AC Ø 1/2" 1/2" 1/2"
TECHNICAL DATA BSEGOLD 50 BSEGOLD 80 BSEGOLD 100 Capacity L 56 80 100 Storage tank Pmax bar 8 8 8 Power W 1200 1200 1200 Voltage V 220-230 220-230 220-230 Single drawn at 40°C (1) L 112 160 200 Efficiency ΔT 45°C (2) L/h 23 23 23 24h consumption to mantain temperature kW 0,77 1,10 1,37
Weight Kg 22 25 28
ERP BSEGOLD 50 BSEGOLD 80 BSEGOLD 100 Energy class C C C Load profile M M L
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BSEGOLD VERTICAL ELECTRIC WALL HANG WATER HEATER
ENERGY SAVING
AF Cold water inlet
AC Hot water outlet
1 Heating element and thermostat unit
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C
TECHNICAL DATA AND DIMENSIONS
D
H
AC
AF
h1
G
g1
i
1
Page 6
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BSETGOLD 50 BSETGOLD 80 BSETGOLD 100 D mm 460 460 460 H mm 625 825 985 h1 mm 255 230 280 h2 mm 185 185 185 h3 mm 35 212 322 G mm 489 489 489 g1 mm 86 86 86 i mm 120 120 120
AF - AC Ø 1/2" 1/2" 1/2" MT - RT Ø 3/4” 3/4" 3/4”
TECHNICAL DATA BSETGOLD 50 BSETGOLD 80 BSETGOLD 100 Capacity L 56 80 100 Storage tank Pmax bar 8 8 8 Power W 1200 1200 1200 Voltage V 220-230 220-230 220-230 Single drawn at 40°C (1) L 112 160 200 Efficiency ΔT 45°C (2) L/h 23 23 23 24h consumption to mantain temperature kW 0,85 1,21 1,51
ERP BSETGOLD 50 BSETGOLD 80 BSETGOLD 100 Energy class C C C Load profile M M L
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
AF Cold water inlet
AC Hot water outlet
MT Thermo flow
RT Thermo return
1 Heating element and thermostat unit
2 Thermic sensor connection 1/2"
3 Thermic sensor sheath
* Sheath for temperature probe is not supplied. Lenght has to be 270 mm.
BSETGOLD VERTICAL ELECTRIC WALL HANG WATER HEATER
ENERGY SAVING - THERMO VERSION
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C (3) Heating fluid thermo 80°C
TECHNICAL DATA AND DIMENSIONS
H
D
h1
h3
h2
G
g1
i
AF
AC
1
2
3*
MT
MT
RT
RT
Page 7
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BSETRONIC VERTICAL ELECTRIC WALL HANG WATER HEATER ENERGY SAVING
This electric water heater, designed to enhance its energy efficiency characteristics, is suitable in particular for domestic users, where drastic energy savings are required. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and double insulation characteristics of this model, available in several versions (from 56 to 100 litres), ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power. BSETRONIC is equipped with IQuaFlex technology, which intuitively manages energy resources based on user preferences. Over the first two weeks of use, this thermostat records all the moments of greatest use of hot water. Subsequently, taking this consumption to be typical of the user's needs, this system automatically heats water at the moment of effective use, regulating water temperature and obtaining significant energy savings. The thermostat is also fitted with an automatic anti-legionella and anti-freezing device. A digital display mounted externally allows all functions to be monitored and controlled. The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective phenolic epoxy resin finishes inside the tank, which are then polymerized at high temperatures. BSETRONIC brings domestic users all the necessary comfort and safety, thanks to a bipolar safety thermostat and a protection rating against water splashes of IPX4. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples.
4 Electrical operation with single-phase 220 V 4 Insulation consists in rigid polyurethane foam, free from
chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect"
4 The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stove-fired at 220°C, after being suitably treated
4 Externally adjustable thermostat with digital display. Settings: holiday, IQuaFlex smart and manual
4 The product is supplied complete with an extra-large anode in magnesium alloy
4 Guarantee 5 years
DESCRIPTION
Page 8
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BSETRONIC 50 BSETRONIC 80 BSETRONIC 100 D mm 460 460 460 H mm 625 825 985 h1 mm 255 230 280 G mm 489 489 489 g1 mm 86 86 86 i mm 120 120 120
AF - AC Ø 1/2" 1/2" 1/2"
TECHNICAL DATA BSETRONIC 50 BSETRONIC 80 BSETRONIC 100 Capacity L 56 80 100 Storage tank Pmax bar 8 8 8 Power W 1200 1200 1200 Voltage V 220-230 220-230 220-230 Single drawn at 40°C (1) L 112 160 200 Efficiency ΔT 45°C (2) L/h 23 23 23 24h consumption to mantain temperature kW 0,77 1,10 1,37
Weight Kg 22 25 28
ERP BSETRONIC 50 BSETRONIC 80 BSETRONIC 100 Energy class B B B Load profile M M M
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BSETRONIC VERTICAL ELECTRIC WALL HANG WATER HEATER
ENERGY SAVING
AF Cold water inlet
AC Hot water outlet
1 Heating element and thermostat unit
2 Display
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C
TECHNICAL DATA AND DIMENSIONS
D
H
AC
AF
h1
G
g1
i
1
2
Page 9
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
ELECTRIC WATER HEATERS
BSE Vertical electric wall hang water heater
BSET Vertical electric wall hang water heater - Thermo version
BSEF Vertical electric wall hang water heater
BSER/Q Point of use wall hang water heater square over sink version
BSER/SQ Point of use wall hang water heater square under sink version
BSER/R Point of use wall hang water heater round over sink version
BSER/SR Point of use wall hang water heater round under sink version
BSEBC Storage electric water heater stand on commercial
BSETBC Storage electric water heater stand on commercial - Thermo version
BSEBD Electric water heater stand on domestic
OBSE Horizontal electric wall hang water heater
OBSET Horizontal electric wall hang water heater - Thermo version
Page 10
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BSE VERTICAL ELECTRIC WALL HANG WATER HEATER
This electric water heater, designed to give long-lasting service, is suitable for domestic users and for the needs of small businesses. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and insulation characteristics of this model, available in several versions (from 56 to 200 litres, also in a thermo version), ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power. The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective phenolic epoxy resin finishes inside the tank, which are then polymerized at high temperatures. BSE brings domestic users all the necessary comfort and safety, thanks to a bipolar safety thermostat and a protection rating against water splashes of IPX4. The thermo version is also pre-fitted for a temperature probe. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples.
4 Electrical operation with single-phase 220 V 4 On the thermo version, the heat exchanger with a large surface
area has a cavity, with joints on two sides 4 Insulation consists in rigid polyurethane foam, free from
chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect"
4 The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stove-fired at 220°C, after being suitably treated
4 The product is supplied complete with an extra-large anode in magnesium alloy
4 Guarantee from 3 to 5 years according to version
DESCRIPTION
Page 11
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BSE 50 BSE 80 BSE 100 BSE 120 BSE 150 BSE 200 D mm 440 440 440 440 490 490 H mm 580 780 940 1110 1100 1430 h1 mm 235 215 265 255 250 400 G mm 470 470 470 470 525 525 g1 mm 80 80 80 80 110 110 i mm 120 120 120 120 140 140
AF Ø 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" AC Ø 1/2" 1/2" 1/2" 1/2" 3/4" 3/4"
TECHNICAL DATA BSE 50 BSE 80 BSE 100 BSE 120 BSE 150 BSE 200 Capacity L 56 80 100 120 150 200 Storage tank Pmax bar 8 8 8 8 8 8 Power W 1200 1200 1200 1200 1500 2000 Voltage V 220-230 220-230 220-230 220-230 220-230 220-230 Single drawn at 40°C (1) L 112 160 200 240 300 400 Efficiency ΔT 45°C (2) L/h 23 23 23 23 29 38 Weight Kg 20 24 27 32 43 56
ERP BSE 50 BSE 80 BSE 100 BSE 120 BSE 150 BSE 200 Energy class D D D D Load profile M M L L
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BSE VERTICAL ELECTRIC WALL HANG WATER HEATER
AF Cold water inlet
AC Hot water outlet
1 Heating element and thermostat unit
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C
TECHNICAL DATA AND DIMENSIONS
D
H
AC
AF
h1
G
g1
i
1
Page 12
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BSET 50 BSET 80 BSET 100 BSET 120 BSET 150 BSET 200 D mm 440 440 440 440 490 490 H mm 580 780 940 1110 1100 1430 h1 mm 190 215 265 255 250 400 h2 mm 185 185 185 185 520 520 h3 mm 35 212 322 492 137 305 G mm 470 470 470 470 525 525 g1 mm 80 80 80 80 110 110 i mm 120 120 120 120 140 140
AF Ø 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" AC Ø 1/2" 1/2" 1/2" 1/2" 3/4” 3/4"
MT - RT Ø 3/4” 3/4" 3/4” 3/4" 3/4” 3/4"
TECHNICAL DATA BSET 50 BSET 80 BSET 100 BSET 120 BSET 150 BSET 200 Capacity L 56 80 100 120 150 200 Storage tank Pmax bar 8 8 8 8 8 8 Power W 1200 1200 1200 1200 1500 2000 Voltage V 220-230 220-230 220-230 220-230 220-230 220-230 Single drawn at 40°C (1) L 112 160 200 240 300 400 Efficiency ΔT45°C (2) L/h 23 23 23 23 29 38 Exchanger surface m² 0,33 0,33 0,33 0,33 0,87 0,87 THERMO
ERP BSET 50 BSET 80 BSET 100 BSET 120 BSET 150 BSET 200 Energy class D D D D Load profile M M L L
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
AF Cold water inlet
AC Hot water outlet
MT Thermo flow
RT Thermo return
1 Heating element and thermostat unit
2 Thermic sensor connection 1/2"
3 Thermic sensor sheath
* Sheath for temperature probe is not supplied. Lenght has to be 270 mm.
BSET VERTICAL ELECTRIC WALL HANG WATER HEATER -
THERMO VERSION
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C (3) Heating fluid thermo 80°C
TECHNICAL DATA AND DIMENSIONS
H
D
h1
h3
h2
G
g1
i
AF
AC
1
2
3 *
MT
MT
RT
RT
Page 13
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BSEF VERTICAL ELECTRIC WALL HANG WATER HEATER
This electric water heater, is suitable for domestic users and for the needs of small businesses. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and insulation characteristics of this model, available in several versions (50 - 80 - 100 litres), ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power. The attentive preparation of materials and exclusive assembly methods guarantee the perfect perfect application of protective resin finishes (vitreous enamel) inside the tank. BSEF brings domestic users all the necessary comfort and safety, thanks to a bipolar safety thermostat and a protection rating IP 23.
4 Electrical operation with single-phase 220-240 V 4 Insulation consists in rigid polyurethane foam 4 The sheet metal housing, attractively designed and carefully
constructed, is finished with a coating of white resins stove-fired at 220°C, after being suitably treated
4 The product is supplied complete with an anode in magnesium alloy
4 External knob for temperature regulation 4 Flange with 5 bolts for coupling the heating unit 4 Guarantee 3 years
DESCRIPTION
Page 14
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BSEF 50 BSEF 80 BSEF 100 D mm 440 440 440 H mm 545 750 970 h1 mm 200 180 180 h2 mm 265 265 264 G mm 460 460 460 g1 mm 130 130 130 i mm 100 100 100
AF Ø 1/2" 1/2" 1/2" AC Ø 1/2" 1/2" 1/2"
TECHNICAL DATA BSEF 50 BSEF 80 BSEF 100 Capacity L 50 80 100 Storage tank Pmax bar 8 8 8 Power W 1200 1200 1500
Voltage V 220-240 220-240 220-240
Frequency Hz 50/60 50/60 50/60 Heating time ΔT45°C hh:mm 02:10 03:30 03:30 Protection rating IP 23 IP 23 IP 23 Weight Kg 19 24 28
ERP BSEF 50 BSEF 80 BSEF 100 Energy class D D D Load profile M M L
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BSEF VERTICAL ELECTRIC WALL HANG WATER HEATER
AF Cold water inlet
AC Hot water outlet
1 Heating element and thermostat unit
TECHNICAL DATA AND DIMENSIONS
D
H
AC
AF
h1
G
g1
i
1
h2
Page 15
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
OBSE HORIZONTAL ELECTRIC WALL HANG WATER HEATER
This electric water heater, designed to give long-lasting service, is suitable for domestic users and for the needs of small businesses. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and insulation characteristics of this model ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power, due above all to the position of the heating element, which allows a higher efficiency to be obtained, together with easier maintenance. The position of hot water joints also ensures great versatility in adapting the heater to any system. On the OBSE model, available in several versions (from 56 to 200 litres, also in a thermo version), the attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective phenolic epoxy resin finishes inside the tank, which are then polymerized at high temperatures. OBSE brings domestic users all the necessary comfort and safety, thanks to a bipolar safety thermostat. The thermo version is also pre-fitted for a temperature probe. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples.
4 Electrical operation with single-phase 220 V 4 On the thermo version, the heat exchanger with a large surface
area has a cavity, with joints on the right 4 Insulation consists in rigid polyurethane foam, free from
chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect"
4 The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stove-fired at 220°C, after being suitably treated
4 The product is supplied complete with an extra-large anode in magnesium alloy
4 Guarantee 5 years
DESCRIPTION
Page 16
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS OBSE 50 OBSE 80 OBSE 100 OBSE 120 OBSE 150 OBSE 200 D mm 440 440 440 440 490 490 L mm 540 740 900 1070 1055 1385
L1 mm 100 265 385 560 585 585 d1 mm 240 240 240 240 270 270 d2 mm 65 65 65 65 90 90 i mm 160 160 160 160 160 160
AF Ø 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" AC Ø 1/2" 1/2" 1/2" 1/2" 3/4" 3/4"
Capacity L 56 80 100 120 150 200 Storage tank Pmax bar 8 8 8 8 8 8 Power W 1200 1200 1200 1200 1500 2000 Voltage V 220-230 220-230 220-230 220-230 220-230 220-230 Single drawn at 40°C (1) L 90 128 160 192 240 320 Efficiency ΔT45°C (2) L/h 23 23 23 23 29 38 Weight Kg 21 26 29 33 45 57
ERP OBSE 50 OBSE 80 OBSE 100 OBSE 120 OBSE 150 OBSE 200 Energy class D D D D Load profile M M M L
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
OBSE HORIZONTAL ELECTRIC WALL HANG WATER HEATER
AF Cold water inlet
AC Hot water outlet
1 Heating element and thermostat unit
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C
TECHNICAL DATA AND DIMENSIONS
AC AF 1
D
i
=
=
=
=
L1
L
d1
d2
Page 17
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS OBSET 80 OBSET 100 OBSET 120 OBSET 150 OBSET 200 D mm 440 440 440 490 490 L mm 740 900 1070 1055 1385
L1 mm 265 385 560 585 585 L2 mm 125 125 130 200 200 d1 mm 240 240 240 270 270 d2 mm 65 65 65 90 90 i mm 160 160 160 160 160
AF Ø 1/2" 1/2" 1/2" 1/2" 1/2" AC Ø 1/2" 1/2" 1/2" 3/4” 3/4"
MT - RT Ø 3/4" 3/4” 3/4" 3/4” 3/4"
TECHNICAL DATA OBSET 80 OBSET 100 OBSET 120 OBSET 150 OBSET 200 Capacity L 80 100 120 150 200 Storage tank Pmax bar 8 8 8 8 8 Power W 1200 1200 1200 1500 2000 Voltage V 220-230 220-230 220-230 220-230 220-230 Single drawn at 40°C (1) L 100 120 144 180 240 Efficiency ΔT45°C (2) L/h 23 23 23 29 38 Exchanger surface m² 0,21 0,33 0,33 0,35 0,60 THERMO
ERP OBSET 80 OBSET 100 OBSET 120 OBSET 150 OBSET 200 Energy class D D D Load profile M M L
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
* Sheath for temperature probe is not supplied. Lenght has to be 270 mm.
OBSET HORIZONTAL ELECTRIC WALL HANG WATER HEATER -
THERMO VERSION
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C (3) Heating fluid thermo 80°C
TECHNICAL DATA AND DIMENSIONS
AC AF
MT
RT 1
2
3 i
=
=
= = L1
L
L2
d1
d2
D
AF Cold water inlet
AC Hot water outlet
MT Thermo flow
RT Thermo return
1 Heating element and thermostat unit
2 Thermic sensor connection 1"¼
3 Thermic sensor sheath
Page 18
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BSER POINT OF USE WALL HANG WATER HEATER
This type of electric water heater (available from 10 to 15 and 30 litres, in a round or square version, with joints suitable for installation above or below a sink) is suitable for the limited supplies of hot water typical of kitchens, bathrooms or showers. It is the ideal solution in situations where hot water is needed rapidly, reaching full operating temperature in a very short time (for example, just 30 minutes for a shower with an average flow). The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective phenolic epoxy resin finishes inside the tank, which are then polymerized at high temperatures. BSER brings domestic users all the necessary comfort and safety, thanks to a bipolar safety thermostat and a protection rating against water splashes of IPX4. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples.
4 Electrical operation with single-phase 220 V 4 Insulation consists in rigid polyurethane foam, free from
chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect"
4 According to the version, the carefully designed and constructed external housing is made in impact-resistant hot-moulded polystyrene for square models, and for round models, in sheet metal coated with white resins stove-fired at 220°C, after being suitably treated
4 The product is supplied complete with an extra-large anode in magnesium alloy
4 Guarantee from 3 to 5 years according to version
DESCRIPTION
Page 19
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BSER/Q 10 BSER/SQ 10 L mm 355 355 H mm 405 405 h1 mm 190 190 a mm 120 120 P mm 190 190 i mm 145 145
AF Ø 1/2" 1/2" AC Ø 1/2" 1/2"
TECHNICAL DATA BSER/Q 10 BSER/SQ 10 Capacity L 10 10 Storage tank Pmax bar 8 8 Power W 1200 1200 Voltage V 220-230 220-230 Single drawn at 40°C (1) L 20 20 Efficiency ΔT45°C (2) L/h 23 23 Weight Kg 6,5 6,5
ERP BSER/Q 10 BSER/SQ 10 Energy class A B Load profile XXS XXS
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BSER POINT OF USE WALL HANG WATER HEATER
AF Cold water inlet
AC Hot water outlet
1 Heating element and thermostat unit
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C
TECHNICAL DATA AND DIMENSIONS
SQUARE OVER SINK VERSION BSER/Q
SQUARE UNDER SINK VERSION BSER/SQ
AF
AC
1
1
AF
AC
i
i
P
P
=
=
a
= = a
L
L
h1
h1
H
H
Page 20
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BSER/R 10 BSER/R 15 BSER/R 30 BSER/SR 10 BSER/SR 15 D mm 400 400 460 400 400 h1 mm 100 100 115 100 100 a mm 90 90 90 90 90 P mm 210 255 330 210 255 i mm 145 145 145 145 145
AF Ø 1/2" 1/2" 1/2" 1/2" 1/2" AC Ø 1/2" 1/2" 1/2" 1/2" 1/2”
TECHNICAL DATA BSER/R 10 BSER/R 15 BSER/R 30 BSER/SR 10 BSER/SR 15 Capacity L 10 15 30 10 15 Storage tank Pmax bar 8 8 8 8 8 Power W 1200 1500 1500 1200 1500 Voltage V 220-230 220-230 220-230 220-230 220-230 Single drawn at 40°C (1) L 20 30 60 20 30 Efficiency ΔT45°C (2) L/h 23 29 29 23 29 Weight Kg 7,5 8 10,5 7,5 8
ERP BSER/R 10 BSER/R 15 BSER/R 30 BSER/SR 10 BSER/SR 15 Energy class A A B B B Load profile XXS XXS S XXS XXS
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BSER POINT OF USE WALL HANG WATER HEATER
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C
TECHNICAL DATA AND DIMENSIONS
10-15
30
AC
1 AF AC
1
AF
i
i
= = a
= = a
D
D
P
P
h1
h1
AF Cold water inlet
AC Hot water outlet
1 Heating element and thermostat unit
ROUND OVER SINK VERSION BSER/R
ROUND UNDER SINK VERSION BSER/SR
Page 21
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BSEBD ELECTRIC WATER HEATER STAND ON DOMESTIC
This electric water heater, designed to give long-lasting service, is suitable in particular for domestic users. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and insulation characteristics of this model, available in several versions (from 150 and 200 litres), ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power. BSEBD brings domestic users all the necessary comfort and safety thanks to a bipolar safety thermostat. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective phenolic epoxy resin finishes inside the tank, which are then polymerized at high temperatures.
4 Electrical operation with single-phase 220 V 4 Insulation consists in rigid polyurethane foam, free from
chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect"
4 The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stove-fired at 220°C, after being suitably treated
4 The product is supplied complete with an extra-large anode in magnesium alloy
4 Guarantee 3 years
DESCRIPTION
Page 22
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BSEBD 150 BSEBD 200 D mm 490 490 H mm 1060 1390 h1 mm 1135 1465 G mm 533 533 g1 mm 89 89 i mm 140 140
AF - AC Ø 1/2" 1/2" S Ø 3/4" 3/4"
TECHNICAL DATA BSEBD 150 BSEBD 200 Capacity L 150 200 Storage tank Pmax bar 8 8 Power W 1500 2000 Voltage V 220-230 220-230 Single drawn at 40°C (1) L 300 400 Efficiency ΔT45°C (2) L/h 29 38 Weight Kg 45 55
ERP BSEBD 150 BSEBD 200 Energy class Load profile
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BSEBD ELECTRIC WATER HEATER STAND ON DOMESTIC
AF Cold water inlet
AC Hot water outlet
S Water drain
1 Heating element and thermostat unit
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C
TECHNICAL DATA AND DIMENSIONS
AC AF
1
S
i
D
H
h1
G
g1
Page 23
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BSEBC STORAGE ELECTRIC WATER HEATER STAND ON COMMERCIAL
This electric water heater, designed to give long-lasting service, is suitable for prevalently commercial users. It is the ideal solution in situations where electrical power supplies have a limited cost. Nevertheless, the special technological features and insulation characteristics of this model, available in several versions (from 200 to 1000 litres, and also in a thermo version), ensure efficiencies significantly higher than similar products available on the market with the same characteristics of power. The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective resin finishes (vitreous enamel on versions up to 500 litres, and galvanization on radiator versions and for 800-litre and 1000-litre models), inside the tank. Electrical fittings consist in single-phase electrical heating elements of excellent quality and appropriate length and power, positioned to guarantee optimal operation, energy savings and the complete heating of all water in the tank. Suitably connected, these heating elements can operate with single-phase 220 V power, or with triple-phase 220 V or 380 V power, coordinated by a bipolar safety thermostat. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples.
4 On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides
4 Insulation in thick high-density glass wool, to ensure prolonged maintenance of temperatures
4 The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stove-fired at 220°C, after being suitably treated
4 The product is supplied complete with an extra-large anode in magnesium alloy
4 Guarantee 2 years
DESCRIPTION
Page 24
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BSEBC 200 BSEBC 300 BSEBC 400 BSEBC 500 BSEBC 800 BSEBC 1000 D mm 550 550 650 660 910 910 H mm 1155 1625 1570 1900 1595 1940 h1 mm 1205 1675 1635 1965 G mm 605 605 705 705 955 1030 g1 mm 90 90 90 90 i mm 140 140 140 140 S Ø 1” 1” 1” 1” 2” 2” R Ø 3/4" 3/4" 3/4" 3/4" 1”¼ 1”¼
AF Ø 3/4" 3/4" 1" 1" 2" 2" AC Ø 3/4" 3/4" 1" 1" 2" 2"
TECHNICAL DATA BSEBC 200 BSEBC 300 BSEBC 400 BSEBC 500 BSEBC 800 BSEBC 1000 Capacity L 200 300 400 500 800 1000 Storage tank Pmax bar 6 6 6 6 6 6 Power W 3 x 1200 3 x 1200 3 x 2000 3 x 2000 3 x 3000 6 x 1500 Voltage V 220-230/380 220-230/380 220-230/380 220-230/380 220-230/380 220-230/380 Single drawn at 40°C (1) L 400 600 800 1000 1600 2000 Efficiency ΔT45°C (2) L/h 69 69 115 115 172 172 Weight Kg 80 102 141 161 200 280
ERP BSEBC 200 BSEBC 300 BSEBC 400 BSEBC 500 BSEBC 800 BSEBC 1000 Energy class D Load profile XL
BSEBC STORAGE ELECTRIC WATER HEATER STAND ON
COMMERCIAL
TECHNICAL DATA AND DIMENSIONS
AC AF
AF Cold water inlet
AC Hot water outlet
S Water drain
R Recirculation
1 Heating element and thermostat unit
1 S 1
S
R
R
AF
AC D
H
h1
i
G G
g1
4Safety valve H2O is not included for the models BSEBC 800 - 1000
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BSEBC 200-300-400-500 BSEBC 800-1000
Page 25
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BSETBC 200 BSETBC 300 BSETBC 400 BSETBC 500 BSETBC 800 BSETBC 1000 D mm 550 550 650 660 910 910 H mm 1155 1625 1570 1900 1595 1940 h1 mm 1205 1675 1635 1965 h2 mm 435 435 465 465 480 580 h3 mm 220 490 490 490 490 490 G mm 605 605 705 705 955 1030 g1 mm 90 90 90 90 i mm 140 140 140 140 S Ø 1” 1” 1” 1” 2” 2” R Ø 3/4" 3/4" 3/4" 3/4" 1”¼ 1”¼
AF - AC Ø 3/4" 3/4" 1" 1" 2" 2" MT - RT Ø 1" 1" 1" 1" 1" 1"
Capacity L 200 300 400 500 800 1000 Storage tank Pmax bar 6 6 6 6 6 6 Power W 3 x 1200 3 x 1200 3 x 2000 3 x 2000 3 x 3000 6 x 1500 Voltage V 220-230/380 220-230/380 220-230/380 220-230/380 220-230/380 220-230/380 Single drawn at 40°C (1) L 400 600 800 1000 1600 2000 Efficiency ΔT45°C (2) L/h 69 69 115 115 172 172 Exchanger surface m² 0,5 1 1,2 1,2 1,7 1,7 THERMO
ERP BSETBC 200 BSETBC 300 BSETBC 400 BSETBC 500 BSETBC 800 BSETBC 1000 Energy class D Load profile XL
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BSETBC STORAGE ELECTRIC WATER HEATER STAND ON
COMMERCIAL - THERMO VERSION
TECHNICAL DATA AND DIMENSIONS
AF Cold water inlet
AC Hot water outlet
MT Thermo flow
RT Thermo return
S Water drain
R Recirculation
1 Heating element and thermostat unit
AC AF
AF
AC
MT
RT
MT
RT 1
1
S S
R R
BSETBC 200-300-400-500 BSETBC 800-1000
i
g1
G
G
D
H
h1
h2 h2
h3
h3
4Safety valve H2O is not included for the models BSEBC 800 - 1000
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C (3) Heating fluid thermo 80°C
Page 26
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
WOOD WATER HEATERS
BL Wood water heater
BLE Wood-electric water heater
BLET Wood-electric water heater - Thermo version
Page 27
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BL WOOD WATER HEATER
This water heater with zero costs for gas or electricity bills is designed for domestic users wishing to reduce their energy costs for the production of hot water. This model therefore offers characteristics of sustainability, a factor of primary importance for Boschetti. Easy installation, practical operation and safety are also guaranteed in the BLE version (with an electrical heating element to ensure the hot water supply if wood is not available) and the BLET version (where in addition to the electrical heating element, secondary heat sources can also be used). With a combustion chamber with a refractory lining and insulation in high-density glass wool, this water heater is able to generate a hot water supply suitable for the needs of entire families. The tank is finished in vitreous enamel on BL 115/150 and BLE 115/150 versions, and galvanized for 80-litre and BLET 115/150 versions. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. All models have the grate stove-enamelled at 830°C, guaranteeing shininess and resistance to impacts, scratches and heat.
4 On BLET versions, the heat exchangers have a cavity with joints on two sides on 115 and 150 litre versions and a double pipe with rear joints on 80 litre versions
4 The water heater is provided with a suitable coupling 1/2" for the installation of the safety combined temperature and pressure valve (TP), which controls and limits the temperature and pressure of the hot water inside the product. The combined temperature and pressure valve (TP) is a PED safety device
4 Insulation in thick high-density glass wool, to ensure prolonged maintenance of temperatures
4 The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stove-fired at 220°C, after being suitably treated
4 The product is supplied complete with an extra-large anode in magnesium alloy
4 Guarantee 3 years
DESCRIPTION
Page 28
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BL 80 BLE 80 BLE 115 BLE 150 D mm 350 350 440 440 H mm 1440 1440 1430 1630 h1 mm 1465 1465 1485 1685 G mm 415 415 505 505 i mm 130 130 120 120
AF - AC Ø 1/2" 1/2" 1/2" 1/2" S Ø 1” 1” 1” 1” 1 Ø 80 80 80 80 2 Ø 1/2" 1/2" 1/2" 1/2"
TECHNICAL DATA BL 80 BLE 80 BLE 115 BLE 150 Capacity L 80 80 115 150 Storage tank Pmax bar 8 8 8 8 Power W 1000 1000 1000 Voltage V 220-230 220-230 220-230 Efficiency ΔT45°C L/h 19 19 19 Weight Kg 54 54 78 81
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BL - BLE WOOD WATER HEATER
WOOD-ELECTRIC WATER HEATER
AF Cold water inlet
AC Hot water outlet
S Water drain
1 Connection for exhaust pipe
2 Connection for TP valve
3 Heating element and thermostat lenght mm 760
115-150 80
D
H
D
H h1
G
i
h1
G
i
AC AF AF
AC
1
1
S
S
2
2
3
TECHNICAL DATA AND DIMENSIONS
WOOD VERSION
BL WOOD-ELECTRIC VERSION
BLE
Page 29
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BLET 80 BLET 115 BLET 150 D mm 350 440 440 H mm 1440 1430 1630 h1 mm 1465 1485 1685 h2 mm 525 475 475 h3 mm 460 420 420 G mm 415 505 505 i mm 130 120 120
AF - AC Ø 1/2" 1/2" 1/2" MT - RT Ø 3/4" 3/4" 3/4"
S Ø 1” 1” 1” 1 Ø 80 80 80 2 Ø 1/2" 1/2" 1/2"
TECHNICAL DATA BLET 80 BLET 115 BLET 150 Capacity L 80 115 150 Storage tank Pmax bar 8 8 8 Power W 1000 1000 1000 Voltage V 220-230 220-230 220-230 Efficiency ΔT45°C L/h 19 19 19 Exchanger surface m² 0,14 0,60 0,60 THERMO
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
AF Cold water inlet
AC Hot water outlet
MT Thermo flow
RT Thermo return
BLET WOOD-ELECTRIC WATER HEATER - THERMO VERSION
TECHNICAL DATA AND DIMENSIONS
BLET 80 BLET 115-150
D
H h1
h2
h3
D
H h1
h2
h3
G
i
S
G
i
S
AC AF AC AF
MT
RT
MT
RT
1
2
3 1
2
3 S Water drain
1 Connection for exhaust pipe
2 Connection for TP valve
3 Heating element and thermostat lenght mm 760
115-150 80
Page 30
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
MULTIGAS WATER HEATERS
BGM Wall hang multigas storage water heater
BGMT Wall hang multigas storage water heater - Thermo version
BGM/CSTF Wall hang multigas water heater sealed chamber forced flow
BGM/BD Storage multigas water heater stand on domestic
BGM/BA Storage multigas water heater stand on commercial
BGM/T/BA Storage multigas water heater stand on commercial - Thermo version
BGM/BI Storage multigas water heater stand on industrial
BGMT/BI Storage multigas water heater stand on industrial - Thermo version
BGM/CS Storage multigas water heater sealed chamber
BGM/T/CS Storage multigas water heater sealed chamber - Thermo version
Page 31
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BGM WALL HANG MULTIGAS STORAGE WATER HEATER
This multigas water heater (pre-fitted for use with both LPG and methane) is designed for domestic needs. With its ample combustion chamber, a larger heat exchange surface and the use of internal insulation in spaces usually neglected in the products of competitors, this water heater is able to generate an outstanding internal distribution of heat. Also available in a thermo version , BGM brings the home a water heating efficiency of 86%, a value higher than that of other products on the market that declare the same characteristics of power. This means significant savings in fuel use and a beneficial reduction in the formation of limescale inside the heater. The burner and internal deflectors are made in stainless steel, to guarantee maximum efficiency and safety over time. The special non-return hood, which stops the appliance in case of the abnormal extraction of fumes, is made in aluminium, and also reduces the formation of condensation inside the combustion chamber. The advantages of the BGM model include the attentive preparation of materials and exclusive assembly methods, which guarantee the perfect application of protective resin finishes (vitreous enamel). The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples.
4 Designed with a low coefficient of heat loss and high efficiency, with condensation evaporation in compliance with the DIN EN 89 standard
4 Product with DVGW certification, guaranteeing high standards of efficiency and safety, in total respect of the environment
4 On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides
4 Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect"
4 The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stove-fired at 220°C, after being suitably treated
4 The product is supplied complete with an extra-large anode in magnesium alloy
4 Guarantee 3 years
DESCRIPTION
Page 32
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BGM/5Q BGM/8Q BGM/10Q BGM/12Q BGM/15Q D mm 440 440 440 440 440 H mm 755 960 1130 1270 1390 h1 mm 340 325 325 475 475 df mm 80 80 80 80 80 G mm 470 470 470 470 470 g1 mm 76 76 76 76 76 g2 mm 116 116 116 116 116 i mm 120 120 120 120 120
AF - AC Ø 1/2" 1/2" 1/2" 1/2" 1/2" EG Ø 1/2" 1/2" 1/2" 1/2" 1/2"
TECHNICAL DATA BGM/5Q BGM/8Q BGM/10Q BGM/12Q BGM/15Q Capacity L 50 80 100 120 140 Storage tank Pmax bar 8 8 8 8 8 Heat capacity kW 4,6 5,3 5,3 5,3 5,3 Single drawn at 40°C (1) L 100 160 200 240 280 Efficiency ΔT45°C (2) L/h 75 85 85 85 85 Consumption Natural Gas m³/h 0,49 0,56 0,56 0,56 0,56 Consumption LPG kg/h 0,36 0,42 0,42 0,42 0,42 Weight Kg 26 33 41 51 56
ERP BGM/5Q BGM/8Q BGM/10Q BGM/12Q BGM/15Q Energy class B B B B B Load profile M M M L L
TECHNICAL DATA AND DIMENSIONS
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BGM WALL HANG MULTIGAS STORAGE WATER HEATER
AF Cold water inlet
AC Hot water outlet
EG Gas inlet connection
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C
AF AC
EG
H
D
G
g1
i
h1
df
g2
4Natural Gas 4On demand LPG (BGM/ GPL)
Page 33
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BGMT/8Q BGMT/10Q BGMT/15Q D mm 440 440 440 H mm 960 1130 1390 h1 mm 325 325 475 h2 mm 185 185 185 h3 mm 180 180 185 df mm 80 80 80 G mm 470 470 470 g1 mm 76 76 76 g2 mm 116 116 116 i mm 120 120 120
AF - AC Ø 1/2" 1/2" 1/2" EG Ø 1/2" 1/2" 1/2"
TECHNICAL DATA BGMT/8Q BGMT/10Q BGMT/15Q Capacity L 80 100 140 Storage tank Pmax bar 8 8 8 Heat capacity kW 5,3 5,3 5,3 Single drawn at 40°C (1) L 160 200 280 Efficiency ΔT45°C (2) L/h 85 85 85 Consumption Natural Gas m³/h 0,56 0,56 0,56 Consumption LPG kg/h 0,42 0,42 0,42 Exchanger surface m² 0,33 0,33 0,33 THERMO
ERP BGMT/8Q BGMT/10Q BGMT/15Q Energy class B B B Load profile M M L
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
AF Cold water inlet
AC Hot water outlet
MT Thermo flow
RT Thermo return
EG Gas inlet connection
BGMT WALL HANG MULTIGAS STORAGE WATER HEATER -
THERMO VERSION
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C (3) Heating fluid thermo 80°C
TECHNICAL DATA AND DIMENSIONS
4Natural Gas 4On demand LPG (BGMT/ GPL)
AF AC
EG
MT
RT
H
D
df
G
g1
i
h1
g2
h2
h3
Page 34
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BGM/CSTF WALL HANG MULTIGAS WATER HEATER SEALED CHAMBER FORCED FLOW
This multigas water heater (pre-fitted for use with both LPG and methane) is designed for domestic users, ensuring savings, easy installation, practical operation and safety. With its ample sealed combustion chamber, a larger heat exchange surface and the use of internal insulation in spaces usually neglected in the products of competitors, this water heater is able to generate an outstanding internal distribution of heat. BGM/CSTF brings domestic users a water heating efficiency up to two times higher than that of other products on the market that declare the same characteristics of power. This means significant savings in fuel use and a beneficial reduction in the formation of limescale inside the heater. The burner and internal deflectors are made in stainless steel, to guarantee maximum efficiency and safety over time. The advantages of the BGM/CSTF model, available in two versions (from 75 to 115 litres, see chart below), include the attentive preparation of materials and exclusive assembly methods, which guarantee the perfect application of protective resin finishes (vitreous enamel). Designed from the outset with a coaxial discharge, combustion fumes are expelled from the top by a fan, combined with an air intake with a specific connector on the heater. In addition, the sealed combustion chamber eliminates the "chimney effect", which is the circulation of cold air through the outlet flue for fumes when the burner is turned off. Specific kits are available for conversion into a version with double discharge. The heater is equipped with an electronic control unit, an electric gas valve and electronic ignition. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples.
4 Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect"
4 The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stove-fired at 220°C, after being suitably treated
4 Flange for inspection and limescale removal 4 Combustion, ignition and turn-off controls on electronic panel 4 Electronic ignition with ionization flame detection 4 The product is supplied complete with an extra-large anode in
magnesium alloy 4 Guarantee 2 years
DESCRIPTION
Page 35
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BGM/8Q/CSTF BGM/12Q/CSTF H mm 1040 1400 h1 mm 835 1195 h2 mm 895 1255
AF - AC Ø 1/2" 1/2" EG Ø 3/8" 3/8" 1 Ø 60 60 2 Ø 38 38
TECHNICAL DATA BGM/8Q/CSTF BGM/12Q/CSTF Capacity L 75 115 Storage tank Pmax bar 6 6 Heat capacity kW 5,0 5,0 Water yeld kW 4,7 4,7 Single drawn at 25°C (1) L 150 231 Efficiency ΔT45°C L/h 85 85 Voltage V 220-240 220-240 Frequency Hz 50 50 Power consumption W 26 26 Weight Kg 49 74
ERP BGM/8Q/CSTF BGM/12Q/CSTF Energy class B B Load profile M L
TECHNICAL DATA AND DIMENSIONS
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BGM/CSTF WALL HANG MULTIGAS WATER HEATER SEALED
CHAMBER FORCED FLOW
AF Cold water inlet
AC Hot water outlet
EG Gas inlet connection
(1) Thermostat at 70°C. Flow water temperature 10°C.
4Natural Gas 4On demand LPG (BGM/CSTF GPL)
1 Outer diameter air inlet
2 Inner diameter exhaust fumes
AF AC EG
1
2
H
h1 h2
240
190
210
325
75
165
80 450
460
185
60
295
80
Page 36
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
EXAMPLE OF WATER SUPPLY SYSTEM
AF AC
1
2
3 4
5 6
7
AF - COLD WATER INLET
AC - HOT WATER OUTLET
1 – HYDRAULIC SAFETY DEVICE
2 – EXPANSION VESSEL
3 – WATER SOFTENER OR PURIFIER
4 – FILTER
5 – PRESSURE-REDUCING VALVE
6 – SHUT-OFF VALVE
7 – SHUT-OFF VALVE
DISCHARGE EXAMPLES
HORIZONTAL KIT
LENGTH OF CONNECTIONS AIR DISCHARGE
MAX 3 Mt without elbow junction
MAX 2 Mt with 1 elbow junction 90°
MAX 1 Mt with 2 elbow junctions 90°
VERTICAL KIT
LENGTH OF CONNECTIONS AIR DISCHARGE
MAX 2 Mt with 1 elbow junction 90°
SPLIT KIT
LENGTH OF CONNECTIONS AIR DISCHARGE
MAX 6 Mt without elbow junction
MAX 5 Mt with 1 elbow junction 90°
MAX 4 Mt with 2 elbow junctions 90°
MAX 3 Mt with 3 elbow junctions 90°
MAX 2 Mt with 4 elbow junctions 90°
MAX 1 Mt with 5 elbow junctions 90°
BGM/CSTF WALL HANG MULTIGAS WATER HEATER SEALED
CHAMBER FORCED FLOW
Page 37
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BGM/BD STORAGE MULTIGAS WATER HEATER STAND ON DOMESTIC
This multigas water heater (pre-fitted for use with both LPG and methane) is designed for domestic needs. With its ample combustion chamber, a larger heat exchange surface and the use of internal insulation in spaces usually neglected in the products of competitors, this water heater is able to generate an outstanding internal distribution of heat. BGM/BD brings domestic users a water heating efficiency of 86%, a value higher than that of other products on the market that declare the same characteristics of power. This means significant savings in fuel use and a beneficial reduction in the formation of limescale inside the heater. The burner and internal deflectors are made in stainless steel, to guarantee maximum efficiency and safety over time. The special non-return hood, which stops the appliance in case of the abnormal extraction of fumes, is made in aluminium, and also reduces the formation of condensation inside the combustion chamber. The advantages of the BGM/BD model include the attentive preparation of materials and exclusive assembly methods, which guarantee the perfect application of protective resin finishes (vitreous enamel). The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples.
4 Designed with a low coefficient of heat loss and high efficiency, with condensation evaporation in compliance with the DIN EN 89 standard
4 Product with DVGW certification, guaranteeing high standards of efficiency and safety, in total respect of the environment
4 Insulation in thick high-density glass wool, to ensure prolonged maintenance of temperatures
4 The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stove-fired at 220°C, after being suitably treated
4 The product is supplied complete with an extra-large anode in magnesium alloy
4 Guarantee 3 years
DESCRIPTION
Page 38
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BGM/11Q/BD BGM/15Q/BD BGM/20Q/BD D mm 490 490 490 H mm 1150 1400 1650 df mm 80 80 80 G mm 501 501 501 g1 mm 106 106 106 i mm 200 200 200
AF - AC Ø 3/4" 3/4" 3/4" EG Ø 1/2" 1/2" 1/2" S Ø 1” 1” 1” R Ø 3/4" 3/4" 3/4"
TECHNICAL DATA BGM/11Q/BD BGM/15Q/BD BGM/20Q/BD Capacity L 115 150 190 Storage tank Pmax bar 6 6 6 Heat capacity kW 8,2 8,2 8,2 Single drawn at 40°C (1) L 230 300 380 Efficiency ΔT45°C (2) L/h 132 132 132 Consumption Natural Gas m³/h 0,87 0,87 0,87 Consumption LPG kg/h 0,65 0,65 0,65 Weight Kg 49 65 78
ERP BGM/11Q/BD BGM/15Q/BD BGM/20Q/BD Energy class B B B Load profile L L L
TECHNICAL DATA AND DIMENSIONS
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BGM/BD STORAGE MULTIGAS WATER HEATER STAND ON
DOMESTIC
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C
4Natural Gas 4On demand LPG (BGM/BD GPL)
AF AC
EG
S
R
H
D
i
df
G
g1 45°
AF Cold water inlet
AC Hot water outlet
EG Gas inlet connection
S Water drain
R Recirculation
Page 39
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BGM/BA STORAGE MULTIGAS WATER HEATER STAND ON COMMERCIAL
This multigas water heater (pre-fitted for use with both LPG and methane) is designed to supply large quantities of hot water. With its ample combustion chamber (from 6 to 12 flues), a larger heat exchange surface and the use of internal insulation in spaces usually neglected in the products of competitors, this water heater is able to generate an outstanding internal distribution of heat. Also available in a thermo version, BGM/BA brings businesses, apartment blocks and communities a water heating efficiency of 87%, a value higher than that of other products on the market that declare the same characteristics of power. This means significant savings in fuel use and a beneficial reduction in the formation of limescale inside the heater. The burner is made in stainless steel, to guarantee maximum efficiency and safety over time. The special double anti-return hood, which stops the appliance in case of the abnormal extraction of fumes, is made in aluminium, and also reduces the formation of condensation inside the combustion chamber and increases the efficiency of the water heater. The advantages of the BGM/BA model include the attentive preparation of materials and exclusive assembly methods, which guarantee the perfect application of protective resin finishes (vitreous enamel, for versions up to 600 litres, and galvanization for all other models). The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples.
4 Designed with a low coefficient of heat loss and high efficiency, with condensation evaporation in compliance with the DIN EN 89 standard
4 Product with DVGW certification, guaranteeing high standards of efficiency and safety, in total respect of the environment
4 On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides
4 Insulation in thick high-density glass wool, to ensure prolonged maintenance of temperatures
4 The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stove-fired at 220°C, after being suitably treated
4 The product is supplied complete with an extra-large anode in magnesium alloy
4 Guarantee 2 years
DESCRIPTION
Page 40
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BGM15Q/BA BGM20Q/BA BGM30Q/BA BGM40Q/BA BGM50Q/BA BGM60Q/BA BGM80Q/BA BGM100Q/BA BGM150Q/BA BGM200Q/BA D mm 550 550 650 660 750 760 910 910 1210 1210 Df mm 100 100 120 120 140 140 140 140 140 140 H mm 1355 1600 1680 2050 1915 2255 2120 2490 2320 2820 G mm 620 620 725 725 825 825 975 975 1275 1275 i mm 140 140 140 140 140 140
Energy class B B B B C C D D Load profile L XL XL XL XXL XXL XXL XXL
TECHNICAL DATA AND DIMENSIONS
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BGM/BA STORAGE MULTIGAS WATER HEATER STAND ON
COMMERCIAL
AF Cold water inlet
AC Hot water outlet
EG Gas inlet connection
S Water drain
R Recirculation
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C
4Natural Gas 4On demand LPG (BGM/BA GPL)
4The following models the H2O safety valve is not included: BGM80Q-100Q-150Q-200Q/BA
H
D
df
i
G G
AF AC
AF
AC
S S
EG
R
EG
R
BGM15Q-60Q/BA BGM80Q-200Q/BA
Page 41
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BGM/T/20Q/BA BGM/T/30Q/BA BGM/T/50Q/BA BGM/T/60Q/BA D mm 550 650 750 760 Df mm 100 120 140 140 H mm 1600 1680 1915 2255 G mm 620 725 825 825 i mm 140 140 140 140
h1 mm 405 420 500 500 h2 mm 390 490 790 890
AF - AC Ø 3/4” 1” 1” 1” MT - RT Ø 1” 1” 1” 1” EG - S Ø 1/2" 1/2" 1/2" 1/2"
R Ø 3/4" 3/4" 1" 1"
TECHNICAL DATA BGM/T/20Q/BA BGM/T/30Q/BA BGM/T/50Q/BA BGM/T/60Q/BA Capacity L 200 300 470 590 Storage tank Pmax bar 6 6 6 6 Heat capacity kW 14 23,2 29,5 29,5 Single drawn at 40°C (1) L 400 600 940 1180 Efficiency ΔT45°C (2) L/h 226 380 477 477 Burner surface m² 1,1 1,7 2,3 2,8 Consumption Natural Gas m³/h 1,48 2,45 3,12 3,12 Consumption LPG kg/h 1,10 1,83 2,32 2,32 Exchanger surface m² 0,77 1,11 2,03 2,25 THERMO
ERP BGM/T/20Q/BA BGM/T/30Q/BA BGM/T/50Q/BA BGM/T/60Q/BA Energy class B B C C Load profile XL XL XXL XXL
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
AF Cold water inlet
AC Hot water outlet
MT Thermo flow
RT Thermo return
EG Gas inlet connection
S Water drain
R Recirculation
BGM/T/BA STORAGE MULTIGAS WATER HEATER STAND ON
COMMERCIAL - THERMO VERSION
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C (3) Heating fluid thermo 80°C
TECHNICAL DATA AND DIMENSIONS
4Natural Gas 4On demand LPG (BGM/T/BA GPL)
H
D
df
i
G
h1
h2
AF AC
S
EG
R
MT
RT
Page 42
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BGM/BI STORAGE MULTIGAS WATER HEATER STAND ON INDUSTRIAL
This multigas model (pre-fitted for use with both LPG and methane) has been designed exclusively for use in industrial installations. With its ample combustion chamber (from 22 to 26 flues), a larger heat exchange surface and the use of internal insulation in spaces usually neglected in the products of competitors, this water heater is able to generate an outstanding internal distribution of heat. BGM/BI brings multiple users and industrial buildings a water heating efficiency up to two times higher than that of other products on the market that declare the same characteristics of power. This means significant savings in fuel use and a beneficial reduction in the formation of limescale inside the heater. The burner is made in stainless steel, to guarantee maximum efficiency and safety over time. The special non-return hood, which stops the appliance in case of the abnormal extraction of fumes, is made in aluminium, and also reduces the formation of condensation inside the combustion chamber. The BGM/BI model is available in several versions (from 800 to 2000 litres, and also with thermo version). The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples.
4 On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides
4 Insulation in thick high-density glass wool, to ensure prolonged maintenance of temperatures
4 The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stove-fired at 220°C, after being suitably treated
4 The product is supplied complete with an extra-large anode in magnesium alloy
4 Guarantee 1 year
DESCRIPTION
WATER HEATER SUITABLE FOR INDUSTRIAL USE ONLY
Page 43
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BGM/800/BI BGM/1000/BI BGM/1500/BI BGM/2000/BI D mm 960 960 1210 1210 H mm 2075 2405 2445 2960 df mm 180 180 180 180 G mm 1070 1070 1285 1285
AF - AC Ø 2” 2” 2”½ 2”½ EG Ø 1/2” 1/2” 1/2” 1/2”
S - R Ø 2” 2” 2”½ 2”½
TECHNICAL DATA BGM/800/BI BGM/1000/BI BGM/1500/BI BGM/2000/BI Capacity L 800 1000 1500 2000 Storage tank Pmax bar 6 6 6 6 Heat capacity kW 47,4 53,3 80 80 Single drawn at 40°C (1) L 1600 2000 3000 4000 Efficiency ΔT45°C (2) L/h 770 867 1300 1300 Burner surface m² 4,5 5,5 7,2 7,8 Consumption Natural Gas m³/h 5 5,6 8,4 8,4 Consumption LPG kg/h 3,7 4,2 6,3 6,3 Weight Kg 390 460 637 750
TECHNICAL DATA AND DIMENSIONS
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BGM/BI STORAGE MULTIGAS WATER HEATER STAND ON
INDUSTRIAL
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C
4Natural Gas 4On demand LPG (BGM/BI GPL)
H
D df
G
AF
AC
S
EG
R
AF Cold water inlet
AC Hot water outlet
EG Gas inlet connection
S Water drain
R Recirculation
Page 44
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BGMT/800/BI BGMT/1000/BI BGMT/1500/BI BGMT/2000/BI D mm 960 960 1210 1210 H mm 2075 2405 2445 2960 df mm 180 180 180 180 G mm 1070 1070 1285 1285 h1 mm 745 745 780 780 h2 mm 600 900 900 1400
AF - AC Ø 2” 2” 2”½ 2”½ EG Ø 1/2” 1/2” 1/2” 1/2”
MT - RT Ø 2” 2” 2” 2” S - R Ø 2” 2” 2”½ 2”½
TECHNICAL DATA BGMT/800/BI BGMT/1000/BI BGMT/1500/BI BGMT/2000/BI Capacity L 800 1000 1500 2000 Storage tank Pmax bar 6 6 6 6 Heat capacity kW 47,4 53,3 80 80 Single drawn at 40°C (1) L 1600 2000 3000 4000 Efficiency ΔT45°C (2) L/h 770 867 1300 1300 Burner surface m² 4,5 5,5 7,2 7,8 Consumption Natural Gas m³/h 5 5,6 8,4 8,4 Consumption LPG kg/h 3,7 4,2 6,3 6,3 Exchanger surface m² 2 2,65 3,3 4,9 THERMO
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BGMT/BI STORAGE MULTIGAS WATER HEATER STAND ON
INDUSTRIAL - THERMO VERSION
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C (3) Heating fluid thermo 80°C
TECHNICAL DATA AND DIMENSIONS
4Natural Gas 4On demand LPG (BGMT/BI GPL)
H
D df
G
h1
h2
AF
AC
EG
S
R
MT
RT
AF Cold water inlet
AC Hot water outlet
MT Thermo flow
RT Thermo return
EG Gas inlet connection
S Water drain
R Recirculation
Page 45
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BGM/CS STORAGE MULTIGAS WATER HEATER SEALED CHAMBER
This multigas water heater (pre-fitted for use with both LPG and methane) is designed for industrial users, apartment blocks, communities and homes with multiple services. With its ample sealed combustion chamber (from 6 to 10 flues), a larger heat exchange surface and the use of internal insulation in spaces usually neglected in the products of competitors, this water heater is able to generate an outstanding internal distribution of heat. BGM/CS brings businesses, apartment blocks and large communities a water heating efficiency of 87%, a value higher than that of other products on the market that declare the same characteristics of power. This means significant savings in fuel use and a beneficial reduction in the formation of limescale inside the heater. The burner is made in stainless steel, to guarantee maximum efficiency and safety over time. Designed from the outset with a double discharge, combustion fumes are expelled from the top by a fan, and the air intake at the bottom has a specific connector on the heater. In addition, the sealed combustion chamber eliminates the "chimney effect", which is the circulation of cold air through the outlet flue for fumes when the burner is turned off. Specific kits are available for conversion into a coaxial version. The heater is equipped with an electronic control unit, an electric gas valve and electronic ignition. The advantages of the BGM/CS model, available in several versions (from 200 to 590 litres, and also with thermo version), include the attentive preparation of materials and exclusive assembly methods, which guarantee the perfect application of protective resin finishes (vitreous enamel). The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples.
4 Designed with a low coefficient of heat loss and high efficiency, with condensation evaporation in compliance with the DIN EN 89 standard
4 Product with DVGW certification, guaranteeing high standards of efficiency and safety, in total respect of the environment
4 On the thermo version, the heat exchanger with a large surface area has a cavity, with joints on two sides
4 Insulation in thick high-density glass wool, to ensure prolonged maintenance of temperatures
4 The sheet metal housing, attractively designed and carefully constructed, is finished with a coating of white resins stove-fired at 220°C, after being suitably treated
4 Electronic ignition with ionization flame detection 4 Combustion, ignition and turn-off controls on electronic panel 4 The product is supplied complete with an extra-large anode in
magnesium alloy 4 Guarantee 2 years
DESCRIPTION
Page 46
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BGM/CS STORAGE MULTIGAS WATER HEATER SEALED
CHAMBER
DIMENSIONS BGM20Q/CS BGM30Q/CS BGM40Q/CS BGM50Q/CS BGM60Q/CS D mm 550 650 660 750 760 H mm 1620 1715 2085 1940 2265 i mm 140 140 140 140 140
TECHNICAL DATA BGM20Q/CS BGM30Q/CS BGM40Q/CS BGM50Q/CS BGM60Q/CS Capacity L 200 300 400 470 590 Storage tank Pmax bar 6 6 6 6 6 Heat capacity kW 14 23,2 23,2 29,5 29,5 Single drawn at 40°C (1) L 400 600 800 940 1180 Efficiency ΔT45°C (2) L/h 226 378 378 472 472 Burner surface m² 1,1 1,7 2,2 2,3 2,8 Consumption Natural Gas m³/h 1,48 2,45 2,45 3,12 3,12 Consumption LPG kg/h 1,10 1,83 1,83 2,32 2,32 Weight Kg 108 145 164 220 252
ERP BGM20Q/CS BGM30Q/CS BGM40Q/CS BGM50Q/CS BGM60Q/CS Energy class B B B C C Load profile XL XL XL XXL XXL
TECHNICAL DATA AND DIMENSIONS
AF Cold water inlet
AC Hot water outlet
EG Gas inlet connection
S Water drain
R Recirculation
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C
4Natural Gas 4On demand LPG (BGM/CS GPL)
1 Air suction
2 Flue exhaust
3 Control panel
4 Solenoid gas valve
5 Electronic control panel
6 Adjustable flue exhaust fan
H
D
300
30°
i
150
80
130
AF AC
EG S
R
1
2
3
4
5
6
Page 47
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BGM/T/CS STORAGE MULTIGAS WATER HEATER SEALED
CHAMBER - THERMO VERSION
DIMENSIONS BGM/T/20Q/CS BGM/T/30Q/CS BGM/T/50Q/CS BGM/T/60Q/CS D mm 550 650 750 760 H mm 1620 1715 1940 2265 h1 mm 405 420 495 495 h2 mm 390 490 790 890 i mm 140 140 140 140
ERP BGM/T/20Q/CS BGM/T/30Q/CS BGM/T/50Q/CS BGM/T/60Q/CS Energy class B B C C Load profile XL XL XXL XXL
AF Cold water inlet
AC Hot water outlet
MT Thermo flow
RT Thermo return
EG Gas inlet connection
S Water drain
R Recirculation
(1) Thermostat at 70°C. Water flow temperature 15°C (2) Primary water temperature 15°C (3) Heating fluid thermo 80°C
1 Air suction
2 Flue exhaust
3 Control panel
4 Solenoid gas valve
5 Electronic control panel
6 Adjustable flue exhaust fan
H
D
300
30°
i
130
150
80
AF AC
EG S
R
MT
RT
h1
h2
1
2
3
4
5
6
TECHNICAL DATA AND DIMENSIONS
4Natural Gas 4On demand LPG (BGM/T/CS GPL)
Page 48
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
EXAMPLES OF AIR DRAWING PIPES AND SMOKES DISCHARGE BGM/CS STORAGE MULTIGAS WATER HEATER SEALED
CHAMBER
SPLIT KIT LENGHT OF SMOKES DISCHARGE (L)
MAX 6 Mt without elbow junction
MIN 1 Mt
LOAD LOSS FOR EACH QUARTER BEND = 1 Mt
LENGHT OF AIR DRAWING PIPES (L)
MAX 6 Mt without elbow junction
MIN 1 Mt
LOAD LOSS FOR EACH QUARTER BEND = 1 Mt
L
L
L
L
600
L
PARALLEL SPLIT KIT LENGHT OF SMOKES DISCHARGE (L)
MAX 5 Mt without elbow junction
MIN 1 Mt
LOAD LOSS FOR EACH QUARTER BEND = 1 Mt
LENGHT OF AIR DRAWING PIPES (L)
MAX 5 Mt without elbow junction
MIN 1 Mt
LOAD LOSS FOR EACH QUARTER BEND = 1 Mt
L
L COAXIAL KIT LENGHT OF SMOKES DISCHARGE (L)
MAX 3 Mt without elbow junction
MIN 1 Mt
LOAD LOSS FOR EACH QUARTER BEND = 1 Mt
LENGHT OF AIR DRAWING PIPES (L)
MAX 3 Mt without elbow junction
MIN 1 Mt
LOAD LOSS FOR EACH QUARTER BEND = 1 Mt
Page 49
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
HEAT PUMP WATER HEATERS AND TREATMENT UNITS
BSMPC Wall hang heat pump water heater
BSBPC Floor standing heat pump water heater
BUTPC Heat pump treatment unit
Page 50
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BSMPC WALL HANG HEAT PUMP WATER HEATER
This heat pump water heater is designed to exploit the heat of the air as an energy source for the heating of water. In this specific case, it allows much of the heat in the surrounding space to be recovered, thereby becoming an energy source for the production of hot water. Air is compressed inside the machine, where the greater pressure increases its temperature to values that can reach 90°C. In the condenser, made in a double layer of copper to ensure higher efficiency, this heat energy is transferred to the water, which can be heated up to about 60°C. When it passes through the expansion valve at the end of the cycle, the fluid returns to a state of low pressure, and is ready to start the thermodynamic cycle again. BSMPC is the wall-hung water heater that suits well to different applications, maintaining high range functionality. The advantages of this system, which is both ecological and economic, include easy operation, silent operation and low maintenance requirements. It has top performances for what concerns energy savings so that it is labelled with A+ class according to Erp classification which will become effective in 2017.
DESCRIPTION
4 COMPACT SIZE
4 HIGH EFFICIENCY ROTARY COMPRESSOR
4 ENVIRONMENTAL FRIENDLY GAS
4 ANTI-LEGIONELLA CYCLE
4 LOW NOISE
4 EASY INSTALLATION
4 GUARANTEE 5 YEARS
Page 51
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
TECHNICAL DATA BSMPC 90 Capacity L 90 Number of tanks nr 1 Average electrical power input Wel 210 Thermal power output Wth 1005 Integrated heating element power Wel 1200 Net weight (empty/loaded) kg 46 / 136 Maximum water pressure bar 7 Maximum air temperature °C 43 Minimum air temperature °C 4 Nominal air flow m³/h 130 Requested room value m³ 15 Electrical parameters V - Hz 230V - 50Hz Ingress protection rating IPX4 Legionella prevention system (at 70°C) automatic Modes Auto Eco Boost Type of gas R134a Gas quantity gr 530 Total heating time (according to EN 16147)(*) hh:mm 05:30 Heating time in BOOST mode (*) hh:mm 02:25 Heating coil wrapped around the tank nr 1
ERP BSMPC 90 Energy class A Load profile M
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product.
BSMPC WALL HANG HEAT PUMP WATER HEATER
(*) Inlet air temperature 20°C (15°C max), 20°C at the storage, heating of water from 10°C to 55°C.
TECHNICAL DATA
BSMPC 90
Page 52
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BSMPC 90 AF Ø 1/2" AC Ø 1/2" S Ø 1/2"
A1 Ø mm 125 A2 Ø mm 125 A mm 248 B mm 542 C mm 259 D mm 550 E mm 187 F mm 280 H mm 1392 h1 mm 652 i mm 130
BSMPC WALL HANG HEAT PUMP WATER HEATER
H
h1
A
B
F
C
D
E
i
A2 AF A1 AC
S AE
DIMENSIONS
AF Cold water inlet
AC Hot water outlet
A1 Air inlet
A2 Air outlet
S Condensate drain
AE Power supply wire
Heat pump
Cold water inlet
7-bar
safety valve
EXAMPLE OF WATER SUPPLY SYSTEM
Hot water outlet
NOTICE. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
Page 53
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
INSTALLATION BSMPC WALL HANG HEAT PUMP WATER HEATER
The heat pump product range is designed to answer the needs of small, medium and big utilities, adapting to different living environments where the water heater can be installed. BSMPC is the water heater for indoor installation that recovers heat from air with positive temperatures from 4°C to 43°C. During the summer, the fresh air produced by the device can be used to create a pleasant heat reduction inside the installation room while during the winter the outlet air can be ducted outside.
LENGTH OF CONNECTIONS AIR DISCHARGE
MAX 8 Mt with 1 elbow junction 90°
MAX 6 Mt with 2 elbow junctions 90°
Connection type A Connection type B
Out
door
Out
door
WINTER
SUMMER
EXAMPLES OF INSTALLATION
Page 54
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BSBPC FLOOR STANDING HEAT PUMP WATER HEATER
This heat pump water heater is designed to exploit the heat of the air as an energy source for the heating of water. In this specific case, it allows much of the heat in the surrounding space to be recovered, thereby becoming an energy source for the production of hot water. Air is compressed inside the machine, where the greater pressure increases its temperature to values that can reach 90°C. In the condenser, made in a double layer of copper to ensure higher efficiency, this heat energy is transferred to the water, which can be heated up to about 60°C. When it passes through the expansion valve at the end of the cycle, the fluid returns to a state of low pressure, and is ready to start the thermodynamic cycle again. BSBPC series is the range of floor-standing heat pump water heaters. With a distinctive design and different models, this series answers the most different needs concerning operating modes and connection to the net, thanks to the additional coils available in the versions. The advantages of this system, which is both ecological and economic, include easy operation, silent operation and low maintenance requirements. On demand for the cold areas it is also available a special version (L version).
DESCRIPTION
4 COMPACT SIZE
4 HIGH EFFICIENCY ROTARY COMPRESSOR
4 ENVIRONMENTAL FRIENDLY GAS
4 ANTI-LEGIONELLA CYCLE
4 LOW NOISE
4 EASY INSTALLATION
4 GUARANTEE 5 YEARS
Page 55
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BSBPC 160A
BSBPC 200A
BSBPC 200AS
BSBPC 260A
BSBPC 260AS
BSBPC 260AST
L L L XL XL XL
986 kWh/annum
929 kWh/annum
929 kWh/annum
1384 kWh/annum
1384 kWh/annum
1384 kWh/annum
986 kWh/annum
929 kWh/annum
929 kWh/annum
1384 kWh/annum
1384 kWh/annum
1384 kWh/annum
986 kWh/annum
929 kWh/annum
929 kWh/annum
1384 kWh/annum
1384 kWh/annum
1384 kWh/annum
59 dB 59 dB 59 dB 59 dB 59 dB 59 dB
57 dB 57 dB 57 dB 57 dB 57 dB 57 dB
TECHNICAL DATA BSBPC 160A
BSBPC 200A
BSBPC 200AS
BSBPC 260A
BSBPC 260AS
BSBPC 260AST
Capacity L 160 200 200 260 260 260 Average electrical power input Wel 370 370 370 370 370 370 Thermal power output Wth 1600 1600 1600 1600 1600 1600 Integrated heating element power Wel 1500 1500 1500 1500 1500 1500 Net weight (empty/loaded) kg 70 / 240 80 / 295 100 / 299 100 / 360 120 / 375 125 / 383 Maximum water pressure bar 7 7 7 7 7 7 Maximum air temperature °C 43 43 43 43 43 43 Minimum air temperature °C 4 4 4 4 4 4 Nominal air florw m³/h 350 350 350 350 350 350 Electrical parameters V - Hz 230V - 50Hz 230V - 50Hz 230V - 50Hz 230V - 50Hz 230V - 50Hz 230V - 50Hz Ingress protection rating IPX4 IPX4 IPX4 IPX4 IPX4 IPX4 Legionella prevention system (at 70°C) automatic automatic automatic automatic automatic automatic Modes Auto Eco Boost Auto Eco Boost Auto Eco Boost Auto Eco Boost Auto Eco Boost Auto Eco Boost Type of gas R134a R134a R134a R134a R134a R134a Gas quantity gr 900 900 900 900 900 900 Total heating time (according to EN 16147)(*) hh:mm 06:41 07:16 07:16 09:44 09:44 09:44
Heating coil wrapped around the tank nr 1 1 1 1 1 1 Heating coil for solar panel nr - - 1 - 1 1 Additional heating coil nr - - - - - 1
ERP BSBPC 160A
BSBPC 200A
BSBPC 200AS
BSBPC 260A
BSBPC 260AS
BSBPC 260AST
Energy class A A A A A A Load profile L L L XL XL XL
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product.
BSBPC FLOOR STANDING HEAT PUMP WATER HEATER
(*) Inlet air temperature 20°C (15°C max), 20°C at the storage, heating of water from 10°C to 55°C.
TECHNICAL DATA
Page 56
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BSBPC 160A
BSBPC 200A
BSBPC 200AS
BSBPC 260A
BSBPC 260AS
BSBPC 260AST
AF Ø 1” 1” 1” 1” 1” 1” AC Ø 1” 1” 1” 1” 1” 1” S Ø 1/2" 1/2" 1/2" 1/2" 1/2" 1/2" R Ø 3/4" 3/4" 3/4" 3/4" 3/4" 3/4"
D1 Ø mm 600 600 600 600 600 600 D2 Ø mm 650 650 650 650 650 650 H mm 1504 1714 1714 2000 2000 2000 h1 mm 68 68 68 68 68 68 h2 mm 894 1104 1104 1394 1394 1394 A mm 380 380 380 380 380 380
BSBPC FLOOR STANDING HEAT PUMP WATER HEATER
DIMENSIONS
AC
AF
S
R
A1 A2
1
1
2
2
3
3
A
D1
D2
h2
H
h1
AF Cold water inlet
AC Hot water outlet
S Condensate drain
R Recirculation
A1 Air inlet
A2 Air outlet
1 Coil for solar thermal power
2 Coil for auxiliary heat source
3 Probe immersion sleeve (only in models provided with it)
NOTICE. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
Page 57
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
EXAMPLE OF WATER SUPPLY SYSTEM BSBPC FLOOR STANDING HEAT PUMP WATER HEATER
1 – WATER INLET PIPE
2 – SHUT-OFF VALVE
3 – AUTOMATIC THERMOSTAT MIXING EQUIPMENT
4 – HEAT PUMP
5 – RICIRCULATION PUMP
6 – SPRING CHECK VALVE
7 – HOT WATER OUTLET
8 – SAFETY VALVE
9 – INSPECTIONABLE END OF DISCHARGE PIPE
10 – DRAIN TAP
11– EXPANSION VESSEL
INSTALLATION
The heat pump product range is designed to answer the needs of small, medium and big utilities, adapting to different living environments where the water heater can be installed. BSBPC series is perfect for the technical room where converges with other systems for the utilization of renewable energy sources: solar thermal, photovoltaic, biomass or geothermal. This range is composed by different models according to the installation requirements of the thermal system. The standard models (A series) work with positive air taken and then released inside (or outside, depending on the season). L series models (for cold areas) instead take the heat from air with either positive or negative temperature and can therefore be installed with single or double duct.
STANDARD MODELS (A SERIES)
MODELS FOR COLD AREAS (L SERIES)
Page 58
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BSBPC FLOOR STANDING HEAT PUMP WATER HEATER
In the summer the outlet fresh air, with thermal load from 6.000 to 9.000 BTU, can be used to produce a pleasant heat reduction inside the installation room while during the winter it can be ducted and released outside.
EXAMPLES OF INSTALLATION
WINTER
SUMMER
PREPARATION OF THE INSTALLATION SITE
MINIMUM SPACE
LENGTH OF CONNECTIONS AIR DISCHARGE
MAX 8 Mt with 1 elbow junction 90°
MAX 6 Mt with 2 elbow junctions 90°
X1 650
X2 650
X3 200
Y1 300
Out
door
Page 59
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
REMOTE CONNECTIONS
The water heater is configured to be connected to other remote systems, especially the photovoltaic and solar thermal systems. The user interface has two digital inputs that can control the heat pump functioning in order to optimize the performance of the solar thermal system and use the electric energy overproduction of the photovoltaic system to produce DHW even without any demand from the water circuit. In this case it is possible to transform electrical energy into thermal energy raising the water temperature up to the value set by the user (70°C default temperature). The S and ST models are provided with one or two additional coils that allow the connection to other thermal sources, such as the boiler or a geothermal source to maximize the connectivity of the thermal system and to allow a better energy management.
BSBPC FLOOR STANDING HEAT PUMP WATER HEATER
EXAMPLES OF REMOTE CONNECTIONS
Example of connection between a photovoltaic panel and a BSBPC water heater. The inverter manages the electrical energy flow that feeds the water heater.
Example of connection between a solar collector and a BSBPC water heater. The heat transferred by the sun heats the water inside the tank through the additional coil of the S and ST versions.
Integration between an hybrid panel PV-T (photovoltaic and thermal) and a BSBPC water heater. The control electronics manages the electrical and thermal flows between panel and water heater. Solution available for models S and ST.
Integration composed by a solar thermal collector, a heat generator (gas or biomass) and a BSBPC water heater with ST version.
Page 60
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BUTPC HEAT PUMP TREATMENT UNIT
This heat pump treatment unit is designed to exploit the heat of the air as an energy source for the heating of water. In this specific case, it allows much of the heat in the surrounding space to be recovered, thereby becoming an energy source for the production of hot water. Air is compressed inside the machine, where the greater pressure increases its temperature to values that can reach 90°C. In the condenser, made in a double layer of copper to ensure higher efficiency, this heat energy is transferred to the water, which can be heated up to about 60°C. When it passes through the expansion valve at the end of the cycle, the fluid returns to a state of low pressure, and is ready to start the thermodynamic cycle again. BUTPC is the innovate unit to be combined with an external water storage for the renewal of the sanitary water heater, ideal for renovation projects. It is equipped with two temperature probes to be installed into the remote water storage. Furthermore, the electronic control of BUTPC is programmed to drive a circulation pump and an heating element (both external, not included). The advantages of this system, which is both ecological and economic, include easy operation, silent operation and low maintenance requirements.
DESCRIPTION
4 COMPACT SIZE
4 HIGH EFFICIENCY ROTARY COMPRESSOR
4 ENVIRONMENTAL FRIENDLY GAS
4 AUTO-DEFROSTING SYSTEM
4 LOW NOISE
4 EASY INSTALLATION
4 GUARANTEE 5 YEARS
Page 61
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BUTPC V1 BUTPC V2
XL XL
1460 kWh/annum
1491 kWh/annum
1460 kWh/annum
1491 kWh/annum
1460 kWh/annum
1491 kWh/annum
60 dB 60 dB
55 dB 60 dB
TECHNICAL DATA BUTPC V1 BUTPC V2 Average electrical power input Wel 540 880 Thermal power output Wth 1900 2900 Heating element power Wel 1500 (not included) 1500 (not included) Net weight kg 26 35 Maximum water pressure bar - - Maximum air temperature °C 38 38 Minimum air temperature °C -7 -7 Nominal air florw m³/h 350/500 550/700 Electrical parameters V - Hz 230V - 50Hz 230V - 50Hz Ingress protection rating IPX4 IPX4 Legionella prevention system (at 70°C) automatic automatic Modes Auto Eco Boost Auto Eco Boost Type of gas R134a R134a Gas quantity gr 570 660 Total heating time (according to EN 16147)(*) hh:mm 08:29 05:44 Condenser type Plate Plate Cycle inversion No No Circulation pump Not included Not included Temperature probes for remote tank N° 2, included N° 2, included
ERP BUTPC V1 BUTPC V2 Energy class A A Load profile XL XL
BUTPC HEAT PUMP TREATMENT UNIT
(*) Inlet air temperature 20°C (15°C max), 20°C at the storage, heating of water from 10°C to 55°C.
TECHNICAL DATA
Page 62
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BUTPC V1 BUTPC V2 AF Ø 3/4" 3/4" AC Ø 3/4" 3/4" S Ø 1/2" 1/2"
A1 Ø mm 160 160 A2 Ø mm 160 160 A mm 430 430 B mm 720 720 C mm 550 550 D mm 545 545 E mm 580 580 F mm 70 70 G mm 275 275
DIMENSIONS BUTPC HEAT PUMP TREATMENT UNIT
EXAMPLE OF WATER SUPPLY SYSTEM
A1 A2
S
AF
AC
A
B
E F
C
D
G
NOTICE. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
1 – WATER INLET
2 – SHUT-OFF VALVE
3 – SAFETY VALVE
4 – HYDRAULIC CIRCUIT EXPANSION VESSEL
5 – AUTOMATIC MIXING VALVE
6 – HOT WATER OUTLET
7 – PRESSURE STABILISER
8 – INSPECTABLE DRAIN COLLECTOR
9 – RECIRCULATION PUMP
10 – HEAT PUMP
11– EXPANSION VESSEL (0,5/1 L) TECHNICAL WATER CIRCUIT
12 – AUTOMATIC AIR VENT VALVE
13 – BOILER
14 – NTC HIGHER PROBE (RED MARK)
15 – NTC LOWER PROBE (BLUE MARK)
16 – ELECTRICAL HEATING ELEMENT (IF PRESENT)
17 – CONDENSATE DRAIN
A – TECHNICAL COLD WATER OUTLET
B – TECHNICAL HOT WATER INLET
AF Cold water inlet
AC Hot water outlet
S Condensate drain
A1 Air inlet
A2 Air outlet
Page 63
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
INSTALLATION BUTPC HEAT PUMP TREATMENT UNIT
The heat pump product range is designed to answer the needs of small, medium and big utilities, adapting to different living environments where the water heater can be installed. The external unity BUTPC can be connected to tanks with vertical installation and capacity up to 500 liters, provided with a coil with a minimum surface of 1 m². Depending on the season, the outlet air can be ducted outside or spread inside the house creating a pleasant heat reduction.
PREPARATION OF THE INSTALLATION SITE MINIMUM SPACE
Boiler
MODEL BUTPC V1 BUTPC V2
X1 2000 mm 2000 mm
X2 (min) 300 mm 300 mm
X3 28 kg 36 kg
EXAMPLES OF INSTALLATION
INSTALLING A SINGLE CHANNEL
INSTALLING DUAL CHANNEL
LENGTH OF CONNECTIONS AIR DISCHARGE/AIR INTAKE
MAX 8 Mt with 1 elbow junction 90°
MAX 6 Mt with 2 elbow junctions 90°
REMOTE CONNECTIONS
BUTPC can aslo be connected to other remote energy systems. The user interface has two digital inputs that can control the heat pump functioning in order to optimize the performance of the solar thermal system and use the electric energy overproduction of the photovoltaic system to produce DHW even without any demand from the water circuit.
Page 64
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BOILERS WITH DOUBLE WALLED EXCHANGER
BDPO3R Insulated horizontal boiler with double walled 3 years
Page 65
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BDPO3R INSULATED HORIZONTAL BOILER WITH DOUBLE WALLED 3 YEARS
This horizontal boiler has an internal cavity that transfers the thermal energy of the hot water provided by external sources, like a heating appliance or solar panels, to the water in the main tank, making extra supplies of hot water available. Available in seven versions (from 80 to 500 litres), this model has a variety of applications ranging from domestic to commercial applications. The advantages of the BDPO3R model include the large heat exchange surface of the cavity, which surrounds more than two-thirds of the hot water tank. The attentive preparation of materials and exclusive assembly methods guarantee the perfect application of protective resin finishes (polymerized at high temperatures), enhancing the quality of the final product. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples.
4 Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect". For the models from 200 to 500 litres the insulation is in soft thick polyurethane (30 mm), finished externally in Skay pvc cover
4 Housing in white-painted sheet metal for models up to 150 litres
4 The exchanger can work with heated or solar water 4 Teflon treatment tank 4 The product is supplied complete with an extra-large anode in
magnesium alloy 4 Guarantee 3 years
DESCRIPTION
Page 66
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
ERP BDPO3R 80 BDPO3R 100 BDPO3R 125 BDPO3R 150 BDPO3R 200 BDPO3R 300 BDPO3R 500 Energy class E E E
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
BDPO3R INSULATED HORIZONTAL BOILER WITH DOUBLE
WALLED 3 YEARS
AF Cold water inlet
AC Hot water outlet
MT Thermo flow
RT Thermo return
AN Magnesium anode 1”¼
1 Sensor 1”¼
TECHNICAL DATA AND DIMENSIONS
D
G
h1
L
L1 L2 L3
L4
L7
L5 L6
AF
AC MT
RT
AN
1
Page 67
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BOILERS WITH WELDED COIL
BSSV Vertical boiler with welded coil
B2SSV Vertical boiler with 2 welded coils
BSSV PLUS Vertical boiler with welded coil Plus (for solar panels)
B2SSV PLUS Vertical boiler with 2 welded coils Plus (for solar panels)
BSSMV Vertical boiler with high power welded coil (for heat pump)
Page 68
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BSSV VERTICAL BOILER WITH WELDED COIL
This vertical boiler with a fixed heat exchanger has an internal coil that transfers the thermal energy of the hot water provided by external sources, like a heating appliance or solar panels, to the water in the tank, making extra supplies of hot water available. Available in seven versions (from 150 to 1000 litres), this model can provide the ideal solution for the hot water needs of a high number of users. The advantages of BSSV include its high efficiency, the result of the vertical position of the tank. In comparison to the horizontal position, the vertical position gives in fact a more concentrated stratification of heat, and therefore a greater conservation of thermal energy. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. The scrupulous preparation of materials and exclusive assembly methods guarantee the perfect application of vitreous enamel finishes, enhancing the quality of the final product.
4 For models up to 500 litres, insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect". For the 750-litre and 1000-litre versions, insulation is in soft thick polyurethane (100 mm), finished externally in Skay pvc cover
4 The exchanger can work with heated water or solar 4 Glass lined tank 4 Boilers up to 500 litres are supplied complete with a
magnesium alloy anode. 750-litre and 1000-litre boilers are supplied complete with an electronic anode
4 Guarantee 5 years
DESCRIPTION
Page 69
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
AF Cold water inlet 1” (BSSV 150…500) Cold water inlet 1”¼ (BSSV 750-1000)
AC Hot water outlet 1” (BSSV 150…500) Hot water outlet 1”¼ (BSSV 750-1000)
TECHNICAL DATA AND DIMENSIONS
BSSV VERTICAL BOILER WITH WELDED COIL
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
Page 70
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BSSV VERTICAL BOILER WITH WELDED COIL
EXAMPLE OF WATER SUPPLY SYSTEM
1 – FINE FILTER
2 – SHUTOFF VALVE
3 – PRESSURE-REDUCING VALVE
4 – CHEK, FILLING AND DRAINING VALVE
5 – BACKFLOW PREVENTER
6 – PRESSURE GAUGE
7 – SAFETY VALVE WITH MEMBRAN
8 – EXPANSION VESSEL
9 – DOMESTIC WATER MIXER
10 – SHUTOFF VALVE WITH DRAINAGE
11 – CIRCULATION PUMP WITH TIMER
EXAMPLE OF REMOTE CONNECTIONS
Page 71
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
B2SSV VERTICAL BOILER WITH 2 WELDED COILS
This vertical boiler with two welded heat exchangers has a pair of internal coils that transfer the thermal energy of the hot water provided by external sources, like a heating appliance or solar panels, to the water in the tank, making extra supplies of hot water available. Available in six versions (from 200 to 1000 litres), this model can provide the ideal solution for the hot water needs of a high number of users. The advantages of B2SSV include its high efficiency, the result of the vertical position of the tank. In comparison to the horizontal position, the vertical position gives in fact a more concentrated stratification of heat, and therefore a greater conservation of thermal energy. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. The scrupulous preparation of materials and exclusive assembly methods guarantee the perfect application of vitreous enamel finishes, enhancing the quality of the final product.
4 For models up to 500 litres, insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect". For the 750-litre and 1000-litre versions, insulation is in soft thick polyurethane (100 mm), finished externally in Skay pvc cover
4 The exchangers can work with heated water or solar 4 Glass lined tank 4 Boilers up to 500 litres are supplied complete with a
magnesium alloy anode. 750-litre and 1000-litre boilers are supplied complete with an electronic anode
4 Guarantee 5 years
DESCRIPTION
Page 72
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
AF Cold water inlet 1” (B2SSV 200…500) Cold water inlet 1”¼ (B2SSV 750-1000)
AC Hot water outlet 1” (B2SSV 200…500) Hot water outlet 1”¼ (B2SSV 750-1000)
B2SSV VERTICAL BOILER WITH 2 WELDED COILS
TECHNICAL DATA AND DIMENSIONS
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
Page 73
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
B2SSV VERTICAL BOILER WITH 2 WELDED COILS
EXAMPLE OF WATER SUPPLY SYSTEM
1 – FINE FILTER
2 – SHUTOFF VALVE
3 – PRESSURE-REDUCING VALVE
4 – CHEK, FILLING AND DRAINING VALVE
5 – BACKFLOW PREVENTER
6 – PRESSURE GAUGE
7 – SAFETY VALVE WITH MEMBRAN
8 – EXPANSION VESSEL
9 – DOMESTIC WATER MIXER
10 – SHUTOFF VALVE WITH DRAINAGE
11 – CIRCULATION PUMP WITH TIMER
EXAMPLE OF REMOTE CONNECTIONS
Page 74
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BSSV PLUS VERTICAL BOILER WITH WELDED COIL PLUS (FOR SOLAR PANELS)
This vertical boiler with a fixed heat exchanger has an internal coil that transfers the thermal energy of the hot water provided by external sources, and in particular by solar panels, to the water in the tank, making extra supplies of hot water available. Available in four versions (from 200 to 500 litres), this model can provide the ideal solution for the hot water needs of a high number of users. The advantages of BSSV PLUS include its high efficiency, the result of the vertical position of the tank. In comparison to the horizontal position, the vertical position gives in fact a more concentrated stratification of heat, and therefore a greater conservation of thermal energy. This boiler also has a solar electronic control unit and an electric pump that communicate with the solar panel using a sensor, allowing the circulation of hot water in the heat exchanger to be optimized. The BSSV PLUS pre-fitted for the connection of a solar expansion tank if desired. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. The scrupulous preparation of materials and exclusive assembly methods guarantee the perfect application of vitreous enamel finishes, enhancing the quality of the final product.
4 Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect"
4 The exchanger can work with heated water or solar 4 Glass lined tank 4 The boiler is equipped with a pre-mounted two lines solar
station and an electrically connected solar control unit 4 Furthermore the boiler provides the possibility for fixing the
solar expansion vessel 4 The product is supplied complete with an extra-large anode in
magnesium alloy 4 Guarantee 5 years (boiler) and 2 years (control unit and solar
assembly)
DESCRIPTION
Page 75
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS BSSV PLUS 200 BSSV PLUS 300 BSSV PLUS 400 BSSV PLUS 500 D1 Ø 500 550 650 650 D2 Ø 600 650 750 750
Height mm 1328 1532 1502 1777 AF mm 132 138 143 143 AC mm 1177 1398 1368 1633 FL mm 323 358 377 377
RS1 mm 676 768 753 893 AS1 mm 676 768 753 893
TECHNICAL DATA BSSV PLUS 200 BSSV PLUS 300 BSSV PLUS 400 BSSV PLUS 500
Capacity L 200 300 400 500 Storage tank Tmax °C 95 95 95 95 Storage tank Pmax bar 6 6 6 6 Exchanger surface m² 1,0 1,4 1,5 1,8
SOLAR EXCHANGER Exchanger capacity L 7,0 9,0 9,5 12,0
Exchanger Pmax bar 10 10 10 10 Weight Kg 85 113 136 149
ERP BSSV PLUS 200 BSSV PLUS 300 BSSV PLUS 400 BSSV PLUS 500 Energy class B B C C
TECHNICAL DATA AND DIMENSIONS
BSSV PLUS VERTICAL BOILER WITH WELDED COIL PLUS
(FOR SOLAR PANELS)
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
1 Sensor socket Ø20
2 Recirculation 1”
3 Sensor socket Ø20
4 Electrical heating resistance 1”½
5 Connection for thermometer 1/2”
6 Magnesium anode 1”½
7 Drainage 3/4”
AS1 Solar flow 1”
RS1 Solar return 1”
FL Inspection flange Ø180
FVE Fixing for expansion kit 2 x M8
AF Cold water inlet 1”
AC Hot water outlet 1”
Page 76
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BSSV PLUS VERTICAL BOILER WITH WELDED COIL PLUS
(FOR SOLAR PANELS)
EXAMPLE OF WATER SUPPLY SYSTEM
1 – FINE FILTER
2 – SHUTOFF VALVE
3 – PRESSURE-REDUCING VALVE
4 – CHEK, FILLING AND DRAINING VALVE
5 – BACKFLOW PREVENTER
6 – PRESSURE GAUGE
7 – SAFETY VALVE WITH MEMBRAN
8 – EXPANSION VESSEL
9 – DOMESTIC WATER MIXER
10 – SHUTOFF VALVE WITH DRAINAGE
11 – CIRCULATION PUMP WITH TIMER
EXAMPLE OF REMOTE CONNECTIONS
Page 77
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
B2SSV PLUS VERTICAL BOILER WITH 2 WELDED COILS PLUS (FOR SOLAR PANELS)
This vertical boiler with two welded heat exchangers has a pair of internal coils that transfer the thermal energy of the hot water provided by secondary sources, and in particular, for this model, by solar panels, to the water in the tank, making extra supplies of hot water available. Available in four versions (from 200 to 500 litres), this model can provide the ideal solution for the hot water needs of domestic and small commercial users. The advantages of B2SSV Plus include its high efficiency, the result of the vertical position of the tank. In comparison to the horizontal position, the vertical position gives in fact a more concentrated stratification of heat, and therefore a greater conservation of thermal energy. This boiler has a solar electronic control unit and an electric pump that communicate with the solar panel using a sensor, allowing the circulation of hot water in the heat exchanger to be optimized. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. The scrupulous preparation of materials and exclusive assembly methods guarantee the perfect application of vitreous enamel finishes, enhancing the quality of the final product.
4 Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect"
4 The exchangers can work with heated water or solar 4 Glass lined tank 4 The boiler is equipped with a pre-mounted two lines solar
station and an electrically connected solar control unit 4 Furthermore the boiler provides the possibility for fixing the
solar expansion vessel 4 The product is supplied complete with an extra-large anode in
magnesium alloy 4 Guarantee 5 years (boiler) and 2 years (control unit and solar
assembly)
DESCRIPTION
Page 78
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS B2SSV PLUS 200 B2SSV PLUS 300 B2SSV PLUS 400 B2SSV PLUS 500 D1 Ø 500 550 650 650 D2 Ø 600 650 750 750
Height mm 1328 1532 1502 1777 AF mm 132 138 143 143 AC mm 1177 1398 1368 1633 FL mm 323 358 376 376
RS1 mm 676 768 753 893 AS1 mm 676 768 753 893 RS2 mm 810 898 903 1098 AS2 mm 1050 1228 1183 1420
TECHNICAL DATA B2SSV PLUS 200 B2SSV PLUS 300 B2SSV PLUS 400 B2SSV PLUS 500
Capacity L 200 300 400 500 Storage tank Tmax °C 95 95 95 95 Storage tank Pmax bar 6 6 6 6 Higher exchanger surface m² 0,6 1,0 1,0 1,2
Higher exchanger Pmax bar 10 10 10 10 Lower exchanger surface m² 1,0 1,4 1,5 1,8
LOWER SOLAR EXCHANGER Lower exchanger capacity L 7,0 9,0 9,5 12,0
Lower exchanger Pmax bar 10 10 10 10 Weight Kg 95 129 151 165
ERP B2SSV PLUS 200 B2SSV PLUS 300 B2SSV PLUS 400 B2SSV PLUS 500 Energy class B B C C
TECHNICAL DATA AND DIMENSIONS
B2SSV PLUS VERTICAL BOILER WITH 2 WELDED COILS PLUS (FOR
SOLAR PANELS)
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
AS1 Solar flow 1”
RS1 Solar return 1”
AS2 Thermo flow 1”
RS2 Thermo return 1”
FL Flange inspection Ø180
FVE Fixing for expansion kit 2 x M8
AF Cold water inlet 1”
AC Hot water outlet 1”
1 Sensor socket Ø20
2 Recirculation 1”
3 Sensor socket Ø20
4 Electrical heating resistance 1”½
5 Connection for thermometer 1/2”
6 Magnesium anode 1”½
7 Drainage 3/4”
Page 79
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
B2SSV PLUS VERTICAL BOILER WITH 2 WELDED COILS PLUS (FOR
SOLAR PANELS)
EXAMPLE OF WATER SUPPLY SYSTEM
1 – FINE FILTER
2 – SHUTOFF VALVE
3 – PRESSURE-REDUCING VALVE
4 – CHEK, FILLING AND DRAINING VALVE
5 – BACKFLOW PREVENTER
6 – PRESSURE GAUGE
7 – SAFETY VALVE WITH MEMBRAN
8 – EXPANSION VESSEL
9 – DOMESTIC WATER MIXER
10 – SHUTOFF VALVE WITH DRAINAGE
11 – CIRCULATION PUMP WITH TIMER
EXAMPLE OF REMOTE CONNECTIONS
Page 80
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BSSMV VERTICAL BOILER WITH HIGH POWER WELDED COIL (FOR HEAT PUMP)
This vertical boiler with a welded heat exchanger has an internal coil that transfers the thermal energy of the hot water provided by external sources, like a heating appliance, solar panels or a heat pump, to the water in the tank, making extra supplies of hot water available. Available in four versions (from 200 to 500 litres), this model can provide the ideal solution for the hot water needs of a high number of users. The advantages of BSSMV include its high efficiency, the result of the vertical position of the tank. In comparison to the horizontal position, the vertical position gives in fact a more concentrated stratification of heat, and therefore a greater conservation of thermal energy. One of the important technological components is the coil, made with a special oval cross-section to increase turbulence and ensure high-efficiency heat exchange. The vast area of its heat-exchange surface makes it possible to produce large quantities of water even at low temperatures. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. The scrupulous preparation of materials and exclusive assembly methods guarantee the perfect application of vitreous enamel finishes, enhancing the quality of the final product.
4 Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect"
4 The exchangers can work with heated water or solar 4 Glass lined tank 4 The product is supplied complete with an extra-large anode in
magnesium alloy 4 Guarantee 5 years
DESCRIPTION
Page 81
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
TECHNICAL DATA BSSMV 200 BSSMV 300 BSSMV 400 BSSMV 500
Capacity L 200 300 400 500 Storage tank Tmax °C 95 95 95 95 Storage tank Pmax bar 6 6 6 6 Exchanger surface m² 2,8 3,7 4,7 5,8
THERMO EXCHANGER
Exchanger capacity L 14,0 18,0 30,0 37,0
Exchanger Pmax bar 10 10 10 10
Weight Kg 110 135 165 198
ERP BSSMV 200 BSSMV 300 BSSMV 400 BSSMV 500 Energy class B B C C
TECHNICAL DATA AND DIMENSIONS
BSSMV VERTICAL BOILER WITH HIGH POWER WELDED COIL
(FOR HEAT PUMP)
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
1 Sensor Ø20
2 Recirculation 1”
3 Sensor Ø20
4 Electrical heating resistance 1”½
5 Thermometer 1/2"
6 Magnesium anode 1”½
7 Drainage 3/4”
AS2 Thermo flow 1”
RS2 Thermo return 1”
FL Flange inspection Ø180
AF Cold water inlet 1”
AC Hot water outlet 1”
Page 82
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
BSSMV VERTICAL BOILER WITH HIGH POWER WELDED COIL
(FOR HEAT PUMP)
EXAMPLE OF WATER SUPPLY SYSTEM
1 – FINE FILTER
2 – SHUTOFF VALVE
3 – PRESSURE-REDUCING VALVE
4 – CHEK, FILLING AND DRAINING VALVE
5 – BACKFLOW PREVENTER
6 – PRESSURE GAUGE
7 – SAFETY VALVE WITH MEMBRAN
8 – EXPANSION VESSEL
9 – DOMESTIC WATER MIXER
10 – SHUTOFF VALVE WITH DRAINAGE
11 – CIRCULATION PUMP WITH TIMER
EXAMPLE OF REMOTE CONNECTIONS
Page 83
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
TANKS
SPUSV Floor standing vertical tank (with coil) “Puffer”
SAR Tank for cooled and hot water
SPUV Floor standing vertical tank (no coil) “Puffer”
Page 84
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
SPUSV FLOOR STANDING VERTICAL TANK (WITH COIL) “PUFFER"
This tank is designed to supply a reserve of heating water to support secondary sources, such as appliances fired with gas, oil or wood, kitchen ranges, fireplaces and other sources of secondary energy. The tank is fitted with a fixed welded-coil heat exchanger for the use of water from solar panels. Available in several versions (from 300 to 2000 litres), this model is guaranteed for operating pressures of 3 bar. The tank, made in thick sheet metal, is rough-finished internally and treated externally with rust-resistant paint.
4 For models up to 500 litres, insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect". For the models from 800 to 2000 litres, insulation is in soft thick polyurethane (100 mm), finished externally in Skay pvc cover
4 The exchanger can work with heated water or solar 4 Steel tank with any internal anti-corrosion treatment with
external protection paint only 4 Guarantee 5 years
DESCRIPTION
Page 85
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
ERP SPUSV 300 SPUSV 500 SPUSV 800 SPUSV 1000 SPUSV 1250 SPUSV 1500 SPUSV 2000 Energy class B C C C C C C
TECHNICAL DATA AND DIMENSIONS
SPUSV FLOOR STANDING VERTICAL TANK (WITH COIL)
“PUFFER”
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
1 Boiler flow 1”½
2 Heating system flow 1”½
3 Free disposal 1”½
4 Return of heating system 1”½
5 Heating flow high temperature 1”½
6 Heating flow low temperature 1”½
7 Gas, fuel or pellet boiler return 1”½
8 Wood boiler return 1”½
SD Sensor for heating and solar systems 1/2”
AS1 Solar flow 1”
RS1 Solar return 1”
Page 86
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
SPUV FLOOR STANDING VERTICAL TANK (NO COIL) “PUFFER”
This tank is designed to supply a reserve of heating water to support secondary sources, such as appliances fired with gas, oil or wood, kitchen ranges, fireplaces and other sources of secondary energy. Available in several versions (from 300 to 2000 litres), this model is guaranteed for operating pressures of 3 bar. The tank, made in thick sheet metal, is rough-finished internally and treated externally with rust-resistant paint.
4 For models up to 500 litres, insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect". For the models from 800 to 2000 litres, insulation is in soft thick polyurethane (100 mm), finished externally in Skay pvc cover
4 Steel tank with any internal anti-corrosion treatment with external protection paint only
4 Guarantee 5 years
DESCRIPTION
Page 87
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
ERP SPUV 300 SPUV 500 SPUV 800 SPUV 1000 SPUV 1250 SPUV 1500 SPUV 2000 Energy class B C C C C C C
TECHNICAL DATA AND DIMENSIONS
SPUV FLOOR STANDING VERTICAL TANK (NO COIL)
“PUFFER”
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
1 Boiler flow 1”½
2 Heating system flow 1”½
3 Free disposal 1”½
4 Return of heating system 1”½
5 Heating flow high temperature 1”½
6 Heating flow low temperature 1”½
7 Gas, fuel or pellet boiler return 1”½
8 Wood boiler return 1”½
SD Sensor for heating system 1/2”
Page 88
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
SAR TANK FOR COOLED AND HOT WATER
This tank is designed to provide a reserve of cooled water to support secondary sources, such as an air-conditioning system, but it can also be used to store hot water for sanitary purposes. The tank, made in thick sheet metal, is tested on all products and not just on a limited number of samples. Exclusive pressing and assembly methods and attentive preliminary treatments of all our tanks ensure that galvanization is carried out accurately.
4 Insulation consists in rigid polyurethane foam, free from chlorofluorocarbons (CFCs), hydrofluorocarbons (HFCs) and hydrochlorofluorocarbons (HCFCs), gases responsible for the depletion of the ozone layer, and amongst the causes of the "greenhouse effect"
4 External finishes are available in Skay pvc cover (SAR/SKAY version) or aluminium plate cover (SAR/AL version)
4 Galvanized steel tank 4 Guarantee 2 years
DESCRIPTION
Page 89
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
DIMENSIONS SAR/SKAY 100 SAR/AL 100
SAR/SKAY 200 SAR/AL 200
SAR/SKAY 300 SAR/AL 300
SAR/SKAY 500 SAR/AL 500
SAR/SKAY 750 SAR/AL 750
SAR/SKAY 1000 SAR/AL 1000
D Ø 470 520 620 720 820 870 H mm 1000 1370 1400 1680 1830 2000 h1 mm 245 270 305 320 340 350 h2 mm 825 1170 1165 1430 1560 1710 h3 mm 90 90 90 90 90 90
E/U Ø 1”¼ 2” 3” 3” 3” 3”
TECHNICAL DATA SAR/SKAY 100 SAR/AL 100
SAR/SKAY 200 SAR/AL 200
SAR/SKAY 300 SAR/AL 300
SAR/SKAY 500 SAR/AL 500
SAR/SKAY 750 SAR/AL 750
SAR/SKAY 1000 SAR/AL 1000
Capacity L 100 200 300 500 750 1000 Storage tank Tmax °C 95 95 95 95 95 95 Storage tank Pmax bar 6 6 6 6 6 6
ERP SAR/SKAY 100 SAR/AL 100
SAR/SKAY 200 SAR/AL 200
SAR/SKAY 300 SAR/AL 300
SAR/SKAY 500 SAR/AL 500
SAR/SKAY 750 SAR/AL 750
SAR/SKAY 1000 SAR/AL 1000
Energy class
NOTICE. The listed capacity is a guideline in order to identify the category of the product. The actual capacity is indicated in the specifications attached to the product. All specifications and immages are indicative. We reserve the right to change specifications without prior notice.
SAR TANK FOR COOLED AND HOT WATER
TECHNICAL DATA AND DIMENSIONS
H
D
h1
h2
h3 S
1
2
3
4
E/U
E/U
E/U
E/U
E/U Inlet / Outlet
S Water drain 1”¼
1 Sensor 1/2"
2 Thermometer 1/2"
3 Sensor 1/2"
4 Sensor 1”¼
Page 90
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58 - 36075 Montecchio Maggiore (VI) ITALIA - Tel. +39 0444 490636 - Fax +39 0444 490496 Internet: www.boschettindustriemeccaniche.it E-mail: [email protected]
Since 1960 we have produced your hot water
NOTES
Boschetti Industrie Meccaniche srl Via Bivio San Vitale, 58
36075 Montecchio Maggiore (VI) ITALIA Tel. +39 0444 490636 Fax +39 0444 490496